diff --git a/README.md b/README.md index cabc443..3048734 100644 --- a/README.md +++ b/README.md @@ -2,112 +2,84 @@ This is a guide to using [YubiKey](https://www.yubico.com/products/) as a [smart Keys stored on YubiKey are [non-exportable](https://web.archive.org/web/20201125172759/https://support.yubico.com/hc/en-us/articles/360016614880-Can-I-Duplicate-or-Back-Up-a-YubiKey-), unlike filesystem-based credentials, while remaining convenient for daily use. YubiKey can be configured to require a physical touch for cryptographic operations, reducing the risk of credential compromise. -**Important** If you followed this guide before Jan 2021, *PIN* and *Admin PIN* may be set to default values of `123456` and `12345678`. See [Change PIN](#change-pin) to change PINs. +To suggest an improvement, send a pull request or open an [issue](https://github.com/drduh/YubiKey-Guide/issues). -To suggest an improvement, please send a pull request or open an [issue](https://github.com/drduh/YubiKey-Guide/issues). - -**Tip** [drduh/Purse](https://github.com/drduh/Purse) is a password manager which uses GnuPG and YubiKey to securely store and use credentials. - -- [Purchase](#purchase) +- [Purchase YubiKey](#purchase-yubikey) - [Prepare environment](#prepare-environment) -- [Required software](#required-software) - * [Debian and Ubuntu](#debian-and-ubuntu) - * [Fedora](#fedora) - * [Arch](#arch) - * [RHEL7](#rhel7) - * [NixOS](#nixos) - * [OpenBSD](#openbsd) - * [macOS](#macos) - * [Windows](#windows) -- [Entropy](#entropy) - * [OneRNG](#onerng) -- [Generate keys](#generate-keys) - * [Temporary working directory](#temporary-working-directory) - * [Hardened configuration](#hardened-configuration) -- [Certify key](#certify-key) -- [Subkeys](#subkeys) - * [Signature key](#signature-key) - * [Encryption key](#encryption-key) - * [Authentication key](#authentication-key) -- [Verify](#verify) -- [Export secret keys](#export-secret-keys) -- [Revocation certificate](#revocation-certificate) -- [Backup](#backup) + * [Improving entropy](#improving-entropy) +- [Install software](#install-software) +- [Prepare GnuPG](#prepare-gnupg) + * [Configuration](#configuration) + * [Identity](#identity) + * [Expiration](#expiration) + * [Passphrase](#passphrase) +- [Create Certify key](#create-certify-key) +- [Create Subkeys](#create-subkeys) +- [Verify keys](#verify-keys) +- [Backup keys](#backup-keys) - [Export public key](#export-public-key) - [Configure YubiKey](#configure-yubikey) * [Enable KDF](#enable-kdf) * [Change PIN](#change-pin) - * [Set information](#set-information) -- [Transfer keys](#transfer-keys) - * [Signature key](#signature-key-1) - * [Encryption key](#encryption-key-1) - * [Authentication key](#authentication-key-1) + * [Set attributes](#set-attributes) +- [Transfer Subkeys](#transfer-subkeys) + * [Signature key](#signature-key) + * [Encryption key](#encryption-key) + * [Authentication key](#authentication-key) - [Verify transfer](#verify-transfer) -- [Multiple YubiKeys](#multiple-yubikeys) - * [Switching between YubiKeys](#switching-between-yubikeys) -- [Finish](#finish) -- [Using keys](#using-keys) -- [Rotating keys](#rotating-keys) - * [Setup environment](#setup-environment) - * [Renewing Subkeys](#renewing-subkeys) - * [Rotating keys](#rotating-keys-1) -- [Adding notations](#adding-notations) -- [SSH](#ssh) - * [Create configuration](#create-configuration) - * [Replace agents](#replace-agents) - * [Copy public key](#copy-public-key) - * [(Optional) Save public key for identity file configuration](#optional-save-public-key-for-identity-file-configuration) - * [Connect with public key authentication](#connect-with-public-key-authentication) - * [Import SSH keys](#import-ssh-keys) - * [Remote Machines (SSH Agent Forwarding)](#remote-machines-ssh-agent-forwarding) - + [Use ssh-agent ](#use-ssh-agent) - + [Use S.gpg-agent.ssh](#use-sgpg-agentssh) - + [Chained SSH agent forwarding](#chained-ssh-agent-forwarding) +- [Finish setup](#finish-setup) +- [Using YubiKey](#using-yubikey) + * [Encryption](#encryption) + * [Signature](#signature) + * [Configure touch](#configure-touch) + * [SSH](#ssh) + + [Replace agents](#replace-agents) + + [Copy public key](#copy-public-key) + + [Import SSH keys](#import-ssh-keys) + + [SSH agent forwarding](#ssh-agent-forwarding) + - [Use ssh-agent](#use-ssh-agent) + - [Use S.gpg-agent.ssh](#use-sgpg-agentssh) + - [Chained forwarding](#chained-forwarding) * [GitHub](#github) - * [OpenBSD](#openbsd-1) - * [Windows](#windows-1) - + [WSL](#wsl) - * [macOS](#macos-1) -- [Remote Machines (GPG Agent Forwarding)](#remote-machines-gpg-agent-forwarding) - * [Steps for older distributions](#steps-for-older-distributions) - * [Chained GnuPG agent forwarding](#chained-gnupg-agent-forwarding) -- [Using Multiple Keys](#using-multiple-keys) -- [Adding an identity](#adding-an-identity) - * [Updating YubiKey](#updating-yubikey) -- [Require touch](#require-touch) -- [Email](#email) - * [Mailvelope](#mailvelope) - * [Mutt](#mutt) -- [Reset](#reset) - * [Recovery after reset](#recovery-after-reset) + * [GnuPG agent forwarding](#gnupg-agent-forwarding) + + [Legacy distributions](#legacy-distributions) + + [Chained GnuPG agent forwarding](#chained-gnupg-agent-forwarding) + * [Using multiple YubiKeys](#using-multiple-yubikeys) + * [Email](#email) + + [Mailvelope](#mailvelope) + + [Mutt](#mutt) +- [Updating keys](#updating-keys) + * [Renew Subkeys](#renew-subkeys) + * [Rotate Subkeys](#rotate-subkeys) +- [Reset YubiKey](#reset-yubikey) - [Notes](#notes) - [Troubleshooting](#troubleshooting) -- [Alternatives](#alternatives) - * [Create keys with batch](#create-keys-with-batch) +- [Alternative solutions](#alternative-solutions) - [Additional resources](#additional-resources) -# Purchase +# Purchase YubiKey -All YubiKeys except the blue "security key" model and the "Bio Series - FIDO Edition" are compatible with this guide. NEO models are limited to 2048-bit RSA keys. Compare YubiKeys [here](https://www.yubico.com/products/yubikey-hardware/compare-products-series/). A list of the YubiKeys compatible with OpenPGP is available [here](https://support.yubico.com/hc/en-us/articles/360013790259-Using-Your-YubiKey-with-OpenPGP). In May 2021, Yubico also released a press release and blog post about supporting resident ssh keys on their YubiKeys including blue "security key 5 NFC" with OpenSSH 8.2 or later, see [here](https://www.yubico.com/blog/github-now-supports-ssh-security-keys/) for more information. +[Current YubiKeys](https://www.yubico.com/store/compare/) except the FIDO-only Security Key Series and Bio Series YubiKeys are compatible with this guide. -To [verify a YubiKey](https://support.yubico.com/hc/en-us/articles/360013723419-How-to-Confirm-Your-Yubico-Device-is-Genuine), visit [yubico.com/genuine](https://www.yubico.com/genuine/). Insert a Yubico device, and select *Verify Device* to begin the process. Touch the YubiKey when prompted, and if asked, allow the site to see the make and model of the device. This device attestation may help mitigate [supply chain attacks](https://media.defcon.org/DEF%20CON%2025/DEF%20CON%2025%20presentations/DEF%20CON%2025%20-%20r00killah-and-securelyfitz-Secure-Tokin-and-Doobiekeys.pdf). +[Verify YubiKey](https://support.yubico.com/hc/en-us/articles/360013723419-How-to-Confirm-Your-Yubico-Device-is-Genuine) by visiting [yubico.com/genuine](https://www.yubico.com/genuine/). Select *Verify Device* to begin the process. Touch the YubiKey when prompted and allow the site to see the make and model of the device when prompted. This device attestation may help mitigate [supply chain attacks](https://media.defcon.org/DEF%20CON%2025/DEF%20CON%2025%20presentations/DEF%20CON%2025%20-%20r00killah-and-securelyfitz-Secure-Tokin-and-Doobiekeys.pdf). Several portable storage devices (such as microSD cards) for storing encrypted backups are also recommended. # Prepare environment -To generate cryptographic keys, creating a dedicated secure environment is recommended. +A dedicated, secure operating environment is recommended to generate cryptographic keys. -The following is a general ranking of environments most to least likely to be compromised: +The following is a general ranking of environments least to most hospitable to generating materials: -1. Daily-use system with unrestricted network access -1. Virtual machine on daily-use host OS (using [virt-manager](https://virt-manager.org/), VirtualBox or VMware) -1. Dedicated and hardened [Debian](https://www.debian.org/) or [OpenBSD](https://www.openbsd.org/) system -1. Live image, such as [Debian Live](https://www.debian.org/CD/live/) or [Tails](https://tails.boum.org/index.en.html) +1. Public, shared or other computer owned by someone else +1. Daily-use personal operating system with unrestricted network access +1. Virtualized operating system with limited capabilities (using [virt-manager](https://virt-manager.org/), VirtualBox or VMware, for example) +1. Dedicated and hardened [Debian](https://www.debian.org/) or [OpenBSD](https://www.openbsd.org/) installation +1. Ephemeral [Debian Live](https://www.debian.org/CD/live/) or [Tails](https://tails.boum.org/index.en.html) booted without primary storage attached 1. Hardened hardware and firmware ([Coreboot](https://www.coreboot.org/), [Intel ME removed](https://github.com/corna/me_cleaner)) -1. Dedicated air-gapped system without network capabilities (ARM-based Raspberry Pi or other architecturally diverse equivalent) +1. Air-gapped system without network capabilities, preferably ARM-based Raspberry Pi or other architecturally diverse equivalent -A Debian Linux live image is recommended to balance usability and security. +Debian Live is used in this guide to balance usability and security, with some additional instructions for OpenBSD. Download the latest image and signature files: @@ -147,24 +119,20 @@ grep $(sha512sum debian-live-*-amd64-xfce.iso) SHA512SUMS See [Verifying authenticity of Debian CDs](https://www.debian.org/CD/verify) for more information. -Mount a portable storage device and copy the image: +Connect a portable storage device and identify the disk label - this guide uses `/dev/sdc` throughout, but this value may differ on your system: **Linux** ```console $ sudo dmesg | tail usb-storage 3-2:1.0: USB Mass Storage device detected -scsi host2: usb-storage 3-2:1.0 -scsi 2:0:0:0: Direct-Access TS-RDF5 SD Transcend TS3A PQ: 0 ANSI: 6 -sd 2:0:0:0: Attached scsi generic sg1 type 0 -sd 2:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) -sd 2:0:0:0: [sdb] Write Protect is off -sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 -sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA -sdb: sdb1 sdb2 -sd 2:0:0:0: [sdb] Attached SCSI removable disk +sd 2:0:0:0: [sdc] Attached SCSI removable disk +``` -$ sudo dd if=debian-live-*-amd64-xfce.iso of=/dev/sdb bs=4M status=progress ; sync +Copy the Debian image to the device: + +```console +$ sudo dd if=debian-live-*-amd64-xfce.iso of=/dev/sdc bs=4M status=progress ; sync 465+1 records in 465+1 records out 1951432704 bytes (2.0 GB, 1.8 GiB) copied, 42.8543 s, 45.5 MB/s @@ -185,159 +153,13 @@ $ doas dd if=debian-live-*-amd64-xfce.iso of=/dev/rsd2c bs=4m Power off, then disconnect internal hard drives and all unnecessary devices, such as the wireless card. -# Required software - -Boot the live image and configure networking. - -**Note** If the screen locks, unlock with `user` / `live` - -Open terminal and install required software packages. - -## Debian and Ubuntu - -```console -sudo apt update - -sudo apt -y upgrade - -sudo apt -y install \ - wget gnupg2 gnupg-agent dirmngr \ - cryptsetup scdaemon pcscd secure-delete \ - yubikey-personalization -``` - -**Note** `hopenpgp-tools` is no longer part of the latest Debian stable package repositories. To install it, go to [https://packages.debian.org/sid/hopenpgp-tools](https://packages.debian.org/sid/hopenpgp-tools) to select the correct architecture (likely `amd64`) and then an ftp server. - -Edit `/etc/apt/sources.list` and add the ftp server: - -``` -deb http://ftp.debian.org/debian sid main -``` - -Then add this to `/etc/apt/preferences` (or a fragment, e.g. `/etc/apt/preferences.d/00-sid`) so that APT still prioritizes packages from the stable repository over sid. - -``` -Package: * -Pin: release n=sid -Pin-Priority: 10 -``` - -**Note** Live Ubuntu images [may require modification](https://github.com/drduh/YubiKey-Guide/issues/116) to `/etc/apt/sources.list` and may need additional packages: - -```console -sudo apt -y install libssl-dev swig libpcsclite-dev -``` - -**Optional** Install the `ykman` utility, which will allow you to enable touch policies (requires admin PIN): - -```console -sudo apt -y install python3-pip python3-pyscard - -pip3 install PyOpenSSL - -pip3 install yubikey-manager - -sudo service pcscd start - -~/.local/bin/ykman openpgp info -``` - -**Note** Debian 12 does not recommend installing non-Debian packaged Python applications globally. But fortunately, it is not necessary as `yubikey-manager` is available in the stable main repository: - -```console -sudo apt install yubikey-manager -``` - -## Fedora - -```console -sudo dnf install wget - -wget https://github.com/rpmsphere/noarch/raw/master/r/rpmsphere-release-38-1.noarch.rpm - -sudo rpm -Uvh rpmsphere-release*rpm - -sudo dnf install \ - gnupg2 dirmngr cryptsetup gnupg2-smime \ - pcsc-tools opensc pcsc-lite secure-delete \ - pgp-tools yubikey-personalization-gui -``` - -## Arch - -```console -sudo pacman -Syu gnupg pcsclite ccid hopenpgp-tools yubikey-personalization -``` - -## RHEL7 - -```console -sudo yum install -y gnupg2 pinentry-curses pcsc-lite pcsc-lite-libs gnupg2-smime -``` - -## NixOS - -Build an air-gapped NixOS LiveCD image: - -```console -ref=$(git ls-remote https://github.com/drduh/Yubikey-Guide refs/heads/master | awk '{print $1}') - -nix build --experimental-features "nix-command flakes" github:drduh/YubiKey-Guide/$ref#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage -``` - -If you have this repository checked out: - -Recommended, but optional: update `nixpkgs` and `drduh/config`: - -```console -nix flake update --commit-lock-file -``` - -Build the ISO: - -```console -nix build --experimental-features "nix-command flakes" .#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage -``` - -Copy it to a USB drive: - -```console -sudo cp -v result/iso/yubikeyLive.iso /dev/sdb ; sync -``` - -With this image, you won't need to create a [temporary working directory](#temporary-working-directory) or [harden the configuration](#hardened-configuration), as it was done when creating the image. - -## OpenBSD - -```console -doas pkg_add gnupg pcsc-tools -``` - -## macOS - -Download and install [Homebrew](https://brew.sh/) and the following packages: - -```console -brew install gnupg yubikey-personalization hopenpgp-tools ykman pinentry-mac wget -``` - -**Note** An additional Python package dependency may need to be installed to use [`ykman`](https://support.yubico.com/support/solutions/articles/15000012643-yubikey-manager-cli-ykman-user-guide) - `pip install yubikey-manager` - -## Windows - -Download and install [Gpg4Win](https://www.gpg4win.org/) and [PuTTY](https://putty.org). - -You may also need more recent versions of [yubikey-personalization](https://developers.yubico.com/yubikey-personalization/Releases/) and [yubico-c](https://developers.yubico.com/yubico-c/Releases/). - -# Entropy +## Improving entropy Generating cryptographic keys requires high-quality [randomness](https://www.random.org/randomness/), measured as entropy. Most operating systems use software-based pseudorandom number generators or CPU-based hardware random number generators (HRNG). -**Optional** A device such as [OneRNG](https://onerng.info/onerng/) may be used to [increase the speed](https://lwn.net/Articles/648550/) and possibly the quality of available entropy. - -## OneRNG +Optionally, a device such as [OneRNG](https://onerng.info/onerng/) may be used to [increase the speed](https://lwn.net/Articles/648550/) and possibly the quality of available entropy. Configure [rng-tools](https://wiki.archlinux.org/title/Rng-tools): @@ -350,8 +172,13 @@ wget https://github.com/OneRNG/onerng.github.io/raw/master/sw/onerng_3.7-1_all.d Verify the package: ```console -$ sha256sum onerng_3.7-1_all.deb -b7cda2fe07dce219a95dfeabeb5ee0f662f64ba1474f6b9dddacc3e8734d8f57 onerng_3.7-1_all.deb +sha256sum onerng_3.7-1_all.deb +``` + +The value must match: + +```console +b7cda2fe07dce219a95dfeabeb5ee0f662f64ba1474f6b9dddacc3e8734d8f57 ``` Install the package: @@ -370,22 +197,126 @@ sudo atd sudo service rng-tools restart ``` -# Generate keys +# Install software -## Temporary working directory +Load the operating system and configure networking. + +**Note** If the screen locks on Debian Live, unlock with `user` / `live` + +Open terminal and install required software packages. + +**Debian/Ubuntu** + +```console +sudo apt update + +sudo apt -y upgrade + +sudo apt -y install \ + wget gnupg2 gnupg-agent dirmngr \ + cryptsetup scdaemon pcscd \ + yubikey-personalization yubikey-manager +``` + +**Note** Live Ubuntu images [may require modification](https://github.com/drduh/YubiKey-Guide/issues/116) to `/etc/apt/sources.list` and may need additional packages: + +```console +sudo apt -y install libssl-dev swig libpcsclite-dev +``` + +**OpenBSD** + +```console +doas pkg_add gnupg pcsc-tools +``` + +**macOS** + +Download and install [Homebrew](https://brew.sh/) and the following packages: + +```console +brew install \ + gnupg yubikey-personalization ykman pinentry-mac wget +``` + +**Note** An additional Python package dependency may need to be installed to use [`ykman`](https://support.yubico.com/support/solutions/articles/15000012643-yubikey-manager-cli-ykman-user-guide) - `pip install yubikey-manager` + +**NixOS** + +Build an air-gapped NixOS LiveCD image: + +```console +ref=$(git ls-remote https://github.com/drduh/Yubikey-Guide refs/heads/master | awk '{print $1}') + +nix build --experimental-features "nix-command flakes" \ + github:drduh/YubiKey-Guide/$ref#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage +``` + +If you have this repository checked out: + +Recommended, but optional: update `nixpkgs` and `drduh/config`: + +```console +nix flake update --commit-lock-file +``` + +Build the image: + +```console +nix build --experimental-features "nix-command flakes" .#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage +``` + +Copy it to a USB drive: + +```console +sudo cp -v result/iso/yubikeyLive.iso /dev/sdc ; sync +``` + +Skip steps to create a temporary working directory and a hardened configuration, as they are already part of the image. + +**Arch** + +```console +sudo pacman -Syu gnupg pcsclite ccid yubikey-personalization +``` + +**RHEL7** + +```console +sudo yum install -y gnupg2 pinentry-curses pcsc-lite pcsc-lite-libs gnupg2-smime +``` + +**Fedora** + +```console +sudo dnf install wget + +wget https://github.com/rpmsphere/noarch/raw/master/r/rpmsphere-release-38-1.noarch.rpm + +sudo rpm -Uvh rpmsphere-release*rpm + +sudo dnf install \ + gnupg2 dirmngr cryptsetup gnupg2-smime \ + pcsc-tools opensc pcsc-lite secure-delete \ + pgp-tools yubikey-personalization-gui +``` + +# Prepare GnuPG Create a temporary directory which will be cleared on [reboot](https://en.wikipedia.org/wiki/Tmpfs) and set it as the GnuPG directory: ```console -export GNUPGHOME=$(mktemp -d -t gnupg_$(date +%Y%m%d%H%M)_XXX) +GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX) ``` -## Hardened configuration +## Configuration -Import or create a hardened configuration for GnuPG: +Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg.conf): ```console -wget -O $GNUPGHOME/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf +cd $GNUPGHOME + +wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf ``` The options will look similar to: @@ -414,407 +345,106 @@ use-agent throw-keyids ``` -**Tip** Networking can be disabled for the remainder of the setup. +**Note** Networking can be disabled for the remainder of the setup. -# Certify key +## Identity + +When creating an identity with GnuPG, the default options ask for a "Real name", "Email address" and optional "Comment". + +Depending on how you plan to use GnuPG, set these values respectively: + +```console +IDENTITY="YubiKey User " +``` + +Or use any attribute which will uniquely identity the key: + +```console +IDENTITY="My Cool YubiKey - 2024" +``` + +## Expiration + +Determine the desired Subkey validity duration. + +Setting a key expiry forces identity and credential lifecycle management. However, setting an expiry on the primary Certify key is pointless, because it can be used to simply extend itself ([revocation certificates](https://security.stackexchange.com/questions/14718/does-openpgp-key-expiration-add-to-security/79386#79386) should be used instead). + +This guide recommends a two year expiration for Subkeys to balance security and usability, however longer durations are possible to reduce maintenance frequency. + +When Subkeys expire, they may still be used to decrypt with GnuPG and authenticate with SSH, however they can **not** be used to encrypt nor sign new messages. + +Subkeys must be renewed or rotated using the Certify key - see [Updating Subkeys](#updating-subkeys). + +Set the expiration date to two years: + +```console +EXPIRATION=2y +``` + +Or set the expiration date to a specific date to schedule maintenace: + +```console +EXPIRATION=2026-05-01 +``` + +## Passphrase + +Generate a passphrase, which will be used to issue the Certify key and Subkeys. + +The passphrase is recommended to consist of only uppercase letters and numbers for improved readability. [Diceware](https://secure.research.vt.edu/diceware) is another method for creating strong and memorable passphrases. + +The following commands will generate and display a strong passphrase which avoids ambiguous characters: + +```console +PASS=$(LC_ALL=C tr -dc 'A-Z1-9' < /dev/urandom | \ + tr -d "1IOS5U" | fold -w 30 | sed "-es/./ /"{1..26..5} | \ + cut -c2- | tr " " "-" | head -1) + +echo $PASS +``` + +Memorize the passphrase or write it in a secure location, ideally separate from the portable storage device used for key material. This repository includes a [`passphrase.html`](https://raw.githubusercontent.com/drduh/YubiKey-Guide/master/passphrase.html) template to help with transcription. Save the raw file, open it with a browser and print. Use a pen or permanent marker to select a letter or number on each row for each character in the passphrase. + +# Create Certify key The primary key to generate is the Certify key, which will be used to issue Subkeys for encryption, signature and authentication operations. -The Certify key should be kept offline at all times and only accessed from a secure environment to revoke or issue Subkeys. Keys can also be generated on the YubiKey itself to avoid duplication, however for usability and durability reasons this guide recommends against doing so. +The Certify key should be kept offline at all times and only accessed from a dedicated and secure environment to issue or revoke Subkeys. -Generate a passphrase which will be needed throughout the guide to create Subkeys. The passphrase should be memorized or written down in a secure location, ideally separate from the portable storage device used for key material. +This guide recommends 4096-bit RSA. Do not set an expiration date on the Certify key. -The passphrase is recommended to consist of only upper case letters and numbers for improved readability. - -The following command will generate strong passphrases while avoiding ambiguous characters: +Generate the Certify key: ```console -LC_ALL=C tr -dc 'A-Z1-9' < /dev/urandom | \ - tr -d "1IOS5U" | fold -w 30 | head -n10 | \ - sed "-es/./ /"{1..26..5} | cut -c2- | tr " " "-" +gpg --batch --passphrase "$PASS" --quick-generate-key "$IDENTITY" \ + rsa4096 cert never ``` -Example output: +Set the Certify key identifier beginning with `0x` as `KEYID` with the following command, or by entering the value manually: ```console -A4ZK-YRRJ-8WPM-82NY-CX9T-AGKT -PH9Z-HFDX-QDB9-YMMC-GQZB-Z3EV -EC3H-C42G-8E9K-VF7F-ZWT7-BTL6 -B3CA-QCCE-JMNE-VAZG-ZEYD-J3XP -YKP4-M42X-4WWE-WEKR-C3J7-GZYF -ZQWC-E7MN-M7CT-4Y4Z-9QFV-44VY -KY4F-C83Q-BTYQ-V8EM-WGCR-DPZN -GYWQ-WNAC-ERWM-XGAD-6XVD-ZCLD -L8JL-EK8H-Z4ZF-MA93-NND8-FPKA -WM2J-XF7L-QV6D-AWLY-Y2D8-4TQQ +KEYID=$(gpg -K | grep -Po "(0x\w+)") ``` -**Tip** On Linux or OpenBSD, select the passphrase using the mouse or by double-clicking on it to copy to clipboard. Paste using the middle mouse button or `Shift`-`Insert` - -Generate the Certify key with GnuPG: +Set the key fingerprint: ```console -gpg --expert --full-generate-key +KEYFPR=$(gpg --fingerprint "$KEYID" | grep -Eo '([0-9A-F][0-9A-F ]{49})' | head -n 1 | tr -d ' ') ``` -Select `(8) RSA (set your own capabilities)`, then type `E` and `S` to deselect **Encrypt** and **Sign** actions, so the only **Current allowed actions** remaining is **Certify**: +# Create Subkeys + +The following command will generate Signature, Encryption and Authentication Subkeys, using the previously configured passphrase and expiration: ```console -Please select what kind of key you want: - (1) RSA and RSA (default) - (2) DSA and Elgamal - (3) DSA (sign only) - (4) RSA (sign only) - (7) DSA (set your own capabilities) - (8) RSA (set your own capabilities) - (9) ECC and ECC - (10) ECC (sign only) - (11) ECC (set your own capabilities) - (13) Existing key - (14) Existing key from card -Your selection? 8 - -Possible actions for a RSA key: Sign Certify Encrypt Authenticate -Current allowed actions: Sign Certify Encrypt - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? E - -Possible actions for a RSA key: Sign Certify Encrypt Authenticate -Current allowed actions: Sign Certify - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? S - -Possible actions for a RSA key: Sign Certify Encrypt Authenticate -Current allowed actions: Certify - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished +for key_type in sign encrypt auth ; do \ + gpg --batch --pinentry-mode=loopback \ + --passphrase "$PASS" --quick-add-key "$KEYFPR" \ + rsa4096 $key_type "$EXPIRATION" + done ``` -Type `Q` then `4096` as the requested keysize: - -```console -Your selection? Q -RSA keys may be between 1024 and 4096 bits long. -What keysize do you want? (2048) 4096 -Requested keysize is 4096 bits -``` - -Type `0` for key validity - there is no reason to expire the Certify key (see [Note #3](#notes)) - then type `y` to confirm. - -```console -Please specify how long the key should be valid. - 0 = key does not expire - = key expires in n days - w = key expires in n weeks - m = key expires in n months - y = key expires in n years -Key is valid for? (0) 0 -Key does not expire at all -Is this correct? (y/N) y -``` - -Input any value for **Real name** and **Email address**; **Comment** is optional, then type `O` to confirm: - -```console -GnuPG needs to construct a user ID to identify your key. - -Real name: YubiKey User -Email address: yubikey@example -Comment: -You selected this USER-ID: - "YubiKey User " - -Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. -gpg: /tmp/gnupg_202401011200_TnL/trustdb.gpg: trustdb created -gpg: directory '/tmp/gnupg_202401011200_TnL/openpgp-revocs.d' created -gpg: revocation certificate stored as '/tmp/gnupg_202401011200_TnL/openpgp-revocs.d/4E2C1FA3372CBA96A06AC34AF0F2CFEB04341FB5.rev' -public and secret key created and signed. - -pub rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C] - Key fingerprint = 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 -uid YubiKey User -``` - -Export the Certify key identifier beginning with `0x` as `KEYID` with the following command or by pasting the value manually: - -```console -export KEYID=$(gpg -K | grep -Po "(0x\w+)") -``` - -**Optional** Existing keys may be used to sign new ones to prove ownership. Export the existing key to the working keyring and sign the new key: - -```console -gpg --export-secret-keys --armor --output /tmp/new.sec - -gpg --default-key $OLDKEY --sign-key $KEYID -``` - -# Subkeys - -Edit the identity to add Subkeys: - -```console -gpg --expert --edit-key $KEYID -``` - -RSA with 4096-bit key length is recommended. - -Subkeys are recommended to have one or several year expirations. They must be renewed or replaced using the Certify key - see [Rotating keys](#rotating-keys). - -## Signature key - -Generate a Signature key by typing `addkey` then `4` to select the `(4) RSA (sign only)` option: - -```console -gpg> addkey -Please select what kind of key you want: - (3) DSA (sign only) - (4) RSA (sign only) - (5) Elgamal (encrypt only) - (6) RSA (encrypt only) - (7) DSA (set your own capabilities) - (8) RSA (set your own capabilities) - (10) ECC (sign only) - (11) ECC (set your own capabilities) - (12) ECC (encrypt only) - (13) Existing key - (14) Existing key from card -Your selection? 4 -RSA keys may be between 1024 and 4096 bits long. -What keysize do you want? (3072) 4096 -Requested keysize is 4096 bits -Please specify how long the key should be valid. - 0 = key does not expire - = key expires in n days - w = key expires in n weeks - m = key expires in n months - y = key expires in n years -Key is valid for? (0) 2y -Is this correct? (y/N) y -Really create? (y/N) y -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -[ultimate] (1). YubiKey User -``` - -## Encryption key - -Generate an Encryption key by typing `addkey` then `6` to select the `(6) RSA (encrypt only)` option: - -```console -gpg> addkey -Please select what kind of key you want: - (3) DSA (sign only) - (4) RSA (sign only) - (5) Elgamal (encrypt only) - (6) RSA (encrypt only) - (7) DSA (set your own capabilities) - (8) RSA (set your own capabilities) - (10) ECC (sign only) - (11) ECC (set your own capabilities) - (12) ECC (encrypt only) - (13) Existing key - (14) Existing key from card -Your selection? 6 -RSA keys may be between 1024 and 4096 bits long. -What keysize do you want? (3072) 4096 -Requested keysize is 4096 bits -Please specify how long the key should be valid. - 0 = key does not expire - = key expires in n days - w = key expires in n weeks - m = key expires in n months - y = key expires in n years -Key is valid for? (0) 2y -Is this correct? (y/N) y -Really create? (y/N) y -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -[ultimate] (1). YubiKey User -``` - -## Authentication key - -Generate an Authentication key by typing `addkey` then `8` to select the `(8) RSA (set your own capabilities)` option. - -**Note** Newer versions of GnuPG may set a Restricted flag on the Authenticate key (see [issue 421](https://github.com/drduh/YubiKey-Guide/issues/421)) - set the **Authenticate** action with `=A` instead. - -Toggle the required capabilities with `S`, `E` and `A` until **Authenticate** is the only allowed action: - -```console -gpg> addkey -Please select what kind of key you want: - (3) DSA (sign only) - (4) RSA (sign only) - (5) Elgamal (encrypt only) - (6) RSA (encrypt only) - (7) DSA (set your own capabilities) - (8) RSA (set your own capabilities) - (10) ECC (sign only) - (11) ECC (set your own capabilities) - (12) ECC (encrypt only) - (13) Existing key - (14) Existing key from card -Your selection? 8 - -Possible actions for a RSA key: Sign Encrypt Authenticate -Current allowed actions: Sign Encrypt - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? S - -Possible actions for a RSA key: Sign Encrypt Authenticate -Current allowed actions: Encrypt - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? E - -Possible actions for a RSA key: Sign Encrypt Authenticate -Current allowed actions: - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? A - -Possible actions for a RSA key: Sign Encrypt Authenticate -Current allowed actions: Authenticate - - (S) Toggle the sign capability - (E) Toggle the encrypt capability - (A) Toggle the authenticate capability - (Q) Finished - -Your selection? Q -RSA keys may be between 1024 and 4096 bits long. -What keysize do you want? (2048) 4096 -Requested keysize is 4096 bits -Please specify how long the key should be valid. - 0 = key does not expire - = key expires in n days - w = key expires in n weeks - m = key expires in n months - y = key expires in n years -Key is valid for? (0) 2y -Is this correct? (y/N) y -Really create? (y/N) y -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1). YubiKey User -``` - -Finish by saving Subkeys: - -```console -gpg> save - -gpg> quit -``` - -**Optional** To add additional email addresses or identities, use `adduid` - -Edit the identity: - -```console -gpg --expert --edit-key $KEYID -``` - -Add the new identity: - -```console -gpg> adduid -Real name: YubiKey User -Email address: yubikey@somewhere -Comment: -You selected this USER-ID: - "YubiKey User " - -Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1) YubiKey User -[ unknown] (2). YubiKey User -``` - -Then configure ultimate trust for the new identity: - -```console -gpg> trust -[...] -Your decision? 5 -Do you really want to set this key to ultimate trust? (y/N) y -[...] -gpg> save -``` - -By default, the latest identity added will be the primary user ID. To change it, select `uid 2` or equivalent and `primary` - -# Verify +# Verify keys List available secret keys: @@ -822,7 +452,7 @@ List available secret keys: gpg -K ``` -The output will display Certify, Signature, Encryption and Authentication keys, for example: +The output will display **[C]ertify, [S]ignature, [E]ncryption and [A]uthentication** keys: ```console sec rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C] @@ -833,141 +463,109 @@ ssb rsa4096/0x30CBE8C4B085B9F7 2024-01-01 [E] [expires: 2026-01-01] ssb rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-01-01] ``` -**Optional** Verify with a OpenPGP [key best practice checker](https://riseup.net/en/security/message-security/openpgp/best-practices#openpgp-key-checks): +# Backup keys + +Save a copy of the Certify key and Subkeys: ```console -gpg --export $KEYID | hokey lint +gpg --output $GNUPGHOME/$KEYID-Certify.key \ + --batch --pinentry-mode=loopback --passphrase "$PASS" \ + --armor --export-secret-keys $KEYID + +gpg --output $GNUPGHOME/$KEYID-Subkeys.key \ + --batch --pinentry-mode=loopback --passphrase "$PASS" \ + --armor --export-secret-subkeys $KEYID + +gpg --output $GNUPGHOME/$KEYID.asc \ + --armor --export $KEYID ``` -hokey may warn (orange text) about cross certification for the Authentication key. GnuPG [Signing Subkey Cross-Certification](https://gnupg.org/faq/subkey-cross-certify.html) documentation has more detail on cross certification, and version 2.2.1 notes "subkey does not sign and so does not need to be cross-certified". - -hokey may also indicate a problem (red text) with `Key expiration times: []` on the primary key - see [Note #3](#notes). - -# Export secret keys - -Save a copy of all keys: - -```console -gpg --armor --export-secret-keys $KEYID > $GNUPGHOME/certify.key - -gpg --armor --export-secret-subkeys $KEYID > $GNUPGHOME/subkeys.key -``` - -On Windows, note that using any extension other than `.gpg` or attempting IO redirection to a file will garble the secret key, making it impossible to import it again at a later date: - -```console -gpg -o \path\to\dir\certify.gpg --armor --export-secret-keys $KEYID - -gpg -o \path\to\dir\subkeys.gpg --armor --export-secret-subkeys $KEYID -``` - -# Revocation certificate - -Although the Certify key may be backed up to a secure place, the possibility of losing it cannot be ruled out. Without the Certify key, it will be impossible to renew or rotate Subkeys or generate a revocation certificate; the PGP identity will be useless. To mitigate this risk, deprecate an orphaned identity with a revocation certificate. - -To create one: - -``` console -gpg --output $GNUPGHOME/revoke.asc --gen-revoke $KEYID -``` - -The `revoke.asc` file should be stored in a secondary location to the primary backup. - -# Backup - Create an **encrypted** backup on portable storage to be kept offline in a secure and durable location. - + +The following process is recommended to be repeated several times on multiple portable storage devices, as they can fail over time. As an additional backup measure, [Paperkey](https://www.jabberwocky.com/software/paperkey/) may be used to make a physical copy of key materials for improved durability. + **Tip** The [ext2](https://en.wikipedia.org/wiki/Ext2) filesystem without encryption can be mounted on Linux and OpenBSD. Use [FAT32](https://en.wikipedia.org/wiki/Fat32) or [NTFS](https://en.wikipedia.org/wiki/Ntfs) filesystem for macOS and Windows compatibility instead. -As an additional backup measure, use [Paperkey](https://www.jabberwocky.com/software/paperkey/) to make a physical copy of materials. See [Linux Kernel Maintainer PGP Guide](https://www.kernel.org/doc/html/latest/process/maintainer-pgp-guide.html#back-up-your-master-key-for-disaster-recovery) for more information. - -It is strongly recommended to keep even encrypted OpenPGP private key material offline to deter [key overwriting attacks](https://www.kopenpgp.com/), for example. - **Linux** -Attach another portable storage device and check its label: +Attach a portable storage device and check its label, in this case `/dev/sdc`: ```console $ sudo dmesg | tail -mmc0: new high speed SDHC card at address a001 -mmcblk0: mmc0:a001 SS16G 14.8 GiB +usb-storage 3-2:1.0: USB Mass Storage device detected +sd 2:0:0:0: [sdc] Attached SCSI removable disk -$ sudo fdisk -l /dev/mmcblk0 -Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors -Units: sectors of 1 * 512 = 512 bytes -Sector size (logical/physical): 512 bytes / 512 bytes -I/O size (minimum/optimal): 512 bytes / 512 bytes +$ sudo fdisk -l /dev/sdc +Disk /dev/sdc: 14.9 GiB, 15931539456 bytes, 31116288 sectors ``` -Write it with random data to prepare for encryption: +**Warning** Confirm the destination (`of`) before issuing the following command! This guide uses `/dev/sdc` throughout, but this value may differ on your system. + +Zero the header to prepare for encryption: ```console -sudo dd if=/dev/urandom of=/dev/mmcblk0 bs=4M status=progress +sudo dd if=/dev/zero of=/dev/sdc bs=4M count=1 ``` Erase and create a new partition table: ```console -$ sudo fdisk /dev/mmcblk0 - -Welcome to fdisk (util-linux 2.33.1). - -Command (m for help): g -Created a new GPT disklabel (GUID: 4E7495FD-85A3-3E48-97FC-2DD8D41516C3). - -Command (m for help): w -The partition table has been altered. -Calling ioctl() to re-read partition table. -Syncing disks. - +sudo fdisk /dev/sdc < q No label changes ``` -Encrypt with bioctl: +Encrypt with bioctl using a unique [Passphrase](#passphrase): ```console $ doas bioctl -c C -l sd2a softraid0 @@ -1055,10 +653,10 @@ doas mkdir /mnt/encrypted-storage doas mount /dev/sd3i /mnt/encrypted-storage -doas cp -avi $GNUPGHOME /mnt/encrypted-storage +doas cp -av $GNUPGHOME /mnt/encrypted-storage ``` -**Note** To set up multiple YubiKeys, keep the backup mounted or remember to terminate GnuPG before [saving](https://lists.gnupg.org/pipermail/gnupg-users/2016-July/056353.html). +**Note** To set up multiple YubiKeys, keep the backup mounted or terminate GnuPG before [saving](https://lists.gnupg.org/pipermail/gnupg-users/2016-July/056353.html). Otherwise, unmount and disconnect the encrypted volume: @@ -1072,42 +670,42 @@ See [OpenBSD FAQ#14](https://www.openbsd.org/faq/faq14.html#softraidCrypto) for # Export public key -**Important** Without the public key, it will **not** be possible to use GnuPG to decrypt and sign messages. However, YubiKey can still be used for SSH authentication. +**Important** Without the public key, it will **not** be possible to use GnuPG to decrypt nor sign messages. However, YubiKey can still be used for SSH authentication. Create another partition on the portable storage device to store the public key, or reconnect networking and upload to a key server. **Linux** -Provision the portable storage device: +Using the same `/dev/sdc` device as in the previous step, create a small (at least 20 Mb is recommended) partition for storing materials: ```console -$ sudo fdisk /dev/mmcblk0 +sudo fdisk /dev/sdc < admin - -gpg/card> url -URL to retrieve public key: hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=0xFF00000000000000 - -gpg/card> quit -``` - # Configure YubiKey -Insert YubiKey and use GnuPG to configure it: +If the card is locked, [Reset](#reset) it. -```console -gpg --card-edit -``` - -Enter administrative mode: - -```console -gpg/card> admin -Admin commands are allowed -``` - -**Note** If the card is locked, see [Reset](#reset). - -**Windows** - -Use the [YubiKey Manager](https://developers.yubico.com/yubikey-manager) application (note, this is not the similarly named older YubiKey NEO Manager) to enable CCID functionality. +**Windows** Use the [YubiKey Manager](https://developers.yubico.com/yubikey-manager) application (note, this is not the similarly named older YubiKey NEO Manager) to enable CCID functionality. ## Enable KDF @@ -1204,189 +752,151 @@ Key Derived Function (KDF) enables YubiKey to store the hash of PIN, preventing **Note** This feature may not be compatible with older GnuPG versions, especially mobile clients. These incompatible clients will not function because the PIN will always be rejected. +Enable KDF using the default Admin pin of `12345678`: + ```console -gpg/card> kdf-setup +gpg --command-fd=0 --pinentry-mode=loopback --card-edit < passwd -gpg: OpenPGP card no. D2760001240102010006055532110000 detected +ADMIN_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w8 | head -1) -1 - change PIN -2 - unblock PIN -3 - change Admin PIN -4 - set the Reset Code -Q - quit +USER_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w6 | head -1) -Your selection? 3 -PIN changed. - -1 - change PIN -2 - unblock PIN -3 - change Admin PIN -4 - set the Reset Code -Q - quit - -Your selection? 1 -PIN changed. - -1 - change PIN -2 - unblock PIN -3 - change Admin PIN -4 - set the Reset Code -Q - quit - -Your selection? q +echo "\nAdmin PIN: $ADMIN_PIN\nUser PIN: $USER_PIN" ``` -**Note** The number of retry attempts can be changed later with the following command, documented [here](https://docs.yubico.com/software/yubikey/tools/ykman/OpenPGP_Commands.html#ykman-openpgp-access-set-retries-options-pin-retries-reset-code-retries-admin-pin-retries): - -```bash -ykman openpgp access set-retries 5 5 5 -f -a YOUR_ADMIN_PIN -``` - -## Set information - -While still in administrative mode: +Update the Admin PIN: ```console -gpg/card> list - -gpg/card> name -Cardholder's surname: User -Cardholder's given name: YubiKey - -gpg/card> lang -Language preferences: en - -gpg/card> login -Login data (account name): yubikey@example - -gpg/card> quit +gpg --command-fd=0 --pinentry-mode=loopback --change-pin < key 1 - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb* rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1). YubiKey User - -gpg> keytocard -Please select where to store the key: - (1) Signature key - (3) Authentication key -Your selection? 1 +gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID < key 1 - -gpg> key 2 - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb* rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1). YubiKey User - -gpg> keytocard -Please select where to store the key: - (2) Encryption key -Your selection? 2 +gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID < key 2 - -gpg> key 3 - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb* rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1). YubiKey User - -gpg> keytocard -Please select where to store the key: - (3) Authentication key -Your selection? 3 -``` - -Save and quit: - -```console -gpg> save +gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID <` with `gpg -K`, for example: +Verify Subkeys have been moved to YubiKey with `gpg -K` and look for `ssb>`, for example: ```console sec rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C] @@ -1399,61 +909,22 @@ ssb> rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-01-01] A `>` after a tag indicates the key is stored on a smart card. -# Multiple YubiKeys +# Finish setup -To provision additional YubiKeys, restore the Certify key backup and repeat [Configure YubiKey](#configure-yubikey). +Verify you have done the following: -```console -mv -vi $GNUPGHOME $GNUPGHOME.1 +- [ ] Memorized or wrote down the Certify key passphrase to a secure and durable location +- [ ] Saved the Certify key and Subkeys to encrypted portable storage, to be kept offline +- [ ] Memorized or wrote down passphrase to encrypted volume on portable storage +- [ ] Exported a copy of the public key where is can be easily accessed later +- [ ] Memorized or wrote down the User Pin and Admin PIN, which are unique and changed from default values +- [ ] Moved Encryption, Signature and Authentication Subkeys to YubiKey (`gpg -K` shows `ssb>` for 3 Subkeys) -cp -avi /mnt/encrypted-storage/tmp.XXX $GNUPGHOME +Reboot to clear the ephemeral environment and complete setup. -cd $GNUPGHOME -``` +The YubiKey(s) are now ready for use. -## Switching between YubiKeys - -When a GnuPG key is added to YubiKey using `keytocard`, the key is deleted from the keyring and a **stub** is added, pointing to the YubiKey. The stub identifies the GnuPG key ID and YubiKey serial number. - -When the operation is repeated for an additional YubiKey, the stub is overwritten and will now point to the latest YubiKey. - -GnuPG will request a specific YubiKey by serial number, as referenced by the stub, and will not recognize another YubiKey with a different serial number without manual intervention. - -Insert the first YubiKey (which has a different serial number) and run the following command: - -```console -gpg-connect-agent "scd serialno" "learn --force" /bye -``` - -GnuPG will scan the first YubiKey for keys and recreate the stubs to point to the key ID and YubiKey serial number of the first YubiKey. - -To use the second YubiKey, repeat the command. - - -# Finish - -Before completing setup, verify the following: - -- [ ] Saved Encryption, Signature and Authentication Subkeys to YubiKey (`gpg -K` will show `ssb>` for 3 Subkeys) -- [ ] Saved YubiKey user and admin PINs, which are unique and were changed from default values -- [ ] Saved Certify key passphrase to a secure and durable location -- [ ] Saved Certify key, Subkeys and revocation certificate on encrypted portable storage, to be kept offline -- [ ] Saved passphrase to encrypted volume on portable storage -- [ ] Saved copy of public key where is can be easily accessed later - -Reboot to finish. - -If an ephemeral environment was not used for setup, delete secret keys from the keyring and [securely delete](https://srm.sourceforge.net/) `$GNUPGHOME` - -```console -gpg --delete-secret-key $KEYID - -sudo srm -r $GNUPGHOME || sudo rm -rf $GNUPGHOME - -unset GNUPGHOME -``` - -# Using keys +# Using YubiKey Initialize GnuPG: @@ -1461,18 +932,12 @@ Initialize GnuPG: gpg -k ``` -Change the working directory: +Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg.conf): ```console cd ~/.gnupg -``` -Download [drduh/config/gpg.conf](https://github.com/drduh/config/blob/master/gpg.conf): - -```console wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf - -chmod 600 gpg.conf ``` Set the following option. This avoids the problem where GnuPG will prompt, repeatedly, for the insertion of an already-inserted YubiKey: @@ -1485,30 +950,40 @@ echo "disable-ccid" >>scdaemon.conf > The `disable-ccid` option is only required for GnuPG versions 2.3 or later. However, setting this option does not appear to interfere with the operation of earlier versions of GnuPG so it is recommended for all installations. -Install the required packages and mount the non-encrypted volume created earlier: +Install the required packages: -**Linux** +**Debian and Ubuntu** ```console sudo apt update sudo apt install -y gnupg2 gnupg-agent gnupg-curl scdaemon pcscd - -sudo mount /dev/mmcblk0p2 /mnt ``` **OpenBSD** +Requires a reboot. + ```console doas pkg_add gnupg pcsc-tools -doas mount /dev/sd2b /mnt +doas rcctl enable pcscd + +doas reboot ``` -Import the public key file: +Mount the non-encrypted volume with the public key: ```console -gpg --import /mnt/gpg-0x*.asc +doas mkdir /mnt/public + +doas mount /dev/sd3i /mnt/public +``` + +Import it: + +```console +gpg --import /mnt/public/0x*.asc ``` Or download the public key from a keyserver: @@ -1525,28 +1000,26 @@ gpg/card> fetch gpg/card> quit ``` -Edit the Certify key: +Determine the key ID: ```console -export KEYID=0xF0F2CFEB04341FB5 - -gpg --edit-key $KEYID +KEYID=0xF0F2CFEB04341FB5 ``` -Assign ultimate trust by typing `trust` and selecting option `5`: +Assign ultimate trust by typing `trust` and selecting option `5` then `quit`: ```console -gpg> trust - -Your decision? 5 -Do you really want to set this key to ultimate trust? (y/N) y - -gpg> quit +gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID < rsa4096/0xAD9E24E1B8CB9600 created: 2024-01-01 expires: 2026-01-01 **Note** If `General key info..: [none]` appears in the output instead - go back and import the public key using the previous step. -Encrypt a message to yourself (useful for storing credentials): +## Encryption + +Encrypt a message to yourself (useful for storing credentials or protecting backups): ```console -echo "test message string" | gpg --encrypt --armor --recipient $KEYID -o encrypted.txt +echo "\ntest message string" | \ + gpg --encrypt --armor --recipient $KEYID -o encrypted.txt ``` -To encrypt to multiple recipients or keys (the preferred key ID should be last): +To encrypt to multiple recipients or keys (the preferred key ID goes last): ```console echo "test message string" | \ @@ -1601,47 +1077,30 @@ echo "test message string" | \ -o encrypted.txt ``` -Decrypt the message: +Decrypt the message - a User PIN prompt will appear: ```console -$ gpg --decrypt --armor encrypted.txt -gpg: anonymous recipient; trying secret key 0x0000000000000000 ... -gpg: okay, we are the anonymous recipient. -gpg: encrypted with RSA key, ID 0x0000000000000000 -test message string -``` - -Sign a message: - -```console -echo "test message string" | gpg --armor --clearsign > signed.txt -``` - -Verify the signature: - -```console -$ gpg --verify signed.txt -gpg: Signature made Mon 01 Jan 2024 12:00:00 PM UTC -gpg: using RSA key CF5A305B808B7A0F230DA064B3CD10E502E19637 -gpg: Good signature from "YubiKey User " [ultimate] -Primary key fingerprint: 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 - Subkey fingerprint: CF5A 305B 808B 7A0F 230D A064 B3CD 10E5 02E1 9637 +gpg --decrypt --armor encrypted.txt ``` Use a [shell function](https://github.com/drduh/config/blob/master/zshrc) to make encrypting files easier: -``` +```console secret () { - output=~/"${1}".$(date +%s).enc - gpg --encrypt --armor --output ${output} -r 0x0000 -r 0x0001 -r 0x0002 "${1}" && echo "${1} -> ${output}" + output=~/"${1}".$(date +%s).enc + gpg --encrypt --armor --output ${output} \ + -r $KEYID "${1}" && echo "${1} -> ${output}" } reveal () { - output=$(echo "${1}" | rev | cut -c16- | rev) - gpg --decrypt --output ${output} "${1}" && echo "${1} -> ${output}" + output=$(echo "${1}" | rev | cut -c16- | rev) + gpg --decrypt --output ${output} "${1}" && \ + echo "${1} -> ${output}" } ``` +Example output: + ```console $ secret document.pdf document.pdf -> document.pdf.1580000000.enc @@ -1653,213 +1112,73 @@ gpg: encrypted with RSA key, ID 0x0000000000000000 document.pdf.1580000000.enc -> document.pdf ``` -# Rotating keys +[drduh/Purse](https://github.com/drduh/Purse) is a password manager based on GnuPG and YubiKey to securely store and use credentials. -PGP does not provide [forward secrecy](https://en.wikipedia.org/wiki/Forward_secrecy) - a compromised key may be used to decrypt all past messages. Although keys stored on YubiKey are difficult to exploit, it is not impossible; the key and PIN could be physically compromised, or a vulnerability may be discovered in firmware or in the random number generator used to create keys, for example. Therefore, it is good practice to rotate Subkeys periodically. +## Signature -When a Subkey expires, it can either be renewed or replaced. Both actions require access to the Certify key. - -- Renewing Subkeys by updating expiration indicates continued possession of the Certify key and is more convenient. - -- Replacing Subkeys is less convenient but potentially more secure: the new Subkeys will **not** be able to decrypt previous messages, authenticate with SSH, etc. Contacts will need to receive the updated public key and any encrypted secrets need to be decrypted and re-encrypted to new Subkeys to be usable. This process is functionally equivalent to losing the YubiKey and provisioning a new one. - -Neither rotation method is superior and it is up to personal philosophy on identity management and individual threat modeling to decide which one to use, or whether to expire Subkeys at all. Ideally, Subkeys would be ephemeral: used only once for each unique encryption, signature and authentication event, however in practice that is not really practical nor worthwhile with YubiKey. Advanced users may dedicate an air-gapped machine for frequent credential rotation. - -## Setup environment - -To renew or rotate Subkeys, follow the same process as generating keys: boot to a secure environment, install required software and disconnect networking. - -Connect the portable storage device with the Certify key and identify the disk label: +Sign a message: ```console -$ sudo dmesg | tail -mmc0: new high speed SDHC card at address a001 -mmcblk0: mmc0:a001 SS16G 14.8 GiB (ro) -mmcblk0: p1 p2 +echo "test message string" | gpg --armor --clearsign > signed.txt ``` -Decrypt and mount the encrypted volume: +Verify the signature: ```console -sudo cryptsetup luksOpen /dev/mmcblk0p1 secret - -sudo mount /dev/mapper/secret /mnt/encrypted-storage +gpg --verify signed.txt ``` -Import the Certify key and configuration to a temporary working directory. +The output will be similar to: ```console -export GNUPGHOME=$(mktemp -d -t gnupg_$(date +%Y%m%d%H%M)_XXX) - -gpg --import /mnt/encrypted-storage/tmp.XXX/certify.key - -cp -v /mnt/encrypted-storage/tmp.XXX/gpg.conf $GNUPGHOME +gpg: Signature made Mon 01 Jan 2024 12:00:00 PM UTC +gpg: using RSA key CF5A305B808B7A0F230DA064B3CD10E502E19637 +gpg: Good signature from "YubiKey User " [ultimate] +Primary key fingerprint: 4E2C 1FA3 372C BA96 A06A C34A F0F2 CFEB 0434 1FB5 + Subkey fingerprint: CF5A 305B 808B 7A0F 230D A064 B3CD 10E5 02E1 9637 ``` -Edit the Certify key: +## Configure touch + +**Note** This is not possible on YubiKey NEO. + +By default, YubiKey will perform cryptographic operations without requiring any action from the user after the key is unlocked once with the PIN. + +To require a touch for each key operation, use [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and the Admin PIN to set policy: + +Encryption: ```console -export KEYID=0xF0F2CFEB04341FB5 - -gpg --expert --edit-key $KEYID +ykman openpgp keys set-touch dec on ``` -## Renewing Subkeys +**Note** Versions of YubiKey Manager before 5.1.0 use `enc` instead of `dec` for encryption. Older versions of YubiKey Manager use `touch` instead of `set-touch` -To renew Subkeys, the expiry time associated with the corresponding public key will need to be updated, which will require access to the Certify key. - -Start by editing the identity: +Signature: ```console -gpg --edit-key $KEYID +ykman openpgp keys set-touch sig on ``` -Select all expired keys: +Authentication: ```console -gpg> key 1 - -gpg> key 2 - -gpg> key 3 - -sec rsa4096/0xF0F2CFEB04341FB5 - created: 2024-01-01 expires: never usage: C - trust: ultimate validity: ultimate -ssb* rsa4096/0xB3CD10E502E19637 - created: 2024-01-01 expires: 2026-01-01 usage: S -ssb* rsa4096/0x30CBE8C4B085B9F7 - created: 2024-01-01 expires: 2026-01-01 usage: E -ssb* rsa4096/0xAD9E24E1B8CB9600 - created: 2024-01-01 expires: 2026-01-01 usage: A -[ultimate] (1). YubiKey User +ykman openpgp keys set-touch aut on ``` -Use `expire` to configure the expiration date. This will **not** expire valid keys. +To view and adjust policy options: ```console -gpg> expire -Changing expiration time for a subkey. -Please specify how long the key should be valid. - 0 = key does not expire - = key expires in n days - w = key expires in n weeks - m = key expires in n months - y = key expires in n years -Key is valid for? (0) +ykman openpgp keys set-touch -h ``` -Set the expiration date, then `save` +`Cached` or `Cached-Fixed` may be desirable for YubiKey use with email clients. -Next, [Export public keys](#export-public-keys): +YubiKey will blink when it is waiting for a touch. On Linux, [maximbaz/yubikey-touch-detector](https://github.com/maximbaz/yubikey-touch-detector) can be used to indicate YubiKey is waiting for a touch. -```console -gpg --armor --export $KEYID > $KEYID-$(date +%F).asc -``` +## SSH -Transfer the public key to the destination host, and then import it: - -```console -gpg --import 0x*.asc -``` - -Alternatively, publish to a public key server to update the expiration: - -```console -gpg --send-key $KEYID -``` - -Download the public key with updated expiration: - -```console -gpg --recv $KEYID -``` - -The validity of the GnuPG identity will be extended, allowing it to be used again for encryption, signature and authentication operations. The SSH public key does **not** need to be updated on remote hosts. - -## Rotating keys - -Follow the original procedure to generate and add [Subkeys](#subkeys). - -Previous Subkeys may be kept or deleted from the identity. - -Finish by exporting new keys: - -```console -gpg --armor --export-secret-keys $KEYID > $GNUPGHOME/certify.key - -gpg --armor --export-secret-subkeys $KEYID > $GNUPGHOME/subkeys.key -``` - -Copy the **new** temporary working directory to encrypted storage, which should still be mounted: - -```console -sudo cp -avi $GNUPGHOME /mnt/encrypted-storage -``` - -There should now be at least two versions of the Certify and Subkeys: - -```console -ls /mnt/encrypted-storage -``` - -Unmount and close the encrypted volume: - -```console -sudo umount /mnt/encrypted-storage - -sudo cryptsetup luksClose /dev/mapper/secret -``` - -Export the updated public key: - -```console -sudo mkdir /mnt/public - -sudo mount /dev/mmcblk0p2 /mnt/public - -gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc - -sudo umount /mnt/public -``` - -Disconnect the storage device and follow the original steps to transfer new Subkeys (4, 5 and 6) to YubiKey, replacing existing ones. Reboot or securely erase the GnuPG temporary working directory. - -# Adding notations - -Notations can be added to user ID(s) and can be used in conjunction with [Keyoxide](https://keyoxide.org) to create [OpenPGP identity proofs](https://docs.keyoxide.org/wiki/identity-proof-formats/). - -Adding notations requires access to the Certify key. - -After configuring the environment, follow any of the guides listed under "Adding proofs" in the Keyoxide ["Guides"](https://keyoxide.org/guides/) page up until the notation is saved using the `save` command. - -Export the public key: - -```console -gpg --export $KEYID > pubkey.asc -``` - -Transfer the public key and import it: - -```console -gpg --import pubkey.asc -``` - -Use `showpref` to verify notions were correctly added. - -# SSH - -**Tip** YubiKey can be used directly for SSH only, without GnuPG features, starting in [OpenSSH v8.2](https://www.openssh.com/txt/release-8.2). For more information, see [vorburger/ed25519-sk.md](https://github.com/vorburger/vorburger.ch-Notes/blob/develop/security/ed25519-sk.md) and [Yubico - GitHub now supports SSH security keys](https://www.yubico.com/blog/github-now-supports-ssh-security-keys/). - -[gpg-agent](https://wiki.archlinux.org/title/GnuPG#SSH_agent) supports the OpenSSH ssh-agent protocol (`enable-ssh-support`) as well as PuTTy's Pageant on Windows (`enable-putty-support`). This means it can be used instead of the traditional ssh-agent / pageant. There are some differences from ssh-agent, notably that gpg-agent does not _cache_ keys rather it converts, encrypts and stores them persistently as keys, then makes them available to ssh clients. Any existing ssh private keys should be deleted after importing to GnuPG agent. - -When importing the key to `gpg-agent`, a passphrase will be required to encrypt within the key store. GnuPG can cache both passphrases with `cache-ttl` options. Note than when removing the old private key after importing to `gpg-agent`, keep the `.pub` key file around for use in specifying ssh identities (e.g. `ssh -i /path/to/identity.pub`). - -Missing from `gpg-agent` ssh agent support is the ability to remove keys. `ssh-add -d/-D` have no effect. Instead, use the `gpg-connect-agent` utility to lookup a keygrip, match it with the desired ssh key fingerprint (as an MD5) and then delete that keygrip. The [gnupg-users mailing list](https://lists.gnupg.org/pipermail/gnupg-users/2016-August/056499.html) has more information. - -## Create configuration - -Create a hardened configuration for gpg-agent by downloading [drduh/config/gpg-agent.conf](https://github.com/drduh/config/blob/master/gpg-agent.conf): +Import or create a [hardened configuration](https://github.com/drduh/config/blob/master/gpg-agent.conf): ```console cd ~/.gnupg @@ -1869,241 +1188,80 @@ wget https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf **Important** The `cache-ttl` options do **not** apply when using YubiKey as a smart card, because the PIN is [cached by the smart card itself](https://dev.gnupg.org/T3362). To clear the PIN from cache (equivalent to `default-cache-ttl` and `max-cache-ttl`), unplug YubiKey, or set `forcesig` when editing the card to be prompted for the PIN each time. -**Tip** Set `pinentry-program /usr/bin/pinentry-gnome3` for a GUI-based prompt. If the _pinentry_ graphical dialog doesn't show and this error appears: `sign_and_send_pubkey: signing failed: agent refused operation`, install the `dbus-user-session` package and restart the computer for the `dbus` user session to be fully inherited; this is because behind the scenes, `pinentry` complains about `No $DBUS_SESSION_BUS_ADDRESS found`, falls back to `curses` but doesn't find the expected `tty`. +**Tip** Set `pinentry-program` to `/usr/bin/pinentry-gnome3` for a GUI-based prompt. -On macOS, use `brew install pinentry-mac` and set the program path to `pinentry-program /usr/local/bin/pinentry-mac` for Intel Macs, `/opt/homebrew/bin/pinentry-mac` for ARM/Apple Silicon Macs or `pinentry-program /usr/local/MacGPG2/libexec/pinentry-mac.app/Contents/MacOS/pinentry-mac` if using MacGPG Suite. For the configuration to take effect, run `gpgconf --kill gpg-agent` +**macOS** -## Replace agents +Install pinentry with `brew install pinentry-mac` then edit `gpg-agent.conf` to set the `pinentry-program` path to: -To launch `gpg-agent` for use by SSH, use the `gpg-connect-agent /bye` or `gpgconf --launch gpg-agent` commands. +* Apple Silicon Macs: `/opt/homebrew/bin/pinentry-mac` +* Intel Macs: `/usr/local/bin/pinentry-mac` +* MacGPG Suite: `/usr/local/MacGPG2/libexec/pinentry-mac.app/Contents/MacOS/pinentry-mac` -Add the following to the shell rc file: +Then run `gpgconf --kill gpg-agent` for the change to take effect. + +To use graphical applications on macOS, [additional setup is required](https://jms1.net/yubikey/make-ssh-use-gpg-agent.md). + +Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent.plist` with the following contents: + +``` + + + + + Label + gnupg.gpg-agent + RunAtLoad + + KeepAlive + + ProgramArguments + + /usr/local/MacGPG2/bin/gpg-connect-agent + /bye + + + +``` + +Load it: ```console -export GPG_TTY="$(tty)" -export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" -gpg-connect-agent updatestartuptty /bye > /dev/null +launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent.plist ``` -On modern systems, `gpgconf --list-dirs agent-ssh-socket` will automatically set `SSH_AUTH_SOCK` to the correct value and is better than hard-coding to `run/user/$UID/gnupg/S.gpg-agent.ssh`, if available: +Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist` with the following contens: + +``` + + + + + Label + gnupg.gpg-agent-symlink + ProgramArguments + + /bin/sh + -c + /bin/ln -sf $HOME/.gnupg/S.gpg-agent.ssh $SSH_AUTH_SOCK + + RunAtLoad + + + +``` + +Load it: ```console -export GPG_TTY="$(tty)" -export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) -gpgconf --launch gpg-agent +launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist ``` -For fish, `config.fish` should look like this (consider putting them into the `is-interactive` block): - -```fish -set -x GPG_TTY (tty) -set -x SSH_AUTH_SOCK (gpgconf --list-dirs agent-ssh-socket) -gpgconf --launch gpg-agent -``` - -When using `ForwardAgent` for ssh-agent forwarding, `SSH_AUTH_SOCK` only needs to be set on the *local* host, where YubiKey is connected. On the *remote* host, `ssh` will set `SSH_AUTH_SOCK` to something like `/tmp/ssh-mXzCzYT2Np/agent.7541` upon connection. Do **not** set `SSH_AUTH_SOCK` on the remote host - doing so will break [SSH Agent Forwarding](#remote-machines-ssh-agent-forwarding). - -For `S.gpg-agent.ssh` (see [SSH Agent Forwarding](#remote-machines-ssh-agent-forwarding) for more info), `SSH_AUTH_SOCK` should also be set on the *remote*. However, `GPG_TTY` should not be set on the *remote*, explanation specified in that section. - -## Copy public key - -**Note** It is **not** necessary to import the GnuPG public key in order to use SSH. - -Copy and paste the output from `ssh-add` to the server's `authorized_keys` file: - -```console -$ ssh-add -L -ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211 -``` - -## (Optional) Save public key for identity file configuration - -By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or [to avoid being fingerprinted by untrusted ssh servers](https://words.filippo.io/ssh-whoami-filippo-io/). To do this you'll need to use the command line argument `-i [identity_file]` or the `IdentityFile` and `IdentitiesOnly` options in `.ssh/config`. - -The argument provided to `IdentityFile` is traditionally the path to the _private_ key file (for example `IdentityFile ~/.ssh/id_rsa`). For YubiKey, `IdentityFile` must point to the _public_ key file, and `ssh` will select the appropriate private key from those available via ssh-agent. To prevent `ssh` from trying all keys in the agent, use `IdentitiesOnly yes` along with one or more `-i` or `IdentityFile` options for the target host. - -To reiterate, with `IdentitiesOnly yes`, `ssh` will not enumerate public keys loaded into `ssh-agent` or `gpg-agent`. This means public-key authentication will not proceed unless explicitly named by `ssh -i [identity_file]` or in `.ssh/config` on a per-host basis. - -In the case of YubiKey usage, to extract the public key from the ssh agent: - -```console -ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub -``` - -Then explicitly associate this YubiKey-stored key for used with a host, `github.com` for example, as follows: - -```console -$ cat << EOF >> ~/.ssh/config -Host github.com - IdentitiesOnly yes - IdentityFile ~/.ssh/id_rsa_yubikey.pub -EOF -``` - -## Connect with public key authentication - -```console -$ ssh git@github.com -vvv -[...] -debug2: key: cardno:000605553211 (0x1234567890), -debug1: Authentications that can continue: publickey -debug3: start over, passed a different list publickey -debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password -debug3: authmethod_lookup publickey -debug3: remaining preferred: keyboard-interactive,password -debug3: authmethod_is_enabled publickey -debug1: Next authentication method: publickey -debug1: Offering RSA public key: cardno:000605553211 -debug3: send_pubkey_test -debug2: we sent a publickey packet, wait for reply -debug1: Server accepts key: pkalg ssh-rsa blen 535 -debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 -debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 -debug1: Authentication succeeded (publickey). -[...] -``` - -**Tip** To make multiple connections or securely transfer many files, use the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. - -## Import SSH keys - -If there are existing SSH keys to make available via `gpg-agent`, they will need to be imported. Then, remove the original private keys. When importing the key, `gpg-agent` uses the key filename as the label - this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey in place and importing `~/.ssh/id_rsa`: - -```console -$ ssh-add -l -4096 SHA256:... cardno:00060123456 (RSA) - -$ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa -``` - -When invoking `ssh-add`, a prompt for the SSH key passphrase will appear, then the `pinentry` program will prompt and confirm a new passphrase to encrypt the converted key within the GnuPG key store. - -The migrated key will be listed in `ssh-add -l`: - -```console -$ ssh-add -l -4096 SHA256:... cardno:00060123456 (RSA) -2048 SHA256:... /Users/username/.ssh/id_rsa (RSA) -``` - -To show the keys with MD5 fingerprints, as used by `gpg-connect-agent`'s `KEYINFO` and `DELETE_KEY` commands: - -```console -$ ssh-add -E md5 -l -4096 MD5:... cardno:00060123456 (RSA) -2048 MD5:... /Users/username/.ssh/id_rsa (RSA) -``` - -When using the key `pinentry` will be invoked to request the key passphrase. The passphrase will be cached for up to 10 idle minutes between uses, up to a maximum of 2 hours. - -## Remote Machines (SSH Agent Forwarding) - -**Note** SSH Agent Forwarding can [add additional risk](https://matrix.org/blog/2019/05/08/post-mortem-and-remediations-for-apr-11-security-incident/#ssh-agent-forwarding-should-be-disabled) - proceed with caution! - -There are two methods for ssh-agent forwarding, one is provided by OpenSSH and the other is provided by GnuPG. - -The latter one may be more insecure as raw socket is just forwarded (not like `S.gpg-agent.extra` with only limited functionality; if `ForwardAgent` implemented by OpenSSH is just forwarding the raw socket, then they are insecure to the same degree). But for the latter one, one convenience is that one may forward once and use this agent everywhere in the remote. So again, proceed with caution! - -For example, tmux does not have environment variables such as `$SSH_AUTH_SOCK` when connecting to remote hosts and attaching an existing session. For each shell, find the socket and `export SSH_AUTH_SOCK=/tmp/ssh-agent-xxx/xxxx.socket`. However, with `S.gpg-agent.ssh` in a fixed place, it can be used as the ssh-agent in shell rc files. - -### Use ssh-agent - -You should now be able to use `ssh -A remote` on the _local_ host to log into _remote_ host, and should then be able to use YubiKey as if it were connected to the remote host. For example, using e.g. `ssh-add -l` on that remote host will show the public key from the YubiKey (`cardno:`). Always use `ForwardAgent yes` only for a single host, never for all servers. - -### Use S.gpg-agent.ssh - -First you need to go through [Remote Machines (GPG Agent Forwarding)](#remote-machines-gpg-agent-forwarding), know the conditions for gpg-agent forwarding and know the location of `S.gpg-agent.ssh` on both the local and the remote. - -You may use the command: - -```console -$ gpgconf --list-dirs agent-ssh-socket -``` - -Edit `.ssh/config` to add the remote host: - -```console -Host - Hostname remote-host.tld - StreamLocalBindUnlink yes - RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh - # RemoteForward [remote socket] [local socket] - # Note that ForwardAgent is not wanted here! -``` - -After successfully ssh into the remote host, confirm `/run/user/1000/gnupg/S.gpg-agent.ssh` exists. - -Then in the *remote* you can type in command line or configure in the shell rc file with: - -```console -export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" -``` - -After sourcing the shell rc file, `ssh-add -l` will return the correct public key. - -**Note** In this process no gpg-agent in the remote is involved, hence `gpg-agent.conf` in the remote is of no use. Also pinentry is invoked locally. - -### Chained SSH agent forwarding - -If you use `ssh-agent` provided by OpenSSH and want to forward it into a *third* box, you can just `ssh -A third` on the *remote*. - -Meanwhile, if you use `S.gpg-agent.ssh`, assume you have gone through the steps above and have `S.gpg-agent.ssh` on the *remote*, and you would like to forward this agent into a *third* box, first you may need to configure `sshd_config` and `SSH_AUTH_SOCK` of *third* in the same way as *remote*, then in the ssh config of *remote*, add the following lines - -```console -Host third - Hostname third-host.tld - StreamLocalBindUnlink yes - RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh - # RemoteForward [remote socket] [local socket] - # Note that ForwardAgent is not wanted here! -``` - -The path must be set according to `gpgconf --list-dirs agent-ssh-socket` on *remote* and *third* hosts. - -## GitHub - -YubiKey can be used to sign commits and tags, and authenticate SSH to GitHub. - -Manage SSH and PGP keys in [Settings](https://github.com/settings/keys). - -Configure a signing key: - -```console -git config --global user.signingkey $KEYID -``` - -The `user.email` option must match the email address associated with the PGP identity. - -To sign commits or tags, use the `-S` option. +Reboot or to activate changes. **Windows** -To configure authentication: - -```console -git config --global core.sshcommand "plink -agent" - -git config --global gpg.program 'C:\Program Files (x86)\GnuPG\bin\gpg.exe' -``` - -Update the repository URL to `git@github.com:USERNAME/repository` and any authenticated commands will be authorized by YubiKey. - -**Note** For the error `gpg: signing failed: No secret key` - run `gpg --card-status` with YubiKey plugged in and try the git command again. - -## OpenBSD - -Install and enable tools for use with PC/SC drivers, cards, readers, then reboot to recognize YubiKey: - -```console -doas pkg_add pcsc-tools - -doas rcctl enable pcscd - -doas reboot -``` - -## Windows - Windows can already have some virtual smart card readers installed, like the one provided for Windows Hello. To verify YubiKey is the correct one used by scdaemon, add it to its configuration. Find the YubiKey label using PowerShell: @@ -2165,11 +1323,11 @@ Create a shortcut that points to `gpg-connect-agent /bye` and place it in the st PuTTY can now be used for public-key SSH authentication. When the server asks for public-key verification, PuTTY will forward the request to GnuPG, which will prompt for a PIN to authorize the operation. -### WSL +**WSL** The goal is to configure SSH client inside WSL work together with the Windows agent, such as gpg-agent.exe. -![WSL agent architecture](media/schema_gpg.png) +See the [WSL agent architecture](media/schema_gpg.png) illustration for an overview. **Note** GnuPG forwarding for cryptographic operations is not supported. See [vuori/weasel-pageant](https://github.com/vuori/weasel-pageant) for more information. @@ -2215,67 +1373,222 @@ Connect to the remote host and use `ssh-add -l` to confirm forwarding works. Agent forwarding may be chained through multiple hosts. Follow the same [protocol](#remote-host-configuration) to configure each host. -## macOS +### Replace agents -To use gui applications on macOS, [a little bit more setup is needed](https://jms1.net/yubikey/make-ssh-use-gpg-agent.md). +To launch `gpg-agent` for use by SSH, use the `gpg-connect-agent /bye` or `gpgconf --launch gpg-agent` commands. -Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent.plist` with the following contents: - -``` - - - - - Label - gnupg.gpg-agent - RunAtLoad - - KeepAlive - - ProgramArguments - - /usr/local/MacGPG2/bin/gpg-connect-agent - /bye - - - -``` +Add the following to the shell rc file: ```console -launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent.plist +export GPG_TTY="$(tty)" +export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" +gpg-connect-agent updatestartuptty /bye > /dev/null ``` -Create `$HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist` with the following contens: - -``` - - - - - Label - gnupg.gpg-agent-symlink - ProgramArguments - - /bin/sh - -c - /bin/ln -sf $HOME/.gnupg/S.gpg-agent.ssh $SSH_AUTH_SOCK - - RunAtLoad - - - -``` +On modern systems, `gpgconf --list-dirs agent-ssh-socket` will automatically set `SSH_AUTH_SOCK` to the correct value and is better than hard-coding to `run/user/$UID/gnupg/S.gpg-agent.ssh`, if available: ```console -launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist +export GPG_TTY="$(tty)" +export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) +gpgconf --launch gpg-agent ``` -Reboot or log out and log back in to activate these changes. +For fish, `config.fish` should look like this (consider putting them into the `is-interactive` block): -# Remote Machines (GPG Agent Forwarding) +```fish +set -x GPG_TTY (tty) +set -x SSH_AUTH_SOCK (gpgconf --list-dirs agent-ssh-socket) +gpgconf --launch gpg-agent +``` -YubiKey can be used sign git commits and decrypt files on remote hosts with GPG Agent Forwarding. To ssh through another network, especially to push to/pull from GitHub using ssh, see [Remote Machines (SSH Agent forwarding)](#remote-machines-ssh-agent-forwarding). +When using `ForwardAgent` for ssh-agent forwarding, `SSH_AUTH_SOCK` only needs to be set on the *local* host, where YubiKey is connected. On the *remote* host, `ssh` will set `SSH_AUTH_SOCK` to something like `/tmp/ssh-mXzCzYT2Np/agent.7541` upon connection. Do **not** set `SSH_AUTH_SOCK` on the remote host - doing so will break [SSH Agent Forwarding](#remote-machines-ssh-agent-forwarding). + +For `S.gpg-agent.ssh` (see [SSH Agent Forwarding](#remote-machines-ssh-agent-forwarding) for more info), `SSH_AUTH_SOCK` should also be set on the *remote*. However, `GPG_TTY` should not be set on the *remote*, explanation specified in that section. + +### Copy public key + +**Note** It is **not** necessary to import the GnuPG public key in order to use SSH only. + +Copy and paste the output from `ssh-add` to the server's `authorized_keys` file: + +```console +$ ssh-add -L +ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211 +``` + +**Optional** Save the public key for identity file configuration. By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or [to avoid being fingerprinted by untrusted ssh servers](https://words.filippo.io/ssh-whoami-filippo-io/). To do this you'll need to use the command line argument `-i [identity_file]` or the `IdentityFile` and `IdentitiesOnly` options in `.ssh/config`. + +The argument provided to `IdentityFile` is traditionally the path to the _private_ key file (for example `IdentityFile ~/.ssh/id_rsa`). For YubiKey, `IdentityFile` must point to the _public_ key file, and `ssh` will select the appropriate private key from those available via ssh-agent. To prevent `ssh` from trying all keys in the agent, use `IdentitiesOnly yes` along with one or more `-i` or `IdentityFile` options for the target host. + +To reiterate, with `IdentitiesOnly yes`, `ssh` will not enumerate public keys loaded into `ssh-agent` or `gpg-agent`. This means public-key authentication will not proceed unless explicitly named by `ssh -i [identity_file]` or in `.ssh/config` on a per-host basis. + +In the case of YubiKey usage, to extract the public key from the ssh agent: + +```console +ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub +``` + +Then explicitly associate this YubiKey-stored key for used with a host, `github.com` for example, as follows: + +```console +$ cat << EOF >> ~/.ssh/config +Host github.com + IdentitiesOnly yes + IdentityFile ~/.ssh/id_rsa_yubikey.pub +EOF +``` + +Connect with public key authentication: + +```console +$ ssh git@github.com -vvv +[...] +debug2: key: cardno:000605553211 (0x1234567890), +debug1: Authentications that can continue: publickey +debug3: start over, passed a different list publickey +debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password +debug3: authmethod_lookup publickey +debug3: remaining preferred: keyboard-interactive,password +debug3: authmethod_is_enabled publickey +debug1: Next authentication method: publickey +debug1: Offering RSA public key: cardno:000605553211 +debug3: send_pubkey_test +debug2: we sent a publickey packet, wait for reply +debug1: Server accepts key: pkalg ssh-rsa blen 535 +debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 +debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 +debug1: Authentication succeeded (publickey). +[...] +``` + +**Tip** To make multiple connections or securely transfer many files, use the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. + +### Import SSH keys + +If there are existing SSH keys to make available via `gpg-agent`, they will need to be imported. Then, remove the original private keys. When importing the key, `gpg-agent` uses the key filename as the label - this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey in place and importing `~/.ssh/id_rsa`: + +```console +$ ssh-add -l +4096 SHA256:... cardno:00060123456 (RSA) + +$ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa +``` + +When invoking `ssh-add`, a prompt for the SSH key passphrase will appear, then the `pinentry` program will prompt and confirm a new passphrase to encrypt the converted key within the GnuPG key store. + +The migrated key will be listed in `ssh-add -l`: + +```console +$ ssh-add -l +4096 SHA256:... cardno:00060123456 (RSA) +2048 SHA256:... /Users/username/.ssh/id_rsa (RSA) +``` + +To show the keys with MD5 fingerprints, as used by `gpg-connect-agent`'s `KEYINFO` and `DELETE_KEY` commands: + +```console +$ ssh-add -E md5 -l +4096 MD5:... cardno:00060123456 (RSA) +2048 MD5:... /Users/username/.ssh/id_rsa (RSA) +``` + +When using the key `pinentry` will be invoked to request the key passphrase. The passphrase will be cached for up to 10 idle minutes between uses, up to a maximum of 2 hours. + +### SSH agent forwarding + +**Warning** SSH Agent Forwarding can [add additional risk](https://matrix.org/blog/2019/05/08/post-mortem-and-remediations-for-apr-11-security-incident/#ssh-agent-forwarding-should-be-disabled) - proceed with caution! + +There are two methods for ssh-agent forwarding, one is provided by OpenSSH and the other is provided by GnuPG. + +The latter one may be more insecure as raw socket is just forwarded (not like `S.gpg-agent.extra` with only limited functionality; if `ForwardAgent` implemented by OpenSSH is just forwarding the raw socket, then they are insecure to the same degree). But for the latter one, one convenience is that one may forward once and use this agent everywhere in the remote. So again, proceed with caution! + +For example, tmux does not have environment variables such as `$SSH_AUTH_SOCK` when connecting to remote hosts and attaching an existing session. For each shell, find the socket and `export SSH_AUTH_SOCK=/tmp/ssh-agent-xxx/xxxx.socket`. However, with `S.gpg-agent.ssh` in a fixed place, it can be used as the ssh-agent in shell rc files. + +#### Use ssh-agent + +You should now be able to use `ssh -A remote` on the _local_ host to log into _remote_ host, and should then be able to use YubiKey as if it were connected to the remote host. For example, using e.g. `ssh-add -l` on that remote host will show the public key from the YubiKey (`cardno:`). Always use `ForwardAgent yes` only for a single host, never for all servers. + +#### Use S.gpg-agent.ssh + +First you need to go through [GnuPG agent forwarding)](#gnupg-agent-forwarding), know the conditions for gpg-agent forwarding and know the location of `S.gpg-agent.ssh` on both the local and the remote. + +You may use the command: + +```console +$ gpgconf --list-dirs agent-ssh-socket +``` + +Edit `.ssh/config` to add the remote host: + +```console +Host + Hostname remote-host.tld + StreamLocalBindUnlink yes + RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh + # RemoteForward [remote socket] [local socket] + # Note that ForwardAgent is not wanted here! +``` + +After successfully ssh into the remote host, confirm `/run/user/1000/gnupg/S.gpg-agent.ssh` exists. + +Then in the *remote* you can type in command line or configure in the shell rc file with: + +```console +export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" +``` + +After sourcing the shell rc file, `ssh-add -l` will return the correct public key. + +**Note** In this process no gpg-agent in the remote is involved, hence `gpg-agent.conf` in the remote is of no use. Also pinentry is invoked locally. + +#### Chained forwarding + +If you use `ssh-agent` provided by OpenSSH and want to forward it into a *third* box, you can just `ssh -A third` on the *remote*. + +Meanwhile, if you use `S.gpg-agent.ssh`, assume you have gone through the steps above and have `S.gpg-agent.ssh` on the *remote*, and you would like to forward this agent into a *third* box, first you may need to configure `sshd_config` and `SSH_AUTH_SOCK` of *third* in the same way as *remote*, then in the ssh config of *remote*, add the following lines + +```console +Host third + Hostname third-host.tld + StreamLocalBindUnlink yes + RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh + #RemoteForward [remote socket] [local socket] + #Note that ForwardAgent is not wanted here! +``` + +The path must be set according to `gpgconf --list-dirs agent-ssh-socket` on *remote* and *third* hosts. + +## GitHub + +YubiKey can be used to sign commits and tags, and authenticate SSH to GitHub when configured in [Settings](https://github.com/settings/keys). + +Configure a signing key: + +```console +git config --global user.signingkey $KEYID +``` + +**Important** The `user.email` option must match the email address associated with the PGP identity. + +To sign commits or tags, use the `-S` option. + +**Windows** + +Configure authentication: + +```console +git config --global core.sshcommand "plink -agent" + +git config --global gpg.program 'C:\Program Files (x86)\GnuPG\bin\gpg.exe' +``` + +Then update the repository URL to `git@github.com:USERNAME/repository` + +**Note** For the error `gpg: signing failed: No secret key` - run `gpg --card-status` with YubiKey plugged in and try the git command again. + +## GnuPG agent forwarding + +YubiKey can be used sign git commits and decrypt files on remote hosts with GnuPG Agent Forwarding. To ssh through another network, especially to push to/pull from GitHub using ssh, see [Remote Machines (SSH Agent forwarding)](#ssh-agent-forwarding). `gpg-agent.conf` is not needed on the remote host; after forwarding, remote GnuPG directly communicates with `S.gpg-agent` without starting `gpg-agent` on the remote host. @@ -2289,9 +1602,9 @@ Import the public key on the remote host. On the local host, copy the public key scp ~/.gnupg/pubring.kbx remote:~/.gnupg/ ``` -On modern distributions such as Fedora 30, there is no need to set `RemoteForward` in `~/.ssh/config` +On modern distributions, such as Fedora 30, there is no need to set `RemoteForward` in `~/.ssh/config` -## Steps for older distributions +### Legacy distributions On the local host, run: @@ -2316,7 +1629,7 @@ Host Hostname remote-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent.extra - # RemoteForward [remote socket] [local socket] + #RemoteForward [remote socket] [local socket] ``` It may be necessary to edit `gpg-agent.conf` on the *local* host to add the following information: @@ -2332,7 +1645,7 @@ extra-socket /run/user/1000/gnupg/S.gpg-agent.extra See [Issue #85](https://github.com/drduh/YubiKey-Guide/issues/85) for more information and troubleshooting. -## Chained GnuPG agent forwarding +### Chained GnuPG agent forwarding Assume you have gone through the steps above and have `S.gpg-agent` on the *remote*, and you would like to forward this agent into a *third* box, first you may need to configure `sshd_config` of *third* in the same way as *remote*, then in the ssh config of *remote*, add the following lines: @@ -2341,16 +1654,20 @@ Host third Hostname third-host.tld StreamLocalBindUnlink yes RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent - # RemoteForward [remote socket] [local socket] + #RemoteForward [remote socket] [local socket] ``` You should change the path according to `gpgconf --list-dirs agent-socket` on *remote* and *third*. **Note** On *local* you have `S.gpg-agent.extra` whereas on *remote* and *third*, you only have `S.gpg-agent` -# Using Multiple Keys +## Using multiple YubiKeys -To use a single identity with multiple YubiKeys - or to replace a lost card with another - issue this command to switch keys: +When a GnuPG key is added to YubiKey using `keytocard`, the key is deleted from the keyring and a **stub** is added, pointing to the YubiKey. The stub identifies the GnuPG key ID and YubiKey serial number. + +When a Subkey is added to an additional YubiKey, the stub is overwritten and will now point to the latest YubiKey. GnuPG will request a specific YubiKey by serial number, as referenced by the stub, and will not recognize another YubiKey with a different serial number. + +To scan an additional YubiKey and recreate the correct stub: ```console gpg-connect-agent "scd serialno" "learn --force" /bye @@ -2378,149 +1695,11 @@ chmod +x ~/scripts/remove-keygrips.sh See discussion in Issues [#19](https://github.com/drduh/YubiKey-Guide/issues/19) and [#112](https://github.com/drduh/YubiKey-Guide/issues/112) for more information and troubleshooting steps. -# Adding an identity - -To add an identity after creating and backing up a YubiKey, first add the identity to the Certify key, and then reset YubiKey and use `keytocard` to move the Subkeys to the card again. - -Follow the same process as generating keys: boot to a secure environment, install required software and disconnect networking. - -Connect the portable storage device with the Certify key and identify the disk label: - -```console -$ sudo dmesg | tail -mmc0: new high speed SDHC card at address a001 -mmcblk0: mmc0:a001 SS16G 14.8 GiB (ro) -mmcblk0: p1 p2 -``` - -Decrypt and mount the encrypted volume: - -```console -sudo cryptsetup luksOpen /dev/mmcblk0p1 secret - -sudo mount /dev/mapper/secret /mnt/encrypted-storage -``` - -Restore the backup to a temporary directory: - -```console -export GNUPGHOME=$(mktemp -d -t gnupg_$(date +%Y%m%d%H%M)_XXX) - -cp -avi /mnt/encrypted-storage/tmp.XXX/* $GNUPGHOME -``` - -Edit the Certify key: - -```console -gpg --expert --edit-key $KEYID -``` - -Add the identity and set ultimate trust: - -```console -gpg> adduid - -gpg> trust -Your decision? 5 - -gpg> save -``` - -Export Certify and Subkeys again: - -```console -gpg --armor --export-secret-keys $KEYID > $GNUPGHOME/certify.key - -gpg --armor --export-secret-subkeys $KEYID > $GNUPGHOME/subkeys.key -``` - -Export the public key: - -```console -gpg --armor --export $KEYID | sudo tee /mnt/public/gpg-$KEYID-$(date +%F).asc -``` - -**Note** On Windows, using an extension other than `.gpg` or attempting IO redirection to a file will result in a nonfunctional private key. - -```console -gpg -o \path\to\dir\certify.gpg --armor --export-secret-keys $KEYID - -gpg -o \path\to\dir\subkeys.gpg --armor --export-secret-subkeys $KEYID - -gpg -o \path\to\dir\pubkey.gpg --armor --export $KEYID -``` - -Copy the **new** working directory to encrypted storage, which should still be mounted: - -```console -sudo cp -avi $GNUPGHOME /mnt/encrypted-storage -``` - -Unmount and close the encrypted volume: - -```console -sudo umount /mnt/encrypted-storage - -sudo cryptsetup luksClose /dev/mapper/secret -``` - -## Updating YubiKey - -Now that keys have been updated with the new identity, they will need to be loaded to YubiKey. - -First, [Reset](#reset) the OpenPGP applet, then follow the steps to [Configure YubiKey](#configure-yubikey) again. - -Next, [Transfer Keys](#transfer-keys) and reboot or securely erase the temporary working directory. - -Finally, re-import the public key, as described in [Using Keys](#using-keys). - -Use `gpg -K` to verify the identity is listed. - -# Require touch - -**Note** This is not possible on YubiKey NEO. - -By default, YubiKey will perform cryptographic operations without requiring any action from the user after the key is unlocked once with the PIN. - -To require a touch for each key operation, install [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and recall the Admin PIN: - -Encryption: - -```console -ykman openpgp keys set-touch dec on -``` - -Signature: - -```console -ykman openpgp keys set-touch sig on -``` - -Authentication: - -```console -ykman openpgp keys set-touch aut on -``` - -**Note** Versions of YubiKey Manager before 5.1.0 use `enc` instead of `dec` for encryption. - -**Note** Older versions of YubiKey Manager use `touch` instead of `set-touch` - -To view and adjust policy options: - -``` -ykman openpgp keys set-touch -h -``` - -If the YubiKey is going to be used within an email client which opens and verifies mail, `Cached` or `Cached-Fixed` may be desirable. - -YubiKey will blink when it is waiting for a touch. On Linux, [maximbaz/yubikey-touch-detector](https://github.com/maximbaz/yubikey-touch-detector) can be used to indicate YubiKey is waiting for a touch. - -# Email +## Email YubiKey can be used to decrypt and sign emails and attachments using [Thunderbird](https://www.thunderbird.net/), [Enigmail](https://www.enigmail.net) and [Mutt](http://www.mutt.org/). Thunderbird supports OAuth 2 authentication and can be used with Gmail. See [this EFF guide](https://ssd.eff.org/en/module/how-use-pgp-linux) for more information. Mutt has OAuth 2 support since version 2.0. -## Mailvelope +### Mailvelope [Mailvelope](https://www.mailvelope.com/en) allows YubiKey to be used with Gmail and others. @@ -2554,7 +1733,7 @@ sudo launchctl config user path /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin Finally, install the [Mailvelope extension](https://chromewebstore.google.com/detail/mailvelope/kajibbejlbohfaggdiogboambcijhkke) from the Chrome web store. -## Mutt +### Mutt Mutt has both CLI and TUI interfaces - the latter provides powerful functions for processing email. In addition, PGP can be integrated such that cryptographic operations can be done without leaving TUI. @@ -2566,7 +1745,181 @@ Edit the file to enable options `pgp_default_key`, `pgp_sign_as` and `pgp_autosi **Important** `pinentry-tty` set as the pinentry program in `gpg-agent.conf` is reported to cause problems with Mutt TUI, because it uses curses. It is recommended to use `pinentry-curses` or other graphic pinentry program instead. -# Reset +## Keyserver + +Public keys can be uploaded to a public server for discoverability: + +```console +gpg --send-key $KEYID + +gpg --keyserver keys.gnupg.net --send-key $KEYID + +gpg --keyserver hkps://keyserver.ubuntu.com:443 --send-key $KEYID +``` + +Or if [uploading to keys.openpgp.org](https://keys.openpgp.org/about/usage): + +```console +gpg --send-key $KEYID | curl -T - https://keys.openpgp.org +``` + +The public key URL can also be added to YubiKey (based on [Shaw 2003](https://datatracker.ietf.org/doc/html/draft-shaw-openpgp-hkp-00)): + +```console +URL="hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=${KEYID}" +``` + +Edit YubiKey with `gpg --edit-card` and the Admin PIN: + +```console +gpg/card> admin + +gpg/card> url +URL to retrieve public key: hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=0xFF00000000000000 + +gpg/card> quit +``` + +# Updating keys + +PGP does not provide [forward secrecy](https://en.wikipedia.org/wiki/Forward_secrecy), meaning a compromised key may be used to decrypt all past messages. Although keys stored on YubiKey are more difficult to exploit, it is not impossible: the key and PIN could be physically compromised, or a vulnerability may be discovered in firmware or in the random number generator used to create keys, for example. Therefore, it is recommended practice to rotate Subkeys periodically. + +When a Subkey expires, it can either be renewed or replaced. Both actions require access to the Certify key. + +- Renewing Subkeys by updating expiration indicates continued possession of the Certify key and is more convenient. + +- Replacing Subkeys is less convenient but potentially more secure: the new Subkeys will **not** be able to decrypt previous messages, authenticate with SSH, etc. Contacts will need to receive the updated public key and any encrypted secrets need to be decrypted and re-encrypted to new Subkeys to be usable. This process is functionally equivalent to losing the YubiKey and provisioning a new one. + +Neither rotation method is superior and it is up to personal philosophy on identity management and individual threat modeling to decide which one to use, or whether to expire Subkeys at all. Ideally, Subkeys would be ephemeral: used only once for each unique encryption, signature and authentication event, however in practice that is not really practical nor worthwhile with YubiKey. Advanced users may dedicate an air-gapped machine for frequent credential rotation. + +To renew or rotate Subkeys, follow the same process as generating keys: boot to a secure environment, install required software and disconnect networking. + +Connect the portable storage device with the Certify key and identify the disk label. + +Decrypt and mount the encrypted volume: + +```console +sudo cryptsetup luksOpen /dev/sdc1 gnupg-secrets + +sudo mkdir /mnt/encrypted-storage + +sudo mount /dev/mapper/gnupg-secrets /mnt/encrypted-storage +``` + +Mount the non-encrypted public partition: + +```console +sudo mkdir /mnt/public + +sudo mount /dev/sdc2 /mnt/public +``` + +Copy the original private key materials to a temporary working directory: + +```console +GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX) + +cd $GNUPGHOME + +cp -avi /mnt/encrypted-storage/gnupg-*/* $GNUPGHOME +``` + +Confirm the identity is available, set it and the key fingerprint: + +```console +gpg -K + +KEYID=$(gpg -K | grep -Po "(0x\w+)" | head -1) + +KEYFPR=$(gpg --fingerprint "$KEYID" | grep -Eo '([0-9A-F][0-9A-F ]{49})' | head -n 1 | tr -d ' ') +``` + +Recall the identity passphrase and set it, for example: + +```console +PASS=ABCD-0123-IJKL-4567-QRST-UVWX +``` + +## Renew Subkeys + +Determine the updated expiration, for example: + +```console +EXPIRATION=2026-09-01 + +EXPIRATION=2y +``` + +Renew the Subkeys: + +```console +gpg --batch --pinentry-mode=loopback \ + --passphrase "$PASS" --quick-set-expire "$KEYFPR" "$EXPIRATION" "*" +``` + +Export the updated public key: + +```console +gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc +``` + +Transfer the public key to the destination host and import it: + +```console +gpg --import 0x*.asc +``` + +Alternatively, publish to a public key server and download it: + +```console +gpg --send-key $KEYID + +gpg --recv $KEYID +``` + +The validity of the GnuPG identity will be extended, allowing it to be used again for encryption and signature operations. + +The SSH public key does **not** need to be updated on remote hosts. + +## Rotate Subkeys + +Follow the original procedure to [Create Subkeys](#create-subkeys). + +Previous Subkeys can be deleted from the identity. + +Finish by transfering new Subkeys to YubiKey. + +Copy the **new** temporary working directory to encrypted storage, which is still mounted: + +```console +sudo cp -avi $GNUPGHOME /mnt/encrypted-storage +``` + +Unmount and close the encrypted volume: + +```console +sudo umount /mnt/encrypted-storage + +sudo cryptsetup luksClose gnupg-secrets +``` + +Export the updated public key: + +```console +sudo mkdir /mnt/public + +sudo mount /dev/sdc2 /mnt/public + +gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc + +sudo umount /mnt/public +``` + +Disconnect the storage device and follow the original steps to transfer new Subkeys (`4`, `5` and `6`) to YubiKey, replacing existing ones. + +Reboot or securely erase the GnuPG temporary working directory. + +# Reset YubiKey If PIN attempts are exceeded, the YubiKey is locked and must be [Reset](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html) and set up again using the encrypted backup. @@ -2586,6 +1939,7 @@ scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 scd apdu 00 e6 00 00 scd apdu 00 44 00 00 /echo Card has been successfully reset. +/bye ``` Or use `ykman` (sometimes in `~/.local/bin/`): @@ -2600,21 +1954,17 @@ Reset code: NOT SET Admin PIN: 12345678 ``` -## Recovery after reset - -To reset YubiKey from the Certify key backup (such as the one on encrypted portable storage described in [Backup](#backup)), follow [Rotating keys](#rotating-keys) to setup the environment, then [Configure YubiKey](#configure-yubikey). - # Notes 1. YubiKey has two configurations, invoked with either a short or long press. By default, the short-press mode is configured for HID OTP; a brief touch will emit an OTP string starting with `cccccccc`. OTP mode can be swapped to the second configuration via the YubiKey Personalization tool or disabled entirely using [YubiKey Manager](https://developers.yubico.com/yubikey-manager): `ykman config usb -d OTP` 1. Using YubiKey for GnuPG keys does not prevent use of other features, such as [WebAuthn](https://en.wikipedia.org/wiki/WebAuthn), [OTP](https://www.yubico.com/resources/glossary/otp/) and [static password](https://support.yubico.com/hc/en-us/articles/360016614980-Understanding-Core-Static-Password-Features). -1. Setting a key expiry forces identity and credential lifecycle management. However, setting an expiry on the primary Certify key is useless, because it can be used to simply extend itself. [Revocation certificates](https://security.stackexchange.com/questions/14718/does-openpgp-key-expiration-add-to-security/79386#79386) should be used instead. +1. Add additional identities to a Certify key with the `adduid` command during setup, then trust it ultimately with `trust` and `5` to configure for use. -1. To switch between multiple identities on different YubiKeys, unplug the first YubiKey and restart gpg-agent, ssh-agent and pinentry with `pkill gpg-agent ; pkill ssh-agent ; pkill pinentry ; eval $(gpg-agent --daemon --enable-ssh-support)` then insert the other YubiKey and run `gpg-connect-agent updatestartuptty /bye` +1. To switch between YubiKeys, unplug the first YubiKey and restart gpg-agent, ssh-agent and pinentry with `pkill "gpg-agent|ssh-agent|pinentry" ; eval $(gpg-agent --daemon --enable-ssh-support)` then insert the other YubiKey and run `gpg-connect-agent updatestartuptty /bye` -1. To use YubiKey on multiple computers, import the corresponding public keys. Confirm see YubiKey is visible with `gpg --card-status`, then trust the imported public keys ultimately. `gpg --list-secret-keys` will show the correct and trusted key. +1. To use YubiKey on multiple computers, import the corresponding public keys, then confirm YubiKey is visible with `gpg --card-status`. Trust the imported public keys ultimately with `trust` and `5`, then `gpg --list-secret-keys` will show the correct and trusted key. # Troubleshooting @@ -2628,7 +1978,7 @@ To reset YubiKey from the Certify key backup (such as the one on encrypted porta - If you receive the error, `Yubikey core error: no yubikey present` - make sure the YubiKey is inserted correctly. It should blink once when plugged in. -- If you still receive the error, `Yubikey core error: no yubikey present` - you likely need to install newer versions of yubikey-personalize as outlined in [Required software](#required-software). +- If you still receive the error, `Yubikey core error: no yubikey present` - you likely need to install newer versions of yubikey-personalize as outlined in [Install software](#install-software). - If you receive the error, `Yubikey core error: write error` - YubiKey is likely locked. Install and run yubikey-personalization-gui to unlock it. @@ -2667,12 +2017,11 @@ gpg: [stdin]: encryption failed: Unusable public key - If you receive the error, `gpg: 0x0000000000000000: skipped: Unusable public key`, `signing failed: Unusable secret key`, or `encryption failed: Unusable public key` the Subkey may be expired and can no longer be used to encrypt nor sign messages. It can still be used to decrypt and authenticate, however. -- If the GnuPG public key is lost, follow [this guide](https://www.nicksherlock.com/2021/08/recovering-lost-gpg-public-keys-from-your-yubikey/) to recover it from YubiKey. - -- Refer to Yubico article [Troubleshooting Issues with GPG](https://support.yubico.com/hc/en-us/articles/360013714479-Troubleshooting-Issues-with-GPG) for additional guidance. +- If the _pinentry_ graphical dialog does not show and this error appears: `sign_and_send_pubkey: signing failed: agent refused operation`, install the `dbus-user-session` package and restart for the `dbus` user session to be fully inherited. This is because `pinentry` complains about `No $DBUS_SESSION_BUS_ADDRESS found`, falls back to `curses` but doesn't find the expected `tty` - If, when you try the above `--card-status` command, you get receive the error, `gpg: selecting card failed: No such device` or `gpg: OpenPGP card not available: No such device`, it's possible that the latest release of pcscd is now requires polkit rules to operate properly. Create the following file to allow users in the `wheel` group to use the card. Be sure to restart pcscd when you're done to allow the new rules to take effect. -``` + +```console cat << EOF > /etc/polkit-1/rules.d/99-pcscd.rules polkit.addRule(function(action, subject) { if (action.id == "org.debian.pcsc-lite.access_card" && @@ -2689,46 +2038,19 @@ polkit.addRule(function(action, subject) { EOF ``` -# Alternatives +- If the public key is lost, follow [this guide](https://www.nicksherlock.com/2021/08/recovering-lost-gpg-public-keys-from-your-yubikey/) to recover it from YubiKey. +- Refer to Yubico article [Troubleshooting Issues with GPG](https://support.yubico.com/hc/en-us/articles/360013714479-Troubleshooting-Issues-with-GPG) for additional guidance. + +# Alternative solutions + +* [`vorburger/ed25519-sk.md`](https://github.com/vorburger/vorburger.ch-Notes/blob/develop/security/ed25519-sk.md) - use YubiKey for SSH without GnuPG * [`smlx/piv-agent`](https://github.com/smlx/piv-agent) - SSH and GnuPG agent which can be used with PIV devices * [`keytotpm`](https://www.gnupg.org/documentation/manuals/gnupg/OpenPGP-Key-Management.html) - use GnuPG with TPM systems -## Create keys with batch - -Keys can also be generated using template files and the `batch` parameter - see [GnuPG documentation](https://www.gnupg.org/documentation/manuals/gnupg/Unattended-GPG-key-generation.html). - -Use the example [gen-params-rsa4096](contrib/gen-params-rsa4096) or [gen-params-ed25519](contrib/gen-params-ed25519) template (the latter requires GnuPG v2.1.7). - -Generate the Certify key: - -```console -gpg --batch --generate-key gen-params-rsa4096 -``` - -Verify the Certify key: - -```console -gpg --list-key -``` - -Export the Certify key ID, extract its fingerprint and create the Subkeys: - -```console -export KEYID=0xF0F2CFEB04341FB5 -KEYFPR=$(gpg --fingerprint "$KEYID" | grep -Eo '([0-9A-F][0-9A-F ]{49})' | head -n 1 | tr -d ' ') - -gpg --quick-add-key "$KEYFPR" rsa4096 sign 2y - -gpg --quick-add-key "$KEYFPR" rsa4096 encrypt 2y - -gpg --quick-add-key "$KEYFPR" rsa4096 auth 2y -``` - # Additional resources * [Yubico - PGP](https://developers.yubico.com/PGP/) -* [Yubico - PGP Card edit](https://developers.yubico.com/PGP/Card_edit.html) * [Yubico - Yubikey Personalization](https://developers.yubico.com/yubikey-personalization/) * [A Visual Explanation of GPG Subkeys (2022)](https://rgoulter.com/blog/posts/programming/2022-06-10-a-visual-explanation-of-gpg-subkeys.html) * [dhess/nixos-yubikey](https://github.com/dhess/nixos-yubikey) @@ -2740,5 +2062,3 @@ gpg --quick-add-key "$KEYFPR" rsa4096 auth 2y * [PGP and SSH keys on a Yubikey NEO (2015)](https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/) * [Offline GnuPG Master Key and Subkeys on YubiKey NEO Smartcard (2014)](https://blog.josefsson.org/2014/06/23/offline-gnupg-master-key-and-subkeys-on-yubikey-neo-smartcard/) * [Creating the perfect GPG keypair (2013)](https://alexcabal.com/creating-the-perfect-gpg-keypair/) -* [GPG and SSH with Yubikey NEO (2013)](https://blog.habets.se/2013/02/GPG-and-SSH-with-Yubikey-NEO) -* [Riseup - OpenPGP Best Practices](https://help.riseup.net/en/security/message-security/openpgp/best-practices) diff --git a/contrib/gen-params-ed25519 b/contrib/gen-params-ed25519 deleted file mode 100644 index 83d3ac7..0000000 --- a/contrib/gen-params-ed25519 +++ /dev/null @@ -1,32 +0,0 @@ -# Requires GnuPG v2.1.7 or newer - -%echo Generating a OpenPGP key - -# uncomment the following line to remove asking for a passphrase -#%no-protection - -Key-Type: eddsa -Key-Curve: Ed25519 -# Key generated is a master key ("certificate") -Key-Usage: cert - -# Parameters to generate a subkey -# Subkey-Type: ecdh -# Subkey-Curve: Curve25519 - -# Choose one of following options -# Subkey-Usage: sign -# Subkey-Usage: auth -# Subkey-Usage: encrypt - -# select a name and email address - neither has to be valid nor existing -Name-Real: YubiKey User -Name-Email: yubikey@example - -# Do not set the key to expire -Expire-Date: 0 - -# Do a commit here, so that we can later print "done" :-) -%commit - -%echo done diff --git a/contrib/gen-params-rsa4096 b/contrib/gen-params-rsa4096 deleted file mode 100644 index 1bc8c1a..0000000 --- a/contrib/gen-params-rsa4096 +++ /dev/null @@ -1,29 +0,0 @@ -%echo Generating a OpenPGP key - -# uncomment the following line to remove asking for a passphrase -#%no-protection - -Key-Type: RSA -Key-Length: 4096 -# Key generated is a master key ("certificate") -Key-Usage: cert - -# Parameters to generate a subkey -# Subkey-Type: ELG-E -# Subkey-Length: 4096 -# Choose one of following options -# Subkey-Usage: encrypt -# Subkey-Usage: sign -# Subkey-Usage: auth - -# select a name and email address - neither has to be valid nor existing -Name-Real: YubiKey User -Name-Email: yubikey@example - -# Do not set the key to expire -Expire-Date: 0 - -# Do a commit here, so that we can later print "done" :-) -%commit - -%echo done diff --git a/flake.nix b/flake.nix index 183958f..789b70f 100644 --- a/flake.nix +++ b/flake.nix @@ -40,7 +40,7 @@ name = "yubikey-guide"; icon = "${pkgs.yubikey-manager-qt}/share/ykman-gui/icons/ykman.png"; desktopName = "drduh's YubiKey Guide"; - genericName = "Guide to using YubiKey for GPG and SSH"; + genericName = "Guide to using YubiKey for GnuPG and SSH"; comment = "Open the guide in a reader program"; categories = ["Documentation"]; exec = "${viewYubikeyGuide}/bin/view-yubikey-guide"; @@ -167,7 +167,7 @@ }; # Unset history so it's never stored Set GNUPGHOME to an - # ephemeral location and configure GPG with the guide's + # ephemeral location and configure GPG with the guide environment.interactiveShellInit = '' unset HISTFILE diff --git a/passphrase.html b/passphrase.html new file mode 100644 index 0000000..a6c2326 --- /dev/null +++ b/passphrase.html @@ -0,0 +1,1185 @@ + + + + + passphrase + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
-ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
+ + diff --git a/reset-yubikey b/reset-yubikey new file mode 100644 index 0000000..a7f38c1 --- /dev/null +++ b/reset-yubikey @@ -0,0 +1,14 @@ +/hex +scd serialno +scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 +scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 +scd apdu 00 e6 00 00 +scd apdu 00 44 00 00 +/echo Card has been successfully reset. +/bye