--- layout: default title: "Config Layer 4: Default Config" short: "Config Layer 4" --- You can simply choose from a set of three default implementations which are: __rsync__, __rsyncssh__ and __direct__. To sync a local directory using the default rsync behavior, just add this to a config file: {% highlight lua %} sync { default.rsync, source = "DIRNAME", target = "DIRNAME" } {% endhighlight %} The order of the arguments is of no importance. If target is a local directory, take care that it is an absolute pathname. You can add multiple syncs that way. The source directories may be identical or differ without problems. ```source``` is an universal parameter that must be given for every sync. All other ```sync``` parameters can differ depending on the behavior selected. Optionally you can override the default or settings values ```maxDelays``` or ```maxProcesses``` per _Sync_. One can also skip the initial rsync process by setting the default ```init``` function to false: {% highlight lua %} sync { default.rsync, source = "DIRNAME", target = "DIRNAME", init = false } {% endhighlight %} This is an optimization which can be dangerous; so, please use it only if you are sure that source and target are synchronized when Lsyncd is started. The default behaviors you can select from are following: Shared Settings --------------- Following settings are shared between all defaults: | Name | Description | |-----------------|------------------| | source | Source directory | | crontab | See section `Periodic Full-Sync`| default.rsync ------------- The default rsync configuration will aggregate events up to ```delay``` seconds or 1000 separate uncollapsible events, which ever happens first. Then it will spawn one Rsync with a filter of all files that changed. The filter list is transmitted to Rsync trough a pipe. A call from Lsyncd to Rsync will thus look like this: {% highlight shell %} /usr/bin/rsync -ltsd --delete --include-from=- --exclude=* SOURCE TARGET {% endhighlight %} You can change the options Rsync is called and the Rsync binary that is call with the ```rsync``` parameter. Example: {% highlight lua %} sync { default.rsync, source = "/home/user/src/", target = "foohost.com:~/trg/", delay = 15, rsync = { binary = "/usr/local/bin/rsync", archive = true, compress = true } } {% endhighlight %} Additional settings: | Name | Description | |-----------------|-------------| | batchSizeLimit | Files larger then this limit should not be batched into on transfer. Only makes sense with processes > 1 which prevents rsyncssh | Below is a table of options for the ```rsync``` parameter. Please have a look at the Rsync documentation for an in depth explanation.
parameter = TYPE default value comment
acls = BOOL false
append = BOOL false (Lsyncd >= 2.2.0)
append-verify = BOOL false (Lsyncd >= 2.2.0)
archive = BOOL false
backup = BOOL false (Lsyncd >= 2.2.0)
backup_dir = DIR false (Lsyncd >= 2.2.0)
binary = FILENAME "/usr/bin/rsync" Lsyncd calls this binary as rsync
checksum = BOOL false
chmod = STRING (Lsyncd >= 2.2.0)
chown = USER:GROUP (Lsyncd >= 2.2.0)
compress = BOOL false
copy_dirlinks = BOOL false (Lsyncd >= 2.2.0)
copy_links = BOOL false
cvs_exclude = BOOL
dry_run = BOOL false
exclude = PATTERN TABLE of PATTERNs also allowed
excludeFrom = FILENAME
executability = BOOL false
existing = BOOL false (Lsyncd >= 2.2.0)
group = BOOL false
groupmap = STRING (Lsyncd >= 2.2.0)
hard_links = BOOL false
ignore_times = BOOL false
inplace = BOOL false (Lsyncd >= 2.1.6)
ipv4 = BOOL false
ipv6 = BOOL false
links = BOOL true
one_file_system = BOOL false
owner = BOOL false
password_file = FILENAME (Lsyncd >= 2.1.2)
perms = BOOL false
protect_args = BOOL true
prune_empty_dirs = BOOL false
quiet = BOOL false
rsh = COMMAND
rsync_path = PATH (path to rsync on remote host)
sparse = BOOL false
suffix = SUFFIX (Lsyncd >= 2.2.0)
temp_dir = DIR
times = BOOL true
update = BOOL false
usermap = STRING (Lsyncd >= 2.2.0)
verbose = BOOL false
whole_file = BOOL false
xattrs = BOOL false
_extra = TABLE of STRINGS. If absolutely needed, additional arguments can be specified as a TABLE of STRINGS(example: { "--omit-dir-times", "--omit-link-times" }). Note that the underscore highlights this as workaround. If you need something that is not covered by the above options, please request it via a feature request on the project website. Most notably, do not add -r for recursive or -a which implies recursive, since Lsyncd will handle that by itself. Additionally do not add -R for relative, which will ruin Lsyncd <-> Rsync communication.
default.rsyncssh ---------------- This configuration differs from the standard rsync configuration in that it uses ssh commands to move files or directories locally at the target host instead of deleting and transferring again. This configuration does spawn Rsync processes like default.rsync but additionally will spawn ```/usr/bin/ssh HOST mv ORIGIN DESTINATION``` commands. Different to default.rsync it does not take an uniform ```target``` parameter, but needs ```host``` and ```targetdir``` separated. Rsync's options can be changed with the ```rsync``` parameter like in default.rsync described above. Additional to that ssh can be configured via the ```ssh``` parameter.
binary = FILENAME Lsyncd calls this binary as ssh (default: /usr/bin/ssh)
identityFile = FILE Uses this file to identify for public key authentication.
options = TABLE A table of addition extended options to pass to ssh's -o option.
port = PORT Adds --port=PORT to the ssh call.
_extra = STRING TABLE Similar to rsync._extra this can be used as quick workaround if absolutely needed.
Example: {% highlight lua %} settings { logfile = "/var/log/lsyncd.log", statusFile = "/var/log/lsyncd-status.log", statusInterval = 20 } sync { default.rsyncssh, source="/srcdir", host="remotehost", excludeFrom="/etc/lsyncd.exclude", targetdir="/dstdir", rsync = { archive = true, compress = false, whole_file = false }, ssh = { port = 1234 } } {% endhighlight %} Please note the comma between the ```rsync``` parameter set and the ```ssh``` parameter set. __Caution__ If you are upgrading from 2.0.x, please notice that `settings` became a function from a variable, so you __MUST__ delete the equal sign '=' between `settings` and the `{`. Lsyncd will call ```xargs``` on the remote host to handle multiple tasks in a single connection. Xargs options can be specified by the xargs parameter.
binary = FILENAME Lsyncd calls this binary as xargs on the remote host (default: /usr/bin/xargs)
delimiter = DELIMITER delimiting character to separate filenames. By default the 0 character is used. Very old holds may need newline instead.
_extra = STRING TABLE By default { '-0', 'rm -rf' }. Remove the -0 if you chose newline delimiter instead. Otherwise leave it as is.
Example: {% highlight lua %} sync { default.rsyncssh, source = "/home/user/src/", host = "foohost.com", targetdir = "~/trg/", } {% endhighlight %} default.direct ------------- Default.direct can be used to keep two local directories in sync with better performance than using default.rsync. Default.direct uses (just like default.rsync) rsync on startup to initially synchronize the target directory with the source directory. However, during normal operation default.direct uses /bin/cp, /bin/rm and /bin/mv to keep the synchronization. All parameters are just like default.rsync. Example: {% highlight lua %} sync { default.direct, source = "/home/user/src/", target = "/home/user/trg/" } {% endhighlight %} Exclusions ---------- Two additional parameters can be specified to sync{}:
excludeFrom = FILENAME loads exclusion rules from this file, on rule per line
exclude = LIST loads exclusion rules from this list of strings
Exclusion rules are modeled after rsync's exclusion patterns but are a bit simpler. Lsyncd supports these features: * Generally if any segment of the pathname (see below Layer 3) of an event matches the text, it is excluded. E.g. the file "/bin/foo/bar" matches the rule "foo". * If the rule starts with a slash, it will only be matched at the beginning of the pathname * If the rule ends with a slash, it will only be matched at the end of a pathname * ? matches any character that is not a slash. * ```*``` matches zero or more characters that are not a slash * ```**``` matches zero or more characters, this can be slashes. Example: {% highlight lua %} sync { default.rsync, source = "/home/user/src/", targetdir = "/home/user/dst/", exclude = { '_.bak' , '_.tmp' } } {% endhighlight %} Deletions --------- By default Lsyncd will delete files on the target that are not present at the source since this is a fundamental part of the idea of keeping the target in sync with the source. However, many users requested exceptions for this, for various reasons, so all default implementations take ```delete``` as an additional parameter. Valid values for ```delete``` are:
delete = true Default. Lsyncd will delete on the target whatever is not in the source. At startup and what's being deleted during normal operation.
delete = false Lsyncd will not delete any files on the target. Not on startup nor on normal operation. (Overwrites are possible though)
delete = 'startup' Lsyncd will delete files on the target when it starts up but not on normal operation.
delete = 'running' Lsyncd will not delete files on the target when it starts up but will delete those that are removed during normal operation.
Tunnels ------- *New in: 2.3.0* Lsyncd is able to start and manage external programs to provide a tunnel for data transfer. Additionally it can spawn multiple connections and load-balance connections among them. A tunnel is created through the `tunnel` function. ``` {% highlight lua %} sync { default.rsync, tunnel = tunnel { command = {"ssh", "-N", "-L", "localhost:5432:localhost:873", "tunnel@testmachine"}, } target = "rsync://localhost:5432/projects", source = "/home/user/src/", } {% endhighlight %} ``` You can then set the shell for the tunnel user to `/bin/false` and configure the rsyncd server side appropriately. Valid arguments for `tunnel` are: | Argument | Description | Default | Valid values | |------------|-------------------------------------------------------|-----------|-------------------------------| | mode | Mode in which the tunnel is run | command | command, pool | | command | _Required_ Command to run | nil | Table of arguments | | parallel | How many connections to run. Only for pool mode | 1 | 1+ | | retryDelay | Seconds to wait until tunnel is restarted | 10 | Number | | readyDelay | Seconds after program start to consider tunnel up | 5 | Number | | localhost | Name of the local host variable | localhost | String | ## Pool Mode In pool mode, lsyncd allocates a new local port which is then passed as variable to the host command. All variables can be substituded by `^variable` syntax. See [../../../../examples/lrsyncssh-tunnel.lua](lrsyncssh-tunnel.lua) for a extended configuration. ### List of variables | Name | Description | |------------|-----------------------------------------------| | localport | Port allocated for the selected connection | | localhost | Local hostname used. Default localhost | ### Example Run 2 tunnel ssh processes and 4 rsync processes at the same time. Use extra transfers for all files larger 30 MB. ```lua sync { default.rsync, tunnel = tunnel { command = {"ssh", "-N", "-L", "localhost:^localport:localhost:873", "user@testmachine"}, mode = "pool", parallel = 2, }, source = "/data/projects", target = "rsync://localhost:^localport/projects", delay = 5, batchSizeLimit = 1024 * 1024 * 30, maxProcesses = 4 } ``` This example will open 2 ssh connections for port forwarding and load balance 4 parallel rsync processes in a round roubin fashion. ### Workflow in Poolmodel When a sync with a tunnel parameter is started, all events are queued until the tunnel reaches the `UP` state, which is when one successful tunnel process exists for at least `readyDelay` seconds. Dead tunnel processes are automatically restarted. When the tunnel process count drops to 0, tunnel falls back to the `CONNECTING` state. There is a `retryDelay` seconds delay between each attempt to restart the tunnel. Once the tunnel is UP, a full transfer is initiated. Subsequent transfers are then load balanced over multiple connections. ### Notes on Poolmode * Pool mode only works with `rsync` backend, since there is no way to prevent multiple transfers to the same file in a relieable way, the rsync backend only supports `maxProcesses = 1` which renders pool mode useless. Since the remote side rsync daemon can prevent file trashing, the rsync backend is safe. ## Periodic Full-Sync *New in: 2.3.0* It is possible to trigger a full sync command from within lsync with the crontab feature. This requires that [lua-crontab](https://github.com/logiceditor-com/lua-crontab) is installed on the system. The crontab configuration accepts a list of `crontab` patterns to which a full sync will be triggered. ```lua sync { ... crontab = { -- does a full sync once a day at 3:00:01 "1 0 3 * * *", }, ... } ``` ### Field destination Each field is seperated by `" "` and can contain multiple values seperated by `,`. | FIELD | VALUES | SPECIAL CHARACTERS | |--------------|-----------------|--------------------| | Seconds | 0-59 | , - * | | Minutes | 0-59 | , - * | | Hours | 0-23 | , - * | | Day of month | 1-31 | , - * | | Month | 1-12 or JAN-DEC | , - * | | Day of week | 0-6 or SUN-SAT | , - * |