When creating an initial default config, we usually probe for a free
TCP port. But when a UNIX socket is specified via the `STGUIADDRESS=`
override or the `--gui-address=unix:///...` command line syntax, parsing
that option will fail during port probing.
The solution is to just skip the port probing when the address is
determined to specify something other than a TCP socket.
### Testing
Start with a fresh home directory each time.
1. Specify a UNIX socket for the GUI (works with this PR):
TMPHOME=$(mktemp -d); ./syncthing --home=$TMPHOME
--gui-address=unix://$TMPHOME/socket
2. Specify no GUI address (probes for a free port if default is taken,
as before):
TMPHOME=$(mktemp -d); ./syncthing --home=$TMPHOME
3. Specify a TCP GUI address (probes whether the given port is taken,
as before):
TMPHOME=$(mktemp -d); ./syncthing --home=$TMPHOME
--gui-address=127.0.0.1:8385
At a high level, this is what I've done and why:
- I'm moving the protobuf generation for the `protocol`, `discovery` and
`db` packages to the modern alternatives, and using `buf` to generate
because it's nice and simple.
- After trying various approaches on how to integrate the new types with
the existing code, I opted for splitting off our own data model types
from the on-the-wire generated types. This means we can have a
`FileInfo` type with nicer ergonomics and lots of methods, while the
protobuf generated type stays clean and close to the wire protocol. It
does mean copying between the two when required, which certainly adds a
small amount of inefficiency. If we want to walk this back in the future
and use the raw generated type throughout, that's possible, this however
makes the refactor smaller (!) as it doesn't change everything about the
type for everyone at the same time.
- I have simply removed in cold blood a significant number of old
database migrations. These depended on previous generations of generated
messages of various kinds and were annoying to support in the new
fashion. The oldest supported database version now is the one from
Syncthing 1.9.0 from Sep 7, 2020.
- I changed config structs to be regular manually defined structs.
For the sake of discussion, some things I tried that turned out not to
work...
### Embedding / wrapping
Embedding the protobuf generated structs in our existing types as a data
container and keeping our methods and stuff:
```
package protocol
type FileInfo struct {
*generated.FileInfo
}
```
This generates a lot of problems because the internal shape of the
generated struct is quite different (different names, different types,
more pointers), because initializing it doesn't work like you'd expect
(i.e., you end up with an embedded nil pointer and a panic), and because
the types of child types don't get wrapped. That is, even if we also
have a similar wrapper around a `Vector`, that's not the type you get
when accessing `someFileInfo.Version`, you get the `*generated.Vector`
that doesn't have methods, etc.
### Aliasing
```
package protocol
type FileInfo = generated.FileInfo
```
Doesn't help because you can't attach methods to it, plus all the above.
### Generating the types into the target package like we do now and
attaching methods
This fails because of the different shape of the generated type (as in
the embedding case above) plus the generated struct already has a bunch
of methods that we can't necessarily override properly (like `String()`
and a bunch of getters).
### Methods to functions
I considered just moving all the methods we attach to functions in a
specific package, so that for example
```
package protocol
func (f FileInfo) Equal(other FileInfo) bool
```
would become
```
package fileinfos
func Equal(a, b *generated.FileInfo) bool
```
and this would mostly work, but becomes quite verbose and cumbersome,
and somewhat limits discoverability (you can't see what methods are
available on the type in auto completions, etc). In the end I did this
in some cases, like in the database layer where a lot of things like
`func (fv *FileVersion) IsEmpty() bool` becomes `func fvIsEmpty(fv
*generated.FileVersion)` because they were anyway just internal methods.
Fixes#8247
### Purpose
When generating a new `config.xml` file with default options, the GUI
address is populated with a hard-coded default value of
`127.0.0.1:8384`, except for a random free port if that default one is
occupied. This is independent from the GUI configuration default address
defined in the protobuf description. More importantly, it ignores any
`STGUIADDRESS` override given via environment variable or command-line
option, thus probing for the default port instead of the one specified
via override.
The `ProbeFreePorts()` function now respects the override, by reading
the `GUIConfiguration.Address()` method instead of using hard-coded
defaults.
When not calling `ProbeFreePorts()`, the override should still be
persisted rather than the default address. This happens only when
generating a fresh default `config.xml`, never on an existing one.
There was a bug that the unique ID was not set when reporting was
enabled, and thus the reports where rejected by the server. The unique
ID got set only on startup, so next time Syncthing restarted.
This makes sure to set the unique ID when blank.
This changes the two remaining instances where we use insecure HTTPS to
use standard HTTPS certificate verification.
When we introduced these things, almost a decade ago, HTTPS certificates
were expensive and annoying to get, much of the web was still HTTP, and
many devices seemed to not have up-to-date CA bundles.
Nowadays _all_ of the web is HTTPS and I'm skeptical that any device can
work well without understanding LetsEncrypt certificates in particular.
Our current discovery servers use hardcoded certificates which has
several issues:
- Not great for security if it leaks as there is no way to rotate it
- Not great for infrastructure flexibility as we can't use many load
balancer or TLS termination services
- The certificate is a very oddball ECDSA-SHA384 type certificate which
has higher CPU cost than a more regular certificate, which has real
effects on our infrastructure
Using normal TLS certificates here improves these things.
I expect there will be some very few devices out there for which this
doesn't work. For the foreseeable future they can simply change the
config to use the old URLs and parameters -- it'll be years before we
can retire those entirely.
For the upgrade client this simply seems like better hygiene. While our
releases are signed anyway, protecting the metadata exchange is _better_
and, again, I doubt many clients will fail this today.
This adds a header with the operating system version, verbatim in
whatever format the operating system reports it, to the upgrade check.
The intention is that the upgrade server can use this information to
filter out (or maybe just mark) potentially unsupported upgrades.
### Purpose
Avoid the issue where the folder marker is deleted by overzealous
cleanup tools because it's just a useless, empty directory.
We create a small file containing a an admonishment to not delete the
directory, and some metadata that is just for human consumption at the
moment. (But it would parse as a valid yaml file if we wanted to read
this, at some point.)
This will only apply when _creating_ a folder marker, that is, existing
setups will not gain the file automatically. Obviously, when using a
custom folder marker none of this applies.
Also, slightly adjust the permission bits for the folder marker directory and file on Unixes, making sure the group & write bits are unset.
### Testing
I've created and deleted a few folders and it appears to behave as I
expect.
### Screenshots
```
jb@ok:~/somefolder % ls -la
total 0
drwxr-xr-x 3 jb staff 96 May 1 08:52 ./
drwx------ 12 jb staff 384 May 1 08:52 ../
drwxr-xr-x 3 jb staff 96 May 1 08:52 .stfolder/
jb@ok:~/somefolder % ls -l .stfolder
total 8
-rw-r--r-- 1 jb staff 122 May 1 08:52 syncthing-folder-39a4b0.txt
jb@ok:~/somefolder % cat .stfolder/syncthing-folder-39a4b0.txt
# This directory is a Syncthing folder marker.
# Do not delete.
folderID: xtdca-cudyf
created: 2024-05-01T08:52:49+02:00
```
Currently the maximum delay is always derived automatically from the
initial delay. This is fine in most cases, but for some use cases (large
files that take a long time to write) we need to be able to set a longer
max delay than the computed value (e.g., 15s delay with 10min timeout).
improve parsing of gui-address overrides
make checks for whether the gui-address is overridden consistent by
checking whether the environment variable is set and not an empty
string. the `Network()` function however checked for the inclusion of
a slash instead of the presence of any characters. If the config file's
gui address was set to a unix socket and the gui override to a tcp
address, then the function would have wrongly returned "unix".
the `URL()` function always returned the config file's gui address if a
unix socket was configured, even if an override was specified.
the `URL()` function wrongly formatted unix addresses. the http(s)
protocol was used as the sheme and the path was percent escaped. because
of the previous bug, this could only be triggered if the config file's
gui address was tcp and an unix socket override was given.
simplify the `useTLS()` function's codepath for overrides.
Co-authored-by: digital <didev@dinid.net>
This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Safety check added in v1.23.6 introduced bug. Bug unshares folders with untrusted devices if folder does not have an encryption password set, regardless of whether the folder is shared with the untrusted device as encrypted or not. Prevents sharing with untrusted devices in some cases where sharing would be encrypted.
Patch preserves safety check but permits sharing folders with untrusted devices if they are shared as encrypted.
Signed-off-by: kewiha <keithh@protonmail.com>
This prevents combining untrusted with introducer and auto-accept, and
also verifies that folders shared with untrusted devices have passwords
at config loading time.
Co-authored-by: Simon Frei <freisim93@gmail.com>
We usually want to ensure that our own device is present. However if the
given device ID is the empty ID, we shouldn't do that. This is a
legimate (though way too non-obvious) use-case when opening the config
without knowing/caring about the device ID.
This fixes various test issues with Go 1.20.
- Most tests rewritten to use fakefs where possible
- Some tests that were already skipped, or dubious (invasive,
unmaintainable, unclear what they even tested) have been removed
- Some actual code rewritten to better support testing in fakefs
Co-authored-by: Eric P <eric@kastelo.net>
This makes the various protocol priorities configurable among the other
options. With this, it's possible to prefer QUIC over TCP for WAN
connections, for example. Both sides need to be similarly configured for
this to work properly.
The default priority order remains the same as previously (TCP, QUIC,
Relay, with LAN better than WAN).
To make this happen I made each dialer & listener more priority aware,
and moved the check for whether a connection is LAN or not into the
dialer / listener -- this is the new "lanChecker" type that's passed
around.
Allow the watcher delay to take fractional values, effectively allowing
for much shorter delays. The minimum value is limited at 0.01, which
effectively translates to 10ms. This is required in order to guarantee
that there is still enough time to aggregate multiple single change
events.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds support for syncing extended attributes on supported
filesystem on Linux, macOS, FreeBSD and NetBSD. Windows is currently
excluded because the APIs seem onerous and annoying and frankly the uses
cases seem few and far between. On Unixes this also covers ACLs as those
are stored as extended attributes.
Similar to ownership syncing this will optional & opt-in, which two
settings controlling the main behavior: one to "sync" xattrs (read &
write) and another one to "scan" xattrs (only read them so other devices
can "sync" them, but not apply any locally).
Co-authored-by: Tomasz Wilczyński <twilczynski@naver.com>
This replaces old style errors.Wrap with modern fmt.Errorf and removes
the (direct) dependency on github.com/pkg/errors. A couple of cases are
adjusted by hand as previously errors.Wrap(nil, ...) would return nil,
which is not what fmt.Errorf does.
all: Add package runtimeos for runtime.GOOS comparisons
I grew tired of hand written string comparisons. This adds generated
constants for the GOOS values, and predefined Is$OS constants that can
be iffed on. In a couple of places I rewrote trivial switch:es to if:s,
and added Illumos where we checked for Solaris (because they are
effectively the same, and if we're going to target one of them that
would be Illumos...).
This adds support for syncing ownership on Unixes and on Windows. The
scanner always picks up ownership information, but it is not applied
unless the new folder option "Sync Ownership" is set.
Ownership data is stored in a new FileInfo field called "platform data". This
is intended to hold further platform-specific data in the future
(specifically, extended attributes), which is why the whole design is a
bit overkill for just ownership.
This commit replaces `os.MkdirTemp` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `os.MkdirTemp`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Staggered File Versioning used to have its own cleanInterval that
controlled how often file versions were cleaned. Nowadays, there is a
seperate setting called cleanupIntervalS responsible for the cleanup,
which applies to all File Versioning (except External). Thus, remove the
unneeded code and don't set the param up on new folders anymore.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* cmd/syncthing: Remove unnecessary function arguments.
The openGUI() function does not need a device ID to work, and there is
only one caller anyway which uses EmptyDeviceID.
The loadOrDefaultConfig() function is always called with the same
dummy values.
* cmd/syncthing: Avoid misleading info messages from monitor process.
In order to check whether panic reporting is enabled, the monitor
process utilizes the loadOrDefaultConfig() function. In case there is
no config file yet, info messages may be logged during creation if the
config Wrapper, which is discarded immediately after.
Stop using the DefaultConfig() utility function from lib/syncthing and
directly generate a minimal config instead to avoid these.
Add comments to loadOrDefaultConfig() explaining its limited purpose.
* cmd/syncthing/generate: Always write updated config file.
Previously, an existing config file was left untouched unless either
of the --gui-user or --gui-password options was given. Remove that
condition and simplify the checking code.
* lib/config: Factor out ProbeFreePorts().
* cmd/syncthing: Add option --skip-port-probing.
Applies to both the "generate" and "serve" subcommands, as well as the
deprecated --generate option, just as the --no-default-folder flag.
What hash is used to store the password should ideally be an
implementation detail, so that every user of the GUIConfiguration
object automatically agrees on how to handle it. That is currently
distribututed over the confighandler.go and api_auth.go files, plus
tests.
Add the SetHasedPassword() / CompareHashedPassword() API to keep the
hashing method encapsulated. Add a separate test for it and adjust
other users and tests. Remove all deprecated imports of the bcrypt
package.
The current detection is flawed, because it looks for a few specific
file systems like "msdos" or "fat" to set the mtime window, while in
reality Android seems to report names like "fuseblk", which can stand
for fat, ext4, or even f2fs.
At the moment, we set the mtime window only for a few known names used
for the fat filesystem. With this change, we take a safer approach of
always setting the time window unless we explicitly detect file systems
like ext2/ext3/ex4, which are known not to experience issues with moving
timestamps on Android.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
