.\" Man page generated from reStructuredText. . .TH "STDISCOSRV" "1" "November 18, 2017" "v0.14" "Syncthing" .SH NAME stdiscosrv \- Syncthing Discovery Server . .nr rst2man-indent-level 0 . .de1 rstReportMargin \\$1 \\n[an-margin] level \\n[rst2man-indent-level] level margin: \\n[rst2man-indent\\n[rst2man-indent-level]] - \\n[rst2man-indent0] \\n[rst2man-indent1] \\n[rst2man-indent2] .. .de1 INDENT .\" .rstReportMargin pre: . RS \\$1 . nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin] . nr rst2man-indent-level +1 .\" .rstReportMargin post: .. .de UNINDENT . RE .\" indent \\n[an-margin] .\" old: \\n[rst2man-indent\\n[rst2man-indent-level]] .nr rst2man-indent-level -1 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]] .in \\n[rst2man-indent\\n[rst2man-indent-level]]u .. .SH SYNOPSIS .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C stdiscosrv [\-cert=] [\-db\-backend=] [\-db\-dsn=] [\-debug] [\-http] [\-key=] [\-limit\-avg=] [\-limit\-burst=] [\-limit\-cache=] [\-listen=
] [\-stats\-file=] .ft P .fi .UNINDENT .UNINDENT .SH DESCRIPTION .sp Syncthing relies on a discovery server to find peers on the internet. Anyone can run a discovery server and point Syncthing installations to it. .SH OPTIONS .INDENT 0.0 .TP .B \-cert= Certificate file (default "cert.pem"). .UNINDENT .INDENT 0.0 .TP .B \-db\-backend= Database backend to use (default "ql"). .UNINDENT .INDENT 0.0 .TP .B \-db\-dsn= Database DSN (default "memory://stdiscosrv"). .UNINDENT .INDENT 0.0 .TP .B \-debug Enable debug output. .UNINDENT .INDENT 0.0 .TP .B \-http Listen on HTTP (behind an HTTPS proxy). .UNINDENT .INDENT 0.0 .TP .B \-key= Key file (default "key.pem"). .UNINDENT .INDENT 0.0 .TP .B \-limit\-avg= Allowed average package rate, per 10 s (default 5). .UNINDENT .INDENT 0.0 .TP .B \-limit\-burst= Allowed burst size, packets (default 20). .UNINDENT .INDENT 0.0 .TP .B \-limit\-cache= Limiter cache entries (default 10240). .UNINDENT .INDENT 0.0 .TP .B \-listen=
Listen address (default ":8443"). .UNINDENT .INDENT 0.0 .TP .B \-stats\-file= File to write periodic operation stats to. .UNINDENT .SH POINTING SYNCTHING AT YOUR DISCOVERY SERVER .sp By default, Syncthing uses a number of global discovery servers, signified by the entry \fBdefault\fP in the list of discovery servers. To make Syncthing use your own instance of stdiscosrv, open up Syncthing\(aqs web GUI. Go to settings, Global Discovery Server and add stdiscosrv\(aqs host address to the comma\-separated list, e.g. \fBhttps://disco.example.com:8443/v2/\fP\&. Note that stdiscosrv uses port 8443 by default. For stdiscosrv to be available over the internet with a dynamic IP address, you will need a dynamic DNS service. .sp If you wish to use \fIonly\fP your own discovery server, remove the \fBdefault\fP entry from the list. .SH SETTING UP .SS Description .sp This guide assumes that you have already set up Syncthing. If you haven\(aqt yet, head over to getting\-started first. .SS Installing .sp Go to \fI\%releases\fP <\fBhttps://build.syncthing.net/job/stdiscosrv\fP> and download the file appropriate for your operating system. Unpacking it will yield a binary called \fBstdiscosrv\fP (or \fBstdiscosrv.exe\fP on Windows). Start this in whatever way you are most comfortable with; double clicking should work in any graphical environment. At first start, stdiscosrv will generate the directory \fB/var/stdiscosrv\fP (\fBX:\evar\estdiscosrv\fP on Windows, where X is the partition \fBstdiscosrv.exe\fP is executed from) with configuration. If the user running \fBstdiscosrv\fP doesn\(aqt have permission to do so, create the directory and set the owner appropriately or use the command line switches (see below) to select a different location. .SS Configuring .sp \fBNOTE:\fP .INDENT 0.0 .INDENT 3.5 If you are running an instance of Syncthing on the discovery server, you must either add that instance to other devices using a static address or bind the discovery server and Syncthing instances to different IP addresses. .UNINDENT .UNINDENT .SS Certificates .sp The discovery server provides service over HTTPS. To ensure secure connections from clients there are three options: .INDENT 0.0 .IP \(bu 2 Use a CA\-signed certificate pair for the domain name you will use for the discovery server. This is like any other HTTPS website; clients will authenticate the server based on it\(aqs certificate and domain name. .IP \(bu 2 Use any certificate pair and let clients authenticate the server based on it\(aqs "device ID" (similar to Syncthing\-to\-Syncthing authentication). In this case, using \fBsyncthing \-generate\fP is a good option to create a certificate pair. .IP \(bu 2 Pass the \fB\-http\fP flag if the discovery server is behind an SSL\-secured reverse proxy. See below for configuration. .UNINDENT .sp For the first two options, the discovery server must be given the paths to the certificate and key at startup. This isn\(aqt necessary with the \fBhttp\fP flag: .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C $ stdiscosrv \-cert /path/to/cert.pem \-key /path/to/key.pem Server device ID is 7DDRT7J\-UICR4PM\-PBIZYL3\-MZOJ7X7\-EX56JP6\-IK6HHMW\-S7EK32W\-G3EUPQA .ft P .fi .UNINDENT .UNINDENT .sp The discovery server prints it\(aqs device ID at startup. In the case where you are using a non CA signed certificate, this device ID (fingerprint) must be given to the clients in the discovery server URL: .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C https://disco.example.com:8443/v2/?id=7DDRT7J\-UICR4PM\-PBIZYL3\-MZOJ7X7\-EX56JP6\-IK6HHMW\-S7EK32W\-G3EUPQA .ft P .fi .UNINDENT .UNINDENT .sp Otherwise, the URL (note the trailing slash after the \fBv2\fP) will be: .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C https://disco.example.com:8443/v2/ .ft P .fi .UNINDENT .UNINDENT .SS Reverse Proxy Setup .sp The discovery server can be run behind an SSL\-secured reverse proxy. This allows: .INDENT 0.0 .IP \(bu 2 Use of a subdomain name without requiring a port number added to the URL .IP \(bu 2 Sharing an SSL certificate with multiple services on the same server .UNINDENT .SS Requirements .INDENT 0.0 .IP \(bu 2 Run the discovery server using the \-http flag \fBstdiscosrv \-http\fP\&. .IP \(bu 2 SSL certificate/key configured for the reverse proxy .IP \(bu 2 The "X\-Forwarded\-For" http header must be passed through with the client\(aqs real IP address .IP \(bu 2 The "X\-SSL\-Cert" must be passed through with the PEM\-encoded client SSL certificate .IP \(bu 2 The proxy must request the client SSL certificate but not require it to be signed by a trusted CA. .UNINDENT .SS Nginx .sp These three lines in the configuration take care of the last three requirements listed above: .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C proxy_set_header X\-Forwarded\-For $proxy_add_x_forwarded_for; proxy_set_header X\-SSL\-Cert $ssl_client_cert; ssl_verify_client optional_no_ca; .ft P .fi .UNINDENT .UNINDENT .sp The following is a complete example Nginx configuration file. With this setup, clients can use \fI\%https://discovery.example.com\fP as the discovery server URL in the Syncthing settings. .INDENT 0.0 .INDENT 3.5 .sp .nf .ft C # HTTP 1.1 support proxy_http_version 1.1; proxy_buffering off; proxy_set_header Host $http_host; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $proxy_connection; proxy_set_header X\-Real\-IP $remote_addr; proxy_set_header X\-Forwarded\-For $proxy_add_x_forwarded_for; proxy_set_header X\-Forwarded\-Proto $proxy_x_forwarded_proto; proxy_set_header X\-SSL\-Cert $ssl_client_cert; upstream discovery.example.com { # Local IP address:port for discovery server server 192.0.2.1:8443; } server { server_name discovery.example.com; listen 80; access_log /var/log/nginx/access.log vhost; return 301 https://$host$request_uri; } server { server_name discovery.example.com; listen 443 ssl http2; access_log /var/log/nginx/access.log vhost; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers ECDHE\-RSA\-AES128\-GCM\-SHA256:ECDHE\-ECDSA\-AES128\-GCM\-SHA256:ECDHE\-RSA\-AES256\-GCM\-SHA384:ECDHE\-ECDSA\-AES256\-GCM\-SHA384: DHE\-RSA\-AES128\-GCM\-SHA256:DHE\-DSS\-AES128\-GCM\-SHA256:kEDH+AESGCM:ECDHE\-RSA\-AES128\-SHA256:ECDHE\-ECDSA\-AES128\-SHA256:ECDHE\-RSA\-AES128\-SHA:E CDHE\-ECDSA\-AES128\-SHA:ECDHE\-RSA\-AES256\-SHA384:ECDHE\-ECDSA\-AES256\-SHA384:ECDHE\-RSA\-AES256\-SHA:ECDHE\-ECDSA\-AES256\-SHA:DHE\-RSA\-AES128\-SHA25 6:DHE\-RSA\-AES128\-SHA:DHE\-DSS\-AES128\-SHA256:DHE\-RSA\-AES256\-SHA256:DHE\-DSS\-AES256\-SHA:DHE\-RSA\-AES256\-SHA:AES128\-GCM\-SHA256:AES256\-GCM\-SHA3 84:AES128\-SHA256:AES256\-SHA256:AES128\-SHA:AES256\-SHA:AES:CAMELLIA:DES\-CBC3\-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH\-DSS \-DES\-CBC3\-SHA:!EDH\-RSA\-DES\-CBC3\-SHA:!KRB5\-DES\-CBC3\-SHA; ssl_prefer_server_ciphers on; ssl_session_timeout 5m; ssl_session_cache shared:SSL:50m; ssl_certificate /etc/nginx/certs/discovery.example.com.crt; ssl_certificate_key /etc/nginx/certs/discovery.example.com.key; ssl_dhparam /etc/nginx/certs/discovery.example.com.dhparam.pem; add_header Strict\-Transport\-Security "max\-age=31536000"; ssl_verify_client optional_no_ca; location / { proxy_pass http://discovery.example.com; } } .ft P .fi .UNINDENT .UNINDENT .sp An example of automating the SSL certificates and reverse\-proxying the Discovery Server and Syncthing using Nginx, \fI\%Let\(aqs Encrypt\fP <\fBhttps://letsencrypt.org/\fP> and Docker can be found \fI\%here\fP <\fBhttps://forum.syncthing.net/t/docker-syncthing-and-syncthing-discovery-behind-nginx-reverse-proxy-with-lets-encrypt/6880\fP>\&. .SH SEE ALSO .sp \fIsyncthing\-networking(7)\fP, \fIsyncthing\-faq(7)\fP .SH AUTHOR The Syncthing Authors .SH COPYRIGHT 2015, The Syncthing Authors .\" Generated by docutils manpage writer. .