conky/cmake/CodeCoverage.cmake

# Copyright (c) 2012 - 2017, Lars Bilke All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
#   list of conditions and the following disclaimer.
#
# 1. Redistributions in binary form must reproduce the above copyright notice,
#   this list of conditions and the following disclaimer in the documentation
#   and/or other materials provided with the distribution.
#
# 1. Neither the name of the copyright holder nor the names of its contributors
#   may be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# CHANGES:
#
# 2012-01-31, Lars Bilke - Enable Code Coverage
#
# 2013-09-17, Joakim Söderberg - Added support for Clang. - Some additional
# usage instructions.
#
# 2016-02-03, Lars Bilke - Refactored functions to use named parameters
#
# 2017-06-02, Lars Bilke - Merged with modified version from github.com/ufz/ogs
#
# USAGE:
#
# 1. Copy this file into your cmake modules path.
#
# 1. Add the following line to your CMakeLists.txt: include(CodeCoverage)
#
# 1. Append necessary compiler flags: APPEND_COVERAGE_COMPILER_FLAGS()
#
# 1. If you need to exclude additional directories from the report, specify them
#   using the COVERAGE_LCOV_EXCLUDES variable before calling
#   SETUP_TARGET_FOR_COVERAGE_LCOV. Example: set(COVERAGE_LCOV_EXCLUDES 'dir1/*'
#   'dir2/*')
#
# 1. Use the functions described below to create a custom make target which runs
#   your test executable and produces a code coverage report.
#
# 1. Build a Debug build: cmake -DCMAKE_BUILD_TYPE=Debug .. make make
#   my_coverage_target
#

include(CMakeParseArguments)

# Check prereqs
find_program(GCOV_PATH
             NAMES ${CMAKE_SOURCE_DIR}/tests/llvm-gcov.sh gcov
             PATHS ENV PATH)
find_program(LCOV_PATH
             NAMES lcov
                   lcov.bat
                   lcov.exe
                   lcov.perl
             PATHS ENV PATH)
find_program(LLVM_COV_PATH
             NAMES
                   llvm-cov110
                   llvm-cov-11
                   llvm-cov100
                   llvm-cov-10
                   llvm-cov90
                   llvm-cov-9
                   llvm-cov80
                   llvm-cov-8
                   llvm-cov70
                   llvm-cov-7
                   llvm-cov
             PATHS ENV PATH)
find_program(LLVM_PROFDATA_PATH
             NAMES
                   llvm-profdata110
                   llvm-profdata-11
                   llvm-profdata100
                   llvm-profdata-10
                   llvm-profdata90
                   llvm-profdata-9
                   llvm-profdata80
                   llvm-profdata-8
                   llvm-profdata70
                   llvm-profdata-7
                   llvm-profdata
             PATHS ENV PATH)
find_program(GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat)
find_program(GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/scripts/test)
find_program(SIMPLE_PYTHON_EXECUTABLE python)

if(NOT GCOV_PATH)
  message(FATAL_ERROR "gcov not found! Aborting...")
endif() # NOT GCOV_PATH

if("${CMAKE_CXX_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
  if("${CMAKE_CXX_COMPILER_VERSION}" VERSION_LESS 3)
    message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
  endif()
elseif(NOT CMAKE_COMPILER_IS_GNUCXX)
  message(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
endif()

set(
  COVERAGE_COMPILER_FLAGS
  -g -O0 -fprofile-arcs -ftest-coverage -fprofile-instr-generate -fcoverage-mapping
  CACHE INTERNAL "")

set(CMAKE_CXX_FLAGS_COVERAGE ${COVERAGE_COMPILER_FLAGS}
    CACHE STRING "Flags used by the C++ compiler during coverage builds."
    FORCE)
set(CMAKE_C_FLAGS_COVERAGE ${COVERAGE_COMPILER_FLAGS}
    CACHE STRING "Flags used by the C compiler during coverage builds."
    FORCE)
set(CMAKE_EXE_LINKER_FLAGS_COVERAGE ""
    CACHE STRING "Flags used for linking binaries during coverage builds."
    FORCE)
set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE ""
    CACHE STRING
          "Flags used by the shared libraries linker during coverage builds."
    FORCE)
mark_as_advanced(CMAKE_CXX_FLAGS_COVERAGE
                 CMAKE_C_FLAGS_COVERAGE
                 CMAKE_EXE_LINKER_FLAGS_COVERAGE
                 CMAKE_SHARED_LINKER_FLAGS_COVERAGE)

if(NOT CMAKE_BUILD_TYPE STREQUAL "Debug")
  message(
    WARNING
      "Code coverage results with an optimised (non-Debug) build may be misleading"
    )
endif() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug"

if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
  link_libraries(gcov)
else()
  add_link_options($<$<NOT:$<COMPILE_LANG_AND_ID:C,GNU>>:-fprofile-instr-generate>)
endif()

# Defines a target for running and collection code coverage information Builds
# dependencies, runs the given executable and outputs reports. NOTE! The
# executable should always have a ZERO as exit code otherwise the coverage
# generation will not complete.
#
# SETUP_TARGET_FOR_COVERAGE_LCOV_HTML( NAME testrunner_coverage # New target
# name EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in
# PROJECT_BINARY_DIR DEPENDENCIES testrunner                     # Dependencies
# to build first )
function(SETUP_TARGET_FOR_COVERAGE_LCOV_HTML)

  set(options NONE)
  set(oneValueArgs NAME)
  set(multiValueArgs
      EXECUTABLE
      EXECUTABLE_ARGS
      DEPENDENCIES
      LCOV_ARGS
      GENHTML_ARGS)
  cmake_parse_arguments(Coverage
                        "${options}"
                        "${oneValueArgs}"
                        "${multiValueArgs}"
                        ${ARGN})

  if(NOT LCOV_PATH)
    message(FATAL_ERROR "lcov not found! Aborting...")
  endif() # NOT LCOV_PATH

  if(NOT GENHTML_PATH)
    message(FATAL_ERROR "genhtml not found! Aborting...")
  endif() # NOT GENHTML_PATH

  # Setup target
  add_custom_target(
    ${Coverage_NAME}
    # Cleanup lcov
    COMMAND ${LCOV_PATH} ${Coverage_LCOV_ARGS}
            --gcov-tool ${GCOV_PATH} -directory .
            --zerocounters # Create baseline to make sure untouched files show
                           # up in the report
    COMMAND ${LCOV_PATH} ${Coverage_LCOV_ARGS}
            --gcov-tool ${GCOV_PATH} -c -i -d . -o ${Coverage_NAME}.base
                        # Run tests
    COMMAND ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
            # Capturing lcov counters and generating report
    COMMAND ${LCOV_PATH} ${Coverage_LCOV_ARGS}
            --gcov-tool ${GCOV_PATH}
            --directory .
            --capture
            --output-file ${Coverage_NAME}.info
                          # add baseline counters
    COMMAND ${LCOV_PATH} ${Coverage_LCOV_ARGS}
            --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base -a
                        ${Coverage_NAME}.info
            --output-file ${Coverage_NAME}.total
    COMMAND ${LCOV_PATH} ${Coverage_LCOV_ARGS}
            --gcov-tool ${GCOV_PATH}
            --remove ${Coverage_NAME}.total ${COVERAGE_LCOV_EXCLUDES}
            --output-file ${PROJECT_BINARY_DIR}/${Coverage_NAME}.info.cleaned
                          # Generate HTML
    COMMAND ${GENHTML_PATH} ${Coverage_GENHTML_ARGS} -o ${Coverage_NAME}
            ${PROJECT_BINARY_DIR}/${Coverage_NAME}.info.cleaned
            # Clean up
    COMMAND ${CMAKE_COMMAND} -E remove ${Coverage_NAME}.base
            ${Coverage_NAME}.total ${PROJECT_BINARY_DIR}/${Coverage_NAME}.info
    WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
    DEPENDS ${Coverage_DEPENDENCIES}
    COMMENT
      "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
    )

  # Show where to find the lcov info report
  add_custom_command(
    TARGET ${Coverage_NAME} POST_BUILD
    COMMAND ;
    COMMENT
      "Lcov code coverage info report saved in ${Coverage_NAME}.info.cleaned")

  # Show info where to find the report
  add_custom_command(
    TARGET ${Coverage_NAME} POST_BUILD
    COMMAND ;
    COMMENT
      "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
    )

endfunction() # SETUP_TARGET_FOR_COVERAGE_LCOV_HTML

# Defines a target for running and collection code coverage information Builds
# dependencies, runs the given executable and outputs reports. NOTE! The
# executable should always have a ZERO as exit code otherwise the coverage
# generation will not complete.
#
# SETUP_TARGET_FOR_COVERAGE_LCOV_TXT( NAME testrunner_coverage # New target name
# EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
# DEPENDENCIES testrunner                     # Dependencies to build first )
function(SETUP_TARGET_FOR_COVERAGE_LCOV_TXT)

  set(options NONE)
  set(oneValueArgs NAME)
  set(multiValueArgs
      EXECUTABLE
      EXECUTABLE_ARGS
      DEPENDENCIES
      LCOV_ARGS
      GENHTML_ARGS)
  cmake_parse_arguments(Coverage
                        "${options}"
                        "${oneValueArgs}"
                        "${multiValueArgs}"
                        ${ARGN})

  if(NOT LCOV_PATH)
    message(FATAL_ERROR "lcov not found! Aborting...")
  endif() # NOT LCOV_PATH

  # Setup target
  add_custom_target(
    ${Coverage_NAME}
    # Run tests
    COMMAND ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
            # Generate coverage.txt for sonar
    COMMAND ${LLVM_PROFDATA_PATH} merge default.profraw -output
            ${Coverage_NAME}.profdata
    COMMAND ${LLVM_COV_PATH} show -instr-profile=${Coverage_NAME}.profdata
            ${CMAKE_CURRENT_BINARY_DIR}/${Coverage_EXECUTABLE} >
            ${Coverage_NAME}.txt
            # Generate HTML
            # Clean up
    COMMAND ${CMAKE_COMMAND} -E remove ${Coverage_NAME}.profdata default.profraw
    WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
    DEPENDS ${Coverage_DEPENDENCIES}
    COMMENT
      "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
    )

  # Show where to find the lcov info report
  add_custom_command(
    TARGET ${Coverage_NAME} POST_BUILD
    COMMAND ;
    COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.txt.")

endfunction() # SETUP_TARGET_FOR_COVERAGE_LCOV_TXT

# Defines a target for running and collection code coverage information Builds
# dependencies, runs the given executable and outputs reports. NOTE! The
# executable should always have a ZERO as exit code otherwise the coverage
# generation will not complete.
#
# SETUP_TARGET_FOR_COVERAGE_GCOVR_XML( NAME ctest_coverage                    #
# New target name EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in
# PROJECT_BINARY_DIR DEPENDENCIES executable_target         # Dependencies to
# build first )
function(SETUP_TARGET_FOR_COVERAGE_GCOVR_XML)

  set(options NONE)
  set(oneValueArgs NAME)
  set(multiValueArgs EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
  cmake_parse_arguments(Coverage
                        "${options}"
                        "${oneValueArgs}"
                        "${multiValueArgs}"
                        ${ARGN})

  if(NOT SIMPLE_PYTHON_EXECUTABLE)
    message(FATAL_ERROR "python not found! Aborting...")
  endif() # NOT SIMPLE_PYTHON_EXECUTABLE

  if(NOT GCOVR_PATH)
    message(FATAL_ERROR "gcovr not found! Aborting...")
  endif() # NOT GCOVR_PATH

  # Combine excludes to several -e arguments
  set(GCOVR_EXCLUDES "")
  foreach(EXCLUDE ${COVERAGE_GCOVR_EXCLUDES})
    list(APPEND GCOVR_EXCLUDES "-e")
    list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
  endforeach()

  add_custom_target(
    ${Coverage_NAME}
    # Run tests
    ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
    # Running gcovr
    COMMAND ${GCOVR_PATH}
            --xml -r ${PROJECT_SOURCE_DIR} ${GCOVR_EXCLUDES}
            --object-directory=${PROJECT_BINARY_DIR} -o ${Coverage_NAME}.xml
    WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
    DEPENDS ${Coverage_DEPENDENCIES}
    COMMENT "Running gcovr to produce Cobertura code coverage report.")

  # Show info where to find the report
  add_custom_command(
    TARGET ${Coverage_NAME} POST_BUILD
    COMMAND ;
    COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml.")

endfunction() # SETUP_TARGET_FOR_COVERAGE_GCOVR_XML

# Defines a target for running and collection code coverage information Builds
# dependencies, runs the given executable and outputs reports. NOTE! The
# executable should always have a ZERO as exit code otherwise the coverage
# generation will not complete.
#
# SETUP_TARGET_FOR_COVERAGE_GCOVR_HTML( NAME ctest_coverage                    #
# New target name EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in
# PROJECT_BINARY_DIR DEPENDENCIES executable_target         # Dependencies to
# build first )
function(SETUP_TARGET_FOR_COVERAGE_GCOVR_HTML)

  set(options NONE)
  set(oneValueArgs NAME)
  set(multiValueArgs EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
  cmake_parse_arguments(Coverage
                        "${options}"
                        "${oneValueArgs}"
                        "${multiValueArgs}"
                        ${ARGN})

  if(NOT SIMPLE_PYTHON_EXECUTABLE)
    message(FATAL_ERROR "python not found! Aborting...")
  endif() # NOT SIMPLE_PYTHON_EXECUTABLE

  if(NOT GCOVR_PATH)
    message(FATAL_ERROR "gcovr not found! Aborting...")
  endif() # NOT GCOVR_PATH

  # Combine excludes to several -e arguments
  set(GCOVR_EXCLUDES "")
  foreach(EXCLUDE ${COVERAGE_GCOVR_EXCLUDES})
    list(APPEND GCOVR_EXCLUDES "-e")
    list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
  endforeach()

  add_custom_target(
    ${Coverage_NAME}
    # Run tests
    ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
    # Create folder
    COMMAND ${CMAKE_COMMAND} -E make_directory
            ${PROJECT_BINARY_DIR}/${Coverage_NAME}
            # Running gcovr
    COMMAND ${GCOVR_PATH}
            --html
            --html-details -r ${PROJECT_SOURCE_DIR} ${GCOVR_EXCLUDES}
            --object-directory=${PROJECT_BINARY_DIR} -o
                                                     ${Coverage_NAME}/index.html
    WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
    DEPENDS ${Coverage_DEPENDENCIES}
    COMMENT "Running gcovr to produce HTML code coverage report.")

  # Show info where to find the report
  add_custom_command(
    TARGET ${Coverage_NAME} POST_BUILD
    COMMAND ;
    COMMENT
      "Open ${CMAKE_CURRENT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report."
    )

endfunction() # SETUP_TARGET_FOR_COVERAGE_GCOVR_HTML

function(APPEND_COVERAGE_COMPILER_FLAGS)
  foreach(_opt ${COVERAGE_COMPILER_FLAGS})
    add_compile_options($<$<COMPILE_LANGUAGE:C>:${_opt}>)
    add_compile_options($<$<COMPILE_LANGUAGE:CXX>:${_opt}>)
  endforeach()
  message(
    STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
endfunction() # APPEND_COVERAGE_COMPILER_FLAGS