frappe_docker/frappe-installer

#!/usr/bin/env bash

set -euo pipefail
IFS=$'\n\t'

[ -z "$DEBUG" ] & [ "${DEBUG}" == 1 ] && set -o xtrace


__dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
cd "$__dir"

env_url="https://raw.githubusercontent.com/frappe/frappe_docker/master/installation/env-example"
docker_nginx_url="https://github.com/evertramos/docker-compose-letsencrypt-nginx-proxy-companion"
frappe_docker_url="https://github.com/frappe/frappe_docker"
env_file="$__dir/.env"


check_root() {
    if [[ $EUID -ne 0 ]]; then
        echo "This script must be run as root. Login as root or use sudo." 1>&2
        exit 1
    fi
}

check_git() {
    if [ ! -x "$(command -v git)" ]; then
        echo "Git is not installed. Please install git before continuing."
        exit 1
    fi
}

check_docker() {
    if [ ! -x "$(command -v docker)" ]; then
        read -rp "No docker installation found. Press Enter to install docker or ctrl+c to exit."
        curl -fsSL https://get.docker.com | sh
    fi
    if [ ! -x "$(command -v docker)" ]; then
        echo "Docker installation failed. Exiting."
        exit 1
    fi
}

check_env() {
    if [ ! -f "$env_file" ]; then
        echo "No environment file found. This file is required for setting up Frappe/ERPNext Docker."
        echo "Would you like to fetch the default environment file?"
        echo "(NOTE: You will be prompted to set it up later)"
        read -rp "Press Enter to fetch the configuration file, or create a .env file and re-run the script."
        curl -fsSL "$env_url" -o "$env_file"
    fi
}

clone_repository() {
    echo "Cloning Repository: $1"
    git clone "$2"
}

get_config() {
    if [ -n "$2" ]; then
        config_file="$2"
    else
        config_file="$env_file"
    fi
    line=$(grep -E "^$=" "$config_file")
    line_result=$(echo "$line" | awk -F"=" '{print $2}')
}

get_install_version() {
    echo "Choose a version you would like to setup [current: $1]:"
    echo "1. develop (edge)"
    echo "2. version-12"
    echo "3. version-11"
    echo "Please enter your choice [1-3]: "
    select choice in "1" "2" "3"; do
        case $choice in
            1 ) version="edge" ;;
            2 ) version="version-12" ;;
            3 ) version="version-11" ;;
        esac
    done
}

prompt_config() {
    # inspired by discourse_docker
    get_config "VERSION"
    local install_version=$line_result
    get_config "MYSQL_ROOT_PASSWORD"
    local mysql_password=$line_result
    get_config "SITES"
    local sites=$line_result
    get_config "LETSENCRYPT_EMAIL"
    local letsencrypt_email=$line_result

    echo "Would you like to setup networking for docker? [y/n]"
    echo "This is required if you wish to access the instance from other machines."
    select choice in "y" "n"; do
        case $choice in
            y ) setup_networking=1 ;;
            n ) setup_networking=0
                setup_letsencrypt=0 ;;
        esac
    done
    if [ -n "$letsencrypt_email" ] & [ "$setup_networking" -ne "0" ]; then
        echo "Would you like to setup LetsEncrypt? [y/n]"
        select choice in "y" "n"; do
            case $choice in
                y ) setup_letsencrypt=1
                    echo "Please ensure that all the required domains point to this IP address."
                    read -rp "Enter an Email Address to setup LetsEncrypt with: " letsencrypt_email ;;
                n ) setup_letsencrypt=0
                    echo "Skipping LetsEncrypt Setup." ;;
            esac
        done
    fi

    local new_value=""
    local config_state="n"

    echo

    get_install_version "$install_version"
    install_version="$version"

    while [ "$config_state" = "n" ]; do
        if [ -n "$mysql_password" ]; then
            read -srp "Enter MySQL Password [$mysql_password]: " new_value
            if [ -n "$new_value" ]; then
                mysql_password="$new_value"
            fi
        fi

        if [ -n "$sites" ]; then
            read -rp "Enter sitename to setup [$sites]: " new_value
            if [ -n "$new_value" ]; then
                sites="$new_value"
            fi
        fi

        if [ "$setup_letsencrypt" -ne "0" ]; then
            read -rp "Enter email address for LetsEncrypt [$letsencrypt_email]: " new_value
            if [ -n "$new_value" ]; then
                letsencrypt_email=$new_value
            fi
        fi

        echo "Current Configuration:"
        echo "Version: $([ "$install_version" = "edge" ] && echo "develop" || echo "$install_version")"
        echo "MySQL Root Password: $mysql_password"
        echo "Sites: $sites"

        if [ "$setup_letsencrypt" -ne "0" ]; then
            echo "LetsEncrypt Email Address: $letsencrypt_email"
        fi

        echo
        echo "Does this configuration look okay?"
        read -rp "Press Enter to continue, 'n' to try again, or ctrl+c to exit: " config_state
    done

    echo "Saving the current configuration file to $env_file"

    cat << EOF > "$env_file"
VERSION=$install_version
MYSQL_ROOT_PASSWORD=$mysql_password
SITES=$sites
$([ "$setup_letsencrypt" -ne "0" ] && echo "LETSENCRYPT_EMAIL=$letsencrypt_email")
EOF
    setup_configuration=$(<"$env_file")
}

setup_user() {
    echo "The rest of the setup requires a user account."
    echo "You may use an existing account, or set up a new one right away."
    read -rp "Enter username: " username
    if grep -E "^$username" /etc/passwd > /dev/null; then
        echo "User $username already exists."
    else
        read -rsp "Enter password: " password
        password="$(perl -e 'print crypt($ARGV[0], "password")' "$password")"
        if useradd -m -p "$password" "$username" -s "$(command -v bash)"; then
            echo "User $username has been added to the system."
        else
            echo "Failed to add user to the system."
            echo "Please add a user manually and re-run the script."
            exit 1
        fi
    fi

    if ! getent group docker > /dev/null 2>&1 ; then
        echo "Creating group: docker"
        groupadd docker
    fi
    echo "Adding user $username to group: docker"
    usermod -aG docker "$username"
    newgrp docker
}

install() {
    if [ "$setup_letsencrypt" -ne "0" ] & [ "$setup_networking" -ne "0" ]; then
        echo "Setting up NGINX Proxy for LetsEncrypt"
        clone_repository "Docker Compose LetsEncrypt NGINX Proxy Companion" "$docker_nginx_url"
        cd "$(basename "$docker_nginx_url")"
        if [ -f .env.sample ]; then
            cp .env.sample env
        fi
        ./start.sh > /dev/null 2>&1
        cd "$(eval echo ~"$username")"
    fi

    echo "Setting up Frappe/ERPNext"
    clone_repository "Frappe/ERPNext Docker" "$frappe_docker_url"
    cd "$(basename "$frappe_docker_url")"
    echo "$setup_configuration" > .env
    echo "Enter a name for the project."
    read -rp "This project name will be used to setup the docker instance: [erpnext_docker]" project_name
    if [ -z "$project_name" ]; then
        echo "Setting the project name to erpnext_docker"
        project_name="erpnext_docker"
    fi

    docker-compose \
        --project-name "$project_name" \
        --project-directory . up -d \
        -f installation/docker-compose-frappe.yml \
        -f installation/docker-compose-erpnext.yml \
        -f installation/docker-compose-common.yml \
        "$( (( setup_networking == 1 )) && printf %s '-f installation/docker-compose-networks.yml' )"

    get_config "SITES" "$(pwd)/.env"
    local sites=$line_result

    docker exec \
        -e "SITE_NAME=$sites" \
        -e "INSTALL_ERPNEXT=1" \
        -it "$project_name"_erpnext-python_1 docker-entrypoint.sh new

    echo "Installation Complete!"
}

check_root
check_git
check_docker
check_env

prompt_config
setup_user

su - "$username" << EOF
install
EOF