Commit Graph

1093 Commits

Author SHA1 Message Date
rawtaz 1b6e8c888f
Merge pull request #3102 from tofran/remove-rclone-drive-use-tras-default-param
Remove `--drive-use-trash=false` from rclone param
2020-11-17 11:21:20 +01:00
Michael Eischer 1f43cac12d check: Only track data blobs when unused blobs should be reported
This improves the memory usage of check a lot as it now only has to
track tree blobs when run using the default parameters.
2020-11-15 18:43:07 +01:00
Michael Eischer 6da66c15d8 check: Simplify referenced blob tracking
The result is identical as long as the context in not canceled. However,
in that case the result is incomplete anyways.
2020-11-15 18:42:55 +01:00
Michael Eischer 3500f9490c check: Simplify blob status tracking
UnusedBlobs now directly reads the list of existing blobs from the
repository index. This removes the need for the blobStatusExists flag,
which in turn allows converting the blobRefs map into a BlobSet.
2020-11-15 18:42:42 +01:00
Michael Eischer b8c7543a55 check: Merge 'size could not be found' and 'not found in index' errors
By construction these two errors always show up in pairs: 'size could
not be found' is printed when the blob is not found in the repository
index. That blob is also part of the `blobs` array. Later on, check
iterates over that array and checks whether the blob is marked as
existing. Which cannot be the case as that mark is generated by
iterating over the repository index.

The merged warning no longer reports the blob index within a file. That
information could also be derived by printing the affected tree using
`cat` and searching for the blob.
2020-11-15 18:41:50 +01:00
Alexander Neumann 3c0c0c132b
Merge pull request #3006 from aawsome/new-rebuild-index
Reimplement rebuild-index and remove /internal/index
2020-11-15 17:48:43 +01:00
Alexander Neumann 9968220652
Merge pull request #2850 from greatroar/packer-malloc
Decrease allocation rate in internal/pack
2020-11-15 17:19:49 +01:00
greatroar ab2b7d7f9a Decrease allocation rate in internal/pack
internal/repository benchmark results:

name             old time/op    new time/op    delta
PackerManager-8     179ms ± 1%     181ms ± 1%   +0.78%  (p=0.009 n=10+10)

name             old speed      new speed      delta
PackerManager-8   294MB/s ± 1%   292MB/s ± 1%   -0.77%  (p=0.009 n=10+10)

name             old alloc/op   new alloc/op   delta
PackerManager-8    91.3kB ± 0%    72.2kB ± 0%  -20.92%  (p=0.000 n=9+7)

name             old allocs/op  new allocs/op  delta
PackerManager-8     1.38k ± 0%     0.76k ± 0%  -45.20%  (p=0.000 n=10+7)
2020-11-15 16:51:47 +01:00
greatroar 9a8a2cae4c Move pack testing logic to test file 2020-11-15 16:45:49 +01:00
Alexander Weiss 9607cad267 Remove internal/index 2020-11-15 07:05:09 +01:00
Alexander Weiss 30b6a0878a Reimplement rebuild-index 2020-11-15 07:05:09 +01:00
Alexander Weiss 187c8fb259 Parallelize MasterIndex.Save() 2020-11-15 07:05:09 +01:00
Alexander Weiss 1ec628ddf5 Add extraObsolete to MasterIndex.Save 2020-11-15 07:05:09 +01:00
Alexander Weiss 5898cb341f Use CreateIndexFromPacks() in test 2020-11-15 07:05:05 +01:00
Alexander Weiss 43732bb885 Add CreateIndexFromPacks() 2020-11-15 07:04:51 +01:00
greatroar c45f8ee075 Replace restic.statT interface by concrete types
name                old time/op    new time/op    delta
NodeFillUser-8        1.81µs ± 9%    1.50µs ± 5%  -17.07%  (p=0.000 n=19+20)
NodeFromFileInfo-8    1.76µs ± 4%    1.49µs ± 6%  -15.63%  (p=0.000 n=20+19)

name                old alloc/op   new alloc/op   delta
NodeFillUser-8          496B ± 0%      352B ± 0%  -29.03%  (p=0.000 n=20+20)
NodeFromFileInfo-8      496B ± 0%      352B ± 0%  -29.03%  (p=0.000 n=20+20)

name                old allocs/op  new allocs/op  delta
NodeFillUser-8          3.00 ± 0%      2.00 ± 0%  -33.33%  (p=0.000 n=20+20)
NodeFromFileInfo-8      3.00 ± 0%      2.00 ± 0%  -33.33%  (p=0.000 n=20+20)
2020-11-14 23:23:26 +01:00
MichaelEischer 3601a9b6cd
Merge pull request #2690 from SkYNewZ/master
Fix #2688: Handle comma-separated list tags when using backup command
2020-11-14 23:19:42 +01:00
MichaelEischer 333c5a19d4
Merge pull request #3082 from aawsome/check-sizes
Check: check sizes of packs from index and packheader
2020-11-14 22:37:42 +01:00
Quentin Lemaire ae441d3134
fix(backup): Switch tags cobra type to handle comma-separated list 2020-11-14 15:48:56 +00:00
Alexander Weiss 17bb77b1f9 check: Also check blob length and offset 2020-11-14 00:42:49 +01:00
Alexander Weiss 80dcfca191 check: Check sizes computed from index and pack header 2020-11-14 00:42:49 +01:00
tofran 94a154c7ca Remove `--drive-use-trash=false` from rclone param
Google drive trash retention policy changed making this
no longer a good default
a go
Issue #3095
2020-11-13 22:58:48 +00:00
Alexander Neumann 04d1983800
Merge pull request #3090 from fgma/vss-fix-386
vss: fix DeleteSnapshots() and GetSnapshotProperties() on 386
2020-11-13 21:30:34 +01:00
Alexander Neumann 8ad9f88993 helpers: Improve error message 2020-11-12 20:38:31 +01:00
fgma f9223cd827 vss: fix DeleteSnapshots() and GetSnapshotProperties() on 386 2020-11-12 19:31:00 +01:00
rawtaz dfb9326b1b
Merge pull request #3085 from LordGaav/s3-list-objects-v1-flag
Extended option to select V1 API for ListObjects on S3 backend
2020-11-11 20:52:44 +01:00
Alexander Neumann 4a0b7328ec s3: Remove dots for config description 2020-11-11 20:20:35 +01:00
greatroar 63e32c44c0 Improve error reporting from restic diff
Instead of a stacktrace, restic diff 111 222 now reports:

	Fatal: no matching ID found for prefix "111"
2020-11-11 16:40:40 +01:00
Nick Douma 829959390a Provide UseV1 parameter to minio.ListObjectsOptions based on s3.list-objects-v1 2020-11-11 11:54:38 +01:00
Nick Douma ccd55d529d Add s3.list-objects-v1 extended option and default to false 2020-11-11 11:54:36 +01:00
Nick Douma 4ddcc17135 Add support for boolean extended options 2020-11-11 11:54:27 +01:00
MichaelEischer 407843c5f9
Merge pull request #3034 from hoyho/gh_master
bugfix: omit ENOTDATA for extended attributes
2020-11-09 22:38:49 +01:00
MichaelEischer 46d31ab86d
Merge pull request #3058 from greatroar/counter
Replace restic.Progress with new progress.Counter (fixes two race conditions)
2020-11-09 22:19:09 +01:00
Alexander Neumann c986823d3f
Merge pull request #3048 from aawsome/check-pack-index
check: check index for packs that are read
2020-11-09 20:12:32 +01:00
Alexander Weiss 239931578c check: check index for packs that are read 2020-11-09 17:28:14 +01:00
hoyho 9df52327cc bugfix: omit ENOTDATA for extended attributes
Signed-off-by: hoyho <luohaihao@gmail.com>
2020-11-10 00:20:34 +08:00
greatroar 21b787a4d1 Stop Counters where they're constructed and started 2020-11-09 13:03:31 +01:00
greatroar ddca699cd2 Replace restic.Progress with new progress.Counter
This fixes two race conditions while cleaning up the code.
2020-11-09 12:12:35 +01:00
Alexander Neumann 3bf43d7951
Merge pull request #2475 from restic/use-github-actions
Use GitHub Actions for CI
2020-11-08 17:30:12 +01:00
Alexander Neumann 5cf42884c8 Run tests on GitHub Actions 2020-11-08 16:04:57 +01:00
Alexander Weiss 826cfa0533 fix context in archiver tests 2020-11-08 08:24:24 +01:00
Alexander Weiss fef408a8bd Return context error in mem backend 2020-11-08 00:05:53 +01:00
greatroar a2d4209322 Don't recurse in local backend's List if not required
Due to the return if !isFile, the IsDir branch in List was never taken
and subdirectories were traversed recursively.

Also replaced isFile by an IsRegular check, which has been equivalent
since Go 1.12 (golang/go@a2a3dd00c9).
2020-11-07 08:54:13 +01:00
Alexander Weiss fd33030556 Use in-memory index to rebuild index in prune 2020-11-06 20:23:30 +01:00
Alexander Weiss 38cc4393f6 Add Masterindex.Save(); Add Index.Packs() 2020-11-06 20:23:30 +01:00
Alexander Weiss aaf1c44362 Fix #3062 2020-11-05 17:05:42 +01:00
Ivan Andreev ab2790d9de Fix http2 stream reset between restic and rest backends #3014 2020-11-05 15:57:40 +03:00
Nick Craig-Wood 86b5d8ffaa s3: add bucket-lookup parameter to select path or dns style bucket lookup
This is to enable restic working with Alibaba cloud

Fixes #2528
2020-11-05 12:20:10 +01:00
Alexander Neumann ae5302c7a8 Add comment that keepBlobs is modified 2020-11-05 10:33:38 +01:00
Alexander Neumann 866a52ad4e Remove unneeded seek
The file returned from DownloadAndHash() is already seeked to the start
of the file.
2020-11-05 10:31:49 +01:00
Alexander Neumann a4507610a0 Fix typo 2020-11-05 10:31:49 +01:00
Alexander Neumann 7def2d8ea7 Use a non-constant seed 2020-11-05 10:31:49 +01:00
Alexander Neumann ee0112ab3b Clarify message about expected error 2020-11-05 10:31:49 +01:00
Michael Eischer b373f164fe prune: Parallelize repack command 2020-11-05 10:31:49 +01:00
Alexander Neumann 5144141321
Merge pull request #2718 from aawsome/new-cleanup-command
Reimplementation of prune
2020-11-05 10:12:19 +01:00
fgma 916b2d303b
vss: fix potential crash (not reachable in restic) (#3045)
HasSufficientPrivilegesForVSS() now returns an error
2020-11-04 22:14:18 +01:00
Alexander Neumann a06f5c28c0
Merge pull request #3055 from greatroar/cleanup
Don't separately allocate sync.{Mutex,Once} if not necessary
2020-11-04 11:11:21 +01:00
greatroar c2f3eee5af Don't separately allocate sync.{Mutex,Once} if not necessary
Separate allocation of synchronization devices suggests they're shared
between objects, but they're not.
2020-11-04 09:55:43 +01:00
Alexander Weiss b2f5381737 Make realistic forget --prune --dryrun 2020-11-03 16:42:21 +01:00
Alexander Weiss ce7d613749 Add Blob.Handle() 2020-11-03 16:42:21 +01:00
Alexander Weiss 581d90cf91 Make some pack parameters public 2020-11-03 16:42:21 +01:00
Alexander Neumann 9a88fb253b
Merge pull request #3051 from greatroar/sanitize-env
Sanitize environment before starting backend processes (rclone, ssh)
2020-11-02 21:18:57 +01:00
Alexander Neumann f14436953a
Merge pull request #3050 from greatroar/widechars
Fix string truncation in ui/termstatus
2020-11-02 16:58:51 +01:00
greatroar 11fbaaae9a Sanitize environment before starting backend processes (rclone, ssh)
The restic security model includes full trust of the local machine, so
this should not fix any actual security problems, but it's better to be
safe than sorry.

Fixes #2192.
2020-11-02 16:41:23 +01:00
greatroar 3ed84ff0c6 Fix string truncation in ui/termstatus
Fixes #3046.
2020-11-02 12:50:49 +01:00
Alexander Neumann 8e965ed4eb
Merge pull request #3039 from MichaelEischer/tar-proper-dirs
Properly dump directories to tar
2020-11-02 12:30:26 +01:00
Alexander Neumann 5f0fa2129e Improve readability
It's time to use a switch statement.
2020-11-02 11:24:26 +01:00
Alexander Neumann 6509c207f4
Merge pull request #2997 from MichaelEischer/faster-excludes
Speedup exclude/include checking
2020-11-02 11:07:21 +01:00
Alexander Neumann 445b845267
Merge pull request #2978 from MichaelEischer/warn-tree-error
Warn if backup failed to read tree blob
2020-11-02 10:14:12 +01:00
Alexander Neumann 3ff37215df
Merge pull request #2935 from MichaelEischer/upgrade-minio
Upgrade minio SDK to version 7
2020-11-02 09:09:10 +01:00
Sergio Rubio e708628cfd
Remove unused function
Not currently used, and it'd need to be added to the MasterIndex interface first.
2020-10-28 13:24:49 +01:00
MichaelEischer bb4b3481a6
Merge pull request #3031 from greatroar/debug-no-seek
Allow debug logging to pipes and terminals
2020-10-25 17:59:06 +01:00
MichaelEischer ad3a52e6f0
Merge pull request #3026 from greatroar/refactor-ui
internal/ui refactoring
2020-10-25 17:51:39 +01:00
Michael Eischer 8d7d6ad2d5 dump: include username in tar 2020-10-24 22:42:01 +02:00
Michael Eischer fe09e6f865 dump: test proper permissions and directory name 2020-10-24 22:42:01 +02:00
Michael Eischer 1e3c9a2c11 dump: Fix file permission to tar mapping
The file permissions included a go specific directory bit which
accidentially forced the usage of the GNU header format. This leads
to problems with 7zip on Windows or when extended attributes are
used.
2020-10-24 22:42:01 +02:00
Michael Eischer e21dcb0eea dump: Additional ACL tests 2020-10-24 22:41:01 +02:00
MichaelEischer 31b8d7a639
Merge pull request #2274 from fgma/master
Support for Volume Shadow Copy Service (VSS) on windows
2020-10-24 15:43:34 +02:00
fgma 5695f9ebd2 vss: Implement VSS support for Windows
The VSS support works for 32 and 64-bit windows, this includes a check that
the restic version matches the OS architecture as required by VSS. The backup
operation will fail the user has not sufficient permissions to use VSS.

Snapshotting volumes also covers mountpoints but skips UNC paths.
2020-10-24 11:35:57 +02:00
greatroar 63be3704d9 Allow debug logging to pipes and terminals 2020-10-19 22:30:30 +02:00
greatroar 35419de232 Simplify ui.StdioWrapper.Write
Instead of looping to find line breaks, make it look for the last one.
2020-10-17 20:30:46 +02:00
greatroar 863a590a81 Refactor termstatus.Term.{Print,Error} methods 2020-10-17 20:30:46 +02:00
greatroar 7c0b6a82db Remove unused public method ui.linesWriter.Flush 2020-10-17 20:30:24 +02:00
MichaelEischer 96a912b65a
Merge pull request #3025 from aawsome/fix-index-ids
Fix setting of ID in DecodeIndex
2020-10-17 09:54:45 +02:00
Alexander Weiss b44ecde8b0 Fix setting of ID in DecodeIndex 2020-10-17 09:12:58 +02:00
MichaelEischer 39fe1e96fe
Merge pull request #3018 from greatroar/background-check
Fix IsProcessBackground on Linux with stdin redirection
2020-10-16 22:50:19 +02:00
MichaelEischer 4ba237bb93
Merge pull request #3019 from greatroar/refactor-decodeindex
Refactor index decoding
2020-10-15 23:22:33 +02:00
greatroar b27375f5ce defer close(ch) outside repository.RunWorkers 2020-10-14 15:50:16 +02:00
greatroar 720e0ee0c7 if cond { return true }; return false => return cond 2020-10-13 20:56:43 +02:00
greatroar 27db3ec262 Refactor index decoding
Decoding old-format indices no longer requires loading and decrypting
twice.
2020-10-13 20:47:50 +02:00
greatroar f80b07b2c8 Fix IsProcessBackground on Linux with stdin redirection
The previous implementation assumed that stdin was a terminal.
It now checks the terminal's fd.
2020-10-13 13:12:02 +02:00
MichaelEischer 41a45ae908
Merge pull request #3016 from greatroar/uid-gid-lookup
Simplify/optimize cached UID/GID lookups
2020-10-12 23:24:55 +02:00
Alexander Neumann 56883817d8
Merge pull request #2990 from MichaelEischer/fix-goreport-warnings
Fix some goreport warnings
2020-10-12 20:44:56 +02:00
greatroar f0cd16e5ea Cache uint32-typed ids in lookup{Username,Group}
NodeFillUser-8        1.92µs ± 5%    1.75µs ± 3%   -8.89%  (p=0.000 n=10+10)
NodeFromFileInfo-8    1.89µs ± 7%    1.76µs ± 4%   -6.69%  (p=0.001 n=10+10)

name                old alloc/op   new alloc/op   delta
NodeFillUser-8          504B ± 0%      496B ± 0%   -1.59%  (p=0.000 n=10+10)
NodeFromFileInfo-8      504B ± 0%      496B ± 0%   -1.59%  (p=0.000 n=10+10)

name                old allocs/op  new allocs/op  delta
NodeFillUser-8          5.00 ± 0%      3.00 ± 0%  -40.00%  (p=0.000 n=10+10)
NodeFromFileInfo-8      5.00 ± 0%      3.00 ± 0%  -40.00%  (p=0.000 n=10+10)
2020-10-12 15:08:15 +02:00
greatroar a03fe4562e Remove unused error return in lookup{Username,Group} 2020-10-12 14:48:23 +02:00
Alexander Neumann c193cea119 Pass Context to NewRestorer() 2020-10-10 15:24:26 +02:00
Alexander Neumann f0d49ca600
Merge pull request #2933 from MichaelEischer/less-context-todo
Replace most usages of context.TODO()
2020-10-10 15:03:44 +02:00
kitone 6099f81692 Fix #1212 restore code produces inconsistent timestamps/permissions.
Keep track of restored child status so parent and root directory not selected by filter will also restore metadata when traversing tree.
2020-10-10 13:46:44 +02:00
kitone 9d7f616190 Improve restorer debug log information 2020-10-10 13:46:43 +02:00
kitone 295ddb9e57 Add test case for inconsistent timestamps and permissions restoration
Reproduce from https://github.com/restic/restic/issues/1212
2020-10-10 13:46:43 +02:00
Michael Eischer e638b46a13 Embed context into ReaderAt
The io.Reader interface does not support contexts, such that it is
necessary to embed the context into the backendReaderAt struct. This has
the problem that a reader might suddenly stop working when it's
contained context is canceled. However, this is now problem here as the
reader instances never escape the calling function.
2020-10-09 22:39:07 +02:00
Michael Eischer d6cfe857b7 pass proper context into MasterIndex.RebuildIndex 2020-10-09 22:39:07 +02:00
Michael Eischer 37a5e2d681 rest: use global context on repository creation 2020-10-09 22:39:06 +02:00
Michael Eischer 4b0fcaed45 unlock: use proper context for locks cleanup
The list operation used by RemoveStaleLocks or RemoveAllLocks will
already be canceled by the passed in context. Therefore we can also just
cancel the remove operation as the unlock command won't process all lock
files anyways.
2020-10-09 22:37:56 +02:00
Michael Eischer 645a6efaf2 restorer: remove redundant type specification 2020-10-09 22:37:56 +02:00
Michael Eischer a449450021 init: pass proper context to master key generation
This is no change in behavior as a canceled context did later on cause
the config file creation to fail. Therefore this change just lets the
repository initialization fail a bit earlier.
2020-10-09 22:37:56 +02:00
Michael Eischer 603bb0e309 restore: Use proper context while loading snapshot 2020-10-09 22:37:56 +02:00
Michael Eischer c458e114d4 pass context to Find / FindSnapshot
This allows proper interruption of restic while it searches for
snapshots or key files.
2020-10-09 22:37:56 +02:00
Michael Eischer 45e9a55c62 Wire context into backend layout detection 2020-10-09 22:37:24 +02:00
Michael Eischer 307a6ba3a3 Upgrade minio sdk to v7
This changes are primarily straightforward modifications to pass the
parameters in the now expected way.
2020-10-09 22:37:24 +02:00
Michael Eischer 50da20d93d Warn if backup failed to read tree blob 2020-10-09 22:36:27 +02:00
Alexander Neumann 5fd3dbccb7
Merge pull request #2963 from MichaelEischer/fix-status-deadlock
backup: Fix possible deadlock of scanner goroutine
2020-10-09 21:35:50 +02:00
Alexander Neumann 35655a481b
Merge pull request #2931 from MichaelEischer/reduce-debug-overhead
Reduce debug log overhead
2020-10-09 21:35:11 +02:00
Alexander Neumann 30cb553c8d
Merge pull request #2932 from MichaelEischer/proper-rclone-create
Call rclone.Create to create a new repository for the rclone backend
2020-10-09 21:29:15 +02:00
MichaelEischer 356ac404cd
Merge pull request #2996 from greatroar/setconsolecursorposition
Use windows.SetConsoleCursorPosition in ui/termstatus
2020-10-09 18:19:02 +02:00
Michael Eischer 88c8e903d2 filter: Fix glob matching on absolute path marker on windows
A pattern part containing "/" is used to mark a path or a pattern as
absolute. However, on Windows the path separator is "\" such that glob
patterns like "?" could match the marker. The code now explicitly skips
the marker when the pattern does not represent an absolute path.
2020-10-09 16:11:05 +02:00
greatroar 740758a5fa Optimize filter pattern matching
By replacing "**" with "", checking for this special path component can
be reduced to a length-zero check.

name                          old time/op    new time/op    delta
FilterLines-8                   44.7ms ± 5%    44.9ms ± 5%     ~     (p=0.631 n=10+10)
FilterPatterns/Relative-8       13.6ms ± 4%    13.4ms ± 5%     ~     (p=0.165 n=10+10)
FilterPatterns/Absolute-8       10.9ms ± 5%    10.7ms ± 4%     ~     (p=0.052 n=10+10)
FilterPatterns/Wildcard-8       53.7ms ± 5%    50.4ms ± 5%   -6.00%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-8     128ms ± 2%      95ms ± 1%  -25.54%  (p=0.000 n=10+10)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-8       3.57MB ± 0%    3.57MB ± 0%     ~     (p=1.000 n=9+8)
FilterPatterns/Absolute-8       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.903 n=9+8)
FilterPatterns/Wildcard-8       19.7MB ± 0%    19.7MB ± 0%   -0.00%  (p=0.022 n=10+9)
FilterPatterns/ManyNoMatch-8    3.57MB ± 0%    3.57MB ± 0%     ~     (all equal)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-8        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Absolute-8        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Wildcard-8        88.7k ± 0%     88.7k ± 0%     ~     (all equal)
FilterPatterns/ManyNoMatch-8     22.2k ± 0%     22.2k ± 0%     ~     (all equal)
2020-10-09 15:51:14 +02:00
MichaelEischer 862ee4b2c9
Merge pull request #2970 from labkode/fopenskip
Skip fopen for file change check to avoid network penalty
2020-10-09 11:43:54 +02:00
Hugo Gonzalez Labrador 958dc6aafc Skip fopen for file change check to avoid network penalty 2020-10-09 10:53:28 +02:00
MichaelEischer 88cc444779
Merge pull request #2934 from MichaelEischer/upgrade-backoff
Upgrade github.com/cenkalti/backoff module
2020-10-08 20:33:30 +02:00
Michael Eischer b79f18209f Upgrade github.com/cenkalti/backoff module
We now use v4 of the module. `backoff.WithMaxRetries` no longer repeats
an operation endlessly when a retry count of 0 is specified. This
required a few fixes for the tests.
2020-10-07 22:04:59 +02:00
Michael Eischer 8388e67c4b filter: cleanup path separator conversion 2020-10-07 21:14:07 +02:00
Michael Eischer 0acc3c5923 filter: special case patterns without globbing characters
In case a part of a path is a simple string, we can just check for
equality without complex parsing in filepath.Match.

name                          old time/op    new time/op    delta
FilterLines-4                   34.8ms ±17%    41.2ms ±23%  +18.36%  (p=0.000 n=10+10)
FilterPatterns/Relative-4       21.7ms ± 6%    12.1ms ±23%  -44.46%  (p=0.000 n=10+10)
FilterPatterns/Absolute-4       10.0ms ± 5%     9.1ms ±11%   -9.80%  (p=0.006 n=10+9)
FilterPatterns/Wildcard-4       47.0ms ± 7%    42.2ms ± 5%  -10.19%  (p=0.000 n=9+10)
FilterPatterns/ManyNoMatch-4     190ms ± 1%     131ms ±20%  -31.47%  (p=0.000 n=8+10)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.870 n=9+9)
FilterPatterns/Absolute-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.145 n=10+10)
FilterPatterns/Wildcard-4       14.3MB ± 0%    19.7MB ± 0%  +37.91%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4    3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.421 n=10+9)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Absolute-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Wildcard-4        88.7k ± 0%     88.7k ± 0%     ~     (all equal)
FilterPatterns/ManyNoMatch-4     22.2k ± 0%     22.2k ± 0%     ~     (all equal)
2020-10-07 20:55:43 +02:00
Michael Eischer 54a124de3b filter: explicitly test separate ListWithChild function 2020-10-07 20:47:52 +02:00
Michael Eischer bcc3bddcf4 filter: only check whether a child path could match when necessary
When checking excludes there is no need to test whether a child path
could also match the pattern, as it is by definition excluded.
Previously childMayMatch was calculated but then discarded. For simple
absolute paths this can account for half the time spent for checking
pattern matches.

name                          old time/op    new time/op    delta
FilterPatterns/Relative-4       23.3ms ± 9%    21.7ms ± 6%   -6.68%  (p=0.004 n=10+10)
FilterPatterns/Absolute-4       13.9ms ± 7%    10.0ms ± 5%  -27.61%  (p=0.000 n=10+10)
FilterPatterns/Wildcard-4       51.4ms ± 7%    47.0ms ± 7%   -8.51%  (p=0.001 n=9+9)
FilterPatterns/ManyNoMatch-4     551ms ± 9%     190ms ± 1%  -65.41%  (p=0.000 n=10+8)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.665 n=10+9)
FilterPatterns/Absolute-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.480 n=9+10)
FilterPatterns/Wildcard-4       14.3MB ± 0%    14.3MB ± 0%     ~     (p=0.431 n=9+10)
FilterPatterns/ManyNoMatch-4    3.57MB ± 0%    3.57MB ± 0%     ~     (all equal)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Absolute-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Wildcard-4        88.7k ± 0%     88.7k ± 0%     ~     (all equal)
FilterPatterns/ManyNoMatch-4     22.2k ± 0%     22.2k ± 0%     ~     (all equal)
2020-10-07 20:47:52 +02:00
Michael Eischer 17c53efb0d filter: Optimize double wildcard expansion
This only allocates a single slice to expand the double wildcard and
only copies the pattern prefix once.

name                          old time/op    new time/op    delta
FilterPatterns/Relative-4       22.7ms ± 5%    23.3ms ± 9%     ~     (p=0.353 n=10+10)
FilterPatterns/Absolute-4       14.2ms ±13%    13.9ms ± 7%     ~     (p=0.853 n=10+10)
FilterPatterns/Wildcard-4        266ms ±16%      51ms ± 7%  -80.67%  (p=0.000 n=10+9)
FilterPatterns/ManyNoMatch-4     554ms ± 6%     551ms ± 9%     ~     (p=0.436 n=10+10)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.349 n=10+10)
FilterPatterns/Absolute-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.073 n=10+9)
FilterPatterns/Wildcard-4        141MB ± 0%      14MB ± 0%  -89.89%  (p=0.000 n=10+9)
FilterPatterns/ManyNoMatch-4    3.57MB ± 0%    3.57MB ± 0%     ~     (all equal)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Absolute-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Wildcard-4        1.63M ± 0%     0.09M ± 0%  -94.56%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4     22.2k ± 0%     22.2k ± 0%     ~     (all equal)
2020-10-07 20:47:48 +02:00
Michael Eischer 7959796269 filter: Special case for absolute paths
name                          old time/op    new time/op    delta
FilterPatterns/Relative-4       23.6ms ±20%    22.7ms ± 5%     ~     (p=0.684 n=10+10)
FilterPatterns/Absolute-4       32.3ms ± 8%    14.2ms ±13%  -56.01%  (p=0.000 n=10+10)
FilterPatterns/Wildcard-4        334ms ±17%     266ms ±16%  -20.56%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4     709ms ± 7%     554ms ± 6%  -21.89%  (p=0.000 n=10+10)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       3.57MB ± 0%    3.57MB ± 0%   +0.00%  (p=0.046 n=9+10)
FilterPatterns/Absolute-4       3.57MB ± 0%    3.57MB ± 0%     ~     (p=0.464 n=10+10)
FilterPatterns/Wildcard-4        141MB ± 0%     141MB ± 0%     ~     (p=0.163 n=9+10)
FilterPatterns/ManyNoMatch-4    3.57MB ± 0%    3.57MB ± 0%     ~     (all equal)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Absolute-4        22.2k ± 0%     22.2k ± 0%     ~     (all equal)
FilterPatterns/Wildcard-4        1.63M ± 0%     1.63M ± 0%     ~     (p=0.072 n=10+10)
FilterPatterns/ManyNoMatch-4     22.2k ± 0%     22.2k ± 0%     ~     (all equal)
2020-10-07 20:47:29 +02:00
Michael Eischer 375c2a56de filter: Parse filter patterns only once
name                          old time/op    new time/op    delta
FilterPatterns/Relative-4       30.3ms ±10%    23.6ms ±20%  -22.12%  (p=0.000 n=10+10)
FilterPatterns/Absolute-4       49.0ms ± 3%    32.3ms ± 8%  -33.94%  (p=0.000 n=8+10)
FilterPatterns/Wildcard-4        345ms ± 9%     334ms ±17%     ~     (p=0.315 n=10+10)
FilterPatterns/ManyNoMatch-4     3.93s ± 2%     0.71s ± 7%  -81.98%  (p=0.000 n=9+10)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       4.63MB ± 0%    3.57MB ± 0%  -22.98%  (p=0.000 n=9+9)
FilterPatterns/Absolute-4       8.54MB ± 0%    3.57MB ± 0%  -58.20%  (p=0.000 n=10+10)
FilterPatterns/Wildcard-4        146MB ± 0%     141MB ± 0%   -2.93%  (p=0.000 n=9+9)
FilterPatterns/ManyNoMatch-4     907MB ± 0%       4MB ± 0%  -99.61%  (p=0.000 n=9+9)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4        66.6k ± 0%     22.2k ± 0%  -66.67%  (p=0.000 n=10+10)
FilterPatterns/Absolute-4        88.7k ± 0%     22.2k ± 0%  -75.00%  (p=0.000 n=10+10)
FilterPatterns/Wildcard-4        1.70M ± 0%     1.63M ± 0%   -3.92%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4     4.46M ± 0%     0.02M ± 0%  -99.50%  (p=0.000 n=10+10)
2020-10-07 20:47:27 +02:00
Michael Eischer b8eacd1364 filter: Reduce redundant path and pattern splitting
A single call to filter.List will split the path only once and also
split each search pattern only once and use it for both match and
childMatch.

name                          old time/op    new time/op    delta
FilterPatterns/Relative-4       62.1ms ±15%    30.3ms ±10%  -51.22%  (p=0.000 n=9+10)
FilterPatterns/Absolute-4        111ms ±10%      49ms ± 3%  -56.08%  (p=0.000 n=10+8)
FilterPatterns/Wildcard-4        393ms ±15%     345ms ± 9%  -12.30%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4     10.0s ± 3%      3.9s ± 2%  -60.53%  (p=0.000 n=10+9)

name                          old alloc/op   new alloc/op   delta
FilterPatterns/Relative-4       16.4MB ± 0%     4.6MB ± 0%  -71.76%  (p=0.000 n=10+9)
FilterPatterns/Absolute-4       31.4MB ± 0%     8.5MB ± 0%  -72.77%  (p=0.000 n=9+10)
FilterPatterns/Wildcard-4        168MB ± 0%     146MB ± 0%  -13.19%  (p=0.000 n=10+9)
FilterPatterns/ManyNoMatch-4    3.23GB ± 0%    0.91GB ± 0%  -71.96%  (p=0.000 n=10+9)

name                          old allocs/op  new allocs/op  delta
FilterPatterns/Relative-4         178k ± 0%       67k ± 0%  -62.50%  (p=0.000 n=10+10)
FilterPatterns/Absolute-4         266k ± 0%       89k ± 0%  -66.67%  (p=0.000 n=10+10)
FilterPatterns/Wildcard-4        1.87M ± 0%     1.70M ± 0%   -9.47%  (p=0.000 n=10+10)
FilterPatterns/ManyNoMatch-4     17.7M ± 0%      4.5M ± 0%  -74.87%  (p=0.000 n=9+10)
2020-10-07 18:13:19 +02:00
Michael Eischer e73c281142 filter: Benchmark absolute paths, wildcards and long filter lists 2020-10-07 17:54:36 +02:00
Michael Eischer fdd3b14db3 filter: test some corner cases 2020-10-07 17:09:44 +02:00
Michael Eischer f4282aa6fd local: mark repository files as read-only
This is intended to prevent accidental modifications of data files.
Marking the files as read-only was accidentally removed in #1258.
2020-10-07 12:29:37 +02:00
Michael Eischer 40ee17167e local: Ignore permission errors on chmod call in Save/Remove operation
The file is already created with the proper permissions, thus the chmod
call is not critical. However, some file systems have don't allow
modifications of the file permissions. Similarly the chmod call in the Remove
operation should not prevent it from working.
2020-10-07 12:29:37 +02:00
greatroar f3e933f0c1 Use windows.SetConsoleCursorPosition in ui/termstatus 2020-10-07 11:18:54 +02:00
MichaelEischer 09d39e260d
Merge pull request #2980 from greatroar/error-wrapping
Remove repetitive error wrapping from internal/cache
2020-10-06 15:19:00 +02:00
Michael Eischer 1579d2a8ec Remove some unused assignments 2020-10-06 14:55:13 +02:00
Michael Eischer eba5dd831f Fix typos reported by misspell 2020-10-06 14:55:13 +02:00
Michael Eischer 9ffb698c8d Modernize context import in internal/fuse
Migrated using `go fix`.
2020-10-06 14:55:13 +02:00
Michael Eischer efbb850d92 Remove a few redundant type specifiers
This is the result of running `gofmt -s -w **/*.go`
2020-10-06 14:55:13 +02:00
greatroar 673dda77c0 Less repetitive error messages in internal/cache
Many instances of errors.Wrap in this package would produce messages
like "Open: open <filename>: no such file or directory"; those now omit
the first "Open:" (or "Stat:", or "MkdirAll"). The function readVersion
now appends its own name to the error message, rather than the function
that failed, to make it easier to spot. Other function names (e.g.,
Load) are already added further up in the call chain.
2020-10-05 20:28:54 +02:00
MichaelEischer 1a490acd67
Merge pull request #2982 from greatroar/archiver-error-handling
Check error in archiver before calling Select
2020-10-05 19:19:47 +02:00
MichaelEischer c84643c6a9
Merge pull request #2981 from greatroar/mkdircachedir
Simplify cache directory creation
2020-10-05 18:15:23 +02:00
greatroar 1e1a1f3078 Upgrade cespare/xxhash to 2.1.1 2020-10-05 17:25:39 +02:00
greatroar c4e2203e45 Check error in archiver before calling Select
The archiver first called the Select function for a path before checking
whether the Lstat on that path actually worked. The RejectFuncs in
exclude.go worked around this by checking whether they received a nil
os.FileInfo. Checking first is more obvious and requires less code.
2020-10-05 11:11:04 +02:00
greatroar 7d0fa1a686 Simplify cache directory creation 2020-10-05 10:46:45 +02:00
Ingo Gottwald 8b8e230771 Swap deprecated GCS lib with replacement 2020-10-03 18:55:56 +02:00
Ingo Gottwald 00cedd22aa Replace deprecated method in gs backend 2020-10-01 10:02:42 +02:00
Michael Eischer d44df9d00d backup: Always remove the status lines once a backup ends 2020-09-30 23:13:10 +02:00
Michael Eischer 8d0ba55ecd backup: Fix possible deadlock of scanner goroutine
When the backup is interrupted for some reason while the scanner is
still active this could lead to a deadlock. Interruptions are triggered
by canceling the context object used by both the backup progress UI and
the scanner. It is possible that a context is canceled between the
respective check in the scanner and it calling the `ReportTotal` method
of the UI. The latter method sends a message to the UI goroutine.
However, a canceled context will also stop that goroutine, which can
cause the channel send operation to block indefinitely.

This is resolved by adding a `closed` channel which is closed once the
UI goroutine is stopped and serves as an escape hatch for reported UI
updates.

This change covers not just the ReportTotal method but all potentially
affected methods of the progress UI implementation.
2020-09-30 23:13:10 +02:00
MichaelEischer 48d0ab5276
Merge pull request #2959 from restic/keep-text
backup: Correct keep policy text
2020-09-30 17:57:00 +02:00
MichaelEischer fd02407863
Merge pull request #2849 from classmarkets/gcs-access-token
gs: support authentication with access token
2020-09-30 17:42:56 +02:00
Leo R. Lundgren 028c9a5343 backup: Correct keep policy text
Makes the following corrections to the "Applying Policy:" output:

- keep the last 1 snapshots snapshots => keep 1 latest snapshots
- keep the last 1 snapshots, 3 hourly, 5 yearly snapshots => keep 1 latest, 3 hourly, 5 yearly snapshots
2020-09-28 14:26:53 +02:00
MichaelEischer 14b312f00d
Merge pull request #2658 from creativeprojects/issue-2241
Don't echo authentication passwords (rest backend)
2020-09-22 22:17:53 +02:00
Fred 206cadfab4 Hide password from repository URLs 2020-09-22 22:00:51 +02:00
MichaelEischer 4875f7b659
Merge pull request #2614 from greatroar/simplify-fs
Simplify internal/fs
2020-09-21 22:05:10 +02:00
greatroar 0d65b78168 Simplify os.ModeType|os.ModeCharDevice => os.ModeType
Since Go 1.12, ModeCharDevice is included in ModeType:
golang/go@a2a3dd00c9
2020-09-21 14:21:32 +02:00
greatroar 95ebba85ff Remove stray Printf from internal/fs 2020-09-21 14:21:32 +02:00
greatroar 59b343a9bf Remove OS-specific versions of fs.MkdirAll
Go has supported Windows paths correctly since 1.11, see
https://github.com/golang/go/issues/10900 and the commit referenced
there.
2020-09-21 14:21:32 +02:00
greatroar 1557c58eef Fix and simplify fs.Reader
fakeDir.{Readdir,Readdirnames} weren't handling the case n == 0
correctly. fakeFileInfo.sys is always nil, so omit the field.
2020-09-21 14:21:32 +02:00
greatroar c504aa505c Remove unused fs.Rename 2020-09-21 14:21:32 +02:00
greatroar 1b20f6beec Remove io.Writer from fs.File
It was only used in a single test, which now uses plain *os.File instead.
2020-09-21 14:21:32 +02:00
Michael Eischer 8c36317b71 rclone: use configured number of connections during create 2020-09-19 19:11:43 +02:00
Michael Eischer 60a5c35de9 rclone: close connection to rclone if open fails 2020-09-19 19:11:43 +02:00
Michael Eischer 07f4e7d10b Only log HTTP requests when a debug log is configured
The logged HTTP requests are only visible when a debug log is
configured.
2020-09-19 17:07:53 +02:00
Michael Eischer f003410402 init: Add `--copy-chunker-params` option
This allows creating multiple repositories with identical chunker
parameters which is required for working deduplication when copying
snapshots between different repositories.
2020-09-19 16:53:05 +02:00
Michael Eischer 9ad8250a78 Reduce overhead of debug calls if no log is enabled
In case no debug log is configured, then calls to debug.Log only incur
the costs to check a single boolean flag making the call really cheap.
2020-09-19 16:45:01 +02:00
greatroar cb3f531050 Make Cache.Path private
It's only used inside the package.
2020-09-18 11:17:29 +02:00
greatroar 23fcbb275a Remove restic.Cache interface
It was used in one code path, which then asserted its concrete type as
*cache.Cache.

Privatised some of the interface methods.
2020-09-18 10:48:13 +02:00
greatroar 6e3215a80d Remove unused error type from internal/cache 2020-09-18 10:38:14 +02:00
greatroar 9abef3bf1a Move internal/fs.TestChdir to internal/test.Chdir 2020-09-17 10:43:33 +02:00
Alexander Neumann 0c48e515f0
Merge pull request #2630 from MichaelEischer/fix-staticcheck
Fix lots of small issues reported by staticcheck
2020-09-13 16:19:22 +02:00
Alexander Neumann 97950ab81a options: Fix test for Go >= 1.15 2020-09-12 17:36:44 +02:00
MichaelEischer 88664ba222
Merge pull request #2893 from MichaelEischer/restore-preallocate
restorer: Preallocate files
2020-09-08 22:43:05 +02:00
Michael Eischer 121233e1b3 Add preallocate tests 2020-09-07 21:41:47 +02:00
Michael Eischer 8cc9514879 restorer: pre-allocate files before loading chunks 2020-09-07 21:41:47 +02:00
Michael Eischer 2e7d475029 Process packs in order of first appearance 2020-09-06 21:25:35 +02:00
Michael Eischer c46edcd9d6 error strings should not end with punctuation 2020-09-05 10:07:17 +02:00
Michael Eischer 1ede018ea6 error variable names should start with 'Err' 2020-09-05 10:07:17 +02:00
Michael Eischer b77e933d80 Convert underscore variable names to camelCase 2020-09-05 10:07:16 +02:00
Michael Eischer d0329cf3eb Adjust comments to match name of exported methods 2020-09-05 10:07:16 +02:00
Michael Eischer dc31529fc3 Unindent else block after if block ending with a return statement 2020-09-05 10:07:16 +02:00
Michael Eischer 4784540f04 repository: Simplify worker group code 2020-09-05 10:07:16 +02:00
Michael Eischer 84ea2389ae archiver_test: Only skip symlinks on windows 2020-09-05 10:07:16 +02:00
Michael Eischer b4a7ce86cf uint cannot be less than zero 2020-09-05 10:07:16 +02:00
Michael Eischer 7ee0964880 crypto: Remove unused error 2020-09-05 10:07:16 +02:00
Michael Eischer f6f11400c2 restic: Remove unused variable value 2020-09-05 10:07:16 +02:00
Michael Eischer e2dc5034d3 restic/file: Use FileType for all File constants
The data type of a variable is only carried on when using iota.
2020-09-05 10:07:16 +02:00
Michael Eischer 9a1b3cb5d9 restorer: Remove unused treeID struct member from test 2020-09-05 10:07:16 +02:00
Michael Eischer ee05501ce7 archiver: Remove unused chmod function 2020-09-05 10:07:16 +02:00
Michael Eischer 014600bee6 archiver: Remove unused variable from test 2020-09-05 10:07:16 +02:00
Michael Eischer d9a80e07b9 repository: Simplify index age calculation 2020-09-05 10:07:16 +02:00
Michael Eischer 460e2ffbf6 Collapse a few boolean operations 2020-09-05 10:07:14 +02:00
Michael Eischer 2f8335554c Remove a few unused variables 2020-09-05 10:06:23 +02:00
Michael Eischer 37113282ca Merge a few variable declaration and initializations 2020-09-05 10:05:34 +02:00
Michael Eischer 337725c354 Use sort.Strings 2020-09-05 10:05:34 +02:00
Michael Eischer dcf9ded977 dump: Use slashes as path separators in tar on windows
This conversion is necessary as paths returned by filepath.Rel use the
operating-system native path separator
2020-08-30 18:26:50 +02:00
Simon Beck fe6445e0f4 dump: Added unit tests for tar output 2020-08-30 16:00:48 +02:00
Simon Beck 80a11960dd dump: Always dump relative paths into tarballs
Tarballs should only contain relative paths.
2020-08-29 21:14:34 +02:00
Simon Beck d6f739ec22 dump: Extract tar code to internal/dump 2020-08-29 21:14:34 +02:00
Michael Eischer b25978a53c backup: Fix reporting of directory count in summary
Previously the directory stats were reported immediately after calling
`SaveDir`. However, as the latter method saves the tree asynchronously
the stats were still initialized to their nil value. The stats are now
reported via a callback similar to the one used for the fileSaver.
2020-08-27 22:43:51 +02:00
Alexander Neumann b1b3f1ecb6
Merge pull request #2674 from MichaelEischer/prune-strict-checks
prune: Stricter error checks
2020-08-23 10:30:41 +02:00
Hristo Trendev 51c22f4223 local backend: ignore not supported error on sync()
Closes #2395
2020-08-22 01:27:07 +02:00
Michael Eischer f4b9544ab2 prune: Add test that repack aborts on wrong blob 2020-08-16 11:34:01 +02:00
Michael Eischer 367449dede prune: Reduce memory allocations while repacking
The slicing operator `slice[low:high]` default to 0 for the lower bound and
len(slice) for the upper bound when either or both are not specified.
Fix the code to use `cap(slice)` to check for the slice capacity.
2020-08-16 11:34:01 +02:00
Michael Eischer 7042bafea5 prune: Abort repacking when a pack contains a wrong blob
If a blob in a pack file can be decrypted successfully but contains data
that results in a different hash than stated in the header pack, then
abort repacking. As both the pack header and the blob are
cryptographically verified this either means than a malicious entity
tampered with the backup or indicates hardware problems on the client.
prune should fail with an error in both cases.
2020-08-16 11:34:01 +02:00
aawsome 0fed6a8dfc
Use "pack file" instead of "data file" (#2885)
- changed variable names, especially changed DataFile into PackFile
- changed in some comments
- always use "pack file" in docu
2020-08-16 11:16:38 +02:00
MichaelEischer eca0f0ad24
Merge pull request #2863 from aawsome/index-no-duplicates
Don't save exact duplicates in merged index
2020-08-08 18:24:14 +02:00
Alexander Weiss b112533812 Don't save exact duplicates when merging indexes 2020-08-05 06:32:02 +02:00
Alexander Weiss 5e63294355 Add benchmark MasterIndexAlloc 2020-08-05 06:32:02 +02:00
Michael Eischer 05116e4787 prune: Cleanup progress bar handling while repacking 2020-08-03 19:32:46 +02:00
Alexander Neumann b7b479b668
Merge pull request #2599 from MichaelEischer/tweak-mem-usage
Reduce memory usage when searching for used blobs
2020-08-01 13:49:02 +02:00
Alexander Neumann 4cf9656f12
Merge pull request #2861 from MichaelEischer/fix-rclone-crash
rclone: Don't panic after unexpected subprocess exit
2020-08-01 13:08:50 +02:00
Alexander Neumann 2580eef2aa
Merge pull request #2318 from classmarkets/2175-named-keys
Allow specifying user and host when adding keys
2020-08-01 13:06:31 +02:00
Michael Eischer a178e5628e Remove duplicate TreeLoader interface 2020-08-01 12:29:16 +02:00
Michael Eischer af66a62c04 FindUsedBlobs: Test that seen blobs are skipped
This also copies the TreeLoader interface from internal/walker to allow
stubbing the repository in the call to `FindUsedBlobs`.
2020-08-01 12:29:16 +02:00
Michael Eischer 9ea1a78bd4 FindUsedBlobs: Check for seen blobs before loading trees
The only effective change in behavior is that that toplevel nodes can
also be skipped.
2020-08-01 12:29:16 +02:00
Michael Eischer 184103647a FindUsedBlobs: merge seen into blobs BlobSet
The seen BlobSet always contained a subset of the entries in blobs.
Thus use blobs instead and avoid the memory overhead of the second set.

Suggested-by: Alexander Weiss <alex@weissfam.de>
2020-08-01 12:29:16 +02:00
Michael Eischer c81b122374 rclone: Don't panic after unexpected subprocess exit
As the connection to the rclone child process is now closed after an
unexpected subprocess exit, later requests will cause the http2
transport to try to reestablish a new connection. As previously this never
should have happened, the connection called panic in that case. This
panic is now replaced with a simple error message, as it no longer
indicates an internal problem.
2020-08-01 12:17:40 +02:00
Alexander Weiss f8316948d1 Optimize FUSE - make command `restic mount` faster and consume less memory
- Add Open() functionality to dir
- only access index for blobs when file is read
- Implement NodeOpener and put one-time file stuff there
- Add comment about locking as suggested by bazil.org/fuse

=> Thanks at Michael Eischer for suggesting the last two improvements
2020-07-28 23:01:18 +02:00
Michael Eischer ea97ff1ba4 rclone: Skip crash test when rclone is not found 2020-07-26 12:06:18 +02:00
Michael Eischer 01b9581453 rclone: Better field names for stdio conn 2020-07-26 00:29:25 +02:00
Michael Eischer 3cd927d180 rclone: Give rclone time to finish before closing stdin pipe
Calling `Close()` on the rclone backend sometimes failed during test
execution with 'signal: Broken pipe'. The stdio connection closed both
the stdin and stdout file descriptors at the same moment, therefore
giving rclone no chance to properly send any final http2 data frames.

Now the stdin connection to rclone is closed first and will only be
forcefully closed after a timeout. In case rclone exits before the
timeout then the stdio connection will be closed normally.
2020-07-26 00:29:25 +02:00
greatroar bf7b1f12ea rclone: Add test for pipe handling when rclone exits 2020-07-26 00:29:25 +02:00
Michael Eischer 8554332894 rclone: Close rclone side of stdio_conn pipes
restic did not notice when the rclone subprocess exited unexpectedly.

restic manually created pipes for stdin and stdout and used these for the
connection to the rclone subprocess. The process creating a pipe gets
file descriptors for the sender and receiver side of a pipe and passes
them on to the subprocess. The expected behavior would be that reads or
writes in the parent process fail / return once the child process dies
as a pipe would now just have a reader or writer but not both.

However, this never happened as restic kept the reader and writer
file descriptors of the pipes. `cmd.StdinPipe` and `cmd.StdoutPipe`
close the subprocess side of pipes once the child process was started
and close the parent process side of pipes once wait has finished. We
can't use these functions as we need access to the raw `os.File` so just
replicate that behavior.
2020-07-26 00:29:25 +02:00
greatroar 3e93b36ca4 Make rclone.New private 2020-07-26 00:28:45 +02:00
Michael Eischer c847aace35 Rename Index interface to MasterIndex
The interface is now only implemented by repository.MasterIndex.
2020-07-25 21:19:46 +02:00
Alexander Weiss 9d1fb94c6c make Lookup() return all blobs
+ simplify syntax
2020-07-25 21:18:34 +02:00
MichaelEischer 020cab8e08
Merge pull request #2787 from greatroar/no-blobsize-cache
Remove blob size cache from restic mount
2020-07-25 20:46:35 +02:00
greatroar 07da61baee Remove blob size cache from restic mount 2020-07-25 19:39:14 +02:00
MichaelEischer 3d530dfc91
Merge pull request #2827 from aawsome/archiver-test-contents
Make self-healing work when backing up with parent snapshot
2020-07-25 13:13:18 +02:00
MichaelEischer bbc960f957
Merge pull request #2635 from greatroar/optimize-sortbycached
Optimize sorting blobs by cache status
2020-07-25 12:35:42 +02:00
greatroar 309598c237 Simplify sortCachedPacksFirst test in internal/repository
The test now uses the fact that the sort is stable. It's not guaranteed
to be, but the test is cleaner and more exhaustive. sortCachedPacksFirst
no longer needs a return value.
2020-07-25 12:12:59 +02:00
greatroar 03d23e6faa Speed up blob sorting in internal/repository
name                    old time/op    new time/op    delta
SortCachedPacksFirst-8     208µs ± 3%     186µs ± 3%  -10.74%  (p=0.000 n=10+8)

name                    old alloc/op   new alloc/op   delta
SortCachedPacksFirst-8     213kB ± 0%     139kB ± 0%  -34.62%  (p=0.000 n=10+10)

name                    old allocs/op  new allocs/op  delta
SortCachedPacksFirst-8     1.03k ± 0%     1.03k ± 0%   -0.19%  (p=0.000 n=10+10)
2020-07-25 12:12:59 +02:00
greatroar b10acd2af7 Test and benchmark blob sorting in internal/repository 2020-07-25 12:12:58 +02:00
Alexander Weiss 9175795fdb Check contents in archiver
When backing up with a parent snapshot and the file is not changed, also
check if contents are still available in index.
2020-07-25 08:18:28 +02:00
rawtaz 5d8d70542f
Merge pull request #2852 from MichaelEischer/drop-go-1.11
Drop support for Go version 1.11
2020-07-25 01:17:36 +02:00
Michael Eischer 7c23381a2b Drop support for Go version 1.11 2020-07-24 18:52:39 +02:00
MichaelEischer 34181b13a2
Merge pull request #2328 from MichaelEischer/no-repeated-checks
Fix duplicate tree checks within `restic check`
2020-07-22 22:08:02 +02:00
Alexander Weiss a666a6d576 Add tests and merge indexes in index benchmarks 2020-07-22 21:54:02 +02:00
Alexander Weiss e388d962a5 Merge final indexes together for faster index access 2020-07-22 21:54:02 +02:00
Peter Schultz 758b44b9c0 gs: support authentication with access token
In the Google Cloud Storage backend, support specifying access tokens
directly, as an alternative to a credentials file. This is useful when
restic is used non-interactively by some other program that is already
authenticated and eliminates the need to store long lived credentials.

The access token is specified in the GOOGLE_ACCESS_TOKEN environment
variable and takes precedence over GOOGLE_APPLICATION_CREDENTIALS.
2020-07-22 16:23:03 +02:00
Alexander Weiss 3b7a3711e6 Add more realistic index benchmarks
+ reduce test size of BenchmarkMasterIndexLookupParallel
2020-07-21 07:18:20 +02:00
Michael Eischer 9b0e718852 checker: Test that blob types are not confused 2020-07-20 23:43:47 +02:00
MichaelEischer 82c908871d
Merge pull request #2812 from greatroar/chaining
Chaining hash table for repository.Index
2020-07-20 23:29:36 +02:00
Michael Eischer ddf0b8cd0b checker: Properly distinguish between data and tree blobs
If a data blob and a tree blob with the same ID (= same content) exist,
then the checker did not report a data or tree blob as unused when the
blob of the other type was still in use.
2020-07-20 22:58:39 +02:00
Michael Eischer 2d0c138c9b checker: Test that check only decodes trees once
The `DuplicateTree` flag is necessary to ensure that failures cannot be
swallowed. The old checker implementation ignores errors from LoadTree
if the corresponding tree was already checked.
2020-07-20 22:51:53 +02:00
Michael Eischer ef325ffc02 checker: Cleanup error handling code
This change only moves code around but does not result in any change in
behavior.
2020-07-20 22:51:53 +02:00
Michael Eischer 7a165f32a9 checker: Traverse trees in depth-first order
Backups traverse the file tree in depth-first order and saves trees on
the way back up. This results in tree packs filled in a way comparable
to the reverse Polish notation.  In order to check tree blobs in that
order, the treeFilter would have to delay the forwarding of tree nodes
until all children of it are processed which would complicate the
implementation.

Therefore do the next similar thing and traverse the tree in depth-first
order, but process trees already on the way down. The tree blob ids are
added in reverse order to the backlog, which is once again reverted when
removing the ids from the back of the backlog.
2020-07-20 22:51:53 +02:00
Michael Eischer 36c69e3ca7 checker: Unify blobs, processed trees and referenced blobs map
The blobRefs map and the processedTrees IDSet are merged to reduce the
memory usage. The blobRefs map now uses separate flags to track blob
usage as data or tree blob. This prevents skipping of trees whose
content is identical to an already processed data blob. A third flag
tracks whether a blob exists or not, which removes the need for the
blobs IDSet.
2020-07-20 22:51:47 +02:00
Michael Eischer 35d8413639 checker: Remove dead index map 2020-07-20 22:37:31 +02:00