lsyncd/manpage.lsyncd.xml

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [

<!--

`xsltproc -''-nonet \
          -''-param man.charmap.use.subset "0" \
          -''-param make.year.ranges "1" \
          -''-param make.single.year.ranges "1" \
          /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
          manpage.xml'

A manual page <package>.<section> will be generated. You may view the
manual page with: nroff -man <package>.<section> | less'. A typical entry
in a Makefile or Makefile.am is:

DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/nwalsh/manpages/docbook.xsl
XP     = xsltproc -''-nonet -''-param man.charmap.use.subset "0"

manpage.1: manpage.xml
        $(XP) $(DB2MAN) $<

The xsltproc binary is found in the xsltproc package. The XSL files are in
docbook-xsl. A description of the parameters you can use can be found in the
docbook-xsl-doc-* packages. Please remember that if you create the nroff
version in one of the debian/rules file targets (such as build), you will need
to include xsltproc and docbook-xsl in your Build-Depends control field.
Alternatively use the xmlto command/package. That will also automatically
pull in xsltproc and docbook-xsl.

Notes for using docbook2x: docbook2x-man does not automatically create the
AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as
<refsect1> ... </refsect1>.

To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections
read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be
found in the docbook-xsl-doc-html package.

Validation can be done using: `xmllint -''-noout -''-valid manpage.xml`

General documentation about man-pages and man-page-formatting:
man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/

-->
  <!ENTITY dhpackage   "lsyncd">
]>

<refentry>
  <refentryinfo>
    <title>lsyncd User Manual</title>
    <productname>lsyncd</productname>
    <authorgroup>
      <author>
       <firstname>Junichi</firstname>
        <surname>Uekawa</surname>
        <contrib>Wrote this manpage for the Debian system.</contrib>
        <address>
          <email>dancer@debian.org</email>
        </address>
      </author>
      <author>
       <firstname>Axel</firstname>
        <surname>Kittenberger</surname>
        <contrib>Strives to keep this uptodate.</contrib>
        <address>
          <email>axel.kittenberger@univie.ac.at</email>
        </address>
      </author>
    </authorgroup>
    <copyright>
      <year>2008</year>
      <holder>Junichi Uekawa, Axel Kittenberger</holder>
    </copyright>
    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
        document under the terms of the GNU General Public License,
        Version 2 or (at your option) any later version published by
        the Free Software Foundation.</para>
    </legalnotice>
  </refentryinfo>
  <refmeta>
    <refentrytitle>LSYNCD</refentrytitle>
    <manvolnum>1</manvolnum>
  </refmeta>
  <refnamediv>
    <refname>&dhpackage;</refname>
    <refpurpose>A rsync-based tool to monitor a directory including subdirectories and update modifications.</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <cmdsynopsis>
      <command>&dhpackage;</command>
      <!-- These are several examples, how syntaxes could look -->
      <arg choice="opt"><option>--conf <parameter>FILE</parameter></option></arg>
      <arg choice="opt"><option>--debug</option></arg>
      <arg choice="opt"><option>--dryrun</option></arg>
      <arg choice="opt"><option>--exclude-file <parameter>FILE</parameter></option></arg>
      <arg choice="opt"><option>--logfile <parameter>FILE</parameter></option></arg>
      <arg choice="opt"><option>--no-daemon</option></arg>
      <arg choice="opt"><option>--binary <parameter>FILE</parameter></option></arg>
      <arg choice="opt"><option>--pidfile <parameter>FILE</parameter></option></arg>
      <arg choice="opt"><option>--scarce</option></arg>
      <arg choice="opt"><replaceable>source</replaceable></arg>
      <arg choice="opt"><replaceable>target</replaceable></arg>
    </cmdsynopsis>
    <cmdsynopsis>
      <command>&dhpackage;</command>
      <!-- Normally the help and version options make the programs stop
           right after outputting the requested information. -->
      <group choice="opt">
        <arg choice="plain">
          <group choice="req">
            <arg choice="plain"><option>--help</option></arg>
          </group>
        </arg>
        <arg choice="plain">
          <group choice="req">
            <arg choice="plain"><option>--version</option></arg>
          </group>
        </arg>
      </group>
    </cmdsynopsis>
  </refsynopsisdiv>
  <refsect1 id="description">
    <title>DESCRIPTION</title>
    <para><command>&dhpackage;</command> is a program that uses rsync
      to synchronize local directories with a remote machine running
      rsyncd.  Lsyncd watches multiple directory trees through
      inotify.  On startup it will rsync all directories with the remote
      host(s), and then sync single directories by collecting the inotify
      events.  This tool is a light-weight live mirror solution.
    </para>
  </refsect1>
  <refsect1 id="options">
    <title>OPTIONS</title>
    <para>The program takes options starting with two dashes (`-').  A summary of
      options is included below.</para>
    <variablelist>
      <!-- Use the variablelist.term.separator and the
           variablelist.term.break.after parameters to
           control the term elements. -->
      <varlistentry>
        <term><option>--conf <parameter>FILE</parameter></option></term>
        <listitem>
          <para>config file to read config from. See <citerefentry> <refentrytitle>lsyncd.conf.xml</refentrytitle><manvolnum>5</manvolnum></citerefentry></para>
		  <para>Default: <filename>/etc/lsyncd.conf.xml</filename> if no <option>source</option>, <option>target</option> is given in the commandline. If they are given and <arg>--conf</arg> is not given no config file will be loaded.
		  </para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--debug</option></term>
        <listitem>
          <para>Log debug messages</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--dryrun</option></term>
        <listitem>
          <para>Do not call rsync, run dry only</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--exclude-file <parameter>FILE</parameter></option></term>
        <listitem>
          <para>Exclude file handlet to rsync (DEFAULT: None).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--logfile <parameter>FILE</parameter></option></term>
        <listitem>
          <para>Put log here (DEFAULT: /var/log/lsyncd).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--no-daemon</option></term>
        <listitem>
          <para>Do not detach, log to stdout/stderr.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--rsync-binary <parameter>FILE</parameter></option></term>
        <listitem>
          <para>Call this binary to sync (DEFAULT: /usr/bin/rsync).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--pidfile <parameter>FILE</parameter></option></term>
        <listitem>
          <para>Create a file with pid of application.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--scarce</option></term>
        <listitem>
          <para>Only log errors.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--help</option></term>
        <listitem>
          <para>Show summary of options.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><option>--version</option></term>
        <listitem>
          <para>Show version of program.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>
  <refsect1 id="files">
    <title>FILES</title>
    <variablelist>
      <varlistentry>
        <term><filename>/etc/lsyncd.conf.xml</filename></term>
        <listitem>
          <para>The default location of configuration file.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term><filename>/var/log/lsyncd</filename></term>
        <listitem>
          <para>The default location of log file.  Make sure the
	    running user has write access to this file, or specify a
	    different log file name.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>
  <refsect1 id="diagnostics">
    <title>DIAGNOSTICS</title>
	<!-- There are actually now a lot of errors that can be present at 
	     stderr if something is wrong in the config file. Leave this 
		 section for now. -->
    <!--para>The following diagnostics may be issued
      on <filename class="devicefile">stderr</filename>:</para>
    <variablelist>
      <varlistentry>
        <term><errortext>Out of memory!</errortext></term>
        <listitem>
          <para>It might get out of memory.
          </para>
        </listitem>
      </varlistentry>
    </variablelist-->
    <para><command>&dhpackage;</command> provides some return codes, that can
      be used in scripts:</para>
    <segmentedlist>
      <segtitle>Code</segtitle>
      <segtitle>Diagnostic</segtitle>
      <seglistitem>
        <seg><errorcode>0</errorcode></seg>
        <seg>Program exited successfully.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>1</errorcode></seg>
        <seg>Out of memory.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>2</errorcode></seg>
        <seg>File was not found, or failed to write.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>3</errorcode></seg>
        <seg>binary (most likely rsync) returned non-zero result on startup.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>4</errorcode></seg>
        <seg>Something wrong the command-line arguments in the lsyncd invocation.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>5</errorcode></seg>
        <seg>Too many exclude files were specified.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>6</errorcode></seg>
        <seg>Something wrong with the config file.</seg>
      </seglistitem>

      <seglistitem>
        <seg><errorcode>255</errorcode></seg>
        <seg>Internal failure.</seg>
      </seglistitem>
    </segmentedlist>
  </refsect1>
  <!--refsect1 id="bugs">
    <!- Or use this section to tell about upstream BTS. ->
    <title>BUGS</title>
    <para>TBD.</para>
  </refsect1-->
  <refsect1 id="see_also">
    <title>SEE ALSO</title>
    <!-- In alpabetical order. -->
    <para>
	  <citerefentry>
        <refentrytitle>lsyncd.conf.xml</refentrytitle>
        <manvolnum>5</manvolnum>
      </citerefentry>
	  <citerefentry>
        <refentrytitle>rsync</refentrytitle>
        <manvolnum>1</manvolnum>
      </citerefentry>
	 </para>
    <para>The programs are documented fully in README file available
      in <filename>/usr/share/doc/lsyncd/README.gz</filename>.</para>
  </refsect1>
</refentry>