Хоч Starship і універсальна оболонка, іноді необхідно зробити більше ніж просто відредагувати `star.toml`, щоб можна було робити певні речі. Ця сторінка містить деякі з найбільш просунутих методів конфігурації, які використовуються у starship.
Можна замінити попередню підказку на власний рядок. Це корисно у випадках, коли вся інформація з підказки не завжди потрібна. Щоб увімкнути це, запустіть `Enable-TransientPrompt` в сеансі консолі. Щоб зробити цю зміну постійною, додайте цю команду у ваш `$PROFILE`. Transience can be disabled on-the-fly with `Disable-TransientPrompt`.
By default, the left side of input gets replaced with `>`. To customize this, define a new function called `Invoke-Starship-TransientFunction`. For example, to display Starship's `character` module here, you would do
```powershell
function Invoke-Starship-TransientFunction {
&starship module character
}
Invoke-Expression (&starship init powershell)
Enable-TransientPrompt
```
## TransientPrompt and TransientRightPrompt in Cmd
Clink allows you to replace the previous-printed prompt with custom strings. Це корисно у випадках, коли вся інформація з підказки не завжди потрібна. To enable this, run `clink set prompt.transient <value>` where \<value\> can be one of:
-`same_dir`: replace the previous prompt only if the working directory is same
-`off`: do not replace the prompt (i.e. turn off transience)
You need to do this only once. Make the following changes to your `starship.lua` to customize what gets displayed on the left and on the right:
- By default, the left side of input gets replaced with `>`. To customize this, define a new function called `starship_transient_prompt_func`. This function receives the current prompt as a string that you can utilize. For example, to display Starship's `character` module here, you would do
```lua
function starship_transient_prompt_func(prompt)
return io.popen("starship module character"
.." --keymap="..rl.getvariable('keymap')
):read("*a")
end
load(io.popen('starship init cmd'):read("*a"))()
```
- By default, the right side of input is empty. To customize this, define a new function called `starship_transient_rprompt_func`. This function receives the current prompt as a string that you can utilize. For example, to display the time at which the last command was started here, you would do
Можна замінити попередню підказку на власний рядок. Це корисно у випадках, коли вся інформація з підказки не завжди потрібна. To enable this, run `enable_transience` in the shell session. To make it permanent, put this statement in your `~/.config/fish/config.fish`. Transience can be disabled on-the-fly with `disable_transience`.
Note that in case of Fish, the transient prompt is only printed if the commandline is non-empty, and syntactically correct.
- By default, the left side of input gets replaced with a bold-green `❯`. To customize this, define a new function called `starship_transient_prompt_func`. For example, to display Starship's `character` module here, you would do
```fish
function starship_transient_prompt_func
starship module character
end
starship init fish | source
enable_transience
```
- By default, the right side of input is empty. To customize this, define a new function called `starship_transient_rprompt_func`. For example, to display the time at which the last command was started here, you would do
```fish
function starship_transient_rprompt_func
starship module time
end
starship init fish | source
enable_transience
```
## Custom pre-prompt and pre-execution Commands in Cmd
Clink provides extremely flexible APIs to run pre-prompt and pre-exec commands in Cmd shell. It is fairly simple to use with Starship. Make the following changes to your `starship.lua` file as per your requirements:
- To run a custom function right before the prompt is drawn, define a new function called `starship_preprompt_user_func`. This function receives the current prompt as a string that you can utilize. For example, to draw a rocket before the prompt, you would do
```lua
function starship_preprompt_user_func(prompt)
print("🚀")
end
load(io.popen('starship init cmd'):read("*a"))()
```
- To run a custom function right before a command is executed, define a new function called `starship_precmd_user_func`. This function receives the current commandline as a string that you can utilize. For example, to print the command that's about to be executed, you would do
```lua
function starship_precmd_user_func(line)
print("Executing: "..line)
end
load(io.popen('starship init cmd'):read("*a"))()
```
## Custom pre-prompt and pre-execution Commands in Bash
Bash does not have a formal preexec/precmd framework like most other shells. Because of this, it is difficult to provide fully customizable hooks in `bash`. However, Starship does give you limited ability to insert your own functions into the prompt-rendering procedure:
- To run a custom function right before the prompt is drawn, define a new function and then assign its name to `starship_precmd_user_func`. For example, to draw a rocket before the prompt, you would do
```bash
function blastoff(){
echo "🚀"
}
starship_precmd_user_func="blastoff"
```
- To run a custom function right before a command runs, you can use the [`DEBUG` trap mechanism](https://jichu4n.com/posts/debug-trap-and-prompt_command-in-bash/). However, you **must** trap the DEBUG signal _before_ initializing Starship! Starship can preserve the value of the DEBUG trap, but if the trap is overwritten after starship starts up, some functionality will break.
## Custom pre-prompt and pre-execution Commands in PowerShell
PowerShell does not have a formal preexec/precmd framework like most other shells. Because of this, it is difficult to provide fully customizable hooks in `powershell`. However, Starship does give you limited ability to insert your own functions into the prompt-rendering procedure:
Create a function named `Invoke-Starship-PreCommand`
```powershell
function Invoke-Starship-PreCommand {
$host.ui.Write("🚀")
}
```
## Change Window Title
Some shell prompts will automatically change the window title for you (e.g. to reflect your working directory). Fish even does it by default. Starship does not do this, but it's fairly straightforward to add this functionality to `bash`, `zsh`, `cmd` or `powershell`.
First, define a window title change function (identical in bash and zsh):
```bash
function set_win_title(){
echo -ne "\033]0; YOUR_WINDOW_TITLE_HERE \007"
}
```
You can use variables to customize this title (`$USER`, `$HOSTNAME`, and `$PWD` are popular choices).
In `bash`, set this function to be the precmd starship function:
```bash
starship_precmd_user_func="set_win_title"
```
In `zsh`, add this to the `precmd_functions` array:
```bash
precmd_functions+=(set_win_title)
```
If you like the result, add these lines to your shell configuration file (`~/.bashrc` or `~/.zshrc`) to make it permanent.
For example, if you want to display your current directory in your terminal tab title, add the following snippet to your `~/.bashrc` or `~/.zshrc`:
```bash
function set_win_title(){
echo -ne "\033]0; $(basename "$PWD") \007"
}
starship_precmd_user_func="set_win_title"
```
For Cmd, you can change the window title using the `starship_preprompt_user_func` function.
Some shells support a right prompt which renders on the same line as the input. Starship can set the content of the right prompt using the `right_format` option. Any module that can be used in `format` is also supported in `right_format`. The `$all` variable will only contain modules not explicitly used in either `format` or `right_format`.
Note: The right prompt is a single line following the input location. To right align modules above the input line in a multi-line prompt, see the [`fill` module](/config/#fill).
▶ starship on rprompt [!] is 📦 v0.57.0 via 🦀 v1.54.0 took 17s
```
## Continuation Prompt
Some shells support a continuation prompt along with the normal prompt. This prompt is rendered instead of the normal prompt when the user has entered an incomplete statement (such as a single left parenthesis or quote).
Style strings are a list of words, separated by whitespace. The words are not case sensitive (i.e. `bold` and `BoLd` are considered the same string). Each word can be one of the following:
-`bold`
-`italic`
-`underline`
-`dimmed`
-`inverted`
-`blink`
-`hidden`
-`strikethrough`
-`bg:<color>`
-`fg:<color>`
-`<color>`
-`none`
where `<color>` is a color specifier (discussed below). `fg:<color>` and `<color>` currently do the same thing, though this may change in the future. `inverted` swaps the background and foreground colors. The order of words in the string does not matter.
The `none` token overrides all other tokens in a string if it is not part of a `bg:` specifier, so that e.g. `fg:red none fg:blue` will still create a string with no styling. `bg:none` sets the background to the default color so `fg:red bg:none` is equivalent to `red` or `fg:red` and `bg:green fg:red bg:none` is also equivalent to `fg:red` or `red`. It may become an error to use `none` in conjunction with other tokens in the future.
A color specifier can be one of the following:
- One of the standard terminal colors: `black`, `red`, `green`, `blue`, `yellow`, `purple`, `cyan`, `white`. You can optionally prefix these with `bright-` to get the bright version (e.g. `bright-white`).
- A `#` followed by a six-digit hexadecimal number. This specifies an [RGB color hex code](https://www.w3schools.com/colors/colors_hexadecimal.asp).
- A number between 0-255. This specifies an [8-bit ANSI Color Code](https://i.stack.imgur.com/KTSQa.png).
If multiple colors are specified for foreground/background, the last one in the string will take priority.
Not every style string will be displayed correctly by every terminal. In particular, the following known quirks exist:
- Many terminals disable support for `blink` by default
