Before this change restic would attempt to JSON decode the error
message resulting in confusing `Decode: invalid character 'B' looking
for beginning of value` messages. Afterwards it will return `List
failed, server response: 400 Bad Request (400)`
This commit fixes a bug introduced in
e9ea268847: When an invalid lock is
encountered (e.g. if the file is empty), the code used to ignore that,
but now returns the error.
Now, invalid files are ignored for the normal lock check, and removed
when `restic unlock --remove-all` is run.
Closes #1652
As mentioned in issue [#1560](https://github.com/restic/restic/pull/1560#issuecomment-364689346)
this changes the signature for `backend.Save()`. It now takes a
parameter of interface type `RewindReader`, so that the backend
implementations or our `RetryBackend` middleware can reset the reader to
the beginning and then retry an upload operation.
The `RewindReader` interface also provides a `Length()` method, which is
used in the backend to get the size of the data to be saved. This
removes several ugly hacks we had to do to pull the size back out of the
`io.Reader` passed to `Save()` before. In the `s3` and `rest` backend
this is actively used.
This is a bug fix: Before, when the worker function fn in List() of the
RetryBackend returned an error, the operation is retried with the next
file. This is not consistent with the documentation, the intention was
that when fn returns an error, this is passed on to the caller and the
List() operation is aborted. Only errors happening on the underlying
backend are retried.
The error leads to restic ignoring exclusive locks that are present in
the repo, so it may happen that a new backup is written which references
data that is going to be removed by a concurrently running `prune`
operation.
The bug was reported by a user here:
https://forum.restic.net/t/restic-backup-returns-0-exit-code-when-already-locked/484
This pulls the header reads into a function that works in terms of the
number of records requested. This preserves the existing logic of
initially reading 15 records and then falling back if that fails.
In the event of a header with more than 15 records, it will read all
records, including the already-seen final 15 records.
Before, all backend implementations were required to return an error if
the file that is to be written already exists in the backend. For most
backends, that means making a request (e.g. via HTTP) and returning an
error when the file already exists.
This is not accurate, the file could have been created between the HTTP
request testing for it, and when writing starts. In addition, apart from
the `config` file in the repo, all other file names have pseudo-random
names with a very very low probability of a collision. And even if a
file name is written again, the way the restic repo is structured this
just means that the same content is placed there again. Which is not a
problem, just not very efficient.
So, this commit relaxes the requirement to return an error when the file
in the backend already exists, which allows reducing the number of API
requests and thereby the latency for remote backends.
During the development of #1524 I discovered that the Google Cloud
Storage backend did not yet use the HTTP transport, so things such as
bandwidth limiting did not work. This commit does the necessary magic to
make the GS library use our HTTP transport.
A user discovered[1] that when the backup finishes during the upload of
an intermediate index, the upload is cancelled and the index never fully
saved, but the snapshot is saved and the backup finalizes without an
error. This lead to a situation where a snapshot references data that is
contained in the repo, but not referenced in any index, leading to
strange error messages.
This commit uses a dedicated context to signal the intermediate index
uploading routine to terminate after the last index has been uploaded.
This way, an upload running when the backup finishes is completed before
the routine terminates and the snapshot is saved.
[1] https://forum.restic.net/t/error-loading-tree-check-prune-and-forget-gives-error-b2-backend/406
The logging in these functions double the time they take to execute.
However, it is only really useful on failures, which are better
reported by the calling functions.
benchmark old ns/op new ns/op delta
BenchmarkMasterIndexLookupSingleIndex-6 897 395 -55.96%
BenchmarkMasterIndexLookupMultipleIndex-6 2001 1090 -45.53%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 492 215 -56.30%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 1649 912 -44.69%
benchmark old allocs new allocs delta
BenchmarkMasterIndexLookupSingleIndex-6 9 1 -88.89%
BenchmarkMasterIndexLookupMultipleIndex-6 19 1 -94.74%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 6 0 -100.00%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 16 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkMasterIndexLookupSingleIndex-6 160 96 -40.00%
BenchmarkMasterIndexLookupMultipleIndex-6 240 96 -60.00%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 48 0 -100.00%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 128 0 -100.00%
Index.Has() is a faster then Index.Lookup() for checking if a blob exists
in the index. As the returned data is never used, this avoids a ton
of allocations.
When looking up a blob in the master index, with several
indexes present in the master index, a significant amount of time
is spent generating errors for each failed lookup. However, these
errors are often used to check if a blob is present, but the contents
are not inspected making the overhead of the error not useful.
Instead, change Index.Lookup (and Index.LookupSize) to instead return
a boolean denoting if the blob was found instead of an error. Also change
all the calls to these functions to handle the new function signature.
benchmark old ns/op new ns/op delta
BenchmarkMasterIndexLookupSingleIndex-6 820 897 +9.39%
BenchmarkMasterIndexLookupMultipleIndex-6 12821 2001 -84.39%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 5378 492 -90.85%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 17026 1649 -90.31%
benchmark old allocs new allocs delta
BenchmarkMasterIndexLookupSingleIndex-6 9 9 +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6 59 19 -67.80%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 22 6 -72.73%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 72 16 -77.78%
benchmark old bytes new bytes delta
BenchmarkMasterIndexLookupSingleIndex-6 160 160 +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6 3200 240 -92.50%
BenchmarkMasterIndexLookupSingleIndexUnknown-6 1232 48 -96.10%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6 4272 128 -97.00%
When setting up the index used for benchmarking, use math/rand instead of
crypto/rand since the generated ids don't need to be evenly distributed,
and not be secure against guessing. As such, use a different random id
function (only available during tests) that uses math/rand instead.
Load pack header length and 15 header entries with single backend
request. This eliminates separate header Load() request for most pack
files and significantly improves index.New() performance.
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
This reduces the chance of duplicate blobs, otherwise the tests fail
(make the contents of a blob depend on a pseudo-random number instead of
the size, sizes may be duplicate).
Use result of single repository.List() to find both missing and
orphaned data packs. For 500GB repository this eliminates ~100K
repository.Test() calls and improves check time by >30M in my
environment (~45min before this change and ~7min after).
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
This is a follow-up on fb9729fdb9, which
runs the `ssh` in its own process group and selects that process group
as the foreground group. After the sftp connection is established,
restic switches back to the previous foreground process group.
This allows `ssh` to prompt for the password, but it won't receive
the interrupt signal (SIGINT, ^C) later on, because it is not in the
foreground process group any more, allowing a clean tear down.
When backing up several million files (>14M tested here) with few changes,
a large amount of time is spent failing to find an id in an index and creating
an error to signify this. Since this is checked using the Has method,
which doesn't use this error, this time creating the error is wasted.
Instead, directly check if the given id and type are present in the index.
This also avoids reporting all the packs containing this blob, further
reducing cpu usage.
We added previously a code to fix the issue of chaining
credentials, we do not need this anymore since the
upstream minio-go already has this relevant change.
Before, creating a new repo via REST would use the defaut HTTP client,
which is not a problem unless the server uses HTTPS and a TLS
certificate which isn't signed by a CA in the system's CA store. In this
case, all commands work except the 'init' command, which fails with a
message like "invalid certificate".
chaining failed because chaining provider
was only looking for subsequent credentials
provider after an error. Writer a new
chaining provider which proceeds to fetch
new credentials also under situations where
providers do not return but instead return
no keys at all.
Fixes https://github.com/restic/restic/issues/1422
List().
move comment regarding problematic List() backend api (it's s3's ListObjects
that has a problem, NOT swift's ObjectsWalk).
As per discussion in PR #1399.
This is a fix for the following situation (gh-1188):
List() grabs a semaphore token upon entry, starts a goroutine, and
does not release the token until the routine exits (via a defer).
The goroutine iterates over the results from ListCurrentObjects(),
sending them one at a time to a channel, where they are ultimately
processed by be.Load().
Since be.Load() also needs a token, this will result in deadlock if
b2.connections=1.
This fix changes List() so that the token is only held during the call
to ListCurrentObjects().
