When files that were previously marked as deleted became ignored, we
used to do nothing at all. This changes that behavior to set the Invalid
bit (that we should rename to Ignored). This then becomes an update to
other devices that they should not trust our knowledge about the file in
question.
Read this diff without whitespace...
Tested by
- creating a bunch of files on s1
- letting them sync to s2
- shutting down s2
- deleting the files on s1 and rescanning
- adding the files to .stignore on s1 and rescanning
- starting up s2 and letting it sync
- observing the files are not deleted on s2, and it considers itself up
to date.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3557
We used to consider deleted files & directories 128 bytes large. After
the delta indexes change a bug slipped in where deleted files would be
weighted according to their old non-deleted size. Both ways are
incorrect (but the latest change made it worse), as if there are more
files deleted than remaining data in the repo the needSize can be
greater than the globalSize, resulting in a negative completion
percentage.
This change makes it so that deleted items are zero bytes large, which
makes more sense. Instead we expose the number of files that we need to
delete as a separate field in the Completion() result, and hack the
percentage down to 95% complete if it was 100% complete but we need to
delete files. This latter part is sort of ugly, but necessary to give
the user some sort of feedback.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3556
So there were some issues here. The main problem was that
model.Close(deviceID) was overloaded to mean "the connection was closed
by the protocol layer" and "i want to close this connection". That meant
it could get called twice - once *to* close the connection and then once
more when the connection *was* closed.
After this refactor there is instead a Closed(conn) method that is the
callback. I didn't need to change the parameter in the end, but I think
it's clearer what it means when it takes the connection that was closed
instead of a device ID. To close a connection, the new close(deviceID)
method is used instead, which only closes the underlying connection and
leaves the cleanup to the Closed() callback.
I also changed how we do connection switching. Instead of the connection
service calling close and then adding the connection, it just adds the
new connection. The model knows that it already has a connection and
makes sure to close and clean out that one before adding the new
connection.
To make sure to sequence this properly I added a new map of channels
that get created on connection add and closed by Closed(), so that
AddConnection() can do the close and wait for the cleanup to happen
before proceeding.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3490
Furthermore:
1. Cleans configs received, migrates them as we receive them.
2. Clears indexes of devices we no longer share the folder with
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3478
This adds a new nanoseconds field to the FileInfo, populates it during
scans and sets the non-truncated time in Chtimes calls.
The actual file modification time is defined as modified_s seconds +
modified_ns nanoseconds. It's expected that the modified_ns field is <=
1e9 (that is, all whole seconds should go in the modified_s field) but
not really enforced. Given that it's an int32 the timestamp can be
adjusted += ~2.9 seconds by the modified_ns field...
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3431
This changes the BEP protocol to use protocol buffer serialization
instead of XDR, and therefore also the database format. The local
discovery protocol is also updated to be protocol buffer format.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3276
LGTM: AudriusButkevicius
This contains the following behavioral changes:
- Duplicate folder IDs is now fatal during startup
- Invalid folder flags in the ClusterConfig is fatal for the connection
(this will go away soon with the proto changes, as we won't have any
unknown flags any more then)
- Empty path is a folder error reported at runtime
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3370
While attempting to fix#2782 I thought the problem was the
CheckFolderHealth method, so I cleaned it up. That turned out not to be
the case, but I think this is better anyhow.
It also moves the "create folder and marker if the folder was empty in
the index" code to StartFolder where I think it makes better sense.
This is covered by a number of existing tests.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3343
This adds a metric for "committed items" to the database instance that I
use in the test code, and a couple of tests that ensure that scans that
don't change anything also don't commit anything.
There was a case in the scanner where we set the invalid bit on files
that are ignored, even though they were already ignored and had the
invalid bit set. I had assumed this would result in an extra database
commit, but it was in fact filtered out by the Set... Anyway, I think we
can save some work on not pushing that change to the Set at all.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3298
This is in preparation for future changes, but also improves the
handling when talking to pre-v0.13 clients. It breaks out the Hello
message and magic from the rest of the protocol implementation, with the
intention that this small part of the protocol will survive future
changes.
To enable this, and future testing, the new ExchangeHello function takes
an interface that can be implemented by future Hello versions and
returns a version indendent result type. It correctly detects pre-v0.13
protocols and returns a "too old" error message which gets logged to the
user at warning level:
[I6KAH] 09:21:36 WARNING: Connecting to [...]:
the remote device speaks an older version of the protocol (v0.12) not
compatible with this version
Conversely, something entirely unknown will generate:
[I6KAH] 09:40:27 WARNING: Connecting to [...]:
the remote device speaks an unknown (newer?) version of the protocol
The intention is that in future iterations the Hello exchange will
succeed on at least one side and ExchangeHello will return the actual
data from the Hello together with ErrTooOld and an even more precise
message can be generated.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3289
Without this the summary service doesn't know to recalculate completion
percentage for remote devices when DownloadProgress messages come in.
That means that completion percentage isn't updated in the GUI while
transfers of large files are ongoing. With this change, it updates
correctly.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3144
I think this better reflects what it means. Also tweaks the verbose
format to be more like our other things and lightly refactors the code
to not have the boolean and include the folder in the event.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3121
The old usage pattern was to create a Walker with a bunch of attributes,
then call Walk() on it and nothing else. This extracts the attributes
into a Config struct and exposes a Walk(cfg Config) method instead, as
there was no reason to expose the state-holding walker type.
Also creates a few no-op implementations of the necessary interfaces
so that we can skip nil checks and simiplify things here and there.
Definitely look at this diff without whitespace.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3060
The VersioningConfig change is because it defaults to nil but gets
deserialized to map[string]string{}. Now prepare() enforces a single
representation of the empty map.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3065
1. Removes separate relay lists and relay clients/services, just makes it a listen address
2. Easier plugging-in of other transports
3. Allows "hot" disabling and enabling NAT services
4. Allows "hot" listen address changes
5. Changes listen address list with a preferable "default" value just like for discovery
6. Debounces global discovery announcements as external addresses change (which it might alot upon starting)
7. Stops this whole "pick other peers relay by latency". This information is no longer available,
but I don't think it matters as most of the time other peer only has one relay.
8. Rename ListenAddress to ListenAddresses, as well as in javascript land.
9. Stop serializing deprecated values to JSON
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/2982
Previously the code failed in that it would return top-level plus a sub,
i.e. ["", "foo"], and it would consider "usr/lib" a prefix of
"usr/libexec" which it is not.
Fixes#2151.
Since Walk.walkAndHashFiles ignores .stfolder and .stignore, they will
never be found by fs.Get(protocol.LocalDeviceID, sub) in
Model.internalScanFolder. As a result, when asked to scan those subs
we end up scanning the whole folder.
This reverts the change introduced in 9b9fe0d Reduce scanning effort.
That commit caused us to automatically ignore the basename of the
specified subs and instead scan closest known root folder. For
example, in a folder that looks like:
Sync/
├── 00
│ ├── one
│ ├── three
│ └── two
├── 01
│ ├── one
│ ├── three
│ └── two
├── 02
│ ├── one
│ ├── three
│ └── two
└── one
calling '/rest/db/scan?folder=default&sub=01' called filepath.Walk on
the whole Sync/ folder instead of just the desired subfolder. This
contradicts the scan behavior promised by the documentation.
This is related to #2151.
We're going to need the db.Instance to keep some state, and for that to
work we need the same one passed around everywhere. Hence this moves the
leveldb-specific file opening stuff into the db package and exports the
dbInstance type.
Overwriting configuration files is likely to happen if a
user syncs their home directories across computers. In this
case, the biggest risk is that all nodes will end up with
the same certificate and thus Device ID.
When the model prepares a folder for syncing, it checks to
see if the configuration files this instance is using are
getting synced. If the are getting synced, and they aren't
getting ignored, a warning is emitted. The model is used
so that when a new folder is added dynamically, a warning
is also emitted.
This will not prevent a user from shooting themselves in
the foot, and will not cover all cases (e.g. symlinks).
It should provide _something_ for many users in this
situation to go on, though.
This implements a new debug/trace infrastructure based on a slightly
hacked up logger. Instead of the traditional "if debug { ... }" I've
rewritten the logger to have no-op Debugln and Debugf, unless debugging
has been enabled for a given "facility". The "facility" is just a
string, typically a package name.
This will be slightly slower than before; but not that much as it's
mostly a function call that returns immediately. For the cases where it
matters (the Debugln takes a hex.Dump() of something for example, and
it's not in a very occasional "if err != nil" branch) there is an
l.ShouldDebug(facility) that is fast enough to be used like the old "if
debug".
The point of all this is that we can now toggle debugging for the
various packages on and off at runtime. There's a new method
/rest/system/debug that can be POSTed a set of facilities to enable and
disable debug for, or GET from to get a list of facilities with
descriptions and their current debug status.
Similarly a /rest/system/log?since=... can grab the latest log entries,
up to 250 of them (hardcoded constant in main.go) plus the initial few.
Not implemented in this commit (but planned) is a simple debug GUI
available on /debug that shows the current log in an easily pasteable
format and has checkboxes to enable the various debug facilities.
The debug instructions to a user then becomes "visit this URL, check
these boxes, reproduce your problem, copy and paste the log". The actual
log viewer on the hypothetical /debug URL can poll regularly for new log
entries and this bypass the 250 line limit.
The existing STTRACE=foo variable is still obeyed and just sets the
start state of the system.
An error on opening .stignore will satisfy os.IsNotExist() and not be
reported. Other errors will be reported and stop the folder, including
is-not-exist errors from #include as these are passed through fmt.Errorf.
Also fixes minor issue where we would not print cause of folder stopping
to the log.
Also fixes minor issue with capitalization of errors.
