changelog: Correct and slightly polish some unreleased changelog files

changelog/unreleased/issue-1681

@@ -1,9 +1,10 @@
-Bugfix: Make mount not create missing mount point
+Bugfix: Make `mount` not create missing mount point directory
 
-When specifying a non-existent directory as mount point for the mount
+When specifying a non-existent directory as mount point for the `mount`
-command, restic used to create the directory automatically. This has now
+command, restic used to create the specified directory automatically.
-changed such that restic instead gives an error when the directory for the
+
-mount point doesn't exist.
+This has now changed such that restic instead gives an error when the
+specified directory for the mount point does not exist.
 
 https://github.com/restic/restic/issues/1681
 https://github.com/restic/restic/pull/3008

changelog/unreleased/issue-1800

@@ -1,8 +1,8 @@
-Bugfix: Ignore 'no data available' error during backup
+Bugfix: Ignore `no data available` filesystem error during backup
 
-restic failed to backup files on some filesystems, for example certain configurations
+Restic was unable to backup files on some filesystems, for example certain
-of CIFS on Linux, which return a "no data available" error when reading extended
+configurations of CIFS on Linux which return a `no data available` error
-attributes. These errors are now ignored.
+when reading extended attributes. These errors are now ignored.
 
 https://github.com/restic/restic/issues/1800
 https://github.com/restic/restic/pull/3034

changelog/unreleased/issue-2186

@@ -1,8 +1,8 @@
-Enhancement: Allow specifying percentage in check's --read-data-subset
+Enhancement: Allow specifying percentage in `check --read-data-subset`
 
-We've enhanced the command-line option --read-data-subset to also accept a
+We've enhanced the `check` command's `--read-data-subset` option to also accept
-percentage. This will check the given percentage of pack files which are
+a percentage (e.g. `2.5%` or `10%`). This will check the given percentage of
-randomly selected on each run.
+pack files (which are randomly selected on each run).
 
 https://github.com/restic/restic/issues/2186
 https://github.com/restic/restic/pull/3038

changelog/unreleased/issue-2453

@@ -1,9 +1,9 @@
-Enhancement: Improve handling of permanent backend errors
+Enhancement: Report permanent/fatal backend errors earlier
 
 When encountering errors in reading from or writing to storage backends,
 restic retries the failing operation up to nine times (for a total of ten
 attempts). It used to retry all backend operations, but now detects some
-permanent error conditions so it can report fatal errors earlier.
+permanent error conditions so that it can report fatal errors earlier.
 
 Permanent failures include local disks being full, SSH connections
 dropping and permission errors.

changelog/unreleased/issue-2528

@@ -1,20 +1,21 @@
-Enhancement: support Alibaba/Aliyun OSS with S3 backend
+Enhancement: Add Alibaba/Aliyun OSS support in the `s3` backend
 
-We've added a new flag to the s3 backend `s3.bucket-lookup` which can
+A new extended option `s3.bucket-lookup` has been added to support
-be set to these 3 values:
+Alibaba/Aliyun OSS in the `s3` backend. The option can be set to one
+of the following values:
 
-- `auto` - existing behaviour
+- `auto` - Existing behaviour
-- `dns` - use DNS style bucket access
+- `dns` - Use DNS style bucket access
-- `path` - use path style bucket access
+- `path` - Use path style bucket access
 
-To make the s3 backend work with Alibaba/Aliyun OSS you must set
+To make the `s3` backend work with Alibaba/Aliyun OSS you must set
-`s3.bucket-lookup` to `dns` and set the `s3.region` parameter.  For
+`s3.bucket-lookup` to `dns` and set the `s3.region` parameter. For
 example:
 
     restic -o s3.bucket-lookup=dns -o s3.region=oss-eu-west-1 -r s3:https://oss-eu-west-1.aliyuncs.com/bucketname init
 
-Note that s3.region must be set otherwise the minio SDK tries to look
+Note that `s3.region` must be set, otherwise the MinIO SDK tries to
-it up and it seems that Alibaba doesn't support that properly.
+look it up and it seems that Alibaba doesn't support that properly.
 
 https://github.com/restic/restic/issues/2528
 https://github.com/restic/restic/pull/2535

changelog/unreleased/issue-2563

@@ -1,8 +1,9 @@
-Bugfix: Use correct directory owner in fuse mount
+Bugfix: Report the correct owner of directories in FUSE mounts
 
-Restic 0.10.0 changed the fuse mount to always report the current user
+Restic 0.10.0 changed the FUSE mount to always report the current user
-as the owner of directories within the fuse mount, which is incorrect.
+as the owner of directories within the FUSE mount, which is incorrect.
-We have changed this back to use the correct owner of a directory.
+
+This is now changed back to reporting the correct owner of a directory.
 
 https://github.com/restic/restic/issues/2563
 https://github.com/restic/restic/pull/3141

changelog/unreleased/issue-2688

@@ -1,26 +1,30 @@
-Bugfix: Make backup and tag commands separate tags by comma
+Bugfix: Make `backup` and `tag` commands separate tags by comma
 
 Running `restic backup --tag foo,bar` previously created snapshots with one
-single tag containing a comma ("foo,bar") instead of two tags ("foo", "bar").
+single tag containing a comma (`foo,bar`) instead of two tags (`foo`, `bar`).
-Similarly, the `tag` command's --set, --add and --remove options would treat
-"foo,bar" as one tag instead of two tags. This was inconsistent with other
-commands and often unexpected when one intended "foo,bar" to mean two tags.
 
-To be consistent in all commands, restic now interprets "foo,bar" to mean two
+Similarly, the `tag` command's `--set`, `--add` and `--remove` options would
-separate tags ("foo" and "bar") instead of one tag ("foo,bar") everywhere,
+treat `foo,bar` as one tag instead of two tags. This was inconsistent with
+other commands and often unexpected when one intended `foo,bar` to mean two
+tags.
+
+To be consistent in all commands, restic now interprets `foo,bar` to mean two
+separate tags (`foo` and `bar`) instead of one tag (`foo,bar`) everywhere,
 including in the `backup` and `tag` commands.
 
 NOTE: This change might result in unexpected behavior in cases where you use
-the `forget` command and filter on tags like "foo,bar". Snapshots previously
+the `forget` command and filter on tags like `foo,bar`. Snapshots previously
 backed up with `--tag foo,bar` will still not match that filter, but snapshots
 saved from now on will match that filter.
 
-To replace "foo,bar" tags with "foo" and "bar" tags in old snapshots, you can
+To replace `foo,bar` tags with `foo` and `bar` tags in old snapshots, you can
-first generate a list of the relevant snapshots using a command like
+first generate a list of the relevant snapshots using a command like:
-`restic snapshots --json --quiet | jq '.[] | select(contains({tags: ["foo,bar"]})) | .id'`
+
-, and then use `restic tag --set foo --set bar snapshotID [...]` to set the new
+    restic snapshots --json --quiet | jq '.[] | select(contains({tags: ["foo,bar"]})) | .id'
-tags. Please adjust the commands to real tag names and any additional tags,
+
-as well as the list of snapshots to process.
+and then use `restic tag --set foo --set bar snapshotID [...]` to set the new
+tags. Please adjust the commands to include real tag names and any additional
+tags, as well as the list of snapshots to process.
 
 https://github.com/restic/restic/issues/2688
 https://github.com/restic/restic/pull/2690

changelog/unreleased/issue-2706

@@ -3,7 +3,8 @@ Enhancement: Configurable progress reports for non-interactive terminals
 The `backup`, `check` and `prune` commands never printed any progress
 reports on non-interactive terminals. This behavior is now configurable
 using the `RESTIC_PROGRESS_FPS` environment variable. Use for example a
-value of `1` for an update per second or `0.01666` for an update per minute.
+value of `1` for an update every second, or `0.01666` for an update every
+minute.
 
 The `backup` command now also prints the current progress when restic
 receives a `SIGUSR1` signal.

changelog/unreleased/issue-2739

@@ -1,5 +1,5 @@
-Bugfix: Make cat command respect --no-lock
+Bugfix: Make the `cat` command respect the `--no-lock` option
 
-Restic cat would not respect the --no-lock flag, it now does.
+The `cat` command would not respect the `--no-lock` flag. This is now fixed.
 
 https://github.com/restic/restic/issues/2739

changelog/unreleased/issue-2944

@@ -1,12 +1,13 @@
-Enhancement: Backup options --files-from-verbatim and --files-from-raw
+Enhancement: Add `backup` options `--files-from-{verbatim,raw}`
 
-The new backup options `--files-from-verbatim` and `--files-from-raw`
+The new `backup` options `--files-from-verbatim` and `--files-from-raw` read a
-read a list of files to back up from a file. Unlike the existing `--files-from`,
+list of files to back up from a file. Unlike the existing `--files-from`
-these options do not interpret the listed filenames as glob patterns;
+option, these options do not interpret the listed filenames as glob patterns;
-whitespace in filenames is preserved as-is and no pattern expansion is done.
+instead, whitespace in filenames is preserved as-is and no pattern expansion is
+done. Please see the documentation for specifics.
 
-These new options are recommended over `--files-from` when generating the
+These new options are highly recommended over `--files-from`, when using a
-list of files to back up from a script. Please see the documentation for specifics.
+script to generate the list of files to back up.
 
 https://github.com/restic/restic/issues/2944
 https://github.com/restic/restic/issues/3013

changelog/unreleased/issue-3083

@@ -1,8 +1,8 @@
-Enhancement: Allow usage of deprecated S3 ListObjectsV1 API
+Enhancement: Allow usage of deprecated S3 `ListObjects` API
 
 Some S3 API implementations, e.g. Ceph before version 14.2.5, have a broken
-`ListObjectsV2` implementation which cause problems for restic when using their
+`ListObjectsV2` implementation which causes problems for restic when using
-API endpoints. When a broken server implementation is used, restic prints
+their API endpoints. When a broken server implementation is used, restic prints
 errors similar to the following:
 
     List() returned error: Truncated response should have continuation token set
@@ -12,7 +12,7 @@ endpoint by setting the `s3.list-objects-v1` extended option, for instance:
 
     restic -o s3.list-objects-v1=true snapshots
 
-This option may be removed in future versions of restic.
+Please note that this option may be removed in future versions of restic.
 
 https://github.com/restic/restic/issues/3083
 https://github.com/restic/restic/pull/3085

changelog/unreleased/issue-3090

@@ -1,7 +1,10 @@
-Bugfix: --use-fs-snapshot now works on windows/386
+Bugfix: The `--use-fs-snapshot` option now works on windows/386
 
 Restic failed to create VSS snapshots on windows/386 with the following error:
-"GetSnapshotProperties() failed: E_INVALIDARG (0x80070057)". This is fixed now.
+
+    GetSnapshotProperties() failed: E_INVALIDARG (0x80070057)
+
+This is now fixed.
 
 https://github.com/restic/restic/issues/3087
 https://github.com/restic/restic/pull/3090

changelog/unreleased/issue-3095

@@ -1,17 +1,17 @@
 Change: Deleting files on Google Drive now moves them to the trash
 
-When deleting files on Google Drive via an rclone backend, restic used
+When deleting files on Google Drive via the `rclone` backend, restic used to
-to bypass the trash folder and required using the `-o rclone.args`
+bypass the trash folder required that one used the `-o rclone.args` option to
-option to enable the trash folder. This ensured that deleted files in
+enable usage of the trash folder. This ensured that deleted files in Google
-Google Drive were not kept indefinitely in the trash folder. Since
+Drive were not kept indefinitely in the trash folder. However, since Google
-Google Drive's trash retention policy changed to deleting trashed files
+Drive's trash retention policy changed to deleting trashed files after 30 days,
-after 30 days, this is no longer needed.
+this is no longer needed.
 
-Restic now leaves it up to rclone and its configuration to use or not
+Restic now leaves it up to rclone and its configuration to use or not use the
-use the trash folder when deleting files. The default is to use the
+trash folder when deleting files. The default is to use the trash folder, as
-trash folder, as of rclone 1.53.2. To re-enable the restic 0.11 behavior,
+of rclone 1.53.2. To re-enable the restic 0.11 behavior, set the
-set the `RCLONE_DRIVE_USE_TRASH` environment variable or change the
+`RCLONE_DRIVE_USE_TRASH` environment variable or change the rclone
-rclone configuration. See the rclone documentation for details.
+configuration. See the rclone documentation for more details.
 
 https://github.com/restic/restic/issues/3095
 https://github.com/restic/restic/pull/3102

changelog/unreleased/issue-3100

@@ -1,9 +1,9 @@
-Bugfix: Do not require gs bucket permissions when running init 
+Bugfix: Do not require gs bucket permissions when running `init`
 
-Restic used to require bucket level permissions for the gs backend 
+Restic used to require bucket level permissions for the `gs` backend 
 in order to initialize a restic repository.
 
-It now allows a gs service account to initialize a repository if the 
+It now allows a `gs` service account to initialize a repository if the
 bucket does exist and the service account has permissions to write/read
 to that bucket.
 

changelog/unreleased/issue-3147

@@ -1,11 +1,11 @@
-Enhancement: Support further environment variables for swift authentication
+Enhancement: Support additional environment variables for Swift authentication
 
-The swift backend now supports the following additional environment variables
+The `swift` backend now supports the following additional environment variables
-to pass authentication details to restic: `OS_USER_ID`, `OS_USER_DOMAIN_ID`,
+for passing authentication details to restic:
-`OS_PROJECT_DOMAIN_ID` and `OS_TRUST_ID`.
+`OS_USER_ID`, `OS_USER_DOMAIN_ID`, `OS_PROJECT_DOMAIN_ID` and `OS_TRUST_ID`
 
-Depending on the openrc configuration file these might be required when the
+Depending on the `openrc` configuration file these might be required when the
-user and project domains differ.
+user and project domains differ from one another.
 
 https://github.com/restic/restic/issues/3147
 https://github.com/restic/restic/pull/3158

changelog/unreleased/issue-3151

@@ -1,9 +1,9 @@
-Bugfix: Never create invalid snapshots on backup interruption
+Bugfix: Don't create invalid snapshots when `backup` is interrupted
 
-When canceling a backup run in the wrong moment it was possible that
+When canceling a backup run at a certain moment it was possible that
 restic created a snapshot with an invalid "null" tree. This caused
-check and other operations to fail. The backup command now properly
+`check` and other operations to fail. The `backup` command now properly
-handles interruptions and never saves a snapshot in that case.
+handles interruptions and never saves a snapshot when interrupted.
 
 https://github.com/restic/restic/issues/3151
 https://github.com/restic/restic/pull/3164

changelog/unreleased/issue-3166

@@ -1,9 +1,9 @@
-Bugfix: Improve error handling in restore
+Bugfix: Improve error handling in the `restore` command
 
-Restic restore used to not print errors while downloading file contents from
+The `restore` command used to not print errors while downloading file contents
-the repository. restore also incorrectly exited with a zero error code even 
+from the repository. It also incorrectly exited with a zero error code even
-when there were errors during the restore process. Now, a non-zero code is
+when there were errors during the restore process. This has all been fixed and
-returned.
+`restore` now returns with a non-zero exit code when there's an error.
 
 https://github.com/restic/restic/issues/3166
 https://github.com/restic/restic/pull/3207

changelog/unreleased/issue-3232

@@ -1,9 +1,9 @@
-Bugfix: Show correct statistics for overlapping targets
+Bugfix: Correct statistics for overlapping targets
 
 A user reported that restic's statistics and progress information during backup
-is not correctly calculated when the backup targets (files/dirs to save)
+was not correctly calculated when the backup targets (files/dirs to save)
 overlap. For example, consider a directory `foo` which contains (among others)
-a file `foo/bar`. When `restic backup foo foo/bar` is run, restic counted the
+a file `foo/bar`. When `restic backup foo foo/bar` was run, restic counted the
 size of the file `foo/bar` twice, so the completeness percentage as well as the
 number of files was wrong. This is now corrected.
 

changelog/unreleased/issue-909

@@ -1,11 +1,11 @@
-Enhancement: Keep mountpoints as empty directories
+Enhancement: Back up mountpoints as empty directories
 
 When the `--one-file-system` option is specified to `restic backup`, it
 ignores all file systems mounted below one of the target directories. This
-means that when a snapshot is restored, users needed to manually recreate the
+means that when a snapshot is restored, users needed to manually recreate
-mountpoint directories.
+the mountpoint directories.
 
-Restic now keeps mountpoints as empty directories and therefore implements
+Restic now backs up mountpoints as empty directories and therefore implements
 the same approach as `tar`.
 
 https://github.com/restic/restic/issues/909

changelog/unreleased/pr-3250

@@ -1,6 +1,6 @@
-Enhancement: Add more error checks
+Enhancement: Add several more error checks
 
-We've added a lot more error checks in places where errors were ignored before
+We've added a lot more error checks in places where errors were previously
-(as hinted by the static analysis programm `errcheck` via `golangci-lint`).
+ignored (as hinted by the static analysis program `errcheck` via `golangci-lint`).
 
 https://github.com/restic/restic/pull/3250

changelog/unreleased/pull-2718

@@ -1,29 +1,29 @@
-Enhancement: Improve pruning performance and make pruning more customizable
+Enhancement: Improve `prune` performance and make it more customizable
 
 The `prune` command is now much faster. This is especially the case for remote
-repositories or repositories with not much data to remove.
+repositories or repositories with not much data to remove. Also the memory
-Also the memory usage of the `prune` command is now reduced.
+usage of the `prune` command is now reduced.
+
 Restic used to rebuild the index from scratch after pruning. This could lead
-to missing packs in the index in some cases for eventually consistent 
+to missing packs in the index in some cases for eventually consistent backends
-backends, like e.g. AWS S3.
+such as e.g. AWS S3. This behavior is now changed and the index rebuilding
-This behavior is now changed and the index rebuilding uses the information
+uses the information already known by `prune`.
-already known by `prune`.
 
 By default, the `prune` command no longer removes all unused data. This
-behavior can be fine-tuned by new options, like the acceptable amount of unused space or
+behavior can be fine-tuned by new options, like the acceptable amount of
-the maximum size of data to reorganize. For more details, see
+unused space or the maximum size of data to reorganize. For more details,
-https://restic.readthedocs.io/en/stable/060_forget.html
+please see https://restic.readthedocs.io/en/stable/060_forget.html .
 
-Moreover, `prune` now accepts the `--dry-run` option and `forget --dry-run --prune`
+Moreover, `prune` now accepts the `--dry-run` option and also running
-also shows what `prune` would do.
+`forget --dry-run --prune` will show what `prune` would do.
 
-Fixes several open issues, e.g.:
+This enhancement also fixes several open issues, e.g.:
-https://github.com/restic/restic/issues/1140
+- https://github.com/restic/restic/issues/1140
-https://github.com/restic/restic/issues/1599
+- https://github.com/restic/restic/issues/1599
-https://github.com/restic/restic/issues/1985
+- https://github.com/restic/restic/issues/1985
-https://github.com/restic/restic/issues/2112
+- https://github.com/restic/restic/issues/2112
-https://github.com/restic/restic/issues/2227
+- https://github.com/restic/restic/issues/2227
-https://github.com/restic/restic/issues/2305
+- https://github.com/restic/restic/issues/2305
 
 https://github.com/restic/restic/pull/2718
 https://github.com/restic/restic/pull/2842

changelog/unreleased/pull-2823

@@ -1,21 +1,22 @@
-Enhancement: Add option to let backup trust mtime without checking ctime
+Enhancement: Add option to let `backup` trust mtime without checking ctime
 
-The backup command used to require that both ctime and mtime of a file matched
+The `backup` command used to require that both `ctime` and `mtime` of a file
-with a previously backed up version to determine that the file was unchanged.
+matched with a previously backed up version to determine that the file was
-In other words, if either ctime or mtime of the file had changed, it would be
+unchanged. In other words, if either `ctime` or `mtime` of the file had
-considered changed and restic would read the file's content again to back up
+changed, it would be considered changed and restic would read the file's
-the relevant (changed) parts of it.
+content again to back up the relevant (changed) parts of it.
 
-The new option --ignore-ctime makes restic look at mtime only, such that ctime
+The new option `--ignore-ctime` makes restic look at `mtime` only, such that
-changes for a file does not cause restic to read the file's contents again.
+`ctime` changes for a file does not cause restic to read the file's contents
+again.
 
-The check for both ctime and mtime was introduced in restic 0.9.6 to make
+The check for both `ctime` and `mtime` was introduced in restic 0.9.6 to make
-backups more reliable in the face of programs that reset mtime (some Unix
+backups more reliable in the face of programs that reset `mtime` (some Unix
 archivers do that), but it turned out to often be expensive because it made
 restic read file contents even if only the metadata (owner, permissions) of
-a file had changed. The new --ignore-ctime option lets the user restore the
+a file had changed. The new `--ignore-ctime` option lets the user restore the
-0.9.5 behavior when needed. The existing --ignore-inode option already turned
+0.9.5 behavior when needed. The existing `--ignore-inode` option already
-off this behavior, but also removed a different check.
+turned off this behavior, but also removed a different check.
 
 Please note that changes in files' metadata are still recorded, regardless of
 the command line options provided to the backup command.

changelog/unreleased/pull-2941

@@ -1,6 +1,6 @@
-Enhancement: Speed up repacking step of prune command
+Enhancement: Speed up the repacking step of the `prune` command
 
-The repack step of the prune command, which moves still used file parts into
+The repack step of the `prune` command, which moves still used file parts into
 new pack files such that the old ones can be garbage collected later on, now
 processes multiple pack files in parallel. This is especially beneficial for
 high latency backends or when using a fast network connection.

changelog/unreleased/pull-3006

@@ -1,9 +1,11 @@
-Enhancement: Speed up rebuild-index
+Enhancement: Speed up the `rebuild-index` command
 
-We've optimized the command rebuild-index. Now, existing index entries are used
+We've optimized the `rebuild-index` command. Now, existing index entries are used
 to minimize the number of pack files that must be read. This speeds up the index
 rebuild a lot.
-Also the option --read-all-packs was added which implements the previous behavior.
+
+Additionally, the option `--read-all-packs` has been added, implementing the
+previous behavior.
 
 https://github.com/restic/restic/issue/2547
 https://github.com/restic/restic/pull/3006

changelog/unreleased/pull-3014

@@ -1,12 +1,13 @@
 Bugfix: Fix sporadic stream reset between rclone and restic
 
-Sometimes when using restic with the rclone backend, an error message similar to the following is printed:
+Sometimes when using restic with the `rclone` backend, an error message
+similar to the following would be printed:
 
     Didn't finish writing GET request (wrote 0/xxx): http2: stream closed
 
-It was found that this is caused by restic closing the connection to rclone
+It was found that this was caused by restic closing the connection to rclone
-when downloading data too fast. A workaround was added which waits for the end
+to soon when downloading data. A workaround has been added which waits for
-of the download before closing the connection.
+the end of the download before closing the connection.
 
 https://github.com/restic/restic/pull/3014
 https://github.com/rclone/rclone/issues/2598

changelog/unreleased/pull-3048

@@ -1,17 +1,23 @@
-Enhancement: Check now has more checks for consistency of index and pack files
+Enhancement: Add more checks for index and pack files in the `check` command
 
-Restic used to only verify the pack file content when calling `check --read-data` or
+The `check` command run with the `--read-data` or `--read-data-subset` options
-`check --read-data-subset` but did not check if the blobs within the pack are
+used to only verify only the pack file content - it did not check if the blobs
-correctly contained in the index.
+within the pack are correctly contained in the index.
-This check is now added and may give an "Blob ID is not contained in index or position
-is incorrect" error.
-Also a new test is added which compares pack file sizes computed from the index and the
-pack header with the actual file size. This test is able to detect truncated pack files.
 
-If the index is not correct, it can be rebuilt by using the `rebuild-index` command.
+A check for the latter is now in place, which can print the following error:
 
-Having added these tests, `restic check` is now able to detect non-existing blobs which
+    Blob ID is not contained in index or position is incorrect
-are wrongly referenced in the index. This situation could have lead to missing data.
+
+Another test is also added, which compares pack file sizes computed from the
+index and the pack header with the actual file size. This test is able to
+detect truncated pack files.
+
+If the index is not correct, it can be rebuilt by using the `rebuild-index`
+command.
+
+Having added these tests, `restic check` is now able to detect non-existing
+blobs which are wrongly referenced in the index. This situation could have
+lead to missing data.
 
 https://github.com/restic/restic/pull/3048
 https://github.com/restic/restic/pull/3082

changelog/unreleased/pull-3081

@@ -1,8 +1,8 @@
-Enhancement: Add zip format support to dump
+Enhancement: Make the `dump` command support `zip` format
 
 Previously, restic could dump the contents of a whole folder structure only
-in the tar format. The `dump` command now has a new flag to change output
+in the `tar` format. The `dump` command now has a new flag to change output
-format to zip. Just pass `--archive zip` as an option to `restic dump`.
+format to `zip`. Just pass `--archive zip` as an option to `restic dump`.
 
 https://github.com/restic/restic/pull/2433
 https://github.com/restic/restic/pull/3081

changelog/unreleased/pull-3099

@@ -1,6 +1,6 @@
-Enhancement: Reduce memory usage of check command
+Enhancement: Reduce memory usage of `check` command
 
-The check command now requires less memory if it is run without the
+The `check` command now requires less memory if it is run without the
 `--check-unused` option.
 
 https://github.com/restic/restic/pull/3099

changelog/unreleased/pull-3106

@@ -1,10 +1,10 @@
-Enhancement: Parallelize scan of snapshot content in copy and prune
+Enhancement: Parallelize scan of snapshot content in `copy` and `prune`
 
-The copy and the prune commands used to traverse the directories of
+The `copy` and `prune` commands used to traverse the directories of
 snapshots one by one to find used data. This snapshot traversal is
 now parallized which can speed up this step several times.
 
-In addition the check command now reports how many snapshots have
+In addition the `check` command now reports how many snapshots have
 already been processed.
 
 https://github.com/restic/restic/pull/3106

changelog/unreleased/pull-3130

@@ -2,6 +2,7 @@ Enhancement: Parallelize reading of locks and snapshots
 
 Restic used to read snapshots sequentially. For repositories containing
 many snapshots this slowed down commands which have to read all snapshots.
+
 Now the reading of snapshots is parallelized. This speeds up for example
 `prune`, `backup` and other commands that search for snapshots with certain
 properties or which have to find the `latest` snapshot.

changelog/unreleased/pull-3152

@@ -1,8 +1,8 @@
-Bugfix: On Linux `backup` hangs during exit when run as a background job
+Bugfix: Do not hang until foregrounded when completed in background
 
 On Linux, when running in the background restic failed to stop the terminal
 output of the `backup` command after it had completed. This caused restic to
-hang until moved to the foreground. This has been fixed.
+hang until moved to the foreground. This has now been fixed.
 
 https://github.com/restic/restic/pull/3152
 https://forum.restic.net/t/restic-alpine-container-cron-hangs-epoll-pwait/3334

changelog/unreleased/pull-3249

@@ -1,7 +1,7 @@
-Bugfix: Better error handling for gs backend
+Bugfix: Improve error handling in `gs` backend
 
-The gs backend did not notice when the last steep of completing a file upload
+The `gs` backend did not notice when the last step of completing a
-failed. Under rare circumstance, this might be able to cause missing files in
+file upload failed. Under rare circumstances, this could cause
-the backup repository. This has been fixed.
+missing files in the backup repository. This has now been fixed.
 
 https://github.com/restic/restic/pull/3249