With this change, we want to better highlight the contributions of
developers to Tutor. We want to publicly acknowledge the positive impact
that individuals and companies have on the development of the platform.
to that end, each changelog entry can now be suffixed with the name of
the author (individual or company) who authored the change. These names
will find their way to the release notes for every release. Eventually,
we also want to spread these release notes more widely. For instance, we
could post new releases to the forum to notify the community of
important changes.
If you have contributed to Tutor in the past, feel free to open a PR and
append your name to the changes that you made. We will not be able to
update the release notes for every release out there, but your
contributions will be acknowledged from the changelog.
When mounting a directory in a dev-only container, such as the
"learning" mfe, docker-compose is failing because it is attempting to
run "docker-compose stop" in the local context -- which knows nothing
about the learning container.
To resolve this, we store tmp volumes either in the local or dev
docker-compose.yml, and load either one depending on the context.
- [Improvement] Add the `COMPOSE_PROJECT_STARTED` action and run `dev
stop` on `local start` (and vice versa).
- [Feature] Introduce `local/dev copyfrom` command to copy contents from
a container.
- [Bugfix] Fix a race condition that could prevent a newly provisioned
LMS container from starting due to a `FileExistsError` when creating
data folders.
- [Deprecation] Mark `tutor dev runserver` as deprecated in favor of
`tutor dev start`. Since `start` now supports bind-mounting and
breakpoint debugging, `runserver` is redundant and will be removed in a
future release.
- [Improvement] Allow breakpoint debugging when attached to a service
via `tutor dev start SERVICE`.
- [Security] Apply rate limiting security fix (see
[commit](b5723e416e)).
- [Feature] Introduce the ``-m/--mount`` option in ``local`` and ``dev``
commands to auto-magically bind-mount folders from the host.
- [Feature] Add `tutor dev quickstart` command, which is similar to
`tutor local quickstart`, except that it uses dev containers instead
of local production ones and includes some other small differences for
the convience of Open edX developers. This should remove some friction
from the Open edX development setup process, which previously required
that users provision using local producation containers (`tutor local
quickstart`) but then stop them and switch to dev containers (`tutor
local stop && tutor dev start -d`).
- 💥[Improvement] Make it possible to run `tutor k8s exec <command with
multiple arguments>` (#636). As a consequence, it is no longer
possible to run quoted commands: `tutor k8s exec "<some command>"`.
Instead, you should remove the quotes: `tutor k8s exec <some command>`.
- 💥[Deprecation] Drop support for the `TUTOR_EDX_PLATFORM_SETTINGS`
environment variable. It is now recommended to create a plugin
instead.
- 💥[Improvement] Complete overhaul of the plugin extension mechanism.
Tutor now has a hook-based Python API: actions can be triggered at
different points of the application life cycle and data can be modified
thanks to custom filters. The v0 plugin API is still supported, for
backward compatibility, but plugin developers are encouraged to migrate
their plugins to the new API. See the new plugin tutorial for more
information.
- [Improvement] Improved the output of `tutor plugins list`.
- [Feature] Add `tutor [dev|local|k8s] status` command, which provides
basic information about the platform's status.
Github release CI was running on ubuntu 18.04 withh python 3.6.
Installing tomli==2.0.1, which is required in dev, triggers a failure in
python 3.6 because it is no longer available.
Github release CI was running on ubuntu 18.04 withh python 3.6.
Installing tomli==2.0.1, which is required in dev, triggers a failure in
python 3.6 because it is no longer available.
- [Improvement] Add the `COMPOSE_PROJECT_STARTED` action and run `dev
stop` on `local start` (and vice versa).
- [Feature] Introduce `local/dev copyfrom` command to copy contents from
a container.
- [Bugfix] Fix a race condition that could prevent a newly provisioned
LMS container from starting due to a `FileExistsError` when creating
data folders.
- [Deprecation] Mark `tutor dev runserver` as deprecated in favor of
`tutor dev start`. Since `start` now supports bind-mounting and
breakpoint debugging, `runserver` is redundant and will be removed in a
future release.
- [Improvement] Allow breakpoint debugging when attached to a service
via `tutor dev start SERVICE`.
- [Security] Apply rate limiting security fix (see
[commit](b5723e416e)).
- [Feature] Introduce the ``-m/--mount`` option in ``local`` and ``dev``
commands to auto-magically bind-mount folders from the host.
- [Feature] Add `tutor dev quickstart` command, which is similar to
`tutor local quickstart`, except that it uses dev containers instead
of local production ones and includes some other small differences for
the convience of Open edX developers. This should remove some friction
from the Open edX development setup process, which previously required
that users provision using local producation containers (`tutor local
quickstart`) but then stop them and switch to dev containers (`tutor
local stop && tutor dev start -d`).
- 💥[Improvement] Make it possible to run `tutor k8s exec <command with
multiple arguments>` (#636). As a consequence, it is no longer
possible to run quoted commands: `tutor k8s exec "<some command>"`.
Instead, you should remove the quotes: `tutor k8s exec <some command>`.
- 💥[Deprecation] Drop support for the `TUTOR_EDX_PLATFORM_SETTINGS`
environment variable. It is now recommended to create a plugin
instead.
- 💥[Improvement] Complete overhaul of the plugin extension mechanism.
Tutor now has a hook-based Python API: actions can be triggered at
different points of the application life cycle and data can be modified
thanks to custom filters. The v0 plugin API is still supported, for
backward compatibility, but plugin developers are encouraged to migrate
their plugins to the new API. See the new plugin tutorial for more
information.
- [Improvement] Improved the output of `tutor plugins list`.
- [Feature] Add `tutor [dev|local|k8s] status` command, which provides
basic information about the platform's status.
Running `local start` while a dev platform is still running is a common sourse
of mistakes. Here we introduce a new action to automatically stop local and dev
projects whenever a project with a different name is started.
`copyfrom` copies data from a container to the local filesystem. It's similar
to bindmount, but less clunky, and more intuitive. Also, it plays along great
with `--mount`. Eventually we'll just get rid of the `bindmount` command and
the `--volume` option.
Previously, `tutor dev runserver --volume=x --volume=y`
would log:
'runserver' is deprecated and will be removed in a future release.
Use 'start' instead. Bind-mounts can be specified using '-m/--mount'.
Bind-mounts can be specified using '-m/--mount'.
`tutor dev runserver` will be removed in a future release.
Developers are encouraged to use `tutor dev start` instead,
which is more flexible and provides a consistent interface
with `tutor local start`.
As part of this deprecation, we enable the `tty` and
`stdin_open` options on development docker-compose
services. This will allow developers to use `start`
for breakpoint debugging, which was previously only
availble via `runserver`. Several parallel PRs have
been merged in order to make the same change in the
development services of the official plugins.
Although `start` does not support the `--volume` option,
it supports a more-powerful `--mount` option. So, where
developers previously used:
tutor dev runserver --volume ...
to bind-mount host directories, they should now use:
tutor dev start --mount ...
Resolves https://github.com/overhangio/2u-tutor-adoption/issues/61
When a v1 plugin was installed, several things were happening regarding tests:
1. v1 plugin loading was happening despite the TUTOR_IGNORE_ENTRYPOINT_PLUGINS
environment variable.
2. the CORE_READY event was not triggered because it was happening just once at
import time.
This was causing some tests to incorrectly load the MFE plugin.
The `--mount` option is available both with `tutor local`
and `tutor dev` commands. It allows users to easily bind-mount containers from
the host to containers. Yes, I know, we already provide that possibility with
the `bindmount` command and the `--volume=/path/` option. But these suffer from
the following drawbacks:
- They are difficult to understand.
- The "bindmount" command name does not make much sense.
- It's not convenient to mount an arbitrary folder from the host to multiple
containers, such as the many lms/cms containers (web apps, celery workers and
job runners).
To address this situation, we now recommend to make use of --mount:
1. `--mount=service1[,service2,...]:/host/path:/container/path`: manually mount
`/host/path` to `/container/path` in container "service1" (and "service2").
2. `--mount=/host/path`: use the new v1 plugin API to discover plugins that
will detect this option and select the right containers in which to bind-mount
volumes. This is really nifty...
Close https://github.com/overhangio/2u-tutor-adoption/issues/43
Add `tutor dev quickstart` command, which is equivalent to
`tutor local quickstart`, but uses dev containers instead
of local production ones and includes some other small
differences for the convience of Open edX developers.
This should remove some friction
from the Open edX development setup process, which previously
required that users provision using local producation
containers but then stop them and switch to dev containers:
* tutor local quickstart
* tutor local stop
* tutor dev start -d
Document the command and its improved workflow in
./docs/tutorials/nightly.rst
Fixes overhangio/2u-tutor-adoption#58
The entrypoint in the "openedx" Docker image was used only to define the
DJANGO_SETTINGS_MODULE environment variable, based on SERVICE_VARIANT and
SETTINGS. We ditch SETTINGS in favour of defining explicitely
DJANGO_SETTINGS_MODULE.
The problem with the Docker entrypoint is that it was bypassed whenever we ran
`tutor local exec` or `tutor k8s exec`. By removing it we make it simpler for
end-users to run manage.py commands in kubernetes.
Previously, it was possible to override settings by defining the
TUTOR_EDX_PLATFORM_SETTINGS environment variable. But let's face it:
- It was not very well supported.
- It was poorly explained.
- It was not very useful.
- It causes unnecessary code complexity.
For these reasons, we drop that feature.
This is a very large refactoring which aims at making Tutor both more
extendable and more generic. Historically, the Tutor plugin system was
designed as an ad-hoc solution to allow developers to modify their own
Open edX platforms without having to fork Tutor. The plugin API was
simple, but limited, because of its ad-hoc nature. As a consequence,
there were many things that plugin developers could not do, such as
extending different parts of the CLI or adding custom template filters.
Here, we refactor the whole codebase to make use of a generic plugin
system. This system was inspired by the Wordpress plugin API and the
Open edX "hooks and filters" API. The various components are added to a
small core thanks to a set of actions and filters. Actions are callback
functions that can be triggered at different points of the application
lifecycle. Filters are functions that modify some data. Both actions and
filters are collectively named as "hooks". Hooks can optionally be
created within a certain context, which makes it easier to keep track of
which application created which callback.
This new hooks system allows us to provide a Python API that developers
can use to extend their applications. The API reference is added to the
documentation, along with a new plugin development tutorial.
The plugin v0 API remains supported for backward compatibility of
existing plugins.
Done:
- Do not load commands from plugins which are not enabled.
- Load enabled plugins once on start.
- Implement contexts for actions and filters, which allow us to keep track of
the source of every hook.
- Migrate patches
- Migrate commands
- Migrate plugin detection
- Migrate templates_root
- Migrate config
- Migrate template environment globals and filters
- Migrate hooks to tasks
- Generate hook documentation
- Generate patch reference documentation
- Add the concept of action priority
Close #499.
MySQL 8 drop the support for creating users by executing `GRANT ALL`. This commit splits the user creation and permission granting, therefore the newer MySQL versions are supported too.
MySQL 8 is supported by edx-platform: 1cdb0347c5/playbooks/roles/mysql/tasks/mysql.yml (L93-L98)
