7
0
mirror of https://github.com/ChristianLight/tutor.git synced 2024-06-08 17:02:19 +00:00
tutor/docs/dev.rst
Kyle McCormick f984361d9c
feat: full edx-platform setup with tutor dev launch -m ...
Before this commit, setting up an edx-platform development environment
took multiple steps:

   tutor dev launch
   tutor dev run --mount=/path/to/edx-platform lms bash
   >> pip install -e .
   >> npm clean-install
   >> openedx-assets build --env=dev

This commit moves the steps under ``run`` into an init task, which
is automatically run by ``launch``. Thus, setup is now one command:

   tutor dev launch --mount=edx-platform

These extra init steps are only applicable when bind-mounting
edx-platform (because bind-mounting the repository overrides
some important artifacts that exist on the image, which must be
re-generated). Thus, the new init tasks exists early if it detects
that it is *not* operating on a bind-mounted repository.

Finally, we try to simplify the Open edX development docs so that
it is clearer how bind-mounting fits into the development process.

These bind-mounts:

* ../build/openedx/themes:/openedx/themes
* ../build/openedx/requirements:/openedx/requirements

existed in the dev lms and cms containers, but they did
not exist in the lms-job and cms-job containers.

This means that themes and requirements that were *built into the
image* would exist in the job containers, but live updates to the
themes and requirements would not apply.

To resolve this, we set ``volumes:`` on the lms-job and cms-job
services so that they match the volumes for the normal lms and
cms services.

Part of: https://github.com/openedx/wg-developer-experience/issues/146
Closes: https://github.com/openedx/wg-developer-experience/issues/152

This works around (but does not close) these related issues:
* https://github.com/openedx/wg-developer-experience/issues/150
* https://github.com/openedx/wg-developer-experience/issues/151
2023-03-15 13:31:49 +01:00

280 lines
14 KiB
ReStructuredText

.. _development:
Open edX development
====================
In addition to running Open edX in production, Tutor can be used for local development of Open edX. This means that it is possible to hack on Open edX without setting up a Virtual Machine. Essentially, this replaces the devstack provided by edX.
.. _edx_platform_dev_env:
First-time setup
----------------
Firstly, either :ref:`install Tutor <install>` (for development against the named releases of Open edX) or :ref:`install Tutor Nightly <nightly>` (for development against Open edX's master branches).
Then, run one of the following in order to launch the developer platform setup process::
# To use the edx-platform repository that is built into the image, run:
tutor dev launch
# To bind-mount and run a local clone of edx-platform, replace
# './edx-platform' with the path to the local clone and run:
tutor dev launch --mount=./edx-platform
This will perform several tasks. It will:
* stop any existing locally-running Tutor containers,
* disable HTTPS,
* set ``LMS_HOST`` to `local.overhang.io <http://local.overhang.io>`_ (a convenience domain that simply `points at 127.0.0.1 <https://dnschecker.org/#A/local.overhang.io>`_),
* prompt for a platform details (with suitable defaults),
* build an ``openedx-dev`` image, which is based ``openedx`` production image but is `specialized for developer usage`_,
* start LMS, CMS, supporting services, and any plugged-in services,
* ensure databases are created and migrated, and
* run service initialization scripts, such as service user creation and Waffle configuration.
Additionally, when a local clone of edx-platform is bind-mounted, it will:
* re-run setup.py,
* clean-reinstall Node modules, and
* regenerate static assets.
Once setup is complete, the platform will be running in the background:
* LMS will be accessible at `http://local.overhang.io:8000 <http://local.overhang.io:8000>`_.
* CMS will be accessible at `http://studio.local.overhang.io:8001 <http://studio.local.overhang.io:8001>`_.
* Plugged-in services should be accessible at their documented URLs.
Now, use the ``tutor dev ...`` command-line interface to manage the development environment. Some common commands are described below.
.. note::
Wherever the ``[--mount=./edx-platform]`` option is present, either:
* omit it when running of the edx-platform repository built into the image, or
* substitute it with ``--mount=<path/to/edx-platform>``.
Read more about bind-mounts :ref:`below <bind_mounts>`.
Stopping the platform
---------------------
To bring down the platform's containers, simply run::
tutor dev stop
Starting the platform back up
-----------------------------
Once first-time setup has been performed with ``launch``, the platform can be started going forward with the lighter-weight ``start -d`` command, which brings up containers *detached* (that is: in the background), but does not perform any initialization tasks::
tutor dev start -d [--mount=./edx-platform]
Or, to start with platform with containers *attached* (that is: in the foreground, the current terminal), omit the ``-d`` flag::
tutor dev start [--mount=./edx-platform]
When running containers attached, stop the platform with ``Ctrl+c``, or switch to detached mode using ``Ctrl+z``.
Finally, the platform can also be started back up with ``launch``. It will take longer than ``start``, but it will ensure that config is applied, databases are provisioned & migrated, plugins are fully initialized, and (if applicable) the bind-mounted edx-platform is set up. Notably, ``launch`` is idempotent, so it is always safe to run it again without risk to data. Including the ``--pullimages`` flag will also ensure that container images are up-to-date::
tutor dev launch [--mount=./edx-platform] --pullimages
Debugging with breakpoints
--------------------------
To debug a local edx-platform repository, add a `python breakpoint <https://docs.python.org/3/library/functions.html#breakpoint>`__ with ``breakpoint()`` anywhere in the code. Then, attach to the applicable service's container by running ``start`` (without ``-d``) followed by the service's name::
# Debugging LMS:
tutor dev start [--mount=./edx-platform] lms
# Or, debugging CMS:
tutor dev start [--mount=./edx-platform] cms
Running arbitrary commands
--------------------------
To run any command inside one of the containers, run ``tutor dev run [OPTIONS] SERVICE [COMMAND] [ARGS]...``. For instance, to open a bash shell in the LMS or CMS containers::
tutor dev run [--mount=./edx-platform] lms bash
tutor dev run [--mount=./edx-platform] cms bash
To open a python shell in the LMS or CMS, run::
tutor dev run [--mount=./edx-platform] lms ./manage.py lms shell
tutor dev run [--mount=./edx-platform] cms ./manage.py cms shell
You can then import edx-platform and django modules and execute python code.
To rebuild assets, you can use the ``openedx-assets`` command that ships with Tutor::
tutor dev run [--mount=./edx-platform] lms openedx-assets build --env=dev
.. _specialized for developer usage:
Rebuilding the openedx-dev image
--------------------------------
The ``openedx-dev`` Docker image is based on the same ``openedx`` image used by ``tutor local ...`` to run LMS and CMS. However, it has a few differences to make it more convenient for developers:
- The user that runs inside the container has the same UID as the user on the host, to avoid permission problems inside mounted volumes (and in particular in the edx-platform repository).
- Additional Python and system requirements are installed for convenient debugging: `ipython <https://ipython.org/>`__, `ipdb <https://pypi.org/project/ipdb/>`__, vim, telnet.
- The edx-platform `development requirements <https://github.com/openedx/edx-platform/blob/open-release/olive.master/requirements/edx/development.in>`__ are installed.
If you are using a custom ``openedx`` image, then you will need to rebuild ``openedx-dev`` every time you modify ``openedx``. To so, run::
tutor dev dc build lms
.. _bind_mounts:
Sharing directories with containers
-----------------------------------
It may sometimes be convenient to mount container directories on the host, for instance: for editing and debugging. Tutor provides different solutions to this problem.
.. _mount_option:
Bind-mount volumes with ``--mount``
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The ``launch``, ``run``, ``init`` and ``start`` subcommands of ``tutor dev`` and ``tutor local`` support the ``-m/--mount`` option (see :option:`tutor dev start -m`) which can take two different forms. The first is explicit::
tutor dev start --mount=lms:/path/to/edx-platform:/openedx/edx-platform lms
And the second is implicit::
tutor dev start --mount=/path/to/edx-platform lms
With the explicit form, the ``--mount`` option means "bind-mount the host folder /path/to/edx-platform to /openedx/edx-platform in the lms container".
If you use the explicit format, you will quickly realise that you usually want to bind-mount folders in multiple containers at a time. For instance, you will want to bind-mount the edx-platform repository in the "cms" container. To do that, write instead::
tutor dev start --mount=lms,cms:/path/to/edx-platform:/openedx/edx-platform lms
This command line can become cumbersome and inconvenient to work with. But Tutor can be smart about bind-mounting folders to the right containers in the right place when you use the implicit form of the ``--mount`` option. For instance, the following commands are equivalent::
# Explicit form
tutor dev start --mount=lms,lms-worker,lms-job,cms,cms-worker,cms-job:/path/to/edx-platform:/openedx/edx-platform lms
# Implicit form
tutor dev start --mount=/path/to/edx-platform lms
So, when should you *not* be using the implicit form? That would be when Tutor does not know where to bind-mount your host folders. For instance, if you wanted to bind-mount your edx-platform virtual environment located in ``~/venvs/edx-platform``, you should not write ``--mount=~/venvs/edx-platform``, because that folder would be mounted in a way that would override the edx-platform repository in the container. Instead, you should write::
tutor dev start --mount=lms:~/venvs/edx-platform:/openedx/venv lms
.. note:: Remember to setup your edx-platform repository for development! See :ref:`edx_platform_dev_env`.
Copy files from containers to the local filesystem
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, you may want to modify some of the files inside a container for which you don't have a copy on the host. A typical example is when you want to troubleshoot a Python dependency that is installed inside the application virtual environment. In such cases, you want to first copy the contents of the virtual environment from the container to the local filesystem. To that end, Tutor provides the ``tutor dev copyfrom`` command. First, copy the contents of the container folder to the local filesystem::
tutor dev copyfrom lms /openedx/venv ~
Then, bind-mount that folder back in the container with the ``--mount`` option (described :ref:`above <mount_option>`)::
tutor dev start --mount lms:~/venv:/openedx/venv lms
You can then edit the files in ``~/venv`` on your local filesystem and see the changes live in your container.
Manual bind-mount to any directory
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. warning:: Manually bind-mounting volumes with the ``--volume`` option makes it difficult to simultaneously bind-mount to multiple containers. Also, the ``--volume`` options are not compatible with ``start`` commands. For an alternative, see the :ref:`mount option <mount_option>`.
The above solution may not work for you if you already have an existing directory, outside of the "volumes/" directory, which you would like mounted in one of your containers. For instance, you may want to mount your copy of the `edx-platform <https://github.com/openedx/edx-platform/>`__ repository. In such cases, you can simply use the ``-v/--volume`` `Docker option <https://docs.docker.com/storage/volumes/#choose-the--v-or---mount-flag>`__::
tutor dev run --volume=/path/to/edx-platform:/openedx/edx-platform lms bash
Override docker-compose volumes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The above solutions require that you explicitly pass the ``-m/--mount`` options to every ``run``, ``start`` or ``init`` command, which may be inconvenient. To address these issues, you can create a ``docker-compose.override.yml`` file that will specify custom volumes to be used with all ``dev`` commands::
vim "$(tutor config printroot)/env/dev/docker-compose.override.yml"
You are then free to bind-mount any directory to any container. For instance, to mount your own edx-platform fork::
version: "3.7"
services:
lms:
volumes:
- /path/to/edx-platform:/openedx/edx-platform
cms:
volumes:
- /path/to/edx-platform:/openedx/edx-platform
lms-worker:
volumes:
- /path/to/edx-platform:/openedx/edx-platform
cms-worker:
volumes:
- /path/to/edx-platform:/openedx/edx-platform
This override file will be loaded when running any ``tutor dev ..`` command. The edx-platform repo mounted at the specified path will be automatically mounted inside all LMS and CMS containers. With this file, you should no longer specify the ``-m/--mount`` option from the command line.
.. note::
The ``tutor local`` commands load the ``docker-compose.override.yml`` file from the ``$(tutor config printroot)/env/local/docker-compose.override.yml`` directory. One-time jobs from initialisation commands load the ``local/docker-compose.jobs.override.yml`` and ``dev/docker-compose.jobs.override.yml``.
Common tasks
------------
XBlock and edx-platform plugin development
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In some cases, you will have to develop features for packages that are pip-installed next to the edx-platform. This is quite easy with Tutor. Just add your packages to the ``$(tutor config printroot)/env/build/openedx/requirements/private.txt`` file. To avoid re-building the openedx Docker image at every change, you should add your package in editable mode. For instance::
echo "-e ./mypackage" >> "$(tutor config printroot)/env/build/openedx/requirements/private.txt"
The ``requirements`` folder should have the following content::
env/build/openedx/requirements/
private.txt
mypackage/
setup.py
...
You will have to re-build the openedx Docker image once::
tutor images build openedx
You should then run the development server as usual, with ``start``. Every change made to the ``mypackage`` folder will be picked up and the development server will be automatically reloaded.
Running edx-platform unit tests
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It's possible to run the full set of unit tests that ship with `edx-platform <https://github.com/openedx/edx-platform/>`__. To do so, run a shell in the LMS development container::
tutor dev run lms bash
Then, run unit tests with ``pytest`` commands::
# Run tests on common apps
unset DJANGO_SETTINGS_MODULE
unset SERVICE_VARIANT
export EDXAPP_TEST_MONGO_HOST=mongodb
pytest common
pytest openedx
pytest xmodule
# Run tests on LMS
export DJANGO_SETTINGS_MODULE=lms.envs.tutor.test
pytest lms
# Run tests on CMS
export DJANGO_SETTINGS_MODULE=cms.envs.tutor.test
pytest cms
.. note::
Getting all edx-platform unit tests to pass on Tutor is currently a work-in-progress. Some unit tests are still failing. If you manage to fix some of these, please report your findings in the `Open edX forum <https://discuss.openedx.org/tag/tutor>`__.