* feat: add support for tcsh
* add tcsh to install.sh install message
* list tcsh in bug_report.rs and main.rs
* quote starship path
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* fix job count
* add tcsh support to shell module
* fix STARSHIP_START_TIME undefined error
* preserve existing user precmd and postcmd, remove jobs support
* remove unnecessary parentheses
* minor script improvement
* removes parens from install script message
* Update docs/config/README.md
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* fix(Tcsh): remove unecessary quotes
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* feat: add support for tcsh
* add tcsh to install.sh install message
* list tcsh in bug_report.rs and main.rs
* quote starship path
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* fix job count
* add tcsh support to shell module
* fix STARSHIP_START_TIME undefined error
* preserve existing user precmd and postcmd, remove jobs support
* remove unnecessary parentheses
* minor script improvement
* removes parens from install script message
* Update docs/config/README.md
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* docs: Update Nix installation documentation
This changes the documentation to show the provided Home Manager module
instead of manual Home Manager installation instructions. Also fixes a
typo in the NixOS instructions and removes the unfinished and now
unnecessary section on zsh integration via Home manager (since that is
included in the provided module).
* docs: Change example Home Manager configuration
The unicode hexagon symbol does not actually fit into a single column with a
fixed-width font. does. As starship requires a nerd font as a prerequisite,
it's safe to assume that this symbol is available.
Symbol link: https://www.nerdfonts.com/cheat-sheet?set=nf-mdi-nodejs
In the documentation, I've left the '⬢' symbols in '#### Text Group' as
they are, as they will continue displaying correctly in a browser
without a nerd font available. I feel like readability is more important
than consistency with the new nodejs symbol, especially as this
documentation section does not actually refer to nodejs, rather it's
just a symbol.
As `⬢` has been replaced, use `⌘` instead in documentation to avoid
any possible confusion
This makes it possible to configure when the purescript module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the php module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the perl module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the ocaml module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the nodejs module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the nim module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
* feat(erlang): Configure when the module is shown
This makes it possible to configure when the erlang module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
* Update docs/config/README.md
Co-authored-by: Shu Kutsuzawa <cappyzawa@gmail.com>
Co-authored-by: Shu Kutsuzawa <cappyzawa@gmail.com>
This makes it possible to configure when the elm module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the elixir module is shown
based on the contents of a directory. This should make it possible to be
a lot more granular when configuring the module.
* Add the shell module
This module allows to quickly identify which shell is currently used, in case someone frequently switches between them.
* Updated documentation with shell module.
Co-authored-by: mro <mro@fedorabox.localdomain>
This makes it possible to configure when the dotnet module is shown
based on the contents of a directory. This should make it possible to be
a lot more granular when configuring the module.
This makes it possible to configure when the lua module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the golang module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This makes it possible to configure when the terraform module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
* feat(docker_context): Configure when module is shown
This makes it possible to configure when the docker_context module is
shown based on the contents of a directory. This should make it possible
to be a lot more granular when configuring the module.
* Update docs/config/README.md
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
* feat(vagrant): Configure when the module is shown
This makes it possible to configure when the vagrant module is shown based on the contents of a directory.
* fix documentation
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
Co-authored-by: Thomas O'Donnell <andytom@users.noreply.github.com>
* feat(dart): Configure when the module is shown
This makes it possible to configure when the dart module is shown based
on the contents of a directory. This should make it possible to be a lot
more granular when configuring the module.
* docs(dart): add missing detected files
* removed invalid comment
* feat(crystal): Configure when the module is shown
This makes it possible to configure when the crystal module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
* Update docs/config/README.md
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
Co-authored-by: David Knaack <davidkna@users.noreply.github.com>
This makes it possible to configure when the cmake module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
* refactor(directory): Introduce `logical-path` argument which allows a shell to explicitly specify both a logical and physical filesystem path
Fix `directory::module` to consume both path and logical-path (if provided). The "logical" path is preferred when rendering the "display path", while the "physical" path is used to resolve the "read only" flag. Repo- and home-directory contraction behavior is maintained, based on the logical path if it is set, or the physical path if it is not.
The custom "get_current_dir" logic has been removed entirely, and the `directory` module now relies on `context.current_dir` / `context.logical_dir` entirely.
Changes have been made to `init/starship.ps1` to work with this new flag:
- Calculate and pass "physical" and "logical" paths explicitly (as other shells do not pass `--logical-path` that they fall back to rendering the physical path)
- Moved the "powershell provider prefix" cleanup code to the PowerShell script - this code _should_ now support any kind of powershell path prefix.
* fix(powershell): Fix an issue with trailing backslashes on file paths causing command line parsing issues.
This is a bit of a footgun!
The work-around chosen is to append a trailing space when a path string ends with a backslash, and then trim any extra whitespace away in the Context constructor.
Other alternatives considered and rejected:
1. Always trim trailing backslashes as the filesystem generally doesn't need them.
2. Escape trailing backslashes with another backslash. This proved complex as PS only quotes string args when the string includes some whitespace, and other backslashes within the string apparently don't need to be escaped.
* fix(powershell): Use Invoke-Native pattern for safely invoking native executables with strings which may contain characters which need to be escaped carefully.
* fix(context): Remove superfluous argument trims
These were in place to clean up extra whitespace sometimes injected by starship.ps1::prompt, and are no longer required with the new Invoke-Native helper in place.
* refactor(directory): Clean up the semantics of `logical_dir` defaulting it to `current_dir` but overridable by the `--logical-dir` flag.
- Restore `use_logical_path` config flag.
- Always attempt to contract repo paths from the `current_dir`.
* fix(directory) :Use logical_dir for contracting the home directory
This keeps the two calls to contract_path in sync.
* fix(directory): Remove test script
* refactor(directory): Convert current_dir to canonical filesystem path when use_logical_path = false
- This requires some clean-up to remove the extended-path prefix on Windows
- The configured logical_dir is ignored entirely in this mode - we calculate a new logical_dir by cleaning up the physical_dir path for display.
- Test coverage
* fix(directory): Use AsRef style for passing Path arguments
* fix(directory): Strip the windows extended-path prefix from the display string later in the render process
* fix(docs): Update docs/config/README.md for use_logical_path
* refactor(context): Populate `current_dir` from `--path` or `std::env::current_dir`, populate `logical_dir` from `--logical-path` or the `PWD` env var
- `current_dir` is always canonicalized
- On Windows, `current_dir` will have an extended-path prefix
- `logical_dir` is now always set
- `directory::module` now just selects between `current_dir` and `logical_dir` when picking which path to render
- Test coverage
* fix(directory): Fix path comparison operations in directory to ignore differences between path prefixes
- Added PathExt extension trait which adds `normalised_equals`, `normalised_starts_with` and `without_prefix`
* fix(path): Add test coverage for PathExt on *nix
* fix(directory): Test coverage for `contract_repo_path`, `contract_path` with variations of verbatim and non-verbatim paths
* fix(directory): Update path-slash to latest
This fixes the issue with the trailing character of some Windows paths being truncated, e.g. `\\server\share` and `C:`
* fix(powershell): Improve UTF8 output handling, argument encoding
- Use `ProcessStartInfo` to launch native executable, replacing manual UTF8 output encoding handling
- If we detect we're on PWSH6+ use the new `System.Diagnostics.ProcessStartInfo.ArgumentList` parameter, otherwise manually escape the argument string
- Move `Get-Cwd` and `Invoke-Native` into the prompt function scope so that they don't leak into the user's shell scope
* fix(path): Make PathExt methods no-ops on *nix
* fix(path): Cargo fmt
* fix(powershell): Remove typo ';'. Fix variable assignment lint.
This makes it possible to configure when the python module is shown
based on the contents of a directory. This should make it possible to
be a lot more granular when configuring the module.
This includes a breaking change since we are removing the
`scan_for_pyfiles` configuration option in favour of setting the
`detect_extensions` to an empty array.
* Remove status_ prefix from status module variables
* Revert "Remove status_ prefix from status module variables"
This reverts commit f4c6e9ced3040ef2939189afe7ff8bd08d6fae78.
* docs: Remove status_ prefix from status module variables
* feat: add support for elvish shell
* improve doc
* elvish 0.15 is out
* fix example init
* update systax for 0.15 stable
* udpate second init example too
* remove warning from swift module
* add warning to status module docs
* prefix elvish version with v
