gui, man, authors: Update docs, translations, and contributors

gui/default/assets/lang/lang-fil.json

@@ -189,7 +189,7 @@
     "Generate": "I-generate",
     "Global Discovery": "Global na Pagtuklas",
     "Global Discovery Servers": "Mga Server ng Global na Pagtuklas",
-    "Global State": "State ng Global",
+    "Global State": "Global na Kalagayan",
     "Help": "Tulong",
     "Hint: only deny-rules detected while the default is deny. Consider adding \"permit any\" as last rule.": "Hint: deny-rules lang ang nakita habang ang default ay deny. Isaalang-alang ang pagdaragdag ng \"pahintulutan ang alinman\" bilang huling panuntunan.",
     "Home page": "Pahina ng panimula",

gui/default/assets/lang/lang-zh-HK.json

@@ -359,7 +359,7 @@
     "Start Browser": "啟動瀏覽器",
     "Statistics": "統計",
     "Stopped": "已停止",
-    "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "僅存儲和同步加密數據。所有連接設備上的文件夾都需要設置相同的密碼或類型為 「{%receiveEncrypted%}」。",
+    "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "僅存儲和同步加密數據。所有連接設備上的文件夾都需要設置相同的密碼或類型為 「{{receiveEncrypted}}」。",
     "Subject:": "主題：",
     "Support": "支持",
     "Support Bundle": "支持捆綁包",
@@ -498,6 +498,6 @@
     "items": "條目",
     "seconds": "秒",
     "{%device%} wants to share folder \"{%folder%}\".": "{{device}} 想將 「{{folder}}」 文件夾共享給您。",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} 想要共享「{{device}}」（{{folderlabel}}）文件夾給您。",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} 想要共享「{{folderlabel}}」（{{folder}}）文件夾給您。",
     "{%reintroducer%} might reintroduce this device.": "{{reintroducer}} 可能會重新引入此設備。"
 }

man/stdiscosrv.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STDISCOSRV" "1" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "STDISCOSRV" "1" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 stdiscosrv \- Syncthing Discovery Server
 .SH SYNOPSIS
@@ -112,7 +112,7 @@ entry from the list.
 .SS Description
 .sp
 This guide assumes that you have already set up Syncthing. If you
-haven’t yet, head over to \X'tty: link #getting-started'\fI\%Getting Started\fP\X'tty: link' first.
+haven’t yet, head over to \fI\%Getting Started\fP first.
 .SS Installing
 .sp
 Go to \X'tty: link https://github.com/syncthing/discosrv/releases'\fI\%releases\fP <\fBhttps://github.com/syncthing/discosrv/releases\fP>\X'tty: link' and

man/strelaysrv.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "STRELAYSRV" "1" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "STRELAYSRV" "1" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 strelaysrv \- Syncthing Relay Server
 .SH SYNOPSIS

man/syncthing-bep.7

@@ -28,7 +28,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-BEP" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-BEP" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-bep \- Block Exchange Protocol v1
 .SH INTRODUCTION AND DEFINITIONS
@@ -378,7 +378,7 @@ The \fBencryption_password_token\fP field contains a token derived from the pass
 used to encrypt data sent to this device. If the device is the same as the
 device sending the message, it signifies that the device itself has encrypted
 data that was encrypted with the given token. It is empty or missing if there is
-no encryption. See \X'tty: link #untrusted'\fI\%Untrusted Device Encryption\fP\X'tty: link' for details on the encryption scheme.
+no encryption. See \fI\%Untrusted Device Encryption\fP for details on the encryption scheme.
 .SS Index and Index Update
 .sp
 The Index and Index Update messages define the contents of the senders

man/syncthing-config.5

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-CONFIG" "5" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .SH SYNOPSIS
@@ -84,7 +84,7 @@ with a custom certificate for HTTPS as desired.
 .sp
 The database is by default stored in the same directory as the config, but
 the location may be overridden by the \fB\-\-data\fP or \fB\-\-home\fP flags or the
-corresponding environment varibles (\fB$STDATADIR\fP or \fBSTHOMEDIR\fP).
+corresponding environment variables (\fB$STDATADIR\fP or \fBSTHOMEDIR\fP).
 .sp
 The database directory contains the following files, among others:
 .INDENT 0.0
@@ -602,7 +602,7 @@ to \fB\-1\fP to always use weak hash. Default is \fB25\fP\&.
 .TP
 .B markerName
 Name of a directory or file in the folder root to be used as
-\X'tty: link #marker-faq'\fI\%How do I serve a folder from a read only filesystem?\fP\X'tty: link'\&. Default is \fB\&.stfolder\fP\&.
+\fI\%How do I serve a folder from a read only filesystem?\fP\&. Default is \fB\&.stfolder\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -751,7 +751,7 @@ element:
 .INDENT 0.0
 .TP
 .B id (mandatory)
-The \X'tty: link #device-ids'\fI\%device ID\fP\X'tty: link'\&.
+The \fI\%device ID\fP\&.
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1334,7 +1334,7 @@ automatic upgrades.
 .TP
 .B upgradeToPreReleases
 If \fBtrue\fP, automatic upgrades include release candidates (see
-\X'tty: link #releases'\fI\%Versions & Releases\fP\X'tty: link').
+\fI\%Versions & Releases\fP).
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1489,7 +1489,7 @@ addresses to global discovery.
 .TP
 .B sendFullIndexOnUpgrade
 Controls whether all index data is resent when an upgrade has happened,
-equivalent to starting Syncthing with \X'tty: link #cmdoption-reset-deltas'\fI\%\-\-reset\-deltas\fP\X'tty: link'\&.  This used
+equivalent to starting Syncthing with \fI\%\-\-reset\-deltas\fP\&.  This used
 to be the default behavior in older versions, but is mainly useful as a
 troubleshooting step and causes high database churn. The default is now
 \fBfalse\fP\&.
@@ -1616,7 +1616,7 @@ including the appropriate \fI\%folder.device\fP element underneath.
 Added in version 1.19.0.
 
 .sp
-Template for the \X'tty: link #ignoring-files'\fI\%ignore patterns\fP\X'tty: link' applied to new
+Template for the \fI\%ignore patterns\fP applied to new
 folders.  These are copied to the \fB\&.stignore\fP file when a folder is
 automatically accepted from a remote device.  The GUI uses them to pre\-fill
 the respective field when adding a new folder as well.  In XML, each pattern
@@ -1688,12 +1688,12 @@ accidentally if you sync your home folder between devices. A common symptom
 of syncing configuration files is two devices ending up with the same Device ID.
 .sp
 If you want to use Syncthing to backup your configuration files, it is recommended
-that the files you are backing up are in a \X'tty: link #folder-sendonly'\fI\%Send Only Folder\fP\X'tty: link' to prevent other
+that the files you are backing up are in a \fI\%Send Only Folder\fP to prevent other
 devices from overwriting the per device configuration. The folder on the remote
 device(s) should not be used as configuration for the remote devices.
 .sp
 If you’d like to sync your home folder in non\-send only mode, you may add the
-folder that stores the configuration files to the \X'tty: link #ignoring-files'\fI\%ignore list\fP\X'tty: link'\&.
+folder that stores the configuration files to the \fI\%ignore list\fP\&.
 If you’d also like to backup your configuration files, add another folder in
 send only mode for just the configuration folder.
 .SH AUTHOR

man/syncthing-device-ids.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-DEVICE-IDS" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .sp

man/syncthing-event-api.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-EVENT-API" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .SH DESCRIPTION
@@ -456,7 +456,7 @@ Added in version 0.11.12.
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-The \X'tty: link #statechanged'\fI\%StateChanged\fP\X'tty: link' event.
+The \fI\%StateChanged\fP event.
 .UNINDENT
 .UNINDENT
 .SS FolderPaused
@@ -716,7 +716,7 @@ Added in version 0.11.10: The \fBmetadata\fP action.
 
 .SS ListenAddressesChanged
 .sp
-This event is emitted when a \X'tty: link #listen-addresses'\fI\%listen address\fP\X'tty: link' changes.
+This event is emitted when a \fI\%listen address\fP changes.
 .INDENT 0.0
 .INDENT 3.5
 .sp
@@ -981,7 +981,7 @@ Deprecated since version v1.1.2: The \fBfolderID\fP field is a legacy name kept
 
 .SS RemoteDownloadProgress
 .sp
-This event is emitted when a \X'tty: link #download-progress'\fI\%DownloadProgress\fP\X'tty: link' message is
+This event is emitted when a \fI\%DownloadProgress\fP message is
 received. It returns a map \fBdata\fP of filenames with a count of
 downloaded blocks. The files in questions are currently being
 downloaded on the remote \fBdevice\fP and belong to \fBfolder\fP\&.

man/syncthing-faq.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-FAQ" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .INDENT 0.0
@@ -164,7 +164,7 @@ Directory modification times (not preserved)
 Hard links (followed, not preserved)
 .IP \(bu 2
 Windows junctions (synced as ordinary directories; require enabling in
-\X'tty: link #config-option-folder.junctionsasdirs'\fI\%the configuration\fP\X'tty: link' on a per\-folder
+\fI\%the configuration\fP on a per\-folder
 basis)
 .IP \(bu 2
 Resource forks (not preserved)
@@ -176,7 +176,7 @@ Devices, FIFOs, and other specials (ignored)
 Sparse file sparseness (will become sparse, when supported by the OS & filesystem)
 .IP \(bu 2
 Syncthing internal files and folders (e.g. \fB\&.stfolder\fP, \fB\&.stignore\fP,
-\fB\&.stversions\fP, \X'tty: link #temporary-files'\fI\%temporary files\fP\X'tty: link', etc.)
+\fB\&.stversions\fP, \fI\%temporary files\fP, etc.)
 .UNINDENT
 .SS Is synchronization fast?
 .sp
@@ -191,7 +191,7 @@ manner. This means that renaming a file will not cause a retransmission of
 that file. Additionally, appending data to existing files should be handled
 efficiently as well.
 .sp
-\X'tty: link #temporary-files'\fI\%Temporary files\fP\X'tty: link' are used to store partial data
+\fI\%Temporary files\fP are used to store partial data
 downloaded from other devices. They are automatically removed whenever a file
 transfer has been completed or after the configured amount of time which is set
 in the configuration file (24 hours by default).
@@ -236,7 +236,7 @@ oyster!)
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-\X'tty: link #device-ids'\fI\%Understanding Device IDs\fP\X'tty: link'
+\fI\%Understanding Device IDs\fP
 .UNINDENT
 .UNINDENT
 .SH TROUBLESHOOTING
@@ -262,7 +262,7 @@ Devices” list on the right side of the GUI, double check that you see
 .sp
 If you are connected via a relay, this is because a direct connection could
 not be established. Double check and follow the suggestions in
-\X'tty: link #firewall-setup'\fI\%Firewall Setup\fP\X'tty: link' to enable direct connections.
+\fI\%Firewall Setup\fP to enable direct connections.
 .sp
 Second, if one of the devices is a very low powered machine (a Raspberry Pi,
 or a phone, or a NAS, or similar) you are likely constrained by the CPU on
@@ -295,8 +295,8 @@ causes a certain amount of extra CPU usage to calculate the summary data it
 presents. Note however that once things are \fIin sync\fP CPU usage should be
 negligible.
 .sp
-To minimize the impact of this, Syncthing attempts to \X'tty: link #config-option-options.setlowpriority'\fI\%lower the
+To minimize the impact of this, Syncthing attempts to \fI\%lower the
-process priority\fP\X'tty: link' when starting up.
+process priority\fP when starting up.
 .sp
 To further limit the amount of CPU used when syncing and scanning, set the
 environment variable \fBGOMAXPROCS\fP to the maximum number of CPU cores
@@ -328,7 +328,7 @@ protect against unauthorized access. Either:
 .IP \(bu 2
 Make sure the proxy sets a \fBHost\fP header containing \fBlocalhost\fP, or
 .IP \(bu 2
-Set \X'tty: link #config-option-gui.insecureskiphostcheck'\fI\%gui.insecureSkipHostcheck\fP\X'tty: link' in the advanced settings, or
+Set \fI\%gui.insecureSkipHostcheck\fP in the advanced settings, or
 .IP \(bu 2
 Bind the GUI/API to a non\-localhost listen port.
 .UNINDENT
@@ -338,8 +338,8 @@ In all cases, username/password authentication and HTTPS should be used.
 .sp
 This is almost always a result of bad RAM, storage device or other hardware.
 When the index database is found to be corrupt Syncthing cannot operate and will
-note this in the logs and exit. To overcome this delete the \X'tty: link #config-locations'\fI\%database
+note this in the logs and exit. To overcome this delete the \fI\%database
-folder\fP\X'tty: link' inside Syncthing’s data directory and re\-start
+folder\fP inside Syncthing’s data directory and re\-start
 Syncthing. It will then need to perform a full re\-hashing of all shared
 folders. You should check your system in case the underlying cause is indeed
 faulty hardware which may put the system at risk of further data loss.
@@ -374,7 +374,7 @@ up\-to\-date state with all the neighbours.
 .SS Why does Syncthing connect to this unknown/suspicious address?
 .sp
 If you see outgoing connections to odd and unexpected addresses these are
-most likely connections to \X'tty: link #relaying'\fI\%relay servers\fP\X'tty: link'\&. Relay servers
+most likely connections to \fI\%relay servers\fP\&. Relay servers
 are run by volunteers all over the world. They usually listen on ports 443 or
 22067, though this is controlled by the user running it. You can compare the
 address you are concerned about with \X'tty: link https://relays.syncthing.net'\fI\%the current list of active relays\fP <\fBhttps://relays.syncthing.net\fP>\X'tty: link'\&. Relays do not and can not see the data
@@ -420,7 +420,7 @@ Also see the \fI\%marker FAQ\fP for more information about the folder marker.
 \fBSEE ALSO:\fP
 .INDENT 0.0
 .INDENT 3.5
-\X'tty: link #conflict-handling'\fI\%Conflicting Changes\fP\X'tty: link'
+\fI\%Conflicting Changes\fP
 .UNINDENT
 .UNINDENT
 .SS How do I serve a folder from a read only filesystem?
@@ -682,7 +682,7 @@ echo 204800 | sudo tee /proc/sys/fs/inotify/max_user_watches
 .SS How do I reset the GUI password?
 .sp
 If you’ve forgotten / lost the GUI password, you can reset it using the
-\X'tty: link #cmdoption-gui-password'\fI\%\-\-gui\-password\fP\X'tty: link' (and possibly \X'tty: link #cmdoption-gui-user'\fI\%\-\-gui\-user\fP\X'tty: link') options to the
+\fI\%\-\-gui\-password\fP (and possibly \fI\%\-\-gui\-user\fP) options to the
 \fBsyncthing generate\fP subcommand.  This should be done while Syncthing is not
 running.
 .INDENT 0.0
@@ -694,7 +694,7 @@ Stop Syncthing: \fBsyncthing cli operations shutdown\fP
 Restart Syncthing as usual.
 .UNINDENT
 .sp
-\fIAlternatively, in step 2\fP, you can manually delete the \X'tty: link #config-option-gui.user'\fI\%<user>\fP\X'tty: link' and \X'tty: link #config-option-gui.password'\fI\%<password>\fP\X'tty: link' XML tags from the
+\fIAlternatively, in step 2\fP, you can manually delete the \fI\%<user>\fP and \fI\%<password>\fP XML tags from the
 \fB<gui>\fP block in file \fBconfig.xml\fP\&.  The location of the file depends on the
 OS and is described in the \fI\%configuration documentation\fP\&.
 .sp

man/syncthing-globaldisco.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-GLOBALDISCO" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-GLOBALDISCO" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-globaldisco \- Global Discovery Protocol v3
 .SH ANNOUNCEMENTS

man/syncthing-localdisco.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-LOCALDISCO" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-LOCALDISCO" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-localdisco \- Local Discovery Protocol v4
 .SH MODE OF OPERATION
@@ -55,7 +55,7 @@ previously unknown device is discovered or a device has restarted (see the
 .SH DEVICE ID
 .sp
 The device ID is the SHA\-256 (32 bytes) of the device X.509 certificate. See
-\X'tty: link #device-ids'\fI\%Understanding Device IDs\fP\X'tty: link' in the Syncthing documentation.
+\fI\%Understanding Device IDs\fP in the Syncthing documentation.
 .SH ANNOUNCEMENT PACKET
 .sp
 The Announcement packet has the following structure:

man/syncthing-networking.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-NETWORKING" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .SH ROUTER SETUP
@@ -55,7 +55,7 @@ Communication in Syncthing works both ways. Therefore if you set up port
 forwards for one device, other devices will be able to connect to it even when
 they are behind a NAT network or firewall.
 .sp
-In the absence of port forwarding, \X'tty: link #relaying'\fI\%Relaying\fP\X'tty: link' may work well enough to get
+In the absence of port forwarding, \fI\%Relaying\fP may work well enough to get
 devices connected and synced, but will perform poorly in comparison to a
 direct connection.
 .SS Local Discovery
@@ -159,7 +159,7 @@ port 8384 on the target machine. This still works even if Syncthing is bound to
 listen on localhost only.
 .SH VIA A PROXY
 .sp
-Syncthing can use a SOCKS5 proxy for outbound connections. Please see \X'tty: link #proxying'\fI\%Using Proxies\fP\X'tty: link'\&.
+Syncthing can use a SOCKS5 proxy for outbound connections. Please see \fI\%Using Proxies\fP\&.
 .SH AUTHOR
 The Syncthing Authors
 .SH COPYRIGHT

man/syncthing-relay.7

@@ -28,7 +28,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-RELAY" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-RELAY" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-relay \- Relay Protocol v1
 .SH WHAT IS A RELAY?

man/syncthing-rest-api.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-REST-API" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .sp
@@ -102,7 +102,7 @@ $ curl \-H \(dqX\-API\-Key: yourkey\(dq localhost:8384/rest/system/browse?curren
 .UNINDENT
 .SS GET /rest/system/config (DEPRECATED)
 .sp
-Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use \X'tty: link #rest-config'\fI\%/rest/config\fP\X'tty: link'
+Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use \fI\%/rest/config\fP
 instead.
 
 .sp
@@ -371,7 +371,7 @@ Returns the current configuration.
 .SS GET /rest/system/config/insync (DEPRECATED)
 .sp
 Deprecated since version v1.12.0: This endpoint still works as before but is deprecated. Use
-\X'tty: link #rest-config-insync'\fI\%/rest/config/restart\-required\fP\X'tty: link' instead.
+\fI\%/rest/config/restart\-required\fP instead.
 
 .sp
 Returns whether the config is in sync, i.e. whether the running
@@ -395,7 +395,7 @@ instead.
 Post the full contents of the configuration, in the same format as returned by
 the corresponding GET request. When posting the configuration succeeds,
 the posted configuration is immediately applied, except for changes that require a restart. Query
-\X'tty: link #rest-config-insync'\fI\%/rest/config/restart\-required\fP\X'tty: link' to check if a restart is required.
+\fI\%/rest/config/restart\-required\fP to check if a restart is required.
 .sp
 This endpoint is the main point to control Syncthing, even if the change only
 concerns a very small part of the config: The usual workflow is to get the
@@ -682,7 +682,7 @@ curl \-X POST \-H \(dqX\-API\-Key: abc123\(dq http://localhost:8384/rest/system/
 .UNINDENT
 .UNINDENT
 .sp
-\fBCaution\fP: See \X'tty: link #cmdoption-reset-database'\fI\%\-\-reset\-database\fP\X'tty: link' for \fB\&.stfolder\fP creation
+\fBCaution\fP: See \fI\%\-\-reset\-database\fP for \fB\&.stfolder\fP creation
 side\-effect and caution regarding mountpoints.
 .SS POST /rest/system/restart
 .sp
@@ -902,7 +902,7 @@ patterns to be used by default on folders, as an array of single\-line strings.
 \fBNOTE:\fP
 .INDENT 0.0
 .INDENT 3.5
-The \X'tty: link #config-option-gui.password'\fI\%gui.password\fP\X'tty: link' configuration option has special handling to
+The \fI\%gui.password\fP configuration option has special handling to
 accept already hashed passwords.  Any valid bcrypt hash is stored verbatim,
 while a plaintext password is first hashed.
 .UNINDENT
@@ -1035,7 +1035,7 @@ Added in version 0.14.53.
 Takes one mandatory parameter, \fBfolder\fP, and returns the list of errors
 encountered during scanning or pulling.
 .sp
-The results can be paginated using the \X'tty: link #rest-pagination'\fI\%common pagination parameters\fP\X'tty: link'\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
@@ -1418,7 +1418,7 @@ were changed locally in a receive\-only folder.  Thus they differ from the globa
 state and could be reverted by pulling from remote devices again, see
 \fI\%POST /rest/db/revert\fP\&.
 .sp
-The results can be paginated using the \X'tty: link #rest-pagination'\fI\%common pagination parameters\fP\X'tty: link'\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
@@ -1455,7 +1455,7 @@ Use sparingly.
 Takes one mandatory parameter, \fBfolder\fP, and returns lists of files which are
 needed by this device in order for it to become in sync.
 .sp
-The results can be paginated using the \X'tty: link #rest-pagination'\fI\%common pagination parameters\fP\X'tty: link'\&.  Pagination happens, across the union of all needed files,
+The results can be paginated using the \fI\%common pagination parameters\fP\&.  Pagination happens, across the union of all needed files,
 that is \- across all 3 sections of the response.  For example, given the current
 need state is as follows:
 .INDENT 0.0
@@ -1559,7 +1559,7 @@ Takes the mandatory parameters \fBfolder\fP and \fBdevice\fP, and returns the li
 of files which are needed by that remote device in order for it to become in
 sync with the shared folder.
 .sp
-The results can be paginated using the \X'tty: link #rest-pagination'\fI\%common pagination parameters\fP\X'tty: link'\&.
+The results can be paginated using the \fI\%common pagination parameters\fP\&.
 .INDENT 0.0
 .INDENT 3.5
 .sp
@@ -1730,7 +1730,7 @@ To receive events, perform a HTTP GET of \fB/rest/events\fP\&.
 .sp
 To filter the event list, in effect creating a specific subscription for only
 the desired event types, add a parameter \fBevents=EventTypeA,EventTypeB,...\fP
-where the event types are any of the \X'tty: link #event-types'\fI\%Event Types\fP\X'tty: link'\&.  If no filter is
+where the event types are any of the \fI\%Event Types\fP\&.  If no filter is
 specified, all events \fIexcept\fP \fI\%LocalChangeDetected\fP and
 \fI\%RemoteChangeDetected\fP are included.
 .sp
@@ -1908,7 +1908,7 @@ Returns the data sent in the anonymous usage report.
 .SH DEBUG ENDPOINTS
 .SS Debug Endpoints
 .sp
-These endpoints require the \X'tty: link #config-option-gui.debugging'\fI\%gui.debugging\fP\X'tty: link' configuration option to
+These endpoints require the \fI\%gui.debugging\fP configuration option to
 be enabled and yield an access denied error code otherwise.
 .SS GET /rest/debug/peerCompletion
 .sp

man/syncthing-security.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-SECURITY" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .sp

man/syncthing-stignore.5

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-STIGNORE" "5" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .SH SYNOPSIS
@@ -124,7 +124,7 @@ more general patterns that follow.
 .INDENT 3.5
 Negated patterns that can match items below the folder root will cause
 Syncthing to traverse otherwise ignored directories. If the
-\X'tty: link #scanning'\fI\%watcher\fP\X'tty: link' is enabled, those directories will also be
+\fI\%watcher\fP is enabled, those directories will also be
 watched. Directories ignored before the first negated pattern can
 however be safely skipped, since the first matching pattern wins. For
 example:

man/syncthing-versioning.7

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING-VERSIONING" "7" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING-VERSIONING" "7" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing-versioning \- Keep automatic backups of deleted files by other nodes
 .sp
@@ -285,7 +285,7 @@ files permanently.
 .SH CONFIGURATION PARAMETER REFERENCE
 .sp
 The versioning settings are grouped into their own section of each folder in the
-\X'tty: link #config-option-folder.versioning'\fI\%configuration file\fP\X'tty: link'\&.  The following shows an
+\fI\%configuration file\fP\&.  The following shows an
 example of such a section in the XML:
 .INDENT 0.0
 .INDENT 3.5
@@ -326,7 +326,7 @@ in the \fI\%params\fP element.
 .B versioning.fsType
 The internal file system implementation used to access this versions folder.
 Only applies if \fI\%fsPath\fP is also set non\-empty,
-otherwise the \X'tty: link #config-option-folder.filesystemtype'\fI\%filesystemType\fP\X'tty: link' from the folder element is used
+otherwise the \fI\%filesystemType\fP from the folder element is used
 instead.  Refer to that option description for possible values.  Ignored for
 the \fBexternal\fP versioning strategy.
 .sp

man/syncthing.1

@@ -27,7 +27,7 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "SYNCTHING" "1" "Jul 09, 2024" "v1.27.7" "Syncthing"
+.TH "SYNCTHING" "1" "Jul 18, 2024" "v1.27.7" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .SH SYNOPSIS
@@ -367,7 +367,7 @@ it is validated and updated to the latest configuration schema, including adding
 default values for any new options.
 .sp
 The \fBdecrypt\fP subcommand is used in conjunction with untrusted (encrypted)
-devices, see the relevant section on \X'tty: link #untrusted-decrypt'\fI\%decryption\fP\X'tty: link' for
+devices, see the relevant section on \fI\%decryption\fP for
 details.  It does not depend on Syncthing to be running, but works on offline
 data.
 .sp