syncthing/vendor/github.com/minio/minio-go/api-error-response.go
Jakob Borg 916ec63af6 cmd/stdiscosrv: New discovery server (fixes #4618)
This is a new revision of the discovery server. Relevant changes and
non-changes:

- Protocol towards clients is unchanged.

- Recommended large scale design is still to be deployed nehind nginx (I
  tested, and it's still a lot faster at terminating TLS).

- Database backend is leveldb again, only. It scales enough, is easy to
  setup, and we don't need any backend to take care of.

- Server supports replication. This is a simple TCP channel - protect it
  with a firewall when deploying over the internet. (We deploy this within
  the same datacenter, and with firewall.) Any incoming client announces
  are sent over the replication channel(s) to other peer discosrvs.
  Incoming replication changes are applied to the database as if they came
  from clients, but without the TLS/certificate overhead.

- Metrics are exposed using the prometheus library, when enabled.

- The database values and replication protocol is protobuf, because JSON
  was quite CPU intensive when I tried that and benchmarked it.

- The "Retry-After" value for failed lookups gets slowly increased from
  a default of 120 seconds, by 5 seconds for each failed lookup,
  independently by each discosrv. This lowers the query load over time for
  clients that are never seen. The Retry-After maxes out at 3600 after a
  couple of weeks of this increase. The number of failed lookups is
  stored in the database, now and then (avoiding making each lookup a
  database put).

All in all this means clients can be pointed towards a cluster using
just multiple A / AAAA records to gain both load sharing and redundancy
(if one is down, clients will talk to the remaining ones).

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
2018-01-14 08:52:31 +00:00

287 lines
8.0 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Minio Go Library for Amazon S3 Compatible Cloud Storage
* Copyright 2015-2017 Minio, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package minio
import (
"encoding/xml"
"fmt"
"net/http"
)
/* **** SAMPLE ERROR RESPONSE ****
<?xml version="1.0" encoding="UTF-8"?>
<Error>
<Code>AccessDenied</Code>
<Message>Access Denied</Message>
<BucketName>bucketName</BucketName>
<Key>objectName</Key>
<RequestId>F19772218238A85A</RequestId>
<HostId>GuWkjyviSiGHizehqpmsD1ndz5NClSP19DOT+s2mv7gXGQ8/X1lhbDGiIJEXpGFD</HostId>
</Error>
*/
// ErrorResponse - Is the typed error returned by all API operations.
type ErrorResponse struct {
XMLName xml.Name `xml:"Error" json:"-"`
Code string
Message string
BucketName string
Key string
RequestID string `xml:"RequestId"`
HostID string `xml:"HostId"`
// Region where the bucket is located. This header is returned
// only in HEAD bucket and ListObjects response.
Region string
// Underlying HTTP status code for the returned error
StatusCode int `xml:"-" json:"-"`
// Headers of the returned S3 XML error
Headers http.Header `xml:"-" json:"-"`
}
// ToErrorResponse - Returns parsed ErrorResponse struct from body and
// http headers.
//
// For example:
//
// import s3 "github.com/minio/minio-go"
// ...
// ...
// reader, stat, err := s3.GetObject(...)
// if err != nil {
// resp := s3.ToErrorResponse(err)
// }
// ...
func ToErrorResponse(err error) ErrorResponse {
switch err := err.(type) {
case ErrorResponse:
return err
default:
return ErrorResponse{}
}
}
// Error - Returns S3 error string.
func (e ErrorResponse) Error() string {
if e.Message == "" {
msg, ok := s3ErrorResponseMap[e.Code]
if !ok {
msg = fmt.Sprintf("Error response code %s.", e.Code)
}
return msg
}
return e.Message
}
// Common string for errors to report issue location in unexpected
// cases.
const (
reportIssue = "Please report this issue at https://github.com/minio/minio-go/issues."
)
// httpRespToErrorResponse returns a new encoded ErrorResponse
// structure as error.
func httpRespToErrorResponse(resp *http.Response, bucketName, objectName string) error {
if resp == nil {
msg := "Response is empty. " + reportIssue
return ErrInvalidArgument(msg)
}
errResp := ErrorResponse{
StatusCode: resp.StatusCode,
}
err := xmlDecoder(resp.Body, &errResp)
// Xml decoding failed with no body, fall back to HTTP headers.
if err != nil {
switch resp.StatusCode {
case http.StatusNotFound:
if objectName == "" {
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: "NoSuchBucket",
Message: "The specified bucket does not exist.",
BucketName: bucketName,
}
} else {
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: "NoSuchKey",
Message: "The specified key does not exist.",
BucketName: bucketName,
Key: objectName,
}
}
case http.StatusForbidden:
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: "AccessDenied",
Message: "Access Denied.",
BucketName: bucketName,
Key: objectName,
}
case http.StatusConflict:
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: "Conflict",
Message: "Bucket not empty.",
BucketName: bucketName,
}
case http.StatusPreconditionFailed:
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: "PreconditionFailed",
Message: s3ErrorResponseMap["PreconditionFailed"],
BucketName: bucketName,
Key: objectName,
}
default:
errResp = ErrorResponse{
StatusCode: resp.StatusCode,
Code: resp.Status,
Message: resp.Status,
BucketName: bucketName,
}
}
}
// Save hostID, requestID and region information
// from headers if not available through error XML.
if errResp.RequestID == "" {
errResp.RequestID = resp.Header.Get("x-amz-request-id")
}
if errResp.HostID == "" {
errResp.HostID = resp.Header.Get("x-amz-id-2")
}
if errResp.Region == "" {
errResp.Region = resp.Header.Get("x-amz-bucket-region")
}
if errResp.Code == "InvalidRegion" && errResp.Region != "" {
errResp.Message = fmt.Sprintf("Region does not match, expecting region %s.", errResp.Region)
}
// Save headers returned in the API XML error
errResp.Headers = resp.Header
return errResp
}
// ErrTransferAccelerationBucket - bucket name is invalid to be used with transfer acceleration.
func ErrTransferAccelerationBucket(bucketName string) error {
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "InvalidArgument",
Message: "The name of the bucket used for Transfer Acceleration must be DNS-compliant and must not contain periods ..",
BucketName: bucketName,
}
}
// ErrEntityTooLarge - Input size is larger than supported maximum.
func ErrEntityTooLarge(totalSize, maxObjectSize int64, bucketName, objectName string) error {
msg := fmt.Sprintf("Your proposed upload size %d exceeds the maximum allowed object size %d for single PUT operation.", totalSize, maxObjectSize)
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "EntityTooLarge",
Message: msg,
BucketName: bucketName,
Key: objectName,
}
}
// ErrEntityTooSmall - Input size is smaller than supported minimum.
func ErrEntityTooSmall(totalSize int64, bucketName, objectName string) error {
msg := fmt.Sprintf("Your proposed upload size %d is below the minimum allowed object size 0B for single PUT operation.", totalSize)
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "EntityTooSmall",
Message: msg,
BucketName: bucketName,
Key: objectName,
}
}
// ErrUnexpectedEOF - Unexpected end of file reached.
func ErrUnexpectedEOF(totalRead, totalSize int64, bucketName, objectName string) error {
msg := fmt.Sprintf("Data read %d is not equal to the size %d of the input Reader.", totalRead, totalSize)
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "UnexpectedEOF",
Message: msg,
BucketName: bucketName,
Key: objectName,
}
}
// ErrInvalidBucketName - Invalid bucket name response.
func ErrInvalidBucketName(message string) error {
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "InvalidBucketName",
Message: message,
RequestID: "minio",
}
}
// ErrInvalidObjectName - Invalid object name response.
func ErrInvalidObjectName(message string) error {
return ErrorResponse{
StatusCode: http.StatusNotFound,
Code: "NoSuchKey",
Message: message,
RequestID: "minio",
}
}
// ErrInvalidObjectPrefix - Invalid object prefix response is
// similar to object name response.
var ErrInvalidObjectPrefix = ErrInvalidObjectName
// ErrInvalidArgument - Invalid argument response.
func ErrInvalidArgument(message string) error {
return ErrorResponse{
StatusCode: http.StatusBadRequest,
Code: "InvalidArgument",
Message: message,
RequestID: "minio",
}
}
// ErrNoSuchBucketPolicy - No Such Bucket Policy response
// The specified bucket does not have a bucket policy.
func ErrNoSuchBucketPolicy(message string) error {
return ErrorResponse{
StatusCode: http.StatusNotFound,
Code: "NoSuchBucketPolicy",
Message: message,
RequestID: "minio",
}
}
// ErrAPINotSupported - API not supported response
// The specified API call is not supported
func ErrAPINotSupported(message string) error {
return ErrorResponse{
StatusCode: http.StatusNotImplemented,
Code: "APINotSupported",
Message: message,
RequestID: "minio",
}
}