conky/doc/variables.yaml

# See README.md for details on doc processing.
#
# The `desc` field can be formatted with markdown, but please do not include
# headings (lines beginning with `#`) in the `desc` field.
#
# The supported fields are:
#
#  * `name`: the name of the thing
#  * `desc`: a markdown-formatted description of the thing
#  * `args`: optional list of arguments
#  * `default`: an optional default value, if applicable
---
desc: |-
  To configure what Conky displays, you must supply some variables in the
  `conky.text` section of your configuration. In this secton you'll find a
  listing of the available variables. Some of them may require build options to
  be enabled at compile time for them to work.

  Colours are parsed using XParsecolor(), there might be a list of them:
  `/usr/share/X11/rgb.txt`. Colour can be also in `#rrggbb` format (hex).

  Some objects may create threads, and sometimes these threads will not be
  destroyed until Conky terminates. There is no way to destroy or clean up
  threads while Conky is running. For example, if you use an MPD variable,
  the MPD thread will keep running until Conky dies. Some threaded objects
  will use one of the parameters as a `key`, so that you only have 1
  relevant thread running (for example, the $curl, $rss and $weather
  objects launch one thread per URI).  
values:
  - name: acpiacadapter
    desc: |-
      ACPI AC adapter state. On linux, the adapter option
      specifies the subfolder of `/sys/class/power_supply` containing the state
      information (tries `AC` and `ADP1` if there is no argument given).
      Non-linux systems ignore it.      
    args:
      - (adapter)
  - name: acpifan
    desc: ACPI fan state.
  - name: acpitemp
    desc: ACPI temperature in C.
  - name: addr
    desc: |-
      IP address for an interface, or "No Address" if no address
      is assigned.      
    args:
      - (interface)
  - name: addrs
    desc: |-
      IP addresses for an interface (if one - works like addr).
      Linux only.      
    args:
      - (interface)
  - name: adt746xcpu
    desc: CPU temperature from therm_adt746x.
  - name: adt746xfan
    desc: Fan speed from therm_adt746x.
  - name: alignc
    desc: Align text to centre.
    args:
      - (num)
  - name: alignr
    desc: Right-justify text, with space of N.
    args:
      - (num)
  - name: apcupsd
    desc: |-
      Sets up the connection to apcupsd daemon. Prints nothing.      
    default: localhost:3551
    args:
      - host
      - port
  - name: apcupsd_cable
    desc: Prints the UPS connection type.
  - name: apcupsd_charge
    desc: Current battery capacity in percent.
  - name: apcupsd_lastxfer
    desc: Reason for last transfer from line to battery.
  - name: apcupsd_linev
    desc: Nominal input voltage.
  - name: apcupsd_load
    desc: Current load in percent.
  - name: apcupsd_loadbar
    desc: Bar showing current load.
  - name: apcupsd_loadgauge
    desc: Gauge that shows current load.
    args:
      - (height),(width)
  - name: apcupsd_loadgraph
    desc: History graph of current load.
    args:
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: apcupsd_model
    desc: Prints the model of the UPS.
  - name: apcupsd_name
    desc: Prints the UPS user-defined name.
  - name: apcupsd_status
    desc: Prints current status (on-line, on-battery).
  - name: apcupsd_temp
    desc: Current internal temperature.
  - name: apcupsd_timeleft
    desc: Time left to run on battery.
  - name: apcupsd_upsmode
    desc: Prints the UPS mode (e.g. standalone).
  - name: apm_adapter
    desc: Display APM AC adapter status. FreeBSD, OpenBSD only.
  - name: apm_battery_life
    desc: Display APM battery life in percent. FreeBSD, OpenBSD only.
  - name: apm_battery_time
    desc: |-
      Display remaining APM battery life in hh:mm:ss or "unknown"
      if AC adapterstatus is on-line or charging. FreeBSD, OpenBSD only.      
  - name: audacious_bar
    desc: Progress bar.
    args:
      - (height),(width)
  - name: audacious_bitrate
    desc: Bitrate of current tune.
  - name: audacious_channels
    desc: Number of audio channels of current tune.
  - name: audacious_filename
    desc: Full path and filename of current tune.
  - name: audacious_frequency
    desc: Sampling frequency of current tune.
  - name: audacious_length
    desc: Total length of current tune as MM:SS.
  - name: audacious_length_seconds
    desc: Total length of current tune in seconds.
  - name: audacious_main_volume
    desc: The current volume fetched from Audacious.
  - name: audacious_playlist_length
    desc: Number of tunes in playlist.
  - name: audacious_playlist_position
    desc: Playlist position of current tune.
  - name: audacious_position
    desc: Position of current tune (MM:SS).
  - name: audacious_position_seconds
    desc: Position of current tune in seconds.
  - name: audacious_status
    desc: Player status (Playing/Paused/Stopped/Not running).
  - name: audacious_title
    desc: |-
      Title of current tune with optional maximum length
      specifier.      
    args:
      - (max length)
  - name: battery
    desc: |-
      Battery status and remaining percentage capacity of ACPI or
      APM battery. ACPI battery number can be given as argument.      
    default: BAT0
    args:
      - (num)
  - name: battery_bar
    desc: |-
      Battery percentage remaining of ACPI battery in a bar. ACPI battery number
      can be given as argument (use `all` to get the mean percentage remaining for
      all batteries).      
    default: BAT0
    args:
      - (height),(width)
      - (num)
  - name: battery_percent
    desc: |-
      Battery percentage remaining for ACPI battery. ACPI battery
      number can be given as argument (use `all` to get the
      mean percentage remaining for all batteries).      
    default: BAT0
    args:
      - (num)
  - name: battery_short
    desc: |-
      Battery status and remaining percentage capacity of ACPI or APM battery.
      ACPI battery number can be given as argument. This mode display a short
      status, which means that C is displayed instead of charging, D for
      discharging, F for full, N for not present, E for empty and U for unknown.      
    default: BAT0
    args:
      - (num)
  - name: battery_status
    desc: |-
      Battery status for ACPI battery. ACPI battery number can be
      given as arguments.      
    default: BAT0
    args:
      - (num)
  - name: battery_time
    desc: |-
      Battery charge/discharge time remaining of ACPI battery.
      ACPI battery number can be given as argument.      
    default: BAT0
    args:
      - (num)
  - name: blink
    desc: Let 'text_and_other_conky_vars' blink on and off.
    args:
      - text_and_other_conky_vars
  - name: buffers
    desc: Amount of memory buffered.
  - name: cached
    desc: Amount of memory cached.
  - name: cat
    desc: |-
      Reads a file and displays the contents in conky. This is
      useful if you have an independent process generating output that you
      want to include in conky.      
    args:
      - file
  - name: catp
    desc: |-
      Reads a file and displays the contents in conky. This is
      useful if you have an independent process generating output that you
      want to include in conky. This differs from $cat in that it parses the
      contents of the file, so you can insert things like ${color
      red}hi!${color} in your file and have it correctly parsed by Conky.      
    args:
      - file
  - name: cmdline_to_pid
    desc: PID of the first process that has string in its commandline.
    args:
      - string
  - name: cmus_aaa
    desc: Print aaa status of cmus (all/artist/album).
  - name: cmus_album
    desc: Prints the album of the current cmus song.
  - name: cmus_artist
    desc: Prints the artist of the current cmus song.
  - name: cmus_curtime
    desc: Current time of the current cmus song.
  - name: cmus_date
    desc: Print the date of the current cmus song.
  - name: cmus_file
    desc: Print the file name of the current cmus song.
  - name: cmus_genre
    desc: Print the genre name of the current cmus song.
  - name: cmus_percent
    desc: Percent of song's progress.
  - name: cmus_progress
    desc: cmus' progress bar.
    args:
      - (height),(width)
  - name: cmus_random
    desc: Random status of cmus (on/off).
  - name: cmus_repeat
    desc: Repeat status of cmus (song/all/off).
  - name: cmus_state
    desc: Current state of cmus (playing, paused, stopped etc).
  - name: cmus_timeleft
    desc: Time left of the current cmus song.
  - name: cmus_title
    desc: Prints the title of the current cmus song.
  - name: cmus_totaltime
    desc: Total length of the current cmus song.
  - name: cmus_track
    desc: Print track number of current cmus song.
  - name: color
    desc: |-
      Change drawing color to 'color' which is a name of a color
      or a hexcode preceded with #, e.g. #0A1B2C. If you use ncurses only
      the following colors are supported: red, green, yellow, blue, magenta,
      cyan, black, and white.      
    args:
      - (color)
  - name: colorN
    desc: |-
      Change drawing color to colorN configuration option, where N
      is a digit between 0 and 9, inclusively.      
  - name: combine
    desc: |-
      Places the lines of var2 to the right of the lines of var1
      separated by the chars that are put between var1 and var2. For
      example: ${combine ${head /proc/cpuinfo 2} - ${head /proc/meminfo 1}}
      gives as output "cpuinfo_line1 - meminfo_line1" on line 1 and
      "cpuinfo_line2 -" on line 2. $combine vars can also be nested to place
      more vars next to each other.      
    args:
      - var1
      - var2
  - name: conky_build_arch
    desc: CPU architecture Conky was built for.
  - name: conky_build_date
    desc: Date Conky was built.
  - name: conky_version
    desc: Conky version.
  - name: cpu
    desc: |-
      CPU usage in percents. For SMP machines, the CPU number can
      be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu
      cpuX} (X >= 1) are individual CPUs.      
    args:
      - (cpuN)
  - name: cpubar
    desc: |-
      Bar that shows CPU usage, height is bar's height in pixels.
      See $cpu for more info on SMP.      
    args:
      - (cpuN)
      - (height),(width)
  - name: cpugauge
    desc: |-
      Elliptical gauge that shows CPU usage, height and width are
      gauge's vertical and horizontal axis respectively. See $cpu for more
      info on SMP.      
    args:
      - (cpuN)
      - (height),(width)
  - name: cpugovernor
    desc: |-
      The active CPU scaling governor, defaulting to the first core.
      See $cpu for more info on SMP. Linux only.      
    args:
      - (cpuN)
  - name: cpugraph
    desc: |-
      CPU usage graph, with optional colours in hex, minus the #.
      See $cpu for more info on SMP. Uses a logarithmic scale (to see small
      numbers) when you use the -l switch. Takes the switch '-t' to use a
      temperature gradient, which makes the gradient values change depending
      on the amplitude of a particular graph value (try it and see).      
    args:
      - (cpuN)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: curl
    desc: |-
      Download data from URI using Curl at the specified interval.
      The interval may be a positive floating point value (0 is allowed),
      otherwise defaults to 15 minutes. Most useful when used in conjunction
      with Lua and the Lua API. This object is threaded, and once a thread
      is created it can't be explicitly destroyed. One thread will run for
      each URI specified. You can use any protocol that Curl supports.      
    args:
      - url
      - (interval_in_minutes)
  - name: desktop
    desc: |-
      Number of the desktop on which conky is running or the
      message "Not running in X" if this is the case.      
  - name: desktop_name
    desc: |-
      Name of the desktop on which conky is running or the message
      "Not running in X" if this is the case.      
  - name: desktop_number
    desc: |-
      Number of desktops or the message "Not running in X" if this
      is the case.      
  - name: disk_protect
    desc: |-
      Disk protection status, if supported (needs kernel-patch).
      Prints either "frozen" or "free " (note the padding).      
    args:
      - device
  - name: diskio
    desc: |-
      Displays current disk IO. Device is optional, and takes the
      form of sda for /dev/sda. A block device label can be specified with
      label:foo and a block device partuuid can be specified with
      partuuid:40000000-01.      
    args:
      - (device)
  - name: diskio_read
    desc: Displays current disk IO for reads. Device as in diskio.
    args:
      - (device)
  - name: diskio_write
    desc: Displays current disk IO for writes. Device as in diskio.
    args:
      - (device)
  - name: diskiograph
    desc: |-
      Disk IO graph, colours defined in hex, minus the #. If scale
      is non-zero, it becomes the scale for the graph. Uses a logarithmic
      scale (to see small numbers) when you use -l switch. Takes the switch
      '-t' to use a temperature gradient, which makes the gradient values
      change depending on the amplitude of a particular graph value (try it
      and see).      
    args:
      - (device)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: diskiograph_read
    desc: |-
      Disk IO graph for reads, colours defined in hex, minus the
      #. If scale is non-zero, it becomes the scale for the graph. Device as
      in diskio. Uses a logarithmic scale (to see small numbers) when you
      use -l switch. Takes the switch '-t' to use a temperature gradient,
      which makes the gradient values change depending on the amplitude of a
      particular graph value (try it and see).      
    args:
      - (device)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: diskiograph_write
    desc: |-
      Disk IO graph for writes, colours defined in hex, minus the
      #. If scale is non-zero, it becomes the scale for the graph. Device as
      in diskio. Uses a logarithmic scale (to see small numbers) when you
      use -l switch. Takes the switch '-t' to use a temperature gradient,
      which makes the gradient values change depending on the amplitude of a
      particular graph value (try it and see).      
    args:
      - (device)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: distribution
    desc: |-
      The name of the distribution. It could be that some of the
      untested distributions will show up wrong or as "unknown", if that's
      the case post a bug on sourceforge, make sure it contains the name of
      your distribution, the contents of and if there is a file that
      only exists on your distribution, also add the path of that file in
      the bug. If there is no such file, please add another way which we can
      use to identify your distribution.      
    other:
      filename: /proc/version
  - name: downspeed
    desc: Download speed in suitable IEC units.
    args:
      - (net)
  - name: downspeedf
    desc: Download speed in KiB with one decimal.
    args:
      - (net)
  - name: downspeedgraph
    desc: |-
      Download speed graph, colours defined in hex, minus the #.
      If scale is non-zero, it becomes the scale for the graph. Uses a
      logarithmic scale (to see small numbers) when you use -l switch. Takes
      the switch '-t' to use a temperature gradient, which makes the
      gradient values change depending on the amplitude of a particular
      graph value (try it and see).      
    args:
      - (netdev)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: draft_mails
    desc: |-
      Number of mails marked as draft in the specified mailbox or
      mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: else
    desc: Text to show if any of the above are not true.
  - name: endif
    desc: Ends an $if block.
  - name: entropy_avail
    desc: Current entropy available for crypto freaks.
  - name: entropy_bar
    desc: Normalized bar of available entropy for crypto freaks.
    args:
      - (height),(width)
  - name: entropy_perc
    desc: |-
      Percentage of entropy available in comparison to the
      poolsize.      
  - name: entropy_poolsize
    desc: Total size of system entropy pool for crypto freaks.
  - name: eval
    desc: |-
      Evaluates given string according to the rules of conky.text
      interpretation, i.e. parsing any contained text object specifications
      into their output, any occurring '$$' into a single '$' and so on. The
      output is then being parsed again.      
    args:
      - string
  - name: exec
    desc: |-
      Executes a shell command and displays the output in conky.
      Warning: this takes a lot more resources than other variables. I'd
      recommend coding wanted behaviour in C/C++ and posting a patch.      
    args:
      - command
  - name: execbar
    desc: |-
      Same as exec, except if the first value returned is a value
      between 0-100, it will use that number to draw a horizontal bar. The
      height and width parameters are optional, and default to the
      default_bar_height and default_bar_width config settings,
      respectively.      
    args:
      - (height),(width)
      - command
  - name: execgauge
    desc: |-
      Same as exec, except if the first value returned is a value
      between 0-100, it will use that number to draw a round gauge (much
      like a vehicle speedometer). The height and width parameters are
      optional, and default to the default_gauge_height and
      default_gauge_width config settings, respectively.      
    args:
      - (height),(width)
      - command
  - name: execgraph
    desc: |-
      Draws a horizontally scrolling graph with values from 0-100 plotted on the
      vertical axis. All parameters following the command are optional. Gradient
      colors can be specified as hexadecimal values with no 0x or # prefix. Use
      the -t switch to enable a temperature gradient, so that small values are
      "cold" with color 1 and large values are "hot" with color 2. Without the -t
      switch, the colors produce a horizontal gradient spanning the width of the
      graph. The scale parameter defines the maximum value of the graph.  Use the
      -l switch to enable a logarithmic scale, which helps to see small values.
      The default size for graphs can be controlled via the default_graph_height
      and default_graph_width config settings.

      If you need to execute a command with spaces, you have a
      couple options:

      1. wrap your command in double-quotes, or
      2. put your command into a separate file, such as ~/bin/myscript.sh, and use
      that as your execgraph command.

      Remember to make your script executable!

      In the following example, we set up execgraph to display seconds (0-59) on a
      graph that is 50px high and 200px wide, using a temperature gradient with
      colors ranging from red for small values (FF0000) to yellow for large values
      (FFFF00). We set the scale to 60.

      ```
      ${execgraph ~/seconds.sh 50,200 FF0000 FFFF00 60 -t}
      ```      
    args:
      - command
      - (height),(width)
      - (gradient color 1)
      - (gradient color 2)
      - (scale)
      - (-t)
      - (-l)
  - name: execi
    desc: |-
      Same as exec, but with a specific interval in seconds. The
      interval can't be less than the update_interval in your configuration.
      See also $texeci.      
    args:
      - interval
      - command
  - name: execibar
    desc: Same as execbar, but with an interval.
    args:
      - interval
      - (height),(width)
      - command
  - name: execigauge
    desc: Same as execgauge, but with an interval.
    args:
      - interval
      - (height),(width)
      - command
  - name: execigraph
    desc: Same as execgraph, but with an interval.
    args:
      - interval
      - command
      - (height),(width)
      - (gradient color 1)
      - (gradient color 2)
      - (scale)
      - (-t)
      - (-l)
  - name: execp
    desc: |-
      Executes a shell command and displays the output in conky.
      Warning: this takes a lot more resources than other variables. I'd
      recommend coding wanted behaviour in C/C++ and posting a patch. This
      differs from $exec in that it parses the output of the command, so you
      can insert things like ${color red}hi!${color} in your script and have
      it correctly parsed by Conky. Caveats: Conky parses and evaluates the
      output of $execp every time Conky loops, and then destroys all the
      objects. If you try to use anything like $execi within an $execp
      statement, it will functionally run at the same interval that the
      $execp statement runs, as it is created and destroyed at every
      interval.      
    args:
      - command
  - name: execpi
    desc: |-
      Same as execp, but with an interval. Note that the output
      from the $execpi command is still parsed and evaluated at every
      interval.      
    args:
      - interval
      - command
  - name: flagged_mails
    desc: |-
      Number of mails marked as flagged in the specified mailbox
      or mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: font
    desc: |-
      Specify a different font. This new font will apply to the
      current line and everything following. You can use a $font with no
      arguments to change back to the default font (much like with $color).      
    args:
      - (font)
  - name: fontN
    desc: |-
      Change font to fontN configuration option, where N is a
      digit between 0 and 9, inclusively.      
  - name: format_time
    desc: |-
      Format time given in seconds. This var only works when the
      times_in_seconds configuration setting is on. Format is a string that
      should start and end with a "-char. The "-chars are not part of the
      output, \w,\d,\h,\m,\s,\(,\) and \\ are replaced by
      weeks,days,hours,minutes,seconds,(,) and \. If you leave out a unit,
      it's value will be expressed in the highest unit lower than the one
      left out. Text between ()-chars will not be visible if a replaced unit
      in this text is 0. If seconds is a decimal number then you can see the
      numbers behind the point by using \S followed by a number that
      specifies the amount of digits behind the point that you want to see
      (maximum 9). You can also place a 'x' behind \S so you have all digits
      behind the point and no trailing zero's. (also maximum 9).      
    args:
      - seconds
      - format
  - name: forwarded_mails
    desc: |-
      Number of mails marked as forwarded in the specified mailbox
      or mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: free_bufcache
    desc: Amount of memory cached or buffered, as reported by free. Linux only.
  - name: freq
    desc: |-
      Returns CPU #n's frequency in MHz. CPUs are counted from 1.      
    default: 1
    args:
      - (n)
  - name: freq2
    desc: |-
      Returns CPU #n's clock speed from assembly in MHz. CPUs are
      counted from 1.      
    default: 1
    args:
      - (n)
  - name: freq_g
    desc: |-
      Returns CPU #n's frequency in GHz. CPUs are counted from 1.      
    default: 1
    args:
      - (n)
  - name: fs_bar
    desc: |-
      Bar that shows how much space is used on a file system.
      height is the height in pixels. fs is any file on that file system.      
    args:
      - (height),(width)
      - fs
  - name: fs_bar_free
    desc: |-
      Bar that shows how much space is free on a file system.
      height is the height in pixels. fs is any file on that file system.      
    args:
      - (height),(width)
      - fs
  - name: fs_free
    desc: Free space on a file system available for users.
    args:
      - (fs)
  - name: fs_free_perc
    desc: |-
      Free percentage of space on a file system available for
      users.      
    args:
      - (fs)
  - name: fs_size
    desc: File system size.
    args:
      - (fs)
  - name: fs_type
    desc: File system type.
    args:
      - (fs)
  - name: fs_used
    desc: File system used space.
    args:
      - (fs)
  - name: fs_used_perc
    desc: Percent of file system used space.
    args:
      - (fs)
  - name: gid_name
    desc: Name of group with this gid.
    args:
      - gid
  - name: github_notifications
    desc: Number of GitHub notifications.
  - name: goto
    desc: The next element will be printed at position 'x'.
    args:
      - x
  - name: gw_iface
    desc: |-
      Displays the default route's interface or "multiple"/"none"
      accordingly.      
  - name: gw_ip
    desc: |-
      Displays the default gateway's IP or "multiple"/"none"
      accordingly.      
  - name: hddtemp
    desc: |-
      Displays temperature of a selected hard disk drive as
      reported by the hddtemp daemon. Use hddtemp_host and hddtemp_port to
      specify a host and port for all hddtemp objects. If no dev parameter
      is given, the first disk returned by the hddtemp daemon is used.      
    args:
      - (dev)
  - name: head
    desc: |-
      Displays first N lines of supplied text file. The file is
      checked every 'next_check' update. If next_check is not supplied,
      Conky defaults to 2. Max of 30 lines can be displayed, or until the
      text buffer is filled.      
    args:
      - logfile
      - lines
      - (next_check)
  - name: hr
    desc: Horizontal line, height is the height in pixels.
    args:
      - (height)
  - name: hwmon
    desc: |-
      Hwmon sensor from sysfs (Linux 2.6). Parameter dev can be:
      1. Number. e.g `1` means hwmon1.
      2. Module name. e.g. `k10temp` means the first hwmon device whose module
      name is `k10temp.
      3. Omitted. Then the first hwmon device (hwmon0) will be used.

      Parameter type is either `in` or `vol` meaning voltage; `fan` meaning fan;
      `temp` meaning temperature. Parameter n is number of the sensor. See
      `/sys/class/hwmon/` on your local computer.  The optional arguments `factor`
      and `offset` allow precalculation of the raw input, which is being modified
      as follows: `input = input * factor + offset`. Note that they have to be
      given as decimal values (i.e. contain at least one decimal place).      
    args:
      - (dev)
      - type
      - n
      - (factor offset)
    other:
      filename: null
  - name: i2c
    desc: |-
      I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have
      only one I2C device. Parameter type is either `in` or `vol` meaning voltage;
      `fan` meaning fan; `temp` meaning temperature. Parameter n is number of the
      sensor. See `/sys/bus/i2c/devices/` on your local computer. The optional
      arguments `factor` and `offset` allow precalculation of the raw input, which
      is being modified as follows: `input = input * factor + offset`. Note that
      they have to be given as decimal values (i.e. contain at least one decimal
      place).      
    args:
      - (dev)
      - type
      - n
      - (factor offset)
    other:
      filename: null
  - name: i8k_ac_status
    desc: |-
      If running the i8k kernel driver for Inspiron laptops, displays whether ac
      power is on, as listed in `/proc/i8k` (translated to human-readable). Beware
      that this is by default not enabled by i8k itself.      
  - name: i8k_bios
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the bios version as listed in /proc/i8k.      
  - name: i8k_buttons_status
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the volume buttons status as listed in /proc/i8k.      
  - name: i8k_cpu_temp
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the cpu temperature in Celsius, as reported by /proc/i8k.      
  - name: i8k_left_fan_rpm
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the left fan's rate of rotation, in revolutions per minute as
      listed in /proc/i8k. Beware, some laptops i8k reports these fans in
      reverse order.      
  - name: i8k_left_fan_status
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the left fan status as listed in /proc/i8k (translated to
      human-readable). Beware, some laptops i8k reports these fans in
      reverse order.      
  - name: i8k_right_fan_rpm
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the right fan's rate of rotation, in revolutions per minute
      as listed in /proc/i8k. Beware, some laptops i8k reports these fans in
      reverse order.      
  - name: i8k_right_fan_status
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the right fan status as listed in /proc/i8k (translated to
      human-readable). Beware, some laptops i8k reports these fans in
      reverse order.      
  - name: i8k_serial
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays your laptop serial number as listed in /proc/i8k.      
  - name: i8k_version
    desc: |-
      If running the i8k kernel driver for Inspiron laptops,
      displays the version formatting of /proc/i8k.      
  - name: ibm_brightness
    desc: |-
      If running the IBM ACPI, displays the brigtness of the
      laptops's LCD (0-7).      
  - name: ibm_fan
    desc: If running the IBM ACPI, displays the fan speed.
  - name: ibm_temps
    desc: |-
      If running the IBM ACPI, displays the temperatures from the
      IBM temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the
      GPU.      
    args:
      - N
  - name: ibm_thinklight
    desc:
      "If running the IBM ACPI, displays the status of your\nThinkLight\u2122. Value\
      \ is either 'on', 'off' or 'unknown'."
  - name: ibm_volume
    desc: |-
      If running the IBM ACPI, displays the "master" volume,
      controlled by the volume keys (0-14).      
  - name: ical
    desc: |-
      Shows title of event number 'number' in the ical (RFC 5545)
      file 'file'. The events are first ordered by starting time, events
      that started in the past are ignored. The events that are shown are
      the VEVENTS, the title that is shown is the SUMMARY and the starting
      time used for sorting is DTSTART.      
    args:
      - number
      - file
  - name: iconv_start
    desc: |-
      Convert text from one codeset to another using GNU iconv.
      Needs to be stopped with iconv_stop.      
    args:
      - codeset_from
      - codeset_to
  - name: iconv_stop
    desc: Stop iconv codeset conversion.
  - name: if_empty
    desc: |-
      if conky variable VAR is empty, display everything between
      $if_empty and the matching $endif.      
    args:
      - (var)
  - name: if_existing
    desc: |-
      if FILE exists, display everything between if_existing and
      the matching $endif. The optional second parameter checks for FILE
      containing the specified string and prints everything between
      $if_existing and the matching $endif.      
    args:
      - file
      - (string)
  - name: if_gw
    desc: |-
      if there is at least one default gateway, display everything
      between $if_gw and the matching $endif.      
  - name: if_match
    desc: |-
      Evaluates the given boolean expression, printing everything
      between $if_match and the matching $endif depending on whether the
      evaluation returns true or not. Valid expressions consist of a left
      side, an operator and a right side. Left and right sides are being
      parsed for contained text objects before evaluation.

      Recognised left and right side types are:

      * **double**: Argument consists of only digits and a single dot.
      * **long**: Argument consists of only digits.
      * **string**: Argument is enclosed in quotation marks (`"`).

      Valid operands are:

      * `<` or `>`
      * `<=` or `>=`
      * `==` or `!=`      
    args:
      - expression
  - name: if_mixer_mute
    desc: |-
      If mixer exists, display everything between $if_mixer_mute
      and the matching $endif. If no mixer is specified, "Vol" is used.      
    args:
      - (mixer)
  - name: if_mounted
    desc: |-
      if MOUNTPOINT is mounted, display everything between
      $if_mounted and the matching $endif.      
    args:
      - (mountpoint)
  - name: if_mpd_playing
    desc: |-
      if mpd is playing or paused, display everything between
      $if_mpd_playing and the matching $endif.      
  - name: if_pa_sink_muted
    desc: |-
      If Pulseaudio's default sink is muted, display everything
      between $if_pa_sink_muted and the corresponding $else or $endif.      
  - name: if_running
    desc:
      "If PROCESS is running, display everything between\n$if_running and the corresponding\
      \ $else or $endif. Note that PROCESS\nmay be either a full command line with arguments\
      \ (without the\ndirectory prefix), or simply the name of an executable. For example,\n\
      either of the following will be true if there is a running process\nwith the command\
      \ line `/usr/bin/conky -u 5`:\n\n* `${if_running conky -u 5}` or\n* `${if_running\
      \ conky}`\n    \nIt is important not to include trailing spaces. For example,\
      \ `${if_running\nconky }` will be false."
    args:
      - (process)
  - name: if_smapi_bat_installed
    desc: |-
      when using smapi, if the battery with index INDEX is
      installed, display everything between $if_smapi_bat_installed and the
      matching $endif.      
    args:
      - (INDEX)
  - name: if_up
    desc: |-
      if INTERFACE exists and is up, display everything between
      $if_up and the matching $endif.      
    args:
      - (interface)
  - name: if_updatenr
    desc: |-
      If it's the UPDATENR-th time that conky updates, display
      everything between $if_updatenr and the matching $endif. The counter
      resets when the highest UPDATENR is reached.

      Example: `{$if_updatenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr
      4}$endif` shows foo 25% of the time followed by bar 25% of the time followed
      by nothing the other half of the time.      
    args:
      - (updatenr)
  - name: if_xmms2_connected
    desc: |-
      Display everything between $if_xmms2_connected and the
      matching $endif if xmms2 is running.      
  - name: iface
    desc: Display interface names starting from 1, eg ${iface 1}.
    args:
      - (number)
  - name: image
    desc: |-
      Renders an image from the path specified using Imlib2. Takes
      4 optional arguments: a position, a size, a no-cache switch, and a
      cache flush interval. Changing the x,y position will move the position
      of the image, and changing the WxH will scale the image. If you
      specify the no-cache flag (-n), the image will not be cached.
      Alternately, you can specify the -f int switch to specify a cache
      flush interval for a particular image. Example: ${image
      /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200} will render
      'cheeseburger.jpg' at (20,20) scaled to 200x200 pixels. Conky does not
      make any attempt to adjust the position (or any other formatting) of
      images, they are just rendered as per the arguments passed. The only
      reason $image is part of the conky.text section, is to allow for
      runtime modifications, through $execp $lua_parse, or some other
      method.      
    args:
      - <path to image>
      - (-p x,y)
      - (-s WxH)
      - (-n)
      - (-f interval)
  - name: imap_messages
    desc: |-
      Displays the number of messages in your global IMAP inbox by
      default. You can define individual IMAP inboxes separately by passing
      arguments to this object. Arguments are: "host user pass [-i interval
      (in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r retries]".
      Default port is 143, default folder is 'INBOX', default interval is 5
      minutes, and default number of retries before giving up is 5. If the
      password is supplied as '*', you will be prompted to enter the
      password when Conky starts.      
    args:
      - (args)
  - name: imap_unseen
    desc: |-
      Displays the number of unseen messages in your global IMAP
      inbox by default. You can define individual IMAP inboxes separately by
      passing arguments to this object. Arguments are: "host user pass [-i
      interval (in seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r
      retries]". Default port is 143, default folder is 'INBOX', default
      interval is 5 minutes, and default number of retries before giving up
      is 5. If the password is supplied as '*', you will be prompted to
      enter the password when Conky starts.      
    args:
      - (args)
  - name: intel_backlight
    desc: Display the brightness of your Intel backlight in percent.
  - name: ioscheduler
    desc: |-
      Prints the current ioscheduler used for the given disk name
      (i.e. e.g. "hda" or "sdb").      
    args:
      - disk
  - name: irc
    desc: |-
      Shows everything that's being told in #channel on IRCserver
      'server'. TCP-port 6667 is used for the connection unless 'port' is
      specified. Shows everything since the last time or the last
      'max_msg_lines' entries if specified.      
    args:
      - server(:port)
      - "#channel"
      - (max_msg_lines)
  - name: journal
    desc: |-
      Displays last N lines of the systemd journal. The optional
      type can be 'user' or 'system' which will show only the user or system
      journal respectively. By default, all journal lines visible to the
      user are shown. A maximum of 200 lines can be displayed, or until the
      text buffer is filled.      
    args:
      - lines
      - (type)
  - name: kernel
    desc: Kernel version.
  - name: key_caps_lock
    desc: An indicator for Capital Lock key.
  - name: key_num_lock
    desc: An indicator for Number Lock key.
  - name: key_scroll_lock
    desc: An indicator for Scrolling Lock key.
  - name: keyboard_layout
    desc: Display keyboard layout.
  - name: laptop_mode
    desc: The value of `/proc/sys/vm/laptop_mode`.
  - name: legacymem
    desc: Amount of memory used, calculated the same way as in the `free` program.
  - name: lines
    desc: Displays the number of lines in the given file.
    args:
      - textfile
  - name: loadavg
    desc: |-
      System load average, 1 is for past 1 minute, 2 for past 5
      minutes and 3 for past 15 minutes. Without argument, prints all three
      values separated by whitespace.      
    args:
      - (1|2|3)
  - name: loadgraph
    desc: |-
      Load1 average graph, similar to xload, with optional colours
      in hex, minus the #. Uses a logarithmic scale (to see small numbers)
      when you use the -l switch. Takes the switch '-t' to use a temperature
      gradient, which makes the gradient values change depending on the
      amplitude of a particular graph value (try it and see).      
    args:
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: lowercase
    desc: Converts all letters into lowercase.
    args:
      - text
  - name: lua
    desc: |-
      Executes a Lua function with given parameters, then prints
      the returned string. See also 'lua_load' on how to load scripts. Conky
      puts 'conky_' in front of function_name to prevent accidental calls to
      the wrong function unless you place 'conky_' in front of it
      yourself.      
    args:
      - function_name
      - (function parameters)
  - name: lua_bar
    desc: |-
      Executes a Lua function with given parameters and draws a
      bar. Expects result value to be an integer between 0 and 100. See also
      'lua_load' on how to load scripts. Conky puts 'conky_' in front of
      function_name to prevent accidental calls to the wrong function unless
      you place 'conky_' in front of it yourself.      
    args:
      - (height,width)
      - function_name
      - (function parameters)
  - name: lua_gauge
    desc: |-
      Executes a Lua function with given parameters and draws a
      gauge. Expects result value to be an integer between 0 and 100. See
      also 'lua_load' on how to load scripts. Conky puts 'conky_' in front
      of function_name to prevent accidental calls to the wrong function
      unless you place 'conky_' in front of it yourself.      
    args:
      - (height,width)
      - function_name
      - (function parameters)
  - name: lua_graph
    desc: |-
      Executes a Lua function with and draws a graph. Expects
      result value to be any number, and by default will scale to show the
      full range. See also 'lua_load' on how to load scripts. Takes the
      switch '-t' to use a temperature gradient, which makes the gradient
      values change depending on the amplitude of a particular graph value
      (try it and see). Conky puts 'conky_' in front of function_name to
      prevent accidental calls to the wrong function unless you put you
      place 'conky_' in front of it yourself.      
    args:
      - function_name
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: lua_parse
    desc: |-
      Executes a Lua function with given parameters as per $lua,
      then parses and prints the result value as per the syntax for the
      conky.text section. See also 'lua_load' on how to load scripts. Conky
      puts 'conky_' in front of function_name to prevent accidental calls to
      the wrong function unless you place 'conky_' in front of it
      yourself.      
    args:
      - function_name
      - (function parameters)
  - name: machine
    desc: Machine, e.g. i686, x86_64.
  - name: mails
    desc: |-
      Mail count in the specified mailbox or your mail spool if
      not. Both mbox and maildir type mailboxes are supported. You can use a
      program like fetchmail to get mails from some server using your
      favourite protocol. See also new_mails.      
    args:
      - (mailbox)
      - (interval)
  - name: mboxscan
    desc: |-
      Print a summary of recent messages in an mbox format
      mailbox. mbox parameter is the filename of the mailbox (can be
      encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}      
    args:
      - (-n number of messages to print)
      - (-fw from width)
      - (-sw subject width)
      - mbox
  - name: mem
    desc: Amount of memory in use.
  - name: memavail
    desc: Amount of available memory as recorded in /proc/meminfo. Linux 3.14+ only.
  - name: membar
    desc: Bar that shows amount of memory in use.
    args:
      - (height),(width)
  - name: memdirty
    desc: Amount of "dirty" memory. Linux only.
  - name: memeasyfree
    desc: |-
      Amount of free memory including the memory that is very
      easily freed (buffers/cache).      
  - name: memfree
    desc: Amount of free memory.
  - name: memgauge
    desc: Gauge that shows amount of memory in use (see cpugauge).
    args:
      - (height),(width)
  - name: memgraph
    desc: |-
      Memory usage graph. Uses a logarithmic scale (to see small
      numbers) when you use the -l switch. Takes the switch '-t' to use a
      temperature gradient, which makes the gradient values change depending
      on the amplitude of a particular graph value (try it and see).      
    args:
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: memmax
    desc: Total amount of memory.
  - name: memperc
    desc: Percentage of memory in use.
  - name: memwithbuffers
    desc: |-
      Amount of memory in use, including that used by system
      buffers and caches.      
  - name: memwithbuffersbar
    desc: |-
      Bar that shows amount of memory in use (including memory
      used by system buffers and caches).      
    args:
      - (height),(width)
  - name: memwithbuffersgraph
    desc: |-
      Memory usage graph including memory used by system buffers
      and cache. Uses a logarithmic scale (to see small numbers) when you
      use the -l switch. Takes the switch '-t' to use a temperature
      gradient, which makes the gradient values change depending on the
      amplitude of a particular graph value (try it and see).      
    args:
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: mixer
    desc: |-
      Prints the mixer value as reported by the OS. On Linux, this
      variable uses the OSS emulation, so you need the proper kernel module
      loaded. Default mixer is "Vol", but you can specify one of the
      available OSS controls: "Vol", "Bass", "Trebl", "Synth", "Pcm",
      "Spkr", "Line", "Mic", "CD", "Mix", "Pcm2 ", "Rec", "IGain", "OGain",
      "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3",
      "PhoneIn", "PhoneOut", "Video", "Radio" and "Monitor".      
    default: Vol
    args:
      - (device)
  - name: mixerbar
    desc: |-
      Displays mixer value in a bar as reported by the OS. See
      docs for $mixer for details on arguments.      
    args:
      - (device)
  - name: mixerl
    desc: |-
      Prints the left channel mixer value as reported by the OS.
      See docs for $mixer for details on arguments.      
    args:
      - (device)
  - name: mixerlbar
    desc: |-
      Displays the left channel mixer value in a bar as reported
      by the OS. See docs for $mixer for details on arguments.      
    args:
      - (device)
  - name: mixerr
    desc: |-
      Prints the right channel mixer value as reported by the OS.
      See docs for $mixer for details on arguments.      
    args:
      - (device)
  - name: mixerrbar
    desc: |-
      Displays the right channel mixer value in a bar as reported
      by the OS. See docs for $mixer for details on arguments.      
    args:
      - (device)
  - name: moc_album
    desc: Album of the current MOC song.
  - name: moc_artist
    desc: Artist of the current MOC song.
  - name: moc_bitrate
    desc: Bitrate in the current MOC song.
  - name: moc_curtime
    desc: Current time of the current MOC song.
  - name: moc_file
    desc: File name of the current MOC song.
  - name: moc_rate
    desc: Rate of the current MOC song.
  - name: moc_song
    desc: The current song name being played in MOC.
  - name: moc_state
    desc: Current state of MOC; playing, stopped etc.
  - name: moc_timeleft
    desc: Time left in the current MOC song.
  - name: moc_title
    desc: Title of the current MOC song.
  - name: moc_totaltime
    desc: Total length of the current MOC song.
  - name: monitor
    desc: |-
      Number of the monitor on which conky is running or the
      message "Not running in X" if this is the case.      
  - name: monitor_number
    desc: |-
      Number of monitors or the message "Not running in X" if this
      is the case.      
  - name: mouse_speed
    desc: Display mouse speed.
  - name: mpd_album
    desc: Album in current MPD song.
  - name: mpd_albumartist
    desc: Artist of the album of the current MPD song.
  - name: mpd_artist
    desc: Artist in current MPD song must be enabled at compile.
  - name: mpd_bar
    desc: Bar of mpd's progress.
    args:
      - (height),(width)
  - name: mpd_bitrate
    desc: Bitrate of current song.
  - name: mpd_comment
    desc: Comment of current MPD song.
    args:
      - (max
      - length)
  - name: mpd_date
    desc: Date of current song.
  - name: mpd_elapsed
    desc: Song's elapsed time.
  - name: mpd_file
    desc: Prints the file name of the current MPD song.
  - name: mpd_length
    desc: Song's length.
  - name: mpd_name
    desc: Prints the MPD name field.
  - name: mpd_percent
    desc: Percent of song's progress.
  - name: mpd_random
    desc: Random status (On/Off).
  - name: mpd_repeat
    desc: Repeat status (On/Off).
  - name: mpd_smart
    desc: |-
      Prints the song name in either the form "artist - title" or
      file name, depending on whats available.      
    args:
      - (max
      - length)
  - name: mpd_status
    desc: Playing, stopped, et cetera.
  - name: mpd_title
    desc: Title of current MPD song.
    args:
      - (max
      - length)
  - name: mpd_track
    desc: Prints the MPD track field.
  - name: mpd_vol
    desc: MPD's volume.
  - name: mysql
    desc: |-
      Shows the first field of the first row of the result of the
      query.      
    args:
      - query
  - name: nameserver
    desc: |-
      Print a nameserver from /etc/resolv.conf.      
    default: 0
    args:
      - (index)
  - name: new_mails
    desc: |-
      Unread mail count in the specified mailbox or mail spool if
      not. Both mbox and maildir type mailboxes are supported.      
    args:
      - (mailbox)
      - (interval)
  - name: no_update
    desc: |-
      Shows text and parses the vars in it, but doesn't update
      them. Use this for things that do not change while conky is running,
      like $machine, $conky_version,... By not updating this you can save
      some resources.      
    args:
      - text
  - name: nodename
    desc: Hostname.
  - name: nodename_short
    desc: Short hostname (same as 'hostname -s' shell command).
  - name: nvidia
    desc: |-
      Nvidia graphics card information via the XNVCtrl library.

      *GPU_ID:* Optional parameter to choose the GPU to be used as 0,1,2,3,..
      Default parameter is 0

      *Possible arguments:* (Temperatures are printed as float, all other
      values as integer. Bracketed arguments are aliases)

      **gputemp**( **temp**) **GPU temperature**
      **gputempthreshold**( **threshold**) **Temperature threshold where the
      GPU will reduce it\'s clock** speed
      **ambienttemp**( **ambient**) **Ambient temperature outside the
      graphics** card
      **gpufreqcur**( **gpufreq**) **Current GPU clock speed**
      **gpufreqmin** **Minimum GPU clock speed**
      **gpufreqmax** **Maximum GPU clock speed**
      **memfreqcur**( **memfreq**) **Current memory clock speed**
      **memfreqmin** **Minimum memory clock speed**
      **memfreqmax** **Maximum memory clock speed**
      **mtrfreqcur**( **mtrfreq**) **Current memory transfer rate clock
      speed**
      **mtrfreqmin** **Minimum memory transfer rate clock speed**
      **mtrfreqmax** **Maximum memory transfer rate clock speed**
      **perflevelcur**( **perflevel**) **Current performance level**
      **perflevelmin** **Lowest performance level**
      **perflevelmax** **Highest performance level**
      **perfmode** **Performance mode**
      **gpuutil** **GPU utilization %**
      **membwutil** **Memory bandwidth utilization %**
      **videoutil** **Video engine utilization %**
      **pcieutil** **PCIe bandwidth utilization %**
      **memused**( **mem**) **Amount of used memory**
      **memfree**( **memavail**) **Amount of free memory**
      **memmax**( **memtotal**) **Total amount of memory**
      **memutil**( **memperc**) **Memory utilization %**
      **fanspeed** **Fan speed**
      **fanlevel** **Fan level %**
      **imagequality** **Image quality**
      **modelname** **name of the GPU card**
      **driverversion** **Driver version**      
    args:
      - argument
      - (GPU_ID)
  - name: nvidiabar
    desc: |-
      Same as nvidia, except it draws its output in a horizontal bar. The
      height and width parameters are optional, and default to the
      default_bar_height and default_bar_width config settings,
      respectively.

      *GPU_ID:* Optional parameter to choose the GPU to be used as 0,1,2,3,..
      Default parameter is 0

      *Note the following arguments are* incompatible: **gputempthreshold**(
      **threshold**)
      **gpufreqmin**
      **gpufreqmax**
      **memfreqmin**
      **memfreqmax**
      **mtrfreqmin**
      **mtrfreqmax**
      **perflevelmin**
      **perflevelmax**
      **perfmode**
      **memtotal**( **memmax**)
      **fanspeed**      
    args:
      - (height),(width)
      - argument
      - (GPU_ID)
  - name: nvidiagauge
    desc: |-
      Same as nvidiabar, except a round gauge (much like a vehicle
      speedometer). The height and width parameters are optional, and
      default to the default_gauge_height and default_gauge_width config
      settings, respectively.

      *GPU_ID:*Optional parameter to choose the GPU to be used as 0,1,2,3,..
      Default parameter is 0

      For possible arguments see nvidia and nvidiabar.      
    args:
      - (height),(width)
      - argument
      - (GPU_ID)
  - name: nvidiagraph
    desc: |-
      Same as nvidiabar, except a horizontally scrolling graph with values
      from 0-100 plotted on the vertical axis. The height and width
      parameters are optional, and default to the default_graph_height and
      default_graph_width config settings, respectively.

      *GPU_ID:* NOT optional. This parameter allows to choose the GPU to be
      used as 0,1,2,3,..

      For possible arguments see nvidia and nvidiabar. To learn more about the
      -t -l and gradient color options, see execgraph.      
    args:
      - argument
      - (height),(width)
      - (gradient color 1)
      - (gradient color 2)
      - (scale)
      - (-t)
      - (-l)
      - GPU_ID
  - name: offset
    desc: Move text over by N pixels. See also $voffset.
    args:
      - (pixels)
  - name: outlinecolor
    desc: Change outline color.
    args:
      - (color)
  - name: pa_card_active_profile
    desc: Pulseaudio's default card active profile.
  - name: pa_card_name
    desc: Pulseaudio's default card name.
  - name: pa_sink_active_port_description
    desc: Pulseaudio's default sink active port description.
  - name: pa_sink_active_port_name
    desc: Pulseaudio's default sink active port name.
  - name: pa_sink_description
    desc: Pulseaudio's default sink description.
  - name: pa_sink_volume
    desc: Pulseaudio's default sink volume percentage.
  - name: pa_sink_volumebar
    desc: Pulseaudio's default sink volume bar.
  - name: password
    desc: Generate random passwords.
    args:
      - (length)
  - name: pb_battery
    desc: |-
      If running on Apple powerbook/ibook, display information on battery
      status. The item parameter specifies, what information to display.
      Exactly one item must be specified. Valid items are:

      **status** **Display if battery is fully charged, charging,**
      discharging or absent (running on AC)
      **percent** **Display charge of battery in percent, if charging or**
      discharging. Nothing will be displayed, if battery is fully charged or
      absent.
      **time** **Display the time remaining until the battery will be** fully
      charged or discharged at current rate. Nothing is displayed, if battery
      is absent or if it\'s present but fully charged and not discharging.      
    args:
      - item
  - name: pid_chroot
    desc: |-
      Directory used as rootdirectory by the process (this will be
      "/" unless the process did a chroot syscall).      
    args:
      - pid
  - name: pid_cmdline
    desc: Command line this process was invoked with.
    args:
      - pid
  - name: pid_cwd
    desc: Current working directory of the process.
    args:
      - pid
  - name: pid_egid
    desc: The effective gid of the process.
    args:
      - pid
  - name: pid_environ
    desc: Contents of a environment-var of the process.
    args:
      - pid
      - varname
  - name: pid_environ_list
    desc: List of environment-vars that the process can see.
    args:
      - pid
  - name: pid_euid
    desc: The effective uid of the process.
    args:
      - pid
  - name: pid_exe
    desc: Path to executed command that started the process.
    args:
      - pid
  - name: pid_fsgid
    desc: The file system gid of the process.
    args:
      - pid
  - name: pid_fsuid
    desc: The file system uid of the process.
    args:
      - pid
  - name: pid_gid
    desc: The real gid of the process.
    args:
      - pid
  - name: pid_nice
    desc: The nice value of the process.
    args:
      - pid
  - name: pid_openfiles
    desc: List of files that the process has open.
    args:
      - pid
  - name: pid_parent
    desc: The pid of the parent of the process.
    args:
      - pid
  - name: pid_priority
    desc: |-
      The priority of the process (see 'priority' in "man 5
      proc").      
    args:
      - pid
  - name: pid_read
    desc: Total number of bytes read by the process.
    args:
      - pid
  - name: pid_sgid
    desc: The saved set gid of the process.
    args:
      - pid
  - name: pid_state
    desc: State of the process.
    args:
      - pid
  - name: pid_state_short
    desc: |-
      One of the chars in "RSDZTW" representing the state of the
      process where R is running, S is sleeping in an interruptible wait, D
      is waiting in uninterruptible disk sleep, Z is zombie, T is traced or
      stopped (on a signal), and W is paging.      
    args:
      - pid
  - name: pid_stderr
    desc: Filedescriptor binded to the STDERR of the process.
    args:
      - pid
  - name: pid_stdin
    desc: Filedescriptor binded to the STDIN of the process.
    args:
      - pid
  - name: pid_stdout
    desc: Filedescriptor binded to the STDOUT of the process.
    args:
      - pid
  - name: pid_suid
    desc: The saved set uid of the process.
    args:
      - pid
  - name: pid_thread_list
    desc: List with pid's from threads from this process.
    args:
      - pid
  - name: pid_threads
    desc: Number of threads in process containing this thread.
    args:
      - pid
  - name: pid_time
    desc: Sum of $pid_time_kernelmode and $pid_time_usermode.
    args:
      - pid
  - name: pid_time_kernelmode
    desc: |-
      Amount of time that the process has been scheduled in kernel
      mode in seconds.      
    args:
      - pid
  - name: pid_time_usermode
    desc: |-
      Amount of time that the process has been scheduled in user
      mode in seconds.      
    args:
      - pid
  - name: pid_uid
    desc: The real uid of the process.
    args:
      - pid
  - name: pid_vmdata
    desc: Data segment size of the process.
    args:
      - pid
  - name: pid_vmexe
    desc: Text segment size of the process.
    args:
      - pid
  - name: pid_vmhwm
    desc: Peak resident set size ("high water mark") of the process.
    args:
      - pid
  - name: pid_vmlck
    desc: Locked memory size of the process.
    args:
      - pid
  - name: pid_vmlib
    desc: Shared library code size of the process.
    args:
      - pid
  - name: pid_vmpeak
    desc: Peak virtual memory size of the process.
    args:
      - pid
  - name: pid_vmpte
    desc: Page table entries size of the process.
    args:
      - pid
  - name: pid_vmrss
    desc: Resident set size of the process.
    args:
      - pid
  - name: pid_vmsize
    desc: Virtual memory size of the process.
    args:
      - pid
  - name: pid_vmstk
    desc: Stack segment size of the process.
    args:
      - pid
  - name: pid_write
    desc: Total number of bytes written by the process.
    args:
      - pid
  - name: platform
    desc: |-
      Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you
      have only one platform device. Platform type is either `in` or `vol` meaning
      voltage; `fan` meaning fan; `temp` meaning temperature. Parameter n is
      number of the sensor. See `/sys/bus/platform/devices/` on your local
      computer. The optional arguments `factor` and `offset` allow precalculation
      of the raw input, which is being modified as follows: `input = input *
      factor + offset`. Note that they have to be given as decimal values (i.e.
      contain at least one decimal place).      
    args:
      - (dev)
      - type
      - n
      - (factor offset)
  - name: pop3_unseen
    desc: |-
      Displays the number of unseen messages in your global POP3
      inbox by default. You can define individual POP3 inboxes separately by
      passing arguments to this object. Arguments are: "host user pass [-i
      interval (in seconds)] [-p port] [-e 'command'] [-r retries]". Default
      port is 110, default interval is 5 minutes, and default number of
      retries before giving up is 5. If the password is supplied as '*', you
      will be prompted to enter the password when Conky starts.      
    args:
      - (args)
  - name: pop3_used
    desc: |-
      Displays the amount of space (in MiB, 2^20) used in your
      global POP3 inbox by default. You can define individual POP3 inboxes
      separately by passing arguments to this object. Arguments are: "host
      user pass [-i interval (in seconds)] [-p port] [-e 'command'] [-r
      retries]". Default port is 110, default interval is 5 minutes, and
      default number of retries before giving up is 5. If the password is
      supplied as '*', you will be prompted to enter the password when Conky
      starts.      
    args:
      - (args)
  - name: processes
    desc: Total processes (sleeping and running).
  - name: read_tcp
    desc: |-
      Connects to a tcp port on a host (default is localhost),
      reads every char available at the moment and shows them.      
    args:
      - (host)
      - port
  - name: read_udp
    desc: |-
      Connects to a udp port on a host (default is localhost),
      reads every char available at the moment and shows them.      
    args:
      - (host)
      - port
  - name: replied_mails
    desc: |-
      Number of mails marked as replied in the specified mailbox
      or mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: rss
    desc: |-
      Download and parse RSS feeds. The interval may be a
      (floating point) value greater than 0. Action may be one of the
      following: feed_title, item_title (with num par), item_desc (with num
      par) and item_titles (when using this action and spaces_in_front is
      given conky places that many spaces in front of each item). This
      object is threaded, and once a thread is created it can't be
      explicitly destroyed. One thread will run for each URI specified. You
      can use any protocol that Curl supports.      
    args:
      - uri
      - interval_in_seconds
      - action
      - (num_par (spaces_in_front))
  - name: rstrip
    desc: Strips all trailing whitespace from input.
    args:
      - text
  - name: running_processes
    desc: Running processes (not sleeping). Requires Linux 2.6.
  - name: running_threads
    desc: Number of running (runnable) threads. Linux only.
  - name: scroll
    desc: |-
      Scroll 'text' by 'step' characters to the left or right (set
      'direction' to 'left' or 'right' or 'wait') showing 'length' number of
      characters at the same time. The text may also contain variables.
      'step' is optional and defaults to 1 if not set. 'direction' is
      optional and defaults to left if not set. When direction is 'wait'
      then text will scroll left and wait for 'interval' itertations at the
      beginning and end of the text. If a var creates output on multiple
      lines then the lines are placed behind each other separated with a
      '|'-sign. If you change the textcolor inside $scroll it will
      automatically have it's old value back at the end of $scroll. The end
      and the start of text will be separated by 'length' number of spaces
      unless direction is 'wait'.      
    args:
      - (direction)
      - length
      - (step)
      - (interval)
      - text
  - name: seen_mails
    desc: |-
      Number of mails marked as seen in the specified mailbox or
      mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: shadecolor
    desc: Change shading color.
    args:
      - (color)
  - name: shmem
    desc: Amount of shared memory. Linux only.
  - name: sip_status
    desc: |-
      Prints info regarding System Integrity Protection (SIP) on
      macOS. If no switch is provided, prints SIP status (enabled /
      disabled), else, status of the specific SIP feature corresponding to
      the switch provided.

      Below are shown the available switches:

      | SWITCH | RESULT                      | STATUS |
      |--------|-----------------------------|--------|
      | 0      | apple internal              | YES/NO |
      | 1      | forbid untrusted kexts      | YES/NO |
      | 2      | forbid task-for-pid         | YES/NO |
      | 3      | restrict filesystem         | YES/NO |
      | 4      | forbid kernel-debugger      | YES/NO |
      | 5      | restrict dtrace             | YES/NO |
      | 6      | restrict nvram              | YES/NO |
      | 7      | forbid device-configuration | YES/NO |
      | 8      | forbid any-recovery-os      | YES/NO |
      | 9      | forbid user-approved-kexts  | YES/NO |

      uses unsupported configuration?: If yes, prints "unsupported
      configuration, beware!" Else, prints "configuration is ok".

      USAGE:
      ```
      $ conky -t '${sip_status}'
      # print SIP status
      $ conky -t '${sip_status 0}'
      # print allows apple-internal? Yes or No?
      ```

      NOTES:

      * Available for all macOS versions (even the ones prior El Capitan where
      SIP was first introduced)
      * If run on versions prior El Capitan SIP is unavailable, so all you will
      get is "unsupported".      
    args:
      - (switch)
  - name: smapi
    desc: |-
      When using smapi, display contents of the `/sys/devices/platform/smapi`
      directory. ARGS are either `(FILENAME)` or `bat (INDEX) (FILENAME)` to
      display the corresponding files' content. This is a very raw method of
      accessing the smapi values. When available, better use one of the smapi_*
      variables instead.      
    args:
      - (ARGS)
  - name: smapi_bat_bar
    desc: |-
      when using smapi, display the remaining capacity of the
      battery with index INDEX as a bar.      
    args:
      - (INDEX),(height),(width)
  - name: smapi_bat_perc
    desc: |-
      when using smapi, display the remaining capacity in percent
      of the battery with index INDEX. This is a separate variable because
      it supports the 'use_spacer' configuration option.      
    args:
      - (INDEX)
  - name: smapi_bat_power
    desc: |-
      when using smapi, display the current power of the battery
      with index INDEX in watt. This is a separate variable because the
      original read out value is being converted from mW. The sign of the
      output reflects charging (positive) or discharging (negative) state.      
    args:
      - INDEX
  - name: smapi_bat_temp
    desc: |-
      when using smapi, display the current temperature of the
      battery with index INDEX in degree Celsius. This is a separate
      variable because the original read out value is being converted from
      milli degree Celsius.      
    args:
      - INDEX
  - name: sony_fanspeed
    desc: |-
      Displays the Sony VAIO fanspeed information if sony-laptop
      kernel support is enabled. Linux only.      
  - name: startcase
    desc: Capitalises the start of each word.
    args:
      - text
  - name: stippled_hr
    desc: Stippled (dashed) horizontal line.
    args:
      - (space)
  - name: stock
    desc: |-
      Displays the data of a stock symbol. The following data is
      supported: adv(Average Daily Volume), ask, asksize, bid, askrt(ask
      realtime), bidrt(bid realtime), bookvalue, bidsize, change,
      commission, changert(change realtime), ahcrt(After Hours Change
      realtime), ds(dividend/share), ltd(Last Trade Date), tradedate,
      es(earnings/share), ei(error indication), epsecy(EPS Estimate Current
      Year), epseny(EPS Estimate Next Year), epsenq(EPS Estimate Next
      Quarter), floatshares, dayslow, dayshigh, 52weeklow, 52weekhigh,
      hgp(Holdings Gain Percent), ag(Annualized Gain), hg(Holdings Gain),
      hgprt(Holdings Gain Percent realtime), hgrt(Holdings Gain realtime),
      moreinfo, obrt(Order Book realtime), mc(Market Capitalization),
      mcrt(Market Cap realtime), ebitda, c52wlow(Change From 52-week Low),
      pc52wlow(Percent Change From 52-week Low), cprt(change percent
      realtime), lts(Last Trade Size), c52whigh(Change from 52-week high),
      pc52whigh(percent change from 52-week high), ltp(last trade price),
      hl(high limit), ll(low limit), dr(day's range), drrt(day's range
      realtime), 50ma(50-day Moving Average), 200ma(200-day Moving Average),
      c200ma(Change From 200-day Moving Average), pc200ma(Percent Change
      From 200-day Moving Average), c50ma(Change From 50-day Moving
      Average), pc50ma(Percent Change From 50-day Moving Average), name,
      notes, open, pc(previous close), pricepaid, cip(change in percent),
      ps(price/sales), pb(price/book), edv(Ex-Dividend Date), per(P/E
      Ratio), dpd(Dividend Pay Date), perrt(P/E Ratio realtime), pegr(PEG
      Ratio), pepsecy(Price/EPS Estimate Current Year), pepseny(Price/EPS
      Estimate Next Year), symbol, sharesowned, shortratio, ltt(Last Trade
      Time), tradelinks, tt(Ticker Trend), 1ytp(1 yr Target Price), volume,
      hv(Holdings Value), hvrt(Holdings Value realtime), 52weekrange,
      dvc(Day's Value Change), dvcrt(Day's Value Change realtime), se(Stock
      Exchange), dy(Dividend Yield).      
    args:
      - symbol
      - data
  - name: swap
    desc: Amount of swap in use.
  - name: swapbar
    desc: Bar that shows amount of swap in use.
    args:
      - (height),(width)
  - name: swapfree
    desc: Amount of free swap.
  - name: swapmax
    desc: Total amount of swap.
  - name: swapperc
    desc: Percentage of swap in use.
  - name: sysctlbyname
    desc: Print sysctl value by name. FreeBSD only.
    args:
      - (name)
  - name: sysname
    desc: System name, e.g. Linux.
  - name: tab
    desc: |-
      Puts a tab of the specified width, starting from column
      'start'. The unit is pixels for both arguments.      
    args:
      - (width, (start))
  - name: tail
    desc: |-
      Displays last N lines of supplied text file. The file is
      checked every 'next_check' update. If next_check is not supplied,
      Conky defaults to 2. Max of 30 lines can be displayed, or until the
      text buffer is filled.      
    args:
      - logfile
      - lines
      - (next_check)
  - name: tcp_ping
    desc: |-
      Displays the number of microseconds it takes to get a reply
      on a ping to to tcp 'port' on 'host'. 'port' is optional and has 80 as
      default. This works on both open and closed ports, just make sure that
      the port is not behind a firewall or you will get 'down' as answer.
      It's best to test a closed port instead of an open port, you will get
      a quicker response.      
    args:
      - host
      - (port)
  - name: tcp_portmon
    desc: |-
      TCP port (both IPv6 and IPv4) monitor for specified local ports.
      Port numbers must be in the range 1 to 65535. Valid items are:

      **count** **Total number of connections in the range**
      **rip** **Remote ip address**
      **rhost** **Remote host name**
      **rport** **Remote port number**
      **rservice** **Remote service name from /etc/services**
      **lip** **Local ip address**
      **lhost** **Local host name**
      **lport** **Local port number**
      **lservice** **Local service name from /etc/services**

      The connection index provides you with access to each connection in the
      port monitor. The monitor will return information for index values from
      0 to n-1 connections. Values higher than n-1 are simply ignored. For the
      \"count\" item, the connection index must be omitted. It is required for
      all other items.

      Examples:

      **\${tcp_portmon 6881 6999 count}** **Displays the number of connections
      in the** bittorrent port range
      **\${tcp_portmon 22 22 rip 0}** **Displays the remote host ip of the
      first sshd** connection
      **\${tcp_portmon 22 22 rip 9}** **Displays the remote host ip of the
      tenth sshd** connection
      **\${tcp_portmon 1 1024 rhost 0}** **Displays the remote host name of
      the first** connection on a privileged port
      **\${tcp_portmon 1 1024 rport 4}** **Displays the remote host port of
      the fifth** connection on a privileged port
      **\${tcp_portmon 1 65535 lservice 14}** **Displays the local service
      name of the fifteenth** connection in the range of all ports

      Note that port monitor variables which share the same port range
      actually refer to the same monitor, so many references to a single port
      range for different items and different indexes all use the same monitor
      internally. In other words, the program avoids creating redundant
      monitors.      
    args:
      - port_begin
      - port_end
      - item
      - (index)
  - name: templateN
    desc: |-
      Evaluate the content of the templateN configuration variable (where
      N is a value between 0 and 9, inclusively), applying substitutions
      as described in the documentation of the corresponding configuration
      variable. The number of arguments is optional, but must match the
      highest referred index in the template. You can use the same special
      sequences in each argument as the ones valid for a template
      definition, e.g. to allow an argument to contain a whitespace. Also
      simple nesting of templates is possible this way.

      Here are some examples of template definitions, note they are placed
      between \[\[ \... \]\] instead of \' \... \':

      template0 = \[\[\$\\1\\2\]\]\
      template1 = \[\[\\1: \${fs_used \\2} / \${fs_size \\2}\]\]\
      template2 = \[\[\\1 \\2\]\]

      The following list shows sample usage of the templates defined above,
      with the equivalent syntax when not using any template at all:

        --------------------------------------------- ------------------------------------------
        using template                                same without template
        \${template0 node name}                       \$nodename
        \${template1 root /}                          root: \${fs_free /} / \${fs_size /}
        \${template1 \${template2\\ disk\\ root} /}   disk root: \${fs_free /} / \${fs_size /}
        --------------------------------------------- ------------------------------------------      
    args:
      - (arg1)
      - (arg2)
      - (arg3 ...)
  - name: texeci
    desc: |-
      Runs a command at an interval inside a thread and displays
      the output. Same as $execi, except the command is run inside a thread.
      Use this if you have a slow script to keep Conky updating. You should
      make the interval slightly longer than the time it takes your script
      to execute. For example, if you have a script that take 5 seconds to
      execute, you should make the interval at least 6 seconds. See also
      $execi. This object will clean up the thread when it is destroyed, so
      it can safely be used in a nested fashion, though it may not produce
      the desired behaviour if used this way.      
    args:
      - interval
      - command
  - name: texecpi
    desc: Same as execpi, except the command is run inside a thread.
    args:
      - interval
      - command
  - name: threads
    desc: Total threads.
  - name: time
    desc: |-
      Local time, see "man strftime" to get more information about
      format.      
    args:
      - (format)
  - name: to_bytes
    desc: |-
      If 'size' is a number followed by a size-unit
      (kilobyte,mb,GiB,...) then it converts the size to bytes and shows it
      without unit, otherwise it just shows 'size'.      
    args:
      - size
  - name: top
    desc: |-
      This takes arguments in the form:top (name) (number)
      Basically, processes are ranked from highest to lowest in terms of cpu
      usage, which is what (num) represents. The types are: "name", "pid",
      "cpu", "mem", "mem_res", "mem_vsize", "time", "uid", "user",
      "io_perc", "io_read" and "io_write". There can be a max of 10
      processes listed.      
    args:
      - type
      - num
  - name: top_io
    desc: |-
      Same as top, except sorted by the amount of I/O the process
      has done during the update interval.      
    args:
      - type
      - num
  - name: top_mem
    desc: Same as top, except sorted by mem usage instead of cpu.
    args:
      - type
      - num
  - name: top_time
    desc: |-
      Same as top, except sorted by total CPU time instead of
      current CPU usage.      
    args:
      - type
      - num
  - name: totaldown
    desc: |-
      Total download, overflows at 4 GB on Linux with 32-bit arch
      and there doesn't seem to be a way to know how many times it has
      already done that before conky has started.      
    args:
      - (net)
  - name: totalup
    desc: Total upload, this one too, may overflow.
    args:
      - (net)
  - name: trashed_mails
    desc: |-
      Number of mails marked as trashed in the specified mailbox
      or mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: tztime
    desc: |-
      Local time for specified timezone, see man strftime to get
      more information about format. The timezone argument is specified in
      similar fashion as TZ environment variable. For hints, look in
      /usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc.      
    args:
      - (timezone
      - (format))
  - name: uid_name
    desc: Username of user with this uid.
    args:
      - uid
  - name: unflagged_mails
    desc: |-
      Number of mails not marked as flagged in the specified
      mailbox or mail spool if not. Only maildir type mailboxes are
      supported, mbox type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: unforwarded_mails
    desc: |-
      Number of mails not marked as forwarded in the specified
      mailbox or mail spool if not. Only maildir type mailboxes are
      supported, mbox type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: unreplied_mails
    desc: |-
      Number of mails not marked as replied in the specified
      mailbox or mail spool if not. Only maildir type mailboxes are
      supported, mbox type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: unseen_mails
    desc: |-
      Number of new or unseen mails in the specified mailbox or
      mail spool if not. Only maildir type mailboxes are supported, mbox
      type will return -1.      
    args:
      - (maildir)
      - (interval)
  - name: updates
    desc: for debugging.
    args:
      - Number
      - of
      - updates
  - name: uppercase
    desc: Converts all letters into uppercase.
    args:
      - text
  - name: upspeed
    desc: Upload speed in suitable IEC units.
    args:
      - (net)
  - name: upspeedf
    desc: Upload speed in KiB with one decimal.
    args:
      - (net)
  - name: upspeedgraph
    desc: |-
      Upload speed graph, colours defined in hex, minus the #. If
      scale is non-zero, it becomes the scale for the graph. Uses a
      logarithmic scale (to see small numbers) when you use the -l switch.
      Takes the switch '-t' to use a temperature gradient, which makes the
      gradient values change depending on the amplitude of a particular
      graph value (try it and see).      
    args:
      - (netdev)
      - (height),(width)
      - (gradient colour 1)
      - (gradient colour 2)
      - (scale)
      - (-t)
      - (-l)
  - name: uptime
    desc: Uptime.
  - name: uptime_short
    desc: Uptime in a shorter format.
  - name: user_names
    desc: Lists the names of the users logged in.
  - name: user_number
    desc: Number of users logged in.
  - name: user_terms
    desc: Lists the consoles in use.
  - name: user_time
    desc: |-
      Lists how long the user for the given console has been
      logged in for.      
    args:
      - console
  - name: user_times
    desc: Lists how long users have been logged in for.
  - name: utime
    desc: Display time in UTC (universal coordinate time).
    args:
      - (format)
  - name: v6addrs
    desc: |-
      IPv6 addresses for an interface, followed by netmask if -n
      is specified and scope with -s. Scopes are Global(G), Host-local(H),
      Link-local(L), Site-local(S), Compat(C) and Unspecified(/). Linux
      only.      
    args:
      - (-n)
      - (-s)
      - (interface)
  - name: version
    desc: Git version number. DragonFly only.
  - name: voffset
    desc: |-
      Change vertical offset by N pixels. Negative values will
      cause text to overlap. See also $offset.      
    args:
      - (pixels)
  - name: voltage_mv
    desc: |-
      Returns CPU #n's voltage in mV. CPUs are counted from 1.      
    default: 1
    args:
      - (n)
  - name: voltage_v
    desc: |-
      Returns CPU #n's voltage in V. CPUs are counted from 1.      
    default: 1
    args:
      - (n)
  - name: weather
    desc: |-
      This feature is currently unimplemented.

      Download, parse and display METAR data.

      \'URI\' must be a valid METAR URI.

      http://tgftp.nws.noaa.gov/data/observations/metar/stations/

      \'locID\' must be a valid location identifier for the required uri. For
      the NOAA site this must be a valid ICAO (see for instance
      *https://pilotweb.nas.faa.gov/qryhtml/icao/*). For the weather.com site
      this must be a valid location ID (see for instance
      *http://aspnetresources.com/tools/locid.aspx*).

      \'data_type\' must be one of the following:

      **last_update** The date and time stamp of the data. The result depends
      on the URI used. For the NOAA site it is date (yyyy/mm/dd) and UTC time.
      For the weather.com one it is date (\[m\]m/\[d\]d/yy) and Local Time of
      the station.\
      **temperature**

      Air temperature (you can use the \'temperature_unit\' config setting to
      change units)\
      **cloud_cover**

      The highest cloud cover status\
      **pressure**

      Air pressure in millibar\
      **wind_speed**

      Wind speed in km/h\
      **wind_dir**

      Wind direction\
      **wind_dir_DEG**

      Compass wind direction\
      **humidity**

      Relative humidity in %\
      **weather**

      Any relevant weather event (rain, snow, etc.). This is not used if you
      are querying the weather.com site since this data is aggregated into the
      cloud_cover one\
      **icon**

      Weather icon (only for www.weather.com). Can be used together with the
      icon kit provided upon registering to their service.

      \'delay_in_minutes\' (optional, default 30) cannot be less than 30
      minutes.

      This object is threaded, and once a thread is created it can\'t be
      explicitly destroyed. One thread will run for each URI specified.

      Note that these variables are still EXPERIMENTAL and can be subject to
      many future changes.      
    args:
      - URI
      - locID
      - data_type
      - (interval_in_minutes)
  - name: weather_forecast
    desc: |-
      This feature is currently unimplemented.

      Download, parse and display weather forecast data for a given day
      (daytime only).

      \'locID\', see \'weather\' above.

      \'day\' is a number from 0 (today) to 4 (3 days after tomorrow).

      \'data_type\' must be one of the following:

      **day** **Day of the week**\
      **date** **Date, in the form MMM DD (ie. Jul 14)**\
      **low** **Minimum temperature (you can use the** \'temperature_unit\'
      config setting to change units)\
      **hi** **Maximum temperature (you can use the** \'temperature_unit\'
      config setting to change units)\
      **icon** **Weather icon. Can be used together with the icon** kit
      provided upon registering to the weather.com service\
      **forecast** **Weather forecast (sunny, rainy, etc.)**\
      **wind_speed** **Wind speed in km/h**\
      **wind_dir** **Wind direction**\
      **wind_dir_DEG** **Compass wind direction**\
      **humidity** **Relative humidity in %**\
      **precipitation** **Probability of having a precipitation (in** %)

      \'delay_in_minutes\' (optional, default 210) cannot be lower than 210
      min.

      This object is threaded, and once a thread is created it can\'t be
      explicitly destroyed. One thread will run for each URI specified. You
      can use any protocol that Curl supports.

      Note that these variables are still EXPERIMENTAL and can be subject to
      many future changes.      
    args:
      - URI
      - locID
      - day
      - data_type
      - (interval_in_minutes)
  - name: wireless_ap
    desc: Wireless access point MAC address. Linux only.
    args:
      - (net)
  - name: wireless_bitrate
    desc: Wireless bitrate (ie 11 Mb/s). Linux only.
    args:
      - (net)
  - name: wireless_channel
    desc: WLAN channel on which device 'net' is listening.
    args:
      - (net)
  - name: wireless_essid
    desc: Wireless access point ESSID. Linux only.
    args:
      - (net)
  - name: wireless_freq
    desc: Frequency on which device 'net' is listening.
    args:
      - (net)
  - name: wireless_link_bar
    desc: Wireless link quality bar. Linux only.
    args:
      - (height),(width)
      - (net)
  - name: wireless_link_qual
    desc: Wireless link quality. Linux only.
    args:
      - (net)
  - name: wireless_link_qual_max
    desc: Wireless link quality maximum value. Linux only.
    args:
      - (net)
  - name: wireless_link_qual_perc
    desc: Wireless link quality in percents. Linux only.
    args:
      - (net)
  - name: wireless_mode
    desc: Wireless mode (Managed/Ad-Hoc/Master). Linux only.
    args:
      - (net)
  - name: words
    desc: Displays the number of words in the given file.
    args:
      - textfile
  - name: xmms2_album
    desc: Album in current XMMS2 song.
  - name: xmms2_artist
    desc: Artist in current XMMS2 song.
  - name: xmms2_bar
    desc: Bar of XMMS2's progress.
    args:
      - (height),(width)
  - name: xmms2_bitrate
    desc: Bitrate of current song.
  - name: xmms2_comment
    desc: Comment in current XMMS2 song.
  - name: xmms2_date
    desc: Returns song's date.
  - name: xmms2_duration
    desc: Duration of current song.
  - name: xmms2_elapsed
    desc: Song's elapsed time.
  - name: xmms2_genre
    desc: Genre in current XMMS2 song.
  - name: xmms2_id
    desc: XMMS2 id of current song.
  - name: xmms2_percent
    desc: Percent of song's progress.
  - name: xmms2_playlist
    desc: Returns the XMMS2 playlist.
  - name: xmms2_size
    desc: Size of current song.
  - name: xmms2_smart
    desc: |-
      Prints the song name in either the form "artist - title" or
      file name, depending on whats available.      
  - name: xmms2_status
    desc: XMMS2 status (Playing, Paused, Stopped, or Disconnected).
  - name: xmms2_timesplayed
    desc: Number of times a song was played (presumably).
  - name: xmms2_title
    desc: Title in current XMMS2 song.
  - name: xmms2_tracknr
    desc: Track number in current XMMS2 song.
  - name: xmms2_url
    desc: Full path to current song.