Tomb/tomb
2014-08-03 19:54:43 +02:00

2520 lines
77 KiB
Bash
Executable File

#!/bin/zsh
#
# Tomb, the Crypto Undertaker
#
# A commandline tool to easily operate encryption of secret data
#
# Homepage on: [tomb.dyne.org](http://tomb.dyne.org)
# {{{ License
# Copyright (C) 2007-2014 Dyne.org Foundation
#
# Tomb is designed, written and maintained by Denis Roio <jaromil@dyne.org>
#
# With contributions by Anathema, Boyska and Hellekin O. Wolf.
#
# Testing and reviews are contributed by Dreamer, Shining,
# Mancausoft, Asbesto Molesto and Nignux.
#
# Tomb's artwork is contributed by Jordi aka Mon Mort.
#This source code is free software; you can redistribute it
#and/or modify it under the terms of the GNU Public License
#as published by the Free Software Foundation; either
#version 3 of the License, or (at your option) any later
#version.
#
#This source code is distributed in the hope that it will be
#useful, but WITHOUT ANY WARRANTY; without even the implied
#warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#PURPOSE. Please refer to the GNU Public License for more
#details.
#
#You should have received a copy of the GNU Public License
#along with this source code; if not, write to: Free
#Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
#02139, USA.
# }}} - License
# {{{ Global variables
VERSION=1.5.3
DATE="Jun/2014"
TOMBEXEC=$0
typeset -a OLDARGS
for arg in ${argv}; do OLDARGS+=($arg); done
DD="dd"
WIPE="rm -f"
MKFS="mkfs.ext3 -q -F -j -L"
KDF=1
STEGHIDE=1
MKTEMP=1
RESIZER=1
SWISH=1
QRENCODE=1
MOUNTOPTS="rw,noatime,nodev"
typeset -A global_opts
typeset -A opts
typeset -h username
typeset -h _uid
typeset -h _gid
typeset -h _tty
# Make sure sbin is in PATH
PATH+=:/sbin:/usr/sbin
# }}}
# {{{ Safety functions
_have_shm() {
# Check availability of 1MB of SHM
_verbose "_have_shm 0 We need only 1 MB of RAM."
[[ -k /dev/shm ]] || return 1
local -i SHM RAM
SHM=$(df -k -B 4K -a -t tmpfs /dev/shm | awk '/\/dev\/shm/ { print $4; }')
(( $? )) && return 1
_verbose "_have_shm 1 SHM $SHM KB are available."
RAM=$(awk '/MemFree/ { print $2 }' /proc/meminfo)
_verbose "_have_shm 2 RAM $RAM KB are free."
(( $RAM >= 1024 )) && return 0
_verbose "_have_shm 3 RAM $RAM KB left only :("
# Now we have more RAM than affected to SHM, so we can expect some for our little needs.
# Does that work when SHM is disabled from kernel config?
return 1
}
# Create temporary directories with caution
safe_dir() {
# Try and create our temporary directory in RAM
# Note that there's no warranty the underlying FS won't swap
# every 5 seconds (e.g., ext3)
local -i tries
while (( $tries < 3 )) ; do
tries+=1
if _have_shm; then
_verbose "safe_dir creating $1 dir in RAM."
if (( $MKTEMP )); then
mktemp -d /dev/shm/tomb.$1.$$.XXXXXXX
else
dir="/dev/shm/tomb.$1.$$.$RANDOM$RANDOM"
mkdir -m 0700 -p "$dir"
print "$dir"
fi
return 0
else
_warning "WARNING: we cannot ensure we're running in RAM."
_verbose "Wait a bit before retrying... (attempt $tries)."
sync && sleep 0.5
fi
done
_warning "WARNING: no RAM available for me to run safely."
return 1
}
# Provide a random filename in shared memory
safe_filename() {
_have_shm || _failure "No access to shared memory on this system, sorry."
(( $MKTEMP )) && \
mktemp -u /dev/shm/tomb.$1.$$.XXXXXXX || \
print "/dev/shm/tomb.$1.$$.$RANDOM$RANDOM"
}
# Check if swap is activated
check_swap() {
# Return 0 if NO swap is used, 1 if swap is used
# Return 2 if swap(s) is(are) used, but ALL encrypted
local swaps="$(awk '/^\// { print $1 }' /proc/swaps 2>/dev/null)"
[[ -z "$swaps" ]] && return 0 # No swap partition is active
# Check whether all swaps are encrypted, and return 2
# If any of the swaps is not encrypted, we bail out and return 1.
ret=1
for s in $=swaps; do
bone=`sudo file $s`
if `echo "$bone" | grep 'swap file' &>/dev/null`; then
# It's a regular (unencrypted) swap file
ret=1
break
elif `echo "$bone" | grep 'symbolic link' &>/dev/null`; then
# Might link to a block
ret=1
if [ "/dev/mapper" = "${s%/*}" ]; then
is_crypt=`sudo dmsetup status "$s" | awk '/crypt/ {print $3}'`
if [ "crypt" = "$is_crypt" ]; then
ret=2
fi
else
break
fi
elif `echo "$bone" | grep 'block special' &>/dev/null`; then
# Is a block
ret=1
is_crypt=`sudo dmsetup status "$s" | awk '/crypt/ {print $3}'`
if [ "crypt" = "$is_crypt" ]; then
ret=2
else
break
fi
fi
done
_warning "An active swap partition is detected, this poses security risks."
if [[ $ret -eq 2 ]]; then
_success "All your swaps are belong to crypt. Good."
else
_warning "You can deactivate all swap partitions using the command:"
_warning " swapoff -a"
_warning "But if you want to proceed like this, use the -f (force) flag."
_failure "Operation aborted."
fi
return $ret
}
# Wrapper to allow encrypted swap and remind the user about
# possible data leaks to disk if swap is on, and not to be ignored
_check_swap() {
if ! option_is_set -f && ! option_is_set --ignore-swap; then
check_swap
case $? in
0|2) # No, or encrypted swap
return 0
;;
*) # Unencrypted swap
return 1
;;
esac
fi
}
# Ask user for a password
ask_password() {
# we use pinentry now
# comes from gpg project and is much more secure
# it also conveniently uses the right toolkit
# pinentry has no custom icon setting
# so we need to temporary modify the gtk theme
if [ -r /usr/local/share/themes/tomb/gtk-2.0-key/gtkrc ]; then
GTK2_RC=/usr/local/share/themes/tomb/gtk-2.0-key/gtkrc
elif [ -r /usr/share/themes/tomb/gtk-2.0-key/gtkrc ]; then
GTK2_RC=/usr/share/themes/tomb/gtk-2.0-key/gtkrc
fi
title="Insert tomb password."
if [ $2 ]; then title="$2"; fi
output=`cat <<EOF | GTK2_RC_FILES=${GTK2_RC} pinentry 2>/dev/null | tail -n +7
OPTION ttyname=$TTY
OPTION lc-ctype=$LANG
SETTITLE $title
SETDESC $1
SETPROMPT Password:
GETPIN
EOF`
if [[ `tail -n1 <<<$output` =~ ERR ]]; then
return 1
fi
head -n1 <<<$output | awk '/^D / { sub(/^D /, ""); print }'
return 0
}
# Drop privileges
exec_as_user() {
if ! [ $SUDO_USER ]; then
exec $@[@]
return $?
fi
_verbose "exec_as_user '$SUDO_USER': ${(f)@}"
sudo -u $SUDO_USER "${@[@]}"
return $?
}
#Escalate privileges
check_priv() {
# save original user
username=$USER
if [ $UID != 0 ]; then
_verbose "Using sudo for root execution of '${TOMBEXEC} ${(f)OLDARGS}'."
# check if sudo has a timestamp active
sudok=false
if ! option_is_set --sudo-pwd; then
if [ $? != 0 ]; then # if not then ask a password
cat <<EOF | pinentry 2>/dev/null | awk '/^D / { sub(/^D /, ""); print }' | sudo -S -v
OPTION ttyname=$TTY
OPTION lc-ctype=$LANG
SETTITLE Super user privileges required
SETDESC Sudo execution of Tomb ${OLDARGS[@]}
SETPROMPT Insert your USER password:
GETPIN
EOF
fi
else
_verbose "Escalating privileges using sudo-pwd."
sudo -S -v <<<`option_value --sudo-pwd`
fi
sudo "${TOMBEXEC}" -U ${UID} -G ${GID} -T ${TTY} "${(@)OLDARGS}"
exit $?
fi # are we root already
# check if we have support for loop mounting
losetup -f > /dev/null
{ test "$?" = "0" } || {
_warning "Loop mount of volumes is not supported on this machine, this error"
_warning "often occurs on VPS and kernels that don't provide the loop module."
_warning "It is impossible to use Tomb on this machine at this conditions."
_failure "Operation aborted."
}
# make sure necessary kernel modules are loaded
modprobe dm_mod 2>/dev/null
modprobe dm_crypt 2>/dev/null
return 0
}
# check if a filename is a valid tomb
is_valid_tomb() {
_verbose "is_valid_tomb $1"
# argument check
{ test "$1" = "" } && {
_warning "Tomb file is missing from arguments."; return 1 }
# file checks
{ test -r "$1" } || {
_warning "Tomb file not found: $1"; return 1 }
{ test -f "$1" } || {
_warning "Tomb file is not a regular file: $1"; return 1 }
# check file type (if its a Luks fs)
file "$1" | grep -i 'luks encrypted file' >/dev/null
{ test $? = 0 } || {
_warning "File is not a valid tomb: $1"; return 1 }
# check if its already open
tombfile=`basename $1`
tombname=${tombfile%%\.*}
mount -l | grep "${tombfile}.*\[$tombname\]$" > /dev/null
{ test $? = 0 } && {
_warning "Tomb is currently in use: $tombname"; return 1 }
_message "Valid tomb file found: $1"
return 0
}
# }}}
# {{{ Commandline interaction
usage() {
cat <<EOF
Syntax: tomb [options] command [arguments]
Commands:
// Creation:
dig create a new empty TOMB file of size -s in MB
forge create a new KEY file and set its password
lock installs a lock on a TOMB to use it with KEY
// Operations on tombs:
open open an existing TOMB
index update the search indexes of tombs
search looks for filenames matching text patterns
list list of open TOMBs and information on them
close close a specific TOMB (or 'all')
slam slam a TOMB killing all programs using it
EOF
if [ "$RESIZER" = 1 ]; then
cat <<EOF
resize resize a TOMB to a new size -s (can only grow)
EOF
fi
cat <<EOF
// Operations on keys:
passwd change the password of a KEY
setkey change the KEY locking a TOMB (needs old one)
EOF
{ test "$QRENCODE" = "1" } && {
cat <<EOF
engrave makes a QR code of a KEY to be saved on paper
EOF
}
if [ "$STEGHIDE" = 1 ]; then
cat <<EOF
bury hide a KEY inside a JPEG image
exhume extract a KEY from a JPEG image
EOF
fi
cat <<EOF
Options:
-s size of the tomb file when creating/resizing one (in MB)
-k path to the key to be used ('-k -' to read from stdin)
-n don't process the hooks found in tomb
-o mount options used to open (default: rw,noatime,nodev)
-f force operation (i.e. even if swap is active)
EOF
{ test "$KDF" = 1 } && {
cat <<EOF
--kdf generate passwords armored against dictionary attacks
EOF
}
cat <<EOF
-h print this help
-v print version, license and list of available ciphers
-q run quietly without printing informations
-D print debugging information at runtime
For more informations on Tomb read the manual: man tomb
Please report bugs on <http://github.com/dyne/tomb/issues>.
EOF
}
# Check an option
option_is_set() {
# First argument, the commandline flag (i.e. "-s").
# Second (optional) argument: if "out", command will print it out 'set'/'unset'
# (useful for if conditions).
# Return 0 if is set, 1 otherwise
[[ -n ${(k)opts[$1]} ]];
r=$?
if [[ $2 == out ]]; then
if [[ $r == 0 ]]; then
echo 'set'
else
echo 'unset'
fi
fi
return $r;
}
# Get an option value
option_value() {
# First argument, the commandline flag (i.e. "-s").
<<< ${opts[$1]}
}
# Messaging function with pretty coloring
function _msg() {
local command="print -P"
local progname="$fg[magenta]${TOMBEXEC##*/}$reset_color"
local message="$fg_bold[normal]$fg_no_bold[normal]${2}$reset_color"
local -i returncode
case "$1" in
inline)
command+=" -n"; pchars=" > "; pcolor="yellow"
;;
message)
pchars=" . "; pcolor="white"; message="$fg_no_bold[$pcolor]${2}$reset_color"
;;
verbose)
pchars="[D]"; pcolor="blue"
;;
success)
pchars="(*)"; pcolor="green"; message="$fg_no_bold[$pcolor]${2}$reset_color"
;;
warning)
pchars="[W]"; pcolor="yellow"; message="$fg_no_bold[$pcolor]${2}$reset_color"
;;
failure)
pchars="[E]"; pcolor="red"; message="$fg_no_bold[$pcolor]${2}$reset_color"
returncode=1
;;
*)
pchars="[F]"; pcolor="red"
message="Developer oops! Usage: _msg MESSAGE_TYPE \"MESSAGE_CONTENT\""
returncode=127
;;
esac
${=command} "${progname} $fg_bold[$pcolor]$pchars$reset_color ${message}$color[reset_color]" >&2
return $returncode
}
function _message say() {
local notice="message"
[[ "$1" = "-n" ]] && shift && notice="inline"
option_is_set -q || _msg "$notice" "$1"
return 0
}
alias act="_message -n"
function _verbose xxx() {
option_is_set -D && _msg verbose "$1"
return 0
}
function _success yes() {
option_is_set -q || _msg success "$1"
return 0
}
function _warning no() {
option_is_set -q || _msg warning "$1"
return 1
}
function _failure die() {
typeset -i exitcode=${2:-1}
option_is_set -q || _msg failure "$1"
exit $exitcode
}
# Print out progress to inform GUI caller applications (--batch mode)
progress() {
# $1 is "what is progressing"
# $2 is "percentage"
# $3 is (eventually blank) status
# Example: if creating a tomb, it could be sth like
# progress create 0 filling with random data
# progress create 40 generating key
# progress keygen 0 please move the mouse
# progress keygen 30 please move the mouse
# progress keygen 60 please move the mouse
# progress keygen 100 key generated
# progress create 80 please enter password
# progress create 90 formatting the tomb
# progress create 100 tomb created successfully
if ! option_is_set --batch; then
return
fi
print "[m][P][$1][$2][$3]" >&2
}
# Check what's installed
check_bin() {
# check for required programs
for req in cryptsetup pinentry sudo gpg; do
command -v $req >/dev/null || _failure "Cannot find $req. It's a requirement to use Tomb, please install it." 1
done
export PATH=/sbin:/usr/sbin:$PATH
# which dd command to use
command -v dcfldd > /dev/null
{ test $? = 0 } && { DD="dcfldd statusinterval=1" }
# which wipe command to use
command -v wipe > /dev/null && WIPE="wipe -f -s" || WIPE="rm -f"
# check for filesystem creation progs
command -v mkfs.ext4 > /dev/null && \
MKFS="mkfs.ext4 -q -F -j -L" || \
MKFS="mkfs.ext3 -q -F -j -L"
# check for mktemp
command -v mktemp > /dev/null || MKTEMP=0
# check for steghide
command -v steghide > /dev/null || STEGHIDE=0
# check for resize
command -v e2fsck resize2fs > /dev/null || RESIZER=0
# check for KDF auxiliary tools
command -v tomb-kdb-pbkdf2 > /dev/null || KDF=0
# check for Swish-E file content indexer
command -v swish-e > /dev/null || SWISH=0
# check for QREncode for paper backups of keys
command -v qrencode > /dev/null || QRENCODE=0
}
# }}} - Commandline interaction
# {{{ Key operations
# This function retrieves a tomb key specified on commandline or from
# stdin if -k - was selected. It also runs validity checks on the
# file. Callers should always use drop_key() when done with all key
# operations. On success returns 0 and prints out the full path to
# the key.
load_key() {
# take the name of a tomb file as argument
if option_is_set -k ; then
if [[ "`option_value -k`" == "-" ]]; then
_verbose "load_key reading from stdin."
# take key from stdin
tombkeydir=`safe_dir load_key_stdin` # global used to check if key from stdin
_verbose "tempdir is $tombkeydir"
act "Waiting for the key to be piped from stdin... "
cat > ${tombkeydir}/stdin.tmp.key
print ok >&2
tombdir=${tombkeydir}
tombfile=stdin.tmp.key
tombname="stdin"
elif [[ "`option_value -k`" != "" ]]; then
_verbose "load_key argument: `option_value -k`"
# take key from a file
tombkey=`option_value -k`
tombdir=`dirname $tombkey`
tombfile=`basename $tombkey`
fi
else # no -k specified
_failure "This operation requires a key file to be specified using the -k option."
return 1
fi
tombkey=${tombdir}/${tombfile}
_verbose "load_key: ${tombkey}"
{ test -r "${tombkey}" } || {
_warning "Key not found, specify one using -k."
drop_key
return 1 }
# this does a check on the file header
if ! is_valid_key ${tombkey}; then
_warning "The key seems invalid, the application/pgp header is missing."
drop_key
return 1
fi
print "$tombkey"
return 0
}
# This function asks the user for the password to use the key it tests
# it against the return code of gpg on success returns 0 and prints
# the password (be careful about where you save it!)
ask_key_password() {
local tombkey="$1"
local keyname=`basename $tombkey`
_message "A password is required to use key ${keyname}"
local passok=0
local tombpass=""
if [ "$2" = "" ]; then
for c in 1 2 3; do
if [ $c = 1 ]; then
tombpass=`exec_as_user ${TOMBEXEC} askpass "Insert password to use key: $keyname"`
else
tombpass=`exec_as_user ${TOMBEXEC} askpass "Insert password to use key: $keyname (retry $c)"`
fi
if [[ $? != 0 ]]; then
_warning "User aborted password dialog."
return 1
fi
get_lukskey "$tombpass" "$tombkey" >/dev/null
if [ $? = 0 ]; then
passok=1; _message "Password OK."
break;
fi
done
else
# if a second argument is present then the password is already known
tombpass="$2"
_verbose "ask_key_password with tombpass: $tombpass"
get_lukskey "$tombpass" "$tombkey" >/dev/null
if [ $? = 0 ]; then
passok=1; _message "Password OK."; fi
fi
{ test "$passok" = "1" } || { return 1 }
print "$tombpass"
unset tombpass
return 0
}
# change tomb key password
change_passwd() {
_message "Commanded to change password for tomb key $1"
_check_swap
keyfile="`load_key`"
local tmpnewkey lukskey c tombpass tombpasstmp
tmpnewkey=`safe_filename passnew`
lukskey=`safe_filename passold`
_success "Changing password for $keyfile"
if option_is_set --tomb-old-pwd; then
tomb_old_pwd="`option_value --tomb-old-pwd`"
_verbose "--tomb-old-pwd = $tomb_old_pwd"
tombpass=`ask_key_password "$keyfile" "$tomb_old_pwd"`
else
tombpass=`ask_key_password "$keyfile"`
fi
{ test $? = 0 } || {
_failure "No valid password supplied." }
# danger zone in which the key is written in clear
get_lukskey "$tombpass" "$keyfile" > "$lukskey"
drop_key
if option_is_set --tomb-pwd; then
tomb_new_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_new_pwd"
gen_key "$lukskey" "$tomb_new_pwd" > "$tmpnewkey"
else
gen_key "$lukskey" > "$tmpnewkey"
fi
${=WIPE} "$lukskey"
if ! is_valid_key "$tmpnewkey"; then
_failure "Error: the newly generated keyfile does not seem valid."
else
# copy the new key as the original keyfile name
cp -f "${tmpnewkey}" "${keyfile}"
_success "Your passphrase was successfully updated."
fi
_verbose "Cleanup: $tmpnewkey"
${=WIPE} "${tmpnewkey}"
}
# To be called after load_key()
drop_key() {
_verbose "drop_key $tombkey"
# delete key if temp stored from stdin
if [[ "$tombkey" =~ "/dev/shm/tomb.load_key_stdin" ]]; then
{ test -r ${tombkey} } && {
_message "Removing key temporarily stored from stdin"
${=WIPE} ${tombkey}; rmdir `dirname ${tombkey}` }
fi
}
#$1 is the keyfile we are checking
is_valid_key() {
_verbose "is_valid_key $1"
# argument check
{ test "$1" = "" } && {
_warning "Key file is missing from arguments."; return 1 }
# file checks
{ test -r "$1" } || {
_warning "Key file not found: $1"; return 1 }
{ test -f "$1" } || {
_warning "Key file is not a regular file: $1"; return 1 }
# this header validity check is a virtuosism by Hellekin
[[ `file =(awk '/^-+BEGIN/,0' $1)` =~ PGP ]] && {
if [ "$tombkeydir" = "" ]; then _message "Valid key file found: $1"
else _message "Valid key file passed from stdin"; fi
return 0 }
# if no BEGIN header found then we try to recover it
[[ `file $1 -bi` =~ text/plain ]] && {
_warning "Key data found with missing headers, attempting recovery."
local tmp_keyfix=`safe_filename keyfix`
touch $tmp_keyfix
# make sure KDF header comes first
local header=`grep '^_KDF_' $1`
print "$header" >> $tmp_keyfix
cat $1 | awk '
BEGIN {
print "-----BEGIN PGP MESSAGE-----"
print
}
/^_KDF_/ { next }
{ print $0 }
END {
print "-----END PGP MESSAGE-----"
}' >> ${tmp_keyfix}
mv $tmp_keyfix $1
chown ${_uid}:${_gid} ${1}
chmod 0600 ${1}
return 0
}
_warning "Invalid key format: $1"
return 1
}
# Gets a key file and a password, prints out the decoded contents to
# be used directly by Luks as a cryptographic key
get_lukskey() {
# $1 is the password, $2 is the keyfile
local tombpass=$1
local keyfile=$2
firstline=`head -n1 $keyfile`
_verbose "get_lukskey XXX $keyfile"
if [[ $firstline =~ '^_KDF_' ]]; then
_verbose "KDF: `cut -d_ -f 3 <<<$firstline`"
case `cut -d_ -f 3 <<<$firstline` in
pbkdf2sha1)
pbkdf2_param=`cut -d_ -f 4- <<<$firstline | tr '_' ' '`
tombpass=$(tomb-kdb-pbkdf2 ${=pbkdf2_param} 2> /dev/null <<<$tombpass)
;;
*)
_failure "No suitable program for KDF `cut -f 3 <<<$firstline`."
unset tombpass
return 1
;;
esac
fi
# fix for gpg 1.4.11 where the --status-* options don't work ;^/
gpgver=`gpg --version | awk '/^gpg/ {print $3}'`
if [ "$gpgver" = "1.4.11" ]; then
_verbose "GnuPG is version 1.4.11 - adopting status fix."
print ${tombpass} | \
gpg --batch --passphrase-fd 0 --no-tty --no-options -d "${keyfile}"
ret=$?
unset tombpass
else # using status-file in gpg != 1.4.11
res=`safe_filename lukskey`
{ test $? = 0 } || { unset tombpass; _failure "Fatal error creating temp file." }
print ${tombpass} | \
gpg --batch --passphrase-fd 0 --no-tty --no-options --status-fd 2 \
--no-mdc-warning --no-permission-warning --no-secmem-warning \
-d "${keyfile}" 2> $res
unset tombpass
grep 'DECRYPTION_OKAY' $res > /dev/null
ret=$?; rm -f $res
fi
_verbose "get_lukskey returns $ret"
return $ret
}
# takes care to encrypt a key
# honored options: --kdf --tomb-pwd
gen_key() {
# $1 the lukskey to encrypt
# $2 is the --cipher-algo to use (string taken by GnuPG)
local lukskey="$1"
local algopt="`option_value -o`"
local algo="${algopt:-AES256}"
# here user is prompted for key password
local tombpass=""
local tombpasstmp=""
local tombpassarg="$2"
if [ "$tombpassarg" = "" ]; then
while true; do
# 3 tries to write two times a matching password
tombpass=`exec_as_user ${TOMBEXEC} askpass "Type the new password to secure your key"`
if [[ $? != 0 ]]; then
_failure "User aborted."
fi
if [ -z $tombpass ]; then
_warning "You set empty password, which is not possible."
continue
fi
tombpasstmp=$tombpass
tombpass=`exec_as_user ${TOMBEXEC} askpass "Type the new password to secure your key (again)"`
if [[ $? != 0 ]]; then
_failure "User aborted."
fi
if [ "$tombpasstmp" = "$tombpass" ]; then
break;
fi
unset tombpasstmp
unset tombpass
done
else
tombpass="$tombpassarg"
_verbose "gen_key takes tombpass from CLI argument: $tombpass"
fi
header=""
{ test "$KDF" = 1 } && {
{ option_is_set --kdf } && {
# KDF is a new key strenghtening technique against brute forcing
# see: https://github.com/dyne/Tomb/issues/82
itertime="`option_value --kdf`"
# removing support of floating points because they can't be type checked well
if [[ "$itertime" != <-> ]]; then
unset tombpass
unset tombpasstmp
_failure "Wrong argument for --kdf: must be an integer number (iteration seconds)."
fi
# --kdf takes one parameter: iter time (on present machine) in seconds
local -i microseconds
microseconds=$((itertime*10000))
_success "Using KDF, iterations: $microseconds"
pbkdf2_salt=`tomb-kdb-pbkdf2-gensalt`
pbkdf2_iter=`tomb-kdb-pbkdf2-getiter $microseconds`
# We use a length of 64bytes = 512bits (more than needed!?)
tombpass=`tomb-kdb-pbkdf2 $pbkdf2_salt $pbkdf2_iter 64 <<<"${tombpass}"`
header="_KDF_pbkdf2sha1_${pbkdf2_salt}_${pbkdf2_iter}_64\n"
}
}
print -n $header
print "${tombpass}" \
| gpg --openpgp --force-mdc --cipher-algo ${algo} \
--batch --no-options --no-tty --passphrase-fd 0 --status-fd 2 \
-o - -c -a ${lukskey}
unset tombpass
unset tombpasstmp
}
# prints an array of ciphers available in gnupg (to encrypt keys)
list_gnupg_ciphers() {
# prints an error if GnuPG is not found
which gpg > /dev/null || _failure "gpg (GnuPG) is not found, Tomb cannot function without it."
ciphers=(`gpg --version | awk '
BEGIN { ciphers=0 }
/^Cipher:/ { gsub(/,/,""); sub(/^Cipher:/,""); print; ciphers=1; next }
/^Hash:/ { ciphers=0 }
{ if(ciphers==0) { next } else { gsub(/,/,""); print; } }
'`)
echo " ${ciphers}"
return 1
}
# Steganographic function to bury a key inside an image.
# Requires steghide(1) to be installed
bury_key() {
tombkey="`load_key`"
{ test "$tombkey" = "" } && {
_failure "Bury failed: invalid key $tombkey" }
imagefile=$1
file $imagefile | grep -i JPEG > /dev/null
if [ $? != 0 ]; then
_warning "Encode failed: $imagefile is not a jpeg image."
return 1
fi
_success "Encoding key $tombkey inside image $imagefile"
_message "Please confirm the key password for the encoding"
if option_is_set --tomb-pwd; then
tomb_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_pwd"
tombpass=`ask_key_password "$tombkey" "$tomb_pwd"`
else
tombpass=`ask_key_password "$tombkey"`
fi
{ test $? = 0 } || {
drop_key
_warning "Wrong password supplied."
_failure "You shall not bury a key whose password is unknown to you."
}
# we omit armor strings since having them as constants can give
# ground to effective attacks on steganography
awk '
/^-----/ {next}
/^Version/ {next}
{print $0}' ${tombkey} \
| steghide embed --embedfile - --coverfile ${imagefile} \
-p ${tombpass} -z 9 -e serpent cbc
if [ $? != 0 ]; then
_warning "Encoding error: steghide reports problems."
res=1
else
_success "Tomb key encoded succesfully into image ${imagefile}"
res=0
fi
unset tombpass
drop_key
return $res
}
exhume_key() {
tombkey="`option_value -k`"
{ test "$tombkey" = "" } && {
tombkey="-"
_message "printing exhumed key on stdout"
}
imagefile="$1"
res=1
file $imagefile | grep -i JPEG > /dev/null
if [ $? != 0 ]; then
_failure "Encode failed: $imagefile is not a jpeg image."
fi
{ test "$tombkey" = "-" } || {
if [[ -e "$tombkey" ]]; then
_warning "File exists: $tombkey"
{ option_is_set -f } || {
_warning "Make explicit use of --force to overwrite."
_failure "Refusing to overwrite file. Operation aborted." }
_warning "Use of --force selected: overwriting."
rm -f ${tombkey}
fi
}
_message "Trying to exhume a key out of image $imagefile"
if option_is_set --tomb-pwd; then
tombpass="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tombpass"
else
tombpass=`exec_as_user ${TOMBEXEC} askpass "Insert password to exhume key from $imagefile"`
if [[ $? != 0 ]]; then
_warning "User aborted password dialog."
return 1
fi
fi
# always steghide required
steghide extract -sf ${imagefile} -p ${tombpass} -xf ${tombkey}
res=$?
unset tombpass
if [ $res = 0 ]; then
_success "${tombkey} succesfully decoded."
else
_warning "Nothing found in $imagefile"
fi
return $res
}
# Produces a printable image of the key contents so that it can be
# backuped on paper and hidden in books etc.
engrave_key() {
# load key from options
tombkey="`load_key`"
{ test $? = 0 } || { _failure "No key specified." }
keyname=`basename $tombkey`
pngname="$keyname.qr.png"
_success "Rendering a printable QRCode for key: $tombkey"
# we omit armor strings to save space
awk '
/^-----/ {next}
/^Version/ {next}
{print $0}' ${tombkey} | qrencode --size 4 --level H \
--casesensitive -o "$pngname"
{ test $? = 0 } || { _failure "QREncode reported an error." }
_success "Operation successful:"
_message "`ls -lh $pngname`"
_message "`file $pngname`"
drop_key
}
# }}} - Key handling
# {{{ Create
# This is a new way to create tombs which dissects the whole create_tomb() into 3 clear steps:
#
# * dig a .tomb (the large file) using /dev/urandom (takes some minutes at least)
#
# * forge a .key (the small file) using /dev/random (good entropy needed)
#
# * lock the .tomb file with the key, binding the key to the tomb (requires dm_crypt format)
forge_key() {
# can be specified both as simple argument or using -k
local destkey="$1"
{ option_is_set -k } && { destkey="`option_value -k`" }
{ test "$destkey" = "" } && {
_warning "A filename needs to be specified using -k to forge a new key."
return 1 }
_message "Commanded to forge key $destkey"
_check_swap
# make sure that gnupg doesn't quits with an error before first run
{ test -r $HOME/.gnupg/pubring.gpg } || {
mkdir $HOME/.gnupg
touch $HOME/.gnupg/pubring.gpg }
{ test -r "$destkey" } && {
_warning "Forging this key would overwrite an existing file. Operation aborted."
_failure "`ls -lh $destkey`" }
# create the keyfile in tmpfs so that we leave less traces in RAM
local keytmp=`safe_dir forge`
(( $? )) && _failure "Error creating temp dir."
_verbose "safe_dir at $keytmp"
mount tmpfs "${keytmp}" -t tmpfs -o size=1m
if [ $? != 0 ]; then
_warning "Cannot mount tmpfs filesystem in volatile memory."
rm -r "${keytmp}"
_failure "Operation aborted."
fi
local algo
{ option_is_set -o } && { algopt="`option_value -o`" }
algo=${algopt:-AES256}
_message "Commanded to forge key $destkey with cipher algorithm $algo"
local tombkey="$destkey"
_message "This operation takes time, keep using this computer on other tasks,"
_message "once done you will be asked to choose a password for your tomb."
_message "To make it faster you can move the mouse around."
_message "If you are on a server, you can use an Entropy Generation Daemon."
touch ${keytmp}/tomb.tmp
chmod 0600 ${keytmp}/tomb.tmp
local random_source=/dev/random
if option_is_set --use-urandom; then
random_source=/dev/urandom
fi
_verbose "Data dump using ${DD[1]} from $random_source"
${=DD} bs=1 count=256 if=$random_source of=${keytmp}/tomb.tmp
if ! [ -r ${keytmp}/tomb.tmp ]; then
_warning "Cannot generate encryption key."
umount ${keytmp}
rm -r $keytmp
_failure "Operation aborted."
fi
_success "Choose the password of your key: ${tombkey}"
_message "(You can also change it later using 'tomb passwd'.)"
touch ${tombkey}
chown ${_uid}:${_gid} ${tombkey}
chmod 0600 ${tombkey}
tombname="$tombkey"
# the gen_key() function takes care of the new key's encryption
if option_is_set --tomb-pwd; then
tomb_new_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_new_pwd"
gen_key "${keytmp}/tomb.tmp" "$tomb_new_pwd" > "$tombkey"
else
gen_key "${keytmp}/tomb.tmp" > "$tombkey"
fi
# this does a check on the file header
if ! is_valid_key ${tombkey}; then
_warning "The key does not seem to be valid."
_warning "Dumping contents to screen:"
cat ${tombkey}
_warning "--"
umount ${keytmp}
rm -r $keytmp
_failure "Operation aborted."
fi
${=WIPE} ${keytmp}/tomb.tmp # no need really, but anyway
umount ${keytmp}
rm -r ${keytmp}
chown ${_uid}:${_gid} ${tombkey}
_message "Done forging $tombkey"
_success "Your key is ready:"
ls -lh ${tombkey}
}
# Dig a tomb, means that it will create an empty file to be formatted
# as a loopback filesystem. Initially the file is filled with random data
# taken from /dev/urandom which improves the tomb's overall security
dig_tomb() {
_message "Commanded to dig tomb $1"
if [ "$1" = "" ]; then
_warning "No tomb name specified for creation."
return 1
fi
_check_swap
tombfile=`basename $1`
tombdir=`dirname $1`
# make sure the file has a .tomb extension
tombname=${tombfile%%\.*}
tombfile=${tombname}.tomb
# require the specification of the size of the tomb (-s) in MB
tombsize="`option_value -s`"
[ $tombsize ] || _failure "Size argument missing, use -s"
[[ $tombsize != <-> ]] && _failure "Size argument is not an integer."
[[ $tombsize -lt 10 ]] && _failure "Tombs can't be smaller than 10 megabytes."
if [ -e ${tombdir}/${tombfile} ]; then
_warning "A tomb exists already. I'm not digging here:"
_warning " `ls -lh ${tombdir}/${tombfile}`"
return 1
fi
_success "Creating a new tomb in ${tombdir}/${tombfile}"
_message "Generating ${tombfile} of ${tombsize}MiB"
# we will first touch the file and set permissions: this way, even if interrupted, permissions are right
touch ${tombdir}/${tombfile}
chmod 0600 "${tombdir}/${tombfile}"
chown $_uid:$_gid "${tombdir}/${tombfile}"
_verbose "Data dump using ${DD[1]} from /dev/urandom"
${=DD} if=/dev/urandom bs=1048576 count=${tombsize} of=${tombdir}/${tombfile}
if [ $? = 0 -a -e ${tombdir}/${tombfile} ]; then
_message " `ls -lh ${tombdir}/${tombfile}`"
else
_failure "Error creating the tomb ${tombdir}/${tombfile}, operation aborted."
fi
_success "Done digging $tombname"
_message "Your tomb is not yet ready, you need to forge a key and lock it:"
_message "tomb forge ${tombname}.tomb.key"
_message "tomb lock ${tombname}.tomb -k ${tombname}.tomb.key"
}
# this function locks a tomb with a key file
# in fact LUKS formatting the loopback volume
# it take arguments as the LUKS cipher to be used
lock_tomb_with_key() {
if ! [ $1 ]; then
_warning "No tomb specified for locking."
_warning "Usage: tomb lock file.tomb file.tomb.key"
return 1
fi
tombpath="$1"
_message "Commanded to lock tomb ${tombfile}"
tombdir=`dirname "$tombpath"`
tombfile=`basename "$tombpath"`
tombname="${tombfile%%\.*}"
{ test -f ${tombdir}/${tombfile} } || {
_failure "There is no tomb here. You have to it dig first."
return 1 }
_verbose "Tomb found: ${tombdir}/${tombfile}"
nstloop=`losetup -f` # get the number for next loopback device
losetup -f ${tombdir}/${tombfile} # allocates the next loopback for our file
_verbose "Loop mounted on ${nstloop}"
_message "Checking if the tomb is empty (we never step on somebody else's bones)."
cryptsetup isLuks ${nstloop}
if [ $? = 0 ]; then
# is it a LUKS encrypted nest? then bail out and avoid reformatting it
_warning "The tomb was already locked with another key."
losetup -d ${nstloop}
_failure "Operation aborted. I cannot lock an already locked tomb. Go dig a new one."
else
_message "Fine, this tomb seems empty."
fi
# load key from options or file
tombkey=`load_key`
{ test $? = 0 } || {
losetup -d $nstloop
_failure "Aborting operations: error loading key." }
# make sure to call drop_key later
# the encryption cipher for a tomb can be set when locking using -o
if option_is_set -o; then
cipher="`option_value -o`"
else
cipher="aes-xts-plain64:sha256"
# old default was aes-cbc-essiv:sha256
# for more alternatives refer to cryptsetup(8)
fi
_message "Locking using cipher: $cipher"
# get the pass from the user and check it
if option_is_set --tomb-pwd; then
tomb_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_pwd"
tombpass=`ask_key_password "$tombkey" "$tomb_pwd"`
else
tombpass=`ask_key_password "$tombkey"`
fi
{ test $? = 0 } || {
losetup -d ${nstloop}
_failure "No valid password supplied." }
_success "Locking ${tombfile} with ${tombkey}"
_message "Formatting Luks mapped device."
get_lukskey "${tombpass}" ${tombkey} | \
cryptsetup --key-file - --batch-mode \
--cipher ${cipher} --key-size 256 --key-slot 0 \
luksFormat ${nstloop}
if ! [ $? = 0 ]; then
_warning "cryptsetup luksFormat returned an error."
unset tombpass
losetup -d $nstloop
_failure "Operation aborted."
fi
get_lukskey "${tombpass}" ${tombkey} | \
cryptsetup --key-file - \
--cipher ${cipher} luksOpen ${nstloop} tomb.tmp
if ! [ $? = 0 ]; then
_warning "cryptsetup luksOpen returned an error."
unset tombpass
losetup -d $nstloop
_failure "Operation aborted."
fi
# cleanup tombs
unset tombpass
drop_key # make sure all temp files are out
_message "Formatting your Tomb with Ext3/Ext4 filesystem."
${=MKFS} ${tombname} /dev/mapper/tomb.tmp
if [ $? != 0 ]; then
_warning "Tomb format returned an error."
_warning "Your tomb ${tombfile} may be corrupted."
fi
sync
cryptsetup luksClose tomb.tmp
losetup -d ${nstloop}
_message "Done locking $tombname using Luks dm-crypt ${create_cipher}"
_success "Your tomb is ready in ${tombdir}/${tombfile} and secured with key ${tombkey}"
}
# This function changes the key that locks a tomb
change_tomb_key() {
_message "Commanded to reset key for tomb $2"
_check_swap
newkey="`load_key`"
{ test $? = 0 } || {
_failure "Aborting operations: error loading new key from -k" }
oldkey="$1"
{ is_valid_key "$oldkey" } || {
_failure "Old key invalid. 1st argument of setkey must be a valid key file." }
{ is_valid_tomb "$2" } || {
_failure "Tomb invalid. 2nd argument of setkey must be a valid tomb file." }
nstloop=`losetup -f`
{ test $? = 255 } && {
_failure "Too many tombs are open. Please close any of them to proceed." }
losetup -f "$2"
cryptsetup isLuks ${nstloop}
# is it a LUKS encrypted nest? we check one more timesee cryptsetup(1)
{ test $? = 0 } || {
losetup -d "$nstloop"
_failure "Not a valid LUKS encrypted volume: $2" }
# we have everything, prepare to mount
_success "Changing lock on tomb $tombname"
_message "Old key: $oldkey"
_message "New key: $newkey"
# render the mapper
mapdate=`date +%s`
# save date of mount in minutes since 1970
mapper="tomb.${tombname}.${mapdate}.`basename $nstloop`"
if option_is_set --tomb-pwd; then
tomb_new_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_new_pwd"
newkeypass=`ask_key_password "$newkey" "$tomb_new_pwd"`
else
newkeypass=`ask_key_password "$newkey"`
fi
{ test $? = 0 } || {
_failure "No valid password supplied for the new key." }
newkeyfile="`safe_filename newkey`"
get_lukskey "$newkeypass" "$newkey" > $newkeyfile
# load the old key
if option_is_set --tomb-old-pwd; then
tomb_old_pwd="`option_value --tomb-old-pwd`"
_verbose "--tomb-old-pwd = $tomb_old_pwd"
oldkeypass=`ask_key_password "$oldkey" "$tomb_old_pwd"`
else
oldkeypass=`ask_key_password "$oldkey"`
fi
{ test $? = 0 } || {
_failure "No valid password supplied for the old key." }
# luksOpen the tomb (not really mounting, just on the loopback)
get_lukskey "$oldkeypass" "$oldkey" | \
cryptsetup --key-file - luksOpen ${nstloop} ${mapper}
{ test $? = 0 } || {
losetup -d "$nstloop"
_failure "Unexpected error in luksOpen." }
get_lukskey "$oldkeypass" "$oldkey" | \
cryptsetup --key-file - luksChangeKey "$nstloop" "$newkeyfile"
{ test $? = 0 } || {
losetup -d "$nstloop"
_failure "Unexpected error in luksChangeKey." }
${=WIPE} "$newkeyfile"
cryptsetup luksClose "${mapper}"
{ test $? = 0 } || {
losetup -d "$nstloop"
_failure "Unexpected error in luksClose." }
drop_key
unset oldkeypass
unset newkeypass
losetup -d ${nstloop}
_success "Succesfully changed key for tomb: $2"
_message "The new key is: $newkey"
return 0
}
# backward compatibility
create_tomb() {
_verbose "create_tomb(): ${=@} ${=OLDARGS}"
if ! [ $1 ]; then
_warning "No tomb name specified for creation."
return 1
fi
{ test -r "$1" } && {
_warning "Creating this tomb would overwrite an existing file. Operation aborted."
_failure "`ls -lh $1`" }
{ test $? = 0 } || { _failure "Failed to dig tomb, operation aborted." }
tombfile=`basename $1`
tombdir=`dirname $1`
# make sure the file has a .tomb extension
tombname=${tombfile%%\.*}
tombfile=${tombname}.tomb
${TOMBEXEC} dig ${=PARAM}
${TOMBEXEC} forge ${tombdir}/${tombfile}.key
{ test $? = 0 } || { _failure "Failed to forge key, operation aborted." }
${TOMBEXEC} lock ${tombdir}/${tombfile} -k ${tombdir}/${tombfile}.key
{ test $? = 0 } || { _failure "Failed to lock tomb with key, operation aborted." }
_success "Tomb $tombname succesfully created."
ls -l ${tombfile}*
}
# }}} - Creation
# {{{ Open
# $1 = tombfile $2(optional) = mountpoint
mount_tomb() {
_message "Commanded to open tomb $1"
if [ "$1" = "" ]; then
_warning "No tomb name specified for creation."
return 1
fi
_check_swap
# set up variables to be used
# the full path is made with $tombdir/$tombfile
local tombkey
local tombfile
local tombdir
local tombname
tombfile=`basename ${1}`
tombdir=`dirname ${1}`
# check file type (if its a Luks fs)
file ${tombdir}/${tombfile} | grep -i 'luks encrypted file' 2>&1 >/dev/null
if [ $? != 0 ]; then
_warning "$1 is not a valid tomb file, operation aborted."
return 1
fi
tombname=${tombfile%%\.*}
_verbose "Tomb found: ${tombdir}/${tombfile}"
# load_key called here
tombkey=`load_key ${tombdir}/${tombfile}`
{ test $? = 0 } || {
_failure "Aborting operations: error loading key $tombkey" }
if [ "$2" = "" ]; then
tombmount=/media/${tombfile}
_message "Mountpoint not specified, using default: $tombmount"
else
tombmount=$2
fi
# check if its already open
mount -l | grep "${tombfile}.*\[$tombname\]$" 2>&1 > /dev/null
if [ $? = 0 ]; then
_warning "$tombname is already open."
_message "Here below its status is reported:"
list_tombs ${tombname}
return 0
fi
_success "Opening $tombfile on $tombmount"
nstloop=`losetup -f`
if [ $? = 255 ]; then
_failure "Too many tombs open. Please close any of them to open another tomb."
fi
_verbose "Next free loop device: $nstloop"
losetup -f ${tombdir}/${tombfile}
cryptsetup isLuks ${nstloop}
if [ $? != 0 ]; then
# is it a LUKS encrypted nest? see cryptsetup(1)
_warning "$tombfile is not a valid Luks encrypted storage file."
losetup -d ${nstloop}
return 1
fi
_message "This tomb is a valid LUKS encrypted device."
luksdump="`cryptsetup luksDump ${nstloop}`"
tombdump=(`print $luksdump | awk '
/^Cipher name/ {print $3}
/^Cipher mode/ {print $3}
/^Hash spec/ {print $3}'`)
_message "Cipher is \"$tombdump[1]\" mode \"$tombdump[2]\" hash \"$tombdump[3]\""
slotwarn=`print $luksdump | awk '
BEGIN { zero=0 }
/^Key slot 0/ { zero=1 }
/^Key slot.*ENABLED/ { if(zero==1) print "WARN" }'`
{ test "$slotwarn" = "WARN" } && {
_warning "Multiple key slots are enabled on this tomb. Beware: there can be a backdoor." }
# save date of mount in minutes since 1970
mapdate=`date +%s`
mapper="tomb.${tombname}.${mapdate}.`basename $nstloop`"
_verbose "dev mapper device: $mapper"
_verbose "Tomb key: $tombkey"
keyname=`basename $tombkey | cut -d. -f1`
if option_is_set --tomb-pwd; then
tomb_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_pwd"
tombpass=`ask_key_password "$tombkey" "$tomb_pwd"`
else
tombpass=`ask_key_password "$tombkey"`
fi
{ test $? = 0 } || {
losetup -d ${nstloop}
_failure "No valid password supplied." }
get_lukskey "${tombpass}" ${tombkey} | \
cryptsetup --key-file - luksOpen ${nstloop} ${mapper}
# key dropped here
drop_key
unset tombpass
if ! [ -r /dev/mapper/${mapper} ]; then
losetup -d ${nstloop}
_failure "Failure mounting the encrypted file."
fi
# array: [ cipher, keysize, loopdevice ]
tombstat=(`cryptsetup status ${mapper} | awk '
/cipher:/ {print $2}
/keysize:/ {print $2}
/device:/ {print $2}'`)
_success "Success unlocking tomb $tombname"
_verbose "Key size is $tombstat[2] for cipher $tombstat[1]"
_message "Checking filesystem via $tombstat[3]"
fsck -p -C0 /dev/mapper/${mapper}
_verbose "Tomb engraved as $tombname"
tune2fs -L ${tombname} /dev/mapper/${mapper} > /dev/null
# we need root from here on
mkdir -p $tombmount
mount -o $MOUNTOPTS /dev/mapper/${mapper} ${tombmount}
chown ${_uid}:${_gid} ${tombmount}
chmod 0711 ${tombmount}
_success "Success opening $tombfile on $fg_bold[white]$tombmount$fg_no_bold[white]"
# print out when was opened the last time, by whom and where
{ test -r ${tombmount}/.last } && {
tombtty="`cat ${tombmount}/.tty`"
tombhost="`cat ${tombmount}/.host`"
tombuid="`cat ${tombmount}/.uid`"
tomblast="`cat ${tombmount}/.last`"
tombuser=`awk -F: '/:'"$tombuid"':/ {print $1}' /etc/passwd`
_message "Last visit by $fg_bold[white]$tombuser($tombuid)$fg_no_bold[white] from $fg_bold[white]$tombtty$fg_no_bold[white] on $fg_bold[white]$tombhost$fg_no_bold[white]"
_message "on date $fg_bold[white]`date --date @${tomblast} +%c`$fg_no_bold[white]"
}
# write down the UID and TTY that opened the tomb
rm -f ${tombmount}/.uid
echo ${_uid} > ${tombmount}/.uid
rm -f ${tombmount}/.tty
echo ${_tty} > ${tombmount}/.tty
# also the hostname
rm -f ${tombmount}/.host
echo `hostname` > ${tombmount}/.host
# and the "last time opened" information
# in minutes since 1970, this is printed at next open
rm -f ${tombmount}/.last
echo "`date +%s`" > ${tombmount}/.last
# human readable: date --date=@"`cat .last`" +%c
# process bind-hooks (mount -o bind of directories)
# and post-hooks (execute on open)
if ! option_is_set -n ; then
exec_safe_bind_hooks ${tombmount}
exec_safe_post_hooks ${tombmount} open
fi
return 0
}
# ## Hooks execution
exec_safe_bind_hooks() {
if [[ -n ${(k)opts[-o]} ]]; then
MOUNTOPTS=${opts[-o]}
fi
local MOUNTPOINT="${1}"
local ME=${SUDO_USER:-$(whoami)}
local HOME=$(awk -v a="$ME" -F ':' '{if ($1 == a) print $6}' /etc/passwd 2>/dev/null)
if [ $? -ne 0 ]; then
_warning "How pitiful! A tomb, and no HOME."
return 1
fi
if [ -z "$MOUNTPOINT" -o ! -d "$MOUNTPOINT" ]; then
_warning "Cannot exec bind hooks without a mounted tomb."
return 1
fi
if ! [ -r "$MOUNTPOINT/bind-hooks" ]; then
_verbose "bind-hooks not found in $MOUNTPOINT"
return 1
fi
typeset -al mounted
typeset -Al maps
maps=($(<"$MOUNTPOINT/bind-hooks"))
for dir in ${(k)maps}; do
if [ "${dir[1]}" = "/" -o "${dir[1,2]}" = ".." ]; then
_warning "bind-hooks map format: local/to/tomb local/to/\$HOME"
continue
fi
if [ "${${maps[$dir]}[1]}" = "/" -o "${${maps[$dir]}[1,2]}" = ".." ]; then
_warning "bind-hooks map format: local/to/tomb local/to/\$HOME. Rolling back"
for dir in ${mounted}; do umount $dir; done
return 1
fi
if [ ! -r "$HOME/${maps[$dir]}" ]; then
_warning "bind-hook target not existent, skipping $HOME/${maps[$dir]}"
elif [ ! -r "$MOUNTPOINT/$dir" ]; then
_warning "bind-hook source not found in tomb, skipping ${MOUNTPOINT}/${dir}"
else
mount -o bind,$MOUNTOPTS $MOUNTPOINT/$dir $HOME/${maps[$dir]}
mounted+=("$HOME/${maps[$dir]}")
fi
done
}
# Post mount hooks
exec_safe_post_hooks() {
local mnt=$1 # first argument is where the tomb is mounted
local ME=${SUDO_USER:-$(whoami)}
if ! [ -x ${mnt}/post-hooks ]; then return; fi
# if 'post-hooks' is found inside the tomb, check it: if it is an
# executable, launch it as a user this might need a dialog for
# security on what is being run, however we expect you know well
# what is inside your tomb. this feature opens the possibility to
# make encrypted executables.
cat ${mnt}/post-hooks | head -n1 | grep '^#!/'
if [ $? = 0 ]; then
_success "Post hooks found, executing as user $SUDO_USER."
exec_as_user ${mnt}/post-hooks "$2" "$1"
fi
}
# }}} - Tomb open
# {{{ List
# list all tombs mounted in a readable format
# $1 is optional, to specify a tomb
list_tombs() {
# list all open tombs
mounted_tombs=(`list_tomb_mounts $1`)
{ test ${#mounted_tombs} = 0 } && {
_failure "I can't see any ${1:-open} tomb, may they all rest in peace." }
for t in ${mounted_tombs}; do
mapper=`basename ${t[(ws:;:)1]}`
tombname=${t[(ws:;:)5]}
tombmount=${t[(ws:;:)2]}
tombfs=${t[(ws:;:)3]}
tombfsopts=${t[(ws:;:)4]}
tombloop=${mapper[(ws:.:)4]}
# calculate tomb size
ts=`df -hP /dev/mapper/$mapper |
awk "/mapper/"' { print $2 ";" $3 ";" $4 ";" $5 }'`
tombtot=${ts[(ws:;:)1]}
tombused=${ts[(ws:;:)2]}
tombavail=${ts[(ws:;:)3]}
tombpercent=${ts[(ws:;:)4]}
tombp=${tombpercent%%%}
tombsince=`date --date=@${mapper[(ws:.:)3]} +%c`
# find out who opens it from where
{ test -r ${tombmount}/.tty } && {
tombtty="`cat ${tombmount}/.tty`"
tombhost="`cat ${tombmount}/.host`"
tombuid="`cat ${tombmount}/.uid`"
tombuser=`awk -F: '/:'"$tombuid"':/ {print $1}' /etc/passwd`
}
if option_is_set --get-mountpoint; then
echo $tombmount
continue
fi
# breaking up such strings is good for translation
print -n "$fg[green]$tombname"
print -n "$fg[white] open on "
print -n "$fg_bold[white]$tombmount"
print -n "$fg_no_bold[white] using "
print "$fg_bold[white]$tombfs $tombfsopts"
print -n "$fg_no_bold[green]$tombname"
print -n "$fg_no_bold[white] open since "
print "$fg_bold[white]$tombsince$fg_no_bold[white]"
{ test "$tombtty" = "" } || {
print -n "$fg_no_bold[green]$tombname"
print -n "$fg_no_bold[white] open by "
print -n "$fg_bold[white]$tombuser"
print -n "$fg_no_bold[white] from "
print -n "$fg_bold[white]$tombtty"
print -n "$fg_no_bold[white] on "
print "$fg_bold[white]$tombhost"
}
print -n "$fg_no_bold[green]$tombname"
print -n "$fg[white] size "
print -n "$fg_bold[white]$tombtot"
print -n "$fg_no_bold[white] of which "
print -n "$fg_bold[white]$tombused"
print -n "$fg_no_bold[white] used: "
print -n "$fg_bold[white]$tombavail"
print -n "$fg_no_bold[white] free ("
print -n "$fg_bold[white]$tombpercent"
print "$fg_no_bold[white] full)"
if [[ ${tombp} -ge 90 ]]; then
print -n "$fg_no_bold[green]$tombname"
print "$fg_bold[red] Your tomb is almost full!"
fi
# now check hooks
mounted_hooks=(`list_tomb_binds $tombname`)
for h in ${mounted_hooks}; do
print -n "$fg_no_bold[green]$tombname"
print -n "$fg_no_bold[white] hooks "
# print -n "$fg_bold[white]`basename ${h[(ws:;:)1]}`"
# print -n "$fg_no_bold[white] on "
print "$fg_bold[white]${h[(ws:;:)2]}$fg_no_bold[white]"
done
done
}
# print out an array of mounted tombs (internal use)
# format is semi-colon separated list of attributes
# if 1st arg is supplied, then list only that tomb
#
# String positions in the semicolon separated array:
#
# 1. full mapper path
#
# 2. mountpoint
#
# 3. filesystem type
#
# 4. mount options
#
# 5. tomb name
list_tomb_mounts() {
if [ "$1" = "" ]; then
# list all open tombs
mount -l \
| awk '
BEGIN { main="" }
/^\/dev\/mapper\/tomb/ {
if(main==$1) next;
print $1 ";" $3 ";" $5 ";" $6 ";" $7
main=$1
}
'
else
# list a specific tomb
mount -l \
| awk -vtomb="[$1]" '
BEGIN { main="" }
/^\/dev\/mapper\/tomb/ {
if($7!=tomb) next;
if(main==$1) next;
print $1 ";" $3 ";" $5 ";" $6 ";" $7
main=$1
}
'
fi
}
# list_tomb_binds
# print out an array of mounted bind hooks (internal use)
# format is semi-colon separated list of attributes
# needs an argument: name of tomb whose hooks belong
list_tomb_binds() {
if [ "$1" = "" ]; then
_failure "Internal error: list_tomb_binds called without argument."; fi
# list bind hooks on util-linux 2.20 (Debian 7)
mount -l \
| awk -vtomb="$1" '
BEGIN { main="" }
/^\/dev\/mapper\/tomb/ {
if($7!=tomb) next;
if(main=="") { main=$1; next; }
if(main==$1)
print $1 ";" $3 ";" $5 ";" $6 ";" $7
}
'
# list bind hooks on util-linux 2.17 (Debian 6)
tombmount=`mount -l \
| awk -vtomb="$1" '
/^\/dev\/mapper\/tomb/ { if($7!=tomb) next; print $3; exit; }'`
mount -l | grep "^$tombmount" \
| awk -vtomb="$1" '
/bind/ { print $1 ";" $3 ";" $5 ";" $6 ";" $7 }'
}
# }}} - Tomb list
# {{{ Index and search
# index files in all tombs for search
# $1 is optional, to specify a tomb
index_tombs() {
{ command -v updatedb > /dev/null } || {
_failure "Cannot index tombs on this system: updatedb (mlocate) not installed." }
updatedbver=`updatedb --version | grep '^updatedb'`
[[ "$updatedbver" =~ "GNU findutils" ]] && {
_warning "Cannot use GNU findutils for index/search commands." }
[[ "$updatedbver" =~ "mlocate" ]] || {
_failure "Index command needs 'mlocate' to be installed." }
_verbose "$updatedbver"
mounted_tombs=(`list_tomb_mounts $1`)
{ test ${#mounted_tombs} = 0 } && {
if [ $1 ]; then _failure "There seems to be no open tomb engraved as [$1]"
else _failure "I can't see any open tomb, may they all rest in peace."
fi
}
_success "Creating and updating search indexes."
# start the LibreOffice document converter if installed
{ command -v unoconv >/dev/null } && {
unoconv -l 2>/dev/null &
_verbose "unoconv listener launched."
sleep 1 }
for t in ${mounted_tombs}; do
mapper=`basename ${t[(ws:;:)1]}`
tombname=${t[(ws:;:)5]}
tombmount=${t[(ws:;:)2]}
{ test -r ${tombmount}/.noindex } && {
_message "Skipping $tombname (.noindex found)."
continue }
_message "Indexing $tombname filenames..."
updatedb -l 0 -o ${tombmount}/.updatedb -U ${tombmount}
# here we use swish to index file contents
{ test $SWISH = 1 } && {
_message "Indexing $tombname contents..."
swishrc=`safe_filename swish`
cat <<EOF > $swishrc
# index directives
DefaultContents TXT*
IndexDir $tombmount
IndexFile $tombmount/.swish
# exclude images
FileRules filename regex /\.jp.?g/i
FileRules filename regex /\.png/i
FileRules filename regex /\.gif/i
FileRules filename regex /\.tiff/i
FileRules filename regex /\.svg/i
FileRules filename regex /\.xcf/i
FileRules filename regex /\.eps/i
FileRules filename regex /\.ttf/i
# exclude audio
FileRules filename regex /\.mp3/i
FileRules filename regex /\.ogg/i
FileRules filename regex /\.wav/i
FileRules filename regex /\.mod/i
FileRules filename regex /\.xm/i
# exclude video
FileRules filename regex /\.mp4/i
FileRules filename regex /\.avi/i
FileRules filename regex /\.ogv/i
FileRules filename regex /\.ogm/i
FileRules filename regex /\.mkv/i
FileRules filename regex /\.mov/i
# exclude system
FileRules filename is ok
FileRules filename is lock
FileRules filename is control
FileRules filename is status
FileRules filename is proc
FileRules filename is sys
FileRules filename is supervise
FileRules filename regex /\.asc$/i
FileRules filename regex /\.gpg$/i
# pdf and postscript
FileFilter .pdf pdftotext "'%p' -"
FileFilter .ps ps2txt "'%p' -"
# compressed files
FileFilterMatch lesspipe "%p" /\.tgz$/i
FileFilterMatch lesspipe "%p" /\.zip$/i
FileFilterMatch lesspipe "%p" /\.gz$/i
FileFilterMatch lesspipe "%p" /\.bz2$/i
FileFilterMatch lesspipe "%p" /\.Z$/
# spreadsheets
FileFilterMatch unoconv "-d spreadsheet -f csv --stdout %P" /\.xls.*/i
FileFilterMatch unoconv "-d spreadsheet -f csv --stdout %P" /\.xlt.*/i
FileFilter .ods unoconv "-d spreadsheet -f csv --stdout %P"
FileFilter .ots unoconv "-d spreadsheet -f csv --stdout %P"
FileFilter .dbf unoconv "-d spreadsheet -f csv --stdout %P"
FileFilter .dif unoconv "-d spreadsheet -f csv --stdout %P"
FileFilter .uos unoconv "-d spreadsheet -f csv --stdout %P"
FileFilter .sxc unoconv "-d spreadsheet -f csv --stdout %P"
# word documents
FileFilterMatch unoconv "-d document -f txt --stdout %P" /\.doc.*/i
FileFilterMatch unoconv "-d document -f txt --stdout %P" /\.odt.*/i
FileFilterMatch unoconv "-d document -f txt --stdout %P" /\.rtf.*/i
FileFilterMatch unoconv "-d document -f txt --stdout %P" /\.tex$/i
# native html support
IndexContents HTML* .htm .html .shtml
IndexContents XML* .xml
EOF
_verbose "Using swish-e to create index."
swish-e -c $swishrc -S fs -v3
rm -f $swishrc
}
_message "Search index updated."
done
}
search_tombs() {
{ command -v locate > /dev/null } || {
_failure "Cannot index tombs on this system: updatedb (mlocate) not installed." }
updatedbver=`updatedb --version | grep '^updatedb'`
[[ "$updatedbver" =~ "GNU findutils" ]] && {
_warning "Cannot use GNU findutils for index/search commands." }
[[ "$updatedbver" =~ "mlocate" ]] || {
_failure "Index command needs 'mlocate' to be installed." }
_verbose "$updatedbver"
# list all open tombs
mounted_tombs=(`list_tomb_mounts`)
if [ ${#mounted_tombs} = 0 ]; then
_failure "I can't see any open tomb, may they all rest in peace."; fi
_success "Searching for: $fg_bold[white]${(f)@}$fg_no_bold[white]"
for t in ${mounted_tombs}; do
_verbose "Checking for index: ${t}"
mapper=`basename ${t[(ws:;:)1]}`
tombname=${t[(ws:;:)5]}
tombmount=${t[(ws:;:)2]}
if [ -r ${tombmount}/.updatedb ]; then
# use mlocate to search hits on filenames
_message "Searching filenames in tomb $tombname"
locate -d ${tombmount}/.updatedb -e -i "${(f)@}"
_message "Matches found: `locate -d ${tombmount}/.updatedb -e -i -c ${(f)@}`"
# use swish-e to search over contents
{ test $SWISH = 1 } && { test -r $tombmount/.swish } && {
_message "Searching contents in tomb $tombname"
swish-search -w ${=@} -f $tombmount/.swish -H0 }
else
_warning "Skipping tomb $tombname: not indexed."
_warning "Run 'tomb index' to create indexes."
fi
done
_message "Search completed."
}
# }}} - Index and search
# {{{ Resize
# resize tomb file size
resize_tomb() {
_message "Commanded to resize tomb $1 to $opts[-s] megabytes."
if ! [ $1 ]; then
_failure "No tomb name specified for resizing."
elif ! [ -r "$1" ]; then
_failure "Cannot find $1"
fi
# $1 is the tomb file path
local newtombsize="`option_value -s`"
{ test "$newtombsize" = "" } && {
_failure "Aborting operations: new size was not specified, use -s" }
local c tombpass tombkey
tombdir=`dirname $1`
tombfile=`basename $1`
tombname=${tombfile%%\.*}
# load key from options or file
local tombkey="`load_key ${tombdir}/${tombfile}`"
# make sure to call drop_key later
{ test -r "$tombkey" } || {
_failure "Aborting operations: key not found, use -k" }
local oldtombsize=$(( `stat -c %s "$1" 2>/dev/null` / 1048576 ))
local mounted_tomb=`mount -l |
awk -vtomb="[$tombname]" '/^\/dev\/mapper\/tomb/ { if($7==tomb) print $1 }'`
if [ "$mounted_tomb" ]; then
_failure "The tomb $tombname is open, to resize it it needs to be closed."
fi
if ! [ "$newtombsize" ] ; then
_failure "You must specify the new size of $tombname"
elif [[ $newtombsize != <-> ]]; then
_failure "Size is not an integer."
elif [ "$newtombsize" -le "$oldtombsize" ]; then
_failure "The new size must be greater then old tomb size."
fi
delta="$(( $newtombsize - $oldtombsize ))"
act "Generating ${tombfile} of ${newtombsize}MiB"
_verbose "Data dump using ${DD[1]} from /dev/urandom"
${=DD} if=/dev/urandom bs=1048576 count=${delta} >> ${tombdir}/${tombfile}
{ test $? = 0 } || {
_failure "Error creating the extra resize $tmp_resize, operation aborted." }
if option_is_set --tomb-pwd; then
tomb_pwd="`option_value --tomb-pwd`"
_verbose "--tomb-pwd = $tomb_pwd"
tombpass=`ask_key_password "$tombkey" "$tomb_pwd"`
else
tombpass=`ask_key_password "$tombkey"`
fi
{ test $? = 0 } || {
_failure "No valid password supplied." }
local nstloop=`losetup -f`
if [ $? = 255 ]; then
_failure "Too many tombs opened. Please close any of them to open another tomb."
fi
losetup -f ${tombdir}/${tombfile}
local mapdate=`date +%s`
local mapper="tomb.${tombname}.${mapdate}.`basename $nstloop`"
get_lukskey "${tombpass}" ${tombkey} | \
cryptsetup --key-file - luksOpen ${nstloop} ${mapper}
drop_key # cleanup after load_key
unset tombpass
if ! [ -r /dev/mapper/${mapper} ]; then
losetup -d ${nstloop}
_failure "Failure mounting the encrypted file."
fi
cryptsetup resize "${mapper}"
if [ $? != 0 ]; then
losetup -d ${nstloop}
_failure "cryptsetup failed to resize $mapper"
fi
e2fsck -p -f /dev/mapper/${mapper}
if [ $? != 0 ]; then
losetup -d ${nstloop}
_failure "e2fsck failed to check $mapper"
fi
resize2fs /dev/mapper/${mapper}
if [ $? != 0 ]; then
losetup -d ${nstloop}
_failure "resize2fs failed to resize $mapper"
fi
sleep 1 # needs to settle a bit
# close and free the loop device
cryptsetup luksClose "${mapper}"
losetup -d ${nstloop}
return 0
}
# }}}
# {{{ Close
umount_tomb() {
local tombs how_many_tombs
local pathmap mapper tombname tombmount loopdev
local ans pidk pname
if [ "$1" = "all" ]; then
mounted_tombs=(`list_tomb_mounts`)
else
mounted_tombs=(`list_tomb_mounts $1`)
fi
{ test ${#mounted_tombs} = 0 } && {
_warning "There is no open tomb to be closed."
return 1 }
{ test ${#mounted_tombs} -gt 1 } && { test "$1" = "" } && {
_warning "Too many tombs mounted, please specify one (see tomb list)"
_warning "or issue the command 'tomb close all' to close them all."
return 1 }
_message "Tomb close $1"
for t in ${mounted_tombs}; do
mapper=`basename ${t[(ws:;:)1]}`
tombname=${t[(ws:;:)5]}
tombmount=${t[(ws:;:)2]}
tombfs=${t[(ws:;:)3]}
tombfsopts=${t[(ws:;:)4]}
tombloop=${mapper[(ws:.:)4]}
_verbose "Name: $tombname"
_verbose "Mount: $tombmount"
_verbose "Mapper: $mapper"
{ test -e "$mapper" } && {
_warning "Tomb not found: $1"
_warning "Please specify an existing tomb."
return 0 }
if [ $SLAM ]; then
_success "Slamming tomb $tombname mounted on $tombmount"
_message "Kill all processes busy inside the tomb."
if ! slam_tomb "$tombmount"; then
_warning "Cannot slam the tomb $tombname"
return 1
fi
else
_message "Closing tomb $tombname mounted on $tombmount"
fi
# check if there are binded dirs and close them
bind_tombs=(`list_tomb_binds $tombname`)
for b in ${bind_tombs}; do
bind_mapper="${b[(ws:;:)1]}"
bind_mount="${b[(ws:;:)2]}"
_message "Closing tomb bind hook: $bind_mount"
umount $bind_mount
if [[ $? != 0 ]]; then
if [ $SLAM ]; then
_success "Slamming tomb: killing all processes using this hook."
slam_tomb "$bind_mount"
if [[ $? == 1 ]]; then
_warning "Cannot slam the bind hook $bind_mount"
return 1
fi
umount $bind_mount
else
_warning "Tomb bind hook $bind_mount is busy, cannot close tomb."
fi
fi
done
# Execute post-hooks for eventual cleanup
if ! option_is_set -n ; then
exec_safe_post_hooks ${tombmount%%/} close
fi
_verbose "Performing umount of $tombmount"
umount ${tombmount}
if ! [ $? = 0 ]; then _warning "Tomb is busy, cannot umount!"
else
# this means we used a "default" mount point
{ test "${tombmount}" = "/media/${tombname}.tomb" } && {
rmdir ${tombmount} }
fi
cryptsetup luksClose $mapper
{ test $? = 0 } || {
_warning "Error occurred in cryptsetup luksClose ${mapper}"
return 1 }
losetup -d "/dev/$tombloop"
_success "Tomb $tombname closed: your bones will rest in peace."
done # loop across mounted tombs
return 0
}
# Kill all processes using the tomb
slam_tomb() {
# $1 = tomb mount point
if [[ -z `fuser -m "$1" 2> /dev/null` ]]; then
return 0
fi
#Note: shells are NOT killed by INT or TERM, but they are killed by HUP
for s in TERM HUP KILL; do
_verbose "Sending $s to processes inside the tomb:"
if option_is_set -D; then
ps -fp `fuser -m /media/a.tomb 2> /dev/null`|
while read line; do
_verbose $line
done
fi
fuser -s -m "$1" -k -M -$s
if [[ -z `fuser -m "$1" 2> /dev/null` ]]; then
return 0
fi
if ! option_is_set -f; then
sleep 3
fi
done
return 1
}
# }}} - Tomb close
# {{{ Main routine
main() {
local -A subcommands_opts
### Options configuration
# Hi, dear developer! Are you trying to add a new subcommand, or
# to add some options? Well, keep in mind that an option CAN'T
# have differente meanings/behaviour in different subcommands.
# For example, "-s" means "size" and accept an argument. If you are tempted to add
# an option "-s" (that means, for example "silent", and doesn't accept an argument)
# DON'T DO IT!
# There are two reasons for that:
# I. usability; user expect that "-s" is "size"
# II. Option parsing WILL EXPLODE if you do this kind of bad things
# (it will say "option defined more than once, and he's right")
#
# If you want to use the same option in multiple commands then
# you can only use the non-abbreviated long-option version like:
# -force and NOT -f
main_opts=(q -quiet=q D -debug=D h -help=h v -version=v U: -uid=U G: -gid=G T: -tty=T -no-color -unsecure-dev-mode)
subcommands_opts[__default]=""
subcommands_opts[open]="f -force n -nohook=n k: -key=k -kdf: o: -ignore-swap -sudo-pwd: -tomb-pwd: "
subcommands_opts[mount]=${subcommands_opts[open]}
subcommands_opts[create]="" # deprecated, will issue warning
subcommands_opts[forge]="f -force -ignore-swap k: -key=k -kdf: o: -tomb-pwd: -use-urandom "
subcommands_opts[dig]="f -force -ignore-swap s: -size=s "
subcommands_opts[lock]="f -force -ignore-swap k: -key=k -kdf: o: -sudo-pwd: -tomb-pwd: "
subcommands_opts[setkey]="k: -key=k f -force -ignore-swap -kdf: -sudo-pwd: -tomb-old-pwd: -tomb-pwd: "
subcommands_opts[engrave]="k: -key=k "
subcommands_opts[passwd]="k: -key=k f -force -ignore-swap -kdf: -tomb-old-pwd: -tomb-pwd: "
subcommands_opts[close]="-sudo-pwd: "
subcommands_opts[help]=""
subcommands_opts[slam]=""
subcommands_opts[list]="-get-mountpoint "
subcommands_opts[index]=""
subcommands_opts[search]=""
subcommands_opts[help]=""
subcommands_opts[bury]="f -force k: -key=k -tomb-pwd: "
subcommands_opts[exhume]="f -force k: -key=k -tomb-pwd: "
# subcommands_opts[decompose]=""
# subcommands_opts[recompose]=""
# subcommands_opts[install]=""
subcommands_opts[askpass]=""
subcommands_opts[mktemp]=""
subcommands_opts[source]=""
subcommands_opts[resize]="f -force -ignore-swap s: -size=s k: -key=k -tomb-pwd: "
subcommands_opts[check]="-ignore-swap "
# subcommands_opts[translate]=""
### Detect subcommand
local -aU every_opts #every_opts behave like a set; that is, an array with unique elements
for optspec in $subcommands_opts$main_opts; do
for opt in ${=optspec}; do
every_opts+=${opt}
done
done
local -a oldstar
oldstar=($argv)
#### detect early: useful for --optiion-parsing
zparseopts -M -D -Adiscardme ${every_opts}
if [[ -n ${(k)discardme[--option-parsing]} ]]; then
echo $1
if [[ -n "$1" ]]; then
return 1
fi
return 0
fi
unset discardme
if ! zparseopts -M -E -D -Adiscardme ${every_opts}; then
_failure "Error parsing."
return 127
fi
unset discardme
subcommand=$1
if [[ -z $subcommand ]]; then
subcommand="__default"
fi
if [[ -z ${(k)subcommands_opts[$subcommand]} ]]; then
_warning "There's no such command \"$subcommand\"."
_failure "Please try -h for help." 127
# _failure "Subcommand '$subcommand' doesn't exist" 127
fi
argv=(${oldstar})
unset oldstar
### Parsing global + command-specific options
# zsh magic: ${=string} will split to multiple arguments when spaces occur
set -A cmd_opts ${main_opts} ${=subcommands_opts[$subcommand]}
# if there is no option, we don't need parsing
if [[ -n $cmd_opts ]]; then
zparseopts -M -E -D -Aopts ${cmd_opts}
if [[ $? != 0 ]]; then
_warning "Some error occurred during option processing."
_failure "See \"tomb help\" for more info." 127
fi
fi
#build PARAM (array of arguments) and check if there are unrecognized options
ok=0
PARAM=()
for arg in $*; do
if [[ $arg == '--' || $arg == '-' ]]; then
ok=1
continue #it shouldnt be appended to PARAM
elif [[ $arg[1] == '-' ]]; then
if [[ $ok == 0 ]]; then
_failure "Unrecognized option $arg for subcommand $subcommand" 127
fi
fi
PARAM+=$arg
done
#first parameter actually is the subcommand: delete it and shift
if [[ $subcommand != '__default' ]]; then
PARAM[1]=()
shift
fi
### End parsing command-specific options
if ! option_is_set --no-color; then
autoload colors; colors
fi
if ! option_is_set --unsecure-dev-mode; then
for opt in --sudo-pwd --tomb-pwd --use-urandom --tomb-old-pwd; do
if option_is_set $opt; then
_failure "You specified option $opt, which is DANGEROUS and should only be used for testing\nIf you really want so, add --unsecure-dev-mode" 127
fi
done
fi
# when we run as root, we remember the original uid:gid
# to set permissions for the calling user and drop privileges
if option_is_set -U; then _uid="`option_value -U`"; fi
if option_is_set -G; then _gid="`option_value -G`"; fi
if option_is_set -T; then _tty="`option_value -T`"; fi
_verbose "Tomb command: $subcommand ${PARAM}"
_verbose "Caller: uid[$_uid], gid[$_gid], tty[$_tty]."
case "$subcommand" in
# new creation in three steps
forge)
check_priv
forge_key ${=PARAM}
;;
dig)
dig_tomb ${=PARAM}
;;
lock)
check_priv
lock_tomb_with_key ${=PARAM}
;;
setkey)
check_priv
change_tomb_key ${=PARAM}
;;
engrave)
{ test "$QRENCODE" = 0 } && {
_failure "QREncode not installed: cannot engrave keys on paper." }
engrave_key ${=PARAM}
;;
# backward compat
create)
_warning "The create command is deprecated, please use dig, forge and lock instead."
_warning "For more informations see Tomb's manual page (man tomb)."
;;
mount|open)
check_priv
mount_tomb $PARAM[1] $PARAM[2]
;;
umount|close|slam)
check_priv
[ "$subcommand" = "slam" ] && SLAM=1
umount_tomb $PARAM[1]
;;
passwd)
change_passwd $PARAM[1]
;;
list)
list_tombs $PARAM[1]
;;
index)
index_tombs $PARAM[1]
;;
search)
search_tombs ${=PARAM}
;;
help)
usage
;;
bury)
{ test "$STEGHIDE" = 0 } && {
_failure "Steghide not installed: cannot bury keys into images." }
bury_key $PARAM[1]
;;
exhume)
{ test "$STEGHIDE" = 0 } && {
_failure "Steghide not installed: cannot exhume keys from images." }
exhume_key $PARAM[1]
;;
resize)
{ test "$RESIZER" = 0 } && {
_failure "Resize2fs not installed: cannot resize tombs." }
check_priv
resize_tomb $PARAM[1]
;;
# internal commands useful to developers
'source') return 0 ;;
install) check_priv ; install_tomb ;;
askpass) ask_password $PARAM[1] $PARAM[2] ;;
mktemp) safe_dir $PARAM[1] ;;
translate) generate_translatable_strings ;;
__default)
cat <<EOF
Tomb $VERSION - a strong and gentle undertaker for your secrets
Copyright (C) 2007-2014 Dyne.org Foundation, License GNU GPL v3+
This is free software: you are free to change and redistribute it
The latest Tomb sourcecode is published on <http://tomb.dyne.org>
EOF
option_is_set -v && {
cat <<EOF
This source code is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the GNU Public License for more details.
System utils:
`sudo -V | head -n1`
`cryptsetup --version`
`pinentry --version`
`gpg --version | head -n1` - key forging algorithms (GnuPG symmetric ciphers):
`list_gnupg_ciphers`
EOF
return 0
}
usage
;;
*)
_warning "Command \"$subcommand\" not recognized."
_message "Try -h for help."
return 1
;;
esac
return $?
}
# }}}
# {{{ Run
check_bin
main $@
ret=$?
if [[ $ret != 0 ]]; then #this "if" seems useless, but avoid source tomb source from exiting
exit $ret
fi
# }}}
# -*- tab-width: 4; indent-tabs-mode:nil; -*-
# vim: set shiftwidth=4 expandtab: