Commit Graph

149 Commits

Author SHA1 Message Date
Audrius Butkevicius
0da0774ce4 lib/connections: Add KCP support (fixes #804)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3489
2017-03-07 12:44:16 +00:00
Simon Frei
c20d612736 cmd/syncthing, lib/model: Handle rel/abs paths for config/protected paths (fixes #3183)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3995
2017-03-04 07:49:48 +00:00
Jakob Borg
89f8be40c6 lib/model: Use ignore patterns in remote completion calculation
Basically, if we don't care about the sync status of the file we should
not tag someone else out of sync because they don't have the latest
version. This solves *my* "Syncing - 100%" scenario at least.

The reason this happens seems to be like this, in my situation. I have
three devices, connected in a "line": A-B-C. A is a Mac and litters
.DS_Store files everywhere. I've ignored these, but some escaped into
the folders before I did so. I've also ignored them on B and C but at
different stages. B was flagging C as out of sync, because at the point
the ignores were introduced C had a lower version of .DS_Store than A.
Now none of them are sending updates about it any more since it's
ignored...

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3981
2017-02-10 11:22:09 +00:00
Simon Frei
22903df2c1 lib/model: Meaningful error messages for paused folders
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3977
LGTM: AudriusButkevicius, calmh
2017-02-09 20:29:56 +00:00
Jakob Borg
f7fc0c1d3e all: Update license url to https (ref #3976) 2017-02-09 08:04:16 +01:00
Jakob Borg
c4ba580cbb all: Remove symlink support on Windows, SymlinksEnabled config
After this change,

- Symlinks on Windows are always unsupported. Sorry.

- Symlinks are always enabled on other platforms. They are just a small
  file like anything else. There is no need to special case them. If you
  don't want to sync some symlinks, ignore them.

- The protocol doesn't differentiate between different "types" of
  symlinks. If that distinction ever does become relevant the individual
  devices can figure it out by looking at the destination when they
  create the link.

It's backwards compatible in that all the old symlink types are still
understood to be symlinks, and the new SYMLINK type is equivalent to the
old SYMLINK_UNKNOWN which was always a valid way to do it.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3962
LGTM: AudriusButkevicius
2017-02-07 08:34:24 +00:00
Audrius Butkevicius
67acef1794 lib/weakhash, lib/model, cmd/syncthing: Decide if to use weakhash on startup (fixes #3938)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3949
2017-02-06 10:27:11 +00:00
Audrius Butkevicius
dd78177ae0 scanner: Allow disabling weak hash in scanning (fixes #3891)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3905
2017-01-23 13:50:32 +00:00
Simon Frei
dbb3a34887 lib/ignore: Centralize handling of temporary filenames (fixes #3899)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3901
LGTM: calmh, AudriusButkevicius
2017-01-17 07:33:48 +00:00
Audrius Butkevicius
1a1e35d998 lib/osutil: Replace IsDir with TraversesSymlink (fixes #3839)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3883
LGTM: calmh
2017-01-10 07:09:31 +00:00
Adel Qalieh
8d2a31e38e lib/model: Remove syncthing-specific files (fixes #3819)
Syncthing adds some hidden files when a folder is added, but there is currently
no equivalent cleanup procedure. This change is conservative as not to
accidentally cause data loss.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3874
2017-01-07 17:05:30 +00:00
Jakob Borg
ec62888539 lib/connections: Allow on the fly changes to rate limits (fixes #3846)
Also replaces github.com/juju/ratelimit with golang.org/x/time/rate as
the latter supports changing the rate on the fly.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3862
2017-01-02 11:29:20 +00:00
Jakob Borg
f5a310ad64 Revert "lib/model: Handle filename conflicts on Windows."
This reverts commit 01e50eb3fa.
2016-12-23 11:10:58 +01:00
Unrud
01e50eb3fa lib/model: Handle filename conflicts on Windows.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3810
LGTM: calmh
2016-12-22 23:04:53 +00:00
Audrius Butkevicius
bab7c8ebbf all: Add folder pause, make pauses permanent (fixes #3407, fixes #215, fixes #3001)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3520
2016-12-21 18:41:25 +00:00
Nathan Morrison
0725e3af38 all: Add a global change list
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3694
2016-12-21 16:35:20 +00:00
Jakob Borg
ead7281c20 build: Enable gometalinter "unused" check 2016-12-21 14:53:45 +01:00
AudriusButkevicius
aa3ef49dd7 lib/model: Fix lock order
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3823
2016-12-21 12:22:18 +00:00
Jakob Borg
226da976dc lib/model: Allow empty subdirs in scan request (fixes #3829)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3833
2016-12-21 10:33:07 +00:00
Jakob Borg
2f770f8bfb lib/config, lib/protocol: Improve folder description with empty label 2016-12-19 10:12:06 +01:00
Jakob Borg
f67c5a2fd6 lib/model: Don't send symlinks to old devices that can't handle them (fixes #3802)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3811
2016-12-17 19:48:33 +00:00
Heiko Zuerker
398c356f22 lib/model: Clarify master terminology (fixes #2679)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3793
2016-12-16 22:23:35 +00:00
Jakob Borg
abb8a1914a lib/model: Accept scan requests of paths ending in slash (fixes #3804)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3805
2016-12-16 11:21:22 +00:00
Jakob Borg
3582783972 lib/model, lib/osutil: Verify target directory before pulling / requesting
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3798
2016-12-13 10:24:10 +00:00
Lars K.W. Gohlke
8ce9b026e9 lib/model: Minor cleanups
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3765
2016-12-06 08:54:04 +00:00
Jakob Borg
e3cf718998 lib/ignore: Add central check for internal files, used in scanning, pulling and requests
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3779
2016-12-01 14:00:11 +00:00
Jakob Borg
63194a37f6 lib/model: Double check results in filepath.Join where needed
Wherever we have untrusted relative paths, make sure they are not
escaping their folder root.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3776
2016-12-01 12:35:11 +00:00
Jakob Borg
ed4f6fc4b3 lib/connections, lib/model: Connection service should expose a single interface
Makes testing easier, which we'll need

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3771
2016-11-30 07:54:20 +00:00
Jakob Borg
8559e20237 lib/osutil: Don't chmod in atomic file creation (fixes #2472)
Instead, trust (and test) that the temp file has appropriate permissions
from the start. The only place where this changes our behavior is for
ignores which go from 0644 to 0600. I'm OK with that.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3756
2016-11-23 14:06:08 +00:00
Jakob Borg
cc9a9fb390 lib/model, lib/protocol: Add Folder.Description() for logging (ref #3741) 2016-11-22 08:36:14 +01:00
Roman Zaynetdinov
d3a251e6d9 lib/model: Log folder IDs and labels (fixes #3724)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3741
2016-11-21 20:09:18 +01:00
Jakob Borg
a8a0bc356a lib/model: Minor cleanup to not fondle cfg.Raw things in handleDeintroductions
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3739
2016-11-17 08:56:55 +00:00
Jakob Borg
faee1d5a8d lib/model: Fix locking around introduction handling (fixes #3737)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3738
2016-11-17 08:50:24 +00:00
Jakob Borg
3088dac33b lib/model: Clean up generateClusterConfig, fix spurious test failure by sorting 2016-11-17 07:45:45 +01:00
Audrius Butkevicius
f60b424d70 lib/config: Raw() -> RawCopy() 2016-11-13 09:29:35 +01:00
Audrius Butkevicius
a1a91d5ef4 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-13 09:29:33 +01:00
Jakob Borg
59f3d1445f Revert "lib/model: Introducer can remove stuff it introduced (fixes #1015)"
This reverts commit 0b88cf1d03.
2016-11-12 08:38:29 +01:00
Audrius Butkevicius
0b88cf1d03 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-11 15:54:25 +01:00
Jakob Borg
ae4cc94a9d lib/model: Fix locking order in Availability() (fixes #3634)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3714
2016-11-08 06:38:50 +00:00
Jakob Borg
3f9b75b7b3 Revert "lib/model: Introducer can remove stuff it introduced (fixes #1015)"
This reverts commit ec2b097313.
2016-11-08 14:27:32 +08:00
Audrius Butkevicius
ec2b097313 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-08 00:40:48 +08:00
Audrius Butkevicius
7fba8cf759 lib/sync: Print all lockers, add holder to RWMutex 2016-10-30 00:17:25 +01:00
Jakob Borg
0296c23685 lib/protocol: Use DeviceID in protocol messages, with custom marshalling
This makes the device ID a real type that can be used in the protobuf
schema. That avoids the juggling back and forth from []byte in a bunch
of places and simplifies the code.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3695
2016-10-29 21:56:24 +00:00
MikeLund
74dd051d51 all: Update docs.s.n links to use https
Skip-check: authors

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3691
2016-10-27 17:02:19 +00:00
Audrius Butkevicius
815588daba lib/sync, lib/model: Capture locker routine ID, print locker details on deadlock 2016-10-18 21:00:01 +01:00
Jakob Borg
4e8c8d7e2c cmd/syncthing, lib/db, lib/model: Track more detailed file/dirs/links/deleted counts 2016-10-17 23:57:43 +02:00
Jakob Borg
b8a90b7eaa lib/model: Remove chatty delta index confirmation
This had its moment when making sure it worked initially, but nowadays
there is not point discussing the obvious on every folder on every
connect.
2016-10-17 09:21:58 +02:00
Nathan Morrison
d322ebd0b9 Add API service for local disk changes
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3626
LGTM: calmh, AudriusButkevicius
2016-09-28 15:54:13 +00:00
Jakob Borg
da0b7cc7f2 lib/model: Correct lock taking order in ConnectionStats (fixes #3596)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3597
2016-09-14 19:38:55 +00:00
Jakob Borg
46a143e80e lib/model: Handle deleted-then-ignored files (fixes #3502)
When files that were previously marked as deleted became ignored, we
used to do nothing at all. This changes that behavior to set the Invalid
bit (that we should rename to Ignored). This then becomes an update to
other devices that they should not trust our knowledge about the file in
question.

Read this diff without whitespace...

Tested by
- creating a bunch of files on s1
- letting them sync to s2
- shutting down s2
- deleting the files on s1 and rescanning
- adding the files to .stignore on s1 and rescanning
- starting up s2 and letting it sync
- observing the files are not deleted on s2, and it considers itself up
  to date.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3557
2016-09-02 13:23:24 +00:00