syncthing/cmd/stdiscosrv/database.go

441 lines
10 KiB
Go
Raw Normal View History

cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
// Copyright (C) 2018 The Syncthing Authors.
//
// This Source Code Form is subject to the terms of the Mozilla Public
// License, v. 2.0. If a copy of the MPL was not distributed with this file,
// You can obtain one at https://mozilla.org/MPL/2.0/.
//go:generate go run ../../proto/scripts/protofmt.go database.proto
//go:generate protoc -I ../../ -I . --gogofast_out=. database.proto
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
package main
import (
"bufio"
2024-09-10 09:51:07 +00:00
"cmp"
2020-11-17 12:19:04 +00:00
"context"
"encoding/binary"
2024-09-10 17:41:22 +00:00
"errors"
"io"
"log"
"os"
"path"
2024-09-10 17:41:22 +00:00
"runtime"
2024-09-10 09:51:07 +00:00
"slices"
"strings"
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
"time"
"github.com/puzpuzpuz/xsync/v3"
"github.com/syncthing/syncthing/lib/protocol"
"github.com/syncthing/syncthing/lib/rand"
"github.com/syncthing/syncthing/lib/s3"
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
)
type clock interface {
Now() time.Time
}
type defaultClock struct{}
func (defaultClock) Now() time.Time {
return time.Now()
}
type database interface {
put(key *protocol.DeviceID, rec DatabaseRecord) error
merge(key *protocol.DeviceID, addrs []DatabaseAddress, seen int64) error
get(key *protocol.DeviceID) (DatabaseRecord, error)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
type inMemoryStore struct {
m *xsync.MapOf[protocol.DeviceID, DatabaseRecord]
dir string
flushInterval time.Duration
s3 *s3.Session
objKey string
clock clock
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
func newInMemoryStore(dir string, flushInterval time.Duration, s3sess *s3.Session) *inMemoryStore {
hn, err := os.Hostname()
if err != nil {
hn = rand.String(8)
}
s := &inMemoryStore{
m: xsync.NewMapOf[protocol.DeviceID, DatabaseRecord](),
dir: dir,
flushInterval: flushInterval,
s3: s3sess,
objKey: hn + ".db",
clock: defaultClock{},
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
nr, err := s.read()
if os.IsNotExist(err) && s3sess != nil {
// Try to read from AWS
latestKey, cerr := s3sess.LatestKey()
if cerr != nil {
log.Println("Error reading database from S3:", err)
return s
}
fd, cerr := os.Create(path.Join(s.dir, "records.db"))
if cerr != nil {
log.Println("Error creating database file:", err)
return s
}
if cerr := s3sess.Download(fd, latestKey); cerr != nil {
log.Printf("Error reading database from S3: %v", err)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
_ = fd.Close()
nr, err = s.read()
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
if err != nil {
log.Println("Error reading database:", err)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
log.Printf("Read %d records from database", nr)
s.expireAndCalculateStatistics()
return s
}
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
func (s *inMemoryStore) put(key *protocol.DeviceID, rec DatabaseRecord) error {
t0 := time.Now()
s.m.Store(*key, rec)
databaseOperations.WithLabelValues(dbOpPut, dbResSuccess).Inc()
databaseOperationSeconds.WithLabelValues(dbOpPut).Observe(time.Since(t0).Seconds())
return nil
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
func (s *inMemoryStore) merge(key *protocol.DeviceID, addrs []DatabaseAddress, seen int64) error {
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
t0 := time.Now()
newRec := DatabaseRecord{
Addresses: addrs,
Seen: seen,
}
oldRec, _ := s.m.Load(*key)
newRec = merge(oldRec, newRec)
s.m.Store(*key, newRec)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
databaseOperations.WithLabelValues(dbOpMerge, dbResSuccess).Inc()
databaseOperationSeconds.WithLabelValues(dbOpMerge).Observe(time.Since(t0).Seconds())
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
return nil
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
func (s *inMemoryStore) get(key *protocol.DeviceID) (DatabaseRecord, error) {
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
t0 := time.Now()
defer func() {
databaseOperationSeconds.WithLabelValues(dbOpGet).Observe(time.Since(t0).Seconds())
}()
rec, ok := s.m.Load(*key)
if !ok {
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
databaseOperations.WithLabelValues(dbOpGet, dbResNotFound).Inc()
return DatabaseRecord{}, nil
}
rec.Addresses = expire(rec.Addresses, s.clock.Now())
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
databaseOperations.WithLabelValues(dbOpGet, dbResSuccess).Inc()
return rec, nil
}
func (s *inMemoryStore) Serve(ctx context.Context) error {
if s.flushInterval <= 0 {
<-ctx.Done()
return nil
}
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
t := time.NewTimer(s.flushInterval)
defer t.Stop()
loop:
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
for {
select {
case <-t.C:
log.Println("Calculating statistics")
s.expireAndCalculateStatistics()
log.Println("Flushing database")
if err := s.write(); err != nil {
log.Println("Error writing database:", err)
}
log.Println("Finished flushing database")
t.Reset(s.flushInterval)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
2020-11-17 12:19:04 +00:00
case <-ctx.Done():
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
// We're done.
break loop
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
}
return s.write()
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
func (s *inMemoryStore) expireAndCalculateStatistics() {
now := s.clock.Now()
cutoff24h := now.Add(-24 * time.Hour).UnixNano()
cutoff1w := now.Add(-7 * 24 * time.Hour).UnixNano()
2024-09-15 08:45:03 +00:00
current, currentIPv4, currentIPv6, currentIPv6GUA, last24h, last1w := 0, 0, 0, 0, 0, 0
2024-09-10 17:41:22 +00:00
n := 0
s.m.Range(func(key protocol.DeviceID, rec DatabaseRecord) bool {
2024-09-10 17:41:22 +00:00
if n%1000 == 0 {
runtime.Gosched()
}
n++
addresses := expire(rec.Addresses, now)
if len(addresses) == 0 {
rec.Addresses = nil
s.m.Store(key, rec)
} else if len(addresses) != len(rec.Addresses) {
rec.Addresses = addresses
s.m.Store(key, rec)
}
switch {
case len(rec.Addresses) > 0:
current++
2024-09-15 08:45:03 +00:00
seenIPv4, seenIPv6, seenIPv6GUA := false, false, false
for _, addr := range rec.Addresses {
2024-09-15 08:45:03 +00:00
// We do fast and loose matching on strings here instead of
// parsing the address and the IP and doing "proper" checks,
// to keep things fast and generate less garbage.
if strings.Contains(addr.Address, "[") {
seenIPv6 = true
2024-09-15 08:45:03 +00:00
if strings.Contains(addr.Address, "[2") {
seenIPv6GUA = true
}
} else {
seenIPv4 = true
2023-10-26 13:07:52 +00:00
}
2024-09-15 08:45:03 +00:00
if seenIPv4 && seenIPv6 && seenIPv6GUA {
break
}
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
if seenIPv4 {
currentIPv4++
}
if seenIPv6 {
currentIPv6++
}
2024-09-15 08:45:03 +00:00
if seenIPv6GUA {
currentIPv6GUA++
}
case rec.Seen > cutoff24h:
last24h++
case rec.Seen > cutoff1w:
last1w++
default:
// drop the record if it's older than a week
s.m.Delete(key)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
return true
})
databaseKeys.WithLabelValues("current").Set(float64(current))
databaseKeys.WithLabelValues("currentIPv4").Set(float64(currentIPv4))
databaseKeys.WithLabelValues("currentIPv6").Set(float64(currentIPv6))
2024-09-15 08:45:03 +00:00
databaseKeys.WithLabelValues("currentIPv6GUA").Set(float64(currentIPv6GUA))
databaseKeys.WithLabelValues("last24h").Set(float64(last24h))
databaseKeys.WithLabelValues("last1w").Set(float64(last1w))
databaseStatisticsSeconds.Set(time.Since(now).Seconds())
}
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
func (s *inMemoryStore) write() (err error) {
t0 := time.Now()
defer func() {
if err == nil {
databaseWriteSeconds.Set(time.Since(t0).Seconds())
databaseLastWritten.Set(float64(t0.Unix()))
}
}()
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
dbf := path.Join(s.dir, "records.db")
fd, err := os.Create(dbf + ".tmp")
if err != nil {
return err
}
bw := bufio.NewWriter(fd)
var buf []byte
var rangeErr error
now := s.clock.Now()
cutoff1w := now.Add(-7 * 24 * time.Hour).UnixNano()
2024-09-10 17:41:22 +00:00
n := 0
s.m.Range(func(key protocol.DeviceID, value DatabaseRecord) bool {
2024-09-10 17:41:22 +00:00
if n%1000 == 0 {
runtime.Gosched()
}
n++
if value.Seen < cutoff1w {
// drop the record if it's older than a week
return true
}
rec := ReplicationRecord{
Key: key[:],
Addresses: value.Addresses,
Seen: value.Seen,
}
s := rec.Size()
if s+4 > len(buf) {
buf = make([]byte, s+4)
}
n, err := rec.MarshalTo(buf[4:])
if err != nil {
rangeErr = err
return false
}
binary.BigEndian.PutUint32(buf, uint32(n))
if _, err := bw.Write(buf[:n+4]); err != nil {
rangeErr = err
return false
}
return true
})
if rangeErr != nil {
_ = fd.Close()
return rangeErr
}
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
if err := bw.Flush(); err != nil {
_ = fd.Close
return err
}
if err := fd.Close(); err != nil {
return err
}
if err := os.Rename(dbf+".tmp", dbf); err != nil {
return err
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
// Upload to S3
if s.s3 != nil {
fd, err = os.Open(dbf)
if err != nil {
log.Printf("Error uploading database to S3: %v", err)
return nil
}
defer fd.Close()
if err := s.s3.Upload(fd, s.objKey); err != nil {
log.Printf("Error uploading database to S3: %v", err)
}
log.Println("Finished uploading database")
}
return nil
}
func (s *inMemoryStore) read() (int, error) {
fd, err := os.Open(path.Join(s.dir, "records.db"))
if err != nil {
return 0, err
}
defer fd.Close()
br := bufio.NewReader(fd)
var buf []byte
nr := 0
for {
var n uint32
if err := binary.Read(br, binary.BigEndian, &n); err != nil {
2024-09-10 17:41:22 +00:00
if errors.Is(err, io.EOF) {
break
}
return nr, err
}
if int(n) > len(buf) {
buf = make([]byte, n)
}
if _, err := io.ReadFull(br, buf[:n]); err != nil {
return nr, err
}
rec := ReplicationRecord{}
if err := rec.Unmarshal(buf[:n]); err != nil {
return nr, err
}
key, err := protocol.DeviceIDFromBytes(rec.Key)
if err != nil {
key, err = protocol.DeviceIDFromString(string(rec.Key))
}
if err != nil {
log.Println("Bad device ID:", err)
continue
}
2024-09-10 09:51:07 +00:00
slices.SortFunc(rec.Addresses, DatabaseAddress.Cmp)
rec.Addresses = slices.CompactFunc(rec.Addresses, DatabaseAddress.Equal)
s.m.Store(key, DatabaseRecord{
Addresses: expire(rec.Addresses, s.clock.Now()),
Seen: rec.Seen,
})
nr++
}
return nr, nil
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
// merge returns the merged result of the two database records a and b. The
// result is the union of the two address sets, with the newer expiry time
// chosen for any duplicates. The address list in a is overwritten and
// reused for the result.
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
func merge(a, b DatabaseRecord) DatabaseRecord {
// Both lists must be sorted for this to work.
a.Seen = max(a.Seen, b.Seen)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
aIdx := 0
bIdx := 0
for aIdx < len(a.Addresses) && bIdx < len(b.Addresses) {
switch cmp.Compare(a.Addresses[aIdx].Address, b.Addresses[bIdx].Address) {
case 0:
// a == b, choose the newer expiry time
a.Addresses[aIdx].Expires = max(a.Addresses[aIdx].Expires, b.Addresses[bIdx].Expires)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
aIdx++
bIdx++
case -1:
// a < b, keep a and move on
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
aIdx++
case 1:
// a > b, insert b before a
a.Addresses = append(a.Addresses[:aIdx], append([]DatabaseAddress{b.Addresses[bIdx]}, a.Addresses[aIdx:]...)...)
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
bIdx++
}
}
if bIdx < len(b.Addresses) {
a.Addresses = append(a.Addresses, b.Addresses[bIdx:]...)
}
return a
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
// expire returns the list of addresses after removing expired entries.
// Expiration happen in place, so the slice given as the parameter is
// destroyed. Internal order is preserved.
func expire(addrs []DatabaseAddress, now time.Time) []DatabaseAddress {
cutoff := now.UnixNano()
naddrs := addrs[:0]
for i := range addrs {
if i > 0 && addrs[i].Address == addrs[i-1].Address {
// Skip duplicates
continue
}
if addrs[i].Expires >= cutoff {
naddrs = append(naddrs, addrs[i])
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
}
if len(naddrs) == 0 {
return nil
}
return naddrs
cmd/stdiscosrv: New discovery server (fixes #4618) This is a new revision of the discovery server. Relevant changes and non-changes: - Protocol towards clients is unchanged. - Recommended large scale design is still to be deployed nehind nginx (I tested, and it's still a lot faster at terminating TLS). - Database backend is leveldb again, only. It scales enough, is easy to setup, and we don't need any backend to take care of. - Server supports replication. This is a simple TCP channel - protect it with a firewall when deploying over the internet. (We deploy this within the same datacenter, and with firewall.) Any incoming client announces are sent over the replication channel(s) to other peer discosrvs. Incoming replication changes are applied to the database as if they came from clients, but without the TLS/certificate overhead. - Metrics are exposed using the prometheus library, when enabled. - The database values and replication protocol is protobuf, because JSON was quite CPU intensive when I tried that and benchmarked it. - The "Retry-After" value for failed lookups gets slowly increased from a default of 120 seconds, by 5 seconds for each failed lookup, independently by each discosrv. This lowers the query load over time for clients that are never seen. The Retry-After maxes out at 3600 after a couple of weeks of this increase. The number of failed lookups is stored in the database, now and then (avoiding making each lookup a database put). All in all this means clients can be pointed towards a cluster using just multiple A / AAAA records to gain both load sharing and redundancy (if one is down, clients will talk to the remaining ones). GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00
}
2024-09-10 09:51:07 +00:00
func (d DatabaseAddress) Cmp(other DatabaseAddress) (n int) {
if c := cmp.Compare(d.Address, other.Address); c != 0 {
return c
}
return cmp.Compare(d.Expires, other.Expires)
}
func (d DatabaseAddress) Equal(other DatabaseAddress) bool {
return d.Address == other.Address
}