.. Normally, there are no heading levels assigned to certain characters as the structure is determined from the succession of headings. However, this convention is used in Python’s Style Guide for documenting which you may follow: # with overline, for parts * for chapters = for sections - for subsections ^ for subsubsections " for paragraphs ######################### Working with repositories ######################### Listing all snapshots ===================== Now, you can list all the snapshots stored in the repository: .. code-block:: console $ restic -r /srv/restic-repo snapshots enter password for repository: ID Date Host Tags Directory ---------------------------------------------------------------------- 40dc1520 2015-05-08 21:38:30 kasimir /home/user/work 79766175 2015-05-08 21:40:19 kasimir /home/user/work bdbd3439 2015-05-08 21:45:17 luigi /home/art 590c8fc8 2015-05-08 21:47:38 kazik /srv 9f0bc19e 2015-05-08 21:46:11 luigi /srv You can filter the listing by directory path: .. code-block:: console $ restic -r /srv/restic-repo snapshots --path="/srv" enter password for repository: ID Date Host Tags Directory ---------------------------------------------------------------------- 590c8fc8 2015-05-08 21:47:38 kazik /srv 9f0bc19e 2015-05-08 21:46:11 luigi /srv Or filter by host: .. code-block:: console $ restic -r /srv/restic-repo snapshots --host luigi enter password for repository: ID Date Host Tags Directory ---------------------------------------------------------------------- bdbd3439 2015-05-08 21:45:17 luigi /home/art 9f0bc19e 2015-05-08 21:46:11 luigi /srv Combining filters is also possible. Furthermore you can group the output by the same filters (host, paths, tags): .. code-block:: console $ restic -r /srv/restic-repo snapshots --group-by host enter password for repository: snapshots for (host [kasimir]) ID Date Host Tags Directory ---------------------------------------------------------------------- 40dc1520 2015-05-08 21:38:30 kasimir /home/user/work 79766175 2015-05-08 21:40:19 kasimir /home/user/work 2 snapshots snapshots for (host [luigi]) ID Date Host Tags Directory ---------------------------------------------------------------------- bdbd3439 2015-05-08 21:45:17 luigi /home/art 9f0bc19e 2015-05-08 21:46:11 luigi /srv 2 snapshots snapshots for (host [kazik]) ID Date Host Tags Directory ---------------------------------------------------------------------- 590c8fc8 2015-05-08 21:47:38 kazik /srv 1 snapshots Listing files in a snapshot =========================== To get a list of the files in a specific snapshot you can use the ``ls`` command: .. code-block:: console $ restic ls 073a90db snapshot 073a90db of [/home/user/work.txt] filtered by [] at 2024-01-21 16:51:18.474558607 +0100 CET): /home /home/user /home/user/work.txt The special snapshot ID ``latest`` can be used to list files and directories of the latest snapshot in the repository. The ``--host`` flag can be used in conjunction to select the latest snapshot originating from a certain host only. .. code-block:: console $ restic ls --host kasimir latest snapshot 073a90db of [/home/user/work.txt] filtered by [] at 2024-01-21 16:51:18.474558607 +0100 CET): /home /home/user /home/user/work.txt By default, ``ls`` prints all files in a snapshot. File listings can optionally be filtered by directories. Any positional arguments after the snapshot ID are interpreted as absolute directory paths, and only files inside those directories will be listed. Files in subdirectories are not listed when filtering by directories. If the ``--recursive`` flag is used, then subdirectories are also included. Any directory paths specified must be absolute (starting with a path separator); paths use the forward slash '/' as separator. .. code-block:: console $ restic ls latest /home snapshot 073a90db of [/home/user/work.txt] filtered by [/home] at 2024-01-21 16:51:18.474558607 +0100 CET): /home /home/user .. code-block:: console $ restic ls --recursive latest /home snapshot 073a90db of [/home/user/work.txt] filtered by [/home] at 2024-01-21 16:51:18.474558607 +0100 CET): /home /home/user /home/user/work.txt To show more details about the files in a snapshot, you can use the ``--long`` option. The colums include file permissions, UID, GID, file size, modification time and file path. For scripting usage, the ``ls`` command supports the ``--json`` flag; the JSON output format is described at :ref:`ls json`. .. code-block:: console $ restic ls --long latest snapshot 073a90db of [/home/user/work.txt] filtered by [] at 2024-01-21 16:51:18.474558607 +0100 CET): drwxr-xr-x 0 0 0 2024-01-21 16:50:52 /home drwxr-xr-x 0 0 0 2024-01-21 16:51:03 /home/user -rw-r--r-- 0 0 18 2024-01-21 16:51:03 /home/user/work.txt NCDU (NCurses Disk Usage) is a tool to analyse disk usage of directories. The ``ls`` command supports outputting information about a snapshot in the NCDU format using the ``--ncdu`` option. You can use it as follows: ``restic ls latest --ncdu | ncdu -f -`` Copying snapshots between repositories ====================================== In case you want to transfer snapshots between two repositories, for example from a local to a remote repository, you can use the ``copy`` command: .. code-block:: console $ restic -r /srv/restic-repo-copy copy --from-repo /srv/restic-repo repository d6504c63 opened successfully, password is correct repository 3dd0878c opened successfully, password is correct snapshot 410b18a2 of [/home/user/work] at 2020-06-09 23:15:57.305305 +0200 CEST by user@kasimir copy started, this may take a while... snapshot 7a746a07 saved snapshot 4e5d5487 of [/home/user/work] at 2020-05-01 22:44:07.012113 +0200 CEST by user@kasimir skipping snapshot 4e5d5487, was already copied to snapshot 50eb62b7 The example command copies all snapshots from the source repository ``/srv/restic-repo`` to the destination repository ``/srv/restic-repo-copy``. Snapshots which have previously been copied between repositories will be skipped by later copy runs. .. important:: This process will have to both download (read) and upload (write) the entire snapshot(s) due to the different encryption keys used in the source and destination repository. This *may incur higher bandwidth usage and costs* than expected during normal backup runs. .. important:: The copying process does not re-chunk files, which may break deduplication between the files copied and files already stored in the destination repository. This means that copied files, which existed in both the source and destination repository, *may occupy up to twice their space* in the destination repository. See below for how to avoid this. The source repository is specified with ``--from-repo`` or can be read from a file specified via ``--from-repository-file``. Both of these options can also be set as environment variables ``$RESTIC_FROM_REPOSITORY`` or ``$RESTIC_FROM_REPOSITORY_FILE``, respectively. For the source repository the password can be read from a file ``--from-password-file`` or from a command ``--from-password-command``. Alternatively the environment variables ``$RESTIC_FROM_PASSWORD_COMMAND`` and ``$RESTIC_FROM_PASSWORD_FILE`` can be used. It is also possible to directly pass the password via ``$RESTIC_FROM_PASSWORD``. The key which should be used for decryption can be selected by passing its ID via the flag ``--from-key-hint`` or the environment variable ``$RESTIC_FROM_KEY_HINT``. .. note:: In case the source and destination repository use the same backend, the configuration options and environment variables used to configure the backend may apply to both repositories – for example it might not be possible to specify different accounts for the source and destination repository. You can avoid this limitation by using the rclone backend along with remotes which are configured in rclone. .. note:: If `copy` is aborted, `copy` will resume the interrupted copying when it is run again. It's possible that up to 10 minutes of progress can be lost because the repository index is only updated from time to time. .. _copy-filtering-snapshots: Filtering snapshots to copy --------------------------- The list of snapshots to copy can be filtered by host, path in the backup and/or a comma-separated tag list: .. code-block:: console $ restic -r /srv/restic-repo-copy copy --from-repo /srv/restic-repo --host luigi --path /srv --tag foo,bar It is also possible to explicitly specify the list of snapshots to copy, in which case only these instead of all snapshots will be copied: .. code-block:: console $ restic -r /srv/restic-repo-copy copy --from-repo /srv/restic-repo 410b18a2 4e5d5487 latest Ensuring deduplication for copied snapshots ------------------------------------------- Even though the copy command can transfer snapshots between arbitrary repositories, deduplication between snapshots from the source and destination repository may not work. To ensure proper deduplication, both repositories have to use the same parameters for splitting large files into smaller chunks, which requires additional setup steps. With the same parameters restic will for both repositories split identical files into identical chunks and therefore deduplication also works for snapshots copied between these repositories. The chunker parameters are generated once when creating a new (destination) repository. That is for a copy destination repository we have to instruct restic to initialize it using the same chunker parameters as the source repository: .. code-block:: console $ restic -r /srv/restic-repo-copy init --from-repo /srv/restic-repo --copy-chunker-params Note that it is not possible to change the chunker parameters of an existing repository. Removing files from snapshots ============================= Snapshots sometimes turn out to include more files that intended. Instead of removing the snapshots entirely and running the corresponding backup commands again (which is not always practical after the fact) it is possible to remove the unwanted files from affected snapshots by rewriting them using the ``rewrite`` command: .. code-block:: console $ restic -r /srv/restic-repo rewrite --exclude secret-file repository c881945a opened (repository version 2) successfully, password is correct snapshot 6160ddb2 of [/home/user/work] at 2022-06-12 16:01:28.406630608 +0200 CEST by user@kasimir excluding /home/user/work/secret-file saved new snapshot b6aee1ff snapshot 4fbaf325 of [/home/user/work] at 2022-05-01 11:22:26.500093107 +0200 CEST by user@kasimir modified 1 snapshots $ restic -r /srv/restic-repo rewrite --exclude secret-file 6160ddb2 repository c881945a opened (repository version 2) successfully, password is correct snapshot 6160ddb2 of [/home/user/work] at 2022-06-12 16:01:28.406630608 +0200 CEST by user@kasimir excluding /home/user/work/secret-file new snapshot saved as b6aee1ff modified 1 snapshots The options ``--exclude``, ``--exclude-file``, ``--iexclude`` and ``--iexclude-file`` are supported. They behave the same way as for the backup command, see :ref:`backup-excluding-files` for details. It is possible to rewrite only a subset of snapshots by filtering them the same way as for the ``copy`` command, see :ref:`copy-filtering-snapshots`. By default, the ``rewrite`` command will keep the original snapshots and create new ones for every snapshot which was modified during rewriting. The new snapshots are marked with the tag ``rewrite`` to differentiate them from the original, rewritten snapshots. Alternatively, you can use the ``--forget`` option to immediately remove the original snapshots. In this case, no tag is added to the new snapshots. Please note that this only removes the snapshots and not the actual data stored in the repository. Run the ``prune`` command afterwards to remove the now unreferenced data (just like when having used the ``forget`` command). In order to preview the changes which ``rewrite`` would make, you can use the ``--dry-run`` option. This will simulate the rewriting process without actually modifying the repository. Instead restic will only print the actions it would perform. Modifying metadata of snapshots =============================== Sometimes it may be desirable to change the metadata of an existing snapshot. Currently, rewriting the hostname and the time of the backup is supported. This is possible using the ``rewrite`` command with the option ``--new-host`` followed by the desired new hostname or the option ``--new-time`` followed by the desired new timestamp. .. code-block:: console $ restic rewrite --new-host newhost --new-time "1999-01-01 11:11:11" repository b7dbade3 opened (version 2, compression level auto) [0:00] 100.00% 1 / 1 index files loaded snapshot 8ed674f4 of [/path/to/abc.txt] at 2023-11-27 21:57:52.439139291 +0100 CET by user@kasimir setting time to 1999-01-01 11:11:11 +0100 CET setting host to newhost saved new snapshot c05da643 modified 1 snapshots .. _checking-integrity: Checking integrity and consistency ================================== Imagine your repository is saved on a server that has a faulty hard drive, or even worse, attackers get privileged access and modify the files in your repository with the intention to make you restore malicious data: .. code-block:: console $ echo "boom" > /srv/restic-repo/index/de30f3231ca2e6a59af4aa84216dfe2ef7339c549dc11b09b84000997b139628 Trying to restore a snapshot which has been modified as shown above will yield an error: .. code-block:: console $ restic -r /srv/restic-repo --no-cache restore c23e491f --target /tmp/restore-work ... Fatal: unable to load index de30f323: load : invalid data returned In order to detect these things before they become a problem, it's a good idea to regularly use the ``check`` command to test whether your repository is healthy and consistent, and that your precious backup data is unharmed. There are two types of checks that can be performed: - Structural consistency and integrity, e.g. snapshots, trees and pack files (default) - Integrity of the actual data that you backed up (enabled with flags, see below) To verify the structure of the repository, issue the ``check`` command. If the repository is damaged like in the example above, ``check`` will detect this and yield the same error as when you tried to restore: .. code-block:: console $ restic -r /srv/restic-repo check ... load indexes error: error loading index de30f323: load : invalid data returned Fatal: LoadIndex returned errors If the repository structure is intact, restic will show that no errors were found: .. code-block:: console $ restic -r /src/restic-repo check ... load indexes check all packs check snapshots, trees and blobs no errors were found By default, check creates a new temporary cache directory to verify that the data stored in the repository is intact. To reuse the existing cache, you can use the ``--with-cache`` flag. If the cache directory is not explicitly set, then ``check`` creates its temporary cache directory in the temporary directory, see :ref:`temporary_files`. Otherwise, the specified cache directory is used, as described in :ref:`caching`. By default, the ``check`` command does not verify that the actual pack files on disk in the repository are unmodified, because doing so requires reading a copy of every pack file in the repository. To tell restic to also verify the integrity of the pack files in the repository, use the ``--read-data`` flag: .. code-block:: console $ restic -r /srv/restic-repo check --read-data ... load indexes check all packs check snapshots, trees and blobs read all data [0:00] 100.00% 3 / 3 items duration: 0:00 no errors were found .. note:: Since ``--read-data`` has to download all pack files in the repository, beware that it might incur higher bandwidth costs than usual and also that it takes more time than the default ``check``. Alternatively, use the ``--read-data-subset`` parameter to check only a subset of the repository pack files at a time. It supports three ways to select a subset. One selects a specific part of pack files, the second and third selects a random subset of the pack files by the given percentage or size. Use ``--read-data-subset=n/t`` to check a specific part of the repository pack files at a time. The parameter takes two values, ``n`` and ``t``. When the check command runs, all pack files in the repository are logically divided in ``t`` (roughly equal) groups, and only files that belong to group number ``n`` are checked. For example, the following commands check all repository pack files over 5 separate invocations: .. code-block:: console $ restic -r /srv/restic-repo check --read-data-subset=1/5 $ restic -r /srv/restic-repo check --read-data-subset=2/5 $ restic -r /srv/restic-repo check --read-data-subset=3/5 $ restic -r /srv/restic-repo check --read-data-subset=4/5 $ restic -r /srv/restic-repo check --read-data-subset=5/5 Use ``--read-data-subset=x%`` to check a randomly chosen subset of the repository pack files. It takes one parameter, ``x``, the percentage of pack files to check as an integer or floating point number. This will not guarantee to cover all available pack files after sufficient runs, but it is easy to automate checking a small subset of data after each backup. For a floating point value the following command may be used: .. code-block:: console $ restic -r /srv/restic-repo check --read-data-subset=2.5% When checking bigger subsets you most likely want to specify the percentage as an integer: .. code-block:: console $ restic -r /srv/restic-repo check --read-data-subset=10% Use ``--read-data-subset=nS`` to check a randomly chosen subset of the repository pack files. It takes one parameter, ``nS``, where 'n' is a whole number representing file size and 'S' is the unit of file size (K/M/G/T) of pack files to check. Behind the scenes, the specified size will be converted to percentage of the total repository size. The behaviour of the check command following this conversion will be the same as the percentage option above. For a file size value the following command may be used: .. code-block:: console $ restic -r /srv/restic-repo check --read-data-subset=50M $ restic -r /srv/restic-repo check --read-data-subset=10G Upgrading the repository format version ======================================= Repositories created using earlier restic versions use an older repository format version and have to be upgraded to allow using all new features. Upgrading must be done explicitly as a newer repository version increases the minimum restic version required to access the repository. For example the repository format version 2 is only readable using restic 0.14.0 or newer. Upgrading to repository version 2 is a two step process: first run ``migrate upgrade_repo_v2`` which will check the repository integrity and then upgrade the repository version. Repository problems must be corrected before the migration will be possible. After the migration is complete, run ``prune`` to compress the repository metadata. To limit the amount of data rewritten in at once, you can use the ``prune --max-repack-size size`` parameter, see :ref:`customize-pruning` for more details. File contents stored in the repository will not be rewritten, data from new backups will be compressed. Over time more and more of the repository will be compressed. To speed up this process and compress all not yet compressed data, you can run ``prune --repack-uncompressed``. When you plan to create your backups with maximum compression, you should also add the ``--compression max`` flag to the prune command. For already backed up data, the compression level cannot be changed later on.