Llewellyn/conky
1
0
Fork 0
mirror of https://github.com/Llewellynvdm/conky.git synced 2024-12-27 04:32:55 +00:00
Code Issues Releases Activity
a5486b0339
conky/doc/variables.xml
Brenden Matthews 5080b30a50 conky 1.3.3 
git-svn-id: https://conky.svn.sourceforge.net/svnroot/conky/trunk/conky@350 7f574dfc-610e-0410-a909-a81674777703
2005-10-18 00:28:23 +00:00

1156 lines
26 KiB
XML
Raw Blame History

<variablelist>
<varlistentry>
<term>
<command><option>addr</option></command>
<option>interface</option>
</term>
<listitem>
IP address for an interface
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>acpiacadapter</option></command>
</term>
<listitem>
ACPI ac adapter state.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>acpifan</option></command>
</term>
<listitem>
ACPI fan state
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>acpitemp</option></command>
</term>
<listitem>
ACPI temperature in C.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>acpitempf</option></command>
</term>
<listitem>
ACPI temperature in F.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>adt746xcpu</option></command>
</term>
<listitem>
CPU temperature from therm_adt746x
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>adt746xfan</option></command>
</term>
<listitem>
Fan speed from therm_adt746x
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>alignr</option></command>
<option>(num)</option>
</term>
<listitem>
Right-justify text, with space of N
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>alignc</option></command>
<option>(num)</option>
</term>
<listitem>
Align text to centre
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>apm_adapter</option></command>
</term>
<listitem>
Display APM AC adapter status (FreeBSD only)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>apm_battery_life</option></command>
</term>
<listitem>
Display APM battery life in percent (FreeBSD only)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>apm_battery_time</option></command>
</term>
<listitem>
Display remaining APM battery life in hh:mm:ss or "unknown" if
AC adapterstatus is on-line or charging (FreeBSD only)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>battery</option></command>
<option>(num)</option>
</term>
<listitem>
Remaining capacity in ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0).
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>buffers</option></command>
</term>
<listitem>
Amount of memory buffered
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>cached</option></command>
</term>
<listitem>
Amount of memory cached
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>color</option></command>
<option>(color)</option>
</term>
<listitem>
Change drawing color to color
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>cpu</option></command>
<option>(cpuN)</option>
</term>
<listitem>
CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. cpu0 is the total usage, and >=cpu1 are individual CPUs.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>cpubar</option></command>
<option>(cpu number) (height),(width)</option>
</term>
<listitem>
Bar that shows CPU usage, height is bar's height in pixels. See $cpu for more info on SMP.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>cpugraph</option></command>
<option>(cpu number) (height),(width) (gradient colour 1) (gradient colour 2)</option>
</term>
<listitem>
CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>diskio</option></command>
</term>
<listitem>
Displays current disk IO.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>diskiograph</option></command>
<option>(height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
</term>
<listitem>
Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>downspeed</option></command>
<option>net</option>
</term>
<listitem>
Download speed in kilobytes
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>downspeedf</option></command>
<option>net</option>
</term>
<listitem>
Download speed in kilobytes with one decimal
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>downspeedgraph</option></command>
<option>net (height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
</term>
<listitem>
Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>else</option></command>
</term>
<listitem>
Text to show if any of the above are not true
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>exec</option></command>
<option>command</option>
</term>
<listitem>
Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execbar</option></command>
<option>command</option>
</term>
<listitem>
Same as exec, except if the first value return is a value between 0-100, it will use that number for a bar. The size for the bar is currently fixed, but that may change in the future.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execgraph</option></command>
<option>command</option>
</term>
<listitem>
Same as execbar, but graphs values.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execi</option></command>
<option>interval command</option>
</term>
<listitem>
Same as exec but with specific interval. Interval can't be less than update_interval in configuration. See also $texeci
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execibar</option></command>
<option>interval command</option>
</term>
<listitem>
Same as execbar, except with an interval
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>execigraph</option></command>
<option>interval command</option>
</term>
<listitem>
Same as execigraph, but takes an interval arg graphs values
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>font</option></command>
<option>font</option>
</term>
<listitem>
Specify a different font. Only applies to one line.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>freq</option></command>
</term>
<listitem>
Returns CPU frequency in MHz
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>freq_g</option></command>
</term>
<listitem>
Returns CPU frequency in GHz
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>freq_dyn</option></command>
</term>
<listitem>
Returns CPU frequency in MHz, but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>freq_dyn_g</option></command>
</term>
<listitem>
Returns CPU frequency in GHz, but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>fs_bar</option></command>
<option>(height),(width) fs</option>
</term>
<listitem>
Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>fs_free</option></command>
<option>(fs)</option>
</term>
<listitem>
Free space on a file system available for users.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>fs_free_perc</option></command>
<option>(fs)</option>
</term>
<listitem>
Free percentage of space on a file system available for users.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>fs_size</option></command>
<option>(fs)</option>
</term>
<listitem>
File system size
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>fs_used</option></command>
<option>(fs)</option>
</term>
<listitem>
File system used space
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>head</option></command>
<option>logfile lines (interval)</option>
</term>
<listitem>
Displays first N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>hr</option></command>
<option>(height)</option>
</term>
<listitem>
Horizontal line, height is the height in pixels
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i2c</option></command>
<option>(dev), type, n</option>
</term>
<listitem>
I2C sensor from sysfs (Linux 2.6). dev may be omitted if you have only one I2C device. type is either in (or vol) meaning voltage, fan meaning fan or temp/tempf (first in C, second in F) meaning temperature. n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_ac_status</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in /proc/i8k (translated to human-readable). Beware that this is by default not enabled by i8k itself.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_bios</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_buttons_status</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the volume buttons status as listed in /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_cpu_temp</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in celsius, as reported by /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_cpu_tempf</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in farenheit, as reported by /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_left_fan_rpm</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the left fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_left_fan_status</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_right_fan_rpm</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the right fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_right_fan_status</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_serial</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>i8k_version</option></command>
<option></option>
</term>
<listitem>
If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>if_running</option></command>
<option>(process)</option>
</term>
<listitem>
if PROCESS is running, display everything if_running and the matching $endif
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>if_existing</option></command>
<option>(file)</option>
</term>
<listitem>
if FILE exists, display everything between if_existing and the matching $endif
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>if_mounted</option></command>
<option>(mountpoint)</option>
</term>
<listitem>
if MOUNTPOINT is mounted, display everything between if_mounted and the matching $endif
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>kernel</option></command>
</term>
<listitem>
Kernel version
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>linkstatus</option></command>
<option>interface</option>
</term>
<listitem>
Get the link status for wireless connections
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>loadavg</option></command>
</term>
<listitem>
(1,2,3)> System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>machine</option></command>
</term>
<listitem>
Machine, i686 for example
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mails</option></command>
</term>
<listitem>
Mail count in mail spool. You can use program like fetchmail to get mails from some server using your favourite protocol. See also new_mails.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mem</option></command>
</term>
<listitem>
Amount of memory in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>membar</option></command>
<option>(height),(width)</option>
</term>
<listitem>
Bar that shows amount of memory in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>memmax</option></command>
</term>
<listitem>
Total amount of memory
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>memperc</option></command>
</term>
<listitem>
Percentage of memory in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_upload_counter</option></command>
</term>
<listitem>
total session upload in mb
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_download_counter</option></command>
</term>
<listitem>
total session download in mb
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_nshared_files</option></command>
</term>
<listitem>
number of shared files
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_shared_counter</option></command>
</term>
<listitem>
total session shared in mb, buggy in some mldonkey versions
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_tcp_upload_rate</option></command>
</term>
<listitem>
tcp upload rate in kb/s
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_tcp_download_rate</option></command>
</term>
<listitem>
tcp download rate in kb/s
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_udp_upload_rate</option></command>
</term>
<listitem>
udp upload rate in kb/s
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_udp_download_rate</option></command>
</term>
<listitem>
udp download rate in kb/s
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_ndownloaded_files</option></command>
</term>
<listitem>
number of completed files
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>ml_ndownloading_files</option></command>
</term>
<listitem>
number of downloading files
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_artist</option></command>
</term>
<listitem>
Artist in current MPD song must be enabled at compile
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_album</option></command>
</term>
<listitem>
Album in current MPD song
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_bar</option></command>
<option>(height),(width)</option>
</term>
<listitem>
Bar of mpd's progress
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_bitrate</option></command>
</term>
<listitem>
Bitrate of current song
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_status</option></command>
</term>
<listitem>
Playing, stopped, et cetera.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_title</option></command>
</term>
<listitem>
Title of current MPD song
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_vol</option></command>
</term>
<listitem>
MPD's volume
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_elapsed</option></command>
</term>
<listitem>
Song's elapsed time
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_length</option></command>
</term>
<listitem>
Song's length
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_percent</option></command>
</term>
<listitem>
Percent of song's progress
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_random</option></command>
</term>
<listitem>
Random status (On/Off)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_repeat</option></command>
</term>
<listitem>
Repeat status (On/Off)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>mpd_track</option></command>
</term>
<listitem>
Prints the MPD track field
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>new_mails</option></command>
</term>
<listitem>
Unread mail count in mail spool.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>nodename</option></command>
</term>
<listitem>
Hostname
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>outlinecolor</option></command>
<option>(color)</option>
</term>
<listitem>
Change outline color
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>pre_exec</option></command>
<option>shell command</option>
</term>
<listitem>
Executes a shell command one time before conky displays anything and puts output as text.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>processes</option></command>
</term>
<listitem>
Total processes (sleeping and running)
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>running_processes</option></command>
</term>
<listitem>
Running processes (not sleeping), requires Linux 2.6
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>shadecolor</option></command>
<option>(color)</option>
</term>
<listitem>
Change shading color
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>stippled_hr</option></command>
<option>(space)</option>
</term>
<listitem>
Stippled (dashed) horizontal line
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>swapbar</option></command>
<option>(height),(width)</option>
</term>
<listitem>
Bar that shows amount of swap in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>swap</option></command>
</term>
<listitem>
Amount of swap in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>swapmax</option></command>
</term>
<listitem>
Total amount of swap
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>swapperc</option></command>
</term>
<listitem>
Percentage of swap in use
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>sysname</option></command>
</term>
<listitem>
System name, Linux for example
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>texeci</option></command>
<option>interval command</option>
</term>
<listitem>
Runs a command at an interval inside a thread and displays the output. Same as $execi, except the command is run inside a thread. Use this if you have a slow script to keep Conky updating. You should make the interval slightly longer then the time it takes your script to execute. For example, if you have a script that take 5 seconds to execute, you should make the interval at least 6 seconds. See also $execi.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>offset</option></command>
<option>(pixels)</option>
</term>
<listitem>
Move text over by N pixels. See also $voffset.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>tail</option></command>
<option>logfile lines (interval)</option>
</term>
<listitem>
Displays last N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>time</option></command>
<option>(format)</option>
</term>
<listitem>
Local time, see man strftime to get more information about format
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>totaldown</option></command>
<option>net</option>
</term>
<listitem>
Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before conky has started.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>top</option></command>
<option>type, num</option>
</term>
<listitem>
This takes arguments in the form:top (name) (number) Basically, processes are ranked from highest to lowest in terms of cpu usage, which is what (num) represents. The types are: "name", "pid", "cpu", and mem". There can be a max of 10 processes listed.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>top_mem</option></command>
<option>type, num</option>
</term>
<listitem>
Same as top, except sorted by mem usage instead of cpu
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>totalup</option></command>
<option>net</option>
</term>
<listitem>
Total upload, this one too, may overflow
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>updates</option></command>
<option>Number of updates</option>
</term>
<listitem>
for debugging
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>upspeed</option></command>
<option>net</option>
</term>
<listitem>
Upload speed in kilobytes
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>upspeedf</option></command>
<option>net</option>
</term>
<listitem>
Upload speed in kilobytes with one decimal
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>upspeedgraph</option></command>
<option>net (height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
</term>
<listitem>
Upload speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph.
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>uptime</option></command>
</term>
<listitem>
Uptime
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>uptime_short</option></command>
</term>
<listitem>
Uptime in a shorter format
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>seti_prog</option></command>
</term>
<listitem>
Seti@home current progress
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>seti_progbar</option></command>
<option>(height),(width)</option>
</term>
<listitem>
Seti@home current progress bar
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>seti_credit</option></command>
</term>
<listitem>
Seti@home total user credit
<para></para></listitem>
</varlistentry>
<varlistentry>
<term>
<command><option>voffset</option></command>
<option>(pixels)</option>
</term>
<listitem>
Change verticle offset by N pixels. Negative values will cause text to overlap. See also $offset.
<para></para></listitem>
</varlistentry>
</variablelist>
View Git Blame Copy Permalink