syncthing/gui/default/assets/lang/lang-ar.json

{
    "A device with that ID is already added.": "تم أضافه عنوان هذا الجهاز من قبل.",
    "A negative number of days doesn't make sense.": "لا يمكن استخدام قيمة سالبة لعدد الأيام.",
    "A new major version may not be compatible with previous versions.": "الإصدار الجديد قد لا يتوافق مع الإصدارات السابقة.",
    "API Key": "مفتاح API",
    "About": "عن",
    "Action": "اجراء",
    "Actions": "الإجراءات",
    "Active filter rules": "Active filter rules",
    "Add": "إضافة",
    "Add Device": "إضافة جهاز",
    "Add Folder": "إضافة مجلد",
    "Add Remote Device": "أضافه جهاز بعيد",
    "Add devices from the introducer to our device list, for mutually shared folders.": "اضف أجهزة من المعرف/المقدم إلى قائمة الأجهزة الخاصة بنا، للمجلدات المشتركة بشكل متبادل. ",
    "Add filter entry": "Add filter entry",
    "Add ignore patterns": "Add ignore patterns",
    "Add new folder?": "إضافة مجلد جديد؟",
    "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "بالإضافة إلى ذلك ، سيتم زيادة الفاصل الزمني لإعادة الفحص الكامل (60 مرة، وهو الافتراضي الجديد من 1H). يمكنك أيضًا التحكم بالإعدادات وتعديلها يدويًا لكل مجلد لاحقًا بعد اختيار \"لا\".",
    "Address": "العنوان",
    "Addresses": "العناوين",
    "Advanced": "متقدم",
    "Advanced Configuration": "ضبط متقدم",
    "All Data": "كل المعلومات",
    "All Time": "All Time",
    "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.",
    "Allow Anonymous Usage Reporting?": "السماح بإرسال تقارير الإستخدام المجهولة؟",
    "Allowed Networks": "الشبكات المسموح بها",
    "Alphabetic": "أبجدية",
    "Altered by ignoring deletes.": "Altered by ignoring deletes.",
    "An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.": "الإصدار يتم معالجته بواسطة أمر خارجي. يجب إزالة الملف من المجلدات المشتركة. إذا كان المسار للتطبيق يحتوي على مسافات، يجب وضعها بين علامتي تنصيص دلالة على الاقتباس.",
    "Anonymous Usage Reporting": "تقارير الإستخدام المجهولة",
    "Anonymous usage report format has changed. Would you like to move to the new format?": "هل تريد الانتقال الى التصميم الجديد لتقرير الاستخدام المجهول ؟",
    "Apply": "Apply",
    "Are you sure you want to override all remote changes?": "Are you sure you want to override all remote changes?",
    "Are you sure you want to permanently delete all these files?": "Are you sure you want to permanently delete all these files?",
    "Are you sure you want to remove device {%name%}?": " هل انت متاكد من حذف الجهاز {{name}}? ",
    "Are you sure you want to remove folder {%label%}?": "هل انت متاكد من حذف المجلد {{label}}؟",
    "Are you sure you want to restore {%count%} files?": "هل انت متاكد من استعادة {{count}} ملف؟",
    "Are you sure you want to revert all local changes?": "Are you sure you want to revert all local changes?",
    "Are you sure you want to upgrade?": "Are you sure you want to upgrade?",
    "Authors": "Authors",
    "Auto Accept": "القبول تلقائيا",
    "Automatic Crash Reporting": "التبليغ التلقائي للاخطاء",
    "Automatic upgrade now offers the choice between stable releases and release candidates.": "توفر الترقية التلقائية الاختيار بين النسخ الثابتة أو النسخ المرشحة.",
    "Automatic upgrades": "تحديث تلقائي",
    "Automatic upgrades are always enabled for candidate releases.": "الترقية التلقائية مفعلة دائمًا للنسخ المرشحة. ",
    "Automatically create or share folders that this device advertises at the default path.": "تلقائيا أنشئ وشارك المجلدات الموجودة في المسار الافتراضي.",
    "Available debug logging facilities:": "خدمات سجلات تدقيق البرمجيات المتوفرة:",
    "Be careful!": "احذر!",
    "Body:": "Body:",
    "Bugs": "أخطاء برمجية",
    "Cancel": "Cancel",
    "Changelog": "سجل التغيير",
    "Clean out after": "نظف بعد",
    "Cleaning Versions": "Cleaning Versions",
    "Cleanup Interval": "Cleanup Interval",
    "Click to see full identification string and QR code.": "Click to see full identification string and QR code.",
    "Close": "أغلق",
    "Command": "أمر",
    "Comment, when used at the start of a line": "التعليق، عندما تستخدم في بداية خط",
    "Compression": "ضغط",
    "Configuration Directory": "Configuration Directory",
    "Configuration File": "Configuration File",
    "Configured": "تكوين",
    "Connected (Unused)": "Connected (Unused)",
    "Connection Error": "خطأ في الإتصال",
    "Connection Type": "نوع الاتصال",
    "Connections": "اتصالات",
    "Connections via relays might be rate limited by the relay": "Connections via relays might be rate limited by the relay",
    "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "مراقبة الملفات بشكل مستمر متوفر في Syncthing. يتم فحص الملفات التي تم تغييرها في المسار فقط. هذا يساعد على تجنب فحص كامل المسار لأداء اسرع. ",
    "Copied from elsewhere": "منسوخ من مكان أخر",
    "Copied from original": "منسوخ من الأصل",
    "Copied!": "Copied!",
    "Copy": "Copy",
    "Copy failed! Try to select and copy manually.": "Copy failed! Try to select and copy manually.",
    "Currently Shared With Devices": "Currently Shared With Devices",
    "Custom Range": "Custom Range",
    "Danger!": "خطر!",
    "Database Location": "Database Location",
    "Debugging Facilities": "خدمات تدقيق البرمجيات",
    "Default": "Default",
    "Default Configuration": "Default Configuration",
    "Default Device": "Default Device",
    "Default Folder": "Default Folder",
    "Default Ignore Patterns": "Default Ignore Patterns",
    "Defaults": "Defaults",
    "Delete": "حذف",
    "Delete Unexpected Items": "Delete Unexpected Items",
    "Deleted {%file%}": "Deleted {{file}}",
    "Deselect All": "الغاء تحديد الكل",
    "Deselect devices to stop sharing this folder with.": "Deselect devices to stop sharing this folder with.",
    "Deselect folders to stop sharing with this device.": "Deselect folders to stop sharing with this device.",
    "Device": "جهاز",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "الجهاز \"{{الاسم}}\" ({{الجهاز}} في {{العنوان}}) يرغب في الاتصال، إضافة جهاز جديد؟",
    "Device Certificate": "Device Certificate",
    "Device ID": "هوية الجهاز",
    "Device Identification": "هوية الجهاز",
    "Device Name": "أسم الجهاز",
    "Device is untrusted, enter encryption password": "Device is untrusted, enter encryption password",
    "Device rate limits": "حدود معدل نقل البيانات",
    "Device that last modified the item": "اخر جهاز جهاز عدل على العنصر",
    "Devices": "الأجهزة",
    "Disable Crash Reporting": "تعطيل ميزة التبليغ عن الأخطاء",
    "Disabled": "معطل",
    "Disabled periodic scanning and disabled watching for changes": "تعطيل المسح الدوري ومشاهدة التغييرات",
    "Disabled periodic scanning and enabled watching for changes": "تعطيل المسح الدوري وتفعيل مشاهدة التغييرات",
    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "تعطيل المسح الدوري وفشل إعداد مشاهدة التغييرات، إعادة المحاولة كل 1 دقيقة:",
    "Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).": "Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).",
    "Discard": "تجاهل",
    "Disconnected": "غير متصل",
    "Disconnected (Inactive)": "Disconnected (Inactive)",
    "Disconnected (Unused)": "Disconnected (Unused)",
    "Discovered": "مكتشفة",
    "Discovery": "اكتشاف",
    "Discovery Failures": "فشل الاكتشاف",
    "Discovery Status": "Discovery Status",
    "Dismiss": "Dismiss",
    "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
    "Do not restore": "الغاء الاستعادة",
    "Do not restore all": "الغاء استعادة الكل",
    "Do you want to enable watching for changes for all your folders?": "هل تريد تفعيل مراقبة التغيرات على كل المجلدات؟",
    "Documentation": "المستندات",
    "Download Rate": "معدل التحميل",
    "Downloaded": "جاري التحميل",
    "Downloading": "جاري التحميل",
    "Edit": "تعديل",
    "Edit Device": "تعديل الجهاز",
    "Edit Device Defaults": "Edit Device Defaults",
    "Edit Folder": "تعديل المجلد",
    "Edit Folder Defaults": "Edit Folder Defaults",
    "Editing {%path%}.": "تعديل {{path}}.",
    "Enable Crash Reporting": "تفعيل التبليغ عن الاخطاء",
    "Enable NAT traversal": "تفعيل اجتياز النات",
    "Enable Relaying": "تفعيل الترحيل",
    "Enabled": "مفعل",
    "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.": "Enables sending extended attributes to other devices, and applying incoming extended attributes. May require running with elevated privileges.",
    "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.": "Enables sending extended attributes to other devices, but not applying incoming extended attributes. This can have a significant performance impact. Always enabled when \"Sync Extended Attributes\" is enabled.",
    "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.": "Enables sending ownership information to other devices, and applying incoming ownership information. Typically requires running with elevated privileges.",
    "Enables sending ownership information to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.": "Enables sending ownership information to other devices, but not applying incoming ownership information. This can have a significant performance impact. Always enabled when \"Sync Ownership\" is enabled.",
    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "أدخل رقمًا غير سالب (مثلًا، \"2.35\") واختر وحدة. النسب المئوية هي جزء من إجمالي حجم القرص.",
    "Enter a non-privileged port number (1024 - 65535).": "ادخل رقم منفذ غير مقيد (1024 - 65535).",
    "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "أدخل فواصل لكي تفصل بين العناوين (\"tcp://ip:port\", \"tcp://host:port\") أو \"العناوين الديناميكية\" للاكتشاف التلقائي للعنوان.",
    "Enter ignore patterns, one per line.": "ادخل نمط التجاهل، كل نمط في سطر.",
    "Enter up to three octal digits.": "Enter up to three octal digits.",
    "Error": "خطأ",
    "Extended Attributes": "Extended Attributes",
    "Extended Attributes Filter": "Extended Attributes Filter",
    "External": "External",
    "External File Versioning": "إصدار الملف الخارجي",
    "Failed Items": "العناصر الفاشلة",
    "Failed to load file versions.": "Failed to load file versions.",
    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
    "Failed to setup, retrying": "فشل الأعداد، جاري المحاولة مره اخرى",
    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "من المتوقع فشل الاتصال بخوادم IPv6 إذا لم يكن هناك اتصال IPv6.",
    "File Pull Order": "ترتيب ملف السحب",
    "File Versioning": "ملف الإصدارات",
    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "الملفات يتم نقلها إلى دليل .stversions عند الاستبدال أو الحذف بواسطة البرنامج.",
    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "يتم نقل الملفات إلى الإصدارات المؤرخة المختومة في دليل .vversions عند استبدالها أو حذفها بواسطة Syncthing.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "الملفات محمية من التغييرات التي تم إجراؤها على الأجهزة الأخرى ، ولكن سيتم إرسال التغييرات التي تم إجراؤها على هذا الجهاز إلى بقية الأجهزة.",
    "Files are synchronized from the cluster, but any changes made locally will not be sent to other devices.": "Files are synchronized from the cluster, but any changes made locally will not be sent to other devices.",
    "Filesystem Watcher Errors": "أخطاء مراقب نظام الملفات",
    "Filter by date": "فلتره بالتاريخ ",
    "Filter by name": "فلتر باستخدام الاسم",
    "Folder": "مجلد",
    "Folder ID": "هوية المجلد",
    "Folder Label": "تسمية المجلد",
    "Folder Path": "مسار المجلد",
    "Folder Type": "نوع المجلد",
    "Folder type \"{%receiveEncrypted%}\" can only be set when adding a new folder.": "Folder type \"{{receiveEncrypted}}\" can only be set when adding a new folder.",
    "Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.": "Folder type \"{{receiveEncrypted}}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.",
    "Folders": "المجلدات",
    "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.": "للمجلدات التالية، حدث خطأ قبل بدء مشاهدة التغييرات. ستتم إعادة المحاولة كل دقيقة، نظرًا لذلك قد تختفي الأخطاء قريبًا. لكن إذا استمرت، فحاول حل المشكلة واطلب المساعدة إذا لم تستطع حل المشكلة.",
    "Forever": "Forever",
    "Full Rescan Interval (s)": "مدة أعاده الفحص الكامل (ثانية)",
    "GUI": "واجهة المستخدم الرسومية",
    "GUI / API HTTPS Certificate": "GUI / API HTTPS Certificate",
    "GUI Authentication Password": "كلمة السر  ",
    "GUI Authentication User": "أسم المستخدم لدخول واجهة الرسومية",
    "GUI Authentication: Set User and Password": "GUI Authentication: Set User and Password",
    "GUI Listen Address": "واجهة الرسومية  الاستماع الى العنوان",
    "GUI Override Directory": "GUI Override Directory",
    "GUI Theme": "شكل الواجه",
    "General": "عام",
    "Generate": "توليد",
    "Global Discovery": "الاكتشاف العالمي",
    "Global Discovery Servers": "الاكتشاف العالمي",
    "Global State": "الحالة العامة ",
    "Help": "مساعدة",
    "Hint: only deny-rules detected while the default is deny. Consider adding \"permit any\" as last rule.": "Hint: only deny-rules detected while the default is deny. Consider adding \"permit any\" as last rule.",
    "Home page": "الصفحة الرئيسية",
    "However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.": "ومع ذلك، تشير إعداداتك الحالية إلى أنك قد لا ترغب في تمكينه. لذلك تم تعطيل الإبلاغ التلقائي عن الأعطال.",
    "Identification": "Identification",
    "If untrusted, enter encryption password": "If untrusted, enter encryption password",
    "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.": "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.",
    "Ignore": "تجاهل",
    "Ignore Patterns": "تجاهل الأنماط",
    "Ignore Permissions": "تجاهل الصلاحيات",
    "Ignore patterns can only be added after the folder is created. If checked, an input field to enter ignore patterns will be presented after saving.": "Ignore patterns can only be added after the folder is created. If checked, an input field to enter ignore patterns will be presented after saving.",
    "Ignored Devices": "الأجهزة المتجاهلة",
    "Ignored Folders": "المجلدات المتجاهلة",
    "Ignored at": "تجاهل عند",
    "Included Software": "Included Software",
    "Incoming Rate Limit (KiB/s)": "الحد الأقصى البيانات الواردة  (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "الإعدادات الغير صحيحه قد تدمر بيانات المجلد وتجعل المزامنة غير صالحه للعمل",
    "Internally used paths:": "Internally used paths:",
    "Introduced By": "عرف بواسطة",
    "Introducer": "المعرف",
    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
    "Keep Versions": "احتفظ بالاصدارات",
    "LDAP": "LDAP",
    "Largest First": "الأكبر أولا",
    "Last 30 Days": "Last 30 Days",
    "Last 7 Days": "Last 7 Days",
    "Last Month": "Last Month",
    "Last Scan": "اخر فحص",
    "Last seen": "اخر ظهور",
    "Latest Change": "اخر التغييرات",
    "Learn more": "اعرف اكثر ",
    "Learn more at {%url%}": "Learn more at {{url}}",
    "Limit": "الحد",
    "Listener Failures": "Listener Failures",
    "Listener Status": "Listener Status",
    "Listeners": "المستمعين",
    "Loading data...": "تحميل بيانات...",
    "Loading...": "تحميل...",
    "Local Additions": "Local Additions",
    "Local Discovery": "الاكتشاف المحلي",
    "Local State": "الحالة المحلية",
    "Local State (Total)": "الحالة المحلية (مجموع)",
    "Locally Changed Items": "العناصر المتغيرة محليا",
    "Log": "سجل",
    "Log File": "Log File",
    "Log tailing paused. Scroll to the bottom to continue.": "Log tailing paused. Scroll to the bottom to continue.",
    "Logs": "سجلات",
    "Major Upgrade": "ترقية أساسية",
    "Mass actions": "Mass actions",
    "Maximum Age": "أقصى مدة",
    "Maximum single entry size": "Maximum single entry size",
    "Maximum total size": "Maximum total size",
    "Metadata Only": "البيانات الوصفية فقط",
    "Minimum Free Disk Space": "أدنى حد لمساحة التخزين الحرة",
    "Mod. Device": "Mod. Device",
    "Mod. Time": "Mod. Time",
    "More than a month ago": "More than a month ago",
    "More than a week ago": "More than a week ago",
    "More than a year ago": "More than a year ago",
    "Move to top of queue": "الانتقال لأعلى قائمة الانتظار",
    "Multi level wildcard (matches multiple directory levels)": "Multi level wildcard (matches multiple directory levels)",
    "Never": "أبدا",
    "New Device": "جهاز جديد",
    "New Folder": "مجلد جديد",
    "Newest First": "الأحدث أولا",
    "No": "لا",
    "No File Versioning": "No File Versioning",
    "No files will be deleted as a result of this operation.": "لن يتم حذف اي ملفات بسبب هذا العملية",
    "No rules set": "No rules set",
    "No upgrades": "لا يوجد ترقيات",
    "Not shared": "Not shared",
    "Notice": "ملاحظة",
    "OK": "موافق",
    "Off": "اطفئ",
    "Oldest First": "الأقدم أولا",
    "Optional descriptive label for the folder. Can be different on each device.": "تسمية وصفية اختيارية للمجلد . يمكن أن تكون مختلفة على كل جهاز. ",
    "Options": "خيارات",
    "Out of Sync": "خارج التزامن",
    "Out of Sync Items": "عناصر خارج التزامن",
    "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
    "Override": "Override",
    "Override Changes": "تخطي التغييرات",
    "Ownership": "Ownership",
    "Path": "مسار",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "المسار حيث تخزن الإصدارات (يترك فارغًا لدليل .vversions الافتراضي في المجلد المشترك).",
    "Paths": "Paths",
    "Pause": "إيقاف",
    "Pause All": "أيقاف الكل ",
    "Paused": "توقف",
    "Paused (Unused)": "Paused (Unused)",
    "Pending changes": "التغييرات المعلقة",
    "Periodic scanning at given interval and disabled watching for changes": "المسح الدوري خلال فترة زمنية معينة وتعطيل مشاهدة التغييرات.",
    "Periodic scanning at given interval and enabled watching for changes": "المسح الدوري خلال فترة زمنية معينة وتفعيل مشاهدة التغييرات.",
    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "المسح الدوري خلال فترة زمنية معينة وفشل اعداد مشاهدة التغييرات، اعادة المحاولة كل 1 دقيقة.",
    "Permanently add it to the ignore list, suppressing further notifications.": "Permanently add it to the ignore list, suppressing further notifications.",
    "Please consult the release notes before performing a major upgrade.": "يرجى العودة إلى ملاحظات الإصدار قبل تنفيذ ترقية رئيسية.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialog.",
    "Please wait": "يرجى الانتظار",
    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preparing to Sync": "Preparing to Sync",
    "Preview": "معاينة",
    "Preview Usage Report": "معاينة تقرير الاستخدام",
    "QR code": "QR code",
    "QUIC LAN": "QUIC LAN",
    "QUIC WAN": "QUIC WAN",
    "QUIC connections are in most cases considered suboptimal": "QUIC connections are in most cases considered suboptimal",
    "Quick guide to supported patterns": "الدليل مختصر للأنماط المدعومة ",
    "Random": "عشوائي",
    "Receive Encrypted": "Receive Encrypted",
    "Receive Only": "استقبال فقط",
    "Received data is already encrypted": "Received data is already encrypted",
    "Recent Changes": "اخر التغييرات",
    "Reduced by ignore patterns": "تقليص بواسطة تجاهل الأنماط. ",
    "Relay LAN": "Relay LAN",
    "Relay WAN": "Relay WAN",
    "Release Notes": "ملاحظات الإصدار",
    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
    "Remote Devices": "جهاز بعيد",
    "Remote GUI": "Remote GUI",
    "Remove": "إزالة",
    "Remove Device": "حذف جهاز",
    "Remove Folder": "حذف مجلد",
    "Required identifier for the folder. Must be the same on all cluster devices.": "يتطلب معرفًا للمجلد. يجب أن يستخدم نفس المعرف لبقية الأجهزة. ",
    "Rescan": "إعادة فحص",
    "Rescan All": "أعادة فحص الكل",
    "Rescans": "يعيد الفحص",
    "Restart": "إعادة تشغيل",
    "Restart Needed": "مطلوب أعادة تشغيل",
    "Restarting": "يتم إعادة التشغيل",
    "Restore": "استعادة",
    "Restore Versions": "استعادة أصدارات ",
    "Resume": "استرد",
    "Resume All": "استعادة الكل ",
    "Reused": "إعادة الاستخدام",
    "Revert": "Revert",
    "Revert Local Changes": "التراجع عن التغييرات",
    "Save": "حفظ",
    "Scan Time Remaining": "فحص الوقت المتبقي",
    "Scanning": "يتم الفحص",
    "See external versioning help for supported templated command line parameters.": "راجع تعليمات الإصدارات الخارجية لمعرفة القيم المدعومة في سطر الأوامر. ",
    "Select All": "تحديد الكل",
    "Select a version": "اختار أصدار ",
    "Select additional devices to share this folder with.": "Select additional devices to share this folder with.",
    "Select additional folders to share with this device.": "Select additional folders to share with this device.",
    "Select latest version": "اختار اخر أصدار ",
    "Select oldest version": "اختيار أقدم إصدار",
    "Send & Receive": "إرسال واستقبال ",
    "Send Extended Attributes": "Send Extended Attributes",
    "Send Only": "إرسال فقط",
    "Send Ownership": "Send Ownership",
    "Set Ignores on Added Folder": "Set Ignores on Added Folder",
    "Settings": "إعدادات",
    "Share": "مشاركة",
    "Share Folder": "مشاركة مجلد",
    "Share by Email": "Share by Email",
    "Share by SMS": "Share by SMS",
    "Share this folder?": "مشاركة هذا المجلد؟",
    "Shared Folders": "Shared Folders",
    "Shared With": "مشاركة مع",
    "Sharing": "مشاركه",
    "Show ID": "عرض الهوية",
    "Show QR": "اظهار QR",
    "Show detailed discovery status": "Show detailed discovery status",
    "Show detailed listener status": "Show detailed listener status",
    "Show diff with previous version": "اظهر الفرق مع النسخة السابقة ",
    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
    "Shutdown": "إغلاق",
    "Shutdown Complete": "تم الإغلاق",
    "Simple": "Simple",
    "Simple File Versioning": "Simple File Versioning",
    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
    "Size": "حجم",
    "Smallest First": "الأصغر أولا",
    "Some discovery methods could not be established for finding other devices or announcing this device:": "Some discovery methods could not be established for finding other devices or announcing this device:",
    "Some items could not be restored:": "بعض العناصر لا يمكن استرجاعها:",
    "Some listening addresses could not be enabled to accept connections:": "Some listening addresses could not be enabled to accept connections:",
    "Source Code": "مصدر الشفرة",
    "Stable releases and release candidates": "الإصدارات المستقرة والإصدارات المرشحة.",
    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "الإصدارات المستقرة تأخرت بنحو أسبوعين. خلال هذه الفترة يتم إجراء الاختبارات كإصدارات مرشحة.",
    "Stable releases only": "الإصدارات المستقرة فقط",
    "Staggered": "Staggered",
    "Staggered File Versioning": "Staggered File Versioning",
    "Start Browser": "تشغيل المتصفح",
    "Statistics": "إحصائيات",
    "Stopped": "متوقف",
    "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{{receiveEncrypted}}\" too.",
    "Subject:": "Subject:",
    "Support": "الدعم",
    "Support Bundle": "حزمه مدعومه",
    "Sync Extended Attributes": "Sync Extended Attributes",
    "Sync Ownership": "Sync Ownership",
    "Sync Protocol Listen Addresses": "عناوين بروتوكول استقبال المزامنة",
    "Sync Status": "Sync Status",
    "Syncing": "يتم التزامن",
    "Syncthing device ID for \"{%devicename%}\"": "Syncthing device ID for \"{{devicename}}\"",
    "Syncthing has been shut down.": "تم إيقاف Syncthing.",
    "Syncthing includes the following software or portions thereof:": "المزامنة تتضمن البرامج التالية أو أجزائها:",
    "Syncthing is Free and Open Source Software licensed as MPL v2.0.": "Syncthing is Free and Open Source Software licensed as MPL v2.0.",
    "Syncthing is a continuous file synchronization program. It synchronizes files between two or more computers in real time, safely protected from prying eyes. Your data is your data alone and you deserve to choose where it is stored, whether it is shared with some third party, and how it's transmitted over the internet.": "Syncthing is a continuous file synchronization program. It synchronizes files between two or more computers in real time, safely protected from prying eyes. Your data is your data alone and you deserve to choose where it is stored, whether it is shared with some third party, and how it's transmitted over the internet.",
    "Syncthing is listening on the following network addresses for connection attempts from other devices:": "Syncthing is listening on the following network addresses for connection attempts from other devices:",
    "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.": "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.",
    "Syncthing is restarting.": "يتم إعادة تشغيل Syncthing.",
    "Syncthing is upgrading.": "يتم تطوير Syncthing.",
    "Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.": "Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.",
    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…",
    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.",
    "TCP LAN": "TCP LAN",
    "TCP WAN": "TCP WAN",
    "Take me back": "رجوع",
    "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.": "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.",
    "The Syncthing Authors": "The Syncthing Authors",
    "The Syncthing admin interface is configured to allow remote access without a password.": "The Syncthing admin interface is configured to allow remote access without a password.",
    "The aggregated statistics are publicly available at the URL below.": "The aggregated statistics are publicly available at the URL below.",
    "The cleanup interval cannot be blank.": "The cleanup interval cannot be blank.",
    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "تم حفظ الإعدادات ولكن لم يتم تفعيلها بعد. يجب أعادة تشغيل Syncthing حتى تم تفعيل الإعدادات.",
    "The device ID cannot be blank.": "هوية الجهاز لا يمكن أن تكون فارغة.",
    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
    "The folder ID cannot be blank.": "هوية المجلد لا يمكن أن تكون فارغة.",
    "The folder ID must be unique.": "يجب أن يكون عنوان المجلد فريد ",
    "The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.": "The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.",
    "The folder content on this device will be overwritten to become identical with other devices. Files newly added here will be deleted.": "The folder content on this device will be overwritten to become identical with other devices. Files newly added here will be deleted.",
    "The folder path cannot be blank.": "مسار المجلد لا يمكن أن يكون فارغ",
    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
    "The following items could not be synchronized.": "فشل مزامنة العناصر التالية",
    "The following items were changed locally.": "تم تغيير العناصر التالية محليا",
    "The following methods are used to discover other devices on the network and announce this device to be found by others:": "The following methods are used to discover other devices on the network and announce this device to be found by others:",
    "The following text will automatically be inserted into a new message.": "The following text will automatically be inserted into a new message.",
    "The following unexpected items were found.": "The following unexpected items were found.",
    "The interval must be a positive number of seconds.": "The interval must be a positive number of seconds.",
    "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.",
    "The maximum age must be a number and cannot be blank.": "الحد الأقصى للسن يجب أن يكون رقمًا وألا يكون فارغًا.",
    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "الحد الأقصى للاحتفاظ بإصدار ما (بالأيام ، اضبط على 0 للاحتفاظ بالإصدارات إلى الأبد).",
    "The number of days must be a number and cannot be blank.": "حقل عدد الأيام يجب أن يكون رقم ولا يمكن تركه فارغ.",
    "The number of days to keep files in the trash can. Zero means forever.": "عدد أيام حفظ الملفات في سلة المهملات. الصفر يعني إلى الأبد.",
    "The number of old versions to keep, per file.": "عدد النسخ القديمة المحفوظة، لكل ملف. ",
    "The number of versions must be a number and cannot be blank.": "حقل عدد النسخ يجب أن يكون رقم ولا يمكن أن تركة فارغا.",
    "The path cannot be blank.": "المسار لا يمكن أن يكون فارغ.",
    "The rate limit must be a non-negative number (0: no limit)": "يجب أن يكون الحد عددًا غير سالب (0: تعني بلا حد)",
    "The remote device has not accepted sharing this folder.": "The remote device has not accepted sharing this folder.",
    "The remote device has paused this folder.": "The remote device has paused this folder.",
    "The rescan interval must be a non-negative number of seconds.": "يجب أن يكون الفاصل الزمني لإعادة الفحص عددًا غير سالب من الثواني.",
    "There are no devices to share this folder with.": "There are no devices to share this folder with.",
    "There are no file versions to restore.": "There are no file versions to restore.",
    "There are no folders to share with this device.": "There are no folders to share with this device.",
    "They are retried automatically and will be synced when the error is resolved.": "تتم إعادة المحاولة تلقائيًا وسيتم مزامنتها عند إصلاح الخطأ.",
    "This Device": "هذا الجهاز",
    "This Month": "This Month",
    "This can easily give hackers access to read and change any files on your computer.": "هذا قد يسبب في اختراق جهازك.",
    "This device cannot automatically discover other devices or announce its own address to be found by others.  Only devices with statically configured addresses can connect.": "This device cannot automatically discover other devices or announce its own address to be found by others.  Only devices with statically configured addresses can connect.",
    "This is a major version upgrade.": "ترقية أساسية ",
    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
    "Time": "الوقت",
    "Time the item was last modified": "توقيت اخر تعديل للعنصر",
    "To connect with the Syncthing device named \"{%devicename%}\", add a new remote device on your end with this ID:": "To connect with the Syncthing device named \"{{devicename}}\", add a new remote device on your end with this ID:",
    "To permit a rule, have the checkbox checked. To deny a rule, leave it unchecked.": "To permit a rule, have the checkbox checked. To deny a rule, leave it unchecked.",
    "Today": "Today",
    "Trash Can": "Trash Can",
    "Trash Can File Versioning": "Trash Can File Versioning",
    "Twitter": "Twitter",
    "Type": "نوع",
    "UNIX Permissions": "UNIX Permissions",
    "Unavailable": "غير متوفر",
    "Unavailable/Disabled by administrator or maintainer": "غير متوفر/معطل من قبل المسؤول أو الصيانة",
    "Undecided (will prompt)": "غير محدد ( ستظهر نافذة للتحديد لاحقًا )",
    "Unexpected Items": "Unexpected Items",
    "Unexpected items have been found in this folder.": "Unexpected items have been found in this folder.",
    "Unignore": "لا يتم التجاهل",
    "Unknown": "غير معرف",
    "Unshared": "غير مشترك",
    "Unshared Devices": "Unshared Devices",
    "Unshared Folders": "Unshared Folders",
    "Untrusted": "Untrusted",
    "Up to Date": "اخز أصدار ",
    "Updated {%file%}": "Updated {{file}}",
    "Upgrade": "ترقية",
    "Upgrade To {%version%}": "ترقية الى {{version}} ",
    "Upgrading": "جاري الترقية",
    "Upload Rate": "معدل الرفع",
    "Uptime": "وقت التشغيل",
    "Usage reporting is always enabled for candidate releases.": "تقارير الاستخدام مفعلة دائمًا للنسخ المرشحة.",
    "Use HTTPS for GUI": "استخدام HTTPS مع الواجه الرسومية ",
    "Use notifications from the filesystem to detect changed items.": "استخدم أشغارات نظام الملفات لمعرفة الملفات المتغيرة",
    "User Home": "User Home",
    "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
    "Using a direct TCP connection over LAN": "Using a direct TCP connection over LAN",
    "Using a direct TCP connection over WAN": "Using a direct TCP connection over WAN",
    "Version": "الإصدار",
    "Versions": "نسخ",
    "Versions Path": "مسار النسخ",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "يتم حذف الإصدارات تلقائيًا إذا تجاوزت العمر الأقصى أو تجاوزت عدد الملفات المسموح بها خلال فاصل زمني محدد.",
    "Waiting to Clean": "Waiting to Clean",
    "Waiting to Scan": "Waiting to Scan",
    "Waiting to Sync": "Waiting to Sync",
    "Warning": "Warning",
    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a parent directory of an existing folder \"{{otherFolder}}\".",
    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Warning: If you are using an external watcher like {{syncthingInotify}}, you should make sure it is deactivated.",
    "Watch for Changes": "راقب التغييرات",
    "Watching for Changes": "جاري مراقبة التغيرات",
    "Watching for changes discovers most changes without periodic scanning.": "مراقبة التغييرات تكشف معظم التغييرات دون إجراء المسح الدوري.",
    "When adding a new device, keep in mind that this device must be added on the other side too.": " يجب أضافه الأجهزة الجديدة  في الطرفين",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "عند إضافة مجلد جديد ، ضع في الاعتبار أن معرف المجلد يُستخدم لربط المجلدات معًا بين الأجهزة المختلفة. وهي حساسة لحالة الأحرف لذا يجب أن تتطابق تمامًا بين جميع الأجهزة.",
    "Yes": "نعم",
    "Yesterday": "Yesterday",
    "You can also copy and paste the text into a new message manually.": "You can also copy and paste the text into a new message manually.",
    "You can also select one of these nearby devices:": "يمكنك أيضا اختيار واحد من الأجهزة القريبة ",
    "You can change your choice at any time in the Settings dialog.": "يمكنك تغيير اختيارك في أي وقت بواسطة الاعدادات.",
    "You can read more about the two release channels at the link below.": "يمكنك قراءة المزيد عن إصداريّ القناتين عبر الرابط بالأسفل.",
    "You have no ignored devices.": "لا يوجد أجهزة في قائمة التجاهل ",
    "You have no ignored folders.": "لا يوجد مجلدات في قائمه التجاهل ",
    "You have unsaved changes. Do you really want to discard them?": "الإعدادات لم تحفظ. هل انت متأكد من الإلغاء؟ ",
    "You must keep at least one version.": "يجب الاحتفاظ  بنسخة واحده على الاقل",
    "You should never add or change anything locally in a \"{%receiveEncrypted%}\" folder.": "You should never add or change anything locally in a \"{{receiveEncrypted}}\" folder.",
    "Your SMS app should open to let you choose the recipient and send it from your own number.": "Your SMS app should open to let you choose the recipient and send it from your own number.",
    "Your email app should open to let you choose the recipient and send it from your own address.": "Your email app should open to let you choose the recipient and send it from your own address.",
    "days": "أيام",
    "deleted": "deleted",
    "deny": "deny",
    "directories": "مجلدات",
    "file": "file",
    "files": "ملفات",
    "folder": "folder",
    "full documentation": "الوثائق الكاملة",
    "items": "العناصر",
    "modified": "modified",
    "permit": "permit",
    "seconds": "seconds",
    "theme-name-black": "Black",
    "theme-name-dark": "Dark",
    "theme-name-default": "Default",
    "theme-name-light": "Light",
    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} يريد مشاركة مجلد \"{{folder}}\". ",
    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} يريد مشاركة مجلد \"{{folderlabel}}\" ({{folder}}). ",
    "{%reintroducer%} might reintroduce this device.": "{{reintroducer}} might reintroduce this device."
}