Places the lines of var2 to the right of the lines of var1 seperated by the chars that are put between var1 and var2. For example: ${combine ${head /proc/cpuinfo 2} - ${head /proc/meminfo 1}} gives as output "cpuinfo_line1 - meminfo_line1" on line 1 and "cpuinfo_line2 -" on line 2. $combine vars can also be nested to place more vars next to each other.
CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu cpuX} (X >= 1) are individual CPUs.
CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Disk IO graph for reads, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Disk IO graph for writes, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Evalutates given string according to the rules of TEXT interpretation, i.e. parsing any contained text object specifications into their output, any occuring '$$' into a single '$' and so on. The output is then being parsed again.
Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch.
Same as exec, except if the first value return is a value between 0-100, it will use that number for a bar. The size for bars can be controlled via the default_bar_size config setting.
Same as exec, except if the first value returned is a value between 0-100, it will use that number for a gauge. The size for gauges can be controlled via the default_gauge_size config setting.
Same as execbar, but graphs values. Uses a logaritmic scale when the log option is given (to see small numbers). Values still have to be between 0 and 100. The size for graphs can be controlled via the default_graph_size config setting. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch. This differs from $exec in that it parses the output of the command, so you can insert things like ${color red}hi!${color} in your script and have it correctly parsed by Conky.
Caveats: Conky parses and evaluates the output of $execp every time Conky loops, and then destroys all the objects. If you try to use anything like $execi within an $execp statement, it will functionally run at the same interval that the $execp statement runs, as it is created and destroyed at every interval.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execpi</option></command>
<option>interval command</option>
</term>
<listitem>
Same as execp but with specific interval. Interval can't be less than update_interval in configuration. Note that the output from the $execpi command is still parsed and evaluated at every interval.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>font</option></command>
<option>(font)</option>
</term>
<listitem>
Specify a different font. This new font will apply to the current line and everything following. You can use a $font with no arguments to change back to the default font (much like with $color)
Displays the default route's interface or "multiple"/"none" accordingly.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>gw_ip</option></command>
</term>
<listitem>
Displays the default gateway's IP or "multiple"/"none" accordingly.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>hddtemp</option></command>
<option>dev, (host,(port))</option>
</term>
<listitem>
Displays temperature of a selected hard disk drive as reported by the hddtemp daemon running on host:port.
Default host is 127.0.0.1, default port is 7634.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>head</option></command>
<option>logfile lines (interval)</option>
</term>
<listitem>
Displays first N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one hwmon device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/class/hwmon/ on your local computer. The optional arguments 'factor' and 'offset' allow precalculation of the raw input, which is being modified as follows: 'input = input * factor + offset'. Note that they have to be given as decimal values (i.e. contain at least one decimal place).
Renders an image from the path specified using IMLIB2. Takes 2 optional arguments, one being a position, the other an size. Changing the x,y position will move the position of the image, and changing the WxH will scale the image. Example: ${image /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will render 'cheeseburger.jpg' at (20,20) scaled to 200x200 pixels. Conky does not make any attempt to adjust the position (or any other formatting) of images, they are just rendered as per the arguments passed. The only reason $image is part of the TEXT section, is to allow for runtime modifications, through $execp $lua_parse, $lua_read_parse, or some other method.
I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one I2C device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer. The optional arguments 'factor' and 'offset' allow precalculation of the raw input, which is being modified as follows: 'input = input * factor + offset'. Note that they have to be given as decimal values (i.e. contain at least one decimal place).
If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in /proc/i8k (translated to human-readable). Beware that this is by default not enabled by i8k itself.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_bios</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k.
If running the i8k kernel driver for Inspiron laptops, displays the left fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
If running the i8k kernel driver for Inspiron laptops, displays the right fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_serial</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_version</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ibm_fan</option></command>
</term>
<listitem>
If running the IBM ACPI, displays the fan speed.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ibm_temps</option></command>
<option>N</option>
</term>
<listitem>
If running the IBM ACPI, displays the temperatures
from the IBM temperature sensors (N=0..7) Sensor 0 is
on the CPU, 3 is on the GPU.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ibm_volume</option></command>
</term>
<listitem>
If running the IBM ACPI, displays the "master" volume,
Displays the number of messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f folder] [-p port] [-e command] [-r retries]". Default port is 143, default folder is 'INBOX', default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
Displays the number of unseen messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f folder] [-p port] [-e command] [-r retries]". Default port is 143, default folder is 'INBOX', default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
Load1 average graph, similar to xload, with optional colours in hex, minus the #. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
<option>(-n number of messages to print) (-fw from width) (-sw subject width) mbox</option>
</term>
<listitem>
Print a summary of recent messages in an mbox format mailbox. mbox parameter is the filename of the mailbox (can be encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}
Memory usage graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Prints the mixer value as reported by the OS. Default mixer is "vol", but you can specify one of the following optional arguments: "vol", "bass", "treble", "synth", "pcm", "speaker", "line", "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", "line1", "line2", "line3", "dig1", "dig2", "dig3", "phin", "phout", "video", "radio", "monitor". Refer to the definition of SOUND_DEVICE_NAMES in <linux/soundcard.h> (on Linux), <soundcard.h> (on OpenBSD), or <sys/soundcard.h> to find the exact options available on your system.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mixerbar</option></command>
<option>(device)</option>
</term>
<listitem>
Displays mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mixerr</option></command>
<option>(device)</option>
</term>
<listitem>
Prints the right channel mixer value as reported by the OS. See docs for $mixer for details on arguments.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mixerrbar</option></command>
<option>(device)</option>
</term>
<listitem>
Displays the right channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mixerl</option></command>
<option>(device)</option>
</term>
<listitem>
Prints the left channel mixer value as reported by the OS. See docs for $mixer for details on arguments.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mixerlbar</option></command>
<option>(device)</option>
</term>
<listitem>
Displays the left channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one platform device. Platform type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/bus/platform/devices/ on your local computer. The optional arguments 'factor' and 'offset' allow precalculation of the raw input, which is being modified as follows: 'input = input * factor + offset'. Note that they have to be given as decimal values (i.e. contain at least one decimal place).
Displays the number of unseen messages in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e command] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
Displays the amount of space (in MiB, 2^20) used in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e command] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
Scroll 'text' by 'step' characters showing 'length' number of characters at the same time. The text may also contain variables. 'step' is optional and defaults to 1 if not set. If a var creates output on multiple lines then the lines are placed behind each other separated with a '|'-sign. Do NOT use vars that change colors or otherwise affect the design inside a scrolling text. If you want spaces between the start and the end of 'text', place them at the end of 'text' not at the front ("foobar" and " foobar" can both generate "barfoo" but "foobar " will keep the spaces like this "bar foo").
when using smapi, display contents of the /sys/devices/platform/smapi directory. ARGS are either '(FILENAME)' or 'bat (INDEX) (FILENAME)' to display the corresponding files' content. This is a very raw method of accessing the smapi values. When available, better use one of the smapi_* variables instead.
when using smapi, display the remaining capacity in percent of the battery with index INDEX. This is a separate variable because it supports the 'use_spacer' configuration option.
when using smapi, display the current power of the battery with index INDEX in watt. This is a separate variable because the original read out value is being converted from mW. The sign of the output reflects charging (positive) or discharging (negative) state.
when using smapi, display the current temperature of the battery with index INDEX in degree Celsius. This is a separate variable because the original read out value is being converted from milli degree Celsius.
<member><command>lport</command> - local port number
</member>
<member><command>lservice</command> - local service name from /etc/services
</member>
</simplelist>The connection index provides you with access to each connection in the port monitor. The monitor will return information for index values from 0 to n-1 connections. Values higher than n-1 are simply ignored. For the "count" item, the connection index must be omitted. It is required for all other items.
displays the local service name of the fifteenth connection in the range of all ports</member>
</simplelist>Note that port monitor variables which share the same port range actually refer to the same monitor, so many references to a single port range for different items and different indexes all use the same monitor internally. In other words, the program avoids creating redundant monitors.
</listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>texeci</option></command>
<option>interval command</option>
</term>
<listitem>
Runs a command at an interval inside a thread and displays the output. Same as $execi, except the command is run inside a thread. Use this if you have a slow script to keep Conky updating. You should make the interval slightly longer then the time it takes your script to execute. For example, if you have a script that take 5 seconds to execute, you should make the interval at least 6 seconds. See also $execi.
Download and parse RSS feeds. Action may be one of the following: feed_title, item_title (with num par), item_desc (with num par) and item_titles (when using this action and spaces_in_front is given conky places that many spaces in front of each item).
Executes a Lua function with given parameters as per $lua, then parses and prints the result value as per the syntax for Conky's TEXT section. See also 'lua_load' on how to load scripts.
Executes a Lua function per $lua, except takes a 2nd argument which is first evaluated as per Conky's TEXT section and passed to the function first. The return value is then parsed and prints the result value as per the syntax for Conky's TEXT section. See also 'lua_load' on how to load scripts.
Executes a Lua function with given parameters and draws a bar. Expects result value to be an integer between 0 and 100. See also 'lua_load' on how to load scripts.
Executes a Lua function with given parameters and draws a graph. Expects result value to be an integer between 0 and 100. See also 'lua_load' on how to load scripts. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Executes a Lua function with given parameters and draws a gauge. Expects result value to be an integer between 0 and 100. See also 'lua_load' on how to load scripts.
Displays last N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
Local time, see man strftime to get more information about format
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>utime</option></command>
<option>(format)</option>
</term>
<listitem>
Display time in UTC (universal coordinate time).
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>tztime</option></command>
<option>(timezone) (format)</option>
</term>
<listitem>
Local time for specified timezone, see man strftime to get more information about format. The timezone argument is specified in similar fashion as TZ environment variable. For hints, look in /usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>totaldown</option></command>
<option>net</option>
</term>
<listitem>
Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before conky has started.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>top</option></command>
<option>type, num</option>
</term>
<listitem>
This takes arguments in the form:top (name) (number) Basically, processes are ranked from highest to lowest in terms of cpu usage, which is what (num) represents. The types are: "name", "pid", "cpu", "mem", "mem_res", "mem_vsize", and "time". There can be a max of 10 processes listed.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>top_mem</option></command>
<option>type, num</option>
</term>
<listitem>
Same as top, except sorted by mem usage instead of cpu
Upload speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal". Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see).
Fetches your currently training skill from the Eve Online API servers (http://www.eve-online.com/) and displays the skill along with the remaining training time.
