1
0
mirror of https://github.com/Llewellynvdm/starship.git synced 2024-12-25 19:21:08 +00:00
starship/install/windows/main.wxs
Zhizhen He 0f8a2d9363
chore: add spell checker to workflows (#4975)
* chore: add spell checker to workflows

* fix: update config schema

* fix: revert for fennel.rs
2023-03-22 13:42:46 -05:00

184 lines
8.8 KiB
XML

<?xml version='1.0' encoding='windows-1252'?>
<!--
Copyright (C) 2017 Christopher R. Field.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!--
The "cargo wix" subcommand provides a variety of predefined variables available
for customization of this template. The values for each variable are set at
installer creation time. The following variables are available:
TargetTriple = The rustc target triple name.
TargetEnv = The rustc target environment. This is typically either
"msvc" or "gnu" depending on the toolchain downloaded and
installed.
TargetVendor = The rustc target vendor. This is typically "pc", but Rust
does support other vendors, like "uwp".
CargoTargetBinDir = The complete path to the binary (exe). The default would
be "target\release\<BINARY_NAME>.exe" where
"<BINARY_NAME>" is replaced with the name of each binary
target defined in the package's manifest (Cargo.toml). If
a different rustc target triple is used than the host,
i.e. cross-compiling, then the default path would be
"target\<CARGO_TARGET>\<CARGO_PROFILE>\<BINARY_NAME>.exe",
where "<CARGO_TARGET>" is replaced with the "CargoTarget"
variable value and "<CARGO_PROFILE>" is replaced with the
value from the `CargoProfile` variable.
CargoTargetDir = The path to the directory for the build artifacts, i.e.
"target".
CargoProfile = Either "debug" or `release` depending on the build
profile. The default is "release".
Version = The version for the installer. The default is the
"Major.Minor.Fix" semantic versioning number of the Rust
package.
-->
<!--
Please do not remove these pre-processor If-Else blocks. These are used with
the `cargo wix` subcommand to automatically determine the installation
destination for 32-bit versus 64-bit installers. Removal of these lines will
cause installation errors.
-->
<?if $(sys.BUILDARCH) = x64 or $(sys.BUILDARCH) = arm64?>
<?define PlatformProgramFilesFolder = "ProgramFiles64Folder"?>
<?else ?>
<?define PlatformProgramFilesFolder = "ProgramFilesFolder"?>
<?endif ?>
<Wix xmlns='http://schemas.microsoft.com/wix/2006/wi'>
<Product Id='*' Name='starship' UpgradeCode='0E489D6B-0FEA-4B6E-B57F-62DD1E892C46' Manufacturer='Starship Contributors' Language='1033' Codepage='1252' Version='$(var.Version)'>
<Package Id='*' Keywords='Installer' Description='The minimal, blazing-fast, and infinitely customizable prompt for any shell! ☄🌌️
' Manufacturer='Starship Contributors' InstallerVersion='450' Languages='1033' Compressed='yes' InstallScope='perMachine' SummaryCodepage='1252' />
<MajorUpgrade Schedule='afterInstallInitialize' DowngradeErrorMessage='A newer version of [ProductName] is already installed. Setup will now exit.' />
<Media Id='1' Cabinet='media1.cab' EmbedCab='yes' DiskPrompt='CD-ROM #1' />
<Property Id='DiskPrompt' Value='starship Installation' />
<Directory Id='TARGETDIR' Name='SourceDir'>
<Directory Id='$(var.PlatformProgramFilesFolder)' Name='PFiles'>
<Directory Id='APPLICATIONFOLDER' Name='starship'>
<!--
Enabling the license sidecar file in the installer is a four step process:
1. Uncomment the `Component` tag and its contents.
2. Change the value for the `Source` attribute in the `File` tag to a path
to the file that should be included as the license sidecar file. The path
can, and probably should be, relative to this file.
3. Change the value for the `Name` attribute in the `File` tag to the
desired name for the file when it is installed alongside the `bin` folder
in the installation directory. This can be omitted if the desired name is
the same as the file name.
4. Uncomment the `ComponentRef` tag with the Id attribute value of "License"
further down in this file.
-->
<Component Id='License' Guid='*'>
<File Id='LicenseFile' Name='LICENSE' DiskId='1' Source='LICENSE' KeyPath='yes' />
</Component>
<Directory Id='Bin' Name='bin'>
<Component Id='Path' Guid='964FD77A-B1CF-4FC4-8F71-8015A879CB9C' KeyPath='yes'>
<Environment Id='PATH' Name='PATH' Value='[Bin]' Permanent='no' Part='last' Action='set' System='yes' />
</Component>
<Component Id='binary0' Guid='*'>
<File Id='exe0' Name='starship.exe' DiskId='1' Source='$(var.CargoTargetBinDir)\starship.exe' KeyPath='yes' />
</Component>
</Directory>
</Directory>
</Directory>
</Directory>
<Feature Id='Binaries' Title='Application' Description='Installs all binaries and the license.' Level='1' ConfigurableDirectory='APPLICATIONFOLDER' AllowAdvertise='no' Display='expand' Absent='disallow'>
<!--
Uncomment the following `ComponentRef` tag to add the license
sidecar file to the installer.
-->
<ComponentRef Id='License' />
<ComponentRef Id='binary0' />
<Feature Id='Environment' Title='PATH Environment Variable' Description='Add the install location of the [ProductName] executable to the PATH system environment variable. This allows the [ProductName] executable to be called from any location.' Level='1' Absent='allow'>
<ComponentRef Id='Path' />
</Feature>
</Feature>
<SetProperty Id='ARPINSTALLLOCATION' Value='[APPLICATIONFOLDER]' After='CostFinalize' />
<!--
The product icon is the graphic that appears in the Add/Remove
Programs control panel for the application.
-->
<Icon Id='ProductICO' SourceFile='media\icon.ico' />
<Property Id='ARPPRODUCTICON' Value='ProductICO' />
<Property Id='ARPHELPLINK' Value='https://starship.rs/guide/' />
<UI>
<UIRef Id='WixUI_FeatureTree' />
<!--
Enabling the EULA dialog in the installer is a three step process:
1. Comment out or remove the two `Publish` tags that follow the
`WixVariable` tag.
2. Uncomment the `<WixVariable Id='WixUILicenseRtf' Value='Path\to\Eula.rft'>` tag further down
3. Replace the `Value` attribute of the `WixVariable` tag with
the path to a RTF file that will be used as the EULA and
displayed in the license agreement dialog.
-->
<Publish Dialog='WelcomeDlg' Control='Next' Event='NewDialog' Value='CustomizeDlg' Order='99'>1</Publish>
<Publish Dialog='CustomizeDlg' Control='Back' Event='NewDialog' Value='WelcomeDlg' Order='99'>1</Publish>
</UI>
<!--
Enabling the EULA dialog in the installer requires uncommenting
the following `WixUILicenseRTF` tag and changing the `Value`
attribute.
-->
<WixVariable Id='WixUILicenseRtf' Value='install\windows\pkg_resources\license.rtf' />
<!--
Uncomment the next `WixVariable` tag to customize the installer's
Graphical User Interface (GUI) and add a custom banner image across
the top of each screen. See the WiX Toolset documentation for details
about customization.
The banner BMP dimensions are 493 x 58 pixels.
-->
<WixVariable Id='WixUIBannerBmp' Value='install\windows\pkg_resources\Banner.bmp' />
<!--
Uncomment the next `WixVariable` tag to customize the installer's
Graphical User Interface (GUI) and add a custom image to the first
dialog, or screen. See the WiX Toolset documentation for details about
customization.
The dialog BMP dimensions are 493 x 312 pixels.
-->
<WixVariable Id='WixUIDialogBmp' Value='install\windows\pkg_resources\Dialog.bmp' />
</Product>
</Wix>