Llewellyn/conky
1
0
Fork 0
mirror of https://github.com/Llewellynvdm/conky.git synced 2024-11-15 09:44:04 +00:00
Code Issues Releases Activity
32f51380a5
conky/doc/variables.yaml
brightkill 32f51380a5 added changes to manpage
2022-10-08 13:21:29 -04:00

2508 lines
89 KiB
YAML
Raw Blame History

# See README.md for details on doc processing.
#
# The `desc` field can be formatted with markdown, but please do not include
# headings (lines beginning with `#`) in the `desc` field.
#
# The supported fields are:
#
# * `name`: the name of the thing
# * `desc`: a markdown-formatted description of the thing
# * `args`: optional list of arguments
# * `default`: an optional default value, if applicable
---
desc: |-
To configure what Conky displays, you must supply some variables in the
`conky.text` section of your configuration. In this secton you'll find a
listing of the available variables. Some of them may require build options to
be enabled at compile time for them to work.
Colours are parsed using `XParseColor()`, there might be a list of them:
`/usr/share/X11/rgb.txt`. Colour can be also in `#rrggbb` format (hex).
Some objects may create threads, and sometimes these threads will not be
destroyed until Conky terminates. There is no way to destroy or clean up
threads while Conky is running. For example, if you use an MPD variable,
the MPD thread will keep running until Conky dies. Some threaded objects
will use one of the parameters as a `key`, so that you only have 1
relevant thread running (for example, the $curl, $rss and $weather
objects launch one thread per URI).
Optional arguments are generally denoted with paretheses (i.e., `(optional)`).
values:
- name: acpiacadapter
desc: |-
ACPI AC adapter state. On linux, the adapter option
specifies the subfolder of `/sys/class/power_supply` containing the state
information (tries `AC` and `ADP1` if there is no argument given).
Non-linux systems ignore it.
args:
- (adapter)
- name: acpifan
desc: ACPI fan state.
- name: acpitemp
desc: ACPI temperature in C.
- name: addr
desc: |-
IP address for an interface, or "No Address" if no address
is assigned.
args:
- (interface)
- name: addrs
desc: |-
IP addresses for an interface (if one - works like addr).
Linux only.
args:
- (interface)
- name: adt746xcpu
desc: CPU temperature from therm_adt746x.
- name: adt746xfan
desc: Fan speed from therm_adt746x.
- name: alignc
desc: Align text to centre.
args:
- (num)
- name: alignr
desc: Right-justify text, with space of N.
args:
- (num)
- name: apcupsd
desc: |-
Sets up the connection to apcupsd daemon. Prints nothing.
default: localhost:3551
args:
- host
- port
- name: apcupsd_cable
desc: Prints the UPS connection type.
- name: apcupsd_charge
desc: Current battery capacity in percent.
- name: apcupsd_lastxfer
desc: Reason for last transfer from line to battery.
- name: apcupsd_linev
desc: Nominal input voltage.
- name: apcupsd_load
desc: Current load in percent.
- name: apcupsd_loadbar
desc: Bar showing current load.
- name: apcupsd_loadgauge
desc: Gauge that shows current load.
args:
- (height),(width)
- name: apcupsd_loadgraph
desc: History graph of current load.
args:
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: apcupsd_model
desc: Prints the model of the UPS.
- name: apcupsd_name
desc: Prints the UPS user-defined name.
- name: apcupsd_status
desc: Prints current status (on-line, on-battery).
- name: apcupsd_temp
desc: Current internal temperature.
- name: apcupsd_timeleft
desc: Time left to run on battery.
- name: apcupsd_upsmode
desc: Prints the UPS mode (e.g. standalone).
- name: apm_adapter
desc: Display APM AC adapter status. FreeBSD, OpenBSD only.
- name: apm_battery_life
desc: Display APM battery life in percent. FreeBSD, OpenBSD only.
- name: apm_battery_time
desc: |-
Display remaining APM battery life in hh:mm:ss or "unknown"
if AC adapterstatus is on-line or charging. FreeBSD, OpenBSD only.
- name: audacious_bar
desc: Progress bar.
args:
- (height),(width)
- name: audacious_bitrate
desc: Bitrate of current tune.
- name: audacious_channels
desc: Number of audio channels of current tune.
- name: audacious_filename
desc: Full path and filename of current tune.
- name: audacious_frequency
desc: Sampling frequency of current tune.
- name: audacious_length
desc: Total length of current tune as MM:SS.
- name: audacious_length_seconds
desc: Total length of current tune in seconds.
- name: audacious_main_volume
desc: The current volume fetched from Audacious.
- name: audacious_playlist_length
desc: Number of tunes in playlist.
- name: audacious_playlist_position
desc: Playlist position of current tune.
- name: audacious_position
desc: Position of current tune (MM:SS).
- name: audacious_position_seconds
desc: Position of current tune in seconds.
- name: audacious_status
desc: Player status (Playing/Paused/Stopped/Not running).
- name: audacious_title
desc: |-
Title of current tune with optional maximum length
specifier.
args:
- (max length)
- name: battery
desc: |-
Battery status and remaining percentage capacity of ACPI or
APM battery. ACPI battery number can be given as argument.
default: BAT0
args:
- (num)
- name: battery_bar
desc: |-
Battery percentage remaining of ACPI battery in a bar. ACPI battery number
can be given as argument (use `all` to get the mean percentage remaining for
all batteries).
default: BAT0
args:
- (height),(width)
- (num)
- name: battery_percent
desc: |-
Battery percentage remaining for ACPI battery. ACPI battery
number can be given as argument (use `all` to get the
mean percentage remaining for all batteries).
default: BAT0
args:
- (num)
- name: battery_power_draw
desc: |-
Battery power draw in watts
default: BAT0
args:
- (num)
- name: battery_short
desc: |-
Battery status and remaining percentage capacity of ACPI or APM battery.
ACPI battery number can be given as argument. This mode display a short
status, which means that C is displayed instead of charging, D for
discharging, F for full, N for not present, E for empty and U for unknown.
default: BAT0
args:
- (num)
- name: battery_status
desc: |-
Battery status for ACPI battery. ACPI battery number can be
given as arguments.
default: BAT0
args:
- (num)
- name: battery_time
desc: |-
Battery charge/discharge time remaining of ACPI battery.
ACPI battery number can be given as argument.
default: BAT0
args:
- (num)
- name: blink
desc: Let 'text_and_other_conky_vars' blink on and off.
args:
- text_and_other_conky_vars
- name: buffers
desc: Amount of memory buffered.
- name: cached
desc: Amount of memory cached.
- name: cat
desc: |-
Reads a file and displays the contents in conky. This is
useful if you have an independent process generating output that you
want to include in conky.
args:
- file
- name: catp
desc: |-
Reads a file and displays the contents in conky. This is
useful if you have an independent process generating output that you
want to include in conky. This differs from $cat in that it parses the
contents of the file, so you can insert things like ${color
red}hi!${color} in your file and have it correctly parsed by Conky.
args:
- file
- name: cmdline_to_pid
desc: PID of the first process that has string in its commandline.
args:
- string
- name: cmus_aaa
desc: Print aaa status of cmus (all/artist/album).
- name: cmus_album
desc: Prints the album of the current cmus song.
- name: cmus_artist
desc: Prints the artist of the current cmus song.
- name: cmus_curtime
desc: Current time of the current cmus song.
- name: cmus_date
desc: Print the date of the current cmus song.
- name: cmus_file
desc: Print the file name of the current cmus song.
- name: cmus_genre
desc: Print the genre name of the current cmus song.
- name: cmus_percent
desc: Percent of song's progress.
- name: cmus_progress
desc: cmus' progress bar.
args:
- (height),(width)
- name: cmus_random
desc: Random status of cmus (on/off).
- name: cmus_repeat
desc: Repeat status of cmus (song/all/off).
- name: cmus_state
desc: Current state of cmus (playing, paused, stopped etc).
- name: cmus_timeleft
desc: Time left of the current cmus song.
- name: cmus_title
desc: Prints the title of the current cmus song.
- name: cmus_totaltime
desc: Total length of the current cmus song.
- name: cmus_track
desc: Print track number of current cmus song.
- name: color
desc: |-
Change drawing color to _color_ which is a name of a color
or a hexcode preceded with #, e.g. `#0A1B2C`. If you use ncurses only
the following colors are supported: red, green, yellow, blue, magenta,
cyan, black, and white.
args:
- (color)
- name: colorN
desc: |-
Change drawing color to colorN configuration option, where N
is a digit between 0 and 9, inclusively.
- name: combine
desc: |-
Places the lines of var2 to the right of the lines of var1
separated by the chars that are put between var1 and var2. For
example: `${combine ${head /proc/cpuinfo 2} - ${head /proc/meminfo 1}}`
gives as output `cpuinfo_line1 - meminfo_line1` on line 1 and
`cpuinfo_line2 -` on line 2. $combine vars can also be nested to place
more vars next to each other.
args:
- var1
- var2
- name: conky_build_arch
desc: CPU architecture Conky was built for.
- name: conky_build_date
desc: Date Conky was built.
- name: conky_version
desc: Conky version.
- name: cpu
desc: |-
CPU usage in percents. For SMP machines, the CPU number can
be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu
cpuX} (X >= 1) are individual CPUs.
args:
- (cpuN)
- name: cpubar
desc: |-
Bar that shows CPU usage, height is bar's height in pixels.
See $cpu for more info on SMP.
args:
- (cpuN)
- (height),(width)
- name: cpugauge
desc: |-
Elliptical gauge that shows CPU usage, height and width are
gauge's vertical and horizontal axis respectively. See $cpu for more
info on SMP.
args:
- (cpuN)
- (height),(width)
- name: cpugovernor
desc: |-
The active CPU scaling governor, defaulting to the first core.
See $cpu for more info on SMP. Linux only.
args:
- (cpuN)
- name: cpugraph
desc: |-
CPU usage graph, with optional colours in hex, minus the #.
See $cpu for more info on SMP. Uses a logarithmic scale (to see small
numbers) when you use the -l switch. Takes the switch '-t' to use a
temperature gradient, which makes the gradient values change depending
on the amplitude of a particular graph value (try it and see).
args:
- (cpuN)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: curl
desc: |-
Download data from URI using Curl at the specified interval.
The interval may be a positive floating point value (0 is allowed),
otherwise defaults to 15 minutes. Most useful when used in conjunction
with Lua and the Lua API. This object is threaded, and once a thread
is created it can't be explicitly destroyed. One thread will run for
each URI specified. You can use any protocol that Curl supports.
args:
- url
- (interval_in_minutes)
- name: desktop
desc: |-
Number of the desktop on which conky is running or the
message "Not running in X" if this is the case.
- name: desktop_name
desc: |-
Name of the desktop on which conky is running or the message
"Not running in X" if this is the case.
- name: desktop_number
desc: |-
Number of desktops or the message "Not running in X" if this
is the case.
- name: disk_protect
desc: |-
Disk protection status, if supported (needs kernel-patch).
Prints either "frozen" or "free " (note the padding).
args:
- device
- name: diskio
desc: |-
Displays current disk IO. Device is optional, and takes the
form of sda for /dev/sda. A block device label can be specified with
label:foo and a block device partuuid can be specified with
partuuid:40000000-01.
args:
- (device)
- name: diskio_read
desc: Displays current disk IO for reads. Device as in diskio.
args:
- (device)
- name: diskio_write
desc: Displays current disk IO for writes. Device as in diskio.
args:
- (device)
- name: diskiograph
desc: |-
Disk IO graph, colours defined in hex, minus the #. If scale
is non-zero, it becomes the scale for the graph. Uses a logarithmic
scale (to see small numbers) when you use -l switch. Takes the switch
'-t' to use a temperature gradient, which makes the gradient values
change depending on the amplitude of a particular graph value (try it
and see).
args:
- (device)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: diskiograph_read
desc: |-
Disk IO graph for reads, colours defined in hex, minus the
#. If scale is non-zero, it becomes the scale for the graph. Device as
in diskio. Uses a logarithmic scale (to see small numbers) when you
use -l switch. Takes the switch '-t' to use a temperature gradient,
which makes the gradient values change depending on the amplitude of a
particular graph value (try it and see).
args:
- (device)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: diskiograph_write
desc: |-
Disk IO graph for writes, colours defined in hex, minus the
#. If scale is non-zero, it becomes the scale for the graph. Device as
in diskio. Uses a logarithmic scale (to see small numbers) when you
use -l switch. Takes the switch '-t' to use a temperature gradient,
which makes the gradient values change depending on the amplitude of a
particular graph value (try it and see).
args:
- (device)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: distribution
desc: |-
The name of the distribution. It could be that some of the
untested distributions will show up wrong or as "unknown", if that's
the case post a bug on sourceforge, make sure it contains the name of
your distribution, the contents of and if there is a file that
only exists on your distribution, also add the path of that file in
the bug. If there is no such file, please add another way which we can
use to identify your distribution.
other:
filename: /proc/version
- name: downspeed
desc: Download speed in suitable IEC units.
args:
- (net)
- name: downspeedf
desc: Download speed in KiB with one decimal.
args:
- (net)
- name: downspeedgraph
desc: |-
Download speed graph, colours defined in hex, minus the #.
If scale is non-zero, it becomes the scale for the graph. Uses a
logarithmic scale (to see small numbers) when you use -l switch. Takes
the switch '-t' to use a temperature gradient, which makes the
gradient values change depending on the amplitude of a particular
graph value (try it and see).
args:
- (netdev)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: draft_mails
desc: |-
Number of mails marked as draft in the specified mailbox or
mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: else
desc: Text to show if any of the above are not true.
- name: endif
desc: Ends an $if block.
- name: entropy_avail
desc: Current entropy available for crypto freaks.
- name: entropy_bar
desc: Normalized bar of available entropy for crypto freaks.
args:
- (height),(width)
- name: entropy_perc
desc: |-
Percentage of entropy available in comparison to the
poolsize.
- name: entropy_poolsize
desc: Total size of system entropy pool for crypto freaks.
- name: eval
desc: |-
Evaluates given string according to the rules of conky.text
interpretation, i.e. parsing any contained text object specifications
into their output, any occurring '$$' into a single '$' and so on. The
output is then being parsed again.
args:
- string
- name: exec
desc: |-
Executes a shell command and displays the output in conky.
Warning: this takes a lot more resources than other variables. I'd
recommend coding wanted behaviour in C/C++ and posting a patch.
args:
- command
- name: execbar
desc: |-
Same as exec, except if the first value returned is a value
between 0-100, it will use that number to draw a horizontal bar. The
height and width parameters are optional, and default to the
default_bar_height and default_bar_width config settings,
respectively.
args:
- (height),(width)
- command
- name: execgauge
desc: |-
Same as exec, except if the first value returned is a value
between 0-100, it will use that number to draw a round gauge (much
like a vehicle speedometer). The height and width parameters are
optional, and default to the default_gauge_height and
default_gauge_width config settings, respectively.
args:
- (height),(width)
- command
- name: execgraph
desc: |-
Draws a horizontally scrolling graph with values from 0-100 plotted on the
vertical axis. All parameters following the command are optional. Gradient
colors can be specified as hexadecimal values with no 0x or # prefix. Use
the -t switch to enable a temperature gradient, so that small values are
"cold" with color 1 and large values are "hot" with color 2. Without the -t
switch, the colors produce a horizontal gradient spanning the width of the
graph. The scale parameter defines the maximum value of the graph. Use the
-l switch to enable a logarithmic scale, which helps to see small values.
The default size for graphs can be controlled via the default_graph_height
and default_graph_width config settings.
If you need to execute a command with spaces, you have a
couple options:
1. wrap your command in double-quotes, or
2. put your command into a separate file, such as ~/bin/myscript.sh, and use
that as your execgraph command.
Remember to make your script executable!
In the following example, we set up execgraph to display seconds (0-59) on a
graph that is 50px high and 200px wide, using a temperature gradient with
colors ranging from red for small values (FF0000) to yellow for large values
(FFFF00). We set the scale to 60.
```
${execgraph ~/seconds.sh 50,200 FF0000 FFFF00 60 -t}
```
args:
- command
- (height),(width)
- (gradient color 1)
- (gradient color 2)
- (scale)
- (-t)
- (-l)
- name: execi
desc: |-
Same as exec, but with a specific interval in seconds. The
interval can't be less than the update_interval in your configuration.
See also $texeci.
args:
- interval
- command
- name: execibar
desc: Same as execbar, but with an interval.
args:
- interval
- (height),(width)
- command
- name: execigauge
desc: Same as execgauge, but with an interval.
args:
- interval
- (height),(width)
- command
- name: execigraph
desc: Same as execgraph, but with an interval.
args:
- interval
- command
- (height),(width)
- (gradient color 1)
- (gradient color 2)
- (scale)
- (-t)
- (-l)
- name: execp
desc: |-
Executes a shell command and displays the output in conky.
Warning: this takes a lot more resources than other variables. I'd
recommend coding wanted behaviour in C/C++ and posting a patch. This
differs from $exec in that it parses the output of the command, so you
can insert things like `${color red}hi!${color}` in your script and have
it correctly parsed by Conky. Caveats: Conky parses and evaluates the
output of $execp every time Conky loops, and then destroys all the
objects. If you try to use anything like $execi within an $execp
statement, it will functionally run at the same interval that the
$execp statement runs, as it is created and destroyed at every
interval.
args:
- command
- name: execpi
desc: |-
Same as execp, but with an interval. Note that the output
from the $execpi command is still parsed and evaluated at every
interval.
args:
- interval
- command
- name: flagged_mails
desc: |-
Number of mails marked as flagged in the specified mailbox
or mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: font
desc: |-
Specify a different font. This new font will apply to the
current line and everything following. You can use a $font with no
arguments to change back to the default font (much like with $color).
args:
- (font)
- name: fontN
desc: |-
Change font to fontN configuration option, where N is a
digit between 0 and 9, inclusively.
- name: format_time
desc: |-
Format time given in seconds. This var only works when the
times_in_seconds configuration setting is on. Format is a string that
should start and end with a double quote `"` character. The quote
characters are not part of the output, \w,\d,\h,\m,\s,\(,\) and \\ are
replaced by weeks,days,hours,minutes,seconds,(,) and \. If you leave out a
unit, it's value will be expressed in the highest unit lower than the one
left out. Text between ()-chars will not be visible if a replaced unit in
this text is 0. If seconds is a decimal number then you can see the
numbers behind the point by using \S followed by a number that specifies
the amount of digits behind the point that you want to see (maximum 9).
You can also place a 'x' behind \S so you have all digits behind the point
and no trailing zero's. (also maximum 9).
args:
- seconds
- format
- name: forwarded_mails
desc: |-
Number of mails marked as forwarded in the specified mailbox
or mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: free_bufcache
desc: Amount of memory cached or buffered, as reported by free. Linux only.
- name: freq
desc: |-
Returns CPU #n's frequency in MHz. CPUs are counted from 1.
default: 1
args:
- (n)
- name: freq2
desc: |-
Returns CPU #n's clock speed from assembly in MHz. CPUs are
counted from 1.
default: 1
args:
- (n)
- name: freq_g
desc: |-
Returns CPU #n's frequency in GHz. CPUs are counted from 1.
default: 1
args:
- (n)
- name: fs_bar
desc: |-
Bar that shows how much space is used on a file system.
height is the height in pixels. fs is any file on that file system.
args:
- (height),(width)
- fs
- name: fs_bar_free
desc: |-
Bar that shows how much space is free on a file system.
height is the height in pixels. fs is any file on that file system.
args:
- (height),(width)
- fs
- name: fs_free
desc: Free space on a file system available for users.
args:
- (fs)
- name: fs_free_perc
desc: |-
Free percentage of space on a file system available for
users.
args:
- (fs)
- name: fs_size
desc: File system size.
args:
- (fs)
- name: fs_type
desc: File system type.
args:
- (fs)
- name: fs_used
desc: File system used space.
args:
- (fs)
- name: fs_used_perc
desc: Percent of file system used space.
args:
- (fs)
- name: gid_name
desc: Name of group with this gid.
args:
- gid
- name: github_notifications
desc: Number of GitHub notifications.
- name: goto
desc: The next element will be printed at position 'x'.
args:
- x
- name: gw_iface
desc: |-
Displays the default route's interface or "multiple"/"none"
accordingly.
- name: gw_ip
desc: |-
Displays the default gateway's IP or "multiple"/"none"
accordingly.
- name: hddtemp
desc: |-
Displays temperature of a selected hard disk drive as
reported by the hddtemp daemon. Use hddtemp_host and hddtemp_port to
specify a host and port for all hddtemp objects. If no dev parameter
is given, the first disk returned by the hddtemp daemon is used.
args:
- (dev)
- name: head
desc: |-
Displays first N lines of supplied text file. The file is
checked every 'next_check' update. If next_check is not supplied,
Conky defaults to 2. Max of 30 lines can be displayed, or until the
text buffer is filled.
args:
- logfile
- lines
- (next_check)
- name: hr
desc: Horizontal line, height is the height in pixels.
args:
- (height)
- name: hwmon
desc: |-
Hwmon sensor from sysfs (Linux 2.6). Parameter dev can be:
1. Number. e.g `1` means hwmon1.
2. Module name. e.g. `k10temp` means the first hwmon device whose module
name is `k10temp.
3. Omitted. Then the first hwmon device (hwmon0) will be used.
Parameter type is either `in` or `vol` meaning voltage; `fan` meaning fan;
`temp` meaning temperature. Parameter n is number of the sensor. See
`/sys/class/hwmon/` on your local computer. The optional arguments `factor`
and `offset` allow precalculation of the raw input, which is being modified
as follows: `input = input * factor + offset`. Note that they have to be
given as decimal values (i.e. contain at least one decimal place).
args:
- (dev)
- type
- n
- (factor offset)
other:
filename: null
- name: i2c
desc: |-
I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have
only one I2C device. Parameter type is either `in` or `vol` meaning voltage;
`fan` meaning fan; `temp` meaning temperature. Parameter n is number of the
sensor. See `/sys/bus/i2c/devices/` on your local computer. The optional
arguments `factor` and `offset` allow precalculation of the raw input, which
is being modified as follows: `input = input * factor + offset`. Note that
they have to be given as decimal values (i.e. contain at least one decimal
place).
args:
- (dev)
- type
- n
- (factor offset)
other:
filename: null
- name: i8k_ac_status
desc: |-
If running the i8k kernel driver for Inspiron laptops, displays whether ac
power is on, as listed in `/proc/i8k` (translated to human-readable). Beware
that this is by default not enabled by i8k itself.
- name: i8k_bios
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the bios version as listed in /proc/i8k.
- name: i8k_buttons_status
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the volume buttons status as listed in /proc/i8k.
- name: i8k_cpu_temp
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the cpu temperature in Celsius, as reported by /proc/i8k.
- name: i8k_left_fan_rpm
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the left fan's rate of rotation, in revolutions per minute as
listed in /proc/i8k. Beware, some laptops i8k reports these fans in
reverse order.
- name: i8k_left_fan_status
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the left fan status as listed in /proc/i8k (translated to
human-readable). Beware, some laptops i8k reports these fans in
reverse order.
- name: i8k_right_fan_rpm
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the right fan's rate of rotation, in revolutions per minute
as listed in /proc/i8k. Beware, some laptops i8k reports these fans in
reverse order.
- name: i8k_right_fan_status
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the right fan status as listed in /proc/i8k (translated to
human-readable). Beware, some laptops i8k reports these fans in
reverse order.
- name: i8k_serial
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays your laptop serial number as listed in /proc/i8k.
- name: i8k_version
desc: |-
If running the i8k kernel driver for Inspiron laptops,
displays the version formatting of /proc/i8k.
- name: ibm_brightness
desc: |-
If running the IBM ACPI, displays the brigtness of the
laptops's LCD (0-7).
- name: ibm_fan
desc: If running the IBM ACPI, displays the fan speed.
- name: ibm_temps
desc: |-
If running the IBM ACPI, displays the temperatures from the
IBM temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the
GPU.
args:
- N
- name: ibm_thinklight
desc:
"If running the IBM ACPI, displays the status of your\nThinkLight\u2122. Value\
\ is either 'on', 'off' or 'unknown'."
- name: ibm_volume
desc: |-
If running the IBM ACPI, displays the "master" volume,
controlled by the volume keys (0-14).
- name: ical
desc: |-
Shows title of event number 'number' in the ical (RFC 5545)
file 'file'. The events are first ordered by starting time, events
that started in the past are ignored. The events that are shown are
the VEVENTS, the title that is shown is the SUMMARY and the starting
time used for sorting is DTSTART.
args:
- number
- file
- name: iconv_start
desc: |-
Convert text from one codeset to another using GNU iconv.
Needs to be stopped with iconv_stop.
args:
- codeset_from
- codeset_to
- name: iconv_stop
desc: Stop iconv codeset conversion.
- name: if_empty
desc: |-
if conky variable VAR is empty, display everything between
$if_empty and the matching $endif.
args:
- (var)
- name: if_existing
desc: |-
if FILE exists, display everything between if_existing and
the matching $endif. The optional second parameter checks for FILE
containing the specified string and prints everything between
$if_existing and the matching $endif.
args:
- file
- (string)
- name: if_gw
desc: |-
if there is at least one default gateway, display everything
between $if_gw and the matching $endif.
- name: if_match
desc: |-
Evaluates the given boolean expression, printing everything
between $if_match and the matching $endif depending on whether the
evaluation returns true or not. Valid expressions consist of a left
side, an operator and a right side. Left and right sides are being
parsed for contained text objects before evaluation.
Recognised left and right side types are:
* **double**: Argument consists of only digits and a single dot.
* **long**: Argument consists of only digits.
* **string**: Argument is enclosed in quotation marks (`"`).
Valid operands are:
* `<` or `>`
* `<=` or `>=`
* `==` or `!=`
args:
- expression
- name: if_mixer_mute
desc: |-
If mixer exists, display everything between $if_mixer_mute
and the matching $endif. If no mixer is specified, "Vol" is used.
args:
- (mixer)
- name: if_mounted
desc: |-
if MOUNTPOINT is mounted, display everything between
$if_mounted and the matching $endif.
args:
- (mountpoint)
- name: if_mpd_playing
desc: |-
if mpd is playing or paused, display everything between
$if_mpd_playing and the matching $endif.
- name: if_pa_sink_muted
desc: |-
If Pulseaudio's default sink is muted, display everything
between $if_pa_sink_muted and the corresponding $else or $endif.
- name: if_running
desc:
"If PROCESS is running, display everything between\n$if_running and the corresponding\
\ $else or $endif. Note that PROCESS\nmay be either a full command line with arguments\
\ (without the\ndirectory prefix), or simply the name of an executable. For example,\n\
either of the following will be true if there is a running process\nwith the command\
\ line `/usr/bin/conky -u 5`:\n\n* `${if_running conky -u 5}` or\n* `${if_running\
\ conky}`\n \nIt is important not to include trailing spaces. For example,\
\ `${if_running\nconky }` will be false."
args:
- (process)
- name: if_smapi_bat_installed
desc: |-
when using smapi, if the battery with index INDEX is
installed, display everything between $if_smapi_bat_installed and the
matching $endif.
args:
- (INDEX)
- name: if_up
desc: |-
if INTERFACE exists and is up, display everything between
$if_up and the matching $endif.
args:
- (interface)
- name: if_updatenr
desc: |-
If it's the UPDATENR-th time that conky updates, display
everything between $if_updatenr and the matching $endif. The counter
resets when the highest UPDATENR is reached.
Example: `{$if_updatenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr
4}$endif` shows foo 25% of the time followed by bar 25% of the time followed
by nothing the other half of the time.
args:
- (updatenr)
- name: if_xmms2_connected
desc: |-
Display everything between $if_xmms2_connected and the
matching $endif if xmms2 is running.
- name: iface
desc: Display interface names starting from 1, eg ${iface 1}.
args:
- (number)
- name: image
desc: |-
Renders an image from the path specified using Imlib2. Takes
4 optional arguments: a position, a size, a no-cache switch, and a
cache flush interval. Changing the x,y position will move the position
of the image, and changing the WxH will scale the image. If you
specify the no-cache flag (-n), the image will not be cached.
Alternately, you can specify the -f int switch to specify a cache
flush interval for a particular image. Example: ${image
/home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will render
'cheeseburger.jpg' at (20,20) scaled to 200x200 pixels. Conky does not
make any attempt to adjust the position (or any other formatting) of
images, they are just rendered as per the arguments passed. The only
reason $image is part of the conky.text section, is to allow for
runtime modifications, through $execp $lua_parse, or some other
method.
args:
- <path to image>
- (-p x,y)
- (-s WxH)
- (-n)
- (-f interval)
- name: imap_messages
desc: |-
Displays the number of messages in your global IMAP inbox by
default. You can define individual IMAP inboxes separately by passing
arguments to this object. Arguments are: "host user pass [-i interval
(in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r retries]".
Default port is 143, default folder is 'INBOX', default interval is 5
minutes, and default number of retries before giving up is 5. If the
password is supplied as '*', you will be prompted to enter the
password when Conky starts.
args:
- (args)
- name: imap_unseen
desc: |-
Displays the number of unseen messages in your global IMAP
inbox by default. You can define individual IMAP inboxes separately by
passing arguments to this object. Arguments are: "host user pass [-i
interval (in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r
retries]". Default port is 143, default folder is 'INBOX', default
interval is 5 minutes, and default number of retries before giving up
is 5. If the password is supplied as '*', you will be prompted to
enter the password when Conky starts.
args:
- (args)
- name: intel_backlight
desc: Display the brightness of your Intel backlight in percent.
- name: ioscheduler
desc: |-
Prints the current ioscheduler used for the given disk name
(i.e. e.g. "hda" or "sdb").
args:
- disk
- name: irc
desc: |-
Shows everything that's being told in #channel on IRCserver
'server'. TCP-port 6667 is used for the connection unless 'port' is
specified. Shows everything since the last time or the last
'max_msg_lines' entries if specified.
args:
- server(:port)
- "#channel"
- (max_msg_lines)
- name: journal
desc: |-
Displays last N lines of the systemd journal. The optional
type can be 'user' or 'system' which will show only the user or system
journal respectively. By default, all journal lines visible to the
user are shown. A maximum of 200 lines can be displayed, or until the
text buffer is filled.
args:
- lines
- (type)
- name: kernel
desc: Kernel version.
- name: key_caps_lock
desc: An indicator for Capital Lock key.
- name: key_num_lock
desc: An indicator for Number Lock key.
- name: key_scroll_lock
desc: An indicator for Scrolling Lock key.
- name: keyboard_layout
desc: Display keyboard layout.
- name: laptop_mode
desc: The value of `/proc/sys/vm/laptop_mode`.
- name: legacymem
desc: Amount of memory used, calculated the same way as in the `free` program.
- name: lines
desc: Displays the number of lines in the given file.
args:
- textfile
- name: loadavg
desc: |-
System load average, 1 is for past 1 minute, 2 for past 5
minutes and 3 for past 15 minutes. Without argument, prints all three
values separated by whitespace.
args:
- (1|2|3)
- name: loadgraph
desc: |-
Load1 average graph, similar to xload, with optional colours
in hex, minus the #. Uses a logarithmic scale (to see small numbers)
when you use the -l switch. Takes the switch '-t' to use a temperature
gradient, which makes the gradient values change depending on the
amplitude of a particular graph value (try it and see).
args:
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: lowercase
desc: Converts all letters into lowercase.
args:
- text
- name: lua
desc: |-
Executes a Lua function with given parameters, then prints
the returned string. See also 'lua_load' on how to load scripts. Conky
puts 'conky_' in front of function_name to prevent accidental calls to
the wrong function unless you place 'conky_' in front of it
yourself.
args:
- function_name
- (function parameters)
- name: lua_bar
desc: |-
Executes a Lua function with given parameters and draws a
bar. Expects result value to be an integer between 0 and 100. See also
'lua_load' on how to load scripts. Conky puts 'conky_' in front of
function_name to prevent accidental calls to the wrong function unless
you place 'conky_' in front of it yourself.
args:
- (height,width)
- function_name
- (function parameters)
- name: lua_gauge
desc: |-
Executes a Lua function with given parameters and draws a
gauge. Expects result value to be an integer between 0 and 100. See
also 'lua_load' on how to load scripts. Conky puts 'conky_' in front
of function_name to prevent accidental calls to the wrong function
unless you place 'conky_' in front of it yourself.
args:
- (height,width)
- function_name
- (function parameters)
- name: lua_graph
desc: |-
Executes a Lua function with and draws a graph. Expects
result value to be any number, and by default will scale to show the
full range. See also 'lua_load' on how to load scripts. Takes the
switch '-t' to use a temperature gradient, which makes the gradient
values change depending on the amplitude of a particular graph value
(try it and see). Conky puts 'conky_' in front of function_name to
prevent accidental calls to the wrong function unless you put you
place 'conky_' in front of it yourself.
args:
- function_name
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: lua_parse
desc: |-
Executes a Lua function with given parameters as per $lua,
then parses and prints the result value as per the syntax for the
conky.text section. See also 'lua_load' on how to load scripts. Conky
puts 'conky_' in front of function_name to prevent accidental calls to
the wrong function unless you place 'conky_' in front of it
yourself.
args:
- function_name
- (function parameters)
- name: machine
desc: Machine, e.g. i686, x86_64.
- name: mails
desc: |-
Mail count in the specified mailbox or your mail spool if
not. Both mbox and maildir type mailboxes are supported. You can use a
program like fetchmail to get mails from some server using your
favourite protocol. See also new_mails.
args:
- (mailbox)
- (interval)
- name: mboxscan
desc: |-
Print a summary of recent messages in an mbox format
mailbox. mbox parameter is the filename of the mailbox (can be
encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}
args:
- (-n number of messages to print)
- (-fw from width)
- (-sw subject width)
- mbox
- name: mem
desc: Amount of memory in use.
- name: memavail
desc: Amount of available memory as recorded in /proc/meminfo. Linux 3.14+ only.
- name: membar
desc: Bar that shows amount of memory in use.
args:
- (height),(width)
- name: memdirty
desc: Amount of "dirty" memory. Linux only.
- name: memeasyfree
desc: |-
Amount of free memory including the memory that is very
easily freed (buffers/cache).
- name: memfree
desc: Amount of free memory.
- name: memgauge
desc: Gauge that shows amount of memory in use (see cpugauge).
args:
- (height),(width)
- name: memgraph
desc: |-
Memory usage graph. Uses a logarithmic scale (to see small
numbers) when you use the -l switch. Takes the switch '-t' to use a
temperature gradient, which makes the gradient values change depending
on the amplitude of a particular graph value (try it and see).
args:
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: memmax
desc: Total amount of memory.
- name: memperc
desc: Percentage of memory in use.
- name: memwithbuffers
desc: |-
Amount of memory in use, including that used by system
buffers and caches.
- name: memwithbuffersbar
desc: |-
Bar that shows amount of memory in use (including memory
used by system buffers and caches).
args:
- (height),(width)
- name: memwithbuffersgraph
desc: |-
Memory usage graph including memory used by system buffers
and cache. Uses a logarithmic scale (to see small numbers) when you
use the -l switch. Takes the switch '-t' to use a temperature
gradient, which makes the gradient values change depending on the
amplitude of a particular graph value (try it and see).
args:
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: mixer
desc: |-
Prints the mixer value as reported by the OS. On Linux, this
variable uses the OSS emulation, so you need the proper kernel module
loaded. Default mixer is "Vol", but you can specify one of the
available OSS controls: "Vol", "Bass", "Trebl", "Synth", "Pcm",
"Spkr", "Line", "Mic", "CD", "Mix", "Pcm2 ", "Rec", "IGain", "OGain",
"Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3",
"PhoneIn", "PhoneOut", "Video", "Radio" and "Monitor".
default: Vol
args:
- (device)
- name: mixerbar
desc: |-
Displays mixer value in a bar as reported by the OS. See
docs for $mixer for details on arguments.
args:
- (device)
- name: mixerl
desc: |-
Prints the left channel mixer value as reported by the OS.
See docs for $mixer for details on arguments.
args:
- (device)
- name: mixerlbar
desc: |-
Displays the left channel mixer value in a bar as reported
by the OS. See docs for $mixer for details on arguments.
args:
- (device)
- name: mixerr
desc: |-
Prints the right channel mixer value as reported by the OS.
See docs for $mixer for details on arguments.
args:
- (device)
- name: mixerrbar
desc: |-
Displays the right channel mixer value in a bar as reported
by the OS. See docs for $mixer for details on arguments.
args:
- (device)
- name: moc_album
desc: Album of the current MOC song.
- name: moc_artist
desc: Artist of the current MOC song.
- name: moc_bitrate
desc: Bitrate in the current MOC song.
- name: moc_curtime
desc: Current time of the current MOC song.
- name: moc_file
desc: File name of the current MOC song.
- name: moc_rate
desc: Rate of the current MOC song.
- name: moc_song
desc: The current song name being played in MOC.
- name: moc_state
desc: Current state of MOC; playing, stopped etc.
- name: moc_timeleft
desc: Time left in the current MOC song.
- name: moc_title
desc: Title of the current MOC song.
- name: moc_totaltime
desc: Total length of the current MOC song.
- name: monitor
desc: |-
Number of the monitor on which conky is running or the
message "Not running in X" if this is the case.
- name: monitor_number
desc: |-
Number of monitors or the message "Not running in X" if this
is the case.
- name: mouse_speed
desc: Display mouse speed.
- name: mpd_album
desc: Album in current MPD song.
- name: mpd_albumartist
desc: Artist of the album of the current MPD song.
- name: mpd_artist
desc: Artist in current MPD song must be enabled at compile.
- name: mpd_bar
desc: Bar of mpd's progress.
args:
- (height),(width)
- name: mpd_bitrate
desc: Bitrate of current song.
- name: mpd_comment
desc: Comment of current MPD song.
args:
- (max
- length)
- name: mpd_date
desc: Date of current song.
- name: mpd_elapsed
desc: Song's elapsed time.
- name: mpd_file
desc: Prints the file name of the current MPD song.
- name: mpd_length
desc: Song's length.
- name: mpd_name
desc: Prints the MPD name field.
- name: mpd_percent
desc: Percent of song's progress.
- name: mpd_random
desc: Random status (On/Off).
- name: mpd_repeat
desc: Repeat status (On/Off).
- name: mpd_smart
desc: |-
Prints the song name in either the form "artist - title" or
file name, depending on whats available.
args:
- (max
- length)
- name: mpd_status
desc: Playing, stopped, et cetera.
- name: mpd_title
desc: Title of current MPD song.
args:
- (max
- length)
- name: mpd_track
desc: Prints the MPD track field.
- name: mpd_vol
desc: MPD's volume.
- name: mysql
desc: |-
Shows the first field of the first row of the result of the
query.
args:
- query
- name: nameserver
desc: |-
Print a nameserver from /etc/resolv.conf.
default: 0
args:
- (index)
- name: new_mails
desc: |-
Unread mail count in the specified mailbox or mail spool if
not. Both mbox and maildir type mailboxes are supported.
args:
- (mailbox)
- (interval)
- name: no_update
desc: |-
Shows text and parses the vars in it, but doesn't update
them. Use this for things that do not change while conky is running,
like $machine, $conky_version,... By not updating this you can save
some resources.
args:
- text
- name: nodename
desc: Hostname.
- name: nodename_short
desc: Short hostname (same as 'hostname -s' shell command).
- name: nvidia
desc: |-
Nvidia graphics card information via the XNVCtrl library.
Temperatures are printed as float, all other values as integers.
**GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,..
Default parameter is 0
**Possible arguments:**
| Argument | Alias | Description |
|--------------------|-------------|-----------------------------------------------------------------|
| `gputemp` | `temp` | GPU temperature |
| `gputempthreshold` | `threshold` | Temperature threshold where the GPU will reduce its clock speed |
| `ambienttemp` | `ambient` | Ambient temperature outside the graphics card |
| `gpufreqcur` | `gpufreq` | Current GPU clock speed |
| `gpufreqmin` | | Minimum GPU clock speed |
| `gpufreqmax` | | Maximum GPU clock speed |
| `memfreqcur` | `memfreq` | Current memory clock speed |
| `memfreqmin` | | Minimum memory clock speed |
| `memfreqmax` | | Maximum memory clock speed |
| `mtrfreqcur` | `mtrfreq` | Current memory transfer rate clock speed |
| `mtrfreqmin` | | Minimum memory transfer rate clock speed |
| `mtrfreqmax` | | Maximum memory transfer rate clock speed |
| `perflevelcur` | `perflevel` | Current performance level |
| `perflevelmin` | | Lowest performance level |
| `perflevelmax` | | Highest performance level |
| `perfmode` | | Performance mode |
| `gpuutil` | | GPU utilization % |
| `membwutil` | | Memory bandwidth utilization % |
| `videoutil` | | Video engine utilization % |
| `pcieutil` | | PCIe bandwidth utilization % |
| `memused` | `mem` | Amount of used memory |
| `memfree` | `memavail` | Amount of free memory |
| `memmax` | `memtotal` | Total amount of memory |
| `memutil` | `memperc` | Memory utilization % |
| `fanspeed` | | Fan speed |
| `fanlevel` | | Fan level % |
| `imagequality` | | Image quality |
| `modelname` | | Model name of the GPU card |
| `driverversion` | | Driver version |
args:
- argument
- (GPU_ID)
- name: nvidiabar
desc: |-
Same as nvidia, except it draws its output in a horizontal bar. The
height and width parameters are optional, and default to the
default_bar_height and default_bar_width config settings,
respectively.
**GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,..
Default parameter is 0
**Note the following arguments are** incompatible:
* `gputempthreshold` (`threshold`)
* `gpufreqmin`
* `gpufreqmax`
* `memfreqmin`
* `memfreqmax`
* `mtrfreqmin`
* `mtrfreqmax`
* `perflevelmin`
* `perflevelmax`
* `perfmode`
* `memtotal` (`memmax`)
* `fanspeed`
args:
- (height),(width)
- argument
- (GPU_ID)
- name: nvidiagauge
desc: |-
Same as nvidiabar, except a round gauge (much like a vehicle
speedometer). The height and width parameters are optional, and
default to the default_gauge_height and default_gauge_width config
settings, respectively.
**GPU_ID:** Optional parameter to choose the GPU to be used as 0,1,2,3,..
Default parameter is 0
For possible arguments see nvidia and nvidiabar.
args:
- (height),(width)
- argument
- (GPU_ID)
- name: nvidiagraph
desc: |-
Same as nvidiabar, except a horizontally scrolling graph with values
from 0-100 plotted on the vertical axis. The height and width
parameters are optional, and default to the default_graph_height and
default_graph_width config settings, respectively.
**GPU_ID:** NOT optional. This parameter allows to choose the GPU to be
used as 0,1,2,3,..
For possible arguments see nvidia and nvidiabar. To learn more about the
-t -l and gradient color options, see execgraph.
args:
- argument
- (height),(width)
- (gradient color 1)
- (gradient color 2)
- (scale)
- (-t)
- (-l)
- GPU_ID
- name: offset
desc: Move text over by N pixels. See also $voffset.
args:
- (pixels)
- name: outlinecolor
desc: Change outline color.
args:
- (color)
- name: pa_card_active_profile
desc: Pulseaudio's default card active profile.
- name: pa_card_name
desc: Pulseaudio's default card name.
- name: pa_sink_active_port_description
desc: Pulseaudio's default sink active port description.
- name: pa_sink_active_port_name
desc: Pulseaudio's default sink active port name.
- name: pa_sink_description
desc: Pulseaudio's default sink description.
- name: pa_sink_volume
desc: Pulseaudio's default sink volume percentage.
- name: pa_sink_volumebar
desc: Pulseaudio's default sink volume bar.
- name: password
desc: Generate random passwords.
args:
- (length)
- name: pb_battery
desc: |-
If running on Apple powerbook/ibook, display information on battery
status. The item parameter specifies, what information to display.
Exactly one item must be specified. Valid items are:
| Item | Description |
|-----------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| `status` | Display if battery is fully charged, charging, discharging or absent (running on AC) |
| `percent` | Display charge of battery in percent, if charging or discharging. Nothing will be displayed, if battery is fully charged or absent. |
| `time` | Display the time remaining until the battery will be fully charged or discharged at current rate. Nothing is displayed, if battery is absent or if it's present but fully charged and not discharging. |
args:
- item
- name: pid_chroot
desc: |-
Directory used as rootdirectory by the process (this will be
"/" unless the process did a chroot syscall).
args:
- pid
- name: pid_cmdline
desc: Command line this process was invoked with.
args:
- pid
- name: pid_cwd
desc: Current working directory of the process.
args:
- pid
- name: pid_egid
desc: The effective gid of the process.
args:
- pid
- name: pid_environ
desc: Contents of a environment-var of the process.
args:
- pid
- varname
- name: pid_environ_list
desc: List of environment-vars that the process can see.
args:
- pid
- name: pid_euid
desc: The effective uid of the process.
args:
- pid
- name: pid_exe
desc: Path to executed command that started the process.
args:
- pid
- name: pid_fsgid
desc: The file system gid of the process.
args:
- pid
- name: pid_fsuid
desc: The file system uid of the process.
args:
- pid
- name: pid_gid
desc: The real gid of the process.
args:
- pid
- name: pid_nice
desc: The nice value of the process.
args:
- pid
- name: pid_openfiles
desc: List of files that the process has open.
args:
- pid
- name: pid_parent
desc: The pid of the parent of the process.
args:
- pid
- name: pid_priority
desc: |-
The priority of the process (see 'priority' in "man 5
proc").
args:
- pid
- name: pid_read
desc: Total number of bytes read by the process.
args:
- pid
- name: pid_sgid
desc: The saved set gid of the process.
args:
- pid
- name: pid_state
desc: State of the process.
args:
- pid
- name: pid_state_short
desc: |-
One of the chars in "RSDZTW" representing the state of the
process where R is running, S is sleeping in an interruptible wait, D
is waiting in uninterruptible disk sleep, Z is zombie, T is traced or
stopped (on a signal), and W is paging.
args:
- pid
- name: pid_stderr
desc: Filedescriptor binded to the STDERR of the process.
args:
- pid
- name: pid_stdin
desc: Filedescriptor binded to the STDIN of the process.
args:
- pid
- name: pid_stdout
desc: Filedescriptor binded to the STDOUT of the process.
args:
- pid
- name: pid_suid
desc: The saved set uid of the process.
args:
- pid
- name: pid_thread_list
desc: List with pid's from threads from this process.
args:
- pid
- name: pid_threads
desc: Number of threads in process containing this thread.
args:
- pid
- name: pid_time
desc: Sum of $pid_time_kernelmode and $pid_time_usermode.
args:
- pid
- name: pid_time_kernelmode
desc: |-
Amount of time that the process has been scheduled in kernel
mode in seconds.
args:
- pid
- name: pid_time_usermode
desc: |-
Amount of time that the process has been scheduled in user
mode in seconds.
args:
- pid
- name: pid_uid
desc: The real uid of the process.
args:
- pid
- name: pid_vmdata
desc: Data segment size of the process.
args:
- pid
- name: pid_vmexe
desc: Text segment size of the process.
args:
- pid
- name: pid_vmhwm
desc: Peak resident set size ("high water mark") of the process.
args:
- pid
- name: pid_vmlck
desc: Locked memory size of the process.
args:
- pid
- name: pid_vmlib
desc: Shared library code size of the process.
args:
- pid
- name: pid_vmpeak
desc: Peak virtual memory size of the process.
args:
- pid
- name: pid_vmpte
desc: Page table entries size of the process.
args:
- pid
- name: pid_vmrss
desc: Resident set size of the process.
args:
- pid
- name: pid_vmsize
desc: Virtual memory size of the process.
args:
- pid
- name: pid_vmstk
desc: Stack segment size of the process.
args:
- pid
- name: pid_write
desc: Total number of bytes written by the process.
args:
- pid
- name: platform
desc: |-
Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you
have only one platform device. Platform type is either `in` or `vol` meaning
voltage; `fan` meaning fan; `temp` meaning temperature. Parameter n is
number of the sensor. See `/sys/bus/platform/devices/` on your local
computer. The optional arguments `factor` and `offset` allow precalculation
of the raw input, which is being modified as follows: `input = input *
factor + offset`. Note that they have to be given as decimal values (i.e.
contain at least one decimal place).
args:
- (dev)
- type
- n
- (factor offset)
- name: pop3_unseen
desc: |-
Displays the number of unseen messages in your global POP3
inbox by default. You can define individual POP3 inboxes separately by
passing arguments to this object. Arguments are: "host user pass [-i
interval (in seconds)] [-p port] [-e 'command'] [-r retries]". Default
port is 110, default interval is 5 minutes, and default number of
retries before giving up is 5. If the password is supplied as '*', you
will be prompted to enter the password when Conky starts.
args:
- (args)
- name: pop3_used
desc: |-
Displays the amount of space (in MiB, 2^20) used in your
global POP3 inbox by default. You can define individual POP3 inboxes
separately by passing arguments to this object. Arguments are: "host
user pass [-i interval (in seconds)] [-p port] [-e 'command'] [-r
retries]". Default port is 110, default interval is 5 minutes, and
default number of retries before giving up is 5. If the password is
supplied as '*', you will be prompted to enter the password when Conky
starts.
args:
- (args)
- name: processes
desc: Total processes (sleeping and running).
- name: read_tcp
desc: |-
Connects to a tcp port on a host (default is localhost),
reads every char available at the moment and shows them.
args:
- (host)
- port
- name: read_udp
desc: |-
Connects to a udp port on a host (default is localhost),
reads every char available at the moment and shows them.
args:
- (host)
- port
- name: replied_mails
desc: |-
Number of mails marked as replied in the specified mailbox
or mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: rss
desc: |-
Download and parse RSS feeds. The interval may be a
(floating point) value greater than 0. Action may be one of the
following: feed_title, item_title (with num par), item_desc (with num
par) and item_titles (when using this action and spaces_in_front is
given conky places that many spaces in front of each item). This
object is threaded, and once a thread is created it can't be
explicitly destroyed. One thread will run for each URI specified. You
can use any protocol that Curl supports.
args:
- uri
- interval_in_seconds
- action
- (num_par (spaces_in_front))
- name: rstrip
desc: Strips all trailing whitespace from input.
args:
- text
- name: running_processes
desc: Running processes (not sleeping). Requires Linux 2.6.
- name: running_threads
desc: Number of running (runnable) threads. Linux only.
- name: scroll
desc: |-
Scroll 'text' by 'step' characters to the left or right (set
'direction' to 'left' or 'right' or 'wait') showing 'length' number of
characters at the same time. The text may also contain variables.
'step' is optional and defaults to 1 if not set. 'direction' is
optional and defaults to left if not set. When direction is 'wait'
then text will scroll left and wait for 'interval' itertations at the
beginning and end of the text. If a var creates output on multiple
lines then the lines are placed behind each other separated with a
'|'-sign. If you change the textcolor inside $scroll it will
automatically have it's old value back at the end of $scroll. The end
and the start of text will be separated by 'length' number of spaces
unless direction is 'wait'.
args:
- (direction)
- length
- (step)
- (interval)
- text
- name: seen_mails
desc: |-
Number of mails marked as seen in the specified mailbox or
mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: shadecolor
desc: Change shading color.
args:
- (color)
- name: shmem
desc: Amount of shared memory. Linux only.
- name: sip_status
desc: |-
Prints info regarding System Integrity Protection (SIP) on
macOS. If no switch is provided, prints SIP status (enabled /
disabled), else, status of the specific SIP feature corresponding to
the switch provided.
Below are shown the available switches:
| SWITCH | RESULT | STATUS |
|--------|-----------------------------|--------|
| 0 | apple internal | YES/NO |
| 1 | forbid untrusted kexts | YES/NO |
| 2 | forbid task-for-pid | YES/NO |
| 3 | restrict filesystem | YES/NO |
| 4 | forbid kernel-debugger | YES/NO |
| 5 | restrict dtrace | YES/NO |
| 6 | restrict nvram | YES/NO |
| 7 | forbid device-configuration | YES/NO |
| 8 | forbid any-recovery-os | YES/NO |
| 9 | forbid user-approved-kexts | YES/NO |
uses unsupported configuration?: If yes, prints "unsupported
configuration, beware!" Else, prints "configuration is ok".
USAGE:
```
$ conky -t '${sip_status}'
# print SIP status
$ conky -t '${sip_status 0}'
# print allows apple-internal? Yes or No?
```
NOTES:
* Available for all macOS versions (even the ones prior El Capitan where
SIP was first introduced)
* If run on versions prior El Capitan SIP is unavailable, so all you will
get is "unsupported".
args:
- (switch)
- name: smapi
desc: |-
When using smapi, display contents of the `/sys/devices/platform/smapi`
directory. ARGS are either `(FILENAME)` or `bat (INDEX) (FILENAME)` to
display the corresponding files' content. This is a very raw method of
accessing the smapi values. When available, better use one of the smapi_*
variables instead.
args:
- (ARGS)
- name: smapi_bat_bar
desc: |-
when using smapi, display the remaining capacity of the
battery with index INDEX as a bar.
args:
- (INDEX),(height),(width)
- name: smapi_bat_perc
desc: |-
when using smapi, display the remaining capacity in percent
of the battery with index INDEX. This is a separate variable because
it supports the 'use_spacer' configuration option.
args:
- (INDEX)
- name: smapi_bat_power
desc: |-
when using smapi, display the current power of the battery
with index INDEX in watt. This is a separate variable because the
original read out value is being converted from mW. The sign of the
output reflects charging (positive) or discharging (negative) state.
args:
- INDEX
- name: smapi_bat_temp
desc: |-
when using smapi, display the current temperature of the
battery with index INDEX in degree Celsius. This is a separate
variable because the original read out value is being converted from
milli degree Celsius.
args:
- INDEX
- name: sony_fanspeed
desc: |-
Displays the Sony VAIO fanspeed information if sony-laptop
kernel support is enabled. Linux only.
- name: startcase
desc: Capitalises the start of each word.
args:
- text
- name: stippled_hr
desc: Stippled (dashed) horizontal line.
args:
- (space)
- name: stock
desc: |-
Displays the data of a stock symbol. The following data is
supported: adv(Average Daily Volume), ask, asksize, bid, askrt(ask
realtime), bidrt(bid realtime), bookvalue, bidsize, change,
commission, changert(change realtime), ahcrt(After Hours Change
realtime), ds(dividend/share), ltd(Last Trade Date), tradedate,
es(earnings/share), ei(error indication), epsecy(EPS Estimate Current
Year), epseny(EPS Estimate Next Year), epsenq(EPS Estimate Next
Quarter), floatshares, dayslow, dayshigh, 52weeklow, 52weekhigh,
hgp(Holdings Gain Percent), ag(Annualized Gain), hg(Holdings Gain),
hgprt(Holdings Gain Percent realtime), hgrt(Holdings Gain realtime),
moreinfo, obrt(Order Book realtime), mc(Market Capitalization),
mcrt(Market Cap realtime), ebitda, c52wlow(Change From 52-week Low),
pc52wlow(Percent Change From 52-week Low), cprt(change percent
realtime), lts(Last Trade Size), c52whigh(Change from 52-week high),
pc52whigh(percent change from 52-week high), ltp(last trade price),
hl(high limit), ll(low limit), dr(day's range), drrt(day's range
realtime), 50ma(50-day Moving Average), 200ma(200-day Moving Average),
c200ma(Change From 200-day Moving Average), pc200ma(Percent Change
From 200-day Moving Average), c50ma(Change From 50-day Moving
Average), pc50ma(Percent Change From 50-day Moving Average), name,
notes, open, pc(previous close), pricepaid, cip(change in percent),
ps(price/sales), pb(price/book), edv(Ex-Dividend Date), per(P/E
Ratio), dpd(Dividend Pay Date), perrt(P/E Ratio realtime), pegr(PEG
Ratio), pepsecy(Price/EPS Estimate Current Year), pepseny(Price/EPS
Estimate Next Year), symbol, sharesowned, shortratio, ltt(Last Trade
Time), tradelinks, tt(Ticker Trend), 1ytp(1 yr Target Price), volume,
hv(Holdings Value), hvrt(Holdings Value realtime), 52weekrange,
dvc(Day's Value Change), dvcrt(Day's Value Change realtime), se(Stock
Exchange), dy(Dividend Yield).
args:
- symbol
- data
- name: swap
desc: Amount of swap in use.
- name: swapbar
desc: Bar that shows amount of swap in use.
args:
- (height),(width)
- name: swapfree
desc: Amount of free swap.
- name: swapmax
desc: Total amount of swap.
- name: swapperc
desc: Percentage of swap in use.
- name: sysctlbyname
desc: Print sysctl value by name. FreeBSD only.
args:
- (name)
- name: sysname
desc: System name, e.g. Linux.
- name: tab
desc: |-
Puts a tab of the specified width, starting from column
'start'. The unit is pixels for both arguments.
args:
- (width, (start))
- name: tail
desc: |-
Displays last N lines of supplied text file. The file is
checked every 'next_check' update. If next_check is not supplied,
Conky defaults to 2. Max of 30 lines can be displayed, or until the
text buffer is filled.
args:
- logfile
- lines
- (next_check)
- name: tcp_ping
desc: |-
Displays the number of microseconds it takes to get a reply
on a ping to to tcp 'port' on 'host'. 'port' is optional and has 80 as
default. This works on both open and closed ports, just make sure that
the port is not behind a firewall or you will get 'down' as answer.
It's best to test a closed port instead of an open port, you will get
a quicker response.
args:
- host
- (port)
- name: tcp_portmon
desc: |-
TCP port (both IPv6 and IPv4) monitor for specified local ports.
Port numbers must be in the range 1 to 65535. Valid items are:
| Item | Description |
|------------|------------------------------------------|
| `count` | Total number of connections in the range |
| `rip` | Remote ip address |
| `rhost` | Remote host name |
| `rport` | Remote port number |
| `rservice` | Remote service name from `/etc/services` |
| `lip` | Local ip address |
| `lhost` | Local host name |
| `lport` | Local port number |
| `lservice` | Local service name from `/etc/services` |
The connection index provides you with access to each connection in the
port monitor. The monitor will return information for index values from
0 to n-1 connections. Values higher than n-1 are simply ignored. For the
`count` item, the connection index must be omitted. It is required for
all other items.
Examples:
| Example | Description |
|--------------------------------------|---------------------------------------------------------------------------------------|
| `${tcp_portmon 6881 6999 count}` | Displays the number of connections in the bittorrent port range |
| `${tcp_portmon 22 22 rip 0}` | Displays the remote host ip of the first sshd connection |
| `${tcp_portmon 22 22 rip 9}` | Displays the remote host ip of the tenth sshd connection |
| `${tcp_portmon 1 1024 rhost 0}` | Displays the remote host name of the first connection on a privileged port |
| `${tcp_portmon 1 1024 rport 4}` | Displays the remote host port of the fifth connection on a privileged port |
| `${tcp_portmon 1 65535 lservice 14}` | Displays the local service name of the fifteenth connection in the range of all ports |
Note that port monitor variables which share the same port range
actually refer to the same monitor, so many references to a single port
range for different items and different indexes all use the same monitor
internally. In other words, the program avoids creating redundant
monitors.
args:
- port_begin
- port_end
- item
- (index)
- name: templateN
desc: |-
Evaluate the content of the templateN configuration variable (where
N is a value between 0 and 9, inclusively), applying substitutions
as described in the documentation of the corresponding configuration
variable. The number of arguments is optional, but must match the
highest referred index in the template. You can use the same special
sequences in each argument as the ones valid for a template
definition, e.g. to allow an argument to contain a whitespace. Also
simple nesting of templates is possible this way.
Here are some examples of template definitions, note they are placed
between \[\[ \... \]\] instead of \' \... \':
template0 = \[\[\$\\1\\2\]\]\
template1 = \[\[\\1: \${fs_used \\2} / \${fs_size \\2}\]\]\
template2 = \[\[\\1 \\2\]\]
The following list shows sample usage of the templates defined above,
with the equivalent syntax when not using any template at all:
--------------------------------------------- ------------------------------------------
using template same without template
\${template0 node name} \$nodename
\${template1 root /} root: \${fs_free /} / \${fs_size /}
\${template1 \${template2\\ disk\\ root} /} disk root: \${fs_free /} / \${fs_size /}
--------------------------------------------- ------------------------------------------
args:
- (arg1)
- (arg2)
- (arg3 ...)
- name: texeci
desc: |-
Runs a command at an interval inside a thread and displays
the output. Same as $execi, except the command is run inside a thread.
Use this if you have a slow script to keep Conky updating. You should
make the interval slightly longer than the time it takes your script
to execute. For example, if you have a script that take 5 seconds to
execute, you should make the interval at least 6 seconds. See also
$execi. This object will clean up the thread when it is destroyed, so
it can safely be used in a nested fashion, though it may not produce
the desired behaviour if used this way.
args:
- interval
- command
- name: texecpi
desc: Same as execpi, except the command is run inside a thread.
args:
- interval
- command
- name: threads
desc: Total threads.
- name: time
desc: |-
Local time, see "man strftime" to get more information about
format.
args:
- (format)
- name: to_bytes
desc: |-
If 'size' is a number followed by a size-unit
(kilobyte,mb,GiB,...) then it converts the size to bytes and shows it
without unit, otherwise it just shows 'size'.
args:
- size
- name: top
desc: |-
This takes arguments in the form:top (name) (number)
Basically, processes are ranked from highest to lowest in terms of cpu
usage, which is what (num) represents. The types are: "name", "pid",
"cpu", "mem", "mem_res", "mem_vsize", "time", "uid", "user",
"io_perc", "io_read" and "io_write". There can be a max of 10
processes listed.
args:
- type
- num
- name: top_io
desc: |-
Same as top, except sorted by the amount of I/O the process
has done during the update interval.
args:
- type
- num
- name: top_mem
desc: Same as top, except sorted by mem usage instead of cpu.
args:
- type
- num
- name: top_time
desc: |-
Same as top, except sorted by total CPU time instead of
current CPU usage.
args:
- type
- num
- name: totaldown
desc: |-
Total download, overflows at 4 GB on Linux with 32-bit arch
and there doesn't seem to be a way to know how many times it has
already done that before conky has started.
args:
- (net)
- name: totalup
desc: Total upload, this one too, may overflow.
args:
- (net)
- name: trashed_mails
desc: |-
Number of mails marked as trashed in the specified mailbox
or mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: tztime
desc: |-
Local time for specified timezone, see man strftime to get
more information about format. The timezone argument is specified in
similar fashion as TZ environment variable. For hints, look in
/usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc.
args:
- (timezone
- (format))
- name: uid_name
desc: Username of user with this uid.
args:
- uid
- name: unflagged_mails
desc: |-
Number of mails not marked as flagged in the specified
mailbox or mail spool if not. Only maildir type mailboxes are
supported, mbox type will return -1.
args:
- (maildir)
- (interval)
- name: unforwarded_mails
desc: |-
Number of mails not marked as forwarded in the specified
mailbox or mail spool if not. Only maildir type mailboxes are
supported, mbox type will return -1.
args:
- (maildir)
- (interval)
- name: unreplied_mails
desc: |-
Number of mails not marked as replied in the specified
mailbox or mail spool if not. Only maildir type mailboxes are
supported, mbox type will return -1.
args:
- (maildir)
- (interval)
- name: unseen_mails
desc: |-
Number of new or unseen mails in the specified mailbox or
mail spool if not. Only maildir type mailboxes are supported, mbox
type will return -1.
args:
- (maildir)
- (interval)
- name: updates
desc: for debugging.
args:
- Number
- of
- updates
- name: uppercase
desc: Converts all letters into uppercase.
args:
- text
- name: upspeed
desc: Upload speed in suitable IEC units.
args:
- (net)
- name: upspeedf
desc: Upload speed in KiB with one decimal.
args:
- (net)
- name: upspeedgraph
desc: |-
Upload speed graph, colours defined in hex, minus the #. If
scale is non-zero, it becomes the scale for the graph. Uses a
logarithmic scale (to see small numbers) when you use the -l switch.
Takes the switch '-t' to use a temperature gradient, which makes the
gradient values change depending on the amplitude of a particular
graph value (try it and see).
args:
- (netdev)
- (height),(width)
- (gradient colour 1)
- (gradient colour 2)
- (scale)
- (-t)
- (-l)
- name: uptime
desc: Uptime.
- name: uptime_short
desc: Uptime in a shorter format.
- name: user_names
desc: Lists the names of the users logged in.
- name: user_number
desc: Number of users logged in.
- name: user_terms
desc: Lists the consoles in use.
- name: user_time
desc: |-
Lists how long the user for the given console has been
logged in for.
args:
- console
- name: user_times
desc: Lists how long users have been logged in for.
- name: utime
desc: Display time in UTC (universal coordinate time).
args:
- (format)
- name: v6addrs
desc: |-
IPv6 addresses for an interface, followed by netmask if -n
is specified and scope with -s. Scopes are Global(G), Host-local(H),
Link-local(L), Site-local(S), Compat(C) and Unspecified(/). Linux
only.
args:
- (-n)
- (-s)
- (interface)
- name: version
desc: Git version number. DragonFly only.
- name: voffset
desc: |-
Change vertical offset by N pixels. Negative values will
cause text to overlap. See also $offset.
args:
- (pixels)
- name: voltage_mv
desc: |-
Returns CPU #n's voltage in mV. CPUs are counted from 1.
default: 1
args:
- (n)
- name: voltage_v
desc: |-
Returns CPU #n's voltage in V. CPUs are counted from 1.
default: 1
args:
- (n)
- name: weather
desc: |-
This feature is currently unimplemented.
Download, parse and display METAR data.
\'URI\' must be a valid METAR URI.
http://tgftp.nws.noaa.gov/data/observations/metar/stations/
\'locID\' must be a valid location identifier for the required uri. For
the NOAA site this must be a valid ICAO (see for instance
*https://pilotweb.nas.faa.gov/qryhtml/icao/*). For the weather.com site
this must be a valid location ID (see for instance
*http://aspnetresources.com/tools/locid.aspx*).
\'data_type\' must be one of the following:
**last_update** The date and time stamp of the data. The result depends
on the URI used. For the NOAA site it is date (yyyy/mm/dd) and UTC time.
For the weather.com one it is date (\[m\]m/\[d\]d/yy) and Local Time of
the station.\
**temperature**
Air temperature (you can use the \'temperature_unit\' config setting to
change units)\
**cloud_cover**
The highest cloud cover status\
**pressure**
Air pressure in millibar\
**wind_speed**
Wind speed in km/h\
**wind_dir**
Wind direction\
**wind_dir_DEG**
Compass wind direction\
**humidity**
Relative humidity in %\
**weather**
Any relevant weather event (rain, snow, etc.). This is not used if you
are querying the weather.com site since this data is aggregated into the
cloud_cover one\
**icon**
Weather icon (only for www.weather.com). Can be used together with the
icon kit provided upon registering to their service.
\'delay_in_minutes\' (optional, default 30) cannot be less than 30
minutes.
This object is threaded, and once a thread is created it can\'t be
explicitly destroyed. One thread will run for each URI specified.
Note that these variables are still EXPERIMENTAL and can be subject to
many future changes.
args:
- URI
- locID
- data_type
- (interval_in_minutes)
- name: weather_forecast
desc: |-
This feature is currently unimplemented.
Download, parse and display weather forecast data for a given day
(daytime only).
\'locID\', see \'weather\' above.
\'day\' is a number from 0 (today) to 4 (3 days after tomorrow).
\'data_type\' must be one of the following:
**day** **Day of the week**\
**date** **Date, in the form MMM DD (ie. Jul 14)**\
**low** **Minimum temperature (you can use the** \'temperature_unit\'
config setting to change units)\
**hi** **Maximum temperature (you can use the** \'temperature_unit\'
config setting to change units)\
**icon** **Weather icon. Can be used together with the icon** kit
provided upon registering to the weather.com service\
**forecast** **Weather forecast (sunny, rainy, etc.)**\
**wind_speed** **Wind speed in km/h**\
**wind_dir** **Wind direction**\
**wind_dir_DEG** **Compass wind direction**\
**humidity** **Relative humidity in %**\
**precipitation** **Probability of having a precipitation (in** %)
\'delay_in_minutes\' (optional, default 210) cannot be lower than 210
min.
This object is threaded, and once a thread is created it can\'t be
explicitly destroyed. One thread will run for each URI specified. You
can use any protocol that Curl supports.
Note that these variables are still EXPERIMENTAL and can be subject to
many future changes.
args:
- URI
- locID
- day
- data_type
- (interval_in_minutes)
- name: wireless_ap
desc: Wireless access point MAC address. Linux only.
args:
- (net)
- name: wireless_bitrate
desc: Wireless bitrate (ie 11 Mb/s). Linux only.
args:
- (net)
- name: wireless_channel
desc: WLAN channel on which device 'net' is listening.
args:
- (net)
- name: wireless_essid
desc: Wireless access point ESSID. Linux only.
args:
- (net)
- name: wireless_freq
desc: Frequency on which device 'net' is listening.
args:
- (net)
- name: wireless_link_bar
desc: Wireless link quality bar. Linux only.
args:
- (height),(width)
- (net)
- name: wireless_link_qual
desc: Wireless link quality. Linux only.
args:
- (net)
- name: wireless_link_qual_max
desc: Wireless link quality maximum value. Linux only.
args:
- (net)
- name: wireless_link_qual_perc
desc: Wireless link quality in percents. Linux only.
args:
- (net)
- name: wireless_mode
desc: Wireless mode (Managed/Ad-Hoc/Master). Linux only.
args:
- (net)
- name: words
desc: Displays the number of words in the given file.
args:
- textfile
- name: xmms2_album
desc: Album in current XMMS2 song.
- name: xmms2_artist
desc: Artist in current XMMS2 song.
- name: xmms2_bar
desc: Bar of XMMS2's progress.
args:
- (height),(width)
- name: xmms2_bitrate
desc: Bitrate of current song.
- name: xmms2_comment
desc: Comment in current XMMS2 song.
- name: xmms2_date
desc: Returns song's date.
- name: xmms2_duration
desc: Duration of current song.
- name: xmms2_elapsed
desc: Song's elapsed time.
- name: xmms2_genre
desc: Genre in current XMMS2 song.
- name: xmms2_id
desc: XMMS2 id of current song.
- name: xmms2_percent
desc: Percent of song's progress.
- name: xmms2_playlist
desc: Returns the XMMS2 playlist.
- name: xmms2_size
desc: Size of current song.
- name: xmms2_smart
desc: |-
Prints the song name in either the form "artist - title" or
file name, depending on whats available.
- name: xmms2_status
desc: XMMS2 status (Playing, Paused, Stopped, or Disconnected).
- name: xmms2_timesplayed
desc: Number of times a song was played (presumably).
- name: xmms2_title
desc: Title in current XMMS2 song.
- name: xmms2_tracknr
desc: Track number in current XMMS2 song.
- name: xmms2_url
desc: Full path to current song.
View Git Blame Copy Permalink