Changelog for restic 0.15.2 (2023-04-24) ======================================= The following sections list the changes in restic 0.15.2 relevant to restic users. The changes are ordered by importance. Summary ------- * Sec #4275: Update golang.org/x/net to address CVE-2022-41723 * Fix #2260: Sanitize filenames printed by `backup` during processing * Fix #4211: Make `dump` interpret `--host` and `--path` correctly * Fix #4239: Correct number of blocks reported in mount point * Fix #4253: Minimize risk of spurious filesystem loops with `mount` * Enh #4180: Add release binaries for riscv64 architecture on Linux * Enh #4219: Upgrade Minio to version 7.0.49 Details ------- * Security #4275: Update golang.org/x/net to address CVE-2022-41723 https://github.com/restic/restic/issues/4275 https://github.com/restic/restic/pull/4213 * Bugfix #2260: Sanitize filenames printed by `backup` during processing The `backup` command would previously not sanitize the filenames it printed during processing, potentially causing newlines or terminal control characters to mangle the status output or even change the state of a terminal. Filenames are now checked and quoted if they contain non-printable or non-Unicode characters. https://github.com/restic/restic/issues/2260 https://github.com/restic/restic/issues/4191 https://github.com/restic/restic/pull/4192 * Bugfix #4211: Make `dump` interpret `--host` and `--path` correctly A regression in restic 0.15.0 caused `dump` to confuse its `--host=` and `--path=` options: it looked for snapshots with paths called `` from hosts called ``. It now treats the options as intended. https://github.com/restic/restic/issues/4211 https://github.com/restic/restic/pull/4212 * Bugfix #4239: Correct number of blocks reported in mount point Restic mount points reported an incorrect number of 512-byte (POSIX standard) blocks for files and links due to a rounding bug. In particular, empty files were reported as taking one block instead of zero. The rounding is now fixed: the number of blocks reported is the file size (or link target size) divided by 512 and rounded up to a whole number. https://github.com/restic/restic/issues/4239 https://github.com/restic/restic/pull/4240 * Bugfix #4253: Minimize risk of spurious filesystem loops with `mount` When a backup contains a directory that has the same name as its parent, say `a/b/b`, and the GNU `find` command was run on this backup in a restic mount, `find` would refuse to traverse the lowest `b` directory, instead printing `File system loop detected`. This was due to the way the restic mount command generates inode numbers for directories in the mount point. The rule for generating these inode numbers was changed in 0.15.0. It has now been changed again to avoid this issue. A perfect rule does not exist, but the probability of this behavior occurring is now extremely small. When it does occur, the mount point is not broken, and scripts that traverse the mount point should work as long as they don't rely on inode numbers for detecting filesystem loops. https://github.com/restic/restic/issues/4253 https://github.com/restic/restic/pull/4255 * Enhancement #4180: Add release binaries for riscv64 architecture on Linux Builds for the `riscv64` architecture on Linux are now included in the release binaries. https://github.com/restic/restic/pull/4180 * Enhancement #4219: Upgrade Minio to version 7.0.49 The upgraded version now allows use of the `ap-southeast-4` region (Melbourne). https://github.com/restic/restic/pull/4219 Changelog for restic 0.15.1 (2023-01-30) ======================================= The following sections list the changes in restic 0.15.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #3750: Remove `b2_download_file_by_name: 404` warning from B2 backend * Fix #4147: Make `prune --quiet` not print progress bar * Fix #4163: Make `self-update --output` work with new filename on Windows * Fix #4167: Add missing ETA in `backup` progress bar * Enh #4143: Ignore empty lock files Details ------- * Bugfix #3750: Remove `b2_download_file_by_name: 404` warning from B2 backend In some cases the B2 backend could print `b2_download_file_by_name: 404: : b2.b2err` warnings. These are only debug messages and can be safely ignored. Restic now uses an updated library for accessing B2, which removes the warning. https://github.com/restic/restic/issues/3750 https://github.com/restic/restic/issues/4144 https://github.com/restic/restic/pull/4146 * Bugfix #4147: Make `prune --quiet` not print progress bar A regression in restic 0.15.0 caused `prune --quiet` to show a progress bar while deciding how to process each pack files. This has now been fixed. https://github.com/restic/restic/issues/4147 https://github.com/restic/restic/pull/4153 * Bugfix #4163: Make `self-update --output` work with new filename on Windows Since restic 0.14.0 the `self-update` command did not work when a custom output filename was specified via the `--output` option. This has now been fixed. As a workaround, either use an older restic version to run the self-update or create an empty file with the output filename before updating e.g. using CMD: `type nul > new-file.exe` `restic self-update --output new-file.exe` https://github.com/restic/restic/pull/4163 https://forum.restic.net/t/self-update-windows-started-failing-after-release-of-0-15/5836 * Bugfix #4167: Add missing ETA in `backup` progress bar A regression in restic 0.15.0 caused the ETA to be missing from the progress bar displayed by the `backup` command. This has now been fixed. https://github.com/restic/restic/pull/4167 * Enhancement #4143: Ignore empty lock files With restic 0.15.0 the checks for stale locks became much stricter than before. In particular, empty or unreadable locks were no longer silently ignored. This made restic to complain with `Load(, 0, 0) returned error, retrying after 552.330144ms: load(): invalid data returned` and fail in the end. The error message is now clarified and the implementation changed to ignore empty lock files which are sometimes created as the result of a failed uploads on some backends. Please note that unreadable lock files still have to cleaned up manually. To do so, you can run `restic unlock --remove-all` which removes all existing lock files. But first make sure that no other restic process is currently using the repository. https://github.com/restic/restic/issues/4143 https://github.com/restic/restic/pull/4152 Changelog for restic 0.15.0 (2023-01-12) ======================================= The following sections list the changes in restic 0.15.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #2015: Make `mount` return exit code 0 after receiving Ctrl-C / SIGINT * Fix #2578: Make `restore` replace existing symlinks * Fix #2591: Don't read password from stdin for `backup --stdin` * Fix #3161: Delete files on Backblaze B2 more reliably * Fix #3336: Make SFTP backend report no space left on device * Fix #3567: Improve handling of interrupted syscalls in `mount` command * Fix #3897: Fix stuck `copy` command when `-o .connections=1` * Fix #3918: Correct prune statistics for partially compressed repositories * Fix #3951: Make `ls` return exit code 1 if snapshot cannot be loaded * Fix #4003: Make `backup` no longer hang on Solaris when seeing a FIFO file * Fix #4016: Support ExFAT-formatted local backends on macOS Ventura * Fix #4085: Make `init` ignore "Access Denied" errors when creating S3 buckets * Fix #4100: Make `self-update` enabled by default only in release builds * Fix #4103: Don't generate negative UIDs and GIDs in tar files from `dump` * Chg #2724: Include full snapshot ID in JSON output of `backup` * Chg #3929: Make `unlock` display message only when locks were actually removed * Chg #4033: Don't print skipped snapshots by default in `copy` command * Chg #4041: Update dependencies and require Go 1.18 or newer * Enh #14: Implement `rewrite` command * Enh #79: Restore files with long runs of zeros as sparse files * Enh #1078: Support restoring symbolic links on Windows * Enh #1734: Inform about successful retries after errors * Enh #1866: Improve handling of directories with duplicate entries * Enh #2134: Support B2 API keys restricted to hiding but not deleting files * Enh #2152: Make `init` open only one connection for the SFTP backend * Enh #2533: Handle cache corruption on disk and in downloads * Enh #2715: Stricter repository lock handling * Enh #2750: Make backup file read concurrency configurable * Enh #3029: Add support for `credential_process` to S3 backend * Enh #3096: Make `mount` command support macOS using macFUSE 4.x * Enh #3124: Support JSON output for the `init` command * Enh #3899: Optimize prune memory usage * Enh #3905: Improve speed of parent snapshot detection in `backup` command * Enh #3915: Add compression statistics to the `stats` command * Enh #3925: Provide command completion for PowerShell * Enh #3931: Allow `backup` file tree scanner to be disabled * Enh #3932: Improve handling of ErrDot errors in rclone and sftp backends * Enh #3943: Ignore additional/unknown files in repository * Enh #3955: Improve `backup` performance for small files Details ------- * Bugfix #2015: Make `mount` return exit code 0 after receiving Ctrl-C / SIGINT To stop the `mount` command, a user has to press Ctrl-C or send a SIGINT signal to restic. This used to cause restic to exit with a non-zero exit code. The exit code has now been changed to zero as the above is the expected way to stop the `mount` command and should therefore be considered successful. https://github.com/restic/restic/issues/2015 https://github.com/restic/restic/pull/3894 * Bugfix #2578: Make `restore` replace existing symlinks When restoring a symlink, restic used to report an error if the target path already existed. This has now been fixed such that the potentially existing target path is first removed before the symlink is restored. https://github.com/restic/restic/issues/2578 https://github.com/restic/restic/pull/3780 * Bugfix #2591: Don't read password from stdin for `backup --stdin` The `backup` command when used with `--stdin` previously tried to read first the password, then the data to be backed up from standard input. This meant it would often confuse part of the data for the password. From now on, it will instead exit with the message `Fatal: cannot read both password and data from stdin` unless the password is passed in some other way (such as `--restic-password-file`, `RESTIC_PASSWORD`, etc). To enter the password interactively a password command has to be used. For example on Linux, `mysqldump somedatabase | restic backup --stdin --password-command='sh -c "systemd-ask-password < /dev/tty"'` securely reads the password from the terminal. https://github.com/restic/restic/issues/2591 https://github.com/restic/restic/pull/4011 * Bugfix #3161: Delete files on Backblaze B2 more reliably Restic used to only delete the latest version of files stored in B2. In most cases this worked well as there was only a single version of the file. However, due to retries while uploading it is possible for multiple file versions to be stored at B2. This could lead to various problems for files that should have been deleted but still existed. The implementation has now been changed to delete all versions of files, which doubles the amount of Class B transactions necessary to delete files, but assures that no file versions are left behind. https://github.com/restic/restic/issues/3161 https://github.com/restic/restic/pull/3885 * Bugfix #3336: Make SFTP backend report no space left on device Backing up to an SFTP backend would spew repeated SSH_FX_FAILURE messages when the remote disk was full. Restic now reports "sftp: no space left on device" and exits immediately when it detects this condition. A fix for this issue was implemented in restic 0.12.1, but unfortunately the fix itself contained a bug that prevented it from taking effect. https://github.com/restic/restic/issues/3336 https://github.com/restic/restic/pull/3345 https://github.com/restic/restic/pull/4075 * Bugfix #3567: Improve handling of interrupted syscalls in `mount` command Accessing restic's FUSE mount could result in "input/output" errors when using programs in which syscalls can be interrupted. This is for example the case for Go programs. This has now been fixed by improved error handling of interrupted syscalls. https://github.com/restic/restic/issues/3567 https://github.com/restic/restic/issues/3694 https://github.com/restic/restic/pull/3875 * Bugfix #3897: Fix stuck `copy` command when `-o .connections=1` When running the `copy` command with `-o .connections=1` the command would be infinitely stuck. This has now been fixed. https://github.com/restic/restic/issues/3897 https://github.com/restic/restic/pull/3898 * Bugfix #3918: Correct prune statistics for partially compressed repositories In a partially compressed repository, one data blob can exist both in an uncompressed and a compressed version. This caused the `prune` statistics to become inaccurate and e.g. report a too high value for the unused size, such as "unused size after prune: 16777215.991 TiB". This has now been fixed. https://github.com/restic/restic/issues/3918 https://github.com/restic/restic/pull/3980 * Bugfix #3951: Make `ls` return exit code 1 if snapshot cannot be loaded The `ls` command used to show a warning and return exit code 0 when failing to load a snapshot. This has now been fixed such that it instead returns exit code 1 (still showing a warning). https://github.com/restic/restic/pull/3951 * Bugfix #4003: Make `backup` no longer hang on Solaris when seeing a FIFO file The `backup` command used to hang on Solaris whenever it encountered a FIFO file (named pipe), due to a bug in the handling of extended attributes. This bug has now been fixed. https://github.com/restic/restic/issues/4003 https://github.com/restic/restic/pull/4053 * Bugfix #4016: Support ExFAT-formatted local backends on macOS Ventura ExFAT-formatted disks could not be used as local backends starting from macOS Ventura. Restic commands would fail with an "inappropriate ioctl for device" error. This has now been fixed. https://github.com/restic/restic/issues/4016 https://github.com/restic/restic/pull/4021 * Bugfix #4085: Make `init` ignore "Access Denied" errors when creating S3 buckets In restic 0.9.0 through 0.13.0, the `init` command ignored some permission errors from S3 backends when trying to check for bucket existence, so that manually created buckets with custom permissions could be used for backups. This feature became broken in 0.14.0, but has now been restored again. https://github.com/restic/restic/issues/4085 https://github.com/restic/restic/pull/4086 * Bugfix #4100: Make `self-update` enabled by default only in release builds The `self-update` command was previously included by default in all builds of restic as opposed to only in official release builds, even if the `selfupdate` tag was not explicitly enabled when building. This has now been corrected, and the `self-update` command is only available if restic was built with `-tags selfupdate` (as done for official release builds by `build.go`). https://github.com/restic/restic/pull/4100 * Bugfix #4103: Don't generate negative UIDs and GIDs in tar files from `dump` When using a 32-bit build of restic, the `dump` command could in some cases create tar files containing negative UIDs and GIDs, which cannot be read by GNU tar. This corner case especially applies to backups from stdin on Windows. This is now fixed such that `dump` creates valid tar files in these cases too. https://github.com/restic/restic/issues/4103 https://github.com/restic/restic/pull/4104 * Change #2724: Include full snapshot ID in JSON output of `backup` We have changed the JSON output of the backup command to include the full snapshot ID instead of just a shortened version, as the latter can be ambiguous in some rare cases. To derive the short ID, please truncate the full ID down to eight characters. https://github.com/restic/restic/issues/2724 https://github.com/restic/restic/pull/3993 * Change #3929: Make `unlock` display message only when locks were actually removed The `unlock` command used to print the "successfully removed locks" message whenever it was run, regardless of lock files having being removed or not. This has now been changed such that it only prints the message if any lock files were actually removed. In addition, it also reports the number of removed lock files. https://github.com/restic/restic/issues/3929 https://github.com/restic/restic/pull/3935 * Change #4033: Don't print skipped snapshots by default in `copy` command The `copy` command used to print each snapshot that was skipped because it already existed in the target repository. The amount of this output could practically bury the list of snapshots that were actually copied. From now on, the skipped snapshots are by default not printed at all, but this can be re-enabled by increasing the verbosity level of the command. https://github.com/restic/restic/issues/4033 https://github.com/restic/restic/pull/4066 * Change #4041: Update dependencies and require Go 1.18 or newer Most dependencies have been updated. Since some libraries require newer language features, support for Go 1.15-1.17 has been dropped, which means that restic now requires at least Go 1.18 to build. https://github.com/restic/restic/pull/4041 * Enhancement #14: Implement `rewrite` command Restic now has a `rewrite` command which allows to rewrite existing snapshots to remove unwanted files. https://github.com/restic/restic/issues/14 https://github.com/restic/restic/pull/2731 https://github.com/restic/restic/pull/4079 * Enhancement #79: Restore files with long runs of zeros as sparse files When using `restore --sparse`, the restorer may now write files containing long runs of zeros as sparse files (also called files with holes), where the zeros are not actually written to disk. How much space is saved by writing sparse files depends on the operating system, file system and the distribution of zeros in the file. During backup restic still reads the whole file including sparse regions, but with optimized processing speed of sparse regions. https://github.com/restic/restic/issues/79 https://github.com/restic/restic/issues/3903 https://github.com/restic/restic/pull/2601 https://github.com/restic/restic/pull/3854 https://forum.restic.net/t/sparse-file-support/1264 * Enhancement #1078: Support restoring symbolic links on Windows The `restore` command now supports restoring symbolic links on Windows. Because of Windows specific restrictions this is only possible when running restic with the `SeCreateSymbolicLinkPrivilege` privilege or as an administrator. https://github.com/restic/restic/issues/1078 https://github.com/restic/restic/issues/2699 https://github.com/restic/restic/pull/2875 * Enhancement #1734: Inform about successful retries after errors When a recoverable error is encountered, restic shows a warning message saying that it's retrying, e.g.: `Save() returned error, retrying after 357.131936ms: ...` This message can be confusing in that it never clearly states whether the retry is successful or not. This has now been fixed such that restic follows up with a message confirming a successful retry, e.g.: `Save() operation successful after 1 retries` https://github.com/restic/restic/issues/1734 https://github.com/restic/restic/pull/2661 * Enhancement #1866: Improve handling of directories with duplicate entries If for some reason a directory contains a duplicate entry, the `backup` command would previously fail with a `node "path/to/file" already present` or `nodes are not ordered got "path/to/file", last "path/to/file"` error. The error handling has been improved to only report a warning in this case. Make sure to check that the filesystem in question is not damaged if you see this! https://github.com/restic/restic/issues/1866 https://github.com/restic/restic/issues/3937 https://github.com/restic/restic/pull/3880 * Enhancement #2134: Support B2 API keys restricted to hiding but not deleting files When the B2 backend does not have the necessary permissions to permanently delete files, it now automatically falls back to hiding files. This allows using restic with an application key which is not allowed to delete files. This can prevent an attacker from deleting backups with such an API key. To use this feature create an application key without the `deleteFiles` capability. It is recommended to restrict the key to just one bucket. For example using the `b2` command line tool: `b2 create-key --bucket listBuckets,readFiles,writeFiles,listFiles` Alternatively, you can use the S3 backend to access B2, as described in the documentation. In this mode, files are also only hidden instead of being deleted permanently. https://github.com/restic/restic/issues/2134 https://github.com/restic/restic/pull/2398 * Enhancement #2152: Make `init` open only one connection for the SFTP backend The `init` command using the SFTP backend used to connect twice to the repository. This could be inconvenient if the user must enter a password, or cause `init` to fail if the server does not correctly close the first SFTP connection. This has now been fixed by reusing the first/initial SFTP connection opened. https://github.com/restic/restic/issues/2152 https://github.com/restic/restic/pull/3882 * Enhancement #2533: Handle cache corruption on disk and in downloads In rare situations, like for example after a system crash, the data stored in the cache might be corrupted. This could cause restic to fail and required manually deleting the cache. Restic now automatically removes broken data from the cache, allowing it to recover from such a situation without user intervention. In addition, restic retries downloads which return corrupt data in order to also handle temporary download problems. https://github.com/restic/restic/issues/2533 https://github.com/restic/restic/pull/3521 * Enhancement #2715: Stricter repository lock handling Previously, restic commands kept running even if they failed to refresh their locks in time. This could be a problem e.g. in case the client system running a backup entered the standby power mode while the backup was still in progress (which would prevent the client from refreshing its lock), and after a short delay another host successfully runs `unlock` and `prune` on the repository, which would remove all data added by the in-progress backup. If the backup client later continues its backup, even though its lock had expired in the meantime, this would lead to an incomplete snapshot. To address this, lock handling is now much stricter. Commands requiring a lock are canceled if the lock is not refreshed successfully in time. In addition, if a lock file is not readable restic will not allow starting a command. It may be necessary to remove invalid lock files manually or use `unlock --remove-all`. Please make sure that no other restic processes are running concurrently before doing this, however. https://github.com/restic/restic/issues/2715 https://github.com/restic/restic/pull/3569 * Enhancement #2750: Make backup file read concurrency configurable The `backup` command now supports a `--read-concurrency` option which allows tuning restic for very fast storage like NVMe disks by controlling the number of concurrent file reads during the backup process. https://github.com/restic/restic/pull/2750 * Enhancement #3029: Add support for `credential_process` to S3 backend Restic now uses a newer library for the S3 backend, which adds support for the `credential_process` option in the AWS credential configuration. https://github.com/restic/restic/issues/3029 https://github.com/restic/restic/issues/4034 https://github.com/restic/restic/pull/4025 * Enhancement #3096: Make `mount` command support macOS using macFUSE 4.x Restic now uses a different FUSE library for mounting snapshots and making them available as a FUSE filesystem using the `mount` command. This adds support for macFUSE 4.x which can be used to make this work on recent macOS versions. https://github.com/restic/restic/issues/3096 https://github.com/restic/restic/pull/4024 * Enhancement #3124: Support JSON output for the `init` command The `init` command used to ignore the `--json` option, but now outputs a JSON message if the repository was created successfully. https://github.com/restic/restic/issues/3124 https://github.com/restic/restic/pull/3132 * Enhancement #3899: Optimize prune memory usage The `prune` command needs large amounts of memory in order to determine what to keep and what to remove. This is now optimized to use up to 30% less memory. https://github.com/restic/restic/pull/3899 * Enhancement #3905: Improve speed of parent snapshot detection in `backup` command Backing up a large number of files using `--files-from-verbatim` or `--files-from-raw` options could require a long time to find the parent snapshot. This has been improved. https://github.com/restic/restic/pull/3905 * Enhancement #3915: Add compression statistics to the `stats` command When executed with `--mode raw-data` on a repository that supports compression, the `stats` command now calculates and displays, for the selected repository or snapshots: the uncompressed size of the data; the compression progress (percentage of data that has been compressed); the compression ratio of the compressed data; the total space saving. It also takes into account both the compressed and uncompressed data if the repository is only partially compressed. https://github.com/restic/restic/pull/3915 * Enhancement #3925: Provide command completion for PowerShell Restic already provided generation of completion files for bash, fish and zsh. Now powershell is supported, too. https://github.com/restic/restic/pull/3925/files * Enhancement #3931: Allow `backup` file tree scanner to be disabled The `backup` command walks the file tree in a separate scanner process to find the total size and file/directory count, and uses this to provide an ETA. This can slow down backups, especially of network filesystems. The command now has a new option `--no-scan` which can be used to disable this scanning in order to speed up backups when needed. https://github.com/restic/restic/pull/3931 * Enhancement #3932: Improve handling of ErrDot errors in rclone and sftp backends Since Go 1.19, restic can no longer implicitly run relative executables which are found in the current directory (e.g. `rclone` if found in `.`). This is a security feature of Go to prevent against running unintended and possibly harmful executables. The error message for this was just "cannot run executable found relative to current directory". This has now been improved to yield a more specific error message, informing the user how to explicitly allow running the executable using the `-o rclone.program` and `-o sftp.command` extended options with `./`. https://github.com/restic/restic/issues/3932 https://pkg.go.dev/os/exec#hdr-Executables_in_the_current_directory https://go.dev/blog/path-security * Enhancement #3943: Ignore additional/unknown files in repository If a restic repository had additional files in it (not created by restic), commands like `find` and `restore` could become confused and fail with an `multiple IDs with prefix "12345678" found` error. These commands now ignore such additional files. https://github.com/restic/restic/pull/3943 https://forum.restic.net/t/which-protocol-should-i-choose-for-remote-linux-backups/5446/17 * Enhancement #3955: Improve `backup` performance for small files When backing up small files restic was slower than it could be. In particular this affected backups using maximum compression. This has been fixed by reworking the internal parallelism of the backup command, making it back up small files around two times faster. https://github.com/restic/restic/pull/3955 Changelog for restic 0.14.0 (2022-08-25) ======================================= The following sections list the changes in restic 0.14.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #2248: Support `self-update` on Windows * Fix #3428: List snapshots in backend at most once to resolve snapshot IDs * Fix #3432: Fix rare 'not found in repository' error for `copy` command * Fix #3681: Fix rclone (shimmed by Scoop) and sftp not working on Windows * Fix #3685: The `diff` command incorrectly listed some files as added * Fix #3716: Print "wrong password" to stderr instead of stdout * Fix #3720: Directory sync errors for repositories accessed via SMB * Fix #3736: The `stats` command miscalculated restore size for multiple snapshots * Fix #3772: Correctly rebuild index for legacy repositories * Fix #3776: Limit number of key files tested while opening a repository * Fix #3861: Yield error on invalid policy to `forget` * Chg #1842: Support debug log creation in release builds * Chg #3295: Deprecate `check --check-unused` and add further checks * Chg #3680: Update dependencies and require Go 1.15 or newer * Chg #3742: Replace `--repo2` option used by `init`/`copy` with `--from-repo` * Enh #21: Add compression support * Enh #1153: Support pruning even when the disk is full * Enh #2162: Adaptive IO concurrency based on backend connections * Enh #2291: Allow pack size customization * Enh #2295: Allow use of SAS token to authenticate to Azure * Enh #2351: Use config file permissions to control file group access * Enh #2696: Improve backup speed with many small files * Enh #2907: Make snapshot directory structure of `mount` command customizable * Enh #2923: Improve speed of `copy` command * Enh #3114: Optimize handling of duplicate blobs in `prune` * Enh #3465: Improve handling of temporary files on Windows * Enh #3475: Allow limiting IO concurrency for local and SFTP backend * Enh #3484: Stream data in `check` and `prune` commands * Enh #3709: Validate exclude patterns before backing up * Enh #3729: Display full IDs in `check` warnings * Enh #3773: Optimize memory usage for directories with many files * Enh #3819: Validate include/exclude patterns before restoring * Enh #3837: Improve SFTP repository initialization over slow links Details ------- * Bugfix #2248: Support `self-update` on Windows Restic `self-update` would fail in situations where the operating system locks running binaries, including Windows. The new behavior works around this by renaming the running file and swapping the updated file in place. https://github.com/restic/restic/issues/2248 https://github.com/restic/restic/pull/3675 * Bugfix #3428: List snapshots in backend at most once to resolve snapshot IDs Many commands support specifying a list of snapshot IDs which are then used to determine the snapshots to be processed by the command. To resolve snapshot IDs or `latest`, and check that these exist, restic previously listed all snapshots stored in the repository. Depending on the backend this could be a slow and/or expensive operation. Restic now lists the snapshots only once and remembers the result in order to resolve all further snapshot IDs swiftly. https://github.com/restic/restic/issues/3428 https://github.com/restic/restic/pull/3570 https://github.com/restic/restic/pull/3395 * Bugfix #3432: Fix rare 'not found in repository' error for `copy` command In rare cases `copy` (and other commands) would report that `LoadTree(...)` returned an `id [...] not found in repository` error. This could be caused by a backup or copy command running concurrently. The error was only temporary; running the failed restic command a second time as a workaround did resolve the error. This issue has now been fixed by correcting the order in which restic reads data from the repository. It is now guaranteed that restic only loads snapshots for which all necessary data is already available. https://github.com/restic/restic/issues/3432 https://github.com/restic/restic/pull/3570 * Bugfix #3681: Fix rclone (shimmed by Scoop) and sftp not working on Windows In #3602 a fix was introduced to address the problem of `rclone` prematurely exiting when Ctrl+C is pressed on Windows. The solution was to create the subprocess with its console detached from the restic console. However, this solution failed when using `rclone` installed by Scoop or using `sftp` with a passphrase-protected private key. We've now fixed this by using a different approach to prevent Ctrl-C from passing down too early. https://github.com/restic/restic/issues/3681 https://github.com/restic/restic/issues/3692 https://github.com/restic/restic/pull/3696 * Bugfix #3685: The `diff` command incorrectly listed some files as added There was a bug in the `diff` command, causing it to always show files in a removed directory as added. This has now been fixed. https://github.com/restic/restic/issues/3685 https://github.com/restic/restic/pull/3686 * Bugfix #3716: Print "wrong password" to stderr instead of stdout If an invalid password was entered, the error message was printed on stdout and not on stderr as intended. This has now been fixed. https://github.com/restic/restic/pull/3716 https://forum.restic.net/t/4965 * Bugfix #3720: Directory sync errors for repositories accessed via SMB On Linux and macOS, accessing a repository via a SMB/CIFS mount resulted in restic failing to save the lock file, yielding the following errors: Save() returned error, retrying after 552.330144ms: sync /repo/locks: no such file or directory Save() returned error, retrying after 552.330144ms: sync /repo/locks: invalid argument This has now been fixed by ignoring the relevant error codes. https://github.com/restic/restic/issues/3720 https://github.com/restic/restic/issues/3751 https://github.com/restic/restic/pull/3752 * Bugfix #3736: The `stats` command miscalculated restore size for multiple snapshots Since restic 0.10.0 the restore size calculated by the `stats` command for multiple snapshots was too low. The hardlink detection was accidentally applied across multiple snapshots and thus ignored many files. This has now been fixed. https://github.com/restic/restic/issues/3736 https://github.com/restic/restic/pull/3740 * Bugfix #3772: Correctly rebuild index for legacy repositories After running `rebuild-index` on a legacy repository containing mixed pack files (that is, pack files which store both metadata and file data), `check` printed warnings like `pack 12345678 contained in several indexes: ...`. This warning was not critical, but has now nonetheless been fixed by properly handling mixed pack files while rebuilding the index. Running `prune` for such legacy repositories will also fix the warning by reorganizing the pack files which caused it. https://github.com/restic/restic/pull/3772 https://github.com/restic/restic/pull/3884 https://forum.restic.net/t/5044/13 * Bugfix #3776: Limit number of key files tested while opening a repository Previously, restic tested the password against every key in the repository when opening a repository. The more keys there were in the repository, the slower this operation became. Restic now tests the password against up to 20 key files in the repository. Alternatively, you can use the `--key-hint=` option to specify a specific key file to use instead. https://github.com/restic/restic/pull/3776 * Bugfix #3861: Yield error on invalid policy to `forget` The `forget` command previously silently ignored invalid/unsupported units in the duration options, such as e.g. `--keep-within-daily 2w`. Specifying an invalid/unsupported duration unit now results in an error. https://github.com/restic/restic/issues/3861 https://github.com/restic/restic/pull/3862 * Change #1842: Support debug log creation in release builds Creating a debug log was only possible in debug builds which required users to manually build restic. We changed the release builds to allow creating debug logs by simply setting the environment variable `DEBUG_LOG=logname.log`. https://github.com/restic/restic/issues/1842 https://github.com/restic/restic/pull/3826 * Change #3295: Deprecate `check --check-unused` and add further checks Since restic 0.12.0, it is expected to still have unused blobs after running `prune`. This made the `--check-unused` option of the `check` command rather useless and tended to confuse users. This option has been deprecated and is now ignored. The `check` command now also warns if a repository is using either the legacy S3 layout or mixed pack files with both tree and data blobs. The latter is known to cause performance problems. https://github.com/restic/restic/issues/3295 https://github.com/restic/restic/pull/3730 * Change #3680: Update dependencies and require Go 1.15 or newer We've updated most dependencies. Since some libraries require newer language features we're dropping support for Go 1.14, which means that restic now requires at least Go 1.15 to build. https://github.com/restic/restic/issues/3680 https://github.com/restic/restic/issues/3883 * Change #3742: Replace `--repo2` option used by `init`/`copy` with `--from-repo` The `init` and `copy` commands can read data from another repository. However, confusingly `--repo2` referred to the repository *from* which the `init` command copies parameters, but for the `copy` command `--repo2` referred to the copy *destination*. We've introduced a new option, `--from-repo`, which always refers to the source repository for both commands. The old parameter names have been deprecated but still work. To create a new repository and copy all snapshots to it, the commands are now as follows: ``` restic -r /srv/restic-repo-copy init --from-repo /srv/restic-repo --copy-chunker-params restic -r /srv/restic-repo-copy copy --from-repo /srv/restic-repo ``` https://github.com/restic/restic/pull/3742 https://forum.restic.net/t/5017 * Enhancement #21: Add compression support We've added compression support to the restic repository format. To create a repository using the new format run `init --repository-version 2`. Please note that the repository cannot be read by restic versions prior to 0.14.0. You can configure whether data is compressed with the option `--compression`. It can be set to `auto` (the default, which will compress very fast), `max` (which will trade backup speed and CPU usage for better compression), or `off` (which disables compression). Each setting is only applied for the current run of restic and does *not* apply to future runs. The option can also be set via the environment variable `RESTIC_COMPRESSION`. To upgrade in place run `migrate upgrade_repo_v2` followed by `prune`. See the documentation for more details. The migration checks the repository integrity and upgrades the repository format, but will not change any data. Afterwards, prune will rewrite the metadata to make use of compression. As an alternative you can use the `copy` command to migrate snapshots; First create a new repository using `init --repository-version 2 --copy-chunker-params --repo2 path/to/old/repo`, and then use the `copy` command to copy all snapshots to the new repository. https://github.com/restic/restic/issues/21 https://github.com/restic/restic/issues/3779 https://github.com/restic/restic/pull/3666 https://github.com/restic/restic/pull/3704 https://github.com/restic/restic/pull/3733 * Enhancement #1153: Support pruning even when the disk is full When running out of disk space it was no longer possible to add or remove data from a repository. To help with recovering from such a deadlock, the prune command now supports an `--unsafe-recover-no-free-space` option to recover from these situations. Make sure to read the documentation first! https://github.com/restic/restic/issues/1153 https://github.com/restic/restic/pull/3481 * Enhancement #2162: Adaptive IO concurrency based on backend connections Many commands used hard-coded limits for the number of concurrent operations. This prevented speed improvements by increasing the number of connections used by a backend. These limits have now been replaced by using the configured number of backend connections instead, which can be controlled using the `-o .connections=5` option. Commands will then automatically scale their parallelism accordingly. To limit the number of CPU cores used by restic, you can set the environment variable `GOMAXPROCS` accordingly. For example to use a single CPU core, use `GOMAXPROCS=1`. https://github.com/restic/restic/issues/2162 https://github.com/restic/restic/issues/1467 https://github.com/restic/restic/pull/3611 * Enhancement #2291: Allow pack size customization Restic now uses a target pack size of 16 MiB by default. This can be customized using the `--pack-size size` option. Supported pack sizes range between 4 and 128 MiB. It is possible to migrate an existing repository to _larger_ pack files using `prune --repack-small`. This will rewrite every pack file which is significantly smaller than the target size. https://github.com/restic/restic/issues/2291 https://github.com/restic/restic/pull/3731 * Enhancement #2295: Allow use of SAS token to authenticate to Azure Previously restic only supported AccountKeys to authenticate to Azure storage accounts, which necessitates giving a significant amount of access. We added support for Azure SAS tokens which are a more fine-grained and time-limited manner of granting access. Set the `AZURE_ACCOUNT_NAME` and `AZURE_ACCOUNT_SAS` environment variables to use a SAS token for authentication. Note that if `AZURE_ACCOUNT_KEY` is set, it will take precedence. https://github.com/restic/restic/issues/2295 https://github.com/restic/restic/pull/3661 * Enhancement #2351: Use config file permissions to control file group access Previously files in a local/SFTP repository would always end up with very restrictive access permissions, allowing access only to the owner. This prevented a number of valid use-cases involving groups and ACLs. We now use the permissions of the config file in the repository to decide whether group access should be given to newly created repository files or not. We arrange for repository files to be created group readable exactly when the repository config file is group readable. To opt-in to group readable repositories, a simple `chmod -R g+r` or equivalent on the config file can be used. For repositories that should be writable by group members a tad more setup is required, see the docs. Posix ACLs can also be used now that the group permissions being forced to zero no longer masks the effect of ACL entries. https://github.com/restic/restic/issues/2351 https://github.com/restic/restic/pull/3419 https://forum.restic.net/t/1391 * Enhancement #2696: Improve backup speed with many small files We have restructured the backup pipeline to continue reading files while all upload connections are busy. This allows the backup to already prepare the next data file such that the upload can continue as soon as a connection becomes available. This can especially improve the backup performance for high latency backends. The upload concurrency is now controlled using the `-o .connections=5` option. https://github.com/restic/restic/issues/2696 https://github.com/restic/restic/pull/3489 * Enhancement #2907: Make snapshot directory structure of `mount` command customizable We've added the possibility to customize the snapshot directory structure of the `mount` command using templates passed to the `--snapshot-template` option. The formatting of snapshots' timestamps is now controlled using `--time-template` and supports subdirectories to for example group snapshots by year. Please see `restic help mount` for further details. Characters in tag names which are not allowed in a filename are replaced by underscores `_`. For example a tag `foo/bar` will result in a directory name of `foo_bar`. https://github.com/restic/restic/issues/2907 https://github.com/restic/restic/pull/2913 https://github.com/restic/restic/pull/3691 * Enhancement #2923: Improve speed of `copy` command The `copy` command could require a long time to copy snapshots for non-local backends. This has been improved to provide a throughput comparable to the `restore` command. Additionally, `copy` now displays a progress bar. https://github.com/restic/restic/issues/2923 https://github.com/restic/restic/pull/3513 * Enhancement #3114: Optimize handling of duplicate blobs in `prune` Restic `prune` always used to repack all data files containing duplicate blobs. This effectively removed all duplicates during prune. However, as a consequence all these data files were repacked even if the unused repository space threshold could be reached with less work. This is now changed and `prune` works nice and fast even when there are lots of duplicate blobs. https://github.com/restic/restic/issues/3114 https://github.com/restic/restic/pull/3290 * Enhancement #3465: Improve handling of temporary files on Windows In some cases restic failed to delete temporary files, causing the current command to fail. This has now been fixed by ensuring that Windows automatically deletes the file. In addition, temporary files are only written to disk when necessary, reducing disk writes. https://github.com/restic/restic/issues/3465 https://github.com/restic/restic/issues/1551 https://github.com/restic/restic/pull/3610 * Enhancement #3475: Allow limiting IO concurrency for local and SFTP backend Restic did not support limiting the IO concurrency / number of connections for accessing repositories stored using the local or SFTP backends. The number of connections is now limited as for other backends, and can be configured via the the `-o local.connections=2` and `-o sftp.connections=5` options. This ensures that restic does not overwhelm the backend with concurrent IO operations. https://github.com/restic/restic/pull/3475 * Enhancement #3484: Stream data in `check` and `prune` commands The commands `check --read-data` and `prune` previously downloaded data files into temporary files which could end up being written to disk. This could cause a large amount of data being written to disk. The pack files are now instead streamed, which removes the need for temporary files. Please note that *uploads* during `backup` and `prune` still require temporary files. https://github.com/restic/restic/issues/3710 https://github.com/restic/restic/pull/3484 https://github.com/restic/restic/pull/3717 * Enhancement #3709: Validate exclude patterns before backing up Exclude patterns provided via `--exclude`, `--iexclude`, `--exclude-file` or `--iexclude-file` previously weren't validated. As a consequence, invalid patterns resulted in files that were meant to be excluded being backed up. Restic now validates all patterns before running the backup and aborts with a fatal error if an invalid pattern is detected. https://github.com/restic/restic/issues/3709 https://github.com/restic/restic/pull/3734 * Enhancement #3729: Display full IDs in `check` warnings When running commands to inspect or repair a damaged repository, it is often necessary to supply the full IDs of objects stored in the repository. The output of `check` now includes full IDs instead of their shortened variant. https://github.com/restic/restic/pull/3729 * Enhancement #3773: Optimize memory usage for directories with many files Backing up a directory with hundreds of thousands or more files caused restic to require large amounts of memory. We've now optimized the `backup` command such that it requires up to 30% less memory. https://github.com/restic/restic/pull/3773 * Enhancement #3819: Validate include/exclude patterns before restoring Patterns provided to `restore` via `--exclude`, `--iexclude`, `--include` and `--iinclude` weren't validated before running the restore. Invalid patterns would result in error messages being printed repeatedly, and possibly unwanted files being restored. Restic now validates all patterns before running the restore, and aborts with a fatal error if an invalid pattern is detected. https://github.com/restic/restic/pull/3819 * Enhancement #3837: Improve SFTP repository initialization over slow links The `init` command, when used on an SFTP backend, now sends multiple `mkdir` commands to the backend concurrently. This reduces the waiting times when creating a repository over a very slow connection. https://github.com/restic/restic/issues/3837 https://github.com/restic/restic/pull/3840 Changelog for restic 0.13.0 (2022-03-26) ======================================= The following sections list the changes in restic 0.13.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1106: Never lock repository for `list locks` * Fix #2345: Make cache crash-resistant and usable by multiple concurrent processes * Fix #2452: Improve error handling of repository locking * Fix #2738: Don't print progress for `backup --json --quiet` * Fix #3382: Make `check` command honor `RESTIC_CACHE_DIR` environment variable * Fix #3488: `rebuild-index` failed if an index file was damaged * Fix #3518: Make `copy` command honor `--no-lock` for source repository * Fix #3556: Fix hang with Backblaze B2 on SSL certificate authority error * Fix #3591: Fix handling of `prune --max-repack-size=0` * Fix #3601: Fix rclone backend prematurely exiting when receiving SIGINT on Windows * Fix #3619: Avoid choosing parent snapshots newer than time of new snapshot * Fix #3667: The `mount` command now reports symlinks sizes * Chg #3519: Require Go 1.14 or newer * Chg #3641: Ignore parent snapshot for `backup --stdin` * Enh #233: Support negative include/exclude patterns * Enh #1542: Add `--dry-run`/`-n` option to `backup` command * Enh #2202: Add upload checksum for Azure, GS, S3 and Swift backends * Enh #2388: Add warning for S3 if partial credentials are provided * Enh #2508: Support JSON output and quiet mode for the `diff` command * Enh #2594: Speed up the `restore --verify` command * Enh #2656: Add flag to disable TLS verification for self-signed certificates * Enh #2816: The `backup` command no longer updates file access times on Linux * Enh #2880: Make `recover` collect only unreferenced trees * Enh #3003: Atomic uploads for the SFTP backend * Enh #3127: Add xattr (extended attributes) support for Solaris * Enh #3429: Verify that new or modified keys are stored correctly * Enh #3436: Improve local backend's resilience to (system) crashes * Enh #3464: Skip lock creation on `forget` if `--no-lock` and `--dry-run` * Enh #3490: Support random subset by size in `check --read-data-subset` * Enh #3508: Cache blobs read by the `dump` command * Enh #3511: Support configurable timeout for the rclone backend * Enh #3541: Improve handling of temporary B2 delete errors * Enh #3542: Add file mode in symbolic notation to `ls --json` * Enh #3593: Improve `copy` performance by parallelizing IO Details ------- * Bugfix #1106: Never lock repository for `list locks` The `list locks` command previously locked to the repository by default. This had the problem that it wouldn't work for an exclusively locked repository and that the command would also display its own lock file which can be confusing. Now, the `list locks` command never locks the repository. https://github.com/restic/restic/issues/1106 https://github.com/restic/restic/pull/3665 * Bugfix #2345: Make cache crash-resistant and usable by multiple concurrent processes The restic cache directory (`RESTIC_CACHE_DIR`) could end up in a broken state in the event of restic (or the OS) crashing. This is now less likely to occur as files are downloaded to a temporary location before being moved to their proper location. This also allows multiple concurrent restic processes to operate on a single repository without conflicts. Previously, concurrent operations could cause segfaults because the processes saw each other's partially downloaded files. https://github.com/restic/restic/issues/2345 https://github.com/restic/restic/pull/2838 * Bugfix #2452: Improve error handling of repository locking Previously, when the lock refresh failed to delete the old lock file, it forgot about the newly created one. Instead it continued trying to delete the old (usually no longer existing) lock file and thus over time lots of lock files accumulated. This has now been fixed. https://github.com/restic/restic/issues/2452 https://github.com/restic/restic/issues/2473 https://github.com/restic/restic/issues/2562 https://github.com/restic/restic/pull/3512 * Bugfix #2738: Don't print progress for `backup --json --quiet` Unlike the text output, the `--json` output format still printed progress information even in `--quiet` mode. This has now been fixed by always disabling the progress output in quiet mode. https://github.com/restic/restic/issues/2738 https://github.com/restic/restic/pull/3264 * Bugfix #3382: Make `check` command honor `RESTIC_CACHE_DIR` environment variable Previously, the `check` command didn't honor the `RESTIC_CACHE_DIR` environment variable, which caused problems in certain system/usage configurations. This has now been fixed. https://github.com/restic/restic/issues/3382 https://github.com/restic/restic/pull/3474 * Bugfix #3488: `rebuild-index` failed if an index file was damaged Previously, the `rebuild-index` command would fail with an error if an index file was damaged or truncated. This has now been fixed. On older restic versions, a (slow) workaround is to use `rebuild-index --read-all-packs` or to manually delete the damaged index. https://github.com/restic/restic/pull/3488 * Bugfix #3518: Make `copy` command honor `--no-lock` for source repository The `copy` command previously did not respect the `--no-lock` option for the source repository, causing failures with read-only storage backends. This has now been fixed such that the option is now respected. https://github.com/restic/restic/issues/3518 https://github.com/restic/restic/pull/3589 * Bugfix #3556: Fix hang with Backblaze B2 on SSL certificate authority error Previously, if a request failed with an SSL unknown certificate authority error, the B2 backend retried indefinitely and restic would appear to hang. This has now been fixed and restic instead fails with an error message. https://github.com/restic/restic/issues/3556 https://github.com/restic/restic/issues/2355 https://github.com/restic/restic/pull/3571 * Bugfix #3591: Fix handling of `prune --max-repack-size=0` Restic ignored the `--max-repack-size` option when passing a value of 0. This has now been fixed. As a workaround, `--max-repack-size=1` can be used with older versions of restic. https://github.com/restic/restic/pull/3591 * Bugfix #3601: Fix rclone backend prematurely exiting when receiving SIGINT on Windows Previously, pressing Ctrl+C in a Windows console where restic was running with rclone as the backend would cause rclone to exit prematurely due to getting a `SIGINT` signal at the same time as restic. Restic would then wait for a long time for time with "unexpected EOF" and "rclone stdio connection already closed" errors. This has now been fixed by restic starting the rclone process detached from the console restic runs in (similar to starting processes in a new process group on Linux), which enables restic to gracefully clean up rclone (which now never gets the `SIGINT`). https://github.com/restic/restic/issues/3601 https://github.com/restic/restic/pull/3602 * Bugfix #3619: Avoid choosing parent snapshots newer than time of new snapshot The `backup` command, when a `--parent` was not provided, previously chose the most recent matching snapshot as the parent snapshot. However, this didn't make sense when the user passed `--time` to create a new snapshot older than the most recent snapshot. Instead, `backup` now chooses the most recent snapshot which is not newer than the snapshot-being-created's timestamp, to avoid any time travel. https://github.com/restic/restic/pull/3619 * Bugfix #3667: The `mount` command now reports symlinks sizes Symlinks used to have size zero in restic mountpoints, confusing some third-party tools. They now have a size equal to the byte length of their target path, as required by POSIX. https://github.com/restic/restic/issues/3667 https://github.com/restic/restic/pull/3668 * Change #3519: Require Go 1.14 or newer Restic now requires Go 1.14 to build. This allows it to use new standard library features instead of an external dependency. https://github.com/restic/restic/issues/3519 * Change #3641: Ignore parent snapshot for `backup --stdin` Restic uses a parent snapshot to speed up directory scanning when performing backups, but this only wasted time and memory when the backup source is stdin (using the `--stdin` option of the `backup` command), since no directory scanning is performed in this case. Snapshots made with `backup --stdin` no longer have a parent snapshot, which allows restic to skip some startup operations and saves a bit of resources. The `--parent` option is still available for `backup --stdin`, but is now ignored. https://github.com/restic/restic/issues/3641 https://github.com/restic/restic/pull/3645 * Enhancement #233: Support negative include/exclude patterns If a pattern starts with an exclamation mark and it matches a file that was previously matched by a regular pattern, the match is cancelled. Notably, this can be used with `--exclude-file` to cancel the exclusion of some files. It works similarly to `.gitignore`, with the same limitation; Once a directory is excluded, it is not possible to include files inside the directory. Example of use as an exclude pattern for the `backup` command: $HOME/**/* !$HOME/Documents !$HOME/code !$HOME/.emacs.d !$HOME/games # [...] node_modules *~ *.o *.lo *.pyc # [...] $HOME/code/linux/* !$HOME/code/linux/.git # [...] https://github.com/restic/restic/issues/233 https://github.com/restic/restic/pull/2311 * Enhancement #1542: Add `--dry-run`/`-n` option to `backup` command Testing exclude filters and other configuration options was error prone as wrong filters could cause files to be uploaded unintentionally. It was also not possible to estimate beforehand how much data would be uploaded. The `backup` command now has a `--dry-run`/`-n` option, which performs all the normal steps of a backup without actually writing anything to the repository. Passing -vv will log information about files that would be added, allowing for verification of source and exclusion options before running the real backup. https://github.com/restic/restic/issues/1542 https://github.com/restic/restic/pull/2308 https://github.com/restic/restic/pull/3210 https://github.com/restic/restic/pull/3300 * Enhancement #2202: Add upload checksum for Azure, GS, S3 and Swift backends Previously only the B2 and partially the Swift backends verified the integrity of uploaded (encrypted) files. The verification works by informing the backend about the expected hash of the uploaded file. The backend then verifies the upload and thereby rules out any data corruption during upload. We have now added upload checksums for the Azure, GS, S3 and Swift backends, which besides integrity checking for uploads also means that restic can now be used to store backups in S3 buckets which have Object Lock enabled. https://github.com/restic/restic/issues/2202 https://github.com/restic/restic/issues/2700 https://github.com/restic/restic/issues/3023 https://github.com/restic/restic/pull/3246 * Enhancement #2388: Add warning for S3 if partial credentials are provided Previously restic did not notify about incomplete credentials when using the S3 backend, instead just reporting access denied. Restic now checks that both the AWS key ID and secret environment variables are set before connecting to the remote server, and reports an error if not. https://github.com/restic/restic/issues/2388 https://github.com/restic/restic/pull/3532 * Enhancement #2508: Support JSON output and quiet mode for the `diff` command The `diff` command now supports outputting machine-readable output in JSON format. To enable this, pass the `--json` option to the command. To only print the summary and suppress detailed output, pass the `--quiet` option. https://github.com/restic/restic/issues/2508 https://github.com/restic/restic/pull/3592 * Enhancement #2594: Speed up the `restore --verify` command The `--verify` option lets the `restore` command verify the file content after it has restored a snapshot. The performance of this operation has now been improved by up to a factor of two. https://github.com/restic/restic/pull/2594 * Enhancement #2656: Add flag to disable TLS verification for self-signed certificates There is now an `--insecure-tls` global option in restic, which disables TLS verification for self-signed certificates in order to support some development workflows. https://github.com/restic/restic/issues/2656 https://github.com/restic/restic/pull/2657 * Enhancement #2816: The `backup` command no longer updates file access times on Linux When reading files during backup, restic used to cause the operating system to update the files' access times. Note that this did not apply to filesystems with disabled file access times. Restic now instructs the operating system not to update the file access time, if the user running restic is the file owner or has root permissions. https://github.com/restic/restic/pull/2816 * Enhancement #2880: Make `recover` collect only unreferenced trees Previously, the `recover` command used to generate a snapshot containing *all* root trees, even those which were already referenced by a snapshot. This has been improved such that it now only processes trees not already referenced by any snapshot. https://github.com/restic/restic/pull/2880 * Enhancement #3003: Atomic uploads for the SFTP backend The SFTP backend did not upload files atomically. An interrupted upload could leave an incomplete file behind which could prevent restic from accessing the repository. This has now been fixed and uploads in the SFTP backend are done atomically. https://github.com/restic/restic/issues/3003 https://github.com/restic/restic/pull/3524 * Enhancement #3127: Add xattr (extended attributes) support for Solaris Restic now supports xattr for the Solaris operating system. https://github.com/restic/restic/issues/3127 https://github.com/restic/restic/pull/3628 * Enhancement #3429: Verify that new or modified keys are stored correctly When adding a new key or changing the password of a key, restic used to just create the new key (and remove the old one, when changing the password). There was no verification that the new key was stored correctly and works properly. As the repository cannot be decrypted without a valid key file, this could in rare cases cause the repository to become inaccessible. Restic now checks that new key files actually work before continuing. This can protect against some (rare) cases of hardware or storage problems. https://github.com/restic/restic/pull/3429 * Enhancement #3436: Improve local backend's resilience to (system) crashes Restic now ensures that files stored using the `local` backend are created atomically (that is, files are either stored completely or not at all). This ensures that no incomplete files are left behind even if restic is terminated while writing a file. In addition, restic now tries to ensure that the directory in the repository which contains a newly uploaded file is also written to disk. This can prevent missing files if the system crashes or the disk is not properly unmounted. https://github.com/restic/restic/pull/3436 * Enhancement #3464: Skip lock creation on `forget` if `--no-lock` and `--dry-run` Restic used to silently ignore the `--no-lock` option of the `forget` command. It now skips creation of lock file in case both `--dry-run` and `--no-lock` are specified. If `--no-lock` option is specified without `--dry-run`, restic prints a warning message to stderr. https://github.com/restic/restic/issues/3464 https://github.com/restic/restic/pull/3623 * Enhancement #3490: Support random subset by size in `check --read-data-subset` The `--read-data-subset` option of the `check` command now supports a third way of specifying the subset to check, namely `nS` where `n` is a size in bytes with suffix `S` as k/K, m/M, g/G or t/T. https://github.com/restic/restic/issues/3490 https://github.com/restic/restic/pull/3548 * Enhancement #3508: Cache blobs read by the `dump` command When dumping a file using the `dump` command, restic did not cache blobs in any way, so even consecutive runs of the same blob were loaded from the repository again and again, slowing down the dump. Now, the caching mechanism already used by the `fuse` command is also used by the `dump` command. This makes dumping much faster, especially for sparse files. https://github.com/restic/restic/pull/3508 * Enhancement #3511: Support configurable timeout for the rclone backend A slow rclone backend could cause restic to time out while waiting for the repository to open. Restic now offers an `-o rclone.timeout` option to make this timeout configurable. https://github.com/restic/restic/issues/3511 https://github.com/restic/restic/pull/3514 * Enhancement #3541: Improve handling of temporary B2 delete errors Deleting files on B2 could sometimes fail temporarily, which required restic to retry the delete operation. In some cases the file was deleted nevertheless, causing the retries and ultimately the restic command to fail. This has now been fixed. https://github.com/restic/restic/issues/3541 https://github.com/restic/restic/pull/3544 * Enhancement #3542: Add file mode in symbolic notation to `ls --json` The `ls --json` command now provides the file mode in symbolic notation (using the `permissions` key), aligned with `find --json`. https://github.com/restic/restic/issues/3542 https://github.com/restic/restic/pull/3573 https://forum.restic.net/t/restic-ls-understanding-file-mode-with-json/4371 * Enhancement #3593: Improve `copy` performance by parallelizing IO Restic copy previously only used a single thread for copying blobs between repositories, which resulted in limited performance when copying small blobs to/from a high latency backend (i.e. any remote backend, especially b2). Copying will now use 8 parallel threads to increase the throughput of the copy operation. https://github.com/restic/restic/pull/3593 Changelog for restic 0.12.1 (2021-08-03) ======================================= The following sections list the changes in restic 0.12.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #2742: Improve error handling for rclone and REST backend over HTTP2 * Fix #3111: Fix terminal output redirection for PowerShell * Fix #3184: `backup --quiet` no longer prints status information * Fix #3214: Treat an empty password as a fatal error for repository init * Fix #3267: `copy` failed to copy snapshots in rare cases * Fix #3296: Fix crash of `check --read-data-subset=x%` run for an empty repository * Fix #3302: Fix `fdopendir: not a directory` error for local backend * Fix #3305: Fix possibly missing backup summary of JSON output in case of error * Fix #3334: Print `created new cache` message only on a terminal * Fix #3380: Fix crash of `backup --exclude='**'` * Fix #3439: Correctly handle download errors during `restore` * Chg #3247: Empty files now have size of 0 in `ls --json` output * Enh #2780: Add release binaries for s390x architecture on Linux * Enh #3167: Allow specifying limit of `snapshots` list * Enh #3293: Add `--repository-file2` option to `init` and `copy` command * Enh #3312: Add auto-completion support for fish * Enh #3336: SFTP backend now checks for disk space * Enh #3377: Add release binaries for Apple Silicon * Enh #3414: Add `--keep-within-hourly` option to restic forget * Enh #3426: Optimize read performance of mount command * Enh #3427: `find --pack` fallback to index if data file is missing * Enh #3456: Support filtering and specifying untagged snapshots Details ------- * Bugfix #2742: Improve error handling for rclone and REST backend over HTTP2 When retrieving data from the rclone / REST backend while also using HTTP2 restic did not detect when no data was returned at all. This could cause for example the `check` command to report the following error: Pack ID does not match, want [...], got e3b0c442 This has been fixed by correctly detecting and retrying the incomplete download. https://github.com/restic/restic/issues/2742 https://github.com/restic/restic/pull/3453 https://forum.restic.net/t/http2-stream-closed-connection-reset-context-canceled/3743/10 * Bugfix #3111: Fix terminal output redirection for PowerShell When redirecting the output of restic using PowerShell on Windows, the output contained terminal escape characters. This has been fixed by properly detecting the terminal type. In addition, the mintty terminal now shows progress output for the backup command. https://github.com/restic/restic/issues/3111 https://github.com/restic/restic/pull/3325 * Bugfix #3184: `backup --quiet` no longer prints status information A regression in the latest restic version caused the output of `backup --quiet` to contain large amounts of backup progress information when run using an interactive terminal. This is fixed now. A workaround for this bug is to run restic as follows: `restic backup --quiet [..] | cat -`. https://github.com/restic/restic/issues/3184 https://github.com/restic/restic/pull/3186 * Bugfix #3214: Treat an empty password as a fatal error for repository init When attempting to initialize a new repository, if an empty password was supplied, the repository would be created but the init command would return an error with a stack trace. Now, if an empty password is provided, it is treated as a fatal error, and no repository is created. https://github.com/restic/restic/issues/3214 https://github.com/restic/restic/pull/3283 * Bugfix #3267: `copy` failed to copy snapshots in rare cases The `copy` command could in rare cases fail with the error message `SaveTree(...) returned unexpected id ...`. This has been fixed. On Linux/BSDs, the error could be caused by backing up symlinks with non-UTF-8 target paths. Note that, due to limitations in the repository format, these are not stored properly and should be avoided if possible. https://github.com/restic/restic/issues/3267 https://github.com/restic/restic/pull/3310 * Bugfix #3296: Fix crash of `check --read-data-subset=x%` run for an empty repository The command `restic check --read-data-subset=x%` crashed when run for an empty repository. This has been fixed. https://github.com/restic/restic/issues/3296 https://github.com/restic/restic/pull/3309 * Bugfix #3302: Fix `fdopendir: not a directory` error for local backend The `check`, `list packs`, `prune` and `rebuild-index` commands failed for the local backend when the `data` folder in the repository contained files. This has been fixed. https://github.com/restic/restic/issues/3302 https://github.com/restic/restic/pull/3308 * Bugfix #3305: Fix possibly missing backup summary of JSON output in case of error When using `--json` output it happened from time to time that the summary output was missing in case an error occurred. This has been fixed. https://github.com/restic/restic/pull/3305 * Bugfix #3334: Print `created new cache` message only on a terminal The message `created new cache` was printed even when the output wasn't a terminal. That broke piping `restic dump` output to tar or zip if cache directory didn't exist. The message is now only printed on a terminal. https://github.com/restic/restic/issues/3334 https://github.com/restic/restic/pull/3343 * Bugfix #3380: Fix crash of `backup --exclude='**'` The exclude filter `**`, which excludes all files, caused restic to crash. This has been corrected. https://github.com/restic/restic/issues/3380 https://github.com/restic/restic/pull/3393 * Bugfix #3439: Correctly handle download errors during `restore` Due to a regression in restic 0.12.0, the `restore` command in some cases did not retry download errors and only printed a warning. This has been fixed by retrying incomplete data downloads. https://github.com/restic/restic/issues/3439 https://github.com/restic/restic/pull/3449 * Change #3247: Empty files now have size of 0 in `ls --json` output The `ls --json` command used to omit the sizes of empty files in its output. It now reports a size of zero explicitly for regular files, while omitting the size field for all other types. https://github.com/restic/restic/issues/3247 https://github.com/restic/restic/pull/3257 * Enhancement #2780: Add release binaries for s390x architecture on Linux We've added release binaries for Linux using the s390x architecture. https://github.com/restic/restic/issues/2780 https://github.com/restic/restic/pull/3452 * Enhancement #3167: Allow specifying limit of `snapshots` list The `--last` option allowed limiting the output of the `snapshots` command to the latest snapshot for each host. The new `--latest n` option allows limiting the output to the latest `n` snapshots. This change deprecates the option `--last` in favour of `--latest 1`. https://github.com/restic/restic/pull/3167 * Enhancement #3293: Add `--repository-file2` option to `init` and `copy` command The `init` and `copy` command can now be used with the `--repository-file2` option or the `$RESTIC_REPOSITORY_FILE2` environment variable. These to options are in addition to the `--repo2` flag and allow you to read the destination repository from a file. Using both `--repository-file` and `--repo2` options resulted in an error for the `copy` or `init` command. The handling of this combination of options has been fixed. A workaround for this issue is to only use `--repo` or `-r` and `--repo2` for `init` or `copy`. https://github.com/restic/restic/issues/3293 https://github.com/restic/restic/pull/3294 * Enhancement #3312: Add auto-completion support for fish The `generate` command now supports fish auto completion. https://github.com/restic/restic/pull/3312 * Enhancement #3336: SFTP backend now checks for disk space Backing up over SFTP previously spewed multiple generic "failure" messages when the remote disk was full. It now checks for disk space before writing a file and fails immediately with a "no space left on device" message. https://github.com/restic/restic/issues/3336 https://github.com/restic/restic/pull/3345 * Enhancement #3377: Add release binaries for Apple Silicon We've added release binaries for macOS on Apple Silicon (M1). https://github.com/restic/restic/issues/3377 https://github.com/restic/restic/pull/3394 * Enhancement #3414: Add `--keep-within-hourly` option to restic forget The `forget` command allowed keeping a given number of hourly backups or to keep all backups within a given interval, but it was not possible to specify keeping hourly backups within a given interval. The new `--keep-within-hourly` option now offers this functionality. Similar options for daily/weekly/monthly/yearly are also implemented, the new options are: --keep-within-hourly <1y2m3d4h> --keep-within-daily <1y2m3d4h> --keep-within-weekly <1y2m3d4h> --keep-within-monthly <1y2m3d4h> --keep-within-yearly <1y2m3d4h> https://github.com/restic/restic/issues/3414 https://github.com/restic/restic/pull/3416 https://forum.restic.net/t/forget-policy/4014/11 * Enhancement #3426: Optimize read performance of mount command Reading large files in a mounted repository may be up to five times faster. This improvement primarily applies to repositories stored at a backend that can be accessed with low latency, like e.g. the local backend. https://github.com/restic/restic/pull/3426 * Enhancement #3427: `find --pack` fallback to index if data file is missing When investigating a repository with missing data files, it might be useful to determine affected snapshots before running `rebuild-index`. Previously, `find --pack pack-id` returned no data as it required accessing the data file. Now, if the necessary data is still available in the repository index, it gets retrieved from there. The command now also supports looking up multiple pack files in a single `find` run. https://github.com/restic/restic/pull/3427 https://forum.restic.net/t/missing-packs-not-found/2600 * Enhancement #3456: Support filtering and specifying untagged snapshots It was previously not possible to specify an empty tag with the `--tag` and `--keep-tag` options. This has now been fixed, such that `--tag ''` and `--keep-tag ''` now matches snapshots without tags. This allows e.g. the `snapshots` and `forget` commands to only operate on untagged snapshots. https://github.com/restic/restic/issues/3456 https://github.com/restic/restic/pull/3457 Changelog for restic 0.12.0 (2021-02-14) ======================================= The following sections list the changes in restic 0.12.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1681: Make `mount` not create missing mount point directory * Fix #1800: Ignore `no data available` filesystem error during backup * Fix #2563: Report the correct owner of directories in FUSE mounts * Fix #2688: Make `backup` and `tag` commands separate tags by comma * Fix #2739: Make the `cat` command respect the `--no-lock` option * Fix #3014: Fix sporadic stream reset between rclone and restic * Fix #3087: The `--use-fs-snapshot` option now works on windows/386 * Fix #3100: Do not require gs bucket permissions when running `init` * Fix #3111: Correctly detect output redirection for `backup` command on Windows * Fix #3151: Don't create invalid snapshots when `backup` is interrupted * Fix #3152: Do not hang until foregrounded when completed in background * Fix #3166: Improve error handling in the `restore` command * Fix #3232: Correct statistics for overlapping targets * Fix #3249: Improve error handling in `gs` backend * Chg #3095: Deleting files on Google Drive now moves them to the trash * Enh #909: Back up mountpoints as empty directories * Enh #2186: Allow specifying percentage in `check --read-data-subset` * Enh #2433: Make the `dump` command support `zip` format * Enh #2453: Report permanent/fatal backend errors earlier * Enh #2495: Add option to let `backup` trust mtime without checking ctime * Enh #2528: Add Alibaba/Aliyun OSS support in the `s3` backend * Enh #2706: Configurable progress reports for non-interactive terminals * Enh #2718: Improve `prune` performance and make it more customizable * Enh #2941: Speed up the repacking step of the `prune` command * Enh #2944: Add `backup` options `--files-from-{verbatim,raw}` * Enh #3006: Speed up the `rebuild-index` command * Enh #3048: Add more checks for index and pack files in the `check` command * Enh #3083: Allow usage of deprecated S3 `ListObjects` API * Enh #3099: Reduce memory usage of `check` command * Enh #3106: Parallelize scan of snapshot content in `copy` and `prune` * Enh #3130: Parallelize reading of locks and snapshots * Enh #3147: Support additional environment variables for Swift authentication * Enh #3191: Add release binaries for MIPS architectures * Enh #3250: Add several more error checks * Enh #3254: Enable HTTP/2 for backend connections Details ------- * Bugfix #1681: Make `mount` not create missing mount point directory When specifying a non-existent directory as mount point for the `mount` command, restic used to create the specified directory automatically. This has now changed such that restic instead gives an error when the specified directory for the mount point does not exist. https://github.com/restic/restic/issues/1681 https://github.com/restic/restic/pull/3008 * Bugfix #1800: Ignore `no data available` filesystem error during backup Restic was unable to backup files on some filesystems, for example certain configurations of CIFS on Linux which return a `no data available` error when reading extended attributes. These errors are now ignored. https://github.com/restic/restic/issues/1800 https://github.com/restic/restic/pull/3034 * Bugfix #2563: Report the correct owner of directories in FUSE mounts Restic 0.10.0 changed the FUSE mount to always report the current user as the owner of directories within the FUSE mount, which is incorrect. This is now changed back to reporting the correct owner of a directory. https://github.com/restic/restic/issues/2563 https://github.com/restic/restic/pull/3141 * Bugfix #2688: Make `backup` and `tag` commands separate tags by comma Running `restic backup --tag foo,bar` previously created snapshots with one single tag containing a comma (`foo,bar`) instead of two tags (`foo`, `bar`). Similarly, the `tag` command's `--set`, `--add` and `--remove` options would treat `foo,bar` as one tag instead of two tags. This was inconsistent with other commands and often unexpected when one intended `foo,bar` to mean two tags. To be consistent in all commands, restic now interprets `foo,bar` to mean two separate tags (`foo` and `bar`) instead of one tag (`foo,bar`) everywhere, including in the `backup` and `tag` commands. NOTE: This change might result in unexpected behavior in cases where you use the `forget` command and filter on tags like `foo,bar`. Snapshots previously backed up with `--tag foo,bar` will still not match that filter, but snapshots saved from now on will match that filter. To replace `foo,bar` tags with `foo` and `bar` tags in old snapshots, you can first generate a list of the relevant snapshots using a command like: Restic snapshots --json --quiet | jq '.[] | select(contains({tags: ["foo,bar"]})) | .id' And then use `restic tag --set foo --set bar snapshotID [...]` to set the new tags. Please adjust the commands to include real tag names and any additional tags, as well as the list of snapshots to process. https://github.com/restic/restic/issues/2688 https://github.com/restic/restic/pull/2690 https://github.com/restic/restic/pull/3197 * Bugfix #2739: Make the `cat` command respect the `--no-lock` option The `cat` command would not respect the `--no-lock` flag. This is now fixed. https://github.com/restic/restic/issues/2739 * Bugfix #3014: Fix sporadic stream reset between rclone and restic Sometimes when using restic with the `rclone` backend, an error message similar to the following would be printed: Didn't finish writing GET request (wrote 0/xxx): http2: stream closed It was found that this was caused by restic closing the connection to rclone to soon when downloading data. A workaround has been added which waits for the end of the download before closing the connection. https://github.com/rclone/rclone/issues/2598 https://github.com/restic/restic/pull/3014 * Bugfix #3087: The `--use-fs-snapshot` option now works on windows/386 Restic failed to create VSS snapshots on windows/386 with the following error: GetSnapshotProperties() failed: E_INVALIDARG (0x80070057) This is now fixed. https://github.com/restic/restic/issues/3087 https://github.com/restic/restic/pull/3090 * Bugfix #3100: Do not require gs bucket permissions when running `init` Restic used to require bucket level permissions for the `gs` backend in order to initialize a restic repository. It now allows a `gs` service account to initialize a repository if the bucket does exist and the service account has permissions to write/read to that bucket. https://github.com/restic/restic/issues/3100 * Bugfix #3111: Correctly detect output redirection for `backup` command on Windows On Windows, since restic 0.10.0 the `backup` command did not properly detect when the output was redirected to a file. This caused restic to output terminal control characters. This has been fixed by correcting the terminal detection. https://github.com/restic/restic/issues/3111 https://github.com/restic/restic/pull/3150 * Bugfix #3151: Don't create invalid snapshots when `backup` is interrupted When canceling a backup run at a certain moment it was possible that restic created a snapshot with an invalid "null" tree. This caused `check` and other operations to fail. The `backup` command now properly handles interruptions and never saves a snapshot when interrupted. https://github.com/restic/restic/issues/3151 https://github.com/restic/restic/pull/3164 * Bugfix #3152: Do not hang until foregrounded when completed in background On Linux, when running in the background restic failed to stop the terminal output of the `backup` command after it had completed. This caused restic to hang until moved to the foreground. This has now been fixed. https://github.com/restic/restic/pull/3152 https://forum.restic.net/t/restic-alpine-container-cron-hangs-epoll-pwait/3334 * Bugfix #3166: Improve error handling in the `restore` command The `restore` command used to not print errors while downloading file contents from the repository. It also incorrectly exited with a zero error code even when there were errors during the restore process. This has all been fixed and `restore` now returns with a non-zero exit code when there's an error. https://github.com/restic/restic/issues/3166 https://github.com/restic/restic/pull/3207 * Bugfix #3232: Correct statistics for overlapping targets A user reported that restic's statistics and progress information during backup was not correctly calculated when the backup targets (files/dirs to save) overlap. For example, consider a directory `foo` which contains (among others) a file `foo/bar`. When `restic backup foo foo/bar` was run, restic counted the size of the file `foo/bar` twice, so the completeness percentage as well as the number of files was wrong. This is now corrected. https://github.com/restic/restic/issues/3232 https://github.com/restic/restic/pull/3243 * Bugfix #3249: Improve error handling in `gs` backend The `gs` backend did not notice when the last step of completing a file upload failed. Under rare circumstances, this could cause missing files in the backup repository. This has now been fixed. https://github.com/restic/restic/pull/3249 * Change #3095: Deleting files on Google Drive now moves them to the trash When deleting files on Google Drive via the `rclone` backend, restic used to bypass the trash folder required that one used the `-o rclone.args` option to enable usage of the trash folder. This ensured that deleted files in Google Drive were not kept indefinitely in the trash folder. However, since Google Drive's trash retention policy changed to deleting trashed files after 30 days, this is no longer needed. Restic now leaves it up to rclone and its configuration to use or not use the trash folder when deleting files. The default is to use the trash folder, as of rclone 1.53.2. To re-enable the restic 0.11 behavior, set the `RCLONE_DRIVE_USE_TRASH` environment variable or change the rclone configuration. See the rclone documentation for more details. https://github.com/restic/restic/issues/3095 https://github.com/restic/restic/pull/3102 * Enhancement #909: Back up mountpoints as empty directories When the `--one-file-system` option is specified to `restic backup`, it ignores all file systems mounted below one of the target directories. This means that when a snapshot is restored, users needed to manually recreate the mountpoint directories. Restic now backs up mountpoints as empty directories and therefore implements the same approach as `tar`. https://github.com/restic/restic/issues/909 https://github.com/restic/restic/pull/3119 * Enhancement #2186: Allow specifying percentage in `check --read-data-subset` We've enhanced the `check` command's `--read-data-subset` option to also accept a percentage (e.g. `2.5%` or `10%`). This will check the given percentage of pack files (which are randomly selected on each run). https://github.com/restic/restic/issues/2186 https://github.com/restic/restic/pull/3038 * Enhancement #2433: Make the `dump` command support `zip` format Previously, restic could dump the contents of a whole folder structure only in the `tar` format. The `dump` command now has a new flag to change output format to `zip`. Just pass `--archive zip` as an option to `restic dump`. https://github.com/restic/restic/pull/2433 https://github.com/restic/restic/pull/3081 * Enhancement #2453: Report permanent/fatal backend errors earlier When encountering errors in reading from or writing to storage backends, restic retries the failing operation up to nine times (for a total of ten attempts). It used to retry all backend operations, but now detects some permanent error conditions so that it can report fatal errors earlier. Permanent failures include local disks being full, SSH connections dropping and permission errors. https://github.com/restic/restic/issues/2453 https://github.com/restic/restic/issues/3180 https://github.com/restic/restic/pull/3170 https://github.com/restic/restic/pull/3181 * Enhancement #2495: Add option to let `backup` trust mtime without checking ctime The `backup` command used to require that both `ctime` and `mtime` of a file matched with a previously backed up version to determine that the file was unchanged. In other words, if either `ctime` or `mtime` of the file had changed, it would be considered changed and restic would read the file's content again to back up the relevant (changed) parts of it. The new option `--ignore-ctime` makes restic look at `mtime` only, such that `ctime` changes for a file does not cause restic to read the file's contents again. The check for both `ctime` and `mtime` was introduced in restic 0.9.6 to make backups more reliable in the face of programs that reset `mtime` (some Unix archivers do that), but it turned out to often be expensive because it made restic read file contents even if only the metadata (owner, permissions) of a file had changed. The new `--ignore-ctime` option lets the user restore the 0.9.5 behavior when needed. The existing `--ignore-inode` option already turned off this behavior, but also removed a different check. Please note that changes in files' metadata are still recorded, regardless of the command line options provided to the backup command. https://github.com/restic/restic/issues/2495 https://github.com/restic/restic/issues/2558 https://github.com/restic/restic/issues/2819 https://github.com/restic/restic/pull/2823 * Enhancement #2528: Add Alibaba/Aliyun OSS support in the `s3` backend A new extended option `s3.bucket-lookup` has been added to support Alibaba/Aliyun OSS in the `s3` backend. The option can be set to one of the following values: - `auto` - Existing behaviour - `dns` - Use DNS style bucket access - `path` - Use path style bucket access To make the `s3` backend work with Alibaba/Aliyun OSS you must set `s3.bucket-lookup` to `dns` and set the `s3.region` parameter. For example: Restic -o s3.bucket-lookup=dns -o s3.region=oss-eu-west-1 -r s3:https://oss-eu-west-1.aliyuncs.com/bucketname init Note that `s3.region` must be set, otherwise the MinIO SDK tries to look it up and it seems that Alibaba doesn't support that properly. https://github.com/restic/restic/issues/2528 https://github.com/restic/restic/pull/2535 * Enhancement #2706: Configurable progress reports for non-interactive terminals The `backup`, `check` and `prune` commands never printed any progress reports on non-interactive terminals. This behavior is now configurable using the `RESTIC_PROGRESS_FPS` environment variable. Use for example a value of `1` for an update every second, or `0.01666` for an update every minute. The `backup` command now also prints the current progress when restic receives a `SIGUSR1` signal. Setting the `RESTIC_PROGRESS_FPS` environment variable or sending a `SIGUSR1` signal prints a status report even when `--quiet` was specified. https://github.com/restic/restic/issues/2706 https://github.com/restic/restic/issues/3194 https://github.com/restic/restic/pull/3199 * Enhancement #2718: Improve `prune` performance and make it more customizable The `prune` command is now much faster. This is especially the case for remote repositories or repositories with not much data to remove. Also the memory usage of the `prune` command is now reduced. Restic used to rebuild the index from scratch after pruning. This could lead to missing packs in the index in some cases for eventually consistent backends such as e.g. AWS S3. This behavior is now changed and the index rebuilding uses the information already known by `prune`. By default, the `prune` command no longer removes all unused data. This behavior can be fine-tuned by new options, like the acceptable amount of unused space or the maximum size of data to reorganize. For more details, please see https://restic.readthedocs.io/en/stable/060_forget.html . Moreover, `prune` now accepts the `--dry-run` option and also running `forget --dry-run --prune` will show what `prune` would do. This enhancement also fixes several open issues, e.g.: - https://github.com/restic/restic/issues/1140 - https://github.com/restic/restic/issues/1599 - https://github.com/restic/restic/issues/1985 - https://github.com/restic/restic/issues/2112 - https://github.com/restic/restic/issues/2227 - https://github.com/restic/restic/issues/2305 https://github.com/restic/restic/pull/2718 https://github.com/restic/restic/pull/2842 * Enhancement #2941: Speed up the repacking step of the `prune` command The repack step of the `prune` command, which moves still used file parts into new pack files such that the old ones can be garbage collected later on, now processes multiple pack files in parallel. This is especially beneficial for high latency backends or when using a fast network connection. https://github.com/restic/restic/pull/2941 * Enhancement #2944: Add `backup` options `--files-from-{verbatim,raw}` The new `backup` options `--files-from-verbatim` and `--files-from-raw` read a list of files to back up from a file. Unlike the existing `--files-from` option, these options do not interpret the listed filenames as glob patterns; instead, whitespace in filenames is preserved as-is and no pattern expansion is done. Please see the documentation for specifics. These new options are highly recommended over `--files-from`, when using a script to generate the list of files to back up. https://github.com/restic/restic/issues/2944 https://github.com/restic/restic/issues/3013 * Enhancement #3006: Speed up the `rebuild-index` command We've optimized the `rebuild-index` command. Now, existing index entries are used to minimize the number of pack files that must be read. This speeds up the index rebuild a lot. Additionally, the option `--read-all-packs` has been added, implementing the previous behavior. https://github.com/restic/restic/pull/3006 https://github.com/restic/restic/issue/2547 * Enhancement #3048: Add more checks for index and pack files in the `check` command The `check` command run with the `--read-data` or `--read-data-subset` options used to only verify only the pack file content - it did not check if the blobs within the pack are correctly contained in the index. A check for the latter is now in place, which can print the following error: Blob ID is not contained in index or position is incorrect Another test is also added, which compares pack file sizes computed from the index and the pack header with the actual file size. This test is able to detect truncated pack files. If the index is not correct, it can be rebuilt by using the `rebuild-index` command. Having added these tests, `restic check` is now able to detect non-existing blobs which are wrongly referenced in the index. This situation could have lead to missing data. https://github.com/restic/restic/pull/3048 https://github.com/restic/restic/pull/3082 * Enhancement #3083: Allow usage of deprecated S3 `ListObjects` API Some S3 API implementations, e.g. Ceph before version 14.2.5, have a broken `ListObjectsV2` implementation which causes problems for restic when using their API endpoints. When a broken server implementation is used, restic prints errors similar to the following: List() returned error: Truncated response should have continuation token set As a temporary workaround, restic now allows using the older `ListObjects` endpoint by setting the `s3.list-objects-v1` extended option, for instance: Restic -o s3.list-objects-v1=true snapshots Please note that this option may be removed in future versions of restic. https://github.com/restic/restic/issues/3083 https://github.com/restic/restic/pull/3085 * Enhancement #3099: Reduce memory usage of `check` command The `check` command now requires less memory if it is run without the `--check-unused` option. https://github.com/restic/restic/pull/3099 * Enhancement #3106: Parallelize scan of snapshot content in `copy` and `prune` The `copy` and `prune` commands used to traverse the directories of snapshots one by one to find used data. This snapshot traversal is now parallized which can speed up this step several times. In addition the `check` command now reports how many snapshots have already been processed. https://github.com/restic/restic/pull/3106 * Enhancement #3130: Parallelize reading of locks and snapshots Restic used to read snapshots sequentially. For repositories containing many snapshots this slowed down commands which have to read all snapshots. Now the reading of snapshots is parallelized. This speeds up for example `prune`, `backup` and other commands that search for snapshots with certain properties or which have to find the `latest` snapshot. The speed up also applies to locks stored in the backup repository. https://github.com/restic/restic/pull/3130 https://github.com/restic/restic/pull/3174 * Enhancement #3147: Support additional environment variables for Swift authentication The `swift` backend now supports the following additional environment variables for passing authentication details to restic: `OS_USER_ID`, `OS_USER_DOMAIN_ID`, `OS_PROJECT_DOMAIN_ID` and `OS_TRUST_ID` Depending on the `openrc` configuration file these might be required when the user and project domains differ from one another. https://github.com/restic/restic/issues/3147 https://github.com/restic/restic/pull/3158 * Enhancement #3191: Add release binaries for MIPS architectures We've added a few new architectures for Linux to the release binaries: `mips`, `mipsle`, `mips64`, and `mip64le`. MIPS is mostly used for low-end embedded systems. https://github.com/restic/restic/issues/3191 https://github.com/restic/restic/pull/3208 * Enhancement #3250: Add several more error checks We've added a lot more error checks in places where errors were previously ignored (as hinted by the static analysis program `errcheck` via `golangci-lint`). https://github.com/restic/restic/pull/3250 * Enhancement #3254: Enable HTTP/2 for backend connections Go's HTTP library usually automatically chooses between HTTP/1.x and HTTP/2 depending on what the server supports. But for compatibility this mechanism is disabled if DialContext is used (which is the case for restic). This change allows restic's HTTP client to negotiate HTTP/2 if supported by the server. https://github.com/restic/restic/pull/3254 Changelog for restic 0.11.0 (2020-11-05) ======================================= The following sections list the changes in restic 0.11.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1212: Restore timestamps and permissions on intermediate directories * Fix #1756: Mark repository files as read-only when using the local backend * Fix #2241: Hide password in REST backend repository URLs * Fix #2319: Correctly dump directories into tar files * Fix #2491: Don't require `self-update --output` placeholder file * Fix #2834: Fix rare cases of backup command hanging forever * Fix #2938: Fix manpage formatting * Fix #2942: Make --exclude-larger-than handle disappearing files * Fix #2951: Restic generate, help and self-update no longer check passwords * Fix #2979: Make snapshots --json output [] instead of null when no snapshots * Enh #340: Add support for Volume Shadow Copy Service (VSS) on Windows * Enh #1458: New option --repository-file * Enh #2849: Authenticate to Google Cloud Storage with access token * Enh #2969: Optimize check for unchanged files during backup * Enh #2978: Warn if parent snapshot cannot be loaded during backup Details ------- * Bugfix #1212: Restore timestamps and permissions on intermediate directories When using the `--include` option of the restore command, restic restored timestamps and permissions only on directories selected by the include pattern. Intermediate directories, which are necessary to restore files located in sub- directories, were created with default permissions. We've fixed the restore command to restore timestamps and permissions for these directories as well. https://github.com/restic/restic/issues/1212 https://github.com/restic/restic/issues/1402 https://github.com/restic/restic/pull/2906 * Bugfix #1756: Mark repository files as read-only when using the local backend Files stored in a local repository were marked as writeable on the filesystem for non-Windows systems, which did not prevent accidental file modifications outside of restic. In addition, the local backend did not work with certain filesystems and network mounts which do not permit modifications of file permissions. Restic now marks files stored in a local repository as read-only on the filesystem on non-Windows systems. The error handling is improved to support more filesystems. https://github.com/restic/restic/issues/1756 https://github.com/restic/restic/issues/2157 https://github.com/restic/restic/pull/2989 * Bugfix #2241: Hide password in REST backend repository URLs When using a password in the REST backend repository URL, the password could in some cases be included in the output from restic, e.g. when initializing a repo or during an error. The password is now replaced with "***" where applicable. https://github.com/restic/restic/issues/2241 https://github.com/restic/restic/pull/2658 * Bugfix #2319: Correctly dump directories into tar files The dump command previously wrote directories in a tar file in a way which can cause compatibility problems. This caused, for example, 7zip on Windows to not open tar files containing directories. In addition it was not possible to dump directories with extended attributes. These compatibility problems are now corrected. In addition, a tar file now includes the name of the owner and group of a file. https://github.com/restic/restic/issues/2319 https://github.com/restic/restic/pull/3039 * Bugfix #2491: Don't require `self-update --output` placeholder file `restic self-update --output /path/to/new-restic` used to require that new-restic was an existing file, to be overwritten. Now it's possible to download an updated restic binary to a new path, without first having to create a placeholder file. https://github.com/restic/restic/issues/2491 https://github.com/restic/restic/pull/2937 * Bugfix #2834: Fix rare cases of backup command hanging forever We've fixed an issue with the backup progress reporting which could cause restic to hang forever right before finishing a backup. https://github.com/restic/restic/issues/2834 https://github.com/restic/restic/pull/2963 * Bugfix #2938: Fix manpage formatting The manpage formatting in restic v0.10.0 was garbled, which is fixed now. https://github.com/restic/restic/issues/2938 https://github.com/restic/restic/pull/2977 * Bugfix #2942: Make --exclude-larger-than handle disappearing files There was a small bug in the backup command's --exclude-larger-than option where files that disappeared between scanning and actually backing them up to the repository caused a panic. This is now fixed. https://github.com/restic/restic/issues/2942 * Bugfix #2951: Restic generate, help and self-update no longer check passwords The commands `restic cache`, `generate`, `help` and `self-update` don't need passwords, but they previously did run the RESTIC_PASSWORD_COMMAND (if set in the environment), prompting users to authenticate for no reason. They now skip running the password command. https://github.com/restic/restic/issues/2951 https://github.com/restic/restic/pull/2987 * Bugfix #2979: Make snapshots --json output [] instead of null when no snapshots Restic previously output `null` instead of `[]` for the `--json snapshots` command, when there were no snapshots in the repository. This caused some minor problems when parsing the output, but is now fixed such that `[]` is output when the list of snapshots is empty. https://github.com/restic/restic/issues/2979 https://github.com/restic/restic/pull/2984 * Enhancement #340: Add support for Volume Shadow Copy Service (VSS) on Windows Volume Shadow Copy Service allows read access to files that are locked by another process using an exclusive lock through a filesystem snapshot. Restic was unable to backup those files before. This update enables backing up these files. This needs to be enabled explicitely using the --use-fs-snapshot option of the backup command. https://github.com/restic/restic/issues/340 https://github.com/restic/restic/pull/2274 * Enhancement #1458: New option --repository-file We've added a new command-line option --repository-file as an alternative to -r. This allows to read the repository URL from a file in order to prevent certain types of information leaks, especially for URLs containing credentials. https://github.com/restic/restic/issues/1458 https://github.com/restic/restic/issues/2900 https://github.com/restic/restic/pull/2910 * Enhancement #2849: Authenticate to Google Cloud Storage with access token When using the GCS backend, it is now possible to authenticate with OAuth2 access tokens instead of a credentials file by setting the GOOGLE_ACCESS_TOKEN environment variable. https://github.com/restic/restic/pull/2849 * Enhancement #2969: Optimize check for unchanged files during backup During a backup restic skips processing files which have not changed since the last backup run. Previously this required opening each file once which can be slow on network filesystems. The backup command now checks for file changes before opening a file. This considerably reduces the time to create a backup on network filesystems. https://github.com/restic/restic/issues/2969 https://github.com/restic/restic/pull/2970 * Enhancement #2978: Warn if parent snapshot cannot be loaded during backup During a backup restic uses the parent snapshot to check whether a file was changed and has to be backed up again. For this check the backup has to read the directories contained in the old snapshot. If a tree blob cannot be loaded, restic now warns about this problem with the backup repository. https://github.com/restic/restic/pull/2978 Changelog for restic 0.10.0 (2020-09-19) ======================================= The following sections list the changes in restic 0.10.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1863: Report correct number of directories processed by backup * Fix #2254: Fix tar issues when dumping `/` * Fix #2281: Handle format verbs like '%' properly in `find` output * Fix #2298: Do not hang when run as a background job * Fix #2389: Fix mangled json output of backup command * Fix #2390: Refresh lock timestamp * Fix #2429: Backup --json reports total_bytes_processed as 0 * Fix #2469: Fix incorrect bytes stats in `diff` command * Fix #2518: Do not crash with Synology NAS sftp server * Fix #2531: Fix incorrect size calculation in `stats --mode restore-size` * Fix #2537: Fix incorrect file counts in `stats --mode restore-size` * Fix #2592: SFTP backend supports IPv6 addresses * Fix #2607: Honor RESTIC_CACHE_DIR environment variable on Mac and Windows * Fix #2668: Don't abort the stats command when data blobs are missing * Fix #2674: Add stricter prune error checks * Fix #2899: Fix possible crash in the progress bar of check --read-data * Chg #1597: Honor the --no-lock flag in the mount command * Chg #2482: Remove vendored dependencies * Chg #2546: Return exit code 3 when failing to backup all source data * Chg #2600: Update dependencies, require Go >= 1.13 * Enh #323: Add command for copying snapshots between repositories * Enh #551: Use optimized library for hash calculation of file chunks * Enh #1570: Support specifying multiple host flags for various commands * Enh #1680: Optimize `restic mount` * Enh #2072: Display snapshot date when using `restic find` * Enh #2175: Allow specifying user and host when creating keys * Enh #2195: Simplify and improve restore performance * Enh #2277: Add support for ppc64le * Enh #2328: Improve speed of check command * Enh #2395: Ignore sync errors when operation not supported by local filesystem * Enh #2423: Support user@domain parsing as user * Enh #2427: Add flag `--iexclude-file` to backup command * Enh #2569: Support excluding files by their size * Enh #2571: Self-heal missing file parts during backup of unchanged files * Enh #2576: Improve the chunking algorithm * Enh #2598: Improve speed of diff command * Enh #2599: Slightly reduce memory usage of prune and stats commands * Enh #2733: S3 backend: Add support for WebIdentityTokenFile * Enh #2773: Optimize handling of new index entries * Enh #2781: Reduce memory consumption of in-memory index * Enh #2786: Optimize `list blobs` command * Enh #2790: Optimized file access in restic mount * Enh #2840: Speed-up file deletion in forget, prune and rebuild-index * Enh #2858: Support filtering snapshots by tag and path in the stats command Details ------- * Bugfix #1863: Report correct number of directories processed by backup The directory statistics calculation was fixed to report the actual number of processed directories instead of always zero. https://github.com/restic/restic/issues/1863 * Bugfix #2254: Fix tar issues when dumping `/` We've fixed an issue with dumping either `/` or files on the first sublevel e.g. `/foo` to tar. This also fixes tar dumping issues on Windows where this issue could also happen. https://github.com/restic/restic/issues/2254 https://github.com/restic/restic/issues/2357 https://github.com/restic/restic/pull/2255 * Bugfix #2281: Handle format verbs like '%' properly in `find` output The JSON or "normal" output of the `find` command can now deal with file names that contain substrings which the Golang `fmt` package considers "format verbs" like `%s`. https://github.com/restic/restic/issues/2281 * Bugfix #2298: Do not hang when run as a background job Restic did hang on exit while restoring the terminal configuration when it was started as a background job, for example using `restic ... &`. This has been fixed by only restoring the terminal configuration when restic is interrupted while reading a password from the terminal. https://github.com/restic/restic/issues/2298 * Bugfix #2389: Fix mangled json output of backup command We've fixed a race condition in the json output of the backup command that could cause multiple lines to get mixed up. We've also ensured that the backup summary is printed last. https://github.com/restic/restic/issues/2389 https://github.com/restic/restic/pull/2545 * Bugfix #2390: Refresh lock timestamp Long-running operations did not refresh lock timestamp, resulting in locks becoming stale. This is now fixed. https://github.com/restic/restic/issues/2390 * Bugfix #2429: Backup --json reports total_bytes_processed as 0 We've fixed the json output of total_bytes_processed. The non-json output was already fixed with pull request #2138 but left the json output untouched. https://github.com/restic/restic/issues/2429 * Bugfix #2469: Fix incorrect bytes stats in `diff` command In some cases, the wrong number of bytes (e.g. 16777215.998 TiB) were reported by the `diff` command. This is now fixed. https://github.com/restic/restic/issues/2469 * Bugfix #2518: Do not crash with Synology NAS sftp server It was found that when restic is used to store data on an sftp server on a Synology NAS with a relative path (one which does not start with a slash), it may go into an endless loop trying to create directories on the server. We've fixed this bug by using a function in the sftp library instead of our own implementation. The bug was discovered because the Synology sftp server behaves erratic with non-absolute path (e.g. `home/restic-repo`). This can be resolved by just using an absolute path instead (`/home/restic-repo`). We've also added a paragraph in the FAQ. https://github.com/restic/restic/issues/2518 https://github.com/restic/restic/issues/2363 https://github.com/restic/restic/pull/2530 * Bugfix #2531: Fix incorrect size calculation in `stats --mode restore-size` The restore-size mode of stats was counting hard-linked files as if they were independent. https://github.com/restic/restic/issues/2531 * Bugfix #2537: Fix incorrect file counts in `stats --mode restore-size` The restore-size mode of stats was failing to count empty directories and some files with hard links. https://github.com/restic/restic/issues/2537 * Bugfix #2592: SFTP backend supports IPv6 addresses The SFTP backend now supports IPv6 addresses natively, without relying on aliases in the external SSH configuration. https://github.com/restic/restic/pull/2592 * Bugfix #2607: Honor RESTIC_CACHE_DIR environment variable on Mac and Windows On Mac and Windows, the RESTIC_CACHE_DIR environment variable was ignored. This variable can now be used on all platforms to set the directory where restic stores caches. https://github.com/restic/restic/pull/2607 * Bugfix #2668: Don't abort the stats command when data blobs are missing Runing the stats command in the blobs-per-file mode on a repository with missing data blobs previously resulted in a crash. https://github.com/restic/restic/pull/2668 * Bugfix #2674: Add stricter prune error checks Additional checks were added to the prune command in order to improve resiliency to backend, hardware and/or networking issues. The checks now detect a few more cases where such outside factors could potentially cause data loss. https://github.com/restic/restic/pull/2674 * Bugfix #2899: Fix possible crash in the progress bar of check --read-data We've fixed a possible crash while displaying the progress bar for the check --read-data command. The crash occurred when the length of the progress bar status exceeded the terminal width, which only happened for very narrow terminal windows. https://github.com/restic/restic/pull/2899 https://forum.restic.net/t/restic-rclone-pcloud-connection-issues/2963/15 * Change #1597: Honor the --no-lock flag in the mount command The mount command now does not lock the repository if given the --no-lock flag. This allows to mount repositories which are archived on a read only backend/filesystem. https://github.com/restic/restic/issues/1597 https://github.com/restic/restic/pull/2821 * Change #2482: Remove vendored dependencies We've removed the vendored dependencies (in the subdir `vendor/`). When building restic, the Go compiler automatically fetches the dependencies. It will also cryptographically verify that the correct code has been fetched by using the hashes in `go.sum` (see the link to the documentation below). https://github.com/restic/restic/issues/2482 https://golang.org/cmd/go/#hdr-Module_downloading_and_verification * Change #2546: Return exit code 3 when failing to backup all source data The backup command used to return a zero exit code as long as a snapshot could be created successfully, even if some of the source files could not be read (in which case the snapshot would contain the rest of the files). This made it hard for automation/scripts to detect failures/incomplete backups by looking at the exit code. Restic now returns the following exit codes for the backup command: - 0 when the command was successful - 1 when there was a fatal error (no snapshot created) - 3 when some source data could not be read (incomplete snapshot created) https://github.com/restic/restic/issues/956 https://github.com/restic/restic/issues/2064 https://github.com/restic/restic/issues/2526 https://github.com/restic/restic/issues/2364 https://github.com/restic/restic/pull/2546 * Change #2600: Update dependencies, require Go >= 1.13 Restic now requires Go to be at least 1.13. This allows simplifications in the build process and removing workarounds. This is also probably the last version of restic still supporting mounting repositories via fuse on macOS. The library we're using for fuse does not support macOS any more and osxfuse is not open source any more. https://github.com/bazil/fuse/issues/224 https://github.com/osxfuse/osxfuse/issues/590 https://github.com/restic/restic/pull/2600 https://github.com/restic/restic/pull/2852 https://github.com/restic/restic/pull/2927 * Enhancement #323: Add command for copying snapshots between repositories We've added a copy command, allowing you to copy snapshots from one repository to another. Note that this process will have to read (download) and write (upload) the entire snapshot(s) due to the different encryption keys used on the source and destination repository. Also, the transferred files are not re-chunked, which may break deduplication between files already stored in the destination repo and files copied there using this command. To fully support deduplication between repositories when the copy command is used, the init command now supports the `--copy-chunker-params` option, which initializes the new repository with identical parameters for splitting files into chunks as an already existing repository. This allows copied snapshots to be equally deduplicated in both repositories. https://github.com/restic/restic/issues/323 https://github.com/restic/restic/pull/2606 https://github.com/restic/restic/pull/2928 * Enhancement #551: Use optimized library for hash calculation of file chunks We've switched the library used to calculate the hashes of file chunks, which are used for deduplication, to the optimized Minio SHA-256 implementation. Depending on the CPU it improves the hashing throughput by 10-30%. Modern x86 CPUs with the SHA Extension should be about two to three times faster. https://github.com/restic/restic/issues/551 https://github.com/restic/restic/pull/2709 * Enhancement #1570: Support specifying multiple host flags for various commands Previously commands didn't take more than one `--host` or `-H` argument into account, which could be limiting with e.g. the `forget` command. The `dump`, `find`, `forget`, `ls`, `mount`, `restore`, `snapshots`, `stats` and `tag` commands will now take into account multiple `--host` and `-H` flags. https://github.com/restic/restic/issues/1570 * Enhancement #1680: Optimize `restic mount` We've optimized the FUSE implementation used within restic. `restic mount` is now more responsive and uses less memory. https://github.com/restic/restic/issues/1680 https://github.com/restic/restic/pull/2587 https://github.com/restic/restic/pull/2787 * Enhancement #2072: Display snapshot date when using `restic find` Added the respective snapshot date to the output of `restic find`. https://github.com/restic/restic/issues/2072 * Enhancement #2175: Allow specifying user and host when creating keys When adding a new key to the repository, the username and hostname for the new key can be specified on the command line. This allows overriding the defaults, for example if you would prefer to use the FQDN to identify the host or if you want to add keys for several different hosts without having to run the key add command on those hosts. https://github.com/restic/restic/issues/2175 * Enhancement #2195: Simplify and improve restore performance Significantly improves restore performance of large files (i.e. 50M+): https://github.com/restic/restic/issues/2074 https://forum.restic.net/t/restore-using-rclone-gdrive-backend-is-slow/1112/8 https://forum.restic.net/t/degraded-restore-performance-s3-backend/1400 Fixes "not enough cache capacity" error during restore: https://github.com/restic/restic/issues/2244 NOTE: This new implementation does not guarantee order in which blobs are written to the target files and, for example, the last blob of a file can be written to the file before any of the preceeding file blobs. It is therefore possible to have gaps in the data written to the target files if restore fails or interrupted by the user. The implementation will try to preallocate space for the restored files on the filesystem to prevent file fragmentation. This ensures good read performance for large files, like for example VM images. If preallocating space is not supported by the filesystem, then this step is silently skipped. https://github.com/restic/restic/pull/2195 https://github.com/restic/restic/pull/2893 * Enhancement #2277: Add support for ppc64le Adds support for ppc64le, the processor architecture from IBM. https://github.com/restic/restic/issues/2277 * Enhancement #2328: Improve speed of check command We've improved the check command to traverse trees only once independent of whether they are contained in multiple snapshots. The check command is now much faster for repositories with a large number of snapshots. https://github.com/restic/restic/issues/2284 https://github.com/restic/restic/pull/2328 * Enhancement #2395: Ignore sync errors when operation not supported by local filesystem The local backend has been modified to work with filesystems which doesn't support the `sync` operation. This operation is normally used by restic to ensure that data files are fully written to disk before continuing. For these limited filesystems, saving a file in the backend would previously fail with an "operation not supported" error. This error is now ignored, which means that e.g. an SMB mount on macOS can now be used as storage location for a repository. https://github.com/restic/restic/issues/2395 https://forum.restic.net/t/sync-errors-on-mac-over-smb/1859 * Enhancement #2423: Support user@domain parsing as user Added the ability for user@domain-like users to be authenticated over SFTP servers. https://github.com/restic/restic/pull/2423 * Enhancement #2427: Add flag `--iexclude-file` to backup command The backup command now supports the flag `--iexclude-file` which is a case-insensitive version of `--exclude-file`. https://github.com/restic/restic/issues/2427 https://github.com/restic/restic/pull/2898 * Enhancement #2569: Support excluding files by their size The `backup` command now supports the `--exclude-larger-than` option to exclude files which are larger than the specified maximum size. This can for example be useful to exclude unimportant files with a large file size. https://github.com/restic/restic/issues/2569 https://github.com/restic/restic/pull/2914 * Enhancement #2571: Self-heal missing file parts during backup of unchanged files We've improved the resilience of restic to certain types of repository corruption. For files that are unchanged since the parent snapshot, the backup command now verifies that all parts of the files still exist in the repository. Parts that are missing, e.g. from a damaged repository, are backed up again. This verification was already run for files that were modified since the parent snapshot, but is now also done for unchanged files. Note that restic will not backup file parts that are referenced in the index but where the actual data is not present on disk, as this situation can only be detected by restic check. Please ensure that you run `restic check` regularly. https://github.com/restic/restic/issues/2571 https://github.com/restic/restic/pull/2827 * Enhancement #2576: Improve the chunking algorithm We've updated the chunker library responsible for splitting files into smaller blocks. It should improve the chunking throughput by 5-15% depending on the CPU. https://github.com/restic/restic/issues/2820 https://github.com/restic/restic/pull/2576 https://github.com/restic/restic/pull/2845 * Enhancement #2598: Improve speed of diff command We've improved the performance of the diff command when comparing snapshots with similar content. It should run up to twice as fast as before. https://github.com/restic/restic/pull/2598 * Enhancement #2599: Slightly reduce memory usage of prune and stats commands The prune and the stats command kept directory identifiers in memory twice while searching for used blobs. https://github.com/restic/restic/pull/2599 * Enhancement #2733: S3 backend: Add support for WebIdentityTokenFile We've added support for EKS IAM roles for service accounts feature to the S3 backend. https://github.com/restic/restic/issues/2703 https://github.com/restic/restic/pull/2733 * Enhancement #2773: Optimize handling of new index entries Restic now uses less memory for backups which add a lot of data, e.g. large initial backups. In addition, we've improved the stability in some edge cases. https://github.com/restic/restic/pull/2773 * Enhancement #2781: Reduce memory consumption of in-memory index We've improved how the index is stored in memory. This change can reduce memory usage for large repositories by up to 50% (depending on the operation). https://github.com/restic/restic/pull/2781 https://github.com/restic/restic/pull/2812 * Enhancement #2786: Optimize `list blobs` command We've changed the implementation of `list blobs` which should be now a bit faster and consume almost no memory even for large repositories. https://github.com/restic/restic/pull/2786 * Enhancement #2790: Optimized file access in restic mount Reading large (> 100GiB) files from restic mountpoints is now faster, and the speedup is greater for larger files. https://github.com/restic/restic/pull/2790 * Enhancement #2840: Speed-up file deletion in forget, prune and rebuild-index We've sped up the file deletion for the commands forget, prune and rebuild-index, especially for remote repositories. Deletion was sequential before and is now run in parallel. https://github.com/restic/restic/pull/2840 * Enhancement #2858: Support filtering snapshots by tag and path in the stats command We've added filtering snapshots by `--tag tagList` and by `--path path` to the `stats` command. This includes filtering of only 'latest' snapshots or all snapshots in a repository. https://github.com/restic/restic/issues/2858 https://github.com/restic/restic/pull/2859 https://forum.restic.net/t/stats-for-a-host-and-filtered-snapshots/3020 Changelog for restic 0.9.6 (2019-11-22) ======================================= The following sections list the changes in restic 0.9.6 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #2063: Allow absolute path for filename when backing up from stdin * Fix #2174: Save files with invalid timestamps * Fix #2249: Read fresh metadata for unmodified files * Fix #2301: Add upper bound for t in --read-data-subset=n/t * Fix #2321: Check errors when loading index files * Enh #2179: Use ctime when checking for file changes * Enh #2306: Allow multiple retries for interactive password input * Enh #2330: Make `--group-by` accept both singular and plural * Enh #2350: Add option to configure S3 region Details ------- * Bugfix #2063: Allow absolute path for filename when backing up from stdin When backing up from stdin, handle directory path for `--stdin-filename`. This can be used to specify the full path for the backed-up file. https://github.com/restic/restic/issues/2063 * Bugfix #2174: Save files with invalid timestamps When restic reads invalid timestamps (year is before 0000 or after 9999) it refused to read and archive the file. We've changed the behavior and will now save modified timestamps with the year set to either 0000 or 9999, the rest of the timestamp stays the same, so the file will be saved (albeit with a bogus timestamp). https://github.com/restic/restic/issues/2174 https://github.com/restic/restic/issues/1173 * Bugfix #2249: Read fresh metadata for unmodified files Restic took all metadata for files which were detected as unmodified, not taking into account changed metadata (ownership, mode). This is now corrected. https://github.com/restic/restic/issues/2249 https://github.com/restic/restic/pull/2252 * Bugfix #2301: Add upper bound for t in --read-data-subset=n/t 256 is the effective maximum for t, but restic would allow larger values, leading to strange behavior. https://github.com/restic/restic/issues/2301 https://github.com/restic/restic/pull/2304 * Bugfix #2321: Check errors when loading index files Restic now checks and handles errors which occur when loading index files, the missing check leads to odd errors (and a stack trace printed to users) later. This was reported in the forum. https://github.com/restic/restic/pull/2321 https://forum.restic.net/t/check-rebuild-index-prune/1848/13 * Enhancement #2179: Use ctime when checking for file changes Previously, restic only checked a file's mtime (along with other non-timestamp metadata) to decide if a file has changed. This could cause restic to not notice that a file has changed (and therefore continue to store the old version, as opposed to the modified version) if something edits the file and then resets the timestamp. Restic now also checks the ctime of files, so any modifications to a file should be noticed, and the modified file will be backed up. The ctime check will be disabled if the --ignore-inode flag was given. If this change causes problems for you, please open an issue, and we can look in to adding a seperate flag to disable just the ctime check. https://github.com/restic/restic/issues/2179 https://github.com/restic/restic/pull/2212 * Enhancement #2306: Allow multiple retries for interactive password input Restic used to quit if the repository password was typed incorrectly once. Restic will now ask the user again for the repository password if typed incorrectly. The user will now get three tries to input the correct password before restic quits. https://github.com/restic/restic/issues/2306 * Enhancement #2330: Make `--group-by` accept both singular and plural One can now use the values `host`/`hosts`, `path`/`paths` and `tag` / `tags` interchangeably in the `--group-by` argument. https://github.com/restic/restic/issues/2330 * Enhancement #2350: Add option to configure S3 region We've added a new option for setting the region when accessing an S3-compatible service. For some providers, it is required to set this to a valid value. You can do that either by setting the environment variable `AWS_DEFAULT_REGION` or using the option `s3.region`, e.g. like this: `-o s3.region="us-east-1"`. https://github.com/restic/restic/pull/2350 Changelog for restic 0.9.5 (2019-04-23) ======================================= The following sections list the changes in restic 0.9.5 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #2135: Return error when no bytes could be read from stdin * Fix #2181: Don't cancel timeout after 30 seconds for self-update * Fix #2203: Fix reading passwords from stdin * Fix #2224: Don't abort the find command when a tree can't be loaded * Enh #1895: Add case insensitive include & exclude options * Enh #1937: Support streaming JSON output for backup * Enh #2037: Add group-by option to snapshots command * Enh #2124: Ability to dump folders to tar via stdout * Enh #2139: Return error if no bytes could be read for `backup --stdin` * Enh #2155: Add Openstack application credential auth for Swift * Enh #2184: Add --json support to forget command * Enh #2205: Add --ignore-inode option to backup cmd * Enh #2220: Add config option to set S3 storage class Details ------- * Bugfix #2135: Return error when no bytes could be read from stdin We assume that users reading backup data from stdin want to know when no data could be read, so now restic returns an error when `backup --stdin` is called but no bytes could be read. Usually, this means that an earlier command in a pipe has failed. The documentation was amended and now recommends setting the `pipefail` option (`set -o pipefail`). https://github.com/restic/restic/pull/2135 https://github.com/restic/restic/pull/2139 * Bugfix #2181: Don't cancel timeout after 30 seconds for self-update https://github.com/restic/restic/issues/2181 * Bugfix #2203: Fix reading passwords from stdin Passwords for the `init`, `key add`, and `key passwd` commands can now be read from non-terminal stdin. https://github.com/restic/restic/issues/2203 * Bugfix #2224: Don't abort the find command when a tree can't be loaded Change the find command so that missing trees don't result in a crash. Instead, the error is logged to the debug log, and the tree ID is displayed along with the snapshot it belongs to. This makes it possible to recover repositories that are missing trees by forgetting the snapshots they are used in. https://github.com/restic/restic/issues/2224 * Enhancement #1895: Add case insensitive include & exclude options The backup and restore commands now have --iexclude and --iinclude flags as case insensitive variants of --exclude and --include. https://github.com/restic/restic/issues/1895 https://github.com/restic/restic/pull/2032 * Enhancement #1937: Support streaming JSON output for backup We've added support for getting machine-readable status output during backup, just pass the flag `--json` for `restic backup` and restic will output a stream of JSON objects which contain the current progress. https://github.com/restic/restic/issues/1937 https://github.com/restic/restic/pull/1944 * Enhancement #2037: Add group-by option to snapshots command We have added an option to group the output of the snapshots command, similar to the output of the forget command. The option has been called "--group-by" and accepts any combination of the values "host", "paths" and "tags", separated by commas. Default behavior (not specifying --group-by) has not been changed. We have added support of the grouping to the JSON output. https://github.com/restic/restic/issues/2037 https://github.com/restic/restic/pull/2087 * Enhancement #2124: Ability to dump folders to tar via stdout We've added the ability to dump whole folders to stdout via the `dump` command. Restic now requires at least Go 1.10 due to a limitation of the standard library for Go <= 1.9. https://github.com/restic/restic/issues/2123 https://github.com/restic/restic/pull/2124 * Enhancement #2139: Return error if no bytes could be read for `backup --stdin` When restic is used to backup the output of a program, like `mysqldump | restic backup --stdin`, it now returns an error if no bytes could be read at all. This catches the failure case when `mysqldump` failed for some reason and did not output any data to stdout. https://github.com/restic/restic/pull/2139 * Enhancement #2155: Add Openstack application credential auth for Swift Since Openstack Queens Identity (auth V3) service supports an application credential auth method. It allows to create a technical account with the limited roles. This commit adds an application credential authentication method for the Swift backend. https://github.com/restic/restic/issues/2155 * Enhancement #2184: Add --json support to forget command The forget command now supports the --json argument, outputting the information about what is (or would-be) kept and removed from the repository. https://github.com/restic/restic/issues/2184 https://github.com/restic/restic/pull/2185 * Enhancement #2205: Add --ignore-inode option to backup cmd This option handles backup of virtual filesystems that do not keep fixed inodes for files, like Fuse-based, pCloud, etc. Ignoring inode changes allows to consider the file as unchanged if last modification date and size are unchanged. https://github.com/restic/restic/issues/1631 https://github.com/restic/restic/pull/2205 https://github.com/restic/restic/pull/2047 * Enhancement #2220: Add config option to set S3 storage class The `s3.storage-class` option can be passed to restic (using `-o`) to specify the storage class to be used for S3 objects created by restic. The storage class is passed as-is to S3, so it needs to be understood by the API. On AWS, it can be one of `STANDARD`, `STANDARD_IA`, `ONEZONE_IA`, `INTELLIGENT_TIERING` and `REDUCED_REDUNDANCY`. If unspecified, the default storage class is used (`STANDARD` on AWS). You can mix storage classes in the same bucket, and the setting isn't stored in the restic repository, so be sure to specify it with each command that writes to S3. https://github.com/restic/restic/issues/706 https://github.com/restic/restic/pull/2220 Changelog for restic 0.9.4 (2019-01-06) ======================================= The following sections list the changes in restic 0.9.4 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1989: Google Cloud Storage: Respect bandwidth limit * Fix #2040: Add host name filter shorthand flag for `stats` command * Fix #2068: Correctly return error loading data * Fix #2095: Consistently use local time for snapshots times * Enh #1605: Concurrent restore * Enh #2017: Mount: Enforce FUSE Unix permissions with allow-other * Enh #2070: Make all commands display timestamps in local time * Enh #2085: Allow --files-from to be specified multiple times * Enh #2089: Increase granularity of the "keep within" retention policy * Enh #2094: Run command to get password * Enh #2097: Add key hinting Details ------- * Bugfix #1989: Google Cloud Storage: Respect bandwidth limit The GCS backend did not respect the bandwidth limit configured, a previous commit accidentally removed support for it. https://github.com/restic/restic/issues/1989 https://github.com/restic/restic/pull/2100 * Bugfix #2040: Add host name filter shorthand flag for `stats` command The default value for `--host` flag was set to 'H' (the shorthand version of the flag), this caused the lookup for the latest snapshot to fail. Add shorthand flag `-H` for `--host` (with empty default so if these flags are not specified the latest snapshot will not filter by host name). Also add shorthand `-H` for `backup` command. https://github.com/restic/restic/issues/2040 * Bugfix #2068: Correctly return error loading data In one case during `prune` and `check`, an error loading data from the backend is not returned properly. This is now corrected. https://github.com/restic/restic/issues/1999#issuecomment-433737921 https://github.com/restic/restic/pull/2068 * Bugfix #2095: Consistently use local time for snapshots times By default snapshots created with restic backup were set to local time, but when the --time flag was used the provided timestamp was parsed as UTC. With this change all snapshots times are set to local time. https://github.com/restic/restic/pull/2095 * Enhancement #1605: Concurrent restore This change significantly improves restore performance, especially when using high-latency remote repositories like B2. The implementation now uses several concurrent threads to download and process multiple remote files concurrently. To further reduce restore time, each remote file is downloaded using a single repository request. https://github.com/restic/restic/issues/1605 https://github.com/restic/restic/pull/1719 * Enhancement #2017: Mount: Enforce FUSE Unix permissions with allow-other The fuse mount (`restic mount`) now lets the kernel check the permissions of the files within snapshots (this is done through the `DefaultPermissions` FUSE option) when the option `--allow-other` is specified. To restore the old behavior, we've added the `--no-default-permissions` option. This allows all users that have access to the mount point to access all files within the snapshots. https://github.com/restic/restic/pull/2017 * Enhancement #2070: Make all commands display timestamps in local time Restic used to drop the timezone information from displayed timestamps, it now converts timestamps to local time before printing them so the times can be easily compared to. https://github.com/restic/restic/pull/2070 * Enhancement #2085: Allow --files-from to be specified multiple times Before, restic took only the last file specified with `--files-from` into account, this is now corrected. https://github.com/restic/restic/issues/2085 https://github.com/restic/restic/pull/2086 * Enhancement #2089: Increase granularity of the "keep within" retention policy The `keep-within` option of the `forget` command now accepts time ranges with an hourly granularity. For example, running `restic forget --keep-within 3d12h` will keep all the snapshots made within three days and twelve hours from the time of the latest snapshot. https://github.com/restic/restic/issues/2089 https://github.com/restic/restic/pull/2090 * Enhancement #2094: Run command to get password We've added the `--password-command` option which allows specifying a command that restic runs every time the password for the repository is needed, so it can be integrated with a password manager or keyring. The option can also be set via the environment variable `$RESTIC_PASSWORD_COMMAND`. https://github.com/restic/restic/pull/2094 * Enhancement #2097: Add key hinting Added a new option `--key-hint` and corresponding environment variable `RESTIC_KEY_HINT`. The key hint is a key ID to try decrypting first, before other keys in the repository. This change will benefit repositories with many keys; if the correct key hint is supplied then restic only needs to check one key. If the key hint is incorrect (the key does not exist, or the password is incorrect) then restic will check all keys, as usual. https://github.com/restic/restic/issues/2097 Changelog for restic 0.9.3 (2018-10-13) ======================================= The following sections list the changes in restic 0.9.3 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1935: Remove truncated files from cache * Fix #1978: Do not return an error when the scanner is slower than backup * Enh #1766: Restore: suppress lchown errors when not running as root * Enh #1777: Improve the `find` command * Enh #1876: Display reason why forget keeps snapshots * Enh #1891: Accept glob in paths loaded via --files-from * Enh #1909: Reject files/dirs by name first * Enh #1920: Vendor dependencies with Go 1.11 Modules * Enh #1940: Add directory filter to ls command * Enh #1949: Add new command `self-update` * Enh #1953: Ls: Add JSON output support for restic ls cmd * Enh #1962: Stream JSON output for ls command * Enh #1967: Use `--host` everywhere * Enh #2028: Display size of cache directories Details ------- * Bugfix #1935: Remove truncated files from cache When a file in the local cache is truncated, and restic tries to access data beyond the end of the (cached) file, it used to return an error "EOF". This is now fixed, such truncated files are removed and the data is fetched directly from the backend. https://github.com/restic/restic/issues/1935 * Bugfix #1978: Do not return an error when the scanner is slower than backup When restic makes a backup, there's a background task called "scanner" which collects information on how many files and directories are to be saved, in order to display progress information to the user. When the backup finishes faster than the scanner, it is aborted because the result is not needed any more. This logic contained a bug, where quitting the scanner process was treated as an error, and caused restic to print an unhelpful error message ("context canceled"). https://github.com/restic/restic/issues/1978 https://github.com/restic/restic/pull/1991 * Enhancement #1766: Restore: suppress lchown errors when not running as root Like "cp" and "rsync" do, restic now only reports errors for changing the ownership of files during restore if it is run as root, on non-Windows operating systems. On Windows, the error is reported as usual. https://github.com/restic/restic/issues/1766 * Enhancement #1777: Improve the `find` command We've updated the `find` command to support multiple patterns. `restic find` is now able to list the snapshots containing a specific tree or blob, or even the snapshots that contain blobs belonging to a given pack. A list of IDs can be given, as long as they all have the same type. The command `find` can also display the pack IDs the blobs belong to, if the `--show-pack-id` flag is provided. https://github.com/restic/restic/issues/1777 https://github.com/restic/restic/pull/1780 * Enhancement #1876: Display reason why forget keeps snapshots We've added a column to the list of snapshots `forget` keeps which details the reasons to keep a particuliar snapshot. This makes debugging policies for forget much easier. Please remember to always try things out with `--dry-run`! https://github.com/restic/restic/pull/1876 * Enhancement #1891: Accept glob in paths loaded via --files-from Before that, behaviour was different if paths were appended to command line or from a file, because wild card characters were expanded by shell if appended to command line, but not expanded if loaded from file. https://github.com/restic/restic/issues/1891 * Enhancement #1909: Reject files/dirs by name first The current scanner/archiver code had an architectural limitation: it always ran the `lstat()` system call on all files and directories before a decision to include/exclude the file/dir was made. This lead to a lot of unnecessary system calls for items that could have been rejected by their name or path only. We've changed the archiver/scanner implementation so that it now first rejects by name/path, and only runs the system call on the remaining items. This reduces the number of `lstat()` system calls a lot (depending on the exclude settings). https://github.com/restic/restic/issues/1909 https://github.com/restic/restic/pull/1912 * Enhancement #1920: Vendor dependencies with Go 1.11 Modules Until now, we've used `dep` for managing dependencies, we've now switch to using Go modules. For users this does not change much, only if you want to compile restic without downloading anything with Go 1.11, then you need to run: `go build -mod=vendor build.go` https://github.com/restic/restic/pull/1920 * Enhancement #1940: Add directory filter to ls command The ls command can now be filtered by directories, so that only files in the given directories will be shown. If the --recursive flag is specified, then ls will traverse subfolders and list their files as well. It used to be possible to specify multiple snapshots, but that has been replaced by only one snapshot and the possibility of specifying multiple directories. Specifying directories constrains the walk, which can significantly speed up the listing. https://github.com/restic/restic/issues/1940 https://github.com/restic/restic/pull/1941 * Enhancement #1949: Add new command `self-update` We have added a new command called `self-update` which downloads the latest released version of restic from GitHub and replaces the current binary with it. It does not rely on any external program (so it'll work everywhere), but still verifies the GPG signature using the embedded GPG public key. By default, the `self-update` command is hidden behind the `selfupdate` built tag, which is only set when restic is built using `build.go` (including official releases). The reason for this is that downstream distributions will then not include the command by default, so users are encouraged to use the platform-specific distribution mechanism. https://github.com/restic/restic/pull/1949 * Enhancement #1953: Ls: Add JSON output support for restic ls cmd We've implemented listing files in the repository with JSON as output, just pass `--json` as an option to `restic ls`. This makes the output of the command machine readable. https://github.com/restic/restic/pull/1953 * Enhancement #1962: Stream JSON output for ls command The `ls` command now supports JSON output with the global `--json` flag, and this change streams out JSON messages one object at a time rather than en entire array buffered in memory before encoding. The advantage is it allows large listings to be handled efficiently. Two message types are printed: snapshots and nodes. A snapshot object will precede node objects which belong to that snapshot. The `struct_type` field can be used to determine which kind of message an object is. https://github.com/restic/restic/pull/1962 * Enhancement #1967: Use `--host` everywhere We now use the flag `--host` for all commands which need a host name, using `--hostname` (e.g. for `restic backup`) still works, but will print a deprecation warning. Also, add the short option `-H` where possible. https://github.com/restic/restic/issues/1967 * Enhancement #2028: Display size of cache directories The `cache` command now by default shows the size of the individual cache directories. It can be disabled with `--no-size`. https://github.com/restic/restic/issues/2028 https://github.com/restic/restic/pull/2033 Changelog for restic 0.9.2 (2018-08-06) ======================================= The following sections list the changes in restic 0.9.2 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1854: Allow saving files/dirs on different fs with `--one-file-system` * Fix #1861: Fix case-insensitive search with restic find * Fix #1870: Fix restore with --include * Fix #1880: Use `--cache-dir` argument for `check` command * Fix #1893: Return error when exclude file cannot be read * Enh #874: Add stats command to get information about a repository * Enh #1477: S3 backend: accept AWS_SESSION_TOKEN * Enh #1772: Add restore --verify to verify restored file content * Enh #1853: Add JSON output support to `restic key list` * Enh #1901: Update the Backblaze B2 library * Enh #1906: Add support for B2 application keys Details ------- * Bugfix #1854: Allow saving files/dirs on different fs with `--one-file-system` Restic now allows saving files/dirs on a different file system in a subdir correctly even when `--one-file-system` is specified. The first thing the restic archiver code does is to build a tree of the target files/directories. If it detects that a parent directory is already included (e.g. `restic backup /foo /foo/bar/baz`), it'll ignore the latter argument. Without `--one-file-system`, that's perfectly valid: If `/foo` is to be archived, it will include `/foo/bar/baz`. But with `--one-file-system`, `/foo/bar/baz` may reside on a different file system, so it won't be included with `/foo`. https://github.com/restic/restic/issues/1854 https://github.com/restic/restic/pull/1855 * Bugfix #1861: Fix case-insensitive search with restic find We've fixed the behavior for `restic find -i PATTERN`, which was broken in v0.9.1. https://github.com/restic/restic/pull/1861 * Bugfix #1870: Fix restore with --include We fixed a bug which prevented restic to restore files with an include filter. https://github.com/restic/restic/issues/1870 https://github.com/restic/restic/pull/1900 * Bugfix #1880: Use `--cache-dir` argument for `check` command `check` command now uses a temporary sub-directory of the specified directory if set using the `--cache-dir` argument. If not set, the cache directory is created in the default temporary directory as before. In either case a temporary cache is used to ensure the actual repository is checked (rather than a local copy). The `--cache-dir` argument was not used by the `check` command, instead a cache directory was created in the temporary directory. https://github.com/restic/restic/issues/1880 * Bugfix #1893: Return error when exclude file cannot be read A bug was found: when multiple exclude files were passed to restic and one of them could not be read, an error was printed and restic continued, ignoring even the existing exclude files. Now, an error message is printed and restic aborts when an exclude file cannot be read. https://github.com/restic/restic/issues/1893 * Enhancement #874: Add stats command to get information about a repository https://github.com/restic/restic/issues/874 https://github.com/restic/restic/pull/1729 * Enhancement #1477: S3 backend: accept AWS_SESSION_TOKEN Before, it was not possible to use s3 backend with AWS temporary security credentials(with AWS_SESSION_TOKEN). This change gives higher priority to credentials.EnvAWS credentials provider. https://github.com/restic/restic/issues/1477 https://github.com/restic/restic/pull/1479 https://github.com/restic/restic/pull/1647 * Enhancement #1772: Add restore --verify to verify restored file content Restore will print error message if restored file content does not match expected SHA256 checksum https://github.com/restic/restic/pull/1772 * Enhancement #1853: Add JSON output support to `restic key list` This PR enables users to get the output of `restic key list` in JSON in addition to the existing table format. https://github.com/restic/restic/pull/1853 * Enhancement #1901: Update the Backblaze B2 library We've updated the library we're using for accessing the Backblaze B2 service to 0.5.0 to include support for upcoming so-called "application keys". With this feature, you can create access credentials for B2 which are restricted to e.g. a single bucket or even a sub-directory of a bucket. https://github.com/restic/restic/pull/1901 https://github.com/kurin/blazer * Enhancement #1906: Add support for B2 application keys Restic can now use so-called "application keys" which can be created in the B2 dashboard and were only introduced recently. In contrast to the "master key", such keys can be restricted to a specific bucket and/or path. https://github.com/restic/restic/issues/1906 https://github.com/restic/restic/pull/1914 Changelog for restic 0.9.1 (2018-06-10) ======================================= The following sections list the changes in restic 0.9.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1801: Add limiting bandwidth to the rclone backend * Fix #1822: Allow uploading large files to MS Azure * Fix #1825: Correct `find` to not skip snapshots * Fix #1833: Fix caching files on error * Fix #1834: Resolve deadlock Details ------- * Bugfix #1801: Add limiting bandwidth to the rclone backend The rclone backend did not respect `--limit-upload` or `--limit-download`. Oftentimes it's not necessary to use this, as the limiting in rclone itself should be used because it gives much better results, but in case a remote instance of rclone is used (e.g. called via ssh), it is still relevant to limit the bandwidth from restic to rclone. https://github.com/restic/restic/issues/1801 * Bugfix #1822: Allow uploading large files to MS Azure Sometimes, restic creates files to be uploaded to the repository which are quite large, e.g. when saving directories with many entries or very large files. The MS Azure API does not allow uploading files larger that 256MiB directly, rather restic needs to upload them in blocks of 100MiB. This is now implemented. https://github.com/restic/restic/issues/1822 * Bugfix #1825: Correct `find` to not skip snapshots Under certain circumstances, the `find` command was found to skip snapshots containing directories with files to look for when the directories haven't been modified at all, and were already printed as part of a different snapshot. This is now corrected. In addition, we've switched to our own matching/pattern implementation, so now things like `restic find "/home/user/foo/**/main.go"` are possible. https://github.com/restic/restic/issues/1825 https://github.com/restic/restic/issues/1823 * Bugfix #1833: Fix caching files on error During `check` it may happen that different threads access the same file in the backend, which is then downloaded into the cache only once. When that fails, only the thread which is responsible for downloading the file signals the correct error. The other threads just assume that the file has been downloaded successfully and then get an error when they try to access the cached file. https://github.com/restic/restic/issues/1833 * Bugfix #1834: Resolve deadlock When the "scanning" process restic runs to find out how much data there is does not finish before the backup itself is done, restic stops doing anything. This is resolved now. https://github.com/restic/restic/issues/1834 https://github.com/restic/restic/pull/1835 Changelog for restic 0.9.0 (2018-05-21) ======================================= The following sections list the changes in restic 0.9.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1608: Respect time stamp for new backup when reading from stdin * Fix #1652: Ignore/remove invalid lock files * Fix #1684: Fix backend tests for rest-server * Fix #1730: Ignore sockets for restore * Fix #1745: Correctly parse the argument to --tls-client-cert * Enh #549: Rework archiver code * Enh #827: Add --new-password-file flag for non-interactive password changes * Enh #1433: Support UTF-16 encoding and process Byte Order Mark * Enh #1477: Accept AWS_SESSION_TOKEN for the s3 backend * Enh #1552: Use Google Application Default credentials * Enh #1561: Allow using rclone to access other services * Enh #1648: Ignore AWS permission denied error when creating a repository * Enh #1649: Add illumos/Solaris support * Enh #1665: Improve cache handling for `restic check` * Enh #1709: Improve messages `restic check` prints * Enh #1721: Add `cache` command to list cache dirs * Enh #1735: Allow keeping a time range of snaphots * Enh #1758: Allow saving OneDrive folders in Windows * Enh #1782: Use default AWS credentials chain for S3 backend Details ------- * Bugfix #1608: Respect time stamp for new backup when reading from stdin When reading backups from stdin (via `restic backup --stdin`), restic now uses the time stamp for the new backup passed in `--time`. https://github.com/restic/restic/issues/1608 https://github.com/restic/restic/pull/1703 * Bugfix #1652: Ignore/remove invalid lock files This corrects a bug introduced recently: When an invalid lock file in the repo is encountered (e.g. if the file is empty), the code used to ignore that, but now returns the error. Now, invalid files are ignored for the normal lock check, and removed when `restic unlock --remove-all` is run. https://github.com/restic/restic/issues/1652 https://github.com/restic/restic/pull/1653 * Bugfix #1684: Fix backend tests for rest-server The REST server for restic now requires an explicit parameter (`--no-auth`) if no authentication should be allowed. This is fixed in the tests. https://github.com/restic/restic/pull/1684 * Bugfix #1730: Ignore sockets for restore We've received a report and correct the behavior in which the restore code aborted restoring a directory when a socket was encountered. Unix domain socket files cannot be restored (they are created on the fly once a process starts listening). The error handling was corrected, and in addition we're now ignoring sockets during restore. https://github.com/restic/restic/issues/1730 https://github.com/restic/restic/pull/1731 * Bugfix #1745: Correctly parse the argument to --tls-client-cert Previously, the --tls-client-cert method attempt to read ARGV[1] (hardcoded) instead of the argument that was passed to it. This has been corrected. https://github.com/restic/restic/issues/1745 https://github.com/restic/restic/pull/1746 * Enhancement #549: Rework archiver code The core archiver code and the complementary code for the `backup` command was rewritten completely. This resolves very annoying issues such as 549. The first backup with this release of restic will likely result in all files being re-read locally, so it will take a lot longer. The next backup after that will be fast again. Basically, with the old code, restic took the last path component of each to-be-saved file or directory as the top-level file/directory within the snapshot. This meant that when called as `restic backup /home/user/foo`, the snapshot would contain the files in the directory `/home/user/foo` as `/foo`. This is not the case any more with the new archiver code. Now, restic works very similar to what `tar` does: When restic is called with an absolute path to save, then it'll preserve the directory structure within the snapshot. For the example above, the snapshot would contain the files in the directory within `/home/user/foo` in the snapshot. For relative directories, it only preserves the relative path components. So `restic backup user/foo` will save the files as `/user/foo` in the snapshot. While we were at it, the status display and notification system was completely rewritten. By default, restic now shows which files are currently read (unless `--quiet` is specified) in a multi-line status display. The `backup` command also gained a new option: `--verbose`. It can be specified once (which prints a bit more detail what restic is doing) or twice (which prints a line for each file/directory restic encountered, together with some statistics). Another issue that was resolved is the new code only reads two files at most. The old code would read way too many files in parallel, thereby slowing down the backup process on spinning discs a lot. https://github.com/restic/restic/issues/549 https://github.com/restic/restic/issues/1286 https://github.com/restic/restic/issues/446 https://github.com/restic/restic/issues/1344 https://github.com/restic/restic/issues/1416 https://github.com/restic/restic/issues/1456 https://github.com/restic/restic/issues/1145 https://github.com/restic/restic/issues/1160 https://github.com/restic/restic/pull/1494 * Enhancement #827: Add --new-password-file flag for non-interactive password changes This makes it possible to change a repository password without being prompted. https://github.com/restic/restic/issues/827 https://github.com/restic/restic/pull/1720 https://forum.restic.net/t/changing-repo-password-without-prompt/591 * Enhancement #1433: Support UTF-16 encoding and process Byte Order Mark On Windows, text editors commonly leave a Byte Order Mark at the beginning of the file to define which encoding is used (oftentimes UTF-16). We've added code to support processing the BOMs in text files, like the exclude files, the password file and the file passed via `--files-from`. This does not apply to any file being saved in a backup, those are not touched and archived as they are. https://github.com/restic/restic/issues/1433 https://github.com/restic/restic/issues/1738 https://github.com/restic/restic/pull/1748 * Enhancement #1477: Accept AWS_SESSION_TOKEN for the s3 backend Before, it was not possible to use s3 backend with AWS temporary security credentials(with AWS_SESSION_TOKEN). This change gives higher priority to credentials.EnvAWS credentials provider. https://github.com/restic/restic/issues/1477 https://github.com/restic/restic/pull/1479 https://github.com/restic/restic/pull/1647 * Enhancement #1552: Use Google Application Default credentials Google provide libraries to generate appropriate credentials with various fallback sources. This change uses the library to generate our GCS client, which allows us to make use of these extra methods. This should be backward compatible with previous restic behaviour while adding the additional capabilities to auth from Google's internal metadata endpoints. For users running restic in GCP this can make authentication far easier than it was before. https://github.com/restic/restic/pull/1552 https://developers.google.com/identity/protocols/application-default-credentials * Enhancement #1561: Allow using rclone to access other services We've added the ability to use rclone to store backup data on all backends that it supports. This was done in collaboration with Nick, the author of rclone. You can now use it to first configure a service, then restic manages the rest (starting and stopping rclone). For details, please see the manual. https://github.com/restic/restic/issues/1561 https://github.com/restic/restic/pull/1657 https://rclone.org * Enhancement #1648: Ignore AWS permission denied error when creating a repository It's not possible to use s3 backend scoped to a subdirectory(with specific permissions). Restic doesn't try to create repository in a subdirectory, when 'bucket exists' of parent directory check fails due to permission issues. https://github.com/restic/restic/pull/1648 * Enhancement #1649: Add illumos/Solaris support https://github.com/restic/restic/pull/1649 * Enhancement #1665: Improve cache handling for `restic check` For safety reasons, restic does not use a local metadata cache for the `restic check` command, so that data is loaded from the repository and restic can check it's in good condition. When the cache is disabled, restic will fetch each tiny blob needed for checking the integrity using a separate backend request. For non-local backends, that will take a long time, and depending on the backend (e.g. B2) may also be much more expensive. This PR adds a few commits which will change the behavior as follows: * When `restic check` is called without any additional parameters, it will build a new cache in a temporary directory, which is removed at the end of the check. This way, we'll get readahead for metadata files (so restic will fetch the whole file when the first blob from the file is requested), but all data is freshly fetched from the storage backend. This is the default behavior and will work for almost all users. * When `restic check` is called with `--with-cache`, the default on-disc cache is used. This behavior hasn't changed since the cache was introduced. * When `--no-cache` is specified, restic falls back to the old behavior, and read all tiny blobs in separate requests. https://github.com/restic/restic/issues/1665 https://github.com/restic/restic/issues/1694 https://github.com/restic/restic/pull/1696 * Enhancement #1709: Improve messages `restic check` prints Some messages `restic check` prints are not really errors, so from now on restic does not treat them as errors any more and exits cleanly. https://github.com/restic/restic/pull/1709 https://forum.restic.net/t/what-is-the-standard-procedure-to-follow-if-a-backup-or-restore-is-interrupted/571/2 * Enhancement #1721: Add `cache` command to list cache dirs The command `cache` was added, it allows listing restic's cache directoriers together with the last usage. It also allows removing old cache dirs without having to access a repo, via `restic cache --cleanup` https://github.com/restic/restic/issues/1721 https://github.com/restic/restic/pull/1749 * Enhancement #1735: Allow keeping a time range of snaphots We've added the `--keep-within` option to the `forget` command. It instructs restic to keep all snapshots within the given duration since the newest snapshot. For example, running `restic forget --keep-within 5m7d` will keep all snapshots which have been made in the five months and seven days since the latest snapshot. https://github.com/restic/restic/pull/1735 * Enhancement #1758: Allow saving OneDrive folders in Windows Restic now contains a bugfix to two libraries, which allows saving OneDrive folders in Windows. In order to use the newer versions of the libraries, the minimal version required to compile restic is now Go 1.9. https://github.com/restic/restic/issues/1758 https://github.com/restic/restic/pull/1765 * Enhancement #1782: Use default AWS credentials chain for S3 backend Adds support for file credentials to the S3 backend (e.g. ~/.aws/credentials), and reorders the credentials chain for the S3 backend to match AWS's standard, which is static credentials, env vars, credentials file, and finally remote. https://github.com/restic/restic/pull/1782 Changelog for restic 0.8.3 (2018-02-26) ======================================= The following sections list the changes in restic 0.8.3 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1633: Fixed unexpected 'pack file cannot be listed' error * Fix #1638: Handle errors listing files in the backend * Fix #1641: Ignore files with invalid names in the repo * Enh #1497: Add --read-data-subset flag to check command * Enh #1560: Retry all repository file download errors * Enh #1623: Don't check for presence of files in the backend before writing * Enh #1634: Upgrade B2 client library, reduce HTTP requests Details ------- * Bugfix #1633: Fixed unexpected 'pack file cannot be listed' error Due to a regression introduced in 0.8.2, the `rebuild-index` and `prune` commands failed to read pack files with size of 587, 588, 589 or 590 bytes. https://github.com/restic/restic/issues/1633 https://github.com/restic/restic/pull/1635 * Bugfix #1638: Handle errors listing files in the backend A user reported in the forum that restic completes a backup although a concurrent `prune` operation was running. A few error messages were printed, but the backup was attempted and completed successfully. No error code was returned. This should not happen: The repository is exclusively locked during `prune`, so when `restic backup` is run in parallel, it should abort and return an error code instead. It was found that the bug was in the code introduced only recently, which retries a List() operation on the backend should that fail. It is now corrected. https://github.com/restic/restic/pull/1638 https://forum.restic.net/t/restic-backup-returns-0-exit-code-when-already-locked/484 * Bugfix #1641: Ignore files with invalid names in the repo The release 0.8.2 introduced a bug: when restic encounters files in the repo which do not have a valid name, it tries to load a file with a name of lots of zeroes instead of ignoring it. This is now resolved, invalid file names are just ignored. https://github.com/restic/restic/issues/1641 https://github.com/restic/restic/pull/1643 https://forum.restic.net/t/help-fixing-repo-no-such-file/485/3 * Enhancement #1497: Add --read-data-subset flag to check command This change introduces ability to check integrity of a subset of repository data packs. This can be used to spread integrity check of larger repositories over a period of time. https://github.com/restic/restic/issues/1497 https://github.com/restic/restic/pull/1556 * Enhancement #1560: Retry all repository file download errors Restic will now retry failed downloads, similar to other operations. https://github.com/restic/restic/pull/1560 * Enhancement #1623: Don't check for presence of files in the backend before writing Before, all backend implementations were required to return an error if the file that is to be written already exists in the backend. For most backends, that means making a request (e.g. via HTTP) and returning an error when the file already exists. This is not accurate, the file could have been created between the HTTP request testing for it, and when writing starts, so we've relaxed this requeriment, which saves one additional HTTP request per newly added file. https://github.com/restic/restic/pull/1623 * Enhancement #1634: Upgrade B2 client library, reduce HTTP requests We've upgraded the B2 client library restic uses to access BackBlaze B2. This reduces the number of HTTP requests needed to upload a new file from two to one, which should improve throughput to B2. https://github.com/restic/restic/pull/1634 Changelog for restic 0.8.2 (2018-02-17) ======================================= The following sections list the changes in restic 0.8.2 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1506: Limit bandwith at the http.RoundTripper for HTTP based backends * Fix #1512: Restore directory permissions as the last step * Fix #1528: Correctly create missing subdirs in data/ * Fix #1589: Complete intermediate index upload * Fix #1590: Strip spaces for lines read via --files-from * Fix #1594: Google Cloud Storage: Use generic HTTP transport * Fix #1595: Backup: Remove bandwidth display * Enh #1507: Only reload snapshots once per minute for fuse mount * Enh #1522: Add support for TLS client certificate authentication * Enh #1538: Reduce memory allocations for querying the index * Enh #1541: Reduce number of remote requests during repository check * Enh #1549: Speed up querying across indices and scanning existing files * Enh #1554: Fuse/mount: Correctly handle EOF, add template option * Enh #1564: Don't terminate ssh on SIGINT * Enh #1567: Reduce number of backend requests for rebuild-index and prune * Enh #1579: Retry Backend.List() in case of errors * Enh #1584: Limit index file size Details ------- * Bugfix #1506: Limit bandwith at the http.RoundTripper for HTTP based backends https://github.com/restic/restic/issues/1506 https://github.com/restic/restic/pull/1511 * Bugfix #1512: Restore directory permissions as the last step This change allows restoring into directories that were not writable during backup. Before, restic created the directory, set the read-only mode and then failed to create files in the directory. This change now restores the directory (with its permissions) as the very last step. https://github.com/restic/restic/issues/1512 https://github.com/restic/restic/pull/1536 * Bugfix #1528: Correctly create missing subdirs in data/ https://github.com/restic/restic/issues/1528 https://github.com/restic/restic/pull/1529 * Bugfix #1589: Complete intermediate index upload After a user posted a comprehensive report of what he observed, we were able to find a bug and correct it: During backup, restic uploads so-called "intermediate" index files. When the backup finishes during a transfer of such an intermediate index, the upload is cancelled, but the backup is finished without an error. This leads to an inconsistent state, where the snapshot references data that is contained in the repo, but is not referenced in any index. The situation can be resolved by building a new index with `rebuild-index`, but looks very confusing at first. Since all the data got uploaded to the repo successfully, there was no risk of data loss, just minor inconvenience for our users. https://github.com/restic/restic/pull/1589 https://forum.restic.net/t/error-loading-tree-check-prune-and-forget-gives-error-b2-backend/406 * Bugfix #1590: Strip spaces for lines read via --files-from Leading and trailing spaces in lines read via `--files-from` are now stripped, so it behaves the same as with lines read via `--exclude-file`. https://github.com/restic/restic/issues/1590 https://github.com/restic/restic/pull/1613 * Bugfix #1594: Google Cloud Storage: Use generic HTTP transport It was discovered that the Google Cloud Storage backend did not use the generic HTTP transport, so things such as bandwidth limiting with `--limit-upload` did not work. This is resolved now. https://github.com/restic/restic/pull/1594 * Bugfix #1595: Backup: Remove bandwidth display This commit removes the bandwidth displayed during backup process. It is misleading and seldomly correct, because it's neither the "read bandwidth" (only for the very first backup) nor the "upload bandwidth". Many users are confused about (and rightly so), c.f. #1581, #1033, #1591 We'll eventually replace this display with something more relevant when the new archiver code is ready. https://github.com/restic/restic/pull/1595 * Enhancement #1507: Only reload snapshots once per minute for fuse mount https://github.com/restic/restic/pull/1507 * Enhancement #1522: Add support for TLS client certificate authentication Support has been added for using a TLS client certificate for authentication to HTTP based backend. A file containing the PEM encoded private key and certificate can be set using the `--tls-client-cert` option. https://github.com/restic/restic/issues/1522 https://github.com/restic/restic/pull/1524 * Enhancement #1538: Reduce memory allocations for querying the index This change reduces the internal memory allocations when the index data structures in memory are queried if a blob (part of a file) already exists in the repo. It should speed up backup a bit, and maybe even reduce RAM usage. https://github.com/restic/restic/pull/1538 * Enhancement #1541: Reduce number of remote requests during repository check This change eliminates redundant remote repository calls and significantly improves repository check time. https://github.com/restic/restic/issues/1541 https://github.com/restic/restic/pull/1548 * Enhancement #1549: Speed up querying across indices and scanning existing files This change increases the whenever a blob (part of a file) is searched for in a restic repository. This will reduce cpu usage some when backing up files already backed up by restic. Cpu usage is further decreased when scanning files. https://github.com/restic/restic/pull/1549 * Enhancement #1554: Fuse/mount: Correctly handle EOF, add template option We've added the `--snapshot-template` string, which can be used to specify a template for a snapshot directory. In addition, accessing data after the end of a file via the fuse mount is now handled correctly. https://github.com/restic/restic/pull/1554 * Enhancement #1564: Don't terminate ssh on SIGINT We've reworked the code which runs the `ssh` login for the sftp backend so that it can prompt for a password (if needed) but does not exit when the user presses CTRL+C (SIGINT) e.g. during backup. This allows restic to properly shut down when it receives SIGINT and remove the lock file from the repo, afterwards exiting the `ssh` process. https://github.com/restic/restic/pull/1564 https://github.com/restic/restic/pull/1588 * Enhancement #1567: Reduce number of backend requests for rebuild-index and prune We've found a way to reduce then number of backend requests for the `rebuild-index` and `prune` operations. This significantly speeds up the operations for high-latency backends. https://github.com/restic/restic/issues/1567 https://github.com/restic/restic/pull/1574 https://github.com/restic/restic/pull/1575 * Enhancement #1579: Retry Backend.List() in case of errors https://github.com/restic/restic/pull/1579 * Enhancement #1584: Limit index file size Before, restic would create a single new index file on `prune` or `rebuild-index`, this may lead to memory problems when this huge index is created and loaded again. We're now limiting the size of the index file, and split newly created index files into several smaller ones. This allows restic to be more memory-efficient. https://github.com/restic/restic/issues/1412 https://github.com/restic/restic/issues/979 https://github.com/restic/restic/issues/526 https://github.com/restic/restic/pull/1584 Changelog for restic 0.8.1 (2017-12-27) ======================================= The following sections list the changes in restic 0.8.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1454: Correct cache dir location for Windows and Darwin * Fix #1457: Improve s3 backend with DigitalOcean Spaces * Fix #1459: Disable handling SIGPIPE * Chg #1452: Do not save atime by default * Enh #11: Add the `diff` command * Enh #1436: Add code to detect old cache directories * Enh #1439: Improve cancellation logic Details ------- * Bugfix #1454: Correct cache dir location for Windows and Darwin The cache directory on Windows and Darwin was not correct, instead the directory `.cache` was used. https://github.com/restic/restic/pull/1454 * Bugfix #1457: Improve s3 backend with DigitalOcean Spaces https://github.com/restic/restic/issues/1457 https://github.com/restic/restic/pull/1459 * Bugfix #1459: Disable handling SIGPIPE We've disabled handling SIGPIPE again. Turns out, writing to broken TCP connections also raised SIGPIPE, so restic exits on the first write to a broken connection. Instead, restic should retry the request. https://github.com/restic/restic/issues/1457 https://github.com/restic/restic/issues/1466 https://github.com/restic/restic/pull/1459 * Change #1452: Do not save atime by default By default, the access time for files and dirs is not saved any more. It is not possible to reliably disable updating the access time during a backup, so for the next backup the access time is different again. This means a lot of metadata is saved. If you want to save the access time anyway, pass `--with-atime` to the `backup` command. https://github.com/restic/restic/pull/1452 * Enhancement #11: Add the `diff` command The command `diff` was added, it allows comparing two snapshots and listing all differences. https://github.com/restic/restic/issues/11 https://github.com/restic/restic/issues/1460 https://github.com/restic/restic/pull/1462 * Enhancement #1436: Add code to detect old cache directories We've added code to detect old cache directories of repositories that haven't been used in a long time, restic now prints a note when it detects that such dirs exist. Also, the option `--cleanup-cache` was added to automatically remove such directories. That's not a problem because the cache will be rebuild once a repo is accessed again. https://github.com/restic/restic/pull/1436 * Enhancement #1439: Improve cancellation logic The cancellation logic was improved, restic can now shut down cleanly when requested to do so (e.g. via ctrl+c). https://github.com/restic/restic/pull/1439 Changelog for restic 0.8.0 (2017-11-26) ======================================= The following sections list the changes in restic 0.8.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Sec #1445: Prevent writing outside the target directory during restore * Fix #1256: Re-enable workaround for S3 backend * Fix #1291: Reuse backend TCP connections to BackBlaze B2 * Fix #1317: Run prune when `forget --prune` is called with just snapshot IDs * Fix #1437: Remove implicit path `/restic` for the s3 backend * Enh #448: Sftp backend prompts for password * Enh #510: Add `dump` command * Enh #1040: Add local metadata cache * Enh #1102: Add subdirectory `ids` to fuse mount * Enh #1114: Add `--cacert` to specify TLS certificates to check against * Enh #1216: Add upload/download limiting * Enh #1249: Add `latest` symlink in fuse mount * Enh #1269: Add `--compact` to `forget` command * Enh #1271: Cache results for excludes for `backup` * Enh #1274: Add `generate` command, replaces `manpage` and `autocomplete` * Enh #1281: Google Cloud Storage backend needs less permissions * Enh #1319: Make `check` print `no errors found` explicitly * Enh #1353: Retry failed backend requests * Enh #1367: Allow comments in files read from via `--file-from` Details ------- * Security #1445: Prevent writing outside the target directory during restore A vulnerability was found in the restic restorer, which allowed attackers in special circumstances to restore files to a location outside of the target directory. Due to the circumstances we estimate this to be a low-risk vulnerability, but urge all users to upgrade to the latest version of restic. Exploiting the vulnerability requires a Linux/Unix system which saves backups via restic and a Windows systems which restores files from the repo. In addition, the attackers need to be able to create files with arbitrary names which are then saved to the restic repo. For example, by creating a file named "..\test.txt" (which is a perfectly legal filename on Linux) and restoring a snapshot containing this file on Windows, it would be written to the parent of the target directory. We'd like to thank Tyler Spivey for reporting this responsibly! https://github.com/restic/restic/pull/1445 * Bugfix #1256: Re-enable workaround for S3 backend We've re-enabled a workaround for `minio-go` (the library we're using to access s3 backends), this reduces memory usage. https://github.com/restic/restic/issues/1256 https://github.com/restic/restic/pull/1267 * Bugfix #1291: Reuse backend TCP connections to BackBlaze B2 A bug was discovered in the library we're using to access Backblaze, it now reuses already established TCP connections which should be a lot faster and not cause network failures any more. https://github.com/restic/restic/issues/1291 https://github.com/restic/restic/pull/1301 * Bugfix #1317: Run prune when `forget --prune` is called with just snapshot IDs A bug in the `forget` command caused `prune` not to be run when `--prune` was specified without a policy, e.g. when only snapshot IDs that should be forgotten are listed manually. https://github.com/restic/restic/pull/1317 * Bugfix #1437: Remove implicit path `/restic` for the s3 backend The s3 backend used the subdir `restic` within a bucket if no explicit path after the bucket name was specified. Since this version, restic does not use this default path any more. If you created a repo on s3 in a bucket without specifying a path within the bucket, you need to add `/restic` at the end of the repository specification to access your repo: `s3:s3.amazonaws.com/bucket/restic` https://github.com/restic/restic/issues/1292 https://github.com/restic/restic/pull/1437 * Enhancement #448: Sftp backend prompts for password The sftp backend now prompts for the password if a password is necessary for login. https://github.com/restic/restic/issues/448 https://github.com/restic/restic/pull/1270 * Enhancement #510: Add `dump` command We've added the `dump` command which prints a file from a snapshot to stdout. This can e.g. be used to restore files read with `backup --stdin`. https://github.com/restic/restic/issues/510 https://github.com/restic/restic/pull/1346 * Enhancement #1040: Add local metadata cache We've added a local cache for metadata so that restic doesn't need to load all metadata (snapshots, indexes, ...) from the repo each time it starts. By default the cache is active, but there's a new global option `--no-cache` that can be used to disable the cache. By deafult, the cache a standard cache folder for the OS, which can be overridden with `--cache-dir`. The cache will automatically populate, indexes and snapshots are saved as they are loaded. Cache directories for repos that haven't been used recently can automatically be removed by restic with the `--cleanup-cache` option. A related change was to by default create pack files in the repo that contain either data or metadata, not both mixed together. This allows easy caching of only the metadata files. The next run of `restic prune` will untangle mixed files automatically. https://github.com/restic/restic/issues/29 https://github.com/restic/restic/issues/738 https://github.com/restic/restic/issues/282 https://github.com/restic/restic/pull/1040 https://github.com/restic/restic/pull/1287 https://github.com/restic/restic/pull/1436 https://github.com/restic/restic/pull/1265 * Enhancement #1102: Add subdirectory `ids` to fuse mount The fuse mount now has an `ids` subdirectory which contains the snapshots below their (short) IDs. https://github.com/restic/restic/issues/1102 https://github.com/restic/restic/pull/1299 https://github.com/restic/restic/pull/1320 * Enhancement #1114: Add `--cacert` to specify TLS certificates to check against We've added the `--cacert` option which can be used to pass one (or more) CA certificates to restic. These are used in addition to the system CA certificates to verify HTTPS certificates (e.g. for the REST backend). https://github.com/restic/restic/issues/1114 https://github.com/restic/restic/pull/1276 * Enhancement #1216: Add upload/download limiting We've added support for rate limiting through `--limit-upload` and `--limit-download` flags. https://github.com/restic/restic/issues/1216 https://github.com/restic/restic/pull/1336 https://github.com/restic/restic/pull/1358 * Enhancement #1249: Add `latest` symlink in fuse mount The directory structure in the fuse mount now exposes a symlink `latest` which points to the latest snapshot in that particular directory. https://github.com/restic/restic/pull/1249 * Enhancement #1269: Add `--compact` to `forget` command The option `--compact` was added to the `forget` command to provide the same compact view as the `snapshots` command. https://github.com/restic/restic/pull/1269 * Enhancement #1271: Cache results for excludes for `backup` The `backup` command now caches the result of excludes for a directory. https://github.com/restic/restic/issues/1271 https://github.com/restic/restic/pull/1326 * Enhancement #1274: Add `generate` command, replaces `manpage` and `autocomplete` The `generate` command has been added, which replaces the now removed commands `manpage` and `autocomplete`. This release of restic contains the most recent manpages in `doc/man` and the auto-completion files for bash and zsh in `doc/bash-completion.sh` and `doc/zsh-completion.zsh` https://github.com/restic/restic/issues/1274 https://github.com/restic/restic/pull/1282 * Enhancement #1281: Google Cloud Storage backend needs less permissions The Google Cloud Storage backend no longer requires the service account to have the `storage.buckets.get` permission ("Storage Admin" role) in `restic init` if the bucket already exists. https://github.com/restic/restic/pull/1281 * Enhancement #1319: Make `check` print `no errors found` explicitly The `check` command now explicetly prints `No errors were found` when no errors could be found. https://github.com/restic/restic/issues/1303 https://github.com/restic/restic/pull/1319 * Enhancement #1353: Retry failed backend requests https://github.com/restic/restic/pull/1353 * Enhancement #1367: Allow comments in files read from via `--file-from` When the list of files/dirs to be saved is read from a file with `--files-from`, comment lines (starting with `#`) are now ignored. https://github.com/restic/restic/issues/1367 https://github.com/restic/restic/pull/1368 Changelog for restic 0.7.3 (2017-09-20) ======================================= The following sections list the changes in restic 0.7.3 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1246: List all files stored in Google Cloud Storage Details ------- * Bugfix #1246: List all files stored in Google Cloud Storage For large backups stored in Google Cloud Storage, the `prune` command fails because listing only returns the first 1000 files. This has been corrected, no data is lost in the process. In addition, a plausibility check was added to `prune`. https://github.com/restic/restic/issues/1246 https://github.com/restic/restic/pull/1247 Changelog for restic 0.7.2 (2017-09-13) ======================================= The following sections list the changes in restic 0.7.2 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1164: Make the `key remove` command behave as documented * Fix #1167: Do not create a local repo unless `init` is used * Fix #1191: Make sure to write profiling files on interrupt * Enh #317: Add `--exclude-caches` and `--exclude-if-present` * Enh #697: Automatically generate man pages for all restic commands * Enh #1044: Improve `restore`, do not traverse/load excluded directories * Enh #1061: Add Dockerfile and official Docker image * Enh #1126: Use the standard Go git repository layout, use `dep` for vendoring * Enh #1132: Make `key` command always prompt for a password * Enh #1134: Add support for storing backups on Google Cloud Storage * Enh #1144: Properly report errors when reading files with exclude patterns * Enh #1149: Add support for storing backups on Microsoft Azure Blob Storage * Enh #1179: Resolve name conflicts, append a counter * Enh #1196: Add `--group-by` to `forget` command for flexible grouping * Enh #1203: Print stats on all BSD systems when SIGINFO (ctrl+t) is received * Enh #1205: Allow specifying time/date for a backup with `--time` * Enh #1218: Add `--compact` to `snapshots` command Details ------- * Bugfix #1164: Make the `key remove` command behave as documented https://github.com/restic/restic/pull/1164 * Bugfix #1167: Do not create a local repo unless `init` is used When a restic command other than `init` is used with a local repository and the repository directory does not exist, restic creates the directory structure. That's an error, only the `init` command should create the dir. https://github.com/restic/restic/issues/1167 https://github.com/restic/restic/pull/1182 * Bugfix #1191: Make sure to write profiling files on interrupt Since a few releases restic had the ability to write profiling files for memory and CPU usage when `debug` is enabled. It was discovered that when restic is interrupted (ctrl+c is pressed), the proper shutdown hook is not run. This is now corrected. https://github.com/restic/restic/pull/1191 * Enhancement #317: Add `--exclude-caches` and `--exclude-if-present` A new option `--exclude-caches` was added that allows excluding cache directories (that are tagged as such). This is a special case of a more generic option `--exclude-if-present` which excludes a directory if a file with a specific name (and contents) is present. https://github.com/restic/restic/issues/317 https://github.com/restic/restic/pull/1170 https://github.com/restic/restic/pull/1224 * Enhancement #697: Automatically generate man pages for all restic commands https://github.com/restic/restic/issues/697 https://github.com/restic/restic/pull/1147 * Enhancement #1044: Improve `restore`, do not traverse/load excluded directories https://github.com/restic/restic/pull/1044 * Enhancement #1061: Add Dockerfile and official Docker image https://github.com/restic/restic/pull/1061 * Enhancement #1126: Use the standard Go git repository layout, use `dep` for vendoring The git repository layout was changed to resemble the layout typically used in Go projects, we're not using `gb` for building restic any more and vendoring the dependencies is now taken care of by `dep`. https://github.com/restic/restic/pull/1126 * Enhancement #1132: Make `key` command always prompt for a password The `key` command now prompts for a password even if the original password to access a repo has been specified via the `RESTIC_PASSWORD` environment variable or a password file. https://github.com/restic/restic/issues/1132 https://github.com/restic/restic/pull/1133 * Enhancement #1134: Add support for storing backups on Google Cloud Storage https://github.com/restic/restic/issues/211 https://github.com/restic/restic/pull/1134 https://github.com/restic/restic/pull/1052 * Enhancement #1144: Properly report errors when reading files with exclude patterns https://github.com/restic/restic/pull/1144 * Enhancement #1149: Add support for storing backups on Microsoft Azure Blob Storage The library we're using to access the service requires Go 1.8, so restic now needs at least Go 1.8. https://github.com/restic/restic/issues/609 https://github.com/restic/restic/pull/1149 https://github.com/restic/restic/pull/1059 * Enhancement #1179: Resolve name conflicts, append a counter https://github.com/restic/restic/issues/1179 https://github.com/restic/restic/pull/1209 * Enhancement #1196: Add `--group-by` to `forget` command for flexible grouping https://github.com/restic/restic/pull/1196 * Enhancement #1203: Print stats on all BSD systems when SIGINFO (ctrl+t) is received https://github.com/restic/restic/pull/1203 https://github.com/restic/restic/pull/1082#issuecomment-326279920 * Enhancement #1205: Allow specifying time/date for a backup with `--time` https://github.com/restic/restic/pull/1205 * Enhancement #1218: Add `--compact` to `snapshots` command The option `--compact` was added to the `snapshots` command to get a better overview of the snapshots in a repo. It limits each snapshot to a single line. https://github.com/restic/restic/issues/1218 https://github.com/restic/restic/pull/1223 Changelog for restic 0.7.1 (2017-07-22) ======================================= The following sections list the changes in restic 0.7.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #1115: Fix `prune`, only include existing files in indexes * Enh #1055: Create subdirs below `data/` for local/sftp backends * Enh #1067: Allow loading credentials for s3 from IAM * Enh #1073: Add `migrate` cmd to migrate from `s3legacy` to `default` layout * Enh #1080: Ignore chmod() errors on filesystems which do not support it * Enh #1081: Clarify semantic for `--tag` for the `forget` command * Enh #1082: Print stats on SIGINFO on Darwin and FreeBSD (ctrl+t) Details ------- * Bugfix #1115: Fix `prune`, only include existing files in indexes A bug was found (and corrected) in the index rebuilding after prune, which led to indexes which include blobs that were not present in the repo any more. There were already checks in place which detected this situation and aborted with an error message. A new run of either `prune` or `rebuild-index` corrected the index files. This is now fixed and a test has been added to detect this. https://github.com/restic/restic/pull/1115 * Enhancement #1055: Create subdirs below `data/` for local/sftp backends The local and sftp backends now create the subdirs below `data/` on open/init. This way, restic makes sure that they always exist. This is connected to an issue for the sftp server. https://github.com/restic/restic/issues/1055 https://github.com/restic/rest-server/pull/11#issuecomment-309879710 https://github.com/restic/restic/pull/1077 https://github.com/restic/restic/pull/1105 * Enhancement #1067: Allow loading credentials for s3 from IAM When no S3 credentials are specified in the environment variables, restic now tries to load credentials from an IAM instance profile when the s3 backend is used. https://github.com/restic/restic/issues/1067 https://github.com/restic/restic/pull/1086 * Enhancement #1073: Add `migrate` cmd to migrate from `s3legacy` to `default` layout The `migrate` command for changing the `s3legacy` layout to the `default` layout for s3 backends has been improved: It can now be restarted with `restic migrate --force s3_layout` and automatically retries operations on error. https://github.com/restic/restic/issues/1073 https://github.com/restic/restic/pull/1075 * Enhancement #1080: Ignore chmod() errors on filesystems which do not support it https://github.com/restic/restic/pull/1080 https://github.com/restic/restic/pull/1112 * Enhancement #1081: Clarify semantic for `--tag` for the `forget` command https://github.com/restic/restic/issues/1081 https://github.com/restic/restic/pull/1090 * Enhancement #1082: Print stats on SIGINFO on Darwin and FreeBSD (ctrl+t) https://github.com/restic/restic/pull/1082 Changelog for restic 0.7.0 (2017-07-01) ======================================= The following sections list the changes in restic 0.7.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Fix #965: Switch to `default` repo layout for the s3 backend * Fix #1013: Switch back to using the high-level minio-go API for s3 * Enh #512: Add Backblaze B2 backend * Enh #636: Add dirs `tags` and `hosts` to fuse mount * Enh #975: Add new backend for OpenStack Swift * Enh #989: Improve performance of the `find` command * Enh #998: Improve performance of the fuse mount * Enh #1021: Detect invalid backend name and print error * Enh #1029: Remove invalid pack files when `prune` is run Details ------- * Bugfix #965: Switch to `default` repo layout for the s3 backend The default layout for the s3 backend is now `default` (instead of `s3legacy`). Also, there's a new `migrate` command to convert an existing repo, it can be run like this: `restic migrate s3_layout` https://github.com/restic/restic/issues/965 https://github.com/restic/restic/pull/1004 * Bugfix #1013: Switch back to using the high-level minio-go API for s3 For the s3 backend we're back to using the high-level API the s3 client library for uploading data, a few users reported dropped connections (which the library will automatically retry now). https://github.com/restic/restic/issues/1013 https://github.com/restic/restic/issues/1023 https://github.com/restic/restic/pull/1025 * Enhancement #512: Add Backblaze B2 backend https://github.com/restic/restic/issues/512 https://github.com/restic/restic/pull/978 * Enhancement #636: Add dirs `tags` and `hosts` to fuse mount The fuse mount now has two more directories: `tags` contains a subdir for each tag, which in turn contains only the snapshots that have this tag. The subdir `hosts` contains a subdir for each host that has a snapshot, and the subdir contains the snapshots for that host. https://github.com/restic/restic/issues/636 https://github.com/restic/restic/pull/1050 * Enhancement #975: Add new backend for OpenStack Swift https://github.com/restic/restic/pull/975 https://github.com/restic/restic/pull/648 * Enhancement #989: Improve performance of the `find` command Improved performance for the `find` command: Restic recognizes paths it has already checked for the files in question, so the number of backend requests is reduced a lot. https://github.com/restic/restic/issues/989 https://github.com/restic/restic/pull/993 * Enhancement #998: Improve performance of the fuse mount Listing directories which contain large files now is significantly faster. https://github.com/restic/restic/pull/998 * Enhancement #1021: Detect invalid backend name and print error Restic now tries to detect when an invalid/unknown backend is used and returns an error message. https://github.com/restic/restic/issues/1021 https://github.com/restic/restic/pull/1070 * Enhancement #1029: Remove invalid pack files when `prune` is run The `prune` command has been improved and will now remove invalid pack files, for example files that have not been uploaded completely because a backup was interrupted. https://github.com/restic/restic/issues/1029 https://github.com/restic/restic/pull/1036 Changelog for restic 0.6.1 (2017-06-01) ======================================= The following sections list the changes in restic 0.6.1 relevant to restic users. The changes are ordered by importance. Summary ------- * Enh #974: Remove regular status reports * Enh #981: Remove temporary path from binary in `build.go` * Enh #985: Allow multiple parallel idle HTTP connections Details ------- * Enhancement #974: Remove regular status reports Regular status report: We've removed the status report that was printed every 10 seconds when restic is run non-interactively. You can still force reporting the current status by sending a `USR1` signal to the process. https://github.com/restic/restic/pull/974 * Enhancement #981: Remove temporary path from binary in `build.go` The `build.go` now strips the temporary directory used for compilation from the binary. This is the first step in enabling reproducible builds. https://github.com/restic/restic/pull/981 * Enhancement #985: Allow multiple parallel idle HTTP connections Backends based on HTTP now allow several idle connections in parallel. This is especially important for the REST backend, which (when used with a local server) may create a lot connections and exhaust available ports quickly. https://github.com/restic/restic/issues/985 https://github.com/restic/restic/pull/986 Changelog for restic 0.6.0 (2017-05-29) ======================================= The following sections list the changes in restic 0.6.0 relevant to restic users. The changes are ordered by importance. Summary ------- * Enh #957: Make `forget` consistent * Enh #962: Improve memory and runtime for the s3 backend * Enh #966: Unify repository layout for all backends Details ------- * Enhancement #957: Make `forget` consistent The `forget` command was corrected to be more consistent in which snapshots are to be forgotten. It is possible that the new code removes more snapshots than before, so please review what would be deleted by using the `--dry-run` option. https://github.com/restic/restic/issues/953 https://github.com/restic/restic/pull/957 * Enhancement #962: Improve memory and runtime for the s3 backend We've updated the library used for accessing s3, switched to using a lower level API and added caching for some requests. This lead to a decrease in memory usage and a great speedup. In addition, we added benchmark functions for all backends, so we can track improvements over time. The Continuous Integration test service we're using (Travis) now runs the s3 backend tests not only against a Minio server, but also against the Amazon s3 live service, so we should be notified of any regressions much sooner. https://github.com/restic/restic/pull/962 https://github.com/restic/restic/pull/960 https://github.com/restic/restic/pull/946 https://github.com/restic/restic/pull/938 https://github.com/restic/restic/pull/883 * Enhancement #966: Unify repository layout for all backends Up to now the s3 backend used a special repository layout. We've decided to unify the repository layout and implemented the default layout also for the s3 backend. For creating a new repository on s3 with the default layout, use `restic -o s3.layout=default init`. For further commands the option is not necessary any more, restic will automatically detect the correct layout to use. A future version will switch to the default layout for new repositories. https://github.com/restic/restic/issues/965 https://github.com/restic/restic/pull/966