Secara bawaan, starship mencatat peringatan dan eror ke dalam sebuah file bernama `~/.cache/starship/session_${STARSHIP_SESSION_KEY}.log`, yang mana session key file tersebut sama dengan instance terminalmu. Namun, hal tersebut dapat diubah dengan menggunakan environment variable dari `STARSHIP_CACHE` berikut:
```sh
export STARSHIP_CONFIG=~/.starship/cache
```
Pada PowerShell (Windows), tambahkan baris berikut pada `$PROFILE`:
```powershell
$ENV:STARSHIP_CACHE = "$HOME\AppData\Local\Temp"
```
### Terminologi
**Modul**: Sebuah komponen pada prompt yang memberikan informasi berdasarkan info kontekstual sistem operasimu. Sebagai contoh, modul "nodejs" menampilkan versi Node.js yang tengah terpasang pada komputermu, jika direktorimu sedang berada pada proyek Node.js.
**Variabel**: Sub-komponen yang terdiri dari informasi yang disediakan oleh modul. Sebagai contoh, variabel "version" dalam modul "nodejs" memuat versi Node.js saat ini.
Secara konvensi, sebagian modul memiliki prefiks bawaan pada warna terminal (mis. `via` pada "nodejs") dan juga sebuah ruang kosong sebagai sufiks.
### Format String
Format string merupakan format yang sebuah modul gunakan untuk menampilkan semua variabelnya. Sebagian besar modul memiliki sebuah entri yang disebut `format` yang mengkonfigurasi format tampilan pada modul. Kamu bisa menggunakan teks, variabel, dan grup teks di dalam sebuah format string.
#### Variabel
Variabel memilki simbol `$` yang diikuti dengan nama variabelnya. Nama dari sebuah variabel hanya boleh berisikan huruf, angka, dan `_`.
Sebagai contoh:
-`$version` adalah format string dengan sebuah nama variabel `version`.
-`$git_branch$git_commit` merupakan sebuah format string dengan dua variabel bernama `git_branch` dan `git_commit`.
-`$git_branch $git_commit` memiliki dua variabel yang dipisahkan dengan sebuah spasi.
#### Grup Teks
Grup teks dibuat dengan dua bagian yang berbeda.
Bagian pertama, yang mana diapit dalam sebuah `[]`, merupakan sebuah [format string](#format-strings). Kamu bisa menambahkan teks, variabel, atau bahkan grup teks bercabang di dalamnya.
Pada bagian kedua, yang mana diapit dalam sebuah `()`, merupakan sebuah [penataan string](#style-strings). Bagian ini dapat digunakan untuk menata bagian pertama.
Sebagai contoh:
-`[on](red bold)` akan menampilkan string `on` dengan teks merah tebal.
-`[⌘ $version](bold green)` akan menampilkan simbol `⌘` yang diikuti oleh variabel yang berisikan `version`, dengan teks tebal berwarna hijau.
-`[a [b](red) c](green)` akan menampilkan `a b c` dengan `b` merah, dan `a`&`c` green.
#### Menata String
Sebagian besar modul starship memungkinkan kamu untuk mengkonfigurasi gaya tampilannya. Hal ini dilakukan dengan sebuah entri (biasanya `style`) yang konfigurasinya ditentukan oleh string. Berikut adalah beberapa contoh penataan pada string dan kegunaannya. Untuk detail sintaksis yang lebih lengkap, lihat [panduan konfigurasi lanjutan](/advanced-config/).
-`"fg:green bg:blue"` mengeset teks berwana hijau pada latar biru
-`"bg:blue fg:bright-green"` mengeset teks hijau terang pada latar biru
-`"bold fg:27"` mengeset tebal teks dengan [ANSI color](https://i.stack.imgur.com/KTSQa.png) 27
-`"underline bg:#bf5700"` mengeset teks bergaris bawah pada latar oranye menyala
-`""` secara eksplisit menonaktifkan semua penataan gaya
Perhatikan bagaimana nantinya penataanmu akan terlihat pada emulator terminalmu. Sebagai contoh, beberapa terminal emulator alih-alih membuat warnanya lebih terang, malah menebalkan teksnya, dan sebagian palet warna ada yang menggunakan nilai yang sama untuk warna normal dan terangnya. Dan juga, untuk memakai teks miring, terminalmu harus menunjang teks miring.
#### Format String Bersyarat (Conditional)
String dengan format bersyarat dibungkus dengan `(` dan `)` tidak akan dijalankan jika variabel di dalamnya kosong.
Sebagai contoh:
-`(@$region)` tidak akan menampilkan apapun jika nilai variabel `region` adalah `None` atau berupa string kosong, jika tidak, `@` diikuti dengan nilai dari region.
-`(sembarang)` akan selalu tidak menampilkan apapun karena tidak ada variabel yang dibungkus dalam kurung kurawal.
- Tatkala `$all` digunakan sebagai shortcut untuk `\[$a$b\]`, `($all)` tidak akan menampilkan apapun jika nilai `$a` dan `$b` adalah `None`. Berlaku juga dengan `(\[$a$b\] )`.
#### Karakter Yang Bisa Dihindari (Escapable)
Simbol-simbol berikut mempunyai kegunaan yang spesial dalam format srting. Jika kamu ingin menampilkan simbol-simbol berikut, kamu harus mengikatnya (escape) dengan garis miring terbalik (`\`).
- \$
- \\
- [
- ]
- (
- )
Perhatikan bahwa `toml` memiliki [sintaksi bebasnya sendiri](https://github.com/toml-lang/toml#user-content-string). Disarankan halnya untukmu menggunakan string literal (`''`) dalam konfigurasimu. Jika kamu mau memakai string standar (`""`), ingatlah untuk mengikat garis miring terbalik `\`.
Sebagai contoh, ketika kamu ingin menampilkan simbol `$` pada baris baru, konfigurasi berikut untuk `format` bersifat ekuivalen:
```toml
# dengan string standar
format = "\n\\$"
# dengan string standar multibaris
format = """
\\$"""
# dengan string literal
format = '''
\$'''
```
## Prompt
Berikut adalah opsi konfigurasi dari list yang bersifat prompt-wide.
| `fromat` | [link](#default-prompt-format) | Mengkonfigurasi format pada prompt. |
| `scan_timeout` | `30` | Batas waktu starpship untuk memindai file (dalam milidetik). |
| `command_timeout` | `500` | Batas waktu untuk perintah yang dieksekusi oleh starship (dalam militdetik). |
| `add_newline` | `true` | Memasukkan baris kosong antara prompt shell. |
### Contoh
```toml
# ~/.config/starship.toml
# Menggunakan format yang dikustomisasi
format = """
[┌───────────────────>](bold green)
[│](bold green)$directory$rust$package
[└─>](bold green) """
# Menunggu 10 milidetik untuk starship mencek file pada direktori terkini.
scan_timeout = 10
# Menonaktifkan baris kosong di awal prompt
add_newline = false
```
### Format Prompt Bawaan
Aturan `format` bawaan digunakan untuk mendefinisikan format pada prompt, apabila kosong atau tidak ada `format` yang diberikan. Aturannya seperti yang ditunjukkan:
```toml
format = "$all"
# yang mana ekuivalen dengan
format = """
$username\
$hostname\
$shlvl\
$kubernetes\
$directory\
$vcsh\
$git_branch\
$git_commit\
$git_state\
$git_metrics\
$git_status\
$hg_branch\
$docker_context\
$package\
$cmake\
$dart\
$deno\
$dotnet\
$elixir\
$elm\
$erlang\
$golang\
$helm\
$java\
$julia\
$kotlin\
$nim\
$nodejs\
$ocaml\
$perl\
$php\
$purescript\
$python\
$red\
$ruby\
$rust\
$scala\
$swift\
$terraform\
$vlang\
$vagrant\
$zig\
$nix_shell\
$conda\
$memory_usage\
$aws\
$gcloud\
$openstack\
$env_var\
$crystal\
$custom\
$cmd_duration\
$line_break\
$lua\
$jobs\
$battery\
$time\
$status\
$shell\
$character"""
```
## AWS
Module `aws` menampilkan region dan profil AWS terkini. Diperoleh dari variabel environment `AWS_REGION`, `AWS_DEFAULT_REGION`, dan `AWS_PROFILE` pada file `~/.aws/config`. Modul ini juga menampilkan penghitung waktu mundur kedaluwarsa ketika menggunakan temporer kredensial.
Ketika menggunakan [aws-vault](https://github.com/99designs/aws-vault), profil dibaca dari variabel environment `AWS_VAULT` dan tanggal kedaluwarsanya dibaca dari variabel environment `AWS_SESSION_EXPIRATION`.
Ketika menggunakan [awsu](https://github.com/kreuzwerker/awsu) profil dibaca dari variabel environment `AWSU_PROFILE`.
Ketika menggunakan [AWSume](https://awsu.me) profil dibaca dari variabel environment `AWSUME_PROFILE` dan tanggal kedaluwarsanya dibaca dari variabel environment `AWSUME_EXPIRATION`.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
#### Menampilkan semuanya
```toml
# ~/.config/starship.toml
[aws]
format = 'on [$symbol($profile )(\($region\) )]($style)'
style = "bold blue"
symbol = "🅰 "
[aws.region_aliases]
ap-southeast-2 = "au"
us-east-1 = "va"
```
#### Menampilkan region
```toml
# ~/.config/starship.toml
[aws]
format = "on [$symbol$region]($style) "
style = "bold blue"
symbol = "🅰 "
[aws.region_aliases]
ap-southeast-2 = "au"
us-east-1 = "va"
```
#### Menampilkan profil
```toml
# ~/.config/starship.toml
[aws]
format = "on [$symbol$profile]($style) "
style = "bold blue"
symbol = "🅰 "
```
## Baterai
Modul `battery` menampilkan seberapa penuh baterai piranti terisi dan status pengisiannya. Modulnya hanya dapat terlihat ketika baterai dari pirantinya di bawah 10%.
| `full_symbol` | `" "` | Simbol dimunculkan ketika baterai penuh. |
| `charging_symbol` | `" "` | Simbol dimunculkan ketika baterai mengisi. |
| `discharging_symbol` | `" "` | Simbol dimunculkan ketika baterai terpakai. |
| `unknown_symbol` | `" "` | Simbol dimunculkan ketika keadaan baterai tidak dikenali. |
| `empty_symbol` | `" "` | Simbol dimunculkan ketika keadaan baterai kosong. |
| `format` | `"[$symbol$percentage]($style) "` | Format dari modul. |
| `display` | [link](#battery-display) | Menampilkan ambang dan gaya dari modul. |
| `disabled` | `false` | Menonaktifkan modul `baterai`. |
### Contoh
```toml
# ~/.config/starship.toml
[battery]
full_symbol = "🔋 "
charging_symbol = "⚡️ "
discharging_symbol = "💀 "
```
### Tampilan Baterai
Opsi konfigurasi `display` digunakan untuk menentukan kapan indikator baterai harus ditampilkan (threshold), simbol mana yang akan digunakan (symbol), dan bagaimana seharusnya itu terlihat (style). Jika tidak ada `display` yang diberikan. Aturannya seperti yang ditunjukkan:
```toml
[[battery.display]]
threshold = 10
style = "bold red"
```
Nilai bawaan untuk opsi `charging_symbol` dan `discharging_symbol` adalah nilai dari masing-masing opsi `charging_symbol` dan `discharging_symbol` dari nilai `battery`.
#### Opsi
Opsi dari `display` merupakan sebuah array dari tabel berikut.
| symbol | | Representasi dari `success_symbol`, `error_symbol` atau `vicmd_symbol` |
### Contoh
#### Dengan menggunakan corak eror yang dikustomisasi
```toml
# ~/.config/starship.toml
[character]
success_symbol = "[➜](bold green) "
error_symbol = "[✗](bold red) "
```
#### Tanpa menggunakan corak eror yang dikustomisasi
```toml
# ~/.config/starship.toml
[character]
success_symbol = "[➜](bold green) "
error_symbol = "[➜](bold red) "
```
#### Dengan menggunakan corak vim yang dikustomisasi
```toml
# ~/.config/starship.toml
[character]
vicmd_symbol = "[V](bold green) "
```
## CMake
Modul `cmake` menampilkan versi terkini dari [CMake](https://cmake.org/) yang terpasang. Secara bawaan, modul akan aktif jika beberapa syarat berikut telah terpenuhi:
- Direktori terkini berisikan sebuah file `CMakeLists.txt`
- Direktori terkini berisikan sebuah file `CMakeCache.txt`
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
## Command Duration
Modul `cmd_duration` menampilkan seberapa lama perintah sebelumnya membutuhkan waktu untuk dilaksanakan. Modulnya hanya akan ditampilkan jika perintahnya membutuhkan waktu lebih dari dua detik, atau ada nilai dari konfigurasi `min_time`.
::: jangan lakukan hook DEBUG trap dalam Bash
Jia kamu menjalankan Starship di `bash`, jangan lakukan hook DEBUG trap setelah menjalankan `eval $(starship init $0)`, atau modulnya **akan** rusak.
:::
Pengguna Bash yang membutuhkan fungsi seperti preexec dapat menggunakan [kerangka kerja bash_preexec dari rcaloras](https://github.com/rcaloras/bash-preexec). Cukup dengan membuat array `preexec_functions` dan `precmd_functions` sebelum menjalankan `eval $(starship init $0)`, lalu lanjutkan seperti biasa.
Menampilkan notifikasi layar memerlukan starship dikembangkan dengan dukungan dari `rust-notify`. Periksa apakah starship kamu mendukung notifikasi dengan menjalankan `STARSHIP_LOG=debug starship module cmd_duration -d 60000` ketika `show_notifications` diatur menjadi `true`.
| `truncation_length` | `1` | The number of directories the environment path should be truncated to, if the environment was created via `conda create -p [path]`. `0` means no truncation. Also see the [`directory`](#directory) module. |
| `symbol` | `"🅒 "` | The symbol used before the environment name. |
| `style` | `"bold green"` | Gaya penataan untuk modul. |
| `format` | `"via [$symbol$environment]($style) "` | Format dari modul. |
| environment | `astronauts` | The current conda environment |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[conda]
format = "[$symbol$environment](dimmed green) "
```
## Crystal
The `crystal` module shows the currently installed version of [Crystal](https://crystal-lang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `shard.yml` file
| version | `v0.32.1` | The version of `crystal` |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[crystal]
format = "via [✨ $version](bold blue) "
```
## Dart
The `dart` module shows the currently installed version of [Dart](https://dart.dev/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a file with `.dart` extension
- The current directory contains a `.dart_tool` directory
- The current directory contains a `pubspec.yaml`, `pubspec.yml` or `pubspec.lock` file
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[dart]
format = "via [🔰 $version](bold red) "
```
## Deno
The `deno` module shows you your currently installed version of [Deno](https://deno.land/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `mod.ts`, `mod.js`, `deps.ts` or `deps.js` file
The `directory` module shows the path to your current directory, truncated to three parent folders. Your directory will also be truncated to the root of the git repo that you're currently in.
When using the fish style pwd option, instead of hiding the path that is truncated, you will see a shortened name of each directory based on the number you enable for the option.
For example, given `~/Dev/Nix/nixpkgs/pkgs` where `nixpkgs` is the repo root, and the option set to `1`. You will now see `~/D/N/nixpkgs/pkgs`, whereas before it would have been `nixpkgs/pkgs`.
| `substitutions` | | A table of substitutions to be made to the path. |
| `fish_style_pwd_dir_length` | `0` | The number of characters to use when applying fish shell pwd path logic. |
| `use_logical_path` | `true` | If `true` render the logical path sourced from the shell via `PWD` or `--logical-path`. If `false` instead render the physical filesystem path with symlinks resolved. |
`substitutions` allows you to define arbitrary replacements for literal strings that occur in the path, for example long network prefixes or development directories (i.e. Java). Note that this will disable the fish style PWD.
```toml
[directory.substitutions]
"/Volumes/network/path" = "/net"
"src/com/long/java/path" = "mypath"
```
`fish_style_pwd_dir_length` interacts with the standard truncation options in a way that can be surprising at first: if it's non-zero, the components of the path that would normally be truncated are instead displayed with that many characters. For example, the path `/built/this/city/on/rock/and/roll`, which would normally be displayed as as `rock/and/roll`, would be displayed as `/b/t/c/o/rock/and/roll` with `fish_style_pwd_dir_length = 1`--the path components that would normally be removed are displayed with a single character. For `fish_style_pwd_dir_length = 2`, it would be `/bu/th/ci/on/rock/and/roll`.
| path | `"D:/Projects"` | The current directory path |
| style\* | `"black bold dimmed"` | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[directory]
truncation_length = 8
truncation_symbol = "…/"
```
## Docker Context
The `docker_context` module shows the currently active [Docker context](https://docs.docker.com/engine/context/working-with-contexts/) if it's not set to `default` or if the `DOCKER_HOST` or `DOCKER_CONTEXT` environment variables are set (as they are meant to override the context in use).
| `format` | `"via [$symbol$context]($style) "` | Format dari modul. |
| `symbol` | `"🐳 "` | The symbol used before displaying the Docker context. |
| `only_with_files` | `true` | Only show when there's a match |
| `detect_extensions` | `[]` | Which extensions should trigger this module (needs `only_with_files` to be true). |
| `detect_files` | `["docker-compose.yml", "docker-compose.yaml", "Dockerfile"]` | Which filenames should trigger this module (needs `only_with_files` to be true). |
| `detect_folders` | `[]` | Which folders should trigger this module (needs `only_with_files` to be true). |
| `style` | `"blue bold"` | Gaya penataan untuk modul. |
| `disabled` | `false` | Disables the `docker_context` module. |
| context | `test_context` | The current docker context |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[docker_context]
format = "via [🐋 $context](blue bold)"
```
## Dotnet
The `dotnet` module shows the relevant version of the [.NET Core SDK](https://dotnet.microsoft.com/) for the current directory. If the SDK has been pinned in the current directory, the pinned version is shown. Otherwise the module shows the latest installed version of the SDK.
By default this module will only be shown in your prompt when one or more of the following files are present in the current directory:
-`global.json`
-`project.json`
-`Directory.Build.props`
-`Directory.Build.targets`
-`Packages.props`
-`*.csproj`
-`*.fsproj`
-`*.xproj`
You'll also need the .NET Core SDK installed in order to use it correctly.
Internally, this module uses its own mechanism for version detection. Typically it is twice as fast as running `dotnet --version`, but it may show an incorrect version if your .NET project has an unusual directory layout. If accuracy is more important than speed, you can disable the mechanism by setting `heuristic = false` in the module options.
The module will also show the Target Framework Moniker (<https://docs.microsoft.com/en-us/dotnet/standard/frameworks#supported-target-framework-versions>) when there is a csproj file in the current directory.
| `format` | `"via [$symbol($version )(🎯 $tfm )]($style)"` | Format dari modul. |
| `version_format` | `"v${raw}"` | Format dari versi. Variabel yang tersedia adalah `raw`, `major`, `minor`, &`patch` |
| `symbol` | `".NET "` | The symbol used before displaying the version of dotnet. |
| `heuristic` | `true` | Use faster version detection to keep starship snappy. |
| `detect_extensions` | `["csproj", "fsproj", "xproj"]` | Ekstensi mana yang sebaiknya memicu modul ini. |
| `detect_files` | `["global.json", "project.json", "Directory.Build.props", "Directory.Build.targets", "Packages.props"]` | filenames mana yang sebaiknya memicu modul ini. |
| `detect_folders` | `[]` | Which folders should trigger this modules. |
| `style` | `"bold blue"` | Gaya penataan untuk modul. |
| `disabled` | `false` | Disables the `dotnet` module. |
| version | `v3.1.201` | The version of `dotnet` sdk |
| tfm | `netstandard2.0` | The Target Framework Moniker that the current project is targeting |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[dotnet]
symbol = "🥅 "
style = "green"
heuristic = false
```
## Elixir
The `elixir` module shows the currently installed version of [Elixir](https://elixir-lang.org/) and [Erlang/OTP](https://erlang.org/doc/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `mix.exs` file.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[elixir]
symbol = "🔮 "
```
## Elm
The `elm` module shows the currently installed version of [Elm](https://elm-lang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `elm.json` file
- The current directory contains a `elm-package.json` file
- The current directory contains a `.elm-version` file
- The current directory contains a `elm-stuff` folder
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[elm]
format = "via [ $version](cyan bold) "
```
## Environment Variable
The `env_var` module displays the current value of a selected environment variables. The module will be shown only if any of the following conditions are met:
- The `variable` configuration option matches an existing environment variable
- The `variable` configuration option is not defined, but the `default` configuration option is
::: tip Multiple environmental variables can be displayed by using a `.`. (see example) If the `variable` configuration option is not set, the module will display value of variable under the name of text after the `.` character.
Example: following configuration will display value of USER environment variable
| env_value | `Windows NT` (if _variable_ would be `$OS`) | The environment value of option `variable` |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | `black bold dimmed` | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[env_var]
variable = "SHELL"
default = "unknown shell"
```
Displaying multiple environmental variables:
```toml
# ~/.config/starship.toml
[env_var.SHELL]
variable = "SHELL"
default = "unknown shell"
[env_var.USER]
default = "unknown user"
```
## Erlang
The `erlang` module shows the currently installed version of [Erlang/OTP](https://erlang.org/doc/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `rebar.config` file.
- The current directory contains a `erlang.mk` file.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[erlang]
format = "via [e $version](bold red) "
```
## Google Cloud (`gcloud`)
The `gcloud` module shows the current configuration for [`gcloud`](https://cloud.google.com/sdk/gcloud) CLI. This is based on the `~/.config/gcloud/active_config` file and the `~/.config/gcloud/configurations/config_{CONFIG NAME}` file and the `CLOUDSDK_CONFIG` env var.
| hash | `b703eb3` | The current git commit hash |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[git_commit]
commit_hash_length = 4
tag_symbol = "🔖 "
```
## Git State
The `git_state` module will show in directories which are part of a git repository, and where there is an operation in progress, such as: _REBASING_, _BISECTING_, etc. If there is progress information (e.g., REBASING 3/10), that information will be shown too.
| `ahead_count` | Number of commits ahead of the tracking branch |
| `behind_count` | Number of commits behind the tracking branch |
The following variables can be used in `conflicted`, `ahead`, `behind`, `untracked`, `stashed`, `modified`, `staged`, `renamed` and `deleted`:
| Variabel | Deskripsi |
| -------- | ------------------------ |
| `count` | Show the number of files |
### Contoh
```toml
# ~/.config/starship.toml
[git_status]
conflicted = "🏳"
ahead = "🏎💨"
behind = "😰"
diverged = "😵"
up_to_date = "✓"
untracked = "🤷"
stashed = "📦"
modified = "📝"
staged = '[++\($count\)](green)'
renamed = "👅"
deleted = "🗑"
```
Show ahead/behind count of the branch being tracked
```toml
# ~/.config/starship.toml
[git_status]
ahead = "⇡${count}"
diverged = "⇕⇡${ahead_count}⇣${behind_count}"
behind = "⇣${count}"
```
## Golang
The `golang` module shows the currently installed version of [Golang](https://golang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `go.mod` file
- The current directory contains a `go.sum` file
- The current directory contains a `glide.yaml` file
- The current directory contains a `Gopkg.yml` file
- The current directory contains a `Gopkg.lock` file
- The current directory contains a `.go-version` file
- The current directory contains a `Godeps` directory
- The current directory contains a file with the `.go` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[golang]
format = "via [🏎💨 $version](bold cyan) "
```
## Helm
The `helm` module shows the currently installed version of [Helm](https://helm.sh/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `helmfile.yaml` file
- The current directory contains a `Chart.yaml` file
| `ssh_only` | `true` | Only show hostname when connected to an SSH session. |
| `trim_at` | `"."` | String that the hostname is cut off at, after the first match. `"."` will stop after the first dot. `""` will disable any truncation |
| `format` | `"[$hostname]($style) in "` | Format dari modul. |
| `style` | `"bold dimmed green"` | Gaya penataan untuk modul. |
| `disabled` | `false` | Disables the `hostname` module. |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[hostname]
ssh_only = false
format = "on [$hostname](bold red) "
trim_at = ".companyname.com"
disabled = false
```
## Java
The `java` module shows the currently installed version of [Java](https://www.oracle.com/java/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `pom.xml`, `build.gradle.kts`, `build.sbt`, `.java-version`, `.deps.edn`, `project.clj`, or `build.boot` file
- The current directory contains a file with the `.java`, `.class`, `.gradle`, `.jar`, `.clj`, or `.cljc` extension
| `format` | `"via [${symbol}(${version} )]($style)"` | Format dari modul. |
| `version_format` | `"v${raw}"` | Format dari versi. Variabel yang tersedia adalah `raw`, `major`, `minor`, &`patch` |
| `detect_extensions` | `["java", "class", "gradle", "jar", "cljs", "cljc"]` | Ekstensi mana yang sebaiknya memicu modul ini. |
| `detect_files` | `["pom.xml", "build.gradle.kts", "build.sbt", ".java-version", ".deps.edn", "project.clj", "build.boot"]` | filenames mana yang sebaiknya memicu modul ini. |
| `detect_folders` | `[]` | Which folders should trigger this modules. |
| `symbol` | `"☕ "` | A format string representing the symbol of Java |
| `style` | `"red dimmed"` | Gaya penataan untuk modul. |
| `disabled` | `false` | Disables the `java` module. |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[java]
symbol = "🌟 "
```
## Jobs
The `jobs` module shows the current number of jobs running. The module will be shown only if there are background jobs running. The module will show the number of jobs running if there are at least 2 jobs, or more than the `number_threshold` config value, if it exists. The module will show a symbol if there is at least 1 job, or more than the `symbol_threshold` config value, if it exists. You can set both values to 0 in order to *always* show the symbol and number of jobs, even if there are 0 jobs running.
The default functionality is:
- 0 jobs -> Nothing is shown.
- 1 job -> `symbol` is shown.
- 2 jobs or more -> `symbol` + `number` are shown.
::: peringatan
This module is not supported on tcsh and nu.
:::
::: peringatan
The `threshold` option is deprecated, but if you want to use it, the module will show the number of jobs running if there is more than 1 job, or more than the `threshold` config value, if it exists. If `threshold` is set to 0, then the module will also show when there are 0 jobs running.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[jobs]
symbol = "+ "
number_threshold = 4
symbol_threshold = 0
```
## Julia
The `julia` module shows the currently installed version of [Julia](https://julialang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `Project.toml` file
- The current directory contains a `Manifest.toml` file
- The current directory contains a file with the `.jl` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[julia]
symbol = "∴ "
```
## Kotlin
The `kotlin` module shows the currently installed version of [Kotlin](https://kotlinlang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `.kt` or a `.kts` file
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[kotlin]
symbol = "🅺 "
```
```toml
# ~/.config/starship.toml
[kotlin]
# Uses the Kotlin Compiler binary to get the installed version
kotlin_binary = "kotlinc"
```
## Kubernetes
Displays the current [Kubernetes context](https://kubernetes.io/docs/concepts/configuration/organize-cluster-access-kubeconfig/#context) name and, if set, the namespace from the kubeconfig file. The namespace needs to be set in the kubeconfig file, this can be done via `kubectl config set-context starship-cluster --namespace astronaut`. If the `$KUBECONFIG` env var is set the module will use that if not it will use the `~/.kube/config`.
::: saran
This module is disabled by default. To enable it, set `disabled` to `false` in your configuration file.
| context | `starship-cluster` | The current kubernetes context |
| namespace | `starship-namespace` | If set, the current kubernetes namespace |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[kubernetes]
format = 'on [⛵ $context \($namespace\)](dimmed green) '
disabled = false
[kubernetes.context_aliases]
"dev.local.cluster.k8s" = "dev"
".*/openshift-cluster/.*" = "openshift"
"gke_.*_(?P<cluster>[\\w-]+)" = "gke-$cluster"
```
#### Regex Matching
Additional to simple aliasing, `context_aliases` also supports extended matching and renaming using regular expressions.
The regular expression must match on the entire kube context, capture groups can be referenced using `$name` and `$N` in the replacement. This is more explained in the [regex crate](https://docs.rs/regex/1.5.4/regex/struct.Regex.html#method.replace) documentation.
Long and automatically generated cluster names can be identified and shortened using regular expressions:
```toml
[kubernetes.context_aliases]
# OpenShift contexts carry the namespace and user in the kube context: `namespace/name/user`:
".*/openshift-cluster/.*" = "openshift"
# Or better, to rename every OpenShift cluster at once:
".*/(?P<cluster>[\\w-]+)/.*" = "$cluster"
# Contexts from GKE, AWS and other cloud providers usually carry additional information, like the region/zone.
# The following entry matches on the GKE format (`gke_projectname_zone_cluster-name`)
# and renames every matching kube context into a more readable format (`gke-cluster-name`):
"gke_.*_(?P<cluster>[\\w-]+)" = "gke-$cluster"
```
## Line Break
The `line_break` module separates the prompt into two lines.
| `disabled` | `false` | Disables the `line_break` module, making the prompt a single line. |
### Contoh
```toml
# ~/.config/starship.toml
[line_break]
disabled = true
```
## Lua
The `lua` module shows the currently installed version of [Lua](http://www.lua.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `.lua-version` file
- The current directory contains a `lua` directory
- The current directory contains a file with the `.lua` extension
| branch | `master` | The active mercurial branch |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[hg_branch]
format = "on [🌱 $branch](bold purple)"
truncation_length = 4
truncation_symbol = ""
```
## Nim
The `nim` module shows the currently installed version of [Nim](https://nim-lang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `nim.cfg` file
- The current directory contains a file with the `.nim` extension
- The current directory contains a file with the `.nims` extension
- The current directory contains a file with the `.nimble` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[nim]
style = "yellow"
symbol = "🎣 "
```
## Nix-shell
The `nix_shell` module shows the [nix-shell](https://nixos.org/guides/nix-pills/developing-with-nix-shell.html) environment. The module will be shown when inside a nix-shell environment.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[nix_shell]
disabled = true
impure_msg = "[impure shell](bold red)"
pure_msg = "[pure shell](bold green)"
format = 'via [☃️ $state( \($name\))](bold blue) '
```
## Node.js
The `nodejs` module shows the currently installed version of [Node.js](https://nodejs.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `package.json` file
- The current directory contains a `.node-version` file
- The current directory contains a `.nvmrc` file
- The current directory contains a `node_modules` directory
- The current directory contains a file with the `.js`, `.mjs` or `.cjs` extension
- The current directory contains a file with the `.ts` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[nodejs]
format = "via [🤖 $version](bold green) "
```
## OCaml
The `ocaml` module shows the currently installed version of [OCaml](https://ocaml.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a file with `.opam` extension or `_opam` directory
- The current directory contains a `esy.lock` directory
- The current directory contains a `dune` or `dune-project` file
- The current directory contains a `jbuild` or `jbuild-ignore` file
- The current directory contains a `.merlin` file
- The current directory contains a file with `.ml`, `.mli`, `.re` or `.rei` extension
| switch_name | `my-project` | The active OPAM switch |
| switch_indicator | | Mirrors the value of `indicator` for currently active OPAM switch |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[ocaml]
format = "via [🐪 $version]($style) "
```
## OpenStack
The `openstack` module shows the current OpenStack cloud and project. The module only active when the `OS_CLOUD` env var is set, in which case it will read `clouds.yaml` file from any of the [default locations](https://docs.openstack.org/python-openstackclient/latest/configuration/index.html#configuration-files). to fetch the current project in use.
| project | `dev` | The current OpenStack project |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[openstack]
format = "on [$symbol$cloud(\\($project\\))]($style) "
style = "bold yellow"
symbol = "☁️ "
```
## Package Version
The `package` module is shown when the current directory is the repository for a package, and shows its current version. The module currently supports `npm`, `nimble`, `cargo`, `poetry`, `composer`, `gradle`, `julia`, `mix` and `helm` packages.
- [**npm**](https://docs.npmjs.com/cli/commands/npm) – The `npm` package version is extracted from the `package.json` present in the current directory
- [**cargo**](https://doc.rust-lang.org/cargo/) – The `cargo` package version is extracted from the `Cargo.toml` present in the current directory
- [**nimble**](https://github.com/nim-lang/nimble) - The `nimble` package version is extracted from the `*.nimble` file present in the current directory with the `nimble dump` command
- [**poetry**](https://python-poetry.org/) – The `poetry` package version is extracted from the `pyproject.toml` present in the current directory
- [**python**](https://www.python.org) - The `python` package version is extracted from the `setup.cfg` present in the current directory
- [**composer**](https://getcomposer.org/) – The `composer` package version is extracted from the `composer.json` present in the current directory
- [**gradle**](https://gradle.org/) – The `gradle` package version is extracted from the `build.gradle` present
- [**julia**](https://docs.julialang.org/en/v1/stdlib/Pkg/) - The package version is extracted from the `Project.toml` present
- [**mix**](https://hexdocs.pm/mix/) - The `mix` package version is extracted from the `mix.exs` present
- [**helm**](https://helm.sh/docs/helm/helm_package/) - The `helm` chart version is extracted from the `Chart.yaml` present
- [**maven**](https://maven.apache.org/) - The `maven` package version is extracted from the `pom.xml` present
- [**meson**](https://mesonbuild.com/) - The `meson` package version is extracted from the `meson.build` present
- [**vlang**](https://vlang.io) - The `vlang` package version is extracted from the `v.mod` present
> ⚠️ The version being shown is that of the package whose source code is in your current directory, not your package manager.
| version | `v1.0.0` | The version of your package |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[package]
format = "via [🎁 $version](208 bold) "
```
## Perl
The `perl` module shows the currently installed version of [Perl](https://www.perl.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `Makefile.PL` or `Build.PL` file
- The current directory contains a `cpanfile` or `cpanfile.snapshot` file
- The current directory contains a `META.json` file or `META.yml` file
- The current directory contains a `.perl-version` file
- The current directory contains a `.pl`, `.pm` or `.pod`
| `format` | `"via [$symbol($version )]($style)"` | The format string for the module. |
| `version_format` | `"v${raw}"` | Format dari versi. Variabel yang tersedia adalah `raw`, `major`, `minor`, &`patch` |
| `symbol` | `"🐪 "` | The symbol used before displaying the version of Perl |
| `detect_extensions` | `["pl", "pm", "pod"]` | Ekstensi mana yang sebaiknya memicu modul ini. |
| `detect_files` | `["Makefile.PL", "Build.PL", "cpanfile", "cpanfile.snapshot", "META.json", "META.yml", ".perl-version"]` | filenames mana yang sebaiknya memicu modul ini. |
| `detect_folders` | `[]` | Folder mana yang sebaiknya memicul modul ini. |
| `style` | `"bold 149"` | Gaya penataan untuk modul. |
| `disabled` | `false` | Disables the `perl` module. |
The `php` module shows the currently installed version of [PHP](https://www.php.net/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `composer.json` file
- The current directory contains a `.php-version` file
- The current directory contains a `.php` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[php]
format = "via [🔹 $version](147 bold) "
```
## PureScript
The `purescript` module shows the currently installed version of [PureScript](https://www.purescript.org/) version. By default the module will be shown if any of the following conditions are met:
- The current directory contains a `spago.dhall` file
- The current directory contains a file with the `.purs` extension
| version | `0.13.5` | The version of `purescript` |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[purescript]
format = "via [$symbol$version](bold white)"
```
## Python
The `python` module shows the currently installed version of [Python](https://www.python.org/) and the current [Python virtual environment](https://docs.python.org/tutorial/venv.html) if one is activated.
If `pyenv_version_name` is set to `true`, it will display the pyenv version name. Otherwise, it will display the version number from `python --version`.
By default the module will be shown if any of the following conditions are met:
- The current directory contains a `.python-version` file
- The current directory contains a `Pipfile` file
- The current directory contains a `__init__.py` file
- The current directory contains a `pyproject.toml` file
- The current directory contains a `requirements.txt` file
- The current directory contains a `setup.py` file
- The current directory contains a `tox.ini` file
- The current directory contains a file with the `.py` extension.
| `symbol` | `"🐍 "` | A format string representing the symbol of Python |
| `style` | `"yellow bold"` | Gaya penataan untuk modul. |
| `pyenv_version_name` | `false` | Use pyenv to get Python version |
| `pyenv_prefix` | `pyenv` | Prefix before pyenv version display, only used if pyenv is used |
| `python_binary` | `["python", "python3", "python2"]` | Configures the python binaries that Starship should executes when getting the version. |
| `detect_extensions` | `["py"]` | Ekstensi mana yang sebaiknya memicu modul ini |
| `detect_files` | `[".python-version", "Pipfile", "__init__.py", "pyproject.toml", "requirements.txt", "setup.py", "tox.ini"]` | filenames mana yang sebaiknya memicu modul ini |
| `detect_folders` | `[]` | Folder mana yang sebaiknya memicul modul ini |
| `disabled` | `false` | Disables the `python` module. |
::: saran
The `python_binary` variable accepts either a string or a list of strings. Starship will try executing each binary until it gets a result. Note you can only change the binary that Starship executes to get the version of Python not the arguments that are used.
The default values and order for `python_binary` was chosen to first identify the Python version in a virtualenv/conda environments (which currently still add a `python`, no matter if it points to `python3` or `python2`). This has the side effect that if you still have a system Python 2 installed, it may be picked up before any Python 3 (at least on Linux Distros that always symlink `/usr/bin/python` to Python 2). If you do not work with Python 2 anymore but cannot remove the system Python 2, changing this to `"python3"` will hide any Python version 2, see example below.
| style | `"blue bold"` | Menyalin nilai dari opsi `style` |
### Contoh
```toml
# ~/.config/starship.toml
[rlang]
format = "with [📐 $version](blue bold) "
```
## Red
By default the `red` module shows the currently installed version of [Red](https://www.red-lang.org/). The module will be shown if any of the following conditions are met:
- The current directory contains a file with `.red` or `.reds` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[red]
symbol = "🔴 "
```
## Ruby
By default the `ruby` module shows the currently installed version of [Ruby](https://www.ruby-lang.org/). The module will be shown if any of the following conditions are met:
- The current directory contains a `Gemfile` file
- The current directory contains a `.ruby-version` file
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[ruby]
symbol = "🔺 "
```
## Rust
By default the `rust` module shows the currently installed version of [Rust](https://www.rust-lang.org/). The module will be shown if any of the following conditions are met:
- The current directory contains a `Cargo.toml` file
- The current directory contains a file with the `.rs` extension
| version | `v1.43.0-nightly` | The version of `rustc` |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[rust]
format = "via [⚙️ $version](red bold)"
```
## Scala
The `scala` module shows the currently installed version of [Scala](https://www.scala-lang.org/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `build.sbt`, `.scalaenv` or `.sbtenv` file
- The current directory contains a file with the `.scala` or `.sbt` extension
- The current directory contains a directory named `.metals`
| indicator | | Mirrors the value of `indicator` for currently used shell. |
### Contoh
```toml
# ~/.config/starship.toml
[shell]
fish_indicator = ""
powershell_indicator = "_"
unknown_indicator = "mystery shell"
disabled = false
```
## SHLVL
The `shlvl` module shows the current `SHLVL` ("shell level") environment variable, if it is set to a number and meets or exceeds the specified threshold.
| `pipestatus_separator` | `|` | The symbol that separate in pipe program exit codes |
| `pipestatus_format` | `\\[$pipestatus\\] => [$symbol$common_meaning$signal_name$maybe_int]($style)` | The format of the module when the command is a pipeline |
| `disabled` | `true` | Disables the `status` module. |
| status | `127` | The exit code of the last command |
| int | `127` | The exit code of the last command |
| common_meaning | `ERROR` | Meaning of the code if not a signal |
| signal_number | `9` | Signal number corresponding to the exit code, only if signalled |
| signal_name | `KILL` | Name of the signal corresponding to the exit code, only if signalled |
| maybe_int | `7` | Contains the exit code number when no meaning has been found |
| pipestatus | | Rendering of in pipeline programs's exit codes, this is only available in pipestatus_format |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[status]
style = "bg:blue"
symbol = "🔴"
format = '[\[$symbol $common_meaning$signal_name$maybe_int\]]($style) '
map_symbol = true
disabled = false
```
## Swift
By default the `swift` module shows the currently installed version of [Swift](https://swift.org/). The module will be shown if any of the following conditions are met:
- The current directory contains a `Package.swift` file
- The current directory contains a file with the `.swift` extension
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[swift]
format = "via [🏎 $version](red bold)"
```
## Terraform
The `terraform` module shows the currently selected [Terraform workspace](https://www.terraform.io/docs/language/state/workspaces.html) and version.
::: saran
By default the Terraform version is not shown, since this is slow for current versions of Terraform when a lot of plugins are in use. If you still want to enable it, [follow the example shown below](#with-terraform-version).
:::
By default the module will be shown if any of the following conditions are met:
- The current directory contains a `.terraform` folder
- Current directory contains a file with the `.tf` or `.hcl` extensions
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
#### With Terraform Version
```toml
# ~/.config/starship.toml
[terraform]
format = "[🏎💨 $version$workspace]($style) "
```
#### Without Terraform version
```toml
# ~/.config/starship.toml
[terraform]
format = "[🏎💨 $workspace]($style) "
```
## Time
The `time` module shows the current **local** time. The `format` configuration value is used by the [`chrono`](https://crates.io/crates/chrono) crate to control how the time is displayed. Take a look [at the chrono strftime docs](https://docs.rs/chrono/0.4.7/chrono/format/strftime/index.html) to see what options are available.
::: saran
This module is disabled by default. To enable it, set `disabled` to `false` in your configuration file.
| `time_format` | see below | The [chrono format string](https://docs.rs/chrono/0.4.7/chrono/format/strftime/index.html) used to format the time. |
| `style` | `"bold yellow"` | The style for the module time |
| `utc_time_offset` | `"local"` | Sets the UTC offset to use. Range from -24 < x < 24. Allows floats to accommodate 30/45 minute timezone offsets. |
| `disabled` | `true` | Disables the `time` module. |
| `time_range` | `"-"` | Sets the time range during which the module will be shown. Times must be specified in 24-hours format |
If `use_12hr` is `true`, then `time_format` defaults to `"%r"`. Otherwise, it defaults to `"%T"`. Manually setting `time_format` will override the `use_12hr` setting.
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[time]
disabled = false
format = '🕙[\[ $time \]]($style) '
time_format = "%T"
utc_time_offset = "-5"
time_range = "10:00:00-14:00:00"
```
## Username
The `username` module shows active user's username. The module will be shown if any of the following conditions are met:
- The current user is root
- The current user isn't the same as the one that is logged in
- The user is currently connected as an SSH session
- The variable `show_always` is set to true
::: saran
SSH connection is detected by checking environment variables `SSH_CONNECTION`, `SSH_CLIENT`, and `SSH_TTY`. If your SSH host does not set up these variables, one workaround is to set one of them with a dummy value.
| `style` | `"red bold"` | Mirrors the value of option `style_root` when root is logged in and `style_user` otherwise. |
| `user` | `"matchai"` | The currently logged-in user ID. |
### Contoh
```toml
# ~/.config/starship.toml
[username]
style_user = "white bold"
style_root = "black bold"
format = "user: [$user]($style) "
disabled = false
show_always = true
```
## Vagrant
The `vagrant` module shows the currently installed version of [Vagrant](https://www.vagrantup.com/). By default the module will be shown if any of the following conditions are met:
- The current directory contains a `Vagrantfile` file
The `vcsh` module displays the current active [VCSH](https://github.com/RichiH/vcsh) repository. The module will be shown only if a repository is currently in use.
| repo | `dotfiles` if in a VCSH repo named dotfiles | The active repository name |
| symbol | | Menyalin nilai dari opsi `symbol` |
| style\* | `black bold dimmed` | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[vcsh]
format = "[🆅 $repo](bold blue) "
```
## Zig
By default the the `zig` module shows the currently installed version of [Zig](https://ziglang.org/). The module will be shown if any of the following conditions are met:
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
### Contoh
```toml
# ~/.config/starship.toml
[zig]
symbol = "⚡️ "
```
## Custom commands
The `custom` modules show the output of some arbitrary commands.
These modules will be shown if any of the following conditions are met:
- The current directory contains a file whose name is in `files`
- The current directory contains a directory whose name is in `directories`
- The current directory contains a file whose extension is in `extensions`
- The `when` command returns 0
- The current Operating System (std::env::consts::OS) matchs with `os` field if defined.
::: saran
Multiple custom modules can be defined by using a `.`.
:::
::: saran
The order in which custom modules are shown can be individually set by including `${custom.foo}` in the top level `format` (as it includes a dot, you need to use `${...}`). By default, the `custom` module will simply show all custom modules in the order they were defined.
:::
::: saran
[Issue #1252](https://github.com/starship/starship/discussions/1252) contains examples of custom modules. If you have an interesting example not covered there, feel free to share it there!
| `files` | `[]` | The files that will be searched in the working directory for a match. |
| `directories` | `[]` | The directories that will be searched in the working directory for a match. |
| `extensions` | `[]` | The extensions that will be searched in the working directory for a match. |
| `symbol` | `""` | The symbol used before displaying the command output. |
| `style` | `"bold green"` | Gaya penataan untuk modul. |
| `format` | `"[$symbol($output )]($style)"` | Format dari modul. |
| `disabled` | `false` | Disables this `custom` module. |
| `os` | | Operating System name on which the module will be shown (unix, linux, macos, windows, ... ) [See possible values](https://doc.rust-lang.org/std/env/consts/constant.OS.html). |
| output | The output of shell command in `shell` |
| symbol | Menyalin nilai dari opsi `symbol` |
| style\* | Menyalin nilai dari opsi `style` |
\*: Variabel tersebut hanya dapat digunakan sebagai bagian dari penataan string
#### Custom command shell
`shell` accepts a non-empty list of strings, where:
- The first string is the path to the shell to use to execute the command.
- Other following arguments are passed to the shell.
If unset, it will fallback to STARSHIP_SHELL and then to "sh" on Linux, and "cmd /C" on Windows.
The `command` will be passed in on stdin.
If `shell` is not given or only contains one element and Starship detects PowerShell will be used, the following arguments will automatically be added: `-NoProfile -Command -`. This behavior can be avoided by explicitly passing arguments to the shell, e.g.
```toml
shell = ["pwsh", "-Command", "-"]
```
::: warning Make sure your custom shell configuration exits gracefully
If you set a custom command, make sure that the default Shell used by starship will properly execute the command with a graceful exit (via the `shell` option).
For example, PowerShell requires the `-Command` parameter to execute a one liner. Omitting this parameter might throw starship into a recursive loop where the shell might try to load a full profile environment with starship itself again and hence re-execute the custom command, getting into a never ending loop.
Parameters similar to `-NoProfile` in PowerShell are recommended for other shells as well to avoid extra loading time of a custom profile on every starship invocation.
Automatic detection of shells and proper parameters addition are currently implemented, but it's possible that not all shells are covered. [Please open an issue](https://github.com/starship/starship/issues/new/choose) with shell details and starship configuration if you hit such scenario.
