The first one in Create is already a WithStack error. The rest were
referencing code that hasn't existed for quite some time. Note that
errors from Google SDKs tends to start with "google:" or "googleapi:".
Also, use restic/internal/errors.
This removes code that is only used within a backend implementation from
the backend package. The latter now only contains code that also has
external users.
This unified construction removes most backend-specific code from
global.go. The backend registry will also enable integration tests to
use custom backends if necessary.
The SemaphoreBackend now uniformly enforces the limit of concurrent
backend operations. In addition, it unifies the parameter validation.
The List() methods no longer uses a semaphore. Restic already never runs
multiple list operations in parallel.
By managing the semaphore in a wrapper backend, the sections that hold a
semaphore token grow slightly. However, the main bottleneck is IO, so
this shouldn't make much of a difference.
The key insight that enables the SemaphoreBackend is that all of the
complex semaphore handling in `openReader()` still happens within the
original call to `Load()`. Thus, getting and releasing the semaphore
tokens can be refactored to happen directly in `Load()`. This eliminates
the need for wrapping the reader in `openReader()` to release the token.
The Test method was only used in exactly one place, namely when trying
to create a new repository it was used to check whether a config file
already exists.
Use a combination of Stat() and IsNotExist() instead.
The only use cases in the code were in errors.IsFatal, backend/b2,
which needs a workaround, and backend.ParseLayout. The last of these
requires all backends to implement error unwrapping in IsNotExist.
All backends except gs already did that.
... called backend/sema. I resisted the temptation to call the main
type sema.Phore. Also, semaphores are now passed by value to skip a
level of indirection when using them.
This enables the backends to request the calculation of a
backend-specific hash. For the currently supported backends this will
always be MD5. The hash calculation happens as early as possible, for
pack files this is during assembly of the pack file. That way the hash
would even capture corruptions of the temporary pack file on disk.
The error returned when finishing the upload of an object was dropped.
This could cause silent upload failures and thus data loss in certain
cases. When a MD5 hash for the uploaded blob is specified, a wrong
hash/damaged upload would return its error via the Close() whose error
was dropped.
Bugs in the error handling while uploading a file to the backend could
cause incomplete files, e.g. https://github.com/golang/go/issues/42400
which could affect the local backend.
Proactively add sanity checks which will treat an upload as failed if
the reported upload size does not match the actual file size.
a gs service account may only have object permissions on an existing
bucket but no bucket create/get permissions.
these service accounts currently are blocked from initialization a
restic repository because restic can not determine if the bucket exists.
this PR updates the logic to assume the bucket exists when the bucket
attribute request results in a permissions denied error.
this way, restic can still initialize a repository if the service
account does have object permissions
fixes: https://github.com/restic/restic/issues/3100
In the Google Cloud Storage backend, support specifying access tokens
directly, as an alternative to a credentials file. This is useful when
restic is used non-interactively by some other program that is already
authenticated and eliminates the need to store long lived credentials.
The access token is specified in the GOOGLE_ACCESS_TOKEN environment
variable and takes precedence over GOOGLE_APPLICATION_CREDENTIALS.
This change removes the hardcoded Google auth mechanism for the GCS
backend, instead using Google's provided client library to discover and
generate credential material.
Google recommend that client libraries use their common auth mechanism
in order to authorise requests against Google services. Doing so means
you automatically support various types of authentication, from the
standard GOOGLE_APPLICATION_CREDENTIALS environment variable to making
use of Google's metadata API if running within Google Container Engine.
As mentioned in issue [#1560](https://github.com/restic/restic/pull/1560#issuecomment-364689346)
this changes the signature for `backend.Save()`. It now takes a
parameter of interface type `RewindReader`, so that the backend
implementations or our `RetryBackend` middleware can reset the reader to
the beginning and then retry an upload operation.
The `RewindReader` interface also provides a `Length()` method, which is
used in the backend to get the size of the data to be saved. This
removes several ugly hacks we had to do to pull the size back out of the
`io.Reader` passed to `Save()` before. In the `s3` and `rest` backend
this is actively used.
Before, all backend implementations were required to return an error if
the file that is to be written already exists in the backend. For most
backends, that means making a request (e.g. via HTTP) and returning an
error when the file already exists.
This is not accurate, the file could have been created between the HTTP
request testing for it, and when writing starts. In addition, apart from
the `config` file in the repo, all other file names have pseudo-random
names with a very very low probability of a collision. And even if a
file name is written again, the way the restic repo is structured this
just means that the same content is placed there again. Which is not a
problem, just not very efficient.
So, this commit relaxes the requirement to return an error when the file
in the backend already exists, which allows reducing the number of API
requests and thereby the latency for remote backends.
During the development of #1524 I discovered that the Google Cloud
Storage backend did not yet use the HTTP transport, so things such as
bandwidth limiting did not work. This commit does the necessary magic to
make the GS library use our HTTP transport.
By default, the GCS Go packages have an internal "chunk size" of 8MB,
used for blob uploads.
Media().Do() will buffer a full 8MB from the io.Reader (or less if EOF
is reached) then write that full 8MB to the network all at once.
This behavior does not play nicely with --limit-upload, which only
limits the Reader passed to Media. While the long-term average upload
rate will be correctly limited, the actual network bandwidth will be
very spikey.
e.g., if an 8MB/s connection is limited to 1MB/s, Media().Do() will
spend 8s reading from the rate-limited reader (performing no network
requests), then 1s writing to the network at 8MB/s.
This is bad for network connections hurt by full-speed uploads,
particularly when writing 8MB will take several seconds.
Disable resumable uploads entirely by setting the chunk size to zero.
This causes the io.Reader to be passed further down the request stack,
where there is less (but still some) buffering.
My connection is around 1.5MB/s up, with nominal ~15ms ping times to
8.8.8.8.
Without this change, --limit-upload 1024 results in several seconds of
~200ms ping times (uploading), followed by several seconds of ~15ms ping
times (reading from rate-limited reader). A bandwidth monitor reports
this as several seconds of ~1.5MB/s followed by several seconds of
0.0MB/s.
With this change, --limit-upload 1024 results in ~20ms ping times and
the bandwidth monitor reports a constant ~1MB/s.
I've elected to make this change unconditional of --limit-upload because
the resumable uploads shouldn't be providing much benefit anyways, as
restic already uploads mostly small blobs and already has a retry
mechanism.
--limit-download is not affected by this problem, as Get().Download()
returns the real http.Response.Body without any internal buffering.
Updates #1216
If the service account used with restic does not have the
storage.buckets.get permission (in the "Storage Admin" role), Create
cannot use Get to determine if the bucket is accessible.
Rather than always trying to create the bucket on Get error, gracefully
fall back to assuming the bucket is accessible. If it is, restic init
will complete successfully. If it is not, it will fail on a later call.
Here is what init looks like now in different cases.
Service account without "Storage Admin":
Bucket exists and is accessible (this is the case that didn't work
before):
$ ./restic init -r gs:this-bucket-does-exist:/
enter password for new backend:
enter password again:
created restic backend c02e2edb67 at gs:this-bucket-does-exist:/
Please note that knowledge of your password is required to access
the repository. Losing your password means that your data is
irrecoverably lost.
Bucket exists but is not accessible:
$ ./restic init -r gs:this-bucket-does-exist:/
enter password for new backend:
enter password again:
create key in backend at gs:this-bucket-does-exist:/ failed:
service.Objects.Insert: googleapi: Error 403:
my-service-account@myproject.iam.gserviceaccount.com does not have
storage.objects.create access to object this-bucket-exists/keys/0fa714e695c8ecd58cb467cdeb04d36f3b710f883496a90f23cae0315daf0b93., forbidden
Bucket does not exist:
$ ./restic init -r gs:this-bucket-does-not-exist:/
create backend at gs:this-bucket-does-not-exist:/ failed:
service.Buckets.Insert: googleapi: Error 403:
my-service-account@myproject.iam.gserviceaccount.com does not have storage.buckets.create access to bucket this-bucket-does-not-exist., forbidden
Service account with "Storage Admin":
Bucket exists and is accessible: Same
Bucket exists but is not accessible: Same. Previously this would fail
when Create tried to create the bucket. Now it fails when trying to
create the keys.
Bucket does not exist:
$ ./restic init -r gs:this-bucket-does-not-exist:/
enter password for new backend:
enter password again:
created restic backend c3c48b481d at gs:this-bucket-does-not-exist:/
Please note that knowledge of your password is required to access
the repository. Losing your password means that your data is
irrecoverably lost.
In the manual, state which standard roles the service account must
have to work correctly, as well as the specific permissions required,
for creating even more specific custom roles.
