Update OctoJoom version and improve password validation #10

The OctoJoom version was updated to 3.6.2. Changes were also made to the password validation process to increase the minimum required length of the password from 4 to 11 characters for the correct error message.

README.md

@@ -1,140 +1,123 @@
-# Easy Docker Deployment (UBUNTU ONLY)
+<h2><img align="middle" src="https://raw.githubusercontent.com/odb/official-bash-logo/master/assets/Logos/Icons/PNG/64x64.png" >
+Octojoom - Easy Joomla! Docker Deployment
+</h2>
+
+Written by Llewellyn van der Merwe (@llewellynvdm)
+
 With this script we can easily deploy docker containers of Joomla and Openssh. This combination of these tools give rise to a powerful and very secure shared development environment.
 
-Both the installation and deployment script has **command input** options as seen in the menus below, but these command ar _not the only way_ to set these values. When the values are **omitted** you will be _asked in the terminal_ to manually enter the required values as needed. Furthermore, the use of **env variables** are also heavily used across the script. There are more than one .env file and the script will set those up for you whenever you run a task that make use of env variables the script will check if those values exist, and if they don't it will ask for them, and store them automatically for future use. That same time the output message to the terminal will show you where the specific .env file can be found.
+This program has **command input** options as seen in the menus below, but these command are _not the only way_ to set these values.
+When the values are **omitted** you will be _asked in the terminal_ to manually enter the required values as needed.
+Furthermore, the use of **env variables** are also heavily used across the script.
+There are more than one .env file and the script will set those up for you whenever you run a task that make use of env variables
+the script will check if those values exist, and if they don't it will ask for them, and store them automatically for future use.
+That same time the output message to the terminal will show you where the specific .env file can be found.
+
+Linted by [#ShellCheck](https://github.com/koalaman/shellcheck)
+
+> program only for ubuntu/debian systems at this time (should you like to use it on other OS's please open and issue...)
 
 ---
 # Install
 ```shell
-$ git clone https://git.vdm.dev/octoleo/docker-deploy.git
-$ cd docker-deploy/src
-$ sudo chmod +x install.sh
-$ sudo ./install.sh
-```
-> To see the installation help menu:
-```shell
-$ ./install.sh -h
+$ sudo curl -L "https://git.vdm.dev/api/v1/repos/octoleo/octojoom/raw/src/octojoom" -o /usr/local/bin/octojoom
+$ sudo chmod +x /usr/local/bin/octojoom
 ```
 
-### Help Menu (install)
-```txt
-Usage: ./install.sh [OPTION...]
-	Options
-	======================================================
-   --src-path=<path>|--src=<path>
-	set path to the script source folder
-	example: ./install.sh --src=/home/username/Docker/src
-	example: ./install.sh --src-path=/home/username/Docker/src
-	======================================================
-   --repo-path=<path>|--repo=<path>
-	set path to the repository folder
-	example: ./install.sh --repo=/home/username/Docker
-	example: ./install.sh --repo-path=/home/username/Docker
-	======================================================
-   --project-path=<path>|--project=<path>
-	set path to the projects folder
-	example: ./install.sh --project=/home/username/Projects
-	example: ./install.sh --project-path=/home/username/Projects
-	======================================================
-   -f|--force
-	force installation
-	example: ./install.sh -f
-	example: ./install.sh --force
-	======================================================
-   --host
-	always update your host file
-	example: ./install.sh --host
-	======================================================
-   -h|--help
-	display this help menu
-	example: ./install.sh -h
-	example: ./install.sh --help
-	======================================================
-			docker-deploy v1.0
-	======================================================
-```
 ---
 # Usage
 
 > To see the usage help menu
 ```shell
-$ docker-deploy -h
+$ octojoom -h
 ```
-### Help Menu (docker-deploy)
+### Help Menu (octojoom)
 ```txt
-Usage: docker-deploy [OPTION...]
+Usage: octojoom [OPTION...]
 	Options
 	======================================================
    --type <type>
 	set type you would like to work with
-	example: docker-deploy --type joomla
+	example: octojoom --type joomla
 	======================================================
    --task <task>
 	set type of task you would like to perform
-	example: docker-deploy --task setup
+	example: octojoom --task setup
+	======================================================
+   --container <container.domain.name>
+	Directly enabling or disabling a container with
+	  the type=joomla and task=enable/disable set
+	The container must exist, which means it was
+	  setup previously
+	Used without type and task Joomla-Enable is (default)
+	example: octojoom --container "io.vdm.dev"
 	======================================================
    --update
 	to update your install
-	example: docker-deploy --update
+	example: octojoom --update
+	======================================================
+   --access-token <token>
+	to update the program you will need an access token
+	from https://git.vdm.dev/user/settings/applications
+	example: octojoom --access-token xxxxxxxxxxx
 	======================================================
    --uninstall
 	to uninstall this script
-	example: docker-deploy --uninstall
+	example: octojoom --uninstall
 	======================================================
 	AVAILABLE FOR TO ANY CONTAINER
 	======================================================
    -k|--key <key>
 	set key for the docker compose container naming
 	!! no spaces allowed in the key !!
-	example: docker-deploy -k="vdm"
-	example: docker-deploy --key="vdm"
+	example: octojoom -k="vdm"
+	example: octojoom --key="vdm"
 	======================================================
    -e|--env-key <key>
 	set key for the environment variable naming
 	!! no spaces allowed in the key & must be UPPERCASE !!
-	example: docker-deploy -e="VDM"
-	example: docker-deploy --env-key="VDM"
+	example: octojoom -e="VDM"
+	example: octojoom --env-key="VDM"
 	======================================================
    -d|--domain <domain.com>
 	set key website domain
 	!! must be domain.tld !!
-	example: docker-deploy -d="vdm.dev"
-	example: docker-deploy --domain="vdm.dev"
-	======================================================
-	AVAILABLE FOR JOOMLA CONTAINER
-	======================================================
-   -j|--joomla-version <version>
-	set Joomla version number
-	!! only number allowed !!
-	example: docker-deploy -j=3.10
-	example: docker-deploy --joomla-version=3.10
+	example: octojoom -d="joomla.org"
+	example: octojoom --domain="joomla.org"
 	======================================================
    -s|--sub-domain <domain.com>
 	set key website sub domain
 	!! no spaces allowed in the sub domain !!
-	example: docker-deploy -s="jcb"
-	example: docker-deploy --sub-domain="jcb"
+	example: octojoom -s="jcb"
+	example: octojoom --sub-domain="jcb"
+	======================================================
+	AVAILABLE FOR JOOMLA CONTAINER
+	======================================================
+   -j|--joomla-version <version-tag>
+	see available tags here https://hub.docker.com/_/joomla
+	example: octojoom -j=5.0
+	example: octojoom --joomla-version=5.0
 	======================================================
 	AVAILABLE FOR OPENSSH CONTAINER
 	======================================================
    -u|--username <username>
 	set username of the container
-	example: docker-deploy -u="ubuntu"
-	example: docker-deploy --username="ubuntu"
+	example: octojoom -u="ubuntu"
+	example: octojoom --username="ubuntu"
 	======================================================
    --uid <id>
 	set container user id
-	example: docker-deploy --uid=1000
+	example: octojoom --uid=1000
 	======================================================
    --gid <id>
 	set container user group id
-	example: docker-deploy --gid=1000
+	example: octojoom --gid=1000
 	======================================================
    -p|--port <port>
 	set ssh port to use
 	!! do not use 22 !!
-	example: docker-deploy -p=2239
-	example: docker-deploy --port=2239
+	example: octojoom -p=2239
+	example: octojoom --port=2239
 	======================================================
    --ssh-dir <dir>
 	set ssh directory name found in the .ssh dir
@@ -142,34 +125,34 @@ Usage: docker-deploy [OPTION...]
 		This directory has separate files for
 		each public key allowed to access
 		the container
-	example: docker-deploy --ssh-dir="teamname"
+	example: octojoom --ssh-dir="teamname"
 	======================================================
    --sudo
 	switch to add the container user to the
 	sudo group of the container
-	example: docker-deploy --sudo
+	example: octojoom --sudo
 	======================================================
    -t|--time-zone <time/zone>
 	set time zone of the container
 	!! must valid time zone !!
-	example: docker-deploy -t="Africa/Windhoek"
-	example: docker-deploy --time-zone="Africa/Windhoek"
+	example: octojoom -t="Africa/Windhoek"
+	example: octojoom --time-zone="Africa/Windhoek"
 	======================================================
 	HELP ʕ•ᴥ•ʔ
 	======================================================
    -h|--help
 	display this help menu
-	example: docker-deploy -h
-	example: docker-deploy --help
+	example: octojoom -h
+	example: octojoom --help
 	======================================================
-			docker-deploy v1.0
+			Octojoom
 	======================================================
 ```
 ---
 # Uninstall
 
 ```shell
-$ docker-deploy --uninstall
+$ octojoom --uninstall
 ```
 ---
 # Free Software License

src/delete.sh

@@ -1,121 +0,0 @@
-#!/bin/bash
-
-# check that our enabled containers path is correct
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available" ] || {
-  echo "[error] Available containers path ${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available does not exist."
-  exit 1
-}
-
-# action to delete
-function askToDelete() {
-  # some house cleaning
-  PS3_old=$PS3
-  # set the local value
-  local question
-  local path
-  local target
-  # now set the values
-  question="$1"
-  path="$2"
-  target="$3"
-  # some defaults
-  echo "${question}"
-  # set the terminal
-  export PS3="[select]: "
-  # Start our little Menu
-  select yn in "Yes" "No"; do
-    case $yn in
-        Yes ) sudo rm -rf "${path}"; echo "[notice] ${target} was deleted.";;
-        No ) echo "[notice] ${target} was not deleted.";;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-}
-
-# get container available for deletion
-function getContainer() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select ${VDM_CONTAINER_TYPE} container deploy files to delete: "
-  # Start our little Menu
-  select menu in $(ls "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/"); do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the container
-CONTAINER="${1:-$CONTAINER}"
-[ ${#CONTAINER} -ge 1 ] && [ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" ] || {
-  CONTAINER=$(getContainer)
-  # make sure value was entered
-  [ ${#CONTAINER} -ge 1 ] && [ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" ] || exit
-}
-
-# disable
-if [ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}" ]; then
-  # make sure the docker image is stopped
-  docker-compose --file "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/docker-compose.yml" down
-  # then remove soft link
-  rm "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}"
-fi
-
-# remove the files with one last confirmation
-askToDelete \
-  "Are you absolutely sure you would like to complete delete the ${VDM_CONTAINER_TYPE} ${CONTAINER} deploy files?" \
-  "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" \
-  "${CONTAINER}"
-
-# check that our project path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Project path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# make sites available selection
-function getProjectsAvailable() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select persistent volume folder to delete: "
-  # Start our little Menu
-  select menu in $(ls "${VDM_PROJECT_PATH}"); do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the local values
-VDM_PROJECT="${2:-$VDM_PROJECT}"
-# check that we have what we need
-# shellcheck disable=SC2015
-[ ${#VDM_PROJECT} -ge 1 ] && [ -d "${VDM_PROJECT_PATH}/${VDM_PROJECT}" ] || {
-  VDM_PROJECT=$(getProjectsAvailable)
-  # make sure value was entered
-  [ ${#VDM_PROJECT} -ge 1 ] && [ -d "${VDM_PROJECT_PATH}/${VDM_PROJECT}" ] || exit
-}
-
-# remove the files with one last confirmation
-askToDelete \
-  "Are you absolutely sure you would like to delete the ${VDM_PROJECT} persistent volume folders?" \
-  "${VDM_PROJECT_PATH}/${VDM_PROJECT}" \
-  "${VDM_PROJECT}"

src/disable.sh

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-# check that our enabled containers path is correct
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled" ] || {
-  echo "[error] Enabled containers path ${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled does not exist."
-  exit 1
-}
-
-# get container enabled selection
-function getContainerEnabled() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select container to disable: "
-  # Start our little Menu
-  select menu in $(ls "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/"); do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the container
-CONTAINER="${1:-$CONTAINER}"
-# check that we have what we need
-# shellcheck disable=SC2015
-[ ${#CONTAINER} -ge 1 ] && [ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}" ] || {
-  CONTAINER=$(getContainerEnabled)
-  # make sure value was entered
-  [ ${#CONTAINER} -ge 1 ] && [ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}" ] || exit
-}
-
-# make sure the docker image is stopped
-docker-compose --file "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/docker-compose.yml" down
-# then remove soft link
-rm "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}"

src/docker-deploy.sh

@@ -1,466 +0,0 @@
-#!/bin/bash
-
-# BOT name
-BOT_NAME="docker-deploy v1.0"
-
-# the src folder path (where all the script are found)
-export VDM_SRC_PATH="/home/update/this/path/to/src"
-
-# we load global environment values
-# shellcheck disable=SC2015
-[ -f "${VDM_SRC_PATH}/.env" ] && source "${VDM_SRC_PATH}/.env" || {
-  echo "${VDM_SRC_PATH}/.env file not found, please run install."
-  exit 1
-}
-
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "Repository path (${VDM_REPO_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# help message ʕ•ᴥ•ʔ
-function show_help() {
-  cat <<EOF
-Usage: ${0##*/:-} [OPTION...]
-	Options
-	======================================================
-   --type <type>
-	set type you would like to work with
-	example: ${0##*/:-} --type joomla
-	======================================================
-   --task <task>
-	set type of task you would like to perform
-	example: ${0##*/:-} --task setup
-	======================================================
-   --update
-	to update your install
-	example: ${0##*/:-} --update
-	======================================================
-   --uninstall
-	to uninstall this script
-	example: ${0##*/:-} --uninstall
-	======================================================
-	AVAILABLE FOR TO ANY CONTAINER
-	======================================================
-   -k|--key <key>
-	set key for the docker compose container naming
-	!! no spaces allowed in the key !!
-	example: ${0##*/:-} -k="vdm"
-	example: ${0##*/:-} --key="vdm"
-	======================================================
-   -e|--env-key <key>
-	set key for the environment variable naming
-	!! no spaces allowed in the key & must be UPPERCASE !!
-	example: ${0##*/:-} -e="VDM"
-	example: ${0##*/:-} --env-key="VDM"
-	======================================================
-   -d|--domain <domain.com>
-	set key website domain
-	!! must be domain.tld !!
-	example: ${0##*/:-} -d="vdm.dev"
-	example: ${0##*/:-} --domain="vdm.dev"
-	======================================================
-	AVAILABLE FOR JOOMLA CONTAINER
-	======================================================
-   -j|--joomla-version <version>
-	set Joomla version number
-	!! only number allowed !!
-	example: ${0##*/:-} -j=3.10
-	example: ${0##*/:-} --joomla-version=3.10
-	======================================================
-   -s|--sub-domain <domain.com>
-	set key website sub domain
-	!! no spaces allowed in the sub domain !!
-	example: ${0##*/:-} -s="jcb"
-	example: ${0##*/:-} --sub-domain="jcb"
-	======================================================
-	AVAILABLE FOR OPENSSH CONTAINER
-	======================================================
-   -u|--username <username>
-	set username of the container
-	example: ${0##*/:-} -u="ubuntu"
-	example: ${0##*/:-} --username="ubuntu"
-	======================================================
-   --uid <id>
-	set container user id
-	example: ${0##*/:-} --uid=1000
-	======================================================
-   --gid <id>
-	set container user group id
-	example: ${0##*/:-} --gid=1000
-	======================================================
-   -p|--port <port>
-	set ssh port to use
-	!! do not use 22 !!
-	example: ${0##*/:-} -p=2239
-	example: ${0##*/:-} --port=2239
-	======================================================
-   --ssh-dir <dir>
-	set ssh directory name found in the .ssh dir
-	of this repo for the container keys
-		This directory has separate files for
-		each public key allowed to access
-		the container
-	example: ${0##*/:-} --ssh-dir="teamname"
-	======================================================
-   --sudo
-	switch to add the container user to the
-	sudo group of the container
-	example: ${0##*/:-} --sudo
-	======================================================
-   -t|--time-zone <time/zone>
-	set time zone of the container
-	!! must valid time zone !!
-	example: ${0##*/:-} -t="Africa/Windhoek"
-	example: ${0##*/:-} --time-zone="Africa/Windhoek"
-	======================================================
-	HELP ʕ•ᴥ•ʔ
-	======================================================
-   -h|--help
-	display this help menu
-	example: ${0##*/:-} -h
-	example: ${0##*/:-} --help
-	======================================================
-			${BOT_NAME}
-	======================================================
-EOF
-}
-
-# check if we have options
-while :; do
-  case $1 in
-  -h | --help)
-    show_help # Display a usage synopsis.
-    exit
-    ;;
-  --update)
-    VDM_CONTAINER_TYPE="update"
-    shift
-    ;;
-  --uninstall)
-    VDM_CONTAINER_TYPE="uninstall"
-    shift
-    ;;
-  --type) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_CONTAINER_TYPE=$2
-      shift
-    else
-      echo '[error] "--type" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --type=?*)
-    VDM_CONTAINER_TYPE=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --type=) # Handle the case of an empty --src-path=
-    echo '[error] "--type=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --task) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_TASK=$2
-      shift
-    else
-      echo '[error] "--task" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --task=?*)
-    VDM_TASK=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --task=) # Handle the case of an empty --src-path=
-    echo '[error] "--task=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -j | --joomla-version) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_JV=$2
-      shift
-    else
-      echo '[error] "--joomla-version" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -j=?* | --joomla-version=?*)
-    export VDM_JV=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -j= | --joomla-version=) # Handle the case of an empty --joomla-version=
-    echo '[error] "--joomla-version=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -k | --key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_KEY=$2
-      shift
-    else
-      echo '[error] "--key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -k=?* | --key=?*)
-    export VDM_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -k= | --key=) # Handle the case of an empty --key=
-    echo '[error] "--key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -e | --env-key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_ENV_KEY=$2
-      shift
-    else
-      echo '[error] "--env-key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -e=?* | --env-key=?*)
-    export VDM_ENV_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -e= | --env-key=) # Handle the case of an empty --env-key=
-    echo '[error] "--env-key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -d | --domain) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_DOMAIN=$2
-      shift
-    else
-      echo '[error] "--domain" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -d=?* | --domain=?*)
-    export VDM_DOMAIN=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -d= | --domain=) # Handle the case of an empty --domain=
-    echo '[error] "--domain=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -s | --sub-domain) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_SUBDOMAIN=$2
-      shift
-    else
-      echo '[error] "--sub-domain" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -s=?* | --sub-domain=?*)
-    export VDM_SUBDOMAIN=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -s= | --sub-domain=) # Handle the case of an empty --sub-domain=
-    echo '[error] "--sub-domain=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --sudo)
-    export VDM_SUDO_ACCESS=true
-    shift
-    ;;
-  -u | --username) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_USER_NAME=$2
-      shift
-    else
-      echo '[error] "--username" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -u=?* | --username=?*)
-    export VDM_USER_NAME=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -u= | --username=) # Handle the case of an empty --username=
-    echo '[error] "--username=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --uid) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_PUID=$2
-      shift
-    else
-      echo '[error] "--uid" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --uid=?*)
-    export VDM_PUID=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --uid=) # Handle the case of an empty --uid=
-    echo '[error] "--uid=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --gid) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_PGID=$2
-      shift
-    else
-      echo '[error] "--gid" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --gid=?*)
-    export VDM_PGID=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --gid=) # Handle the case of an empty --gid=
-    echo '[error] "--gid=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -p | --port) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_PORT=$2
-      shift
-    else
-      echo '[error] "--port" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -p=?* | --port=?*)
-    export VDM_PORT=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -p= | --port=) # Handle the case of an empty --port=
-    echo '[error] "--port=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --ssh-dir) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_PUBLIC_KEY_DIR=$2
-      shift
-    else
-      echo '[error] "--ssh-dir" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --ssh-dir=?*)
-    export VDM_PUBLIC_KEY_DIR=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -ssh-dir=) # Handle the case of an empty --ssh-dir=
-    echo '[error] "--ssh-dir=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -t | --time-zone) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      export VDM_TZ=$2
-      shift
-    else
-      echo '[error] "--time-zone" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -t=?* | --time-zone=?*)
-    export VDM_TZ=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -t= | --time-zone=) # Handle the case of an empty --time-zone=
-    echo '[error] "--time-zone=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  *) # Default case: No more options, so break out of the loop.
-    break ;;
-  esac
-  shift
-done
-
-# get container type
-function getContainerType() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select the type: "
-  # Start our little Menu
-  select menu in "joomla" "openssh" "traefik" "portainer" "update" "uninstall"; do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# check that we have what we need
-[ ${#VDM_CONTAINER_TYPE} -ge 1 ] || {
-  VDM_CONTAINER_TYPE=$(getContainerType)
-  # make sure value was entered
-  [ ${#VDM_CONTAINER_TYPE} -ge 1 ] || {
-    echo "[error] Wrong type selected"
-    exit 1
-  }
-}
-
-export VDM_CONTAINER_TYPE
-
-# get task type
-function getTaskType() {
-  # some house cleaning
-  PS3_old=$PS3
-  # build the selection based on the VDM_CONTAINER_TYPE
-  case "$VDM_CONTAINER_TYPE" in
-  "joomla")
-    options=("setup" "enable" "disable" "up" "down" "fix")
-    shift
-    ;;
-  "openssh")
-    options=("setup" "enable" "disable" "up" "down")
-    shift
-    ;;
-  *)
-    echo "[error] Wrong type selected (${VDM_CONTAINER_TYPE})"
-    exit 1
-    ;;
-  esac
-  # some defaults
-  export PS3="Please select the kind of task to perform on ${VDM_CONTAINER_TYPE}: "
-  # Start our little Menu
-  select menu in "${options[@]}"; do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-case "$VDM_CONTAINER_TYPE" in
-"traefik")
-  VDM_TASK="setup-traefik"
-  ;;
-"portainer")
-  VDM_TASK="setup-portainer"
-  ;;
-"update")
-  VDM_TASK="install"
-  ;;
-"uninstall")
-  VDM_TASK="uninstall"
-  ;;
-esac
-
-# check that we have what we need
-[ ${#VDM_TASK} -ge 1 ] || {
-  VDM_TASK=$(getTaskType)
-  # make sure value was entered
-  [ ${#VDM_TASK} -ge 1 ] || {
-    echo "[error] Wrong task type selected for ${VDM_CONTAINER_TYPE}"
-    exit 1
-  }
-}
-
-# run that task type script
-# shellcheck disable=SC1090
-source "${VDM_SRC_PATH}/${VDM_TASK}.sh"
-
-exit 0

src/down.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-
-# check that our enabled containers path is correct
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled" ] || {
-  echo "[error] Enabled containers path ${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled does not exist. This means no container is enabled."
-  exit 1
-}
-
-# the main function
-main() {
-	# get all zip files
-	for yml in "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/"*/*.yml; do
-		docker-compose --file "${yml}" down
-	done
-}
-
-# run main
-main

src/enable.sh

@@ -1,63 +0,0 @@
-#!/bin/bash
-
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/" ] || {
-  echo "[error] The path ${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/ does not exist, first run setup."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# get container available selection
-function getContainerAvailable() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select container to enable: "
-  # Start our little Menu
-  select menu in $(ls "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/"); do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the container
-CONTAINER="${1:-$CONTAINER}"
-# check that we have what we need
-# shellcheck disable=SC2015
-[ ${#CONTAINER} -ge 1 ] && [ -d "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" ] || {
-  CONTAINER=$(getContainerAvailable)
-  # make sure value was entered
-  [ ${#CONTAINER} -ge 1 ] && [ -d "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" ] || exit
-}
-
-# create the folder as needed
-mkdir -p "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/"
-
-# create the soft link
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}" ] || ln -s "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${CONTAINER}" "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}"
-# check if image has its own env file also
-ENV_FILE=''
-# shellcheck disable=SC2015
-[ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/.env" ] && ENV_FILE="${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/.env" || {
-  [ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && ENV_FILE="${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-}
-
-# make sure the docker image is started
-# shellcheck disable=SC2015
-[ ${#ENV_FILE} -ge 1 ] && docker-compose --env-file "${ENV_FILE}" --file "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/docker-compose.yml" up -d || {
-  docker-compose --file "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/${CONTAINER}/docker-compose.yml" up -d
-}
-# show env path used
-echo "[notice] EVN PATH: ${ENV_FILE}"

src/fix.sh

@@ -1,81 +0,0 @@
-#!/bin/bash
-
-# check that our project path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Project path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# make sites available selection
-function getProjectsAvailable() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select project to fix: "
-  # Start our little Menu
-  select menu in $(ls "${VDM_PROJECT_PATH}"); do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the local values
-VDM_PROJECT="${1:-$VDM_PROJECT}"
-# check that we have what we need
-# shellcheck disable=SC2015
-[ ${#VDM_PROJECT} -ge 1 ] && [ -d "${VDM_PROJECT_PATH}/${VDM_PROJECT}" ] || {
-  VDM_PROJECT=$(getProjectsAvailable)
-  # make sure value was entered
-  [ ${#VDM_PROJECT} -ge 1 ] && [ -d "${VDM_PROJECT_PATH}/${VDM_PROJECT}" ] || exit
-}
-
-### Fix the folder ownership of Joomla folders
-#
-echo "[notice] Fix the folder ownership of ${VDM_PROJECT} Joomla folders"
-#
-sudo chown -R www-data:www-data "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla"
-
-### Fix the folder permissions for the Joomla websites
-#
-echo "[notice] Fix the file and folder permissions for the ${VDM_PROJECT} Joomla website"
-#
-# Change the file permissions
-sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla" -type f -exec chmod 644 {} \;
-sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/configuration.php" -type f -exec chmod 444 {} \;
-[ -f "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/.htaccess" ] &&
-  sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/.htaccess" -type f -exec chmod 400 {} \;
-[ -f "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/php.ini" ] &&
-  sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/php.ini" -type f -exec chmod 400 {} \;
-# Change the folder permissions
-sudo find /"home/${USER}/Projects/${VDM_PROJECT}/joomla" -type d -exec chmod 755 {} \;
-# Change the image folder permissions
-# chmod 707 "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/images"
-# chmod 707 "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla/images/stories"
-
-### Fix the folder permissions so the active user (1000) can access the files
-#
-echo "[notice] Fix the folder permissions of ${VDM_PROJECT} joomla so user:1000 can access them"
-#
-sudo setfacl -R -m u:1000:rwx "${VDM_PROJECT_PATH}/${VDM_PROJECT}/joomla"
-
-### Fix the folder ownership of database folders
-#
-echo "[notice] Fix the folder ownership of ${VDM_PROJECT} database folders"
-#
-sudo chown -R systemd-coredump:systemd-coredump "${VDM_PROJECT_PATH}/${VDM_PROJECT}/db"
-
-### Fix the folder permissions for the database files
-#
-echo "[notice] Fix the file and folder permissions for the ${VDM_PROJECT} database files"
-#
-# Change the file permissions
-sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/db" -type f -exec chmod 660 {} \;
-sudo find "${VDM_PROJECT_PATH}/${VDM_PROJECT}/db" -type d -exec chmod 700 {} \;

src/host.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# check if we should add to host file
-if $VDM_UPDATE_HOST; then
-  # check if already in host file
-  if grep -q "${1:-$VDM_SUBDOMAIN}.${2:-$VDM_DOMAIN}" /etc/hosts; then
-    echo "[notice] ${USER^}, ${1:-$VDM_SUBDOMAIN}.${2:-$VDM_DOMAIN} is already in the /etc/hosts file."
-  else
-    # just a notice for now
-    echo "[notice] ${USER^}, you should add ${1:-$VDM_SUBDOMAIN}.${2:-$VDM_DOMAIN} to the /etc/hosts file."
-    # sudo echo "127.0.0.1       ${VDM_SUBDOMAIN}.${VDM_DOMAIN}" >> /etc/hosts
-  fi
-fi

src/install.sh

@@ -1,258 +0,0 @@
-#!/bin/bash
-
-# BOT name
-BOT_NAME="docker-deploy v1.0"
-
-# only install/setup docker once
-command -v docker >/dev/null 2>&1 || {
-  # remove old docker
-  sudo apt-get remove docker docker-engine docker.io containerd runc
-  # add docker repo
-  curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
-  # make sure we have dependencies installed
-  sudo apt-get update
-  sudo apt-get install \
-    ca-certificates \
-    curl \
-    gnupg \
-    lsb-release
-  # now install docker
-  sudo apt-get install docker-ce docker-ce-cli containerd.io
-  # start docker
-  sudo systemctl enable docker.service
-  # persist docker
-  udo systemctl enable containerd.service
-  # make sure the user is in the docker group
-  sudo groupadd docker
-  sudo usermod -aG docker "$USER"
-}
-
-# only install docker-compose once
-command -v docker-compose >/dev/null 2>&1 || {
-  sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
-  sudo chmod +x /usr/local/bin/docker-compose
-}
-
-# get script path
-VDM_SRC_PATH="${BASH_SOURCE%/*}"
-if [[ ! -d "$VDM_SRC_PATH" || "$VDM_SRC_PATH" == '.' ]]; then VDM_SRC_PATH="$PWD"; fi
-
-# some globals
-VDM_FORCE_INSTALL=false
-VDM_UPDATE_HOST=false
-
-# help message ʕ•ᴥ•ʔ
-function show_help() {
-  cat <<EOF
-Usage: ${0##*/:-} [OPTION...]
-	Options
-	======================================================
-   --src-path=<path>|--src=<path>
-	set path to the script source folder
-	example: ${0##*/:-} --src=/home/$USER/Docker/src
-	example: ${0##*/:-} --src-path=/home/$USER/Docker/src
-	======================================================
-   --repo-path=<path>|--repo=<path>
-	set path to the repository folder
-	example: ${0##*/:-} --repo=/home/$USER/Docker
-	example: ${0##*/:-} --repo-path=/home/$USER/Docker
-	======================================================
-   --project-path=<path>|--project=<path>
-	set path to the projects folder
-	example: ${0##*/:-} --project=/home/$USER/Projects
-	example: ${0##*/:-} --project-path=/home/$USER/Projects
-	======================================================
-   -f|--force
-	force installation
-	example: ${0##*/:-} -f
-	example: ${0##*/:-} --force
-	======================================================
-   --host
-	always update your host file
-	example: ${0##*/:-} --host
-	======================================================
-   -h|--help
-	display this help menu
-	example: ${0##*/:-} -h
-	example: ${0##*/:-} --help
-	======================================================
-			${BOT_NAME}
-	======================================================
-EOF
-}
-
-# check if we have options
-while :; do
-  case $1 in
-  -h | --help)
-    show_help # Display a usage synopsis.
-    exit
-    ;;
-  -f | --force)
-    VDM_FORCE_INSTALL=true
-    shift
-    ;;
-  --host)
-    VDM_UPDATE_HOST=true
-    shift
-    ;;
-  --src-path | --src) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_SRC_PATH=$2
-      shift
-    else
-      echo '[error] "--src-path" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --src-path=?* | --src=?*)
-    VDM_SRC_PATH=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --src-path= | --src=) # Handle the case of an empty --src-path=
-    echo '[error] "--src-path=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --repo-path | --repo) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_REPO_PATH=$2
-      shift
-    else
-      echo '[error] "--repo-path" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --repo-path=?* | --repo=?*)
-    VDM_REPO_PATH=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --repo-path= | --repo=) # Handle the case of an empty --repo-path=
-    echo '[error] "--repo-path=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --project-path | --project) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_PROJECT_PATH=$2
-      shift
-    else
-      echo '[error] "--project-path" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --project-path=?* | --project=?*)
-    VDM_PROJECT_PATH=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --project-path= | --project=) # Handle the case of an empty --project-path=
-    echo '[error] "---project-path=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  *) # Default case: No more options, so break out of the loop.
-    break ;;
-  esac
-  shift
-done
-
-# make source path available to other scripts
-export VDM_SRC_PATH="${VDM_SRC_PATH}"
-
-# now we get the repository path
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "[notice] The repository full path is where the container .yml files will live."
-  echo -n "[enter:${VDM_SRC_PATH%/src}] Repository Full Path: "
-  read -r VDM_REPO_PATH
-  # make sure it exist
-  # shellcheck disable=SC2015
-  [ ${#VDM_REPO_PATH} -ge 1 ] && [ -d "${VDM_REPO_PATH}" ] || {
-    # we set the default
-    VDM_REPO_PATH="${VDM_SRC_PATH%/src}"
-    ## check if this exist
-    [ -d "${VDM_REPO_PATH}" ] || {
-      echo "[error] Repository path (${VDM_REPO_PATH}) does not exist."
-      exit 1
-    }
-  }
-}
-
-# we set the repo path (easy)
-grep -q "VDM_REPO_PATH=\"${VDM_REPO_PATH}\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_REPO_PATH=\"${VDM_REPO_PATH}\"" >"${VDM_SRC_PATH}/.env"
-export VDM_REPO_PATH="${VDM_REPO_PATH}"
-
-grep -q "VDM_UPDATE_HOST=${VDM_UPDATE_HOST}" "${VDM_SRC_PATH}/.env" || echo "export VDM_UPDATE_HOST=${VDM_UPDATE_HOST}" >>"${VDM_SRC_PATH}/.env"
-export VDM_UPDATE_HOST
-
-# notice about the repo path
-echo "[notice] $VDM_REPO_PATH was set as the repository path in ${VDM_SRC_PATH}/.env"
-
-# now we must set the Projects path
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo -n "[enter:/home/${USER}/Projects] Projects Full Path: "
-  read -r VDM_PROJECT_PATH
-  # make sure it exist
-  # shellcheck disable=SC2015
-  [ ${#VDM_PROJECT_PATH} -ge 1 ] && [ -d "${VDM_PROJECT_PATH}" ] || {
-    # we set the default
-    VDM_PROJECT_PATH="/home/${USER}/Projects"
-    ## check if this exist
-    [ -d "${VDM_PROJECT_PATH}" ] || {
-      echo "[error] Project path (${VDM_PROJECT_PATH}) does not exist."
-      exit 1
-    }
-  }
-}
-
-# we set the projects path (easy)
-grep -q "VDM_PROJECT_PATH=\"${VDM_PROJECT_PATH}\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_PROJECT_PATH=\"${VDM_PROJECT_PATH}\"" >>"${VDM_SRC_PATH}/.env"
-export VDM_PROJECT_PATH="${VDM_PROJECT_PATH}"
-
-# notice about the projects path
-echo "[notice] $VDM_PROJECT_PATH was set as the project path in ${VDM_SRC_PATH}/.env"
-
-# now we set the docker-deploy script in the executable path of this user
-if [ ! $VDM_FORCE_INSTALL ]; then
-  [ -f /usr/local/bin/docker-deploy ] && {
-    echo "[error] /usr/local/bin/docker-deploy already exist! you can force installation:"
-    echo "[fix] $ ${0##*/:-} -f"
-    exit 1
-  }
-  sudo cp "${VDM_SRC_PATH}/docker-deploy.sh" /usr/local/bin/docker-deploy
-else
-  sudo cp -f "${VDM_SRC_PATH}/docker-deploy.sh" /usr/local/bin/docker-deploy
-fi
-
-# we need to add helper for our docker-deploy script to find the .env file
-sudo sed -i -e "s|/home/update/this/path/to/src|${VDM_SRC_PATH}|g" /usr/local/bin/docker-deploy
-
-# notice of the src path
-echo "[notice] ${VDM_SRC_PATH} is the src path to all scripts, and should not be deleted."
-
-# we first make sure run is executable
-echo "[sudo] making the /usr/local/bin/docker-deploy script executable"
-sudo chmod +x "/usr/local/bin/docker-deploy"
-
-# Note: If the command docker-deploy fails after installation, check your path.
-# You can also create a symbolic link to /usr/bin or any other directory in your path.
-#   For example:
-# $ sudo ln -s /usr/local/bin/docker-deploy /usr/bin/docker-deploy
-
-# we load global environment values
-# shellcheck disable=SC2015
-[ -f "${VDM_SRC_PATH}/.env" ] && source "${VDM_SRC_PATH}/.env"
-
-# check if we should setup traefik
-echo -n "[enter:y] Setup Traefik (y/n): "
-read -r VDM_SETUP_TRAEFIK
-# make sure value was entered
-if [ "${VDM_SETUP_TRAEFIK,,}" != 'n' ]; then
-  # run that task type script
-  # shellcheck disable=SC1090
-  source "${VDM_SRC_PATH}/setup-traefik.sh"
-fi
-# check if we should setup portainer
-echo -n "[enter:y] Setup Portainer (y/n): "
-read -r VDM_SETUP_PORTAINER
-# make sure value was entered
-if [ "${VDM_SETUP_PORTAINER,,}" != 'n' ]; then
-  # run that task type script
-  # shellcheck disable=SC1090
-  source "${VDM_SRC_PATH}/setup-portainer.sh"
-fi
-
-exit 0

src/setup-joomla.sh

@@ -1,354 +0,0 @@
-#!/bin/bash
-
-# BOT name
-BOT_NAME="docker-deploy v1.0"
-
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "[error] Repository path (${VDM_REPO_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-# be sure to create the container type path
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}"
-
-# check if we have global env file
-# shellcheck disable=SC1090
-# shellcheck disable=SC2015
-[ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && source "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" || {
-  touch "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  chmod 600 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-}
-
-# we must get a random key
-function getPass() {
-  # simple basic random
-  # shellcheck disable=SC2046
-  echo $(tr -dc 'A-HJ-NP-Za-km-z2-9' </dev/urandom | dd bs="${1:-128}" count=1 status=none)
-}
-
-# help message ʕ•ᴥ•ʔ
-function show_help() {
-  cat <<EOF
-Usage: ${0##*/:-} [OPTION...]
-	Options
-	======================================================
-   -j|--joomla-version <version>
-	set Joomla version number
-	!! only number allowed !!
-	example: ${0##*/:-} -j=3.10
-	example: ${0##*/:-} --joomla-version=3.10
-	======================================================
-   -k|--key <key>
-	set key for the docker compose container naming
-	!! no spaces allowed in the key !!
-	example: ${0##*/:-} -k="vdm"
-	example: ${0##*/:-} --key="vdm"
-	======================================================
-   -e|--env-key <key>
-	set key for the environment variable naming
-	!! no spaces allowed in the key & must be UPPERCASE !!
-	example: ${0##*/:-} -e="VDM"
-	example: ${0##*/:-} --env-key="VDM"
-	======================================================
-   -d|--domain <domain.com>
-	set key website domain
-	!! must be domain.tld !!
-	example: ${0##*/:-} -d="vdm.dev"
-	example: ${0##*/:-} --domain="vdm.dev"
-	======================================================
-   -s|--sub-domain <domain.com>
-	set key website sub domain
-	!! no spaces allowed in the sub domain !!
-	example: ${0##*/:-} -s="jcb"
-	example: ${0##*/:-} --sub-domain="jcb"
-	======================================================
-   -h|--help
-	display this help menu
-	example: ${0##*/:-} -h
-	example: ${0##*/:-} --help
-	======================================================
-			${BOT_NAME}
-	======================================================
-EOF
-}
-
-# set the local values
-while :; do
-  case $1 in
-  -h | --help)
-    show_help # Display a usage synopsis.
-    exit
-    ;;
-  -j | --joomla-version) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_JV=$2
-      shift
-    else
-      echo '[error] "--joomla-version" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -j=?* | --joomla-version=?*)
-    VDM_JV=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -j= | --joomla-version=) # Handle the case of an empty --joomla-version=
-    echo '[error] "--joomla-version=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -k | --key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_KEY=$2
-      shift
-    else
-      echo '[error] "--key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -k=?* | --key=?*)
-    VDM_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -k= | --key=) # Handle the case of an empty --key=
-    echo '[error] "--key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -e | --env-key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_ENV_KEY=$2
-      shift
-    else
-      echo '[error] "--env-key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -e=?* | --env-key=?*)
-    VDM_ENV_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -e= | --env-key=) # Handle the case of an empty --env-key=
-    echo '[error] "--env-key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -d | --domain) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_DOMAIN=$2
-      shift
-    else
-      echo '[error] "--domain" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -d=?* | --domain=?*)
-    VDM_DOMAIN=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -d= | --domain=) # Handle the case of an empty --domain=
-    echo '[error] "--domain=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -s | --sub-domain) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_SUBDOMAIN=$2
-      shift
-    else
-      echo '[error] "--sub-domain" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -s=?* | --sub-domain=?*)
-    VDM_SUBDOMAIN=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -s= | --sub-domain=) # Handle the case of an empty --sub-domain=
-    echo '[error] "--sub-domain=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  *) # Default case: No more options, so break out of the loop.
-    break ;;
-  esac
-  shift
-done
-
-# check that we have what we need
-[ ${#VDM_JV} -ge 1 ] || {
-  echo -n "[enter] Joomla Version: "
-  read -r VDM_JV
-  # make sure value was entered
-  [ ${#VDM_JV} -ge 1 ] || exit
-}
-[ ${#VDM_KEY} -ge 1 ] || {
-  echo -n "[enter] key: "
-  read -r VDM_KEY
-  # make sure value was entered
-  [ ${#VDM_KEY} -ge 1 ] || exit
-}
-[ ${#VDM_ENV_KEY} -ge 1 ] || {
-  echo -n "[enter:A] env key: "
-  read -r VDM_ENV_KEY
-  # make sure value was entered
-  [ ${#VDM_ENV_KEY} -ge 1 ] || VDM_ENV_KEY="A"
-}
-[ ${#VDM_SUBDOMAIN} -ge 1 ] || {
-  echo -n "[enter:${VDM_KEY}] Sub-domain: "
-  read -r VDM_SUBDOMAIN
-  # make sure value was entered
-  [ ${#VDM_SUBDOMAIN} -ge 1 ] || VDM_SUBDOMAIN=${VDM_KEY}
-}
-[ ${#VDM_DOMAIN} -ge 1 ] || {
-  VDM_DOMAIN="vdm.dev"
-}
-# check the security switch
-REMOVE_SECURE=''
-ENTRY_POINT="websecure"
-# setup letsencrypt stuff
-if [ "${VDM_SECURE,,}" == 'y' ]; then
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"y\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"y\"" >>"${VDM_SRC_PATH}/.env"
-else
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"n\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"n\"" >>"${VDM_SRC_PATH}/.env"
-  # remove secure from build
-  REMOVE_SECURE="#"
-  ENTRY_POINT="web"
-fi
-# check if env is already set
-# shellcheck disable=SC2015
-[ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && grep -q "VDM_${VDM_ENV_KEY}_DB=" "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" || {
-  # add a space or create the file
-  [ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && echo '' >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  # get the database name needed
-  echo -n "[enter:vdm_io] Database name: "
-  read -r vdm_database_name
-  # make sure value was entered
-  [ ${#vdm_database_name} -ge 1 ] || vdm_database_name="vdm_io"
-  # add to env
-  echo "VDM_${VDM_ENV_KEY}_DB=\"${vdm_database_name}\"" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  # get the database user name needed
-  echo -n "[enter:vdm_user] Database user: "
-  read -r vdm_database_user
-  # make sure value was entered
-  [ ${#vdm_database_user} -ge 1 ] || vdm_database_user="vdm_user"
-  # add to env
-  echo "VDM_${VDM_ENV_KEY}_DB_USER=\"${vdm_database_user}\"" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  # get the database user name needed
-  echo -n "[enter:random] Database user password: "
-  read -r vdm_database_pass
-  # make sure value was entered
-  [ ${#vdm_database_pass} -ge 1 ] || vdm_database_pass=$(getPass 20)
-  # add to env
-  echo "VDM_${VDM_ENV_KEY}_DB_PASS=\"${vdm_database_pass}\"" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  # get the database user name needed
-  echo -n "[enter:random] Database root password: "
-  read -r vdm_database_rootpass
-  # make sure value was entered
-  [ ${#vdm_database_rootpass} -ge 1 ] || vdm_database_rootpass=$(getPass 40)
-  # add to env
-  echo "VDM_${VDM_ENV_KEY}_DB_ROOT=\"${vdm_database_rootpass}\"" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  # add the projects path
-  grep -q "VDM_PROJECT_PATH=" "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" || {
-    # add to env
-    echo "VDM_PROJECT_PATH=\"${VDM_PROJECT_PATH}\"" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  }
-}
-
-# build function
-function buildContainer() {
-  # we build the yml file
-  cat <<EOF
-version: '2'
-services:
-  mariadb_${VDM_KEY}:
-    image: mariadb:latest
-    container_name: mariadb_${VDM_KEY}
-    restart: unless-stopped
-    environment:
-      - MARIADB_DATABASE=\${VDM_${VDM_ENV_KEY}_DB}
-      - MARIADB_USER=\${VDM_${VDM_ENV_KEY}_DB_USER}
-      - MARIADB_PASSWORD=\${VDM_${VDM_ENV_KEY}_DB_PASS}
-      - MARIADB_ROOT_PASSWORD=\${VDM_${VDM_ENV_KEY}_DB_ROOT}
-    volumes:
-      - "\${VDM_PROJECT_PATH}/${VDM_KEY}/db:/var/lib/mysql"
-    networks:
-      - traefik
-  joomla_${VDM_KEY}:
-    image: joomla:${VDM_JV}
-    container_name: joomla_${VDM_KEY}
-    restart: unless-stopped
-    environment:
-      - JOOMLA_DB_HOST=mariadb_${VDM_KEY}:3306
-      - JOOMLA_DB_NAME=\${VDM_${VDM_ENV_KEY}_DB}
-      - JOOMLA_DB_USER=\${VDM_${VDM_ENV_KEY}_DB_USER}
-      - JOOMLA_DB_PASSWORD=\${VDM_${VDM_ENV_KEY}_DB_PASS}
-    depends_on:
-      - mariadb_${VDM_KEY}
-    volumes:
-      - "\${VDM_PROJECT_PATH}/${VDM_KEY}/joomla:/var/www/html"
-    networks:
-      - traefik
-    labels:
-      # joomla
-      - "traefik.enable=true"
-      - "traefik.http.routers.joomla_${VDM_KEY}.rule=Host(\`${VDM_SUBDOMAIN}.${VDM_DOMAIN}\`)"
-      - "traefik.http.routers.joomla_${VDM_KEY}.entrypoints=${ENTRY_POINT}"
-${REMOVE_SECURE}      - "traefik.http.routers.joomla_${VDM_KEY}.tls.certresolver=vdmresolver"
-      - "traefik.http.routers.joomla_${VDM_KEY}.service=joomla_${VDM_KEY}"
-      - "traefik.http.services.joomla_${VDM_KEY}.loadbalancer.server.port=80"
-  phpmyadmin_${VDM_KEY}:
-    image: phpmyadmin/phpmyadmin
-    container_name: phpmyadmin_${VDM_KEY}
-    restart: unless-stopped
-    environment:
-      PMA_HOST: mariadb_${VDM_KEY}
-      PMA_PORT: 3306
-      UPLOAD_LIMIT: 300M
-    depends_on:
-      - mariadb_${VDM_KEY}
-    networks:
-      - traefik
-    labels:
-      # phpmyadmin
-      - "traefik.enable=true"
-      - "traefik.http.routers.phpmyadmin_${VDM_KEY}.rule=Host(\`${VDM_SUBDOMAIN}db.${VDM_DOMAIN}\`)"
-      - "traefik.http.routers.phpmyadmin_${VDM_KEY}.entrypoints=${ENTRY_POINT}"
-${REMOVE_SECURE}      - "traefik.http.routers.phpmyadmin_${VDM_KEY}.tls.certresolver=vdmresolver"
-      - "traefik.http.routers.phpmyadmin_${VDM_KEY}.service=phpmyadmin_${VDM_KEY}"
-      - "traefik.http.services.phpmyadmin_${VDM_KEY}.loadbalancer.server.port=80"
-
-
-networks:
-  traefik:
-    external:
-      name: traefik_webgateway
-EOF
-}
-
-# set host file if needed
-source "${VDM_SRC_PATH}/host.sh"
-
-# create the directory if it does not yet already exist
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_SUBDOMAIN}.${VDM_DOMAIN}"
-# place this docker composer file in its place
-buildContainer >"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_SUBDOMAIN}.${VDM_DOMAIN}/docker-compose.yml"
-# set permissions
-chmod 600 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_SUBDOMAIN}.${VDM_DOMAIN}/docker-compose.yml"
-# saved the file
-echo "[save] ${VDM_CONTAINER_TYPE}:docker-compose.yml"
-# some house cleaning
-PS3_old=$PS3
-# ask if we should right now enable the container
-echo "[question] Would you like to enable this new ${VDM_CONTAINER_TYPE} container?"
-# set the terminal
-export PS3="[select]: "
-# shellcheck disable=SC1090
-select yn in "Yes" "No"; do
-  case $yn in
-      Yes ) source "${VDM_SRC_PATH}/enable.sh" "${VDM_SUBDOMAIN}.${VDM_DOMAIN}";;
-  esac
-  break
-done
-# restore the default
-export PS3=$PS3_old
-echo "[setup] Completed!"

src/setup-openssh.sh

@@ -1,455 +0,0 @@
-#!/bin/bash
-
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "[error] Repository path (${VDM_REPO_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-# be sure to create the container type path
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}"
-# be sure to .ssh path exist
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.ssh"
-
-# check if we have global env file
-# shellcheck disable=SC1090
-# shellcheck disable=SC2015
-[ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && source "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" || {
-  touch "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  chmod 600 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-}
-
-# help message ʕ•ᴥ•ʔ
-function show_help() {
-  cat <<EOF
-Usage: ${0##*/:-} [OPTION...]
-	Options
-	======================================================
-   -u|--username <username>
-	set username of the container
-	example: ${0##*/:-} -u="ubuntu"
-	example: ${0##*/:-} --username="ubuntu"
-	======================================================
-   --uid <id>
-	set container user id
-	example: ${0##*/:-} --uid=1000
-	======================================================
-   --gid <id>
-	set container user group id
-	example: ${0##*/:-} --gid=1000
-	======================================================
-   -p|--port <port>
-	set ssh port to use
-	!! do not use 22 !!
-	example: ${0##*/:-} -p=2239
-	example: ${0##*/:-} --port=2239
-	======================================================
-   --ssh-dir <dir>
-	set ssh directory name found in the .ssh dir
-	of this repo for the container keys
-		This directory has separate files for
-		each public key allowed to access
-		the container
-	example: ${0##*/:-} --ssh-dir="teamname"
-	======================================================
-   --sudo
-	switch to add the container user to the
-	sudo group of the container
-	example: ${0##*/:-} --sudo
-	======================================================
-   -k|--key <key>
-	set key for the docker compose container naming
-	!! no spaces allowed in the key !!
-	example: ${0##*/:-} -k="vdm"
-	example: ${0##*/:-} --key="vdm"
-	======================================================
-   -e|--env-key <key>
-	set key for the environment variable naming
-	!! no spaces allowed in the key & must be UPPERCASE !!
-	example: ${0##*/:-} -e="VDM"
-	example: ${0##*/:-} --env-key="VDM"
-	======================================================
-   -d|--domain <domain.com>
-	set key website domain
-	!! must be domain.tld !!
-	example: ${0##*/:-} -d="vdm.dev"
-	example: ${0##*/:-} --domain="vdm.dev"
-	======================================================
-   -t|--time-zone <time/zone>
-	set time zone of the container
-	!! must valid time zone !!
-	example: ${0##*/:-} -t="Africa/Windhoek"
-	example: ${0##*/:-} --time-zone="Africa/Windhoek"
-	======================================================
-   -h|--help
-	display this help menu
-	example: ${0##*/:-} -h
-	example: ${0##*/:-} --help
-	======================================================
-			${BOT_NAME}
-	======================================================
-EOF
-}
-
-# set the local values
-while :; do
-  case $1 in
-  -h | --help)
-    show_help # Display a usage synopsis.
-    exit
-    ;;
-  --sudo)
-    VDM_SUDO_ACCESS=true
-    shift
-    ;;
-  -u | --username) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_USER_NAME=$2
-      shift
-    else
-      echo '[error] "--username" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -u=?* | --username=?*)
-    VDM_USER_NAME=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -u= | --username=) # Handle the case of an empty --username=
-    echo '[error] "--username=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --uid) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_PUID=$2
-      shift
-    else
-      echo '[error] "--uid" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --uid=?*)
-    VDM_PUID=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --uid=) # Handle the case of an empty --uid=
-    echo '[error] "--uid=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --gid) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_PGID=$2
-      shift
-    else
-      echo '[error] "--gid" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --gid=?*)
-    VDM_PGID=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  --gid=) # Handle the case of an empty --gid=
-    echo '[error] "--gid=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -p | --port) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_PORT=$2
-      shift
-    else
-      echo '[error] "--port" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -p=?* | --port=?*)
-    VDM_PORT=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -p= | --port=) # Handle the case of an empty --port=
-    echo '[error] "--port=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  --ssh-dir) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_PUBLIC_KEY_DIR=$2
-      shift
-    else
-      echo '[error] "--ssh-dir" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  --ssh-dir=?*)
-    VDM_PUBLIC_KEY_DIR=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -ssh-dir=) # Handle the case of an empty --ssh-dir=
-    echo '[error] "--ssh-dir=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -k | --key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_KEY=$2
-      shift
-    else
-      echo '[error] "--key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -k=?* | --key=?*)
-    VDM_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -k= | --key=) # Handle the case of an empty --key=
-    echo '[error] "--key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -e | --env-key) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_ENV_KEY=$2
-      shift
-    else
-      echo '[error] "--env-key" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -e=?* | --env-key=?*)
-    VDM_ENV_KEY=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -e= | --env-key=) # Handle the case of an empty --env-key=
-    echo '[error] "--env-key=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -d | --domain) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_DOMAIN=$2
-      shift
-    else
-      echo '[error] "--domain" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -d=?* | --domain=?*)
-    VDM_DOMAIN=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -d= | --domain=) # Handle the case of an empty --domain=
-    echo '[error] "--domain=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  -t | --time-zone) # Takes an option argument; ensure it has been specified.
-    if [ "$2" ]; then
-      VDM_TZ=$2
-      shift
-    else
-      echo '[error] "--time-zone" requires a non-empty option argument.'
-      exit 17
-    fi
-    ;;
-  -t=?* | --time-zone=?*)
-    VDM_TZ=${1#*=} # Delete everything up to "=" and assign the remainder.
-    ;;
-  -t= | --time-zone=) # Handle the case of an empty --time-zone=
-    echo '[error] "--time-zone=" requires a non-empty option argument.'
-    exit 17
-    ;;
-  *) # Default case: No more options, so break out of the loop.
-    break ;;
-  esac
-  shift
-done
-
-# check that we have what we need
-[ ${#VDM_PORT} -ge 1 ] || {
-  echo -n "[enter] SSH Port: "
-  read -r VDM_PORT
-  # make sure value was entered
-  [ ${#VDM_PORT} -ge 1 ] || exit
-}
-[ ${#VDM_USER_NAME} -ge 1 ] || {
-  echo -n "[enter:ubuntu] UserName: "
-  read -r VDM_USER_NAME
-}
-[ ${#VDM_KEY} -ge 1 ] || {
-  echo -n "[enter:${VDM_USER_NAME:-ubuntu}] key: "
-  read -r VDM_KEY
-  # make sure value was entered
-  [ ${#VDM_KEY} -ge 1 ] || VDM_KEY="${VDM_USER_NAME:-ubuntu}"
-}
-[ ${#VDM_ENV_KEY} -ge 1 ] || {
-  echo -n "[enter:A] env key: "
-  read -r VDM_ENV_KEY
-  # make sure value was entered
-  [ ${#VDM_ENV_KEY} -ge 1 ] || VDM_ENV_KEY="A"
-}
-# we must get the global public key path
-VDM_ENV_PUBLIC_KEY_GLOBAL_DIR="VDM_${VDM_ENV_KEY^^}_PUBLIC_KEY_GLOBAL_DIR"
-VDM_PUBLIC_KEY_GLOBAL_DIR=${!VDM_ENV_PUBLIC_KEY_GLOBAL_DIR}
-# shellcheck disable=SC2015
-[ ${#VDM_PUBLIC_KEY_GLOBAL_DIR} -ge 1 ] && [ -d "${VDM_PUBLIC_KEY_GLOBAL_DIR}" ] || {
-  VDM_PUBLIC_KEY_GLOBAL_DIR="${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.ssh"
-  # make sure value was entered
-  [ ${#VDM_PUBLIC_KEY_GLOBAL_DIR} -ge 1 ] && [ -d "${VDM_PUBLIC_KEY_GLOBAL_DIR}" ] || exit
-  # add to env file
-  echo "${VDM_ENV_PUBLIC_KEY_GLOBAL_DIR}=${VDM_PUBLIC_KEY_GLOBAL_DIR}" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-}
-# get available public dir
-function getPublicKeyDir() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="[select] Public ssh key directory: "
-  # we start the selection array
-  local SELECTED
-  # Start our little Menu
-  select public_dir in $(ls "${VDM_PUBLIC_KEY_GLOBAL_DIR}"); do
-    case $REPLY in
-    *)
-      SELECTED="${public_dir}"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "${SELECTED}"
-}
-
-[ ${#VDM_PUBLIC_KEY_DIR} -ge 1 ] || {
-  VDM_PUBLIC_KEY_DIR=$(getPublicKeyDir)
-  # make sure value was entered
-  [ ${#VDM_PUBLIC_KEY_DIR} -ge 1 ] && [ -d "${VDM_PUBLIC_KEY_GLOBAL_DIR}/${VDM_PUBLIC_KEY_DIR}" ] || exit
-}
-# set the global key env string for the ssh keys
-VDM_ENV_PUBLIC_KEY_U_DIR="VDM_${VDM_ENV_KEY^^}_PUBLIC_KEY_${VDM_PUBLIC_KEY_DIR^^}_DIR"
-VDM_PUBLIC_KEY_U_DIR=${!VDM_ENV_PUBLIC_KEY_U_DIR}
-# check if env is already set
-# shellcheck disable=SC2015
-[ -f "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" ] && grep -q "${VDM_ENV_PUBLIC_KEY_U_DIR}=" "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env" || {
-  # add to env if not exist
-  [ ${#VDM_PUBLIC_KEY_U_DIR} -ge 1 ] && [ -d "${VDM_PUBLIC_KEY_U_DIR}" ] || {
-    echo "${VDM_ENV_PUBLIC_KEY_U_DIR}=${VDM_PUBLIC_KEY_GLOBAL_DIR}/${VDM_PUBLIC_KEY_DIR}" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-  }
-}
-# we must get the project path
-VDM_ENV_PROJECT_DIR="VDM_${VDM_ENV_KEY^^}_PROJECT_DIR"
-VDM_PROJECT_DIR=${!VDM_ENV_PROJECT_DIR}
-# shellcheck disable=SC2015
-[ ${#VDM_PROJECT_DIR} -ge 1 ] && [ -d "${VDM_PROJECT_DIR}" ] || {
-  VDM_PROJECT_DIR="${VDM_PROJECT_PATH}"
-  # make sure value was entered
-  [ ${#VDM_PROJECT_DIR} -ge 1 ] && [ -d "${VDM_PROJECT_DIR}" ] || exit
-  # add to env file
-  echo "VDM_${VDM_ENV_KEY^^}_PROJECT_DIR=${VDM_PROJECT_DIR}" >>"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-}
-# return volume line
-function getVolumeLine() {
-  # get the projects to mount
-  local line="$1"
-  # return line
-  cat <<EOF
-
-      - ${line}
-EOF
-}
-# get available mounting projects
-function getMountingProjects() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  # some defaults
-  export PS3="[select] Projects to mount: "
-  # some buckets
-  FINISHED="n"
-  SELECTED=$(getVolumeLine "\${${VDM_ENV_PUBLIC_KEY_U_DIR}}:/config/ssh_public_keys")
-  until [ "${FINISHED}" = "y" ]; do
-    # Start our little Menu
-    select key in $(ls "${VDM_PROJECT_DIR}"); do
-      case $REPLY in
-      q | quit)
-        FINISHED="y"
-        ;;
-      *)
-        SELECTED+=$(getVolumeLine "\${VDM_${VDM_ENV_KEY^^}_PROJECT_DIR}/${key}/joomla:/app/${key}")
-        FINISHED="n"
-        ;;
-      esac
-      break
-    done
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "${SELECTED}"
-}
-# now load the projects
-[ ${#VDM_MOUNT_PROJECTS} -ge 1 ] || {
-  echo "[enter] q to quit selecting"
-  # get the projects to mount
-  VDM_MOUNT_PROJECTS=$(getMountingProjects)
-  # get the mounting options
-  [ ${#VDM_MOUNT_PROJECTS} -ge 1 ] || exit 1
-}
-
-# all values loaded notice
-echo "[All value loaded]"
-
-# build function
-function buildContainer() {
-  # get the projects to mount
-  local mount_projects="$1"
-  # we build the yml file
-  # we use 33 as this is the www-data ID
-  cat <<EOF
-version: "2.1"
-services:
-  openssh-server-${VDM_KEY}:
-    image: lscr.io/linuxserver/openssh-server
-    container_name: openssh-server-${VDM_KEY}
-    restart: unless-stopped
-    hostname: ${VDM_DOMAIN:-vdm.dev}
-    environment:
-      - PUID=${VDM_PUID:-33}
-      - PGID=${VDM_PGID:-33}
-      - TZ=${VDM_TZ:-Africa/Windhoek}
-      - PUBLIC_KEY_DIR=/config/ssh_public_keys
-      - SUDO_ACCESS=${VDM_SUDO_ACCESS:-false}
-      - USER_NAME=${VDM_USER_NAME:-ubuntu}
-    volumes:${mount_projects}
-    ports:
-      - ${VDM_PORT}:2222
-    networks:
-      - openssh
-
-networks:
-  openssh:
-    external:
-      name: openssh_gateway
-EOF
-}
-
-# create the directory if it does not yet already exist
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_USER_NAME:-ubuntu}.${VDM_DOMAIN:-vdm.dev}"
-# place this docker composer file in its place
-buildContainer "${VDM_MOUNT_PROJECTS}" >"${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_USER_NAME:-ubuntu}.${VDM_DOMAIN:-vdm.dev}/docker-compose.yml"
-# set permissions
-chmod 600 "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/available/${VDM_USER_NAME:-ubuntu}.${VDM_DOMAIN:-vdm.dev}/docker-compose.yml"
-# saved the file
-echo "[save] ${VDM_CONTAINER_TYPE}:docker-compose.yml"
-# some house cleaning
-PS3_old=$PS3
-# ask if we should right now enable the container
-echo "[question] Would you like to enable this new ${VDM_CONTAINER_TYPE} container?"
-# set the terminal
-export PS3="[select]: "
-# shellcheck disable=SC1090
-select yn in "Yes" "No"; do
-  case $yn in
-      Yes ) source "${VDM_SRC_PATH}/enable.sh" "${VDM_USER_NAME:-ubuntu}.${VDM_DOMAIN:-vdm.dev}";;
-  esac
-  break
-done
-# restore the default
-export PS3=$PS3_old
-echo "[setup] Completed!"

src/setup-portainer.sh

@@ -1,119 +0,0 @@
-#!/bin/bash
-
-# check that our source path is correct
-[ -e "${VDM_SRC_PATH}" ] || {
-  echo "[error] Source path (${VDM_SRC_PATH}) does not exist."
-  exit 1
-}
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "[error] Repository path (${VDM_REPO_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-# be sure to create the container type path for traefik (just one container really)
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/traefik"
-
-# check if we have global env file
-[ -f "${VDM_REPO_PATH}/portainer/.env" ] && source "${VDM_REPO_PATH}/portainer/.env"
-
-# set the local values
-REMOVE_SECURE=''
-ENTRY_POINT="websecure"
-# check that we have what we need
-if [ "${VDM_SECURE,,}" != 'y' ] && [ "${VDM_SECURE,,}" != 'n' ]; then
-  echo -n "[enter] Use letsencrypt (y/n): "
-  read -r VDM_SECURE
-  # make sure value was entered
-  if [ "${VDM_SECURE,,}" != 'y' ] && [ "${VDM_SECURE,,}" != 'n' ]; then
-    echo "[error] you must choose y or n"
-    exit 1
-  fi
-fi
-# get the domain if not set
-[ ${#VDM_DOMAIN} -ge 1 ] || {
-  echo -n "[enter:localhost] Domain: "
-  read -r VDM_DOMAIN
-  # make sure value was entered
-  [ ${#VDM_DOMAIN} -ge 1 ] || exit
-  # we add the domain to the env (may have the VDM_DOMAIN value, but not the same domain)
-  grep -q "VDM_DOMAIN=\"${VDM_DOMAIN}\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_DOMAIN=\"${VDM_DOMAIN}\"" >>"${VDM_SRC_PATH}/.env"
-}
-# setup letsencrypt stuff
-if [ "${VDM_SECURE,,}" == 'y' ]; then
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"y\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"y\"" >>"${VDM_SRC_PATH}/.env"
-else
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"n\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"n\"" >>"${VDM_SRC_PATH}/.env"
-  # remove secure from build
-  REMOVE_SECURE="#"
-  ENTRY_POINT="web"
-fi
-
-# build function
-function buildContainer() {
-  # we build the yml file
-  cat <<EOF
-version: "3.3"
-
-services:
-  portainer:
-    image: portainer/portainer-ce:latest
-    container_name: portainer
-    command: -H unix:///var/run/docker.sock
-    restart: always
-    volumes:
-      - /var/run/docker.sock:/var/run/docker.sock
-      - portainer_data:/data
-    labels:
-      # Frontend
-      - "traefik.enable=true"
-      - "traefik.http.routers.portainer.rule=Host(\`port.${VDM_DOMAIN}\`)"
-      - "traefik.http.routers.portainer.entrypoints=${ENTRY_POINT}"
-${REMOVE_SECURE}      - "traefik.http.routers.portainer.tls.certresolver=vdmresolver"
-      - "traefik.http.routers.portainer.service=portainer"
-      - "traefik.http.services.portainer.loadbalancer.server.port=9000"
-
-      # Edge
-#      - "traefik.http.routers.portaineredge.rule=Host(\`edge.${VDM_DOMAIN}\`)"
-#      - "traefik.http.routers.portaineredge.entrypoints=${ENTRY_POINT}"
-#      - "traefik.http.routers.portaineredge.tls.certresolver=vdmresolver"
-#      - "traefik.http.routers.portaineredge.service=portaineredge"
-#      - "traefik.http.services.portaineredge.loadbalancer.server.port=8000"
-    networks:
-      - traefik
-
-volumes:
-  portainer_data:
-
-networks:
-  traefik:
-    external:
-      name: traefik_webgateway
-EOF
-}
-
-# set host file if needed
-source "${VDM_SRC_PATH}/host.sh" "port"
-
-## create the directory if it does not yet already exist
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/portainer"
-## place this docker composer file in its place
-buildContainer >"${VDM_REPO_PATH}/portainer/docker-compose.yml"
-## set permissions
-chmod 600 "${VDM_REPO_PATH}/portainer/docker-compose.yml"
-[ -f "${VDM_REPO_PATH}/portainer/.env" ] && chmod 600 "${VDM_REPO_PATH}/portainer/.env" &&
-  ENV_FILE="${VDM_REPO_PATH}/portainer/.env" || ENV_FILE="${VDM_REPO_PATH}/src/.env"
-## saved the file
-echo "[saved] portainer:docker-compose.yml"
-echo "[setup] Completed!"
-
-# now start the container
-docker-compose --env-file "${ENV_FILE}" --file "${VDM_REPO_PATH}/portainer/docker-compose.yml" up -d

src/setup-traefik.sh

@@ -1,140 +0,0 @@
-#!/bin/bash
-
-# check that our source path is correct
-[ -e "${VDM_SRC_PATH}" ] || {
-  echo "[error] Source path (${VDM_SRC_PATH}) does not exist."
-  exit 1
-}
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}" ] || {
-  echo "[error] Repository path (${VDM_REPO_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-# be sure to create the container type path for traefik (just one container really)
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/traefik"
-
-# check if we have global env file
-[ -f "${VDM_REPO_PATH}/traefik/.env" ] && source "${VDM_REPO_PATH}/traefik/.env"
-
-# set the local values
-REMOVE_SECURE=''
-HTTP_SCHEME="https"
-# check that we have what we need
-if [ "${VDM_SECURE,,}" != 'y' ] && [ "${VDM_SECURE,,}" != 'n' ]; then
-  echo -n "[enter] Use letsencrypt (y/n): "
-  read -r VDM_SECURE
-  # make sure value was entered
-  if [ "${VDM_SECURE,,}" != 'y' ] && [ "${VDM_SECURE,,}" != 'n' ]; then
-    echo "[error] you must choose y or n"
-    exit 1
-  fi
-fi
-# get the domain if not set
-[ ${#VDM_DOMAIN} -ge 1 ] || {
-  echo -n "[enter:localhost] Domain: "
-  read -r VDM_DOMAIN
-  # make sure value was entered
-  [ ${#VDM_DOMAIN} -ge 1 ] || exit
-  # we add the domain to the env (may have the VDM_DOMAIN value, but not the same domain)
-  grep -q "VDM_DOMAIN=\"${VDM_DOMAIN}\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_DOMAIN=\"${VDM_DOMAIN}\"" >>"${VDM_SRC_PATH}/.env"
-}
-# setup letsencrypt stuff
-if [ "${VDM_SECURE,,}" == 'y' ]; then
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"y\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"y\"" >>"${VDM_SRC_PATH}/.env"
-  # get the email if not set
-  [ ${#VDM_SECURE_EMAIL} -ge 1 ] || {
-    echo -n "[enter] Email: "
-    read -r VDM_SECURE_EMAIL
-    # make sure value was entered
-    [ ${#VDM_SECURE_EMAIL} -ge 1 ] || exit
-  }
-else
-  # we add this switch to the env values
-  grep -q "VDM_SECURE=\"n\"" "${VDM_SRC_PATH}/.env" || echo "export VDM_SECURE=\"n\"" >>"${VDM_SRC_PATH}/.env"
-  # remove secure from build
-  REMOVE_SECURE="#"
-  HTTP_SCHEME="http"
-fi
-
-# build function
-function buildContainer() {
-  # we build the yml file
-  cat <<EOF
-version: "3.3"
-
-services:
-  traefik:
-    container_name: traefik
-    image: "traefik:latest"
-    command:
-      - --entrypoints.web.address=:80
-      - --entrypoints.websecure.address=:443
-#      - --api.dashboard=true
-#      - --api.insecure=true
-      - --providers.docker
-      - --log.level=INFO
-${REMOVE_SECURE}      - --certificatesresolvers.vdmresolver.acme.httpchallenge=true
-${REMOVE_SECURE}      - --certificatesresolvers.vdmresolver.acme.keytype=RSA4096
-${REMOVE_SECURE}      - --certificatesresolvers.vdmresolver.acme.email=${VDM_SECURE_EMAIL:-user@demo.com}
-${REMOVE_SECURE}      - --certificatesresolvers.vdmresolver.acme.storage=/acme.json
-${REMOVE_SECURE}      - --certificatesresolvers.vdmresolver.acme.httpchallenge.entrypoint=web
-#      - --providers.file.directory=/conf
-#      - --providers.file.watch=true
-    restart: unless-stopped
-    ports:
-      - "80:80"
-      - "443:443"
-#      - "8080:8080"
-    volumes:
-      - /var/run/docker.sock:/var/run/docker.sock
-#      - "\${VDM_PROJECT_PATH}/traefik/conf:/conf"
-${REMOVE_SECURE}      - "\${VDM_PROJECT_PATH}/traefik/acme.json:/acme.json"
-      - "\${VDM_PROJECT_PATH}/traefik/errors:/errors"
-    labels:
-      # settings for all containers
-      - "traefik.http.routers.http-catchall.rule=hostregexp(\`{host:.+}\`)"
-      - "traefik.http.routers.http-catchall.entrypoints=web"
-      - "traefik.http.routers.http-catchall.middlewares=redirect-to-me"
-      - "traefik.http.middlewares.redirect-to-me.redirectscheme.scheme=${HTTP_SCHEME}"
-    networks:
-      - traefik
-
-networks:
-  traefik:
-    external:
-      name: traefik_webgateway
-EOF
-}
-
-## create the directory if it does not yet already exist
-# shellcheck disable=SC2174
-mkdir -p -m 700 "${VDM_REPO_PATH}/traefik"
-## place this docker composer file in its place
-buildContainer >"${VDM_REPO_PATH}/traefik/docker-compose.yml"
-## set permissions
-chmod 600 "${VDM_REPO_PATH}/traefik/docker-compose.yml"
-[ -f "${VDM_REPO_PATH}/traefik/.env" ] && chmod 600 "${VDM_REPO_PATH}/traefik/.env" &&
-  ENV_FILE="${VDM_REPO_PATH}/traefik/.env" || ENV_FILE="${VDM_REPO_PATH}/src/.env"
-## saved the file
-echo "[saved] traefik:docker-compose.yml"
-echo "[setup] Completed!"
-
-# we create the networks
-docker network inspect traefik_webgateway >/dev/null 2>&1 ||
-  docker network create traefik_webgateway
-docker network inspect openssh_gateway >/dev/null 2>&1 ||
-  docker network create openssh_gateway
-# make sure port 80 is not used by apache
-command -v apache2 >/dev/null 2>&1 && [[ $(service apache2 status) == *"active (running)"* ]] && {
-  sudo systemctl stop apache2.service
-  sudo systemctl disable apache2.service
-}
-# now start the container
-docker-compose --env-file "${ENV_FILE}" --file "${VDM_REPO_PATH}/traefik/docker-compose.yml" up -d

src/setup.sh

@@ -1,51 +0,0 @@
-#!/bin/bash
-
-# check that our repository path is correct
-[ -e "${VDM_SRC_PATH}" ] || {
-  echo "[error] Source path (${VDM_SRC_PATH}) does not exist."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# get container type
-function getContainerType() {
-  # some house cleaning
-  PS3_old=$PS3
-  # some defaults
-  export PS3="Please select the kind of container to setup: "
-  # Start our little Menu (only these two for now)
-  select menu in "joomla" "openssh"; do
-    case $REPLY in
-    *)
-      SELECTED="$menu"
-      ;;
-    esac
-    break
-  done
-  # restore the default
-  export PS3=$PS3_old
-  # return selection
-  echo "$SELECTED"
-}
-
-# set the local values
-VDM_CONTAINER_TYPE="${1:-$VDM_CONTAINER_TYPE}"
-# check that we have what we need
-[ ${#VDM_CONTAINER_TYPE} -ge 1 ] || {
-  VDM_CONTAINER_TYPE=$(getContainerType)
-  # make sure value was entered
-  [ ${#VDM_CONTAINER_TYPE} -ge 1 ] || {
-    echo "[error] Wrong container type selected"
-    exit 1
-  }
-}
-
-export VDM_CONTAINER_TYPE
-
-# run that container setup script
-# shellcheck disable=SC1090
-source "${VDM_SRC_PATH}/setup-${VDM_CONTAINER_TYPE}.sh"

src/uninstall.sh

@@ -1,77 +0,0 @@
-#!/bin/bash
-
-# BOT name
-BOT_NAME="docker-deploy v1.0"
-
-# we load global environment values
-# shellcheck disable=SC2015
-[ -f "${VDM_SRC_PATH}/.env" ] && source "${VDM_SRC_PATH}/.env" || {
-  echo "${VDM_SRC_PATH}/.env file not found, please run install."
-  exit 1
-}
-
-# take down all containers
-# shellcheck disable=SC1090
-# ----------------------------------------------------- MULTI CONTAINERS
-# check if we have possible joomla containers
-if [ -e "${VDM_REPO_PATH}/joomla/enabled" ]; then
-  echo -n "[enter:y] Take down Joomla containers [y/n]: "
-  read -r VDM_DOWN_JOOMLA
-  # set the default if empty
-  VDM_DOWN_JOOMLA="${VDM_DOWN_JOOMLA:-y}"
-  # make sure it exist
-  if [ "${VDM_DOWN_JOOMLA,,}" != 'n' ]; then
-    export VDM_CONTAINER_TYPE="joomla"
-    source "${VDM_SRC_PATH}/down.sh"
-  fi
-  # remove all enabled
-  rm -fr "${VDM_REPO_PATH}/joomla/enabled"
-fi
-# check if we have possible openssh containers
-if [ -e "${VDM_REPO_PATH}/openssh/enabled" ]; then
-  echo -n "[enter:y] Take down Openssh containers [y/n]: "
-  read -r VDM_DOWN_OPENSSH
-  # set the default if empty
-  VDM_DOWN_OPENSSH="${VDM_DOWN_OPENSSH:-y}"
-  # make sure it exist
-  if [ "${VDM_DOWN_OPENSSH,,}" != 'n' ]; then
-    export VDM_CONTAINER_TYPE="openssh"
-    source "${VDM_SRC_PATH}/down.sh"
-  fi
-  # remove all enabled
-  rm -fr "${VDM_REPO_PATH}/openssh/enabled"
-fi
-# ----------------------------------------------------- SINGLE CONTAINER
-# check if we have possible portainer container
-if [ -f "${VDM_REPO_PATH}/portainer/docker-compose.yml" ]; then
-  echo -n "[enter:y] Take down Portainer container [y/n]: "
-  read -r VDM_DOWN_PORTAINER
-  # set the default if empty
-  VDM_DOWN_PORTAINER="${VDM_DOWN_PORTAINER:-y}"
-  # make sure it exist
-  if [ "${VDM_DOWN_PORTAINER,,}" != 'n' ]; then
-    docker-compose --file "${VDM_REPO_PATH}/portainer/docker-compose.yml" down
-  fi
-  # we just have one yml file here (so dont remove it for now)
-  # rm -fr "${VDM_REPO_PATH}/portainer"
-fi
-# check if we have possible traefik container
-if [ -f "${VDM_REPO_PATH}/traefik/docker-compose.yml" ]; then
-  echo -n "[enter:y] Take down Traefik container [y/n]: "
-  read -r VDM_DOWN_TRAEFIK
-  # set the default if empty
-  VDM_DOWN_TRAEFIK="${VDM_DOWN_TRAEFIK:-y}"
-  # make sure it exist
-  if [ "${VDM_DOWN_TRAEFIK,,}" != 'n' ]; then
-    docker-compose --file "${VDM_REPO_PATH}/traefik/docker-compose.yml" down
-  fi
-  # we just have one yml file here (so dont remove it for now)
-  # rm -fr "${VDM_REPO_PATH}/traefik"
-fi
-# ----------------------------------------------------- REMOVE SCRIPT
-# now remove the docker-deploy script
-sudo rm /usr/local/bin/docker-deploy
-
-echo "[notice] ${BOT_NAME} has been uninstalled."
-
-exit 0

src/up.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-
-# check that our repository path is correct
-[ -e "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled" ] || {
-  echo "[error] Repository path (${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled) does not exist, first enable some containers."
-  exit 1
-}
-# check that our projects path is correct
-[ -e "${VDM_PROJECT_PATH}" ] || {
-  echo "[error] Projects path (${VDM_PROJECT_PATH}) does not exist."
-  exit 1
-}
-
-# the main function
-main() {
-  # get all zip files
-  for yml in "${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/enabled/"*/*.yml; do
-    # get the vdm_container value
-    vdm_container="${yml%/docker-compose.yml}"
-    # check if image has its own env file also
-    [ -f "${vdm_container}/.env" ] && ENV_FILE="${vdm_container}/.env" || ENV_FILE="${VDM_REPO_PATH}/${VDM_CONTAINER_TYPE}/.env"
-    docker-compose --env-file "${ENV_FILE}" --file "${yml}" up -d
-  done
-}
-
-# run main
-main