# See README.md for details on doc processing. # # The `desc` field can be formatted with markdown, but please do not include # headings (lines beginning with `#`) in the `desc` field. # # The supported fields are: # # * `name`: the name of the thing # * `desc`: a markdown-formatted description of the thing # * `args`: optional list of arguments # * `default`: an optional default value, if applicable --- desc: |- To configure what Conky displays, you must supply some variables in the `conky.text` section of your configuration. In this secton you'll find a listing of the available variables. Some of them may require build options to be enabled at compile time for them to work. Colours are parsed using `XParseColor()`, there might be a list of them: `/usr/share/X11/rgb.txt`. Colour can be also in `#rrggbb` format (hex). Some objects may create threads, and sometimes these threads will not be destroyed until Conky terminates. There is no way to destroy or clean up threads while Conky is running. For example, if you use an MPD variable, the MPD thread will keep running until Conky dies. Some threaded objects will use one of the parameters as a `key`, so that you only have 1 relevant thread running (for example, the $curl, and $rss objects launch one thread per URI). Optional arguments are generally denoted with paretheses (i.e., `(optional)`). values: - name: acpiacadapter desc: |- ACPI AC adapter state. On linux, the adapter option specifies the subfolder of `/sys/class/power_supply` containing the state information (tries `AC` and `ADP1` if there is no argument given). Non-linux systems ignore it. args: - (adapter) - name: acpifan desc: ACPI fan state. - name: acpitemp desc: ACPI temperature in C. - name: addr desc: |- IP address for an interface, or "No Address" if no address is assigned. args: - (interface) - name: addrs desc: |- IP addresses for an interface (if one - works like addr). Linux only. args: - (interface) - name: adt746xcpu desc: CPU temperature from therm_adt746x. - name: adt746xfan desc: Fan speed from therm_adt746x. - name: alignc desc: Align text to centre. args: - (num) - name: alignr desc: Right-justify text, with space of N. args: - (num) - name: apcupsd desc: |- Sets up the connection to apcupsd daemon. Prints nothing. default: localhost:3551 args: - host - port - name: apcupsd_cable desc: Prints the UPS connection type. - name: apcupsd_charge desc: Current battery capacity in percent. - name: apcupsd_lastxfer desc: Reason for last transfer from line to battery. - name: apcupsd_linev desc: Nominal input voltage. - name: apcupsd_load desc: Current load in percent. - name: apcupsd_loadbar desc: Bar showing current load. - name: apcupsd_loadgauge desc: Gauge that shows current load. args: - (height),(width) - name: apcupsd_loadgraph desc: History graph of current load. args: - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: apcupsd_model desc: Prints the model of the UPS. - name: apcupsd_name desc: Prints the UPS user-defined name. - name: apcupsd_status desc: Prints current status (on-line, on-battery). - name: apcupsd_temp desc: Current internal temperature. - name: apcupsd_timeleft desc: Time left to run on battery. - name: apcupsd_upsmode desc: Prints the UPS mode (e.g. standalone). - name: apm_adapter desc: Display APM AC adapter status. FreeBSD, OpenBSD only. - name: apm_battery_life desc: Display APM battery life in percent. FreeBSD, OpenBSD only. - name: apm_battery_time desc: |- Display remaining APM battery life in hh:mm:ss or "unknown" if AC adapterstatus is on-line or charging. FreeBSD, OpenBSD only. - name: audacious_bar desc: Progress bar. args: - (height),(width) - name: audacious_bitrate desc: Bitrate of current tune. - name: audacious_channels desc: Number of audio channels of current tune. - name: audacious_filename desc: Full path and filename of current tune. - name: audacious_frequency desc: Sampling frequency of current tune. - name: audacious_length desc: Total length of current tune as MM:SS. - name: audacious_length_seconds desc: Total length of current tune in seconds. - name: audacious_main_volume desc: The current volume fetched from Audacious. - name: audacious_playlist_length desc: Number of tunes in playlist. - name: audacious_playlist_position desc: Playlist position of current tune. - name: audacious_position desc: Position of current tune (MM:SS). - name: audacious_position_seconds desc: Position of current tune in seconds. - name: audacious_status desc: Player status (Playing/Paused/Stopped/Not running). - name: audacious_title desc: |- Title of current tune with optional maximum length specifier. args: - (max length) - name: battery desc: |- Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument. default: BAT0 args: - (num) - name: battery_bar desc: |- Battery percentage remaining of ACPI battery in a bar. ACPI battery number can be given as argument (use `all` to get the mean percentage remaining for all batteries). default: BAT0 args: - (height),(width) - (num) - name: battery_percent desc: |- Battery percentage remaining for ACPI battery. ACPI battery number can be given as argument (use `all` to get the mean percentage remaining for all batteries). default: BAT0 args: - (num) - name: battery_power_draw desc: |- Battery power draw in watts default: BAT0 args: - (num) - name: battery_short desc: |- Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument. This mode display a short status, which means that C is displayed instead of charging, D for discharging, F for full, N for not present, E for empty and U for unknown. default: BAT0 args: - (num) - name: battery_status desc: |- Battery status for ACPI battery. ACPI battery number can be given as arguments. default: BAT0 args: - (num) - name: battery_time desc: |- Battery charge/discharge time remaining of ACPI battery. ACPI battery number can be given as argument. default: BAT0 args: - (num) - name: blink desc: Let 'text_and_other_conky_vars' blink on and off. args: - text_and_other_conky_vars - name: buffers desc: Amount of memory buffered. - name: cached desc: Amount of memory cached. - name: cat desc: |- Reads a file and displays the contents in conky. This is useful if you have an independent process generating output that you want to include in conky. args: - file - name: catp desc: |- Reads a file and displays the contents in conky. This is useful if you have an independent process generating output that you want to include in conky. This differs from $cat in that it parses the contents of the file, so you can insert things like `${color red}hi!${color}` in your file and have it correctly parsed by Conky. args: - file - name: cmdline_to_pid desc: PID of the first process that has string in its commandline. args: - string - name: cmus_aaa desc: Print aaa status of cmus (all/artist/album). - name: cmus_album desc: Prints the album of the current cmus song. - name: cmus_artist desc: Prints the artist of the current cmus song. - name: cmus_curtime desc: Current time of the current cmus song. - name: cmus_date desc: Print the date of the current cmus song. - name: cmus_file desc: Print the file name of the current cmus song. - name: cmus_genre desc: Print the genre name of the current cmus song. - name: cmus_percent desc: Percent of song's progress. - name: cmus_progress desc: cmus' progress bar. args: - (height),(width) - name: cmus_random desc: Random status of cmus (on/off). - name: cmus_repeat desc: Repeat status of cmus (song/all/off). - name: cmus_state desc: Current state of cmus (playing, paused, stopped etc). - name: cmus_timeleft desc: Time left of the current cmus song. - name: cmus_title desc: Prints the title of the current cmus song. - name: cmus_totaltime desc: Total length of the current cmus song. - name: cmus_track desc: Print track number of current cmus song. - name: color desc: |- Change drawing color to _color_ which is a name of a color or a hexcode preceded with #, e.g. `#0A1B2C`. If you use ncurses only the following colors are supported: red, green, yellow, blue, magenta, cyan, black, and white. args: - (color) - name: colorN desc: |- Change drawing color to colorN configuration option, where N is a digit between 0 and 9, inclusively. - name: combine desc: |- Places the lines of var2 to the right of the lines of var1 separated by the chars that are put between var1 and var2. For example: `${combine ${head /proc/cpuinfo 2} - ${head /proc/meminfo 1}}` gives as output `cpuinfo_line1 - meminfo_line1` on line 1 and `cpuinfo_line2 -` on line 2. $combine vars can also be nested to place more vars next to each other. args: - var1 - var2 - name: conky_build_arch desc: CPU architecture Conky was built for. - name: conky_build_date desc: Date Conky was built. - name: conky_version desc: Conky version. - name: cpu desc: |- CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu cpuX} (X >= 1) are individual CPUs. args: - (cpuN) - name: cpubar desc: |- Bar that shows CPU usage, height is bar's height in pixels. See $cpu for more info on SMP. args: - (cpuN) - (height),(width) - name: cpugauge desc: |- Elliptical gauge that shows CPU usage, height and width are gauge's vertical and horizontal axis respectively. See $cpu for more info on SMP. args: - (cpuN) - (height),(width) - name: cpugovernor desc: |- The active CPU scaling governor, defaulting to the first core. See $cpu for more info on SMP. Linux only. args: - (cpuN) - name: cpugraph desc: |- CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (cpuN) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: curl desc: |- Download data from URI using Curl at the specified interval. The interval may be a positive floating point value (0 is allowed), otherwise defaults to 15 minutes. Most useful when used in conjunction with Lua and the Lua API. This object is threaded, and once a thread is created it can't be explicitly destroyed. One thread will run for each URI specified. You can use any protocol that Curl supports. args: - url - (interval_in_minutes) - name: desktop desc: |- Number of the desktop on which conky is running or the message "Not running in X" if this is the case. - name: desktop_name desc: |- Name of the desktop on which conky is running or the message "Not running in X" if this is the case. - name: desktop_number desc: |- Number of desktops or the message "Not running in X" if this is the case. - name: disk_protect desc: |- Disk protection status, if supported (needs kernel-patch). Prints either "frozen" or "free " (note the padding). args: - device - name: diskio desc: |- Displays current disk IO. Device is optional, and takes the form of sda for /dev/sda. A block device label can be specified with label:foo and a block device partuuid can be specified with partuuid:40000000-01. args: - (device) - name: diskio_read desc: Displays current disk IO for reads. Device as in diskio. args: - (device) - name: diskio_write desc: Displays current disk IO for writes. Device as in diskio. args: - (device) - name: diskiograph desc: |- Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (device) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: diskiograph_read desc: |- Disk IO graph for reads, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (device) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: diskiograph_write desc: |- Disk IO graph for writes, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (device) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: distribution desc: |- The name of the distribution. It could be that some of the untested distributions will show up wrong or as "unknown", if that's the case post a bug on sourceforge, make sure it contains the name of your distribution, the contents of and if there is a file that only exists on your distribution, also add the path of that file in the bug. If there is no such file, please add another way which we can use to identify your distribution. other: filename: /proc/version - name: downspeed desc: Download speed in suitable IEC units. args: - (net) - name: downspeedf desc: Download speed in KiB with one decimal. args: - (net) - name: downspeedgraph desc: |- Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it defines the maximum value of the graph (in bytes per second). Uses a logarithmic scale (to see small numbers) when you use -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (netdev) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: draft_mails desc: |- Number of mails marked as draft in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: else desc: Text to show if any of the above are not true. - name: endif desc: Ends an $if block. - name: entropy_avail desc: Current entropy available for crypto freaks. - name: entropy_bar desc: Normalized bar of available entropy for crypto freaks. args: - (height),(width) - name: entropy_perc desc: |- Percentage of entropy available in comparison to the poolsize. - name: entropy_poolsize desc: Total size of system entropy pool for crypto freaks. - name: eval desc: |- Evaluates given string according to the rules of conky.text interpretation, i.e. parsing any contained text object specifications into their output, any occurring '$$' into a single '$' and so on. The output is then being parsed again. args: - string - name: exec desc: |- Executes a shell command and displays the output in conky. Warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C/C++ and posting a patch. args: - command - name: execbar desc: |- Same as exec, except if the first value returned is a value between 0-100, it will use that number to draw a horizontal bar. The height and width parameters are optional, and default to the default_bar_height and default_bar_width config settings, respectively. args: - (height),(width) - command - name: execgauge desc: |- Same as exec, except if the first value returned is a value between 0-100, it will use that number to draw a round gauge (much like a vehicle speedometer). The height and width parameters are optional, and default to the default_gauge_height and default_gauge_width config settings, respectively. args: - (height),(width) - command - name: execgraph desc: |- Draws a horizontally scrolling graph with values from 0-100 plotted on the vertical axis. All parameters following the command are optional. Gradient colors can be specified as hexadecimal values with no 0x or # prefix. Use the -t switch to enable a temperature gradient, so that small values are "cold" with color 1 and large values are "hot" with color 2. Without the -t switch, the colors produce a horizontal gradient spanning the width of the graph. The scale parameter defines the maximum value of the graph. Use the -l switch to enable a logarithmic scale, which helps to see small values. The default size for graphs can be controlled via the default_graph_height and default_graph_width config settings. If you need to execute a command with spaces, you have a couple options: 1. wrap your command in double-quotes, or 2. put your command into a separate file, such as ~/bin/myscript.sh, and use that as your execgraph command. Remember to make your script executable! In the following example, we set up execgraph to display seconds (0-59) on a graph that is 50px high and 200px wide, using a temperature gradient with colors ranging from red for small values (FF0000) to yellow for large values (FFFF00). We set the scale to 60. ``` ${execgraph ~/seconds.sh 50,200 FF0000 FFFF00 60 -t} ``` args: - command - (height),(width) - (gradient color 1) - (gradient color 2) - (scale) - (-t) - (-l) - name: execi desc: |- Same as exec, but with a specific interval in seconds. The interval can't be less than the update_interval in your configuration. See also $texeci. args: - interval - command - name: execibar desc: Same as execbar, but with an interval. args: - interval - (height),(width) - command - name: execigauge desc: Same as execgauge, but with an interval. args: - interval - (height),(width) - command - name: execigraph desc: Same as execgraph, but with an interval. args: - interval - command - (height),(width) - (gradient color 1) - (gradient color 2) - (scale) - (-t) - (-l) - name: execp desc: |- Executes a shell command and displays the output in conky. Warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C/C++ and posting a patch. This differs from $exec in that it parses the output of the command, so you can insert things like `${color red}hi!${color}` in your script and have it correctly parsed by Conky. Caveats: Conky parses and evaluates the output of $execp every time Conky loops, and then destroys all the objects. If you try to use anything like $execi within an $execp statement, it will functionally run at the same interval that the $execp statement runs, as it is created and destroyed at every interval. args: - command - name: execpi desc: |- Same as execp, but with an interval. Note that the output from the $execpi command is still parsed and evaluated at every interval. args: - interval - command - name: flagged_mails desc: |- Number of mails marked as flagged in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: font desc: |- Specify a different font. This new font will apply to the current line and everything following. You can use a $font with no arguments to change back to the default font (much like with $color). args: - (font) - name: fontN desc: |- Change font to fontN configuration option, where N is a digit between 0 and 9, inclusively. - name: format_time desc: |- Format time given in seconds. This var only works when the times_in_seconds configuration setting is on. Format is a string that should start and end with a double quote `"` character. The quote characters are not part of the output, \w,\d,\h,\m,\s,\(,\) and \\ are replaced by weeks,days,hours,minutes,seconds,(,) and \. If you leave out a unit, it's value will be expressed in the highest unit lower than the one left out. Text between ()-chars will not be visible if a replaced unit in this text is 0. If seconds is a decimal number then you can see the numbers behind the point by using \S followed by a number that specifies the amount of digits behind the point that you want to see (maximum 9). You can also place a 'x' behind \S so you have all digits behind the point and no trailing zero's. (also maximum 9). args: - seconds - format - name: forwarded_mails desc: |- Number of mails marked as forwarded in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: free_bufcache desc: Amount of memory cached or buffered, as reported by free. Linux only. - name: freq desc: |- Returns CPU #n's frequency in MHz. CPUs are counted from 1. default: 1 args: - (n) - name: freq2 desc: |- Returns CPU #n's clock speed from assembly in MHz. CPUs are counted from 1. default: 1 args: - (n) - name: freq_g desc: |- Returns CPU #n's frequency in GHz. CPUs are counted from 1. default: 1 args: - (n) - name: fs_bar desc: |- Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system. args: - (height),(width) - fs - name: fs_bar_free desc: |- Bar that shows how much space is free on a file system. height is the height in pixels. fs is any file on that file system. args: - (height),(width) - fs - name: fs_free desc: Free space on a file system available for users. args: - (fs) - name: fs_free_perc desc: |- Free percentage of space on a file system available for users. args: - (fs) - name: fs_size desc: File system size. args: - (fs) - name: fs_type desc: File system type. args: - (fs) - name: fs_used desc: File system used space. args: - (fs) - name: fs_used_perc desc: Percent of file system used space. args: - (fs) - name: gid_name desc: Name of group with this gid. args: - gid - name: github_notifications desc: Number of GitHub notifications. - name: goto desc: The next element will be printed at position 'x'. args: - x - name: gw_iface desc: |- Displays the default route's interface or "multiple"/"none" accordingly. - name: gw_ip desc: |- Displays the default gateway's IP or "multiple"/"none" accordingly. - name: hddtemp desc: |- Displays temperature of a selected hard disk drive as reported by the hddtemp daemon. Use hddtemp_host and hddtemp_port to specify a host and port for all hddtemp objects. If no dev parameter is given, the first disk returned by the hddtemp daemon is used. args: - (dev) - name: head desc: |- Displays first N lines of supplied text file. The file is checked every 'next_check' update. If next_check is not supplied, Conky defaults to 2. Max of 30 lines can be displayed, or until the text buffer is filled. args: - logfile - lines - (next_check) - name: hr desc: Horizontal line, height is the height in pixels. args: - (height) - name: hwmon desc: |- Hwmon sensor from sysfs (Linux 2.6). Parameter dev can be: 1. Number. e.g `1` means hwmon1. 2. Module name. e.g. `k10temp` means the first hwmon device whose module name is `k10temp. 3. Omitted. Then the first hwmon device (hwmon0) will be used. Parameter type is either `in` or `vol` meaning voltage; `fan` meaning fan; `temp` meaning temperature. Parameter n is number of the sensor. See `/sys/class/hwmon/` on your local computer. The optional arguments `factor` and `offset` allow precalculation of the raw input, which is being modified as follows: `input = input * factor + offset`. Note that they have to be given as decimal values (i.e. contain at least one decimal place). args: - (dev) - type - n - (factor offset) other: filename: null - name: i2c desc: |- I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one I2C device. Parameter type is either `in` or `vol` meaning voltage; `fan` meaning fan; `temp` meaning temperature. Parameter n is number of the sensor. See `/sys/bus/i2c/devices/` on your local computer. The optional arguments `factor` and `offset` allow precalculation of the raw input, which is being modified as follows: `input = input * factor + offset`. Note that they have to be given as decimal values (i.e. contain at least one decimal place). args: - (dev) - type - n - (factor offset) other: filename: null - name: i8k_ac_status desc: |- If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in `/proc/i8k` (translated to human-readable). Beware that this is by default not enabled by i8k itself. - name: i8k_bios desc: |- If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k. - name: i8k_buttons_status desc: |- If running the i8k kernel driver for Inspiron laptops, displays the volume buttons status as listed in /proc/i8k. - name: i8k_cpu_temp desc: |- If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in Celsius, as reported by /proc/i8k. - name: i8k_left_fan_rpm desc: |- If running the i8k kernel driver for Inspiron laptops, displays the left fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order. - name: i8k_left_fan_status desc: |- If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order. - name: i8k_right_fan_rpm desc: |- If running the i8k kernel driver for Inspiron laptops, displays the right fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order. - name: i8k_right_fan_status desc: |- If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order. - name: i8k_serial desc: |- If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k. - name: i8k_version desc: |- If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k. - name: ibm_brightness desc: |- If running the IBM ACPI, displays the brigtness of the laptops's LCD (0-7). - name: ibm_fan desc: If running the IBM ACPI, displays the fan speed. - name: ibm_temps desc: |- If running the IBM ACPI, displays the temperatures from the IBM temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the GPU. args: - N - name: ibm_thinklight desc: "If running the IBM ACPI, displays the status of your\nThinkLight\u2122. Value\ \ is either 'on', 'off' or 'unknown'." - name: ibm_volume desc: |- If running the IBM ACPI, displays the "master" volume, controlled by the volume keys (0-14). - name: ical desc: |- Shows title of event number 'number' in the ical (RFC 5545) file 'file'. The events are first ordered by starting time, events that started in the past are ignored. The events that are shown are the VEVENTS, the title that is shown is the SUMMARY and the starting time used for sorting is DTSTART. args: - number - file - name: iconv_start desc: |- Convert text from one codeset to another using GNU iconv. Needs to be stopped with iconv_stop. args: - codeset_from - codeset_to - name: iconv_stop desc: Stop iconv codeset conversion. - name: if_empty desc: |- if conky variable VAR is empty, display everything between $if_empty and the matching $endif. args: - (var) - name: if_existing desc: |- if FILE exists, display everything between if_existing and the matching $endif. The optional second parameter checks for FILE containing the specified string and prints everything between $if_existing and the matching $endif. args: - file - (string) - name: if_gw desc: |- if there is at least one default gateway, display everything between $if_gw and the matching $endif. - name: if_match desc: |- Evaluates the given boolean expression, printing everything between $if_match and the matching $endif depending on whether the evaluation returns true or not. Valid expressions consist of a left side, an operator and a right side. Left and right sides are being parsed for contained text objects before evaluation. Recognised left and right side types are: * **double**: Argument consists of only digits and a single dot. * **long**: Argument consists of only digits. * **string**: Argument is enclosed in quotation marks (`"`). Valid operands are: * `<` or `>` * `<=` or `>=` * `==` or `!=` args: - expression - name: if_mixer_mute desc: |- If mixer exists, display everything between $if_mixer_mute and the matching $endif. If no mixer is specified, "Vol" is used. args: - (mixer) - name: if_mounted desc: |- if MOUNTPOINT is mounted, display everything between $if_mounted and the matching $endif. args: - (mountpoint) - name: if_mpd_playing desc: |- if mpd is playing or paused, display everything between $if_mpd_playing and the matching $endif. - name: if_pa_sink_muted desc: |- If Pulseaudio's default sink is muted, display everything between $if_pa_sink_muted and the corresponding $else or $endif. - name: if_running desc: "If PROCESS is running, display everything between\n$if_running and the corresponding\ \ $else or $endif. Note that PROCESS\nmay be either a full command line with arguments\ \ (without the\ndirectory prefix), or simply the name of an executable. For example,\n\ either of the following will be true if there is a running process\nwith the command\ \ line `/usr/bin/conky -u 5`:\n\n* `${if_running conky -u 5}` or\n* `${if_running\ \ conky}`\n \nIt is important not to include trailing spaces. For example,\ \ `${if_running\nconky }` will be false." args: - (process) - name: if_smapi_bat_installed desc: |- when using smapi, if the battery with index INDEX is installed, display everything between $if_smapi_bat_installed and the matching $endif. args: - (INDEX) - name: if_up desc: |- if INTERFACE exists and is up, display everything between $if_up and the matching $endif. args: - (interface) - name: if_updatenr desc: |- If it's the UPDATENR-th time that conky updates, display everything between $if_updatenr and the matching $endif. The counter resets when the highest UPDATENR is reached. Example: `{$if_updatenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr 4}$endif` shows foo 25% of the time followed by bar 25% of the time followed by nothing the other half of the time. args: - (updatenr) - name: if_xmms2_connected desc: |- Display everything between $if_xmms2_connected and the matching $endif if xmms2 is running. - name: iface desc: Display interface names starting from 1, eg ${iface 1}. args: - (number) - name: image desc: |- Renders an image from the path specified using Imlib2. Takes 4 optional arguments: a position, a size, a no-cache switch, and a cache flush interval. Changing the x,y position will move the position of the image, and changing the WxH will scale the image. If you specify the no-cache flag (-n), the image will not be cached. Alternately, you can specify the -f int switch to specify a cache flush interval for a particular image. Example: ${image /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will render 'cheeseburger.jpg' at (20,20) scaled to 200x200 pixels. Conky does not make any attempt to adjust the position (or any other formatting) of images, they are just rendered as per the arguments passed. The only reason $image is part of the conky.text section, is to allow for runtime modifications, through $execp $lua_parse, or some other method. args: - - (-p x,y) - (-s WxH) - (-n) - (-f interval) - name: imap_messages desc: |- Displays the number of messages in your global IMAP inbox by default. You can define individual IMAP inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r retries]". Default port is 143, default folder is 'INBOX', default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts. args: - (args) - name: imap_unseen desc: |- Displays the number of unseen messages in your global IMAP inbox by default. You can define individual IMAP inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r retries]". Default port is 143, default folder is 'INBOX', default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts. args: - (args) - name: intel_backlight desc: Display the brightness of your Intel backlight in percent. - name: ioscheduler desc: |- Prints the current ioscheduler used for the given disk name (i.e. e.g. "hda" or "sdb"). args: - disk - name: irc desc: |- Shows everything that's being told in #channel on IRCserver 'server'. TCP-port 6667 is used for the connection unless 'port' is specified. Shows everything since the last time or the last 'max_msg_lines' entries if specified. args: - server(:port) - "#channel" - (max_msg_lines) - name: journal desc: |- Displays last N lines of the systemd journal. The optional type can be 'user' or 'system' which will show only the user or system journal respectively. By default, all journal lines visible to the user are shown. A maximum of 200 lines can be displayed, or until the text buffer is filled. args: - lines - (type) - name: kernel desc: Kernel version. - name: key_caps_lock desc: An indicator for Capital Lock key. - name: key_num_lock desc: An indicator for Number Lock key. - name: key_scroll_lock desc: An indicator for Scrolling Lock key. - name: keyboard_layout desc: Display keyboard layout. - name: laptop_mode desc: The value of `/proc/sys/vm/laptop_mode`. - name: legacymem desc: Amount of memory used, calculated the same way as in the `free` program. - name: lines desc: Displays the number of lines in the given file. args: - textfile - name: loadavg desc: |- System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes. Without argument, prints all three values separated by whitespace. args: - (1|2|3) - name: loadgraph desc: |- Load1 average graph, similar to xload, with optional colours in hex, minus the #. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: lowercase desc: Converts all letters into lowercase. args: - text - name: lua desc: |- Executes a Lua function with given parameters, then prints the returned string. See also 'lua_load' on how to load scripts. Conky puts 'conky_' in front of function_name to prevent accidental calls to the wrong function unless you place 'conky_' in front of it yourself. args: - function_name - (function parameters) - name: lua_bar desc: |- Executes a Lua function with given parameters and draws a bar. Expects result value to be an integer between 0 and 100. See also 'lua_load' on how to load scripts. Conky puts 'conky_' in front of function_name to prevent accidental calls to the wrong function unless you place 'conky_' in front of it yourself. args: - (height,width) - function_name - (function parameters) - name: lua_gauge desc: |- Executes a Lua function with given parameters and draws a gauge. Expects result value to be an integer between 0 and 100. See also 'lua_load' on how to load scripts. Conky puts 'conky_' in front of function_name to prevent accidental calls to the wrong function unless you place 'conky_' in front of it yourself. args: - (height,width) - function_name - (function parameters) - name: lua_graph desc: |- Executes a Lua function with and draws a graph. Expects result value to be any number, and by default will scale to show the full range. See also 'lua_load' on how to load scripts. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). Conky puts 'conky_' in front of function_name to prevent accidental calls to the wrong function unless you put you place 'conky_' in front of it yourself. args: - function_name - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: lua_parse desc: |- Executes a Lua function with given parameters as per $lua, then parses and prints the result value as per the syntax for the conky.text section. See also 'lua_load' on how to load scripts. Conky puts 'conky_' in front of function_name to prevent accidental calls to the wrong function unless you place 'conky_' in front of it yourself. args: - function_name - (function parameters) - name: machine desc: Machine, e.g. i686, x86_64. - name: mails desc: |- Mail count in the specified mailbox or your mail spool if not. Both mbox and maildir type mailboxes are supported. You can use a program like fetchmail to get mails from some server using your favourite protocol. See also new_mails. args: - (mailbox) - (interval) - name: mboxscan desc: |- Print a summary of recent messages in an mbox format mailbox. mbox parameter is the filename of the mailbox (can be encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"} args: - (-n number of messages to print) - (-fw from width) - (-sw subject width) - mbox - name: mem desc: Amount of memory in use. - name: memactive desc: Amount of active memory. FreeBSD only. - name: memavail desc: Amount of available memory as recorded in /proc/meminfo. Linux 3.14+ only. - name: membar desc: Bar that shows amount of memory in use. args: - (height),(width) - name: memdirty desc: Amount of "dirty" memory. Linux only. - name: memeasyfree desc: |- Amount of free memory including the memory that is very easily freed (buffers/cache). - name: memfree desc: Amount of free memory. - name: memgauge desc: Gauge that shows amount of memory in use (see cpugauge). args: - (height),(width) - name: memgraph desc: |- Memory usage graph. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: meminactive desc: Amount of inactive memory. FreeBSD only. - name: memlaundry desc: Amount of memory in the laundry queue. FreeBSD only. - name: memmax desc: Total amount of memory. - name: memperc desc: Percentage of memory in use. - name: memwired desc: Amount of wired memory. FreeBSD only. - name: memwithbuffers desc: |- Amount of memory in use, including that used by system buffers and caches. - name: memwithbuffersbar desc: |- Bar that shows amount of memory in use (including memory used by system buffers and caches). args: - (height),(width) - name: memwithbuffersgraph desc: |- Memory usage graph including memory used by system buffers and cache. Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: mixer desc: |- Prints the mixer value as reported by the OS. On Linux, this variable uses the OSS emulation, so you need the proper kernel module loaded. Default mixer is "Vol", but you can specify one of the available OSS controls: "Vol", "Bass", "Trebl", "Synth", "Pcm", "Spkr", "Line", "Mic", "CD", "Mix", "Pcm2 ", "Rec", "IGain", "OGain", "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", "PhoneIn", "PhoneOut", "Video", "Radio" and "Monitor". default: Vol args: - (device) - name: mixerbar desc: |- Displays mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments. args: - (device) - name: mixerl desc: |- Prints the left channel mixer value as reported by the OS. See docs for $mixer for details on arguments. args: - (device) - name: mixerlbar desc: |- Displays the left channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments. args: - (device) - name: mixerr desc: |- Prints the right channel mixer value as reported by the OS. See docs for $mixer for details on arguments. args: - (device) - name: mixerrbar desc: |- Displays the right channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments. args: - (device) - name: moc_album desc: Album of the current MOC song. - name: moc_artist desc: Artist of the current MOC song. - name: moc_bitrate desc: Bitrate in the current MOC song. - name: moc_curtime desc: Current time of the current MOC song. - name: moc_file desc: File name of the current MOC song. - name: moc_rate desc: Rate of the current MOC song. - name: moc_song desc: The current song name being played in MOC. - name: moc_state desc: Current state of MOC; playing, stopped etc. - name: moc_timeleft desc: Time left in the current MOC song. - name: moc_title desc: Title of the current MOC song. - name: moc_totaltime desc: Total length of the current MOC song. - name: monitor desc: |- Number of the monitor on which conky is running or the message "Not running in X" if this is the case. - name: monitor_number desc: |- Number of monitors or the message "Not running in X" if this is the case. - name: mouse_speed desc: Display mouse speed. - name: mpd_album desc: Album in current MPD song. - name: mpd_albumartist desc: Artist of the album of the current MPD song. - name: mpd_artist desc: Artist in current MPD song must be enabled at compile. - name: mpd_bar desc: Bar of mpd's progress. args: - (height),(width) - name: mpd_bitrate desc: Bitrate of current song. - name: mpd_comment desc: Comment of current MPD song. args: - (max - length) - name: mpd_date desc: Date of current song. - name: mpd_elapsed desc: Song's elapsed time. - name: mpd_file desc: Prints the file name of the current MPD song. - name: mpd_length desc: Song's length. - name: mpd_name desc: Prints the MPD name field. - name: mpd_percent desc: Percent of song's progress. - name: mpd_random desc: Random status (On/Off). - name: mpd_repeat desc: Repeat status (On/Off). - name: mpd_smart desc: |- Prints the song name in either the form "artist - title" or file name, depending on whats available. args: - (max - length) - name: mpd_status desc: Playing, stopped, et cetera. - name: mpd_title desc: Title of current MPD song. args: - (max - length) - name: mpd_track desc: Prints the MPD track field. - name: mpd_vol desc: MPD's volume. - name: mysql desc: |- Shows the first field of the first row of the result of the query. args: - query - name: nameserver desc: |- Print a nameserver from /etc/resolv.conf. default: 0 args: - (index) - name: new_mails desc: |- Unread mail count in the specified mailbox or mail spool if not. Both mbox and maildir type mailboxes are supported. args: - (mailbox) - (interval) - name: no_update desc: |- Shows text and parses the vars in it, but doesn't update them. Use this for things that do not change while conky is running, like $machine, $conky_version,... By not updating this you can save some resources. args: - text - name: nodename desc: Hostname. - name: nodename_short desc: Short hostname (same as 'hostname -s' shell command). - name: nvidia desc: |- Nvidia graphics card information via the XNVCtrl library. Temperatures are printed as float, all other values as integers. **GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,.. Default parameter is 0 **Possible arguments:** | Argument | Alias | Description | |--------------------|-------------|-----------------------------------------------------------------| | `gputemp` | `temp` | GPU temperature | | `gputempthreshold` | `threshold` | Temperature threshold where the GPU will reduce its clock speed | | `ambienttemp` | `ambient` | Ambient temperature outside the graphics card | | `gpufreqcur` | `gpufreq` | Current GPU clock speed | | `gpufreqmin` | | Minimum GPU clock speed | | `gpufreqmax` | | Maximum GPU clock speed | | `memfreqcur` | `memfreq` | Current memory clock speed | | `memfreqmin` | | Minimum memory clock speed | | `memfreqmax` | | Maximum memory clock speed | | `mtrfreqcur` | `mtrfreq` | Current memory transfer rate clock speed | | `mtrfreqmin` | | Minimum memory transfer rate clock speed | | `mtrfreqmax` | | Maximum memory transfer rate clock speed | | `perflevelcur` | `perflevel` | Current performance level | | `perflevelmin` | | Lowest performance level | | `perflevelmax` | | Highest performance level | | `perfmode` | | Performance mode | | `gpuutil` | | GPU utilization % | | `membwutil` | | Memory bandwidth utilization % | | `videoutil` | | Video engine utilization % | | `pcieutil` | | PCIe bandwidth utilization % | | `memused` | `mem` | Amount of used memory | | `memfree` | `memavail` | Amount of free memory | | `memmax` | `memtotal` | Total amount of memory | | `memutil` | `memperc` | Memory utilization % | | `fanspeed` | | Fan speed | | `fanlevel` | | Fan level % | | `imagequality` | | Image quality | | `modelname` | | Model name of the GPU card | | `driverversion` | | Driver version | args: - argument - (GPU_ID) - name: nvidiabar desc: |- Same as nvidia, except it draws its output in a horizontal bar. The height and width parameters are optional, and default to the default_bar_height and default_bar_width config settings, respectively. **GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,.. Default parameter is 0 **Note the following arguments are** incompatible: * `gputempthreshold` (`threshold`) * `gpufreqmin` * `gpufreqmax` * `memfreqmin` * `memfreqmax` * `mtrfreqmin` * `mtrfreqmax` * `perflevelmin` * `perflevelmax` * `perfmode` * `memtotal` (`memmax`) * `fanspeed` args: - (height),(width) - argument - (GPU_ID) - name: nvidiagauge desc: |- Same as nvidiabar, except a round gauge (much like a vehicle speedometer). The height and width parameters are optional, and default to the default_gauge_height and default_gauge_width config settings, respectively. **GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,.. Default parameter is 0 For possible arguments see nvidia and nvidiabar. args: - (height),(width) - argument - (GPU_ID) - name: nvidiagraph desc: |- Same as nvidiabar, except a horizontally scrolling graph with values from 0-100 plotted on the vertical axis. The height and width parameters are optional, and default to the default_graph_height and default_graph_width config settings, respectively. **GPU_ID:** NOT optional. This parameter allows to choose the GPU to be used as 0,1,2,3,.. For possible arguments see nvidia and nvidiabar. To learn more about the -t -l and gradient color options, see execgraph. args: - argument - (height),(width) - (gradient color 1) - (gradient color 2) - (scale) - (-t) - (-l) - GPU_ID - name: offset desc: Move text over by N pixels. See also $voffset. args: - (pixels) - name: outlinecolor desc: Change outline color. args: - (color) - name: pa_card_active_profile desc: Pulseaudio's default card active profile. - name: pa_card_name desc: Pulseaudio's default card name. - name: pa_sink_active_port_description desc: Pulseaudio's default sink active port description. - name: pa_sink_active_port_name desc: Pulseaudio's default sink active port name. - name: pa_sink_description desc: Pulseaudio's default sink description. - name: pa_sink_volume desc: Pulseaudio's default sink volume percentage. - name: pa_sink_volumebar desc: Pulseaudio's default sink volume bar. - name: password desc: Generate random passwords. args: - (length) - name: pb_battery desc: |- If running on Apple powerbook/ibook, display information on battery status. The item parameter specifies, what information to display. Exactly one item must be specified. Valid items are: | Item | Description | |-----------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | `status` | Display if battery is fully charged, charging, discharging or absent (running on AC) | | `percent` | Display charge of battery in percent, if charging or discharging. Nothing will be displayed, if battery is fully charged or absent. | | `time` | Display the time remaining until the battery will be fully charged or discharged at current rate. Nothing is displayed, if battery is absent or if it's present but fully charged and not discharging. | args: - item - name: pid_chroot desc: |- Directory used as rootdirectory by the process (this will be "/" unless the process did a chroot syscall). args: - pid - name: pid_cmdline desc: Command line this process was invoked with. args: - pid - name: pid_cwd desc: Current working directory of the process. args: - pid - name: pid_egid desc: The effective gid of the process. args: - pid - name: pid_environ desc: Contents of a environment-var of the process. args: - pid - varname - name: pid_environ_list desc: List of environment-vars that the process can see. args: - pid - name: pid_euid desc: The effective uid of the process. args: - pid - name: pid_exe desc: Path to executed command that started the process. args: - pid - name: pid_fsgid desc: The file system gid of the process. args: - pid - name: pid_fsuid desc: The file system uid of the process. args: - pid - name: pid_gid desc: The real gid of the process. args: - pid - name: pid_nice desc: The nice value of the process. args: - pid - name: pid_openfiles desc: List of files that the process has open. args: - pid - name: pid_parent desc: The pid of the parent of the process. args: - pid - name: pid_priority desc: |- The priority of the process (see 'priority' in "man 5 proc"). args: - pid - name: pid_read desc: Total number of bytes read by the process. args: - pid - name: pid_sgid desc: The saved set gid of the process. args: - pid - name: pid_state desc: State of the process. args: - pid - name: pid_state_short desc: |- One of the chars in "RSDZTW" representing the state of the process where R is running, S is sleeping in an interruptible wait, D is waiting in uninterruptible disk sleep, Z is zombie, T is traced or stopped (on a signal), and W is paging. args: - pid - name: pid_stderr desc: Filedescriptor binded to the STDERR of the process. args: - pid - name: pid_stdin desc: Filedescriptor binded to the STDIN of the process. args: - pid - name: pid_stdout desc: Filedescriptor binded to the STDOUT of the process. args: - pid - name: pid_suid desc: The saved set uid of the process. args: - pid - name: pid_thread_list desc: List with pid's from threads from this process. args: - pid - name: pid_threads desc: Number of threads in process containing this thread. args: - pid - name: pid_time desc: Sum of $pid_time_kernelmode and $pid_time_usermode. args: - pid - name: pid_time_kernelmode desc: |- Amount of time that the process has been scheduled in kernel mode in seconds. args: - pid - name: pid_time_usermode desc: |- Amount of time that the process has been scheduled in user mode in seconds. args: - pid - name: pid_uid desc: The real uid of the process. args: - pid - name: pid_vmdata desc: Data segment size of the process. args: - pid - name: pid_vmexe desc: Text segment size of the process. args: - pid - name: pid_vmhwm desc: Peak resident set size ("high water mark") of the process. args: - pid - name: pid_vmlck desc: Locked memory size of the process. args: - pid - name: pid_vmlib desc: Shared library code size of the process. args: - pid - name: pid_vmpeak desc: Peak virtual memory size of the process. args: - pid - name: pid_vmpte desc: Page table entries size of the process. args: - pid - name: pid_vmrss desc: Resident set size of the process. args: - pid - name: pid_vmsize desc: Virtual memory size of the process. args: - pid - name: pid_vmstk desc: Stack segment size of the process. args: - pid - name: pid_write desc: Total number of bytes written by the process. args: - pid - name: platform desc: |- Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one platform device. Platform type is either `in` or `vol` meaning voltage; `fan` meaning fan; `temp` meaning temperature. Parameter n is number of the sensor. See `/sys/bus/platform/devices/` on your local computer. The optional arguments `factor` and `offset` allow precalculation of the raw input, which is being modified as follows: `input = input * factor + offset`. Note that they have to be given as decimal values (i.e. contain at least one decimal place). args: - (dev) - type - n - (factor offset) - name: pop3_unseen desc: |- Displays the number of unseen messages in your global POP3 inbox by default. You can define individual POP3 inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e 'command'] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts. args: - (args) - name: pop3_used desc: |- Displays the amount of space (in MiB, 2^20) used in your global POP3 inbox by default. You can define individual POP3 inboxes separately by passing arguments to this object. Arguments are: "host user pass [-i interval (in seconds)] [-p port] [-e 'command'] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts. args: - (args) - name: processes desc: Total processes (sleeping and running). - name: read_tcp desc: |- Connects to a tcp port on a host (default is localhost), reads every char available at the moment and shows them. args: - (host) - port - name: read_udp desc: |- Connects to a udp port on a host (default is localhost), reads every char available at the moment and shows them. args: - (host) - port - name: replied_mails desc: |- Number of mails marked as replied in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: rss desc: |- Download and parse RSS feeds. The interval may be a (floating point) value greater than 0. Action may be one of the following: feed_title, item_title (with num par), item_desc (with num par) and item_titles (when using this action and spaces_in_front is given conky places that many spaces in front of each item). This object is threaded, and once a thread is created it can't be explicitly destroyed. One thread will run for each URI specified. You can use any protocol that Curl supports. args: - uri - interval_in_seconds - action - (num_par (spaces_in_front)) - name: rstrip desc: Strips all trailing whitespace from input. args: - text - name: running_processes desc: Running processes (not sleeping). Requires Linux 2.6. - name: running_threads desc: Number of running (runnable) threads. Linux only. - name: scroll desc: |- Scroll 'text' by 'step' characters to the left or right (set 'direction' to 'left' or 'right' or 'wait') showing 'length' number of characters at the same time. The text may also contain variables. 'step' is optional and defaults to 1 if not set. 'direction' is optional and defaults to left if not set. When direction is 'wait' then text will scroll left and wait for 'interval' itertations at the beginning and end of the text. If a var creates output on multiple lines then the lines are placed behind each other separated with a '|'-sign. If you change the textcolor inside $scroll it will automatically have it's old value back at the end of $scroll. The end and the start of text will be separated by 'length' number of spaces unless direction is 'wait'. args: - (direction) - length - (step) - (interval) - text - name: seen_mails desc: |- Number of mails marked as seen in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: shadecolor desc: Change shading color. args: - (color) - name: shmem desc: Amount of shared memory. Linux only. - name: sip_status desc: |- Prints info regarding System Integrity Protection (SIP) on macOS. If no switch is provided, prints SIP status (enabled / disabled), else, status of the specific SIP feature corresponding to the switch provided. Below are shown the available switches: | SWITCH | RESULT | STATUS | |--------|-----------------------------|--------| | 0 | apple internal | YES/NO | | 1 | forbid untrusted kexts | YES/NO | | 2 | forbid task-for-pid | YES/NO | | 3 | restrict filesystem | YES/NO | | 4 | forbid kernel-debugger | YES/NO | | 5 | restrict dtrace | YES/NO | | 6 | restrict nvram | YES/NO | | 7 | forbid device-configuration | YES/NO | | 8 | forbid any-recovery-os | YES/NO | | 9 | forbid user-approved-kexts | YES/NO | uses unsupported configuration?: If yes, prints "unsupported configuration, beware!" Else, prints "configuration is ok". USAGE: ``` $ conky -t '${sip_status}' # print SIP status $ conky -t '${sip_status 0}' # print allows apple-internal? Yes or No? ``` NOTES: * Available for all macOS versions (even the ones prior El Capitan where SIP was first introduced) * If run on versions prior El Capitan SIP is unavailable, so all you will get is "unsupported". args: - (switch) - name: smapi desc: |- When using smapi, display contents of the `/sys/devices/platform/smapi` directory. ARGS are either `(FILENAME)` or `bat (INDEX) (FILENAME)` to display the corresponding files' content. This is a very raw method of accessing the smapi values. When available, better use one of the smapi_* variables instead. args: - (ARGS) - name: smapi_bat_bar desc: |- when using smapi, display the remaining capacity of the battery with index INDEX as a bar. args: - (INDEX),(height),(width) - name: smapi_bat_perc desc: |- when using smapi, display the remaining capacity in percent of the battery with index INDEX. This is a separate variable because it supports the 'use_spacer' configuration option. args: - (INDEX) - name: smapi_bat_power desc: |- when using smapi, display the current power of the battery with index INDEX in watt. This is a separate variable because the original read out value is being converted from mW. The sign of the output reflects charging (positive) or discharging (negative) state. args: - INDEX - name: smapi_bat_temp desc: |- when using smapi, display the current temperature of the battery with index INDEX in degree Celsius. This is a separate variable because the original read out value is being converted from milli degree Celsius. args: - INDEX - name: sony_fanspeed desc: |- Displays the Sony VAIO fanspeed information if sony-laptop kernel support is enabled. Linux only. - name: startcase desc: Capitalises the start of each word. args: - text - name: stippled_hr desc: Stippled (dashed) horizontal line. args: - (space) - name: stock desc: |- Displays the data of a stock symbol. The following data is supported: | Name | Description | |-------------|--------------------------------------------| | 1ytp | 1 yr Target Price | | 200ma | 200-day Moving Average | | 50ma | 50-day Moving Average | | 52weekhigh | | | 52weeklow | | | 52weekrange | | | adv | Average Daily Volume | | ag | Annualized Gain | | ahcrt | After Hours Change realtime | | ask | | | askrt | ask realtime | | asksize | | | bid | | | bidrt | bid realtime | | bidsize | | | bookvalue | | | c200ma | Change From 200-day Moving Average | | c50ma | Change From 50-day Moving Average | | c52whigh | Change from 52-week high | | c52wlow | Change From 52-week Low | | change | | | changert | change realtime | | cip | change in percent | | commission | | | cprt | change percent realtime | | dayshigh | | | dayslow | | | dpd | Dividend Pay Date | | dr | day's range | | drrt | day's range realtime | | ds | dividend/share | | dvc | Day's Value Change | | dvcrt | Day's Value Change realtime | | dy | Dividend Yield | | ebitda | | | edv | Ex-Dividend Date | | ei | error indication | | epsecy | EPS Estimate Current Year | | epsenq | EPS Estimate Next Quarter | | epseny | EPS Estimate Next Year | | es | earnings/share | | floatshares | | | hg | Holdings Gain | | hgp | Holdings Gain Percent | | hgprt | Holdings Gain Percent realtime | | hgrt | Holdings Gain realtime | | hl | high limit | | hv | Holdings Value | | hvrt | Holdings Value realtime | | ll | low limit | | ltd | Last Trade Date | | ltp | last trade price | | lts | Last Trade Size | | ltt | Last Trade Time | | mc | Market Capitalization | | mcrt | Market Cap realtime | | moreinfo | | | name | | | notes | | | obrt | Order Book realtime | | open | | | pb | price/book | | pc | previous close | | pc200ma | Percent Change From 200-day Moving Average | | pc50ma | Percent Change From 50-day Moving Average | | pc52whigh | percent change from 52-week high | | pc52wlow | Percent Change From 52-week Low | | pegr | PEG Ratio | | pepsecy | Price/EPS Estimate Current Year | | pepseny | Price/EPS Estimate Next Year | | per | P/E Ratio | | perrt | P/E Ratio realtime | | pricepaid | | | ps | price/sales | | se | Stock Exchange | | sharesowned | | | shortratio | | | symbol | | | tradedate | | | tradelinks | | | tt | Ticker Trend | | volume | | args: - symbol - data - name: swap desc: Amount of swap in use. - name: swapbar desc: Bar that shows amount of swap in use. args: - (height),(width) - name: swapfree desc: Amount of free swap. - name: swapmax desc: Total amount of swap. - name: swapperc desc: Percentage of swap in use. - name: sysctlbyname desc: Print sysctl value by name. FreeBSD only. args: - (name) - name: sysname desc: System name, e.g. Linux. - name: tab desc: |- Puts a tab of the specified width, starting from column 'start'. The unit is pixels for both arguments. args: - (width, (start)) - name: tail desc: |- Displays last N lines of supplied text file. The file is checked every 'next_check' update. If next_check is not supplied, Conky defaults to 2. Max of 30 lines can be displayed, or until the text buffer is filled. args: - logfile - lines - (next_check) - name: tcp_ping desc: |- Displays the number of microseconds it takes to get a reply on a ping to to tcp 'port' on 'host'. 'port' is optional and has 80 as default. This works on both open and closed ports, just make sure that the port is not behind a firewall or you will get 'down' as answer. It's best to test a closed port instead of an open port, you will get a quicker response. args: - host - (port) - name: tcp_portmon desc: |- TCP port (both IPv6 and IPv4) monitor for specified local ports. Port numbers must be in the range 1 to 65535. Valid items are: | Item | Description | |------------|------------------------------------------| | `count` | Total number of connections in the range | | `rip` | Remote ip address | | `rhost` | Remote host name | | `rport` | Remote port number | | `rservice` | Remote service name from `/etc/services` | | `lip` | Local ip address | | `lhost` | Local host name | | `lport` | Local port number | | `lservice` | Local service name from `/etc/services` | The connection index provides you with access to each connection in the port monitor. The monitor will return information for index values from 0 to n-1 connections. Values higher than n-1 are simply ignored. For the `count` item, the connection index must be omitted. It is required for all other items. Examples: | Example | Description | |--------------------------------------|---------------------------------------------------------------------------------------| | `${tcp_portmon 6881 6999 count}` | Displays the number of connections in the bittorrent port range | | `${tcp_portmon 22 22 rip 0}` | Displays the remote host ip of the first sshd connection | | `${tcp_portmon 22 22 rip 9}` | Displays the remote host ip of the tenth sshd connection | | `${tcp_portmon 1 1024 rhost 0}` | Displays the remote host name of the first connection on a privileged port | | `${tcp_portmon 1 1024 rport 4}` | Displays the remote host port of the fifth connection on a privileged port | | `${tcp_portmon 1 65535 lservice 14}` | Displays the local service name of the fifteenth connection in the range of all ports | Note that port monitor variables which share the same port range actually refer to the same monitor, so many references to a single port range for different items and different indexes all use the same monitor internally. In other words, the program avoids creating redundant monitors. args: - port_begin - port_end - item - (index) - name: templateN desc: |- Evaluate the content of the templateN configuration variable (where N is a value between 0 and 9, inclusively), applying substitutions as described in the documentation of the corresponding configuration variable. The number of arguments is optional, but must match the highest referred index in the template. You can use the same special sequences in each argument as the ones valid for a template definition, e.g. to allow an argument to contain a whitespace. Also simple nesting of templates is possible this way. Here are some examples of template definitions, note they are placed between `[[ ... ]]` instead of ` ... `: ```lua template0 = [[$12]] template1 = [[1: ${fs_used 2} / ${fs_size 2}]] template2 = [[1 2]] ``` The following list shows sample usage of the templates defined above, with the equivalent syntax when not using any template at all: | Using template | Same without template | |-----------------------------------------------|--------------------------------------------| | `${template0 node name}` | `$nodename` | | `${template1 root /}` | `root: ${fs_free /} / ${fs_size /}` | | `${template1 ${template2 disk root} /}` | `disk root: ${fs_free /} / ${fs_size /}` | | --------------------------------------------- | ------------------------------------------ | args: - (arg1) - (arg2) - (arg3 ...) - name: texeci desc: |- Runs a command at an interval inside a thread and displays the output. Same as $execi, except the command is run inside a thread. Use this if you have a slow script to keep Conky updating. You should make the interval slightly longer than the time it takes your script to execute. For example, if you have a script that take 5 seconds to execute, you should make the interval at least 6 seconds. See also $execi. This object will clean up the thread when it is destroyed, so it can safely be used in a nested fashion, though it may not produce the desired behaviour if used this way. args: - interval - command - name: texecpi desc: Same as execpi, except the command is run inside a thread. args: - interval - command - name: threads desc: Total threads. - name: time desc: |- Local time, see "man strftime" to get more information about format. args: - (format) - name: to_bytes desc: |- If 'size' is a number followed by a size-unit (kilobyte,mb,GiB,...) then it converts the size to bytes and shows it without unit, otherwise it just shows 'size'. args: - size - name: top desc: |- This takes arguments in the form:top (name) (number) Basically, processes are ranked from highest to lowest in terms of cpu usage, which is what (num) represents. The types are: "name", "pid", "cpu", "mem", "mem_res", "mem_vsize", "time", "uid", "user", "io_perc", "io_read" and "io_write". There can be a max of 10 processes listed. args: - type - num - name: top_io desc: |- Same as top, except sorted by the amount of I/O the process has done during the update interval. args: - type - num - name: top_mem desc: Same as top, except sorted by mem usage instead of cpu. args: - type - num - name: top_time desc: |- Same as top, except sorted by total CPU time instead of current CPU usage. args: - type - num - name: totaldown desc: |- Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before conky has started. args: - (net) - name: totalup desc: Total upload, this one too, may overflow. args: - (net) - name: trashed_mails desc: |- Number of mails marked as trashed in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: tztime desc: |- Local time for specified timezone, see man strftime to get more information about format. The timezone argument is specified in similar fashion as TZ environment variable. For hints, look in /usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc. args: - (timezone (format)) - name: uid_name desc: Username of user with this uid. args: - uid - name: unflagged_mails desc: |- Number of mails not marked as flagged in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: unforwarded_mails desc: |- Number of mails not marked as forwarded in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: unreplied_mails desc: |- Number of mails not marked as replied in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: unseen_mails desc: |- Number of new or unseen mails in the specified mailbox or mail spool if not. Only maildir type mailboxes are supported, mbox type will return -1. args: - (maildir) - (interval) - name: updates desc: for debugging. args: - Number - of - updates - name: uppercase desc: Converts all letters into uppercase. args: - text - name: upspeed desc: Upload speed in suitable IEC units. args: - (net) - name: upspeedf desc: Upload speed in KiB with one decimal. args: - (net) - name: upspeedgraph desc: |- Upload speed graph, colours defined in hex, minus the #. If scale is non-zero, it defines the maximum value of the graph (in bytes per second). Uses a logarithmic scale (to see small numbers) when you use the -l switch. Takes the switch '-t' to use a temperature gradient, which makes the gradient values change depending on the amplitude of a particular graph value (try it and see). args: - (netdev) - (height),(width) - (gradient colour 1) - (gradient colour 2) - (scale) - (-t) - (-l) - name: uptime desc: Uptime. - name: uptime_short desc: Uptime in a shorter format. - name: user_names desc: Lists the names of the users logged in. - name: user_number desc: Number of users logged in. - name: user_terms desc: Lists the consoles in use. - name: user_time desc: |- Lists how long the user for the given console has been logged in for. args: - console - name: user_times desc: Lists how long users have been logged in for. - name: utime desc: Display time in UTC (universal coordinate time). args: - (format) - name: v6addrs desc: |- IPv6 addresses for an interface, followed by netmask if -n is specified and scope with -s. Scopes are Global(G), Host-local(H), Link-local(L), Site-local(S), Compat(C) and Unspecified(/). Linux only. args: - (-n) - (-s) - (interface) - name: version desc: Git version number. DragonFly only. - name: voffset desc: |- Change vertical offset by N pixels. Negative values will cause text to overlap. See also $offset. args: - (pixels) - name: voltage_mv desc: |- Returns CPU #n's voltage in mV. CPUs are counted from 1. default: 1 args: - (n) - name: voltage_v desc: |- Returns CPU #n's voltage in V. CPUs are counted from 1. default: 1 args: - (n) - name: wireless_ap desc: Wireless access point MAC address. Linux only. args: - (net) - name: wireless_bitrate desc: Wireless bitrate (ie 11 Mb/s). Linux only. args: - (net) - name: wireless_channel desc: WLAN channel on which device 'net' is listening. args: - (net) - name: wireless_essid desc: Wireless access point ESSID. Linux only. args: - (net) - name: wireless_freq desc: Frequency on which device 'net' is listening. args: - (net) - name: wireless_link_bar desc: Wireless link quality bar. Linux only. args: - (height),(width) - (net) - name: wireless_link_qual desc: Wireless link quality. Linux only. args: - (net) - name: wireless_link_qual_max desc: Wireless link quality maximum value. Linux only. args: - (net) - name: wireless_link_qual_perc desc: Wireless link quality in percents. Linux only. args: - (net) - name: wireless_mode desc: Wireless mode (Managed/Ad-Hoc/Master). Linux only. args: - (net) - name: words desc: Displays the number of words in the given file. args: - textfile - name: xmms2_album desc: Album in current XMMS2 song. - name: xmms2_artist desc: Artist in current XMMS2 song. - name: xmms2_bar desc: Bar of XMMS2's progress. args: - (height),(width) - name: xmms2_bitrate desc: Bitrate of current song. - name: xmms2_comment desc: Comment in current XMMS2 song. - name: xmms2_date desc: Returns song's date. - name: xmms2_duration desc: Duration of current song. - name: xmms2_elapsed desc: Song's elapsed time. - name: xmms2_genre desc: Genre in current XMMS2 song. - name: xmms2_id desc: XMMS2 id of current song. - name: xmms2_percent desc: Percent of song's progress. - name: xmms2_playlist desc: Returns the XMMS2 playlist. - name: xmms2_size desc: Size of current song. - name: xmms2_smart desc: |- Prints the song name in either the form "artist - title" or file name, depending on whats available. - name: xmms2_status desc: XMMS2 status (Playing, Paused, Stopped, or Disconnected). - name: xmms2_timesplayed desc: Number of times a song was played (presumably). - name: xmms2_title desc: Title in current XMMS2 song. - name: xmms2_tracknr desc: Track number in current XMMS2 song. - name: xmms2_url desc: Full path to current song.