Download, parse and display METAR data from the NWS.
icao must be a valid icao for the required location
(see for instance https://pilotweb.nas.faa.gov/qryhtml/icao/).
data_type must be one of the following:
last_update : display the date (yyyy/mm/dd) and time (UTC)
of the last update.
temperature_C : display air temperature in degree Celsius.
temperature_F : display air temperature in degree Fahrenheit.
cloud_cover : display the highest cloud cover status.
pressure : display air pressure in millibar.
wind_speed : display wind speed in km/hour.
wind_dir : display wind direction.
wind_dir_DEG : display compass wind direction.
humidity : display relative humidity in %.
weather : display any relevant weather event (rain, snow, etc.).
delay_in_minutes (optional, default 30) cannot be lower than 30 min.
Up to 3 stations can be simultaneously queried.
Use --enable-weather to compile this in.
Basically, I just added three new process properties (io_read, io_write, io_perc - representing
the amount of I/O done by the process during the update interval) and $top_io, that sorts
processes based on io_perc.
Atm, it's completely #ifdef'd, since it requires kernel support. But that creates some wierd
looking syntax at some places, so it may be better to remove some ifdefs. It even may be
possible to completely remove the ifdefs (ie. convert them to #ifdef linux) since the code will
compile just fine even if the kernel doesn't support I/O accounting. I'll leave that for someone
else to decide.
When you started "$updates|${addr eth0}" displayed "0|No Address",
after the first update you got something normal like "1|192.168.0.1"
This patch should fix this.
Also undid the last change because sony.h was not included, feel free to submit
it again if you include this file and other sourcefiles needed (there is also
no definition of get_sony_fanspeed). If sony systems already have this file and
a definition of this function, please update the configure file so that support
for this is disabled by default and can be enabled by sony owners.
As a side effect, font and colour specific stuff got outsourced, too.
This is because the apropriate functions are used by conky.c as well as
specials.c, so they should be kept on their own.
In the long term I hope for positive impact on the X11 integration mess.
(Take e.g. the mass of X11 ifdefs cluttering conky.c.) Though this
commit contains no optimisations in this direction, just plain
outsourcing, to ensure minimised (intended: none) changes to conky's
interface behaviour.
In fact these two objects share a lot of code, so the bigger plan is to
merge them into a single file to share equal code.
This should not change anything to the code flow, besides making conky
startup a bit more robust due to less use of CRIT_ERR.
Well, not really. I don't dare putting it all together into a single
source file, as that would just not make sense. Instead, this patch
eliminates the --enable-smapi configure option and all related checks,
replacing them with the equivalents from --enable-ibm.
Despite this is actually not much code and could stay inside linux.c as
well, this makes sense as I want to combine smapi and ibm-acpi
functionality. Virtually every user of a notebook made by IBM/Lenovo
will want both, so this should be a feature not a bug.
Besides making the ibm-acpi objects being built optionally, this should
not change anything to the code flow.
* change the height of execbar and execibar to be the same as other
bars have by default (6 pixels)
* treat mixer values as percentages as they're usually 0-100 (switch
to spaced_print() with pad_percents)
* change temp_print() from snprintf() to spaced_print()
* remove decimals from temp_print() as none of the current sources can
supply values smaller than 1 degree (C or F, doesn't matter)
* add a space between number and the unit in human_readable()
* fix number printing in human_readable()
* network $upspeed and $downspeed now use human_readable()
Since there is no choice of which moc player to get information from,
all moc objects' data source can be identical. Also hide some internal
data (the thread e.g.). Since from now on there can only be one moc
thread (not highlander ;), we don't need to treat the thread object
specially.
While here, fix indenting.
Handle mpd internal information inside mpd.c. Use a refcounter to check
if the mpd-information can be freed (maybe useless). Remove the now
useless "full" flag of free_text_objects.
It was a static int before, holding the (already defined) enum's value,
which doesn't make sense. Also it's used only inside conky.c. Since
enums can't be assigned other values than what are defined, we can skip
checking for illegal spacer value at each invocation of spaced_print,
and then also drop the function name argument, which apparently didn't
make sense at all, because use_spacer is a global option.
Instead of splitting information, use diskio_stats[0] in diskio.c for
the totals. This saves a few branches, and frees some data from struct
information.
Some statics are now defined by configure.ac.in, conky.h got a lot
smaller, which I see as a positive sign.
This patch should not change any functionality, just change what's
defined where. Some features I did/could not test are probably broken,
also compiling for any other OS surely won't complete now. Though I
think fixing these problems is as easy as including some missing
headers.
I've done compile checks with the following configure options:
./configure --enable-eve --enable-rss --enable-smapi
--enable-wlan --enable-debug --enable-testing
So what needs to be tested is:
- audacious
- BMPx
- xmms2
- nvidia
The new command line option '-D' ('--debug') increases debugging level by one.
For debugging output a user could be interested in, use the macros DEBUG() and
DEBUG2(). Functionality is equal to the ERR() macro. DEBUG2() prints stuff only
if debugging level is greater one, which means that '--debug' has been
specified more than once. This patch also includes usage of the macros for the
new template object (as debugging syntax errors in templates is one thing a
user potentially needs to do).
git-svn-id: https://conky.svn.sourceforge.net/svnroot/conky/trunk/conky1@1273 7f574dfc-610e-0410-a909-a81674777703
* check only the unique part of the argument
* print temperatures like all others (%.1f)
* do argument parsing in nvidia.c (so all specific stuff is at one place)
* little header cleanup
git-svn-id: https://conky.svn.sourceforge.net/svnroot/conky/trunk/conky1@1231 7f574dfc-610e-0410-a909-a81674777703
