gui, man, authors: Update docs, translations, and contributors

AUTHORS

@@ -101,6 +101,7 @@ Elliot Huffman <thelich2@gmail.com>
 Emil Hessman (ceh) <emil@hessman.se>
 Eng Zer Jun <engzerjun@gmail.com>
 Eric Lesiuta <elesiuta@gmail.com>
+Eric P <eric@kastelo.net>
 Erik Meitner (WSGCSysadmin) <e.meitner@willystreet.coop>
 Evan Spensley <94762716+0evan@users.noreply.github.com>
 Evgeny Kuznetsov <evgeny@kuznetsov.md>

gui/default/assets/lang/lang-bg.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Преминаване през NAT",
     "Enable Relaying": "Ретранслация",
     "Enabled": "Включено",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Когато е отметнато разширените атрибути се изпращат към другите устройства, а получените разширени атрибути се прилагат. Обикновено изисква съответните за целта права.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Когато е отметнато разширените атрибути се изпращат към другите устройства, но получените разширени атрибути не се прилагат. Може да има значително неблагоприятно влияние върху производителността. Винаги е отметнато когато „Синхронизиране на разширени атрибути“ е отметнато.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Когато е отметнато информацията за собственост се изпраща към другите устройства, а получената информация за собственост се прилага. Обикновено изисква съответните за целта права.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Когато е отметнато информацията за собственост се изпраща към другите устройства, но получената информация за собственост не се прилага. Може да има значително неблагоприятно влияние върху производителността. Винаги е отметнато когато „Синхронизиране на собственост“ е отметнато.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Въведете положително число (например „3.14“) и изберете единица мярка. Процентите са части от цялото дисково пространство.",
     "Enter a non-privileged port number (1024 - 65535).": "Въведете номер на непривилегирован порт (1024-65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведете адреси, разделени със запетая („tcp://ip:port“, „tcp://host:port“) или „dynamic“, за автоматично откриване на наличните адреси.",
     "Enter ignore patterns, one per line.": "Въведете шаблони за пренебрегване, по един на ред.",
     "Enter up to three octal digits.": "Въведете до три осмични цифри.",
     "Error": "Грешка",
+    "Extended Attributes": "Разширени атрибути",
     "External": "Външни",
     "External File Versioning": "Външно управление на версии",
     "Failed Items": "Елементи с грешка",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ограничение при качване (KiB/s)",
     "Override": "Налагане",
     "Override Changes": "Налагане на местни промени",
+    "Ownership": "Собственост",
     "Path": "Път",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Път до папката на това устройство. Ако не съществува ще бъде създадена. Символът тилда (~) може да бъде използван вместо",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Папка, в която да бъдат запазвани версиите (оставете празно за подразбираната директория .stversions в споделената папка).",
@@ -304,7 +310,9 @@
     "Select latest version": "Избиране на най-новата версия",
     "Select oldest version": "Избиране на на най-старата версия",
     "Send & Receive": "Изпраща и получава",
+    "Send Extended Attributes": "Изпращане на разширени атрибути",
     "Send Only": "Само изпраща",
+    "Send Ownership": "Изпращане на собственост",
     "Set Ignores on Added Folder": "Добавяне на шаблони за пренебрегване",
     "Settings": "Настройки",
     "Share": "Споделяне",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Съхранява и синхронизира само шифровани данни. Папките на всички свързани устройства трябва да бъдат настроени със същата парола или също да са от вида „{{receiveEncrypted}}“.",
     "Support": "Помощ",
     "Support Bundle": "Архив за поддръжка",
+    "Sync Extended Attributes": "Синхронизиране на разширени атрибути",
+    "Sync Ownership": "Синхронизиране на собственост",
     "Sync Protocol Listen Addresses": "Адрес, на който слуша синхронизиращия протокол",
     "Sync Status": "Състояние",
     "Syncing": "Синхронизиране",

gui/default/assets/lang/lang-cs.json

@@ -36,7 +36,7 @@
     "Are you sure you want to restore {%count%} files?": "Opravdu chcete obnovit {{count}} souborů?",
     "Are you sure you want to revert all local changes?": "Skutečně si přejete vrátit všechny lokální změny?",
     "Are you sure you want to upgrade?": "Skutečně chcete provést aktualizaci?",
-    "Authors": "Authors",
+    "Authors": "Autoři",
     "Auto Accept": "Přijmout automaticky",
     "Automatic Crash Reporting": "Automatické hlášení pádů",
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatická aktualizace nyní nabízí volbu mezi stabilními vydáními a kandidáty na ně.",
@@ -56,8 +56,8 @@
     "Command": "Příkaz",
     "Comment, when used at the start of a line": "Pokud použito na jeho začátku, je řádek považován za komentář",
     "Compression": "Komprese",
-    "Configuration Directory": "Configuration Directory",
-    "Configuration File": "Configuration File",
+    "Configuration Directory": "Konfigurační složka",
+    "Configuration File": "Konfigurační soubor",
     "Configured": "Nastaveno",
     "Connected (Unused)": "Připojeno (nepoužité)",
     "Connection Error": "Chyba připojení",
@@ -69,7 +69,7 @@
     "Currently Shared With Devices": "Aktuálně sdíleno se zařízeními",
     "Custom Range": "Přesný rozsah",
     "Danger!": "Nebezpečí!",
-    "Database Location": "Database Location",
+    "Database Location": "Umístění databáze",
     "Debugging Facilities": "Nástroje pro ladění",
     "Default Configuration": "Výchozí nastavení",
     "Default Device": "Výchozí zařízení",
@@ -84,7 +84,7 @@
     "Deselect folders to stop sharing with this device.": "Zrušte výběr složek, které se mají přestat sdílet s tímto zařízením.",
     "Device": "Zařízení",
     "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Zařízení „{{name}}“ ({{device}} na {{address}}) se chce připojit. Přidat nové zařízení?",
-    "Device Certificate": "Device Certificate",
+    "Device Certificate": "Certifikát zařízení",
     "Device ID": "Identifikátor zařízení",
     "Device Identification": "Identifikace zařízení",
     "Device Name": "Název zařízení",
@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Povolit průchod skrze NAT překlad",
     "Enable Relaying": "Povolit přenašeče (relay)",
     "Enabled": "Zapnuto",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Umožňuje odesílat rozšířené atributy do dalších zařízení a aplikovat příchozí rozšířené atributy. Může vyžadovat spuštění se zvýšeným oprávněním.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Umožňuje odesílat rozšířené atributy do dalších zařízení, ale ne aplikaci příchozích rozšířených atributů. Může přínést výrazné zhoršení výkonu. Automaticky povoleno, když je povoleno  „Synchronizovat rozšířené atributy.“",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Umožňuje odesílat informace o vlastnictví do dalších zařízení a aplikovat příchozí vlastnictví. Typicky vyžaduje spuštění s vyšším oprávněním.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Umožňuje odesílat vlastnictví do dalších zařízení, ale ne aplikovat příchozí vlastnictví. Automaticky povoleno, když je povoleno  „Synchronizovat vlastnictví.“",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Zadejte kladné číslo (např. „2.35“) a zvolte jednotku. Procenta znamenají část celkové velikosti úložiště.",
     "Enter a non-privileged port number (1024 - 65535).": "Zadejte číslo neprivilegovaného portu (1024-65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadejte adresy oddělené čárkami („tcp://ip:port“, „tcp://host:port“) nebo „dynamic“ pro automatické objevení adresy.",
     "Enter ignore patterns, one per line.": "Zadejte vzory toho, co ignorovat – každý na zvlášť řádek.",
     "Enter up to three octal digits.": "Zadejte nanejvýš tři osmičkové číslice.",
     "Error": "Chyba",
+    "Extended Attributes": "Rozšířené atributy",
     "External": "Externí",
     "External File Versioning": "Externí správa verzí souborů",
     "Failed Items": "Nezdařené položky",
@@ -155,15 +160,15 @@
     "Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.": "Typ složky „{{receiveEncrypted}}“ nelze změnit po přidání složky. Je třeba složku odebrat, data na disku vymazat nebo rozšifrovat, a nakonec vytvořit složku znova.",
     "Folders": "Složky",
     "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.": "Pokus o spuštění sledování změn v těchto složkách se nezdařil. Bude se to opětovně zkoušet každou minutu, takže se to možná brzo povede. Pokud ne, pokuste se najít příčinu. případně požádejte o pomoc.",
-    "Forever": "Forever",
+    "Forever": "Navždy",
     "Full Rescan Interval (s)": "Interval plného skenu (sek.)",
     "GUI": "Grafické rozhraní",
-    "GUI / API HTTPS Certificate": "GUI / API HTTPS Certificate",
+    "GUI / API HTTPS Certificate": "Certifikát GUI / API HTTPS",
     "GUI Authentication Password": "Přihlašovací heslo pro GUI",
     "GUI Authentication User": "Přihlašovací jméno pro GUI",
     "GUI Authentication: Set User and Password": "Ověřování v graf. uživatelském rozhraní: Nastavit uživatele a heslo",
     "GUI Listen Address": "Adresa, na které GUI očekává spojení",
-    "GUI Override Directory": "GUI Override Directory",
+    "GUI Override Directory": "Složka pro GUI Override",
     "GUI Theme": "Motiv vzhledu pro GUI",
     "General": "Obecné",
     "Generate": "Vytvořit",
@@ -183,10 +188,10 @@
     "Ignored Devices": "Ignorovaná zařízení",
     "Ignored Folders": "Ignorované složky",
     "Ignored at": "Ignorováno v",
-    "Included Software": "Included Software",
+    "Included Software": "Použitý software",
     "Incoming Rate Limit (KiB/s)": "Omezení příchozí rychlosti (KiB/s)",
     "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Nesprávné nastavení může poškodit obsah Vašich složek a znefunkčnít Syncthing.",
-    "Internally used paths:": "Internally used paths:",
+    "Internally used paths:": "Interně používané cesty:",
     "Introduced By": "Zavedeno od",
     "Introducer": "Zavaděč",
     "Inversion of the given condition (i.e. do not exclude)": "Převrácení dané podmínky (např. nevynechat)",
@@ -212,7 +217,7 @@
     "Local State (Total)": "Místní status (Celkem)",
     "Locally Changed Items": "Lokálně změněné položky",
     "Log": "Záznam událostí",
-    "Log File": "Log File",
+    "Log File": "Soubor logů",
     "Log tailing paused. Scroll to the bottom to continue.": "Zaznamenávání událostí pozastaveno. Sjeďte dolů pro pokračování.",
     "Logs": "Záznamy událostí",
     "Major Upgrade": "Aktualizace hlavní verze",
@@ -244,10 +249,11 @@
     "Outgoing Rate Limit (KiB/s)": "Omezení odchozí rychlosti (KiB/s)",
     "Override": "Přebít",
     "Override Changes": "Přebít změny na ostatních",
+    "Ownership": "Vlastnictví",
     "Path": "Popis umístění",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Popis umístění složky na tomto počítači. Pokud neexistuje, bude vytvořeno. Znak vlnovky (~) může být použit jako zkratka pro",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Popis umístění, ve kterém ukládat verze (ponechte prázdné pro výchozí podsložku .stversions ve sdílené složce).",
-    "Paths": "Paths",
+    "Paths": "Cesty",
     "Pause": "Pozastavit",
     "Pause All": "Pozastavit vše",
     "Paused": "Pozastaveno",
@@ -304,7 +310,9 @@
     "Select latest version": "Vybrat nejnovější verzi",
     "Select oldest version": "Vybrat nejstarší verzi",
     "Send & Receive": "Odesílací a přijímací",
+    "Send Extended Attributes": "Odesílat rozšířené atributy",
     "Send Only": "Pouze odesílací",
+    "Send Ownership": "Odesílat vlastnictví",
     "Set Ignores on Added Folder": "Promítnout ignorování do přidané složky.",
     "Settings": "Nastavení",
     "Share": "Sdílet",
@@ -322,7 +330,7 @@
     "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Zobrazeno místo identifikátoru zařízení na náhledu stavu clusteru. Pokud nebude vyplněno, bude nastaveno na název, který zařízení odesílá.",
     "Shutdown": "Vypnout",
     "Shutdown Complete": "Vypnutí dokončeno",
-    "Simple": "Simple",
+    "Simple": "Jednoduché",
     "Simple File Versioning": "Jednoduchá správa verzí souborů",
     "Single level wildcard (matches within a directory only)": "Jednoúrovňový zástupný znak (shody pouze uvnitř složky)",
     "Size": "Velikost",
@@ -334,7 +342,7 @@
     "Stable releases and release candidates": "Stabilní vydání a kandidáti na vydání",
     "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabilní vydání jsou opožděna zhruba o dva týdny. Po tuto dobu se testují jako kandidáti na vydání.",
     "Stable releases only": "Pouze stabilní vydání",
-    "Staggered": "Staggered",
+    "Staggered": "Po stupních",
     "Staggered File Versioning": "Správa verzí souborů po stupních",
     "Start Browser": "Otevřít webový prohlížeč",
     "Statistics": "Statistiky",
@@ -342,8 +350,10 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Ukládá a synchronizuje pouze zašifrovaná data. Složky na všech připojených zařízeních musí mít nastavené stejné heslo a nebo být také typu „{{receiveEncrypted}}“.",
     "Support": "Podpora",
     "Support Bundle": "Balík podpory",
+    "Sync Extended Attributes": "Synchronizovat rozšířené atributy",
+    "Sync Ownership": "Synchronizovat vlastnictví",
     "Sync Protocol Listen Addresses": "Adresa, na které synchronizační protokol očekává spojení",
-    "Sync Status": "Sync Status",
+    "Sync Status": "Synchronizovat stav",
     "Syncing": "Synchronizuje se",
     "Syncthing has been shut down.": "Syncthing bylo vypnuto.",
     "Syncthing includes the following software or portions thereof:": "Syncthing obsahuje následující software nebo jejich část:",
@@ -386,8 +396,8 @@
     "The number of versions must be a number and cannot be blank.": "Je třeba, aby počet verzí bylo číslo a nemůže zůstat nevyplněné.",
     "The path cannot be blank.": "Popis umístění nemůže zůstat nevyplněný.",
     "The rate limit must be a non-negative number (0: no limit)": "Je třeba, aby limit rychlosti bylo kladné číslo (0: bez limitu)",
-    "The remote device has not accepted sharing this folder.": "The remote device has not accepted sharing this folder.",
-    "The remote device has paused this folder.": "The remote device has paused this folder.",
+    "The remote device has not accepted sharing this folder.": "Vzdálené zařízení neakceptovalo sdílení této složky.",
+    "The remote device has paused this folder.": "Vzdálené zařízení pozastavilo sdílení této složky.",
     "The rescan interval must be a non-negative number of seconds.": "Je třeba, aby interval opakování skenování bylo kladné číslo.",
     "There are no devices to share this folder with.": "Nejsou žádná zařízení, se kterými lze sdílet tuto složku.",
     "There are no file versions to restore.": "Žádné verze souboru k obnovení.",
@@ -402,7 +412,7 @@
     "Time": "Čas",
     "Time the item was last modified": "Čas poslední modifikace položky",
     "Today": "Dnes",
-    "Trash Can": "Trash Can",
+    "Trash Can": "Koš",
     "Trash Can File Versioning": "Ponechávat jednu předchozí verzi (jako Koš) ",
     "Twitter": "Twitter",
     "Type": "Typ",
@@ -419,7 +429,7 @@
     "Unshared Folders": "Nesdílené složky",
     "Untrusted": "Bez důvěry",
     "Up to Date": "Aktuální",
-    "Updated {%file%}": "Updated {{file}}",
+    "Updated {%file%}": "Aktualizován soubor {{file}}",
     "Upgrade": "Přechod na novější verzi",
     "Upgrade To {%version%}": "Aktualizovat na {{version}}",
     "Upgrading": "Aktualizuje se",
@@ -428,7 +438,7 @@
     "Usage reporting is always enabled for candidate releases.": "Hlášení o používání je pro kandidáty na vydání vždy zapnuto.",
     "Use HTTPS for GUI": "Použít pro grafické rozhraní zabezpečení HTTPS",
     "Use notifications from the filesystem to detect changed items.": "Použít oznamování soubor. systému pro nalezení změněných položek.",
-    "User Home": "User Home",
+    "User Home": "Domácí adresář uživatele",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Pro ověřování v grafickém uživatelském rozhraní nebylo nastaveno uživatelské jméno / heslo. Prosím zvažte nastavení nějakého.",
     "Version": "Verze",
     "Versions": "Verze",

gui/default/assets/lang/lang-da.json

@@ -57,7 +57,7 @@
     "Comment, when used at the start of a line": "Kommentar, når den bruges i starten af en linje",
     "Compression": "Anvend komprimering",
     "Configuration Directory": "Konfigurationsmappe",
-    "Configuration File": "Configuration File",
+    "Configuration File": "Konfiguration fil",
     "Configured": "Konfigureret",
     "Connected (Unused)": "Tilsluttet (ubrugt)",
     "Connection Error": "Tilslutnings fejl",
@@ -69,7 +69,7 @@
     "Currently Shared With Devices": "i øjeblikket delt med enheder",
     "Custom Range": "Tilpasset interval",
     "Danger!": "Fare!",
-    "Database Location": "Database Location",
+    "Database Location": "Database placering",
     "Debugging Facilities": "Faciliteter til fejlretning",
     "Default Configuration": "Standard opsætning",
     "Default Device": "Standard enhed",
@@ -84,7 +84,7 @@
     "Deselect folders to stop sharing with this device.": "Fravælg mapper for at stoppe deling med denne enhed.",
     "Device": "Enhed",
     "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Enheden “{{name}}” ({{device}} på {{address}}) vil gerne forbinde. Tilføj denne enhed?",
-    "Device Certificate": "Device Certificate",
+    "Device Certificate": "Enhed certifikat",
     "Device ID": "Enheds-ID",
     "Device Identification": "Enhedsidentifikation",
     "Device Name": "Enhedsnavn",
@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Aktivér NAT-traversering",
     "Enable Relaying": "Aktivér videresending",
     "Enabled": "Aktiveret",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Indtast et ikke-negativt tal (fx “2,35”) og vælg en enhed. Procentsatser er ud fra total diskstørrelse.",
     "Enter a non-privileged port number (1024 - 65535).": "Indtast et ikke-priviligeret portnummer (1024–65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Angiv en kommaadskilt adresseliste (\"tcp://ip:port\", \"tcp://host:port\")  eller \"dynamic\" for automatisk at opdage adressen.",
     "Enter ignore patterns, one per line.": "Indtast ignoreringsmønstre, ét per linje.",
     "Enter up to three octal digits.": "Indtast op til tre oktale cifre.",
     "Error": "Fejl",
+    "Extended Attributes": "Extended Attributes",
     "External": "Eksternt",
     "External File Versioning": "Ekstern filversionering",
     "Failed Items": "Mislykkede filer",
@@ -155,7 +160,7 @@
     "Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.": "Folder type \"{{receiveEncrypted}}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.",
     "Folders": "Mapper",
     "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.": "For de følgende mapper opstod en fejl ved start på overvågning af ændringer. Der prøves igen hvert minut, så fejlene går eventuelt væk snart. Hvis de forbliver, kan du prøve at rette den tilgrundliggende fejl eller spørge efter hjælp, hvis du ikke kan.",
-    "Forever": "Forever",
+    "Forever": "For altid",
     "Full Rescan Interval (s)": "Interval for komplet genskan (sek.)",
     "GUI": "GUI",
     "GUI / API HTTPS Certificate": "GUI / API HTTPS Certificate",
@@ -183,10 +188,10 @@
     "Ignored Devices": "Ignorerede enheder",
     "Ignored Folders": "Ignorerede mapper",
     "Ignored at": "Ignoreret på",
-    "Included Software": "Included Software",
+    "Included Software": "Inkluderet software",
     "Incoming Rate Limit (KiB/s)": "Indgående hastighedsbegrænsning (KiB/s)",
     "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Ukorrekt opsætning kan skade dine data og gøre Syncthing ude af stand til at fungere.",
-    "Internally used paths:": "Internally used paths:",
+    "Internally used paths:": "Intern brugte stier:",
     "Introduced By": "Introduceret af",
     "Introducer": "Introducerende enhed",
     "Inversion of the given condition (i.e. do not exclude)": "Det omvendte (dvs. undlad ikke)",
@@ -244,10 +249,11 @@
     "Outgoing Rate Limit (KiB/s)": "Udgående hastighedsbegrænsning (KiB/s)",
     "Override": "Tilsidesæt",
     "Override Changes": "Overskriv ændringer",
+    "Ownership": "Ownership",
     "Path": "Sti",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sti til den lokale mappe. Vil blive oprettet hvis den ikke findes. Tildetegnet (~) kan bruges som en forkortelse for",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Sti hvor versioner skal gemmes (lad være tomt for at bruge .stversions-mappen i den delte mappe).",
-    "Paths": "Paths",
+    "Paths": "Stier",
     "Pause": "Pause",
     "Pause All": "Sæt alt på pause",
     "Paused": "På pause",
@@ -304,7 +310,9 @@
     "Select latest version": "Vælg seneste version",
     "Select oldest version": "Vælg ældste version",
     "Send & Receive": "Send og modtag",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Send kun",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Sæt ignorerer på tilføjet mappe",
     "Settings": "Indstillinger",
     "Share": "Del",
@@ -342,8 +350,10 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Støt",
     "Support Bundle": "Støttepakke",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Lytteadresser for synkroniseringsprotokol",
-    "Sync Status": "Sync Status",
+    "Sync Status": "Synkronisering status",
     "Syncing": "Synkroniserer",
     "Syncthing has been shut down.": "Syncthing er lukket ned.",
     "Syncthing includes the following software or portions thereof:": "Syncthing indeholder følgende software eller dele heraf:",

gui/default/assets/lang/lang-de.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT-Durchdringung aktivieren",
     "Enable Relaying": "Weiterleitung aktivieren",
     "Enabled": "Aktiviert",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Bewirkt das Senden erweiterter Attribute an andere Geräte und das Anwenden empfangener erweiterter Attribute. Erfordert ggf. die Ausführung mit höheren Zugriffsrechten.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Bewirkt das Senden erweiterter Attribute an andere Geräte, jedoch ohne empfangene erweiterte Attribute anzuwenden. Kann zu einem merklichen Leistungseinbruch führen. Immer aktiviert, wenn \"Erweiterte Attribute synchronisieren\" eingeschaltet ist.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Bewirkt das Senden der Besitzinformation an andere Geräte und das Anwenden empfangener Besitzinformation. Erfordert üblicherweise die Ausführung mit höheren Zugriffsrechten.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Bewirkt das Senden von Besitzinformation an andere Geräte, jedoch ohne empfangene Besitzinformation anzuwenden. Kann zu einem merklichen Leistungseinbruch führen. Immer aktiviert, wenn \"Besitzinformation synchronisieren\" eingeschaltet ist.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Geben Sie eine positive Zahl ein (z.B. \"2.35\") und wählen Sie eine Einheit. Prozentsätze sind Teil der gesamten Festplattengröße.",
     "Enter a non-privileged port number (1024 - 65535).": "Geben Sie eine nichtprivilegierte Portnummer ein (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Kommagetrennte Adressen (\"tcp://ip:port\", \"tcp://host:port\") oder \"dynamic\" eingeben, um die Adresse automatisch zu ermitteln.",
     "Enter ignore patterns, one per line.": "Geben Sie Ignoriermuster ein, eines pro Zeile.",
     "Enter up to three octal digits.": "Tragen Sie bis zu drei oktale Ziffern ein.",
     "Error": "Fehler",
+    "Extended Attributes": "Erweiterte Dateiattribute",
     "External": "Extern",
     "External File Versioning": "Externe Dateiversionierung",
     "Failed Items": "Fehlgeschlagene Elemente",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ausgehendes Datenratelimit (KiB/s)",
     "Override": "Überschreiben",
     "Override Changes": "Änderungen überschreiben",
+    "Ownership": "Besitzer",
     "Path": "Pfad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Ordner auf dem lokalen Gerät. Ordner wird erzeugt, wenn er nicht existiert. Das Tilden-Zeichen (~) kann als Abkürzung benutzt werden für",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Pfad in dem Versionen gespeichert werden sollen (leer lassen, wenn der Standard .stversions Ordner für den geteilten Ordner verwendet werden soll).",
@@ -304,7 +310,9 @@
     "Select latest version": "Letzte Version auswählen",
     "Select oldest version": "Älteste Version auswählen",
     "Send & Receive": "Senden & Empfangen",
+    "Send Extended Attributes": "Erweitere Attribute senden",
     "Send Only": "Nur senden",
+    "Send Ownership": "Besitzinformation senden",
     "Set Ignores on Added Folder": "Ignoriermuster für neuen Ordner setzen",
     "Settings": "Einstellungen",
     "Share": "Teilen",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Speichert und synchronisiert nur verschlüsselte Daten. Ordner auf allen verbundenen Geräten müssen mit dem selben Passwort eingerichtet werden oder vom Typ \"{{receiveEncrypted}}\" sein.",
     "Support": "Support",
     "Support Bundle": "Supportpaket",
+    "Sync Extended Attributes": "Erweiterte Attribute synchronisieren",
+    "Sync Ownership": "Besitzinformation synchronisieren",
     "Sync Protocol Listen Addresses": "Adresse(n) für das Synchronisierungsprotokoll",
     "Sync Status": "Status der Synchronisierung",
     "Syncing": "Synchronisiere",

gui/default/assets/lang/lang-el.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Ενεργοποίηση διάσχισης NAT",
     "Enable Relaying": "Ενεργοποίηση αναμετάδοσης",
     "Enabled": "Ενεργοποιημένη",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Εισάγετε έναν μη αρνητικό αριθμό (π.χ. «2.35») και επιλέξτε μια μονάδα μέτρησης. Τα ποσοστά ισχύουν ως προς το συνολικό μέγεθος του δίσκου.",
     "Enter a non-privileged port number (1024 - 65535).": "Εισάγετε τον αριθμό μιας μη δεσμευμένης θύρας (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Εισάγετε τις διευθύνσεις χωρισμένες με κόμμα (\"tcp://ip:θύρα\", \"tcp://όνομα:θύρα\") ή γράψτε \"dynamic\" για την αυτόματη ανεύρεση τους.",
     "Enter ignore patterns, one per line.": "Δώσε τα πρότυπα που θα αγνοηθούν, ένα σε κάθε γραμμή.",
     "Enter up to three octal digits.": "Εισάγετε έως τρία οκταδικά ψηφία.",
     "Error": "Σφάλμα",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Εξωτερική τήρηση εκδόσεων",
     "Failed Items": "Αρχεία που απέτυχαν",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Περιορισμός ταχύτητας αποστολής (KiB/s)",
     "Override": "Override",
     "Override Changes": "Να αντικατασταθούν οι αλλαγές",
+    "Ownership": "Ownership",
     "Path": "Μονοπάτι",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Μονοπάτι του φακέλου σε αυτόν τον υπολογιστή. Αν δεν υπάρχει θα δημιουργηθεί. Η περισπωμένη (~) μπορεί να μπει σαν συντόμευση για το",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Ο κατάλογος στον οποίο θα αποθηκεύονται οι εκδόσεις των αρχείων (αν δεν οριστεί, θα αποθηκεύονται στον υποκατάλογο .stversions)",
@@ -304,7 +310,9 @@
     "Select latest version": "Επιλογή τελευταίας έκδοσης",
     "Select oldest version": "Επιλογή παλαιότερης έκδοσης",
     "Send & Receive": "Αποστολή και λήψη",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Μόνο αποστολή",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Ρυθμίσεις",
     "Share": "Διαμοίραση",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Υποστήριξη",
     "Support Bundle": "Πακέτο υποστήριξης",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Διευθύνσεις για το πρωτόκολλο συγχρονισμού",
     "Sync Status": "Sync Status",
     "Syncing": "Συγχρονίζω",

gui/default/assets/lang/lang-en-AU.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Enable NAT traversal",
     "Enable Relaying": "Enable Relaying",
     "Enabled": "Enabled",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
     "Enter up to three octal digits.": "Enter up to three octal digits.",
     "Error": "Error",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "External File Versioning",
     "Failed Items": "Failed Items",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
     "Override": "Override",
     "Override Changes": "Override Changes",
+    "Ownership": "Ownership",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
@@ -304,7 +310,9 @@
     "Select latest version": "Select latest version",
     "Select oldest version": "Select oldest version",
     "Send & Receive": "Send & Receive",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Send Only",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Settings",
     "Share": "Share",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Support",
     "Support Bundle": "Support Bundle",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Sync Protocol Listen Addresses",
     "Sync Status": "Sync Status",
     "Syncing": "Syncing",

gui/default/assets/lang/lang-en-GB.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Enable NAT traversal",
     "Enable Relaying": "Enable Relaying",
     "Enabled": "Enabled",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
     "Enter up to three octal digits.": "Enter up to three octal digits.",
     "Error": "Error",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "External File Versioning",
     "Failed Items": "Failed Items",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
     "Override": "Override",
     "Override Changes": "Override Changes",
+    "Ownership": "Ownership",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
@@ -304,7 +310,9 @@
     "Select latest version": "Select latest version",
     "Select oldest version": "Select oldest version",
     "Send & Receive": "Send & Receive",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Send Only",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Settings",
     "Share": "Share",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Support",
     "Support Bundle": "Support Bundle",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Sync Protocol Listen Addresses",
     "Sync Status": "Sync Status",
     "Syncing": "Syncing",

gui/default/assets/lang/lang-eo.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Ŝaltu trairan NAT",
     "Enable Relaying": "Ŝaltu Relajsadon",
     "Enabled": "Ebligita",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enigu ne negativan nombron (ekz. \"2.35\") kaj elektu uniton. Procentoj estas kiel parto de tuta grandeco de disko.",
     "Enter a non-privileged port number (1024 - 65535).": "Enigu ne privilegiitan numeron de pordo (1024- 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enigu adresojn dividitajn per komoj (\"tcp://ip:port\", \"tcp://host:port\") aŭ \"dynamic\" por elfari aŭtomatan malkovradon de la adreso.",
     "Enter ignore patterns, one per line.": "Enigu ignorantajn ŝablonojn, unu po linio.",
     "Enter up to three octal digits.": "Entajpu ĝis tri okumajn ciferojn.",
     "Error": "Eraro",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Ekstera Versionado de Dosiero",
     "Failed Items": "Malsukcesaj Eroj",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": " Eliranta Rapideco Limo (KiB/s)",
     "Override": "Override",
     "Override Changes": "Transpasi Ŝanĝojn",
+    "Ownership": "Ownership",
     "Path": "Vojo",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Vojo de la dosierujo en la loka komputilo. Kreiĝos se ne ekzistas. La tilda signo (~) povas esti uzata kiel mallongigilo por",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Vojo kies versioj devus esti stokitaj (lasu malplena por la defaŭlta .stversions dosierujo en la komunigita dosierujo).",
@@ -304,7 +310,9 @@
     "Select latest version": "Elekti plej novan version",
     "Select oldest version": "Elekti plej malnovan version",
     "Send & Receive": "Sendi kaj Ricevi",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Nur Sendi",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Agordoj",
     "Share": "Komunigi",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Subteno",
     "Support Bundle": "Pakaĵo por subteno",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Aŭskultado Adresoj de Sinkprotokolo",
     "Sync Status": "Sync Status",
     "Syncing": "Sinkronigas",

gui/default/assets/lang/lang-es-ES.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Permitir NAT transversal",
     "Enable Relaying": "Habilitar Retransmisión",
     "Enabled": "Activado",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introducir direcciones separadas por coma (\"tcp://ip:port\", \"tcp://host:port\") o dinámicas para realizar el descubrimiento automático de la dirección.",
     "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
     "Enter up to three octal digits.": "Ingrese hasta tres dígitos octales.",
     "Error": "Error",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Versionado externo de fichero",
     "Failed Items": "Elementos fallidos",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
     "Override": "Sobreescribir",
     "Override Changes": "Anular cambios",
+    "Ownership": "Ownership",
     "Path": "Parche",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta donde las versiones deben ser almacenadas (dejar vacío para el directorio .stversions por defecto en la carpeta compartida).",
@@ -304,7 +310,9 @@
     "Select latest version": "Selecciona la última versión",
     "Select oldest version": "Selecciona la versión más antigua",
     "Send & Receive": "Enviar y Recibir",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Solo Enviar",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Establecer Ignorados en Carpeta Agregada",
     "Settings": "Ajustes",
     "Share": "Compartir",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Solo almacena y sincroniza datos cifrados. Las carpetas de todos los equipos conectados tienen que ser configuradas con la misma contraseña o ser del tipo \"{{receiveEncrypted}}\" también.",
     "Support": "Forum",
     "Support Bundle": "Lote de Soporte",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Direcciones de escucha del protocolo de sincronización",
     "Sync Status": "Sync Status",
     "Syncing": "Sincronizando",

gui/default/assets/lang/lang-es.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Permitir NAT transversal",
     "Enable Relaying": "Habilitar Retransmisión",
     "Enabled": "Activado",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca direcciones separadas por comas (\"tcp://ip:port\", \"tcp://host:port\") o \"dynamic\" para realizar el descubrimiento automático de la dirección.",
     "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
     "Enter up to three octal digits.": "Introduzca hasta tres dígitos octales.",
     "Error": "Error",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Versionado externo de fichero",
     "Failed Items": "Elementos fallidos",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
     "Override": "Sobreescribir",
     "Override Changes": "Anular cambios",
+    "Ownership": "Ownership",
     "Path": "Ruta",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta donde las versiones deben ser almacenadas (dejar vacío para el directorio .stversions por defecto en la carpeta compartida).",
@@ -304,7 +310,9 @@
     "Select latest version": "Seleccione la última versión",
     "Select oldest version": "Seleccione la versión más antigua",
     "Send & Receive": "Enviar y Recibir",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Solo Enviar",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Establecer Ignorados en Carpeta Agregada",
     "Settings": "Ajustes",
     "Share": "Compartir",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Almacena y sincroniza sólo los datos cifrados. Las carpetas de todos los dispositivos conectados deben estar configuradas con la misma contraseña o ser también del tipo \"{{receiveEncrypted}}\".",
     "Support": "Forum",
     "Support Bundle": "Paquete de Soporte",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Direcciones de escucha del protocolo de sincronización",
     "Sync Status": "Sync Status",
     "Syncing": "Sincronizando",

gui/default/assets/lang/lang-eu.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT translazioa aktibatu",
     "Enable Relaying": "Aldizkatzea posible",
     "Enabled": "Aktibatuta",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatiboa ez den zenbaki bat hauta ezazu (\"2.35\" adib.) bai eta unitate bat. Disko osoaren  ehuneko espazioa",
     "Enter a non-privileged port number (1024 - 65535).": "Abantailatua ez den portu zenbalki bat sar ezazu (1024 - 65535)",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Sartu komaz bereizitako helbideak (\"tcp://ip:port\", \"tcp://host:port\"), edo \"dynamic\" helbidea automatikoki bilatzeko.",
     "Enter ignore patterns, one per line.": "Ezkluzio filtroak sar, lerro bakoitzean bat bakarrik.",
     "Enter up to three octal digits.": "Sartu 3 digitu bitarte",
     "Error": "Hutsa",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Fitxategi bertsioen kanpoko kudeaketa",
     "Failed Items": "Huts egin duten fitxategiak",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Bidaltze emari gehienekoa (KiB/s)",
     "Override": "Gainidatzi",
     "Override Changes": "Aldaketak desegin",
+    "Ownership": "Ownership",
     "Path": "Bidexka",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Lekuko tresnaren partekatzeari buruzko bidea. Ez balitz, asmatu beharko da bat. Programarenari, baitezpadako bide bat sartzen ahal duzu (adibidez \"/home/ni/Sync/Etsenplua\") edo bestenaz bide errelatibo bat (adibidez \"..\\Partekatzeak\\Etsenplua\" - instalazio mugikor batentzat baliagarria). Tildea (~, edo ~+Espazioa Windows XP+Azerty-n) erabil litzateke laburbide gisa",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Kopiak kontserbatzeko bidea (hutsa utz ezazu, .steversioen ohizko bidearentzat, dosier partekatuan)",
@@ -304,7 +310,9 @@
     "Select latest version": "Aukeratu azken bertsioa",
     "Select oldest version": "Aukeratu bertsio zaharrena",
     "Send & Receive": "Igorri eta errezibitu",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Igorrri bakarrik",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Konfigurazioa",
     "Share": "Partekatu",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Enkriptatutako datuak soilik gordetzen eta sinkronizatzen ditu. Konektatutako gailu guztietako karpetak pasahitz berarekin konfiguratu behar dira edo \"{{receiveEncrypted}}\" motakoak izan.",
     "Support": "Foroa",
     "Support Bundle": "Laguntza-sorta",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Sinkronizatu protokoloaren entzun zuzenbideak",
     "Sync Status": "Sync Status",
     "Syncing": "Sinkronizazioa martxan",

gui/default/assets/lang/lang-fi.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Aktivoi osoitteenmuunnoksen kierto",
     "Enable Relaying": "Aktivoi yhteyden välitys",
     "Enabled": "Käytössä",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Laita positiivinen luku (esim. \"2.35\") ja valitse laite. Prosentit ovat osa koko levytilasta.",
     "Enter a non-privileged port number (1024 - 65535).": "Valitse porttinumero vapaalta alueelta (1024-65535)",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Syötä ohituslausekkeet, yksi riviä kohden.",
     "Enter up to three octal digits.": "Enter up to three octal digits.",
     "Error": "Virhe",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Ulkoinen tiedostoversionti",
     "Failed Items": "Epäonnistuneet kohteet",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Uloslähtevän liikenteen rajoitus (KiB/s)",
     "Override": "Override",
     "Override Changes": "Ohita muutokset",
+    "Ownership": "Ownership",
     "Path": "Polku",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Polku kansioon paikallisella tietokoneella. Kansio luodaan, ellei sitä ole olemassa. Tilde-merkkiä (~) voidaan käyttää oikotienä polulle",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Polku, mihin versiot tallennetaan. (Jätä tyhjäksi, jolloin tiedostot tallennetaan .stversions-kansioon jaetun kansion sisällä.)",
@@ -304,7 +310,9 @@
     "Select latest version": "Valitse viimeisin versio",
     "Select oldest version": "Valitse vanhin versio",
     "Send & Receive": "Lähetä & vastaanota",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Vain lähetys",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Asetukset",
     "Share": "Jaa",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Tuki",
     "Support Bundle": "Tukipaketti. (Tiedostot vianselvitystä varten.)",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Synkronointiprotokollan kuunteluosoite",
     "Sync Status": "Sync Status",
     "Syncing": "Synkronoidaan",

gui/default/assets/lang/lang-fr.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Activer la translation d'adresses (NAT)",
     "Enable Relaying": "Relayage possible",
     "Enabled": "Activée",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Nombre positif (p.ex, \"2.35\") et unité. Pourcentage de l'espace disque total.",
     "Enter a non-privileged port number (1024 - 65535).": "Entrez un n° de port non-privilégié (1024 - 65535)",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://hôte:port\") séparées par une virgule, ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
     "Enter ignore patterns, one per line.": "Entrez les masques d'exclusion, un par ligne.",
     "Enter up to three octal digits.": "Entrez jusqu'à 3 chiffres octaux",
     "Error": "Erreur",
+    "Extended Attributes": "Extended Attributes",
     "External": "Gestion externe",
     "External File Versioning": "Gestion externe des versions de fichiers",
     "Failed Items": "Éléments en échec",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite du débit d'envoi (Kio/s)",
     "Override": "Écraser",
     "Override Changes": "Écraser les changements",
+    "Ownership": "Ownership",
     "Path": "Chemin",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Dans l'écran de \"Personnalisation\" des valeurs par défaut (menu Actions/Configuration), ce champ indique le chemin dans lequel les partages acceptés automatiquement seront créés, ainsi que chemin de base suggéré lors de l'enregistrement des nouveaux partages. Le caractère tilde (~) est un raccourci pour votre répertoire personnel {{tilde}} .\nEn création/acceptation manuelle d'un nouveau partage, c'est le chemin vers le répertoire à partager dans l'appareil local. Il sera créé s'il n'existe pas. Vous pouvez entrer un chemin absolu (p.ex \"/home/moi/Sync/Exemple\") ou relatif à celui du programme (p.ex \"..\\Partages\\Exemple\" - utile pour installation portable). Le caractère tilde peut être utilisé comme raccourci vers",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Chemin où les versions seront conservées (laisser vide pour le chemin par défaut de .stversions (caché) dans le partage).\nChemin relatif ou absolu (recommandé), mais dans un répertoire non synchronisé (par masque ou hors du chemin du partage).\nSur la même partition ou système de fichiers (recommandé).",
@@ -304,7 +310,9 @@
     "Select latest version": "Restaurer la dernière version",
     "Select oldest version": "Restaurer la plus ancienne version",
     "Send & Receive": "Envoi & réception",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Envoi (lecture seule)",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Définir des exclusions pour le nouveau partage",
     "Settings": "Configuration",
     "Share": "Partager",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Récupère seulement des données chiffrées. Ce partage sur tous les autres appareils doit aussi être du type \"{{receiveEncrypted}}\" ou bien être défini avec le même mot de passe.",
     "Support": "Forum",
     "Support Bundle": "Kit d'assistance",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Adresses d'écoute du protocole de synchronisation",
     "Sync Status": "État de la synchronisation",
     "Syncing": "Synchronisation en cours",

gui/default/assets/lang/lang-fy.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT-trochkruse ynskeakelje",
     "Enable Relaying": "Trochjaan tastean",
     "Enabled": "Ynskeakele",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Fier in net-negatyf nûmer yn (bygelyks \"2.35\") en selektearje in ienheid. Percentages stean foar it part fan de totale skiifromte.",
     "Enter a non-privileged port number (1024 - 65535).": "Fier in net-befoarrjochte poart-nûmer yn (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Fier troch komma's skieden (\"tcp://ip:port\", \"tcp://host:port\") adressen yn of \"dynamic\" om automatyske ûntdekking fan it adres út te fieren.",
     "Enter ignore patterns, one per line.": "Fier negearpatroanen yn, ien per rigel.",
     "Enter up to three octal digits.": "Fier oant trije oktale nûmers yn.",
     "Error": "Flater",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Ekstern ferzjebehear foar triemen",
     "Failed Items": "Mislearre items",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Uploadfluggenslimyt (KiB/s)",
     "Override": "Override",
     "Override Changes": "Feroarings oerskriuwe",
+    "Ownership": "Ownership",
     "Path": "Paad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Paad nei de map op de lokale kompjûter. Wurd oanmakke as dizze net bestiet. It tilde teken (~) kin brûkt wurde as fluchkeppeling foar",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Paad dêr't de ferzjes bewarre wurde moatte (leech litte foar de standert .stversions-map yn de map).",
@@ -304,7 +310,9 @@
     "Select latest version": "Selektearje de nijste ferzje",
     "Select oldest version": "Selektearje de âldste ferzje",
     "Send & Receive": "Stjoere & Untfange",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Allinnich Stjoere",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Ynstellings",
     "Share": "Diele",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Bewarret en syngroniseart allinich fersifere gegevens. Mappen op alle oansletten apparaten moatte mei itselde wachtwurd ynsteld hawwe of ek fan it type \"{{receiveEncrypted}}\" wêze.",
     "Support": "Help (Forum)",
     "Support Bundle": "Helpbundel",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Sync-protokolharkadressen",
     "Sync Status": "Sync Status",
     "Syncing": "Oan it Syncen",

gui/default/assets/lang/lang-hu.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT bejárás engedélyezése",
     "Enable Relaying": "Közvetítés engedélyezése",
     "Enabled": "Engedélyezve",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Engedélyezi a többi eszköz számára a kiterjesztett attribútumok küldését és a bejövő kiterjesztett attribútumok alkalmazását. Szükség lehet emelt szintű jogosultsággal történő futtatásra.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Engedélyezi a többi eszköz számára a kiterjesztett attribútumok küldését, de nem alkalmazza a bejövő kiterjesztett attribútumokat. Ez jelentős hatással lehet a teljesítményre. Mindig engedélyezve, ha a „Kiterjesztett attribútumok szinkronizálása” engedélyezve van.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Engedélyezi a többi eszköz számára a tulajdonjogi információk küldését és a bejövő tulajdonjogi információk alkalmazását. Tipikusan emelt szintű jogosultsággal történő futtatásra van szükség.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Engedélyezi a többi eszköz számára a tulajdonjogi információk küldését, de nem alkalmazza a bejövő tulajdonjogi információkat. Ez jelentős hatással lehet a teljesítményre. Tipikusan emelt szintű jogosultsággal történő futtatásra van szükség. Mindig engedélyezve, ha a „Tulajdonjog szinkronizálása” engedélyezve van.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Adj meg egy nem-negatív számot (pl. \"2.35\") és válassz egy mértékegységet. A százalékok a teljes lemezméretre vonatkoznak.",
     "Enter a non-privileged port number (1024 - 65535).": "Adj meg egy nem privilegizált port számot (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Vesszővel elválasztva több cím is megadható („tcp://ip:port”, „tcp://kiszolgáló:port”), az automatikus felfedezéshez a „dynamic” kulcsszó használatos. ",
     "Enter ignore patterns, one per line.": "A mellőzési mintákból soronként egyet kell megadni.",
     "Enter up to three octal digits.": "Adjon meg legfeljebb három oktális számjegyet.",
     "Error": "Hiba",
+    "Extended Attributes": "Kiterjesztett attribútumok",
     "External": "Külső",
     "External File Versioning": "Külső fájlverzió-követés",
     "Failed Items": "Hibás elemek",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Kimenő sebességkorlát (KiB/s)",
     "Override": "Felülírás",
     "Override Changes": "Változtatások felülbírálása",
+    "Ownership": "Tulajdonjog",
     "Path": "Útvonal",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "A mappa elérési útvonala az eszközön. Amennyiben nem létezik, a program automatikusan létrehozza. A hullámvonal (~)  a következő helyettesítésre használható: ",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "A verziók tárolására szolgáló elérési út (hagyd üresen a megasztott mappa alapértelmezett .stversions könyvtárának használatához)",
@@ -304,7 +310,9 @@
     "Select latest version": "Legfrissebb verzió kijelölése",
     "Select oldest version": "Legrégebbi verzió kijelölése",
     "Send & Receive": "Küldés és fogadás",
+    "Send Extended Attributes": "Kiterjesztett attribútumok küldése",
     "Send Only": "Csak küldés",
+    "Send Ownership": "Tulajdonjog küldése",
     "Set Ignores on Added Folder": "Mellőzések beállítása a hozzáadott mappán",
     "Settings": "Beállítások",
     "Share": "Megosztás",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Csak titkosított adatokat tárol és szinkronizál. Minden kapcsolatban lévő eszközön a mappákat ugyanazzal a jelszóval kell védeni vagy „{{receiveEncrypted}}” típusúnak kell lenniük.",
     "Support": "Támogatás",
     "Support Bundle": "Támogatási csomag",
+    "Sync Extended Attributes": "Kiterjesztett attribútumok szinkronizálása",
+    "Sync Ownership": "Tulajdonjog szinkronizálása",
     "Sync Protocol Listen Addresses": "Figyelő címek szinkronizációs protokollja",
     "Sync Status": "Szinkronizálási állapot",
     "Syncing": "Szinkronizálás",

gui/default/assets/lang/lang-id.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Aktifkan Traversal NAT",
     "Enable Relaying": "Aktifkan Relay",
     "Enabled": "Aktif",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Masukkan nomor yang bukan negatif (contoh \"2.35\") dan pilih sebuah unit. Persentase adalah bagian dari total ukuran penyimpanan.",
     "Enter a non-privileged port number (1024 - 65535).": "Masukkan nomor port yang tidak \"istimewa\" (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Masukkan alamat yang dipisah oleh koma (\"tcp://ip:port\", \"tcp://host:port\") atau \"dynamic\" untuk melakukan penemuan alamat secara otomatis.",
     "Enter ignore patterns, one per line.": "Masukkan pola pengabaian, satu per baris.",
     "Enter up to three octal digits.": "Masukkan hingga tiga digit oktal.",
     "Error": "Galat",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Pemversian Berkas Eksternal",
     "Failed Items": "Berkas yang gagal",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Batas Kecepatan Unggah (KiB/s)",
     "Override": "Timpa",
     "Override Changes": "Timpa Perubahan",
+    "Ownership": "Ownership",
     "Path": "Lokasi",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Lokasi folder dalam komputer lokal. Akan dibuat jika tidak ada. Karakter tilde (~) dapat digunakan sebagai pintasan untuk",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Lokasi berbagai versi berkas disimpan (tinggalkan kosong untuk menggunakan direktori .stversions bawaan dalam folder).",
@@ -304,7 +310,9 @@
     "Select latest version": "Pilih versi terbaru",
     "Select oldest version": "Pilih versi tertua",
     "Send & Receive": "Kirim & Terima",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Hanya Kirim",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Atur Pengabaian dalam Folder yang Ditambahkan",
     "Settings": "Pengaturan",
     "Share": "Bagi",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Hanya menyimpan dan mensinkronisasi data yang dienkripsi. Folder dalam semua perangkat yang tersambung perlu diatur dengan sandi yang sama atau tipe \"{{receiveEncrypted}}\" juga.",
     "Support": "Bantuan",
     "Support Bundle": "Paket Bantuan",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Alamat Pendengar Protokol Sinkronisasi",
     "Sync Status": "Sync Status",
     "Syncing": "Sinkronisasi",

gui/default/assets/lang/lang-it.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Abilita NAT traversal",
     "Enable Relaying": "Abilita Reindirizzamento",
     "Enabled": "Abilitato",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Inserisci un numero non negativo (ad esempio \"2.35\") e seleziona un'unità. Le percentuali sono parte della dimensione totale del disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Inserisci un numero di porta non-privilegiata (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Inserire gli indirizzi separati da virgola (\"tcp://ip:porta\", \"tcp://host:porta\") o \"dynamic\" per eseguire il rilevamento automatico dell'indirizzo.",
     "Enter ignore patterns, one per line.": "Inserisci gli schemi di esclusione, uno per riga.",
     "Enter up to three octal digits.": "Immetti fino a tre cifre ottali.",
     "Error": "Errore",
+    "Extended Attributes": "Extended Attributes",
     "External": "Esterno",
     "External File Versioning": "Controllo Versione Esterno",
     "Failed Items": "Elementi Errati",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite Velocità in Uscita (KiB/s)",
     "Override": "Sovrascivere",
     "Override Changes": "Ignora le Modifiche",
+    "Ownership": "Ownership",
     "Path": "Percorso",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Percorso della cartella nel computer locale. Verrà creata se non esiste già. Il carattere tilde (~) può essere utilizzato come scorciatoia per",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Percorso di salvataggio delle versioni (lasciare vuoto per utilizzare la cartella predefinita .stversions in questa cartella).",
@@ -304,7 +310,9 @@
     "Select latest version": "Seleziona l'ultima versione",
     "Select oldest version": "Seleziona la versione più vecchia",
     "Send & Receive": "Invia & Ricevi",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Invia Soltanto",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Imposta Esclusioni sulla Cartella Aggiunta",
     "Settings": "Impostazioni",
     "Share": "Condividi",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Memorizza e sincronizza solo i dati crittografati. Le cartelle su tutti i dispositivi collegati devono essere configurate con la stessa password o essere del tipo \"{{receiveEncrypted}}\".",
     "Support": "Supporto",
     "Support Bundle": "Pacchetto di supporto",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Indirizzi di ascolto del Protocollo di Sincronizzazione",
     "Sync Status": "Sync Status",
     "Syncing": "Sincronizzazione in corso",

gui/default/assets/lang/lang-ja.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NATトラバーサルを有効にする",
     "Enable Relaying": "中継サーバー経由の通信を有効にする",
     "Enabled": "有効",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "0以上の数 (例: 2.35) を入力し、単位を選択してください。パーセントはディスク容量全体に対する割合です。",
     "Enter a non-privileged port number (1024 - 65535).": "非特権ポート番号 (1024 - 65535) を入力してください。",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "カンマ区切りのアドレス(\"tcp://ip:port\", \"tcp://host:port\")を入力するか、「dynamic」でアドレスの自動検出を行います。",
     "Enter ignore patterns, one per line.": "無視するファイル名のパターンを、一行につき一条件で入力してください。",
     "Enter up to three octal digits.": "Enter up to three octal digits.",
     "Error": "エラー",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "外部バージョン管理",
     "Failed Items": "失敗した項目",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "上り帯域制限 (KiB/s)",
     "Override": "Override",
     "Override Changes": "他のデバイスの変更を上書きする",
+    "Ownership": "Ownership",
     "Path": "パス",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "ローカルコンピュータ上のフォルダーパス。フォルダーが存在しない場合は作成されます。チルダ (~) で以下のフォルダーを短縮入力できます:",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "古いバージョンを保存するパス (空欄の場合、デフォルトで共有フォルダー内の .stversions ディレクトリ)",
@@ -304,7 +310,9 @@
     "Select latest version": "最も新しいバージョンを選択",
     "Select oldest version": "最も古いバージョンを選択",
     "Send & Receive": "送受信",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "送信のみ",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "設定",
     "Share": "共有",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "サポート",
     "Support Bundle": "Support Bundle",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "同期プロトコルの待ち受けアドレス",
     "Sync Status": "Sync Status",
     "Syncing": "同期中",

gui/default/assets/lang/lang-ko-KR.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT 통과 활성화",
     "Enable Relaying": "중계 활성화",
     "Enabled": "활성화됨",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "확장 특성을 다른 기기로 전송하며 들어오는 확장 특성을 적용합니다. 상승된 권한이 필요할 수도 있습니다.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "확장 특성을 다른 기기로 전송하지만 들어오는 확장 특성은 적용하지 않습니다. 이 설정은 성능에 심각한 영향을 줄 수 있습니다. \"확장 특성 동기화\"와 함께 자동으로 활성화됩니다.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "소유권 정보를 다른 기기로 전송하며 들어오는 소유권 정보를 적용합니다. 일반적으로 상승된 권한이 필요합니다.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "소유권 정보를 다른 기기로 전송하지만 들어오는 소유권 정보는 적용하지 않습니다. 이 설정은 성능에 심각한 영향을 줄 수 있습니다. \"소유권 동기화\"와 함께 자동으로 활성화됩니다.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "양수(예: \"2.35\")를 입력한 후에 단위를 선택하십시오. 백분율은 저장 장치의 총용량에서 계산됩니다.",
     "Enter a non-privileged port number (1024 - 65535).": "비특권 포트 번호(1024~65535)를 입력하십시오.",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "쉼표로 나눈 주소(\"tcp://ip:port\", \"tcp://host:port\") 또는 주소를 자동 탐지해주는 \"dynamic\"을 입력하십시오.",
     "Enter ignore patterns, one per line.": "무시할 양식을 한 줄에 하나씩 입력하십시오.",
     "Enter up to three octal digits.": "최대 3자리의 8진수를 입력하십시오.",
     "Error": "오류",
+    "Extended Attributes": "확장 특성",
     "External": "외부",
     "External File Versioning": "외부 파일 버전 관리",
     "Failed Items": "실패 항목",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "송신 속도 제한(KiB/s)",
     "Override": "덮어쓰기",
     "Override Changes": "변경 항목 덮어쓰기",
+    "Ownership": "소유권",
     "Path": "경로",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "현재 기기에 있는 폴더의 경로입니다. 존재하지 않을 경우에는 자동으로 생성됩니다. 물결표(~)는 다음 폴더를 나타냅니다.",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "버전을 보관할 경로입니다(공유 폴더 안의 기본값 .stversions 폴더를 사용하려면 비워 두십시오).",
@@ -304,7 +310,9 @@
     "Select latest version": "가장 최신 버전 선택",
     "Select oldest version": "가장 오랜 버전 선택",
     "Send & Receive": "송수신",
+    "Send Extended Attributes": "확장 특성 전송",
     "Send Only": "송신 전용",
+    "Send Ownership": "소유권 전송",
     "Set Ignores on Added Folder": "추가된 폴더에 무시 양식을 설정하십시오",
     "Settings": "설정",
     "Share": "공유",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "암호화된 데이터만이 보관되어 동기화됩니다. 모든 공유된 기기의 폴더가 동일한 비밀번호를 설정하거나 동일한 \"{{receiveEncrypted}}\" 유형이어야 합니다.",
     "Support": "지원",
     "Support Bundle": "지원 묶음",
+    "Sync Extended Attributes": "확장 특성 동기화",
+    "Sync Ownership": "소유권 동기화",
     "Sync Protocol Listen Addresses": "동기화 규약 대기 주소",
     "Sync Status": "동기화 현황",
     "Syncing": "동기화",

gui/default/assets/lang/lang-lt.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Leisti kirsti NAT",
     "Enable Relaying": "Įjungti retransliavimą",
     "Enabled": "Įjungta",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Įveskite neneigiamąjį skaičių (pvz., \"2.35\") ir pasirinkite įtaisą. Procentai yra skaičiuojami kaip viso disko dydžio dalis.",
     "Enter a non-privileged port number (1024 - 65535).": "Įveskite neprivilegijuoto prievado numerį (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Įveskite kableliais atskirtus (\"tcp://ip:prievadas\", \"tcp://serveris:prievadas\") adresus arba \"dynamic\", kad atliktumėte automatinį adresų atlikimą.",
     "Enter ignore patterns, one per line.": "Suveskite nepaisomus šablonus, kiekvieną naujoje eilutėje.",
     "Enter up to three octal digits.": "Įveskite iki trijų aštuntainių skaitmenų.",
     "Error": "Klaida",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Išorinis versijų valdymas",
     "Failed Items": "Nepavykę siuntimai",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Išsiunčiamo srauto maksimalus greitis (KiB/s)",
     "Override": "Nustelbti",
     "Override Changes": "Perrašyti pakeitimus",
+    "Ownership": "Ownership",
     "Path": "Kelias",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Kelias iki aplanko šiame kompiuteryje. Bus sukurtas, jei neegzistuoja. Tildės simbolis (~) gali būti naudojamas kaip trumpinys",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Kelias, kur bus saugomos versijos (palikite tuščią numatytajam .stversions katalogui bendrinamame aplanke).",
@@ -304,7 +310,9 @@
     "Select latest version": "Pasirinkti paskiausią versiją",
     "Select oldest version": "Pasirinkti seniausią versiją",
     "Send & Receive": "Siųsti ir gauti",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Tik siųsti",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Nustatymai",
     "Share": "Bendrinti",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Pagalba",
     "Support Bundle": "Palaikymo paketas",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Sutapatinimo taisyklių adresas",
     "Sync Status": "Sync Status",
     "Syncing": "Sutapatinama",

gui/default/assets/lang/lang-nl.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT traversal inschakelen",
     "Enable Relaying": "Relaying inschakelen",
     "Enabled": "Ingeschakeld",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Voer een positief getal in (bijv. \"2.35\") en selecteer een eenheid. Percentages zijn als deel van de totale schijfgrootte.",
     "Enter a non-privileged port number (1024 - 65535).": "Voer een niet-gereserveerd poortnummer in (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Voer door komma's gescheiden (\"tcp://ip:port\", \"tcp://host:port\") adressen in of \"dynamic\" om automatische detectie van het adres uit te voeren.",
     "Enter ignore patterns, one per line.": "Negeerpatronen invoeren, één per regel.",
     "Enter up to three octal digits.": "Voer tot drie octale cijfers in.",
     "Error": "Fout",
+    "Extended Attributes": "Extended Attributes",
     "External": "Extern",
     "External File Versioning": "Extern versiebeheer",
     "Failed Items": "Mislukte items",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Begrenzing uploadsnelheid (KiB/s)",
     "Override": "Overschrijven",
     "Override Changes": "Wijzigingen overschrijven",
+    "Ownership": "Ownership",
     "Path": "Pad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pad naar de map op de lokale computer. Zal aangemaakt worden als het niet bestaat. De tilde (~) kan gebruikt worden als snelkoppeling voor",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Pad waar versies opgeslagen moeten worden (leeg laten voor de standaard .stversion-map in de gedeelde map).",
@@ -304,7 +310,9 @@
     "Select latest version": "Laatste versie selecteren",
     "Select oldest version": "Oudste versie selecteren",
     "Send & Receive": "Verzenden en ontvangen",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Alleen verzenden",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Negeringen instellen op map \"toegevoegd\"",
     "Settings": "Instellingen",
     "Share": "Delen",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Bewaart en synchroniseert alleen versleutelde gegevens. Mappen op alle verbonden apparaten moeten met hetzelfde wachtwoord ingesteld worden of ook van het type \"{{receiveEncrypted}}\" zijn.",
     "Support": "Ondersteuning",
     "Support Bundle": "Ondersteuningspakket",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Luisteradressen synchronisatieprotocol",
     "Sync Status": "Synchronisatiestatus",
     "Syncing": "Synchroniseren",

gui/default/assets/lang/lang-pl.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Włącz trawersowanie NAT",
     "Enable Relaying": "Włącz przekazywanie",
     "Enabled": "Włączone",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Włącza wysyłanie atrybutów rozszerzonych do innych urządzeń oraz stosowanie nadesłanych atrybutów rozszerzonych. Może wymagać pracy z podniesionymi uprawnieniami.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Włącza wysyłanie atrybutów rozszerzonych do innych urządzeń, ale nie stosuje nadesłanych atrybutów rozszerzonych. To ustawienie może mieć znaczny wpływ na wydajność. Zawsze włączone, gdy włączona jest \"synchronizacja atrybutów rozszerzonych\".",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Włącza wysyłanie informacji o prawach własności do innych urządzeń oraz stosowanie nadesłanych informacji o prawach własności. Zwykle wymaga pracy z podniesionymi uprawnieniami.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Włącza wysyłanie informacji o prawach własności do innych urządzeń, ale nie stosuje nadesłanych informacji o prawach własności. To ustawienie może mieć znaczny wpływ na wydajność. Zawsze włączone, gdy włączona jest \"synchronizacja praw własności\".",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Wprowadź nieujemną wartość liczbową (np. \"2.35\") oraz wybierz jednostkę. Procenty odnoszą się do rozmiaru całego dysku.",
     "Enter a non-privileged port number (1024 - 65535).": "Wprowadź nieuprzywilejowany numer portu (1024-65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Wprowadź oddzielone przecinkiem adresy (\"tcp://ip:port\", \"tcp://host:port\") lub \"dynamic\" w celu automatycznego odnajdywania adresu.",
     "Enter ignore patterns, one per line.": "Wprowadź wzorce ignorowania, po jednym w każdej linii.",
     "Enter up to three octal digits.": "Wprowadź maksymalnie trzy cyfry ósemkowe.",
     "Error": "Błąd",
+    "Extended Attributes": "Atrybuty rozszerzone",
     "External": "Zewnętrzne",
     "External File Versioning": "Zewnętrzne wersjonowanie plików",
     "Failed Items": "Elementy zakończone niepowodzeniem",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ograniczenie prędkości wysyłania (KiB/s)",
     "Override": "Nadpisz",
     "Override Changes": "Nadpisz zmiany",
+    "Ownership": "Prawa własności",
     "Path": "Ścieżka",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ścieżka do folderu na komputerze lokalnym. Zostanie utworzona, jeżeli jeszcze nie istnieje. Znak tyldy (~) może zostać użyty jako skrót do",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Ścieżka przechowywania wersji (pozostaw pustą dla domyślnego katalogu .stversions we współdzielonym folderze).",
@@ -304,7 +310,9 @@
     "Select latest version": "Wybierz najnowszą wersję",
     "Select oldest version": "Wybierz najstarszą wersję",
     "Send & Receive": "Wyślij i odbierz",
+    "Send Extended Attributes": "Wysyłanie atrybutów rozszerzonych",
     "Send Only": "Tylko wyślij",
+    "Send Ownership": "Wysyłanie praw własności",
     "Set Ignores on Added Folder": "Ustaw wzorce ignorowania dla dodanego folderu",
     "Settings": "Ustawienia",
     "Share": "Współdziel",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Przechowuje i synchronizuje tylko zaszyfrowane dane. Foldery na wszystkich połączonych urządzeniach muszą używać tego samego hasła bądź też być rodzaju \"{{receiveEncrypted}}\".",
     "Support": "Wsparcie",
     "Support Bundle": "Pakiet wsparcia",
+    "Sync Extended Attributes": "Synchronizacja atrybutów rozszerzonych",
+    "Sync Ownership": "Synchronizacja praw własności",
     "Sync Protocol Listen Addresses": "Adres nasłuchu protokołu synchronizacji",
     "Sync Status": "Stan synchronizacji",
     "Syncing": "Synchronizowanie",

gui/default/assets/lang/lang-pt-BR.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Habilitar NAT",
     "Enable Relaying": "Habilitar retransmissão",
     "Enabled": "Habilitado",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Insira um número não negativo (por exemplo, 2.35) e escolha uma unidade. Porcentagens são como parte do tamanho total do disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Insira um número de porta não privilegiada (1024-65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Digite os endereços separados por vírgula (\"tcp://ip:porta\", \"tcp://host:porta\") ou \"dinâmico\" para realizar a descoberta automática do endereço.",
     "Enter ignore patterns, one per line.": "Insira os filtros, um por linha.",
     "Enter up to three octal digits.": "Insira até três dígitos octais.",
     "Error": "Erro",
+    "Extended Attributes": "Extended Attributes",
     "External": "Externo",
     "External File Versioning": "Externo",
     "Failed Items": "Itens com falha",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite de velocidade de envio (KiB/s)",
     "Override": "Substituir",
     "Override Changes": "Sobrescrever alterações",
+    "Ownership": "Ownership",
     "Path": "Caminho",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta na máquina local. Será criado caso não exista. O caractere til (~) pode ser usado como um atalho para",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Caminho do diretório onde as versões são salvas (deixe em branco para que seja o diretório padrão .stversions dentro da pasta compartilhada). ",
@@ -304,7 +310,9 @@
     "Select latest version": "Escolher a última versão",
     "Select oldest version": "Escolher a versão mais antiga",
     "Send & Receive": "Envia e recebe",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Somente envia",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Definir padrões de exclusão na pasta adicionada",
     "Settings": "Configurações",
     "Share": "Compartilhar",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Armazena e sincroniza apenas dados criptografados. As pastas em todos os dispositivos conectados precisam ser configuradas com a mesma senha ou ser do tipo \"{{receiveEncrypted}}\" também.",
     "Support": "Suporte",
     "Support Bundle": "Pacote de Suporte",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Endereços de escuta do protocolo de sincronização",
     "Sync Status": "Status da sincronia",
     "Syncing": "Sincronizando",

gui/default/assets/lang/lang-pt-PT.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Activar travessia de NAT",
     "Enable Relaying": "Permitir retransmissão",
     "Enabled": "Activada",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Habilita o envio de atributos estendidos para os outros dispositivos e aplicar os atributos estendidos recebidos. Pode exigir que se corra com privilégios elevados.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Habilita o envio de atributos estendidos para outros dispositivos, mas não aplica os atributos estendidos recebidos. Isto pode ter um impacto de desempenho significativo. É sempre habilitado quando o \"Sincronizar atributos estendidos\" é habilitado.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Habilita o envio de informação sobre propriedade para os outros dispositivos e a aplicação da informação recebida sobre propriedade. Requer, tipicamente, que se execute com privilégios elevados.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Habilita o envio de informação sobre propriedade para os outros dispositivos, mas sem aplicar a informação recebida sobre propriedade. Pode ter um impacto significativo em termos de desempenho. É sempre habilitado quando o \"Sincronizar propriedade\" é habilitado.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Escreva um número positivo (ex.: \"2.35\") e seleccione uma unidade. Percentagens são relativas ao tamanho total do disco.",
     "Enter a non-privileged port number (1024 - 65535).": "Escreva um número de porto não-privilegiado (1024-65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduza endereços separados por vírgulas (\"tcp://ip:porto\", \"tcp://máquina:porto\") ou \"dynamic\" para descobrir automaticamente os endereços.",
     "Enter ignore patterns, one per line.": "Escreva os padrões de exclusão, um por linha.",
     "Enter up to three octal digits.": "Insira de um a três dígitos em octal.",
     "Error": "Erro",
+    "Extended Attributes": "Atributos estendidos",
     "External": "Externa",
     "External File Versioning": "Externa",
     "Failed Items": "Itens que falharam",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limite da velocidade de envio (KiB/s)",
     "Override": "Sobrepor",
     "Override Changes": "Sobrepor alterações",
+    "Ownership": "Propriedade",
     "Path": "Caminho",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta no computador local. Será criada, caso não exista. O til (~) pode ser utilizado como atalho para",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Caminho da pasta onde as versões deverão ser guardadas (deixe vazio para ficar a pasta predefinida .stversions dentro da pasta partilhada).",
@@ -304,7 +310,9 @@
     "Select latest version": "Seleccionar a última versão",
     "Select oldest version": "Seleccionar a versão mais antiga",
     "Send & Receive": "envia e recebe",
+    "Send Extended Attributes": "Enviar atributos estendidos",
     "Send Only": "envia apenas",
+    "Send Ownership": "Enviar propriedade",
     "Set Ignores on Added Folder": "Definir padrões de exclusão na pasta adicionada",
     "Settings": "Configurações",
     "Share": "Partilhar",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Armazena e sincroniza apenas dados encriptados. As pastas em todos os dispositivos conectados têm de ser configuradas com a mesma senha ou ser também do tipo \"{{receiveEncrypted}}\".",
     "Support": "Suporte",
     "Support Bundle": "Pacote de suporte",
+    "Sync Extended Attributes": "Sincronizar atributos estendidos",
+    "Sync Ownership": "Sincronizar propriedade",
     "Sync Protocol Listen Addresses": "Endereços de escuta do protocolo de sincronização",
     "Sync Status": "Estado da sincronização",
     "Syncing": "A Sincronizar",

gui/default/assets/lang/lang-ro-RO.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Enable NAT traversal",
     "Enable Relaying": "Enable Relaying",
     "Enabled": "Enabled",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Adaugă șabloanele de ignorare, câte una pe linie.",
     "Enter up to three octal digits.": "Enter up to three octal digits.",
     "Error": "Eroare",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Administrare externă a versiunilor documentului",
     "Failed Items": "Failed Items",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Limită Viteză de Upload (KB/s)",
     "Override": "Override",
     "Override Changes": "Suprascrie Schimbări",
+    "Ownership": "Ownership",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Localizarea fișierului în acest computer. Dacă nu există, va fi creat. Tilda (~) înlocuiește ",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
@@ -304,7 +310,9 @@
     "Select latest version": "Select latest version",
     "Select oldest version": "Select oldest version",
     "Send & Receive": "Send & Receive",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Send Only",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Setări",
     "Share": "Împarte",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Suport Tehnic",
     "Support Bundle": "Support Bundle",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Adresa protocolului de sincronizare",
     "Sync Status": "Sync Status",
     "Syncing": "Se sincronizează",

gui/default/assets/lang/lang-ru.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Включить NAT traversal",
     "Enable Relaying": "Включить релеи",
     "Enabled": "Включено",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Введите положительное значение (например, \"2.35\") и выберите единицу измерения, либо процент от общей ёмкости диска.",
     "Enter a non-privileged port number (1024 - 65535).": "Введите непривилегированный порт (1024—65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введите через запятую («tcp://ip:port», «tcp://host:port») адреса, либо «dynamic», чтобы выполнить автоматическое обнаружение адреса.",
     "Enter ignore patterns, one per line.": "Введите шаблоны игнорирования, по одному на строку.",
     "Enter up to three octal digits.": "Введите до трех восьмеричных цифр.",
     "Error": "Ошибка",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Внешний контроль версий файлов",
     "Failed Items": "Сбои",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ограничение исходящей скорости (КиБ/с)",
     "Override": "Перезаписать",
     "Override Changes": "Перезаписать изменения",
+    "Ownership": "Ownership",
     "Path": "Путь",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Путь к папке на локальном компьютере. Если её не существует, то она будет создана. Тильда (~) может использоваться как сокращение для",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Путь, в котором нужно хранить версии (оставьте пустым для папки по умолчанию .stversions внутри общей папки).",
@@ -304,7 +310,9 @@
     "Select latest version": "Выбрать последнюю версию",
     "Select oldest version": "Выбрать самую старую версию",
     "Send & Receive": "Отправить и получить",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Только отправить",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Настройки",
     "Share": "Предоставить доступ",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Хранит и синхронизирует только зашифрованные данные. Папки на всех подключенных устройствах должны быть настроены под один и тот же пароль или иметь тип \"{{receiveEncrypted}}\".",
     "Support": "Поддержка",
     "Support Bundle": "Данные для поддержки",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Адрес протокола синхронизации",
     "Sync Status": "Sync Status",
     "Syncing": "Синхронизация",

gui/default/assets/lang/lang-si.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT සංක්‍රමණය සබල කරන්න",
     "Enable Relaying": "Relaying සබල කරන්න",
     "Enabled": "සබලයි",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "සෘණ නොවන අංකයක් ඇතුළත් කරන්න (උදා, \"2.35\") සහ ඒකකයක් තෝරන්න. ප්‍රතිශත මුළු තැටි ප්‍රමාණයේ කොටසක් ලෙස වේ.",
     "Enter a non-privileged port number (1024 - 65535).": "වරප්‍රසාද නොලබන වරාය අංකයක් ඇතුළත් කරන්න (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "ලිපිනය ස්වයංක්‍රීයව සොයා ගැනීම සඳහා කොමාවෙන් වෙන් කළ (\"tcp://ip:port\", \"tcp://host:port\") ලිපින හෝ \"ගතික\" ඇතුළත් කරන්න.",
     "Enter ignore patterns, one per line.": "එක් පේළියකට එකක් නොසලකා හැරීමේ රටා ඇතුළු කරන්න.",
     "Enter up to three octal digits.": "අෂ්ටක ඉලක්කම් තුනක් දක්වා ඇතුළු කරන්න.",
     "Error": "දෝෂය",
+    "Extended Attributes": "Extended Attributes",
     "External": "බාහිර",
     "External File Versioning": "බාහිර ගොනු අනුවාදය",
     "Failed Items": "අසාර්ථක අයිතම",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "පිටතට යන ගාස්තු සීමාව (KiB/s)",
     "Override": "අභිබවා යන්න",
     "Override Changes": "වෙනස්කම් අභිබවා යන්න",
+    "Ownership": "Ownership",
     "Path": "මාර්ගය",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "දේශීය පරිගණකයේ ෆෝල්ඩරය වෙත මාර්ගය. එය නොමැති නම් නිර්මාණය වනු ඇත. tilde අක්ෂරය (~) සඳහා කෙටි මගක් ලෙස භාවිතා කළ හැක",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "අනුවාද ගබඩා කළ යුතු මාර්ගය (බෙදාගත් ෆෝල්ඩරයේ පෙරනිමි .stversions නාමාවලිය සඳහා හිස්ව තබන්න).",
@@ -304,7 +310,9 @@
     "Select latest version": "නවතම අනුවාදය තෝරන්න",
     "Select oldest version": "පැරණිතම අනුවාදය තෝරන්න",
     "Send & Receive": "යැවීම සහ ලැබීම",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "යවන්න පමණයි",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "එකතු කළ ෆෝල්ඩරයේ නොසලකා හැරීම් සකසන්න",
     "Settings": "සැකසුම්",
     "Share": "බෙදාගන්න",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "සංකේතනය කළ දත්ත පමණක් ගබඩා කර සමමුහුර්ත කරයි. සියලුම සම්බන්ධිත උපාංගවල ඇති ෆෝල්ඩර එකම මුරපදයකින් හෝ \"{{receiveEncrypted}}\" වර්ගයට අයත් විය යුතුය.",
     "Support": "සහාය",
     "Support Bundle": "ආධාරක බණ්ඩලය",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "ප්‍රොටෝකෝලය සවන්දීමේ ලිපින සමමුහුර්ත කරන්න",
     "Sync Status": "Sync Status",
     "Syncing": "සමමුහුර්ත කිරීම",

gui/default/assets/lang/lang-sl.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Omogoči NAT prehod",
     "Enable Relaying": "Omogoči posredovanje",
     "Enabled": "Omogočeno",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Vnesite število, katera ni negativno (npr. \"2,35\") in izberite enoto. Odstotki so del celotne velikosti diska.",
     "Enter a non-privileged port number (1024 - 65535).": "Vnesite neprivilegirano številko omrežnih vrat (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Vnesi z vejico ločene naslove (\"tcp://ip:port\", \"tcp://host:port\") ali \"dynamic\" za samodejno odkrivanje naslova.",
     "Enter ignore patterns, one per line.": "Vnesite spregledni vzorec, enega v vrsto",
     "Enter up to three octal digits.": "Vnesite do tri osmiške števke.",
     "Error": "Napaka",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Zunanje beleženje različic datotek",
     "Failed Items": "Neuspeli predmeti",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Omejitev prenašanja (KiB/s)",
     "Override": "Preglasi",
     "Override Changes": "Prepiši spremembe",
+    "Ownership": "Ownership",
     "Path": "Pot",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pot do mape v lokalnem računalniku. Ustvarjeno bo, če ne obstaja. Znak tilde (~) lahko uporabite kot bližnjico za",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Pot, kjer naj bodo shranjene različice (pustite prazno za privzeto mapo .stversions v mapi skupne rabe).",
@@ -304,7 +310,9 @@
     "Select latest version": "Izberite najnovejšo različico",
     "Select oldest version": "Izberite najstarejšo različico",
     "Send & Receive": "Pošlji in Prejmi",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Samo pošiljanje",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Nastavitve",
     "Share": "Deli",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Shranjuje in sinhronizira samo šifrirane podatke. Mape na vseh povezanih napravah morajo biti nastavljene z istim geslom ali pa morajo biti tudi vrste \"{{receiveEncrypted}}\".",
     "Support": "Pomoč",
     "Support Bundle": "Podporni paket",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Naslovi poslušanja protokola sinhronizacije",
     "Sync Status": "Sync Status",
     "Syncing": "Usklajevanje",

gui/default/assets/lang/lang-sv.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Aktivera NAT-genompassering",
     "Enable Relaying": "Aktivera vidarebefordring",
     "Enabled": "Aktiverad",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Möjliggör sändning av utökade attribut till andra enheter, och tillämpning av inkommande utökade attribut. Kan kräva körning med förhöjda behörigheter.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Möjliggör sändning av utökade attribut till andra enheter, men inte att tillämpa inkommande utökade attribut. Detta kan ha en betydande inverkan på prestanda. Alltid aktiverad när \"Synkronisera utökade attribut\" är aktiverat.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Möjliggör att skicka ägarinformation till andra enheter och tillämpa inkommande ägarinformation. Kräver vanligtvis körning med förhöjda behörigheter.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Möjliggör att skicka ägarskap till andra enheter, men inte tillämpa inkommande ägarinformation. Detta kan ha en betydande inverkan på prestanda. Alltid aktiverat när \"Synkronisera ägande\" är aktiverat.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Ange ett icke-negativt antal (t.ex., \"2.35\") och välj en enhet. Procenttalen är som en del av den totala diskstorleken.",
     "Enter a non-privileged port number (1024 - 65535).": "Ange ett icke-privilegierat portnummer (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Ange kommaseparerade (\"tcp://ip:port\", \"tcp://host:port\") adresser eller \"dynamic\" för att utföra automatisk upptäckt av adressen.",
     "Enter ignore patterns, one per line.": "Ange ignoreringsmönster, en per rad.",
     "Enter up to three octal digits.": "Ange upp till tre oktala siffror.",
     "Error": "Fel",
+    "Extended Attributes": "Utökade attribut",
     "External": "Extern",
     "External File Versioning": "Extern filversionshantering",
     "Failed Items": "Misslyckade objekt",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Utgående hastighetsgräns (KiB/s)",
     "Override": "Åsidosätt",
     "Override Changes": "Åsidosätt förändringar",
+    "Ownership": "Ägarskap",
     "Path": "Sökväg",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sökväg till mappen på din dator. Kommer att skapas om det inte finns. Tecknet tilde (~) kan användas som en genväg för",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Sökväg där versioner ska lagras (lämna tomt för standardmappen .stversions i den delade mappen).",
@@ -304,7 +310,9 @@
     "Select latest version": "Välj senaste versionen",
     "Select oldest version": "Välj äldsta versionen",
     "Send & Receive": "Skicka & ta emot",
+    "Send Extended Attributes": "Skicka utökade attribut",
     "Send Only": "Skicka endast",
+    "Send Ownership": "Skicka ägarskap",
     "Set Ignores on Added Folder": "Ställ in ignoreringar för tillagd mapp",
     "Settings": "Inställningar",
     "Share": "Dela",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Lagrar och synkroniserar endast krypterade data. Mappar på alla anslutna enheter måste ställas in med samma lösenord eller vara av typen \"{{receiveEncrypted}}\".",
     "Support": "Support",
     "Support Bundle": "Support Bundle",
+    "Sync Extended Attributes": "Synkronisera utökade attribut",
+    "Sync Ownership": "Synkronisera ägarskap",
     "Sync Protocol Listen Addresses": "Lyssnaradresser för synkroniseringsprotokoll",
     "Sync Status": "Synkroniseringsstatus",
     "Syncing": "Synkroniserar",
@@ -424,7 +434,7 @@
     "Upgrade To {%version%}": "Uppgradera till {{version}}",
     "Upgrading": "Uppgraderar",
     "Upload Rate": "Sändningshastighet",
-    "Uptime": "Drifttid",
+    "Uptime": "Driftstid",
     "Usage reporting is always enabled for candidate releases.": "Användningsrapportering är alltid aktiverad för kandidatutgåvor.",
     "Use HTTPS for GUI": "Använd HTTPS för gränssnitt",
     "Use notifications from the filesystem to detect changed items.": "Använd aviseringar från filsystemet för att upptäcka ändrade objekt.",

gui/default/assets/lang/lang-tr.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "NAT geçişini etkinleştir",
     "Enable Relaying": "Aktarmayı etkinleştir",
     "Enabled": "Etkinleştirildi",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Genişletilmiş özniteliklerin diğer cihazlara gönderilmesini ve gelen genişletilmiş özniteliklerin uygulanmasını etkinleştirir. Yükseltilmiş izinlerle çalıştırmayı gerektirebilir.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Genişletilmiş özniteliklerin diğer cihazlara gönderilmesini etkinleştirir, ancak gelen genişletilmiş öznitelikleri uygulamaz. Bunun önemli bir performans etkisi olabilir. \"Genişletilmiş Öznitelikleri Eşitle\" etkinleştirildiğinde her zaman etkinleştirilir.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Sahiplik bilgilerinin diğer cihazlara gönderilmesini ve gelen sahiplik bilgilerinin uygulanmasını etkinleştirir. Genellikle yükseltilmiş izinlerle çalıştırmayı gerektirir.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Sahipliğin diğer cihazlara gönderilmesini etkinleştirir, ancak gelen sahiplik bilgilerini uygulamaz. Bunun önemli bir performans etkisi olabilir. \"Sahipliği Eşitle\" etkinleştirildiğinde her zaman etkinleştirilir.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatif olmayan bir sayı girin (örn., \"2.35\") ve bir birim seçin. Yüzdeler, toplam disk boyutunun bir parçasıdır.",
     "Enter a non-privileged port number (1024 - 65535).": "Yetkisiz bir bağlantı noktası numarası girin (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Virgülle ayrılmış (\"tcp://ip:b.noktası\", \"tcp://anamakine:b.noktası\") adresler veya otomatik adres keşfi yapmak için \"dynamic\" girin.",
     "Enter ignore patterns, one per line.": "Yoksayma şekillerini girin, her satıra bir tane.",
     "Enter up to three octal digits.": "En fazla üç sekizlik rakam girin.",
     "Error": "Hata",
+    "Extended Attributes": "Genişletilmiş Öznitelikler",
     "External": "Harici",
     "External File Versioning": "Harici Dosya Sürümlendirme",
     "Failed Items": "Başarısız Olan Öğeler",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Giden Hız Sınırı (KiB/s)",
     "Override": "Geçersiz kıl",
     "Override Changes": "Değişiklikleri geçersiz kıl",
+    "Ownership": "Sahiplik",
     "Path": "Yol",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Yerel bilgisayardaki klasör yolu. Klasör yoksa oluşturulacaktır. Tilde karakterinin (~) kısayol olarak kullanılabileceği yol",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Sürümlerin depolanması gereken yol (paylaşılan klasördeki varsayılan .stversions dizini için boş bırakın).",
@@ -304,7 +310,9 @@
     "Select latest version": "En son sürümü seç",
     "Select oldest version": "En eski sürümü seç",
     "Send & Receive": "Gönder ve Al",
+    "Send Extended Attributes": "Genişletilmiş Öznitelikleri Gönder",
     "Send Only": "Yalnızca Gönder",
+    "Send Ownership": "Sahipliği Gönder",
     "Set Ignores on Added Folder": "Eklenen Klasörde Yoksayılanları Ayarla",
     "Settings": "Ayarlar",
     "Share": "Paylaş",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Yalnızca şifrelenmiş verileri depolar ve eşitler. Tüm bağlı cihazlardaki klasörlerin de aynı parola ile ayarlanması veya \"{{receiveEncrypted}}\" türünde olması gerekir.",
     "Support": "Destek",
     "Support Bundle": "Destek Paketi",
+    "Sync Extended Attributes": "Genişletilmiş Öznitelikleri Eşitle",
+    "Sync Ownership": "Sahipliği Eşitle",
     "Sync Protocol Listen Addresses": "Eşitleme Protokolü Dinleme Adresleri",
     "Sync Status": "Eşitleme Durumu",
     "Syncing": "Eşitleniyor",

gui/default/assets/lang/lang-uk.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "Увімкнути NAT traversal",
     "Enable Relaying": "Увімкнути ретрансляцію (relaying)",
     "Enabled": "Увімкнено",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Введіть невід'ємне число (напр. \"2.35\") та виберіть пристрій. Проценти від загального дискового простору.",
     "Enter a non-privileged port number (1024 - 65535).": "Введіть номер непривілейованого порту (1024 - 65535).",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введіть розділені комою (\"tcp://ip:port\", \"tcp://host:port\") адреси або \"dynamic\" для автоматичного визначення адреси.",
     "Enter ignore patterns, one per line.": "Введіть шаблони ігнорування, по одному на рядок.",
     "Enter up to three octal digits.": "Введіть до трьох вісімкових цифр.",
     "Error": "Помилка",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "Зовнішне керування версіями",
     "Failed Items": "Невдалі",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "Ліміт швидкості віддачі (КіБ/с)",
     "Override": "Override",
     "Override Changes": "Розіслати мою версію",
+    "Ownership": "Ownership",
     "Path": "Шлях",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Шлях до директорії на локальному комп’ютері. Буде створений, якщо такий не існує. Символ тильди (~) може бути використаний як ярлик для",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Шлях, де повинні зберігатися версії (залиште порожнім для зберігання в .stversions в середині директорії)",
@@ -304,7 +310,9 @@
     "Select latest version": "Обрати найновішу версію",
     "Select oldest version": "Обрати найстарішу версію",
     "Send & Receive": "Відправити та отримати",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "Лише відправити",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "Налаштування",
     "Share": "Розповсюдити ",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
     "Support": "Підтримка",
     "Support Bundle": "Пакетна підтримка",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "Адреса і вхідний порт протоколу синхронізації",
     "Sync Status": "Sync Status",
     "Syncing": "Синхронізація",

gui/default/assets/lang/lang-zh-CN.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "启用 NAT 穿透",
     "Enable Relaying": "启用中继",
     "Enabled": "已启用",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "输入一个非负数（例如“2.35”）并选择单位。%表示占磁盘总容量的百分比。",
     "Enter a non-privileged port number (1024 - 65535).": "输入一个非特权的端口号 (1024 - 65535)。",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "输入以半角逗号分隔的（\"tcp://ip:port\", \"tcp://host:port\"）设备地址列表，或者输入“dynamic”以自动发现设备地址。",
     "Enter ignore patterns, one per line.": "请输入忽略模式，每行一条。",
     "Enter up to three octal digits.": "最多输入三个8进制数字",
     "Error": "错误",
+    "Extended Attributes": "Extended Attributes",
     "External": "外部",
     "External File Versioning": "外部版本控制",
     "Failed Items": "失败的项目",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "上传速度限制 (KiB/s)",
     "Override": "覆盖",
     "Override Changes": "撤销改变",
+    "Ownership": "Ownership",
     "Path": "路径",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "文件夹在本地的路径。如果不存在，则会被创建。波浪线符号（~）是如下路径的缩略符：",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "历史版本储存路径（留空则会默认存储在共享文件夹中的 .stversions 目录）。",
@@ -304,7 +310,9 @@
     "Select latest version": "选择最新的版本",
     "Select oldest version": "选择最旧的版本",
     "Send & Receive": "发送与接收",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "仅发送",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "在增加的文件夹中设置忽略项",
     "Settings": "设置",
     "Share": "共享",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "仅存储和同步加密的数据。所有连接的设备上的文件夹也需要使用相同的密码设置，或者也必须设置为“ {{receiveEncrypted}}”类型。",
     "Support": "支持",
     "Support Bundle": "支持捆绑包",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "协议监听地址",
     "Sync Status": "同步状态",
     "Syncing": "同步中",

gui/default/assets/lang/lang-zh-HK.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "啟用 NAT 遍歷",
     "Enable Relaying": "開啟中繼",
     "Enabled": "已啟用",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "輸入一個非負數（例如「2.35」）並選擇單位。%表示占磁盤總容量的百分比。",
     "Enter a non-privileged port number (1024 - 65535).": "輸入一個非特權的端口號 (1024 - 65535)。",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半角逗號分隔的（\"tcp://ip:port\", \"tcp://host:port\"）設備地址列表，或者輸入「dynamic」以自動發現設備地址。",
     "Enter ignore patterns, one per line.": "請輸入忽略模式，每行一條。",
     "Enter up to three octal digits.": "最多輸入三個8進制數字",
     "Error": "錯誤",
+    "Extended Attributes": "Extended Attributes",
     "External": "外部",
     "External File Versioning": "外部版本控制",
     "Failed Items": "失敗的項目",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "上傳速度限制 (KiB/s)",
     "Override": "Override",
     "Override Changes": "覆蓋更改",
+    "Ownership": "Ownership",
     "Path": "路徑",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "文件夾在本地的路徑。如果不存在，則會被建立。波浪線符號（~）是如下路徑的縮略符：",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "歷史版本儲存路徑（留空則會默認存儲在共享文件夾中的 .stversions 目錄）。",
@@ -304,7 +310,9 @@
     "Select latest version": "選擇最新的版本",
     "Select oldest version": "選擇最舊的版本",
     "Send & Receive": "發送與接收",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "僅發送",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "在新增的文件夾上設置忽略",
     "Settings": "設置",
     "Share": "共享",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "僅存儲和同步加密數據。所有連接設備上的文件夾都需要設置相同的密碼或類型為 \"{%receiveEncrypted%}\"。",
     "Support": "支持",
     "Support Bundle": "支持捆綁包",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "協議監聽地址",
     "Sync Status": "Sync Status",
     "Syncing": "同步中",

gui/default/assets/lang/lang-zh-TW.json

@@ -124,12 +124,17 @@
     "Enable NAT traversal": "啟用 NAT 穿透",
     "Enable Relaying": "啟用中繼",
     "Enabled": "啟用",
+    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
+    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
+    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
+    "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "請輸入一非負數（如：\"2.35\"）並選擇一個單位。百分比表示佔用磁碟容量的大小。",
     "Enter a non-privileged port number (1024 - 65535).": "輸入一個非特權通訊埠號 (1024 - 65535)。",
     "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號分隔的 (\"tcp://ip:port\", \"tcp://host:port\") 位址列表，或者填入 \"dynamic\" 以啟用自動探索位址。",
     "Enter ignore patterns, one per line.": "輸入忽略樣式，每行一種。",
     "Enter up to three octal digits.": "輸入最多三位八進位數字。",
     "Error": "錯誤",
+    "Extended Attributes": "Extended Attributes",
     "External": "External",
     "External File Versioning": "外部的檔案版本控制",
     "Failed Items": "失敗的項目",
@@ -244,6 +249,7 @@
     "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
     "Override": "Override",
     "Override Changes": "覆蓋變動",
+    "Ownership": "Ownership",
     "Path": "路徑",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "資料夾在本機的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑：",
     "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "儲存歷史版本的路徑（共享資料夾中的預設 .stversions 目錄則留白）。",
@@ -304,7 +310,9 @@
     "Select latest version": "選擇最新的版本",
     "Select oldest version": "選擇最舊的版本",
     "Send & Receive": "傳送及接收",
+    "Send Extended Attributes": "Send Extended Attributes",
     "Send Only": "僅傳送",
+    "Send Ownership": "Send Ownership",
     "Set Ignores on Added Folder": "Set Ignores on Added Folder",
     "Settings": "設定",
     "Share": "共享",
@@ -342,6 +350,8 @@
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "僅儲存並同步已加密的資料。所有位於已連接裝置上的資料夾，必須設定相同的密碼，或屬於 \"{{receiveEncrypted}}\" 類型。",
     "Support": "支援",
     "Support Bundle": "支援包",
+    "Sync Extended Attributes": "Sync Extended Attributes",
+    "Sync Ownership": "Sync Ownership",
     "Sync Protocol Listen Addresses": "同步通訊協定監聽位址",
     "Sync Status": "同步狀態",
     "Syncing": "正在同步",

gui/default/syncthing/core/aboutModalView.html

@@ -26,7 +26,7 @@
         <h4 class="text-center" translate>The Syncthing Authors</h4>
         <div class="row">
           <div class="col-md-12" id="contributor-list">
-Jakob Borg, Audrius Butkevicius, Jesse Lucas, Simon Frei, Alexander Graf, Alexandre Viau, Anderson Mesquita, André Colomb, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Evgeny Kuznetsov, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Nate Morrison, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Stefan Tatschner, Tomasz Wilczyński, Wulf Weich, greatroar, Aaron Bieber, Adam Piggott, Adel Qalieh, Alan Pope, Alberto Donato, Alessandro G., Alex Lindeman, Alex Xu, Aman Gupta, Andrew Dunham, Andrew Meyer, Andrew Rabert, Andrey D, Anjan Momi, Antoine Lamielle, Anur, Aranjedeath, Arkadiusz Tymiński, Aroun, Arthur Axel fREW Schmidt, Artur Zubilewicz, Aurélien Rainone, BAHADIR YILMAZ, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benedikt Heine, Benedikt Morbach, Benjamin Nater, Benno Fünfstück, Benny Ng, Boqin Qin, Boris Rybalkin, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chih-Hsuan Yen, Choongkyu, Chris Howie, Chris Joel, Chris Tonkinson, Christian Prescott, Colin Kennedy, Cromefire_, Cyprien Devillez, Dale Visser, Dan, Daniel Barczyk, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Devon G. Redekopp, Dmitry Saveliev, Domenic Horner, Dominik Heidler, Elias Jarlebring, Elliot Huffman, Emil Hessman, Eng Zer Jun, Eric Lesiuta, Erik Meitner, Evan Spensley, Federico Castagnini, Felix Ableitner, Felix Lampe, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gahl Saraf, Gilli Sigurdsson, Gleb Sinyavskiy, Graham Miln, Greg, Han Boetes, HansK-p, Harrison Jones, Heiko Zuerker, Hugo Locurcio, Iain Barnett, Ian Johnson, Ikko Ashimine, Ilya Brin, Iskander Sharipov, Jaakko Hannikainen, Jacek Szafarkiewicz, Jack Croft, Jacob, Jake Peterson, James Patterson, Jaroslav Lichtblau, Jaroslav Malec, Jauder Ho, Jaya Chithra, Jeffery To, Jens Diemer, Jerry Jacobs, Jochen Voss, Johan Andersson, Johan Vromans, John Rinehart, Jonas Thelemann, Jonathan, Jonathan Cross, Jonta, Jose Manuel Delicado, Jörg Thalheim, Jędrzej Kula, Kalle Laine, Karol Różycki, Kebin Liu, Keith Turner, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin Bushiri, Kevin White, Jr., Kurt Fitzner, LSmithx2, Lars Lehtonen, Laurent Arnoud, Laurent Etiemble, Leo Arias, Liu Siyuan, Lord Landon Agahnim, Lukas Lihotzki, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Marcus Legendre, Mario Majila, Mark Pulford, Martchus, Mateusz Naściszewski, Mateusz Ż, Matic Potočnik, Matt Burke, Matt Robenolt, Matteo Ruina, Maurizio Tomasi, Max, Max Schulze, MaximAL, Maxime Thirouin, MichaIng, Michael Jephcote, Michael Rienstra, Michael Tilli, Mike Boone, MikeLund, MikolajTwarog, Mingxuan Lin, Naveen, Nicholas Rishel, Nico Stapelbroek, Nicolas Braud-Santoni, Nicolas Perraut, Niels Peter Roest, Nils Jakobi, NinoM4ster, Nitroretro, NoLooseEnds, Oliver Freyermuth, Otiel, Oyebanji Jacob Mayowa, Pablo, Pascal Jungblut, Paul Brit, Pawel Palenica, Paweł Rozlach, Peter Badida, Peter Dave Hello, Peter Hoeg, Peter Marquardt, Phani Rithvij, Phil Davis, Phill Luby, Pier Paolo Ramon, Piotr Bejda, Pramodh KP, Quentin Hibon, Rahmi Pruitt, Richard Hartmann, Robert Carosi, Roberto Santalla, Robin Schoonover, Roman Zaynetdinov, Ross Smith II, Ruslan Yevdokymov, Ryan Qian, Sacheendra Talluri, Scott Klupfel, Shaarad Dalvi, Simon Mwepu, Sly_tom_cat, Stefan Kuntz, Steven Eckhoff, Suhas Gundimeda, Taylor Khan, Thomas Hipp, Tim Abell, Tim Howes, Tobias Klauser, Tobias Nygren, Tobias Tom, Tom Jakubowski, Tommy Thorn, Tully Robinson, Tyler Brazier, Tyler Kropp, Unrud, Veeti Paananen, Victor Buinsky, Vil Brekin, Vladimir Rusinov, William A. Kennington III, Xavier O., Yannic A., andresvia, andyleap, boomsquared, bt90, chenrui, chucic, cui fliter, derekriemer, desbma, georgespatton, ghjklw, ignacy123, janost, jaseg, jelle van der Waa, jtagcat, klemens, luzpaz, marco-m, mclang, mv1005, otbutz, overkill, perewa, red_led, rubenbe, sec65, villekalliomaki, wangguoliang, wouter bolsterlee, xarx00, xjtdy888, 佛跳墙, 落心
+Jakob Borg, Audrius Butkevicius, Jesse Lucas, Simon Frei, Alexander Graf, Alexandre Viau, Anderson Mesquita, André Colomb, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Evgeny Kuznetsov, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Nate Morrison, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Stefan Tatschner, Tomasz Wilczyński, Wulf Weich, greatroar, Aaron Bieber, Adam Piggott, Adel Qalieh, Alan Pope, Alberto Donato, Alessandro G., Alex Lindeman, Alex Xu, Aman Gupta, Andrew Dunham, Andrew Meyer, Andrew Rabert, Andrey D, Anjan Momi, Antoine Lamielle, Anur, Aranjedeath, Arkadiusz Tymiński, Aroun, Arthur Axel fREW Schmidt, Artur Zubilewicz, Aurélien Rainone, BAHADIR YILMAZ, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benedikt Heine, Benedikt Morbach, Benjamin Nater, Benno Fünfstück, Benny Ng, Boqin Qin, Boris Rybalkin, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chih-Hsuan Yen, Choongkyu, Chris Howie, Chris Joel, Chris Tonkinson, Christian Prescott, Colin Kennedy, Cromefire_, Cyprien Devillez, Dale Visser, Dan, Daniel Barczyk, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Devon G. Redekopp, Dmitry Saveliev, Domenic Horner, Dominik Heidler, Elias Jarlebring, Elliot Huffman, Emil Hessman, Eng Zer Jun, Eric Lesiuta, Eric P, Erik Meitner, Evan Spensley, Federico Castagnini, Felix Ableitner, Felix Lampe, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gahl Saraf, Gilli Sigurdsson, Gleb Sinyavskiy, Graham Miln, Greg, Han Boetes, HansK-p, Harrison Jones, Heiko Zuerker, Hugo Locurcio, Iain Barnett, Ian Johnson, Ikko Ashimine, Ilya Brin, Iskander Sharipov, Jaakko Hannikainen, Jacek Szafarkiewicz, Jack Croft, Jacob, Jake Peterson, James Patterson, Jaroslav Lichtblau, Jaroslav Malec, Jauder Ho, Jaya Chithra, Jeffery To, Jens Diemer, Jerry Jacobs, Jochen Voss, Johan Andersson, Johan Vromans, John Rinehart, Jonas Thelemann, Jonathan, Jonathan Cross, Jonta, Jose Manuel Delicado, Jörg Thalheim, Jędrzej Kula, Kalle Laine, Karol Różycki, Kebin Liu, Keith Turner, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin Bushiri, Kevin White, Jr., Kurt Fitzner, LSmithx2, Lars Lehtonen, Laurent Arnoud, Laurent Etiemble, Leo Arias, Liu Siyuan, Lord Landon Agahnim, Lukas Lihotzki, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Marcus Legendre, Mario Majila, Mark Pulford, Martchus, Mateusz Naściszewski, Mateusz Ż, Matic Potočnik, Matt Burke, Matt Robenolt, Matteo Ruina, Maurizio Tomasi, Max, Max Schulze, MaximAL, Maxime Thirouin, MichaIng, Michael Jephcote, Michael Rienstra, Michael Tilli, Mike Boone, MikeLund, MikolajTwarog, Mingxuan Lin, Naveen, Nicholas Rishel, Nico Stapelbroek, Nicolas Braud-Santoni, Nicolas Perraut, Niels Peter Roest, Nils Jakobi, NinoM4ster, Nitroretro, NoLooseEnds, Oliver Freyermuth, Otiel, Oyebanji Jacob Mayowa, Pablo, Pascal Jungblut, Paul Brit, Pawel Palenica, Paweł Rozlach, Peter Badida, Peter Dave Hello, Peter Hoeg, Peter Marquardt, Phani Rithvij, Phil Davis, Phill Luby, Pier Paolo Ramon, Piotr Bejda, Pramodh KP, Quentin Hibon, Rahmi Pruitt, Richard Hartmann, Robert Carosi, Roberto Santalla, Robin Schoonover, Roman Zaynetdinov, Ross Smith II, Ruslan Yevdokymov, Ryan Qian, Sacheendra Talluri, Scott Klupfel, Shaarad Dalvi, Simon Mwepu, Sly_tom_cat, Stefan Kuntz, Steven Eckhoff, Suhas Gundimeda, Taylor Khan, Thomas Hipp, Tim Abell, Tim Howes, Tobias Klauser, Tobias Nygren, Tobias Tom, Tom Jakubowski, Tommy Thorn, Tully Robinson, Tyler Brazier, Tyler Kropp, Unrud, Veeti Paananen, Victor Buinsky, Vil Brekin, Vladimir Rusinov, William A. Kennington III, Xavier O., Yannic A., andresvia, andyleap, boomsquared, bt90, chenrui, chucic, cui fliter, derekriemer, desbma, georgespatton, ghjklw, ignacy123, janost, jaseg, jelle van der Waa, jtagcat, klemens, luzpaz, marco-m, mclang, mv1005, otbutz, overkill, perewa, red_led, rubenbe, sec65, villekalliomaki, wangguoliang, wouter bolsterlee, xarx00, xjtdy888, 佛跳墙, 落心
           </div>
         </div>
       </div>

man/stdiscosrv.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STDISCOSRV" "1" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "STDISCOSRV" "1" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 stdiscosrv \- Syncthing Discovery Server
 .SH SYNOPSIS

man/strelaysrv.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STRELAYSRV" "1" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "STRELAYSRV" "1" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 strelaysrv \- Syncthing Relay Server
 .SH SYNOPSIS

man/syncthing-bep.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-BEP" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-BEP" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-bep \- Block Exchange Protocol v1
 .SH INTRODUCTION AND DEFINITIONS

man/syncthing-config.5

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-CONFIG" "5" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .SH SYNOPSIS
@@ -149,7 +149,7 @@ may no longer correspond to the defaults.
         <caseSensitiveFS>false</caseSensitiveFS>
         <junctionsAsDirs>false</junctionsAsDirs>
         <syncOwnership>false</syncOwnership>
-        <scanOwnership>false</scanOwnership>
+        <sendOwnership>false</sendOwnership>
     </folder>
     <device id="S7UKX27\-GI7ZTXS\-GC6RKUA\-7AJGZ44\-C6NAYEB\-HSKTJQK\-KJHU2NO\-CWV7EQW" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
         <address>dynamic</address>
@@ -254,7 +254,7 @@ may no longer correspond to the defaults.
             <caseSensitiveFS>false</caseSensitiveFS>
             <junctionsAsDirs>false</junctionsAsDirs>
             <syncOwnership>false</syncOwnership>
-            <scanOwnership>false</scanOwnership>
+            <sendOwnership>false</sendOwnership>
         </folder>
         <device id="" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
             <address>dynamic</address>
@@ -348,7 +348,7 @@ GUI.
     <caseSensitiveFS>false</caseSensitiveFS>
     <junctionsAsDirs>false</junctionsAsDirs>
     <syncOwnership>false</syncOwnership>
-    <scanOwnership>false</scanOwnership>
+    <sendOwnership>false</sendOwnership>
 </folder>
 .ft P
 .fi
@@ -683,9 +683,9 @@ File and directory ownership is synced when this is set to \fBtrue\fP\&. See
 .UNINDENT
 .INDENT 0.0
 .TP
-.B scanOwnership
+.B sendOwnership
 File and directory ownership information is scanned when this is set to
-\fBtrue\fP\&. See /advanced/folder\-scan\-ownership for more information.
+\fBtrue\fP\&. See /advanced/folder\-send\-ownership for more information.
 .UNINDENT
 .SH DEVICE ELEMENT
 .INDENT 0.0

man/syncthing-device-ids.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-DEVICE-IDS" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .sp

man/syncthing-event-api.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-EVENT-API" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .SH DESCRIPTION

man/syncthing-faq.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-FAQ" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .INDENT 0.0

man/syncthing-globaldisco.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-GLOBALDISCO" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-GLOBALDISCO" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-globaldisco \- Global Discovery Protocol v3
 .SH ANNOUNCEMENTS

man/syncthing-localdisco.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-LOCALDISCO" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-LOCALDISCO" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-localdisco \- Local Discovery Protocol v4
 .SH MODE OF OPERATION

man/syncthing-networking.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-NETWORKING" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .SH ROUTER SETUP

man/syncthing-relay.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-RELAY" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-RELAY" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-relay \- Relay Protocol v1
 .SH WHAT IS A RELAY?

man/syncthing-rest-api.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-REST-API" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .sp

man/syncthing-security.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-SECURITY" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .sp

man/syncthing-stignore.5

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-STIGNORE" "5" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .SH SYNOPSIS

man/syncthing-versioning.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-VERSIONING" "7" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING-VERSIONING" "7" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing-versioning \- Keep automatic backups of deleted files by other nodes
 .sp

man/syncthing.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING" "1" "Sep 06, 2022" "v1.21.0" "Syncthing"
+.TH "SYNCTHING" "1" "Sep 14, 2022" "v1.21.0" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .SH SYNOPSIS