syncthing/gui/lang/lang-zh-TW.json

{
    "API Key": "API 金鑰",
    "About": "關於",
    "Add Device": "Add Device",
    "Add Folder": "Add Folder",
    "Address": "位址",
    "Addresses": "位址",
    "Allow Anonymous Usage Reporting?": "允許匿名的使用資訊回報？",
    "Anonymous Usage Reporting": "匿名的使用資訊回報",
    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
    "Bugs": "程式錯誤",
    "CPU Utilization": "CPU 使用率",
    "Close": "關閉",
    "Comment, when used at the start of a line": "註解，當輸入在一行的開頭時",
    "Compression is recommended in most setups.": "建議在大多數的設置中使用壓縮。",
    "Connection Error": "連線錯誤",
    "Copyright © 2014 Jakob Borg and the following Contributors:": "版權所有 © 2014 Jakob Borg 及以下貢獻者：",
    "Delete": "刪除",
    "Device ID": "Device ID",
    "Device Identification": "Device Identification",
    "Device Name": "Device Name",
    "Disconnected": "斷線",
    "Documentation": "說明文件",
    "Download Rate": "下載速率",
    "Edit": "編輯",
    "Edit Device": "Edit Device",
    "Edit Folder": "Edit Folder",
    "Editing": "正在編輯",
    "Enable UPnP": "啟用 UPnP",
    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號區隔的 \"ip:連接埠\" 位址，或著輸入 \"dynamic\" 以進行位址的自動探索",
    "Enter ignore patterns, one per line.": "輸入忽略樣式，每行一種。",
    "Error": "錯誤",
    "File Versioning": "檔案版本控制",
    "File permission bits are ignored when looking for changes. Use on FAT filesystems.": "當在尋找變化時，檔案權限位元會被忽略。用於 FAT 檔案系統。",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "當檔案被 syncthing 取代或刪除時，它們將被移至 .stversions 資料夾並添加日期戳記。",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.",
    "Folder ID": "Folder ID",
    "Folder Master": "Folder Master",
    "Folder Path": "Folder Path",
    "GUI Authentication Password": "GUI 認證密碼",
    "GUI Authentication User": "GUI 認證使用者名稱",
    "GUI Listen Addresses": "GUI 監聽位址",
    "Generate": "產生",
    "Global Discovery": "全域探索",
    "Global Discovery Server": "全域探索伺服器",
    "Global State": "Global State",
    "Idle": "閒置",
    "Ignore Patterns": "忽略樣式",
    "Ignore Permissions": "忽略權限",
    "Incoming Rate Limit (KiB/s)": "連入速率限制 (KiB/s)",
    "Introducer": "引入者",
    "Inversion of the given condition (i.e. do not exclude)": "反轉給定條件 (即：不要排除)",
    "Keep Versions": "保留歷史版本數",
    "Last seen": "最後發現時間",
    "Latest Release": "最新發佈",
    "Local Discovery": "本地探索",
    "Local State": "Local State",
    "Maximum Age": "最長保留時間",
    "Multi level wildcard (matches multiple directory levels)": "多階層萬用字元 (可比對多層資料夾)",
    "Never": "從未",
    "No": "否",
    "No File Versioning": "無檔案版本控制",
    "Notice": "注意",
    "OK": "確定",
    "Offline": "離線",
    "Online": "上線",
    "Out Of Sync": "不同步",
    "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
    "Override Changes": "覆蓋改變",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
    "Please wait": "請稍後",
    "Preview": "預覽",
    "Preview Usage Report": "預覽使用資訊報告",
    "Quick guide to supported patterns": "可支援樣式的快速指南",
    "RAM Utilization": "記憶體使用率",
    "Rescan": "重新掃描",
    "Rescan Interval": "重新掃描間隔",
    "Restart": "重新啟動",
    "Restart Needed": "需要重新啟動",
    "Restarting": "正在重新啟動",
    "Save": "儲存",
    "Scanning": "正在掃描",
    "Select the devices to share this folder with.": "Select the devices to share this folder with.",
    "Settings": "設定",
    "Share With Devices": "Share With Devices",
    "Shared With": "與誰共享",
    "Short identifier for the folder. Must be the same on all cluster devices.": "Short identifier for the folder. Must be the same on all cluster devices.",
    "Show ID": "顯示識別碼",
    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
    "Shutdown": "關閉",
    "Simple File Versioning": "簡單檔案版本控制",
    "Single level wildcard (matches within a directory only)": "單階層萬用字元 (只在單個資料夾階層內比對)",
    "Source Code": "原始碼",
    "Staggered File Versioning": "變動式檔案版本控制",
    "Start Browser": "啟動瀏覽器",
    "Stopped": "已停止",
    "Support / Forum": "支援 / 論壇",
    "Sync Protocol Listen Addresses": "同步通訊協定監聽位址",
    "Synchronization": "同步作業",
    "Syncing": "正在同步",
    "Syncthing has been shut down.": "Syncthing 已經關閉。",
    "Syncthing includes the following software or portions thereof:": "Syncthing 包括以下軟體或其中的一部分：",
    "Syncthing is restarting.": "Syncthing 正在重新啟動。",
    "Syncthing is upgrading.": "Syncthing 正在進行升級。",
    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing 似乎下線了，或者您的網際網路連線出現問題。正在重試...",
    "The aggregated statistics are publicly available at {%url%}.": "匯總統計資訊公佈於 {{url}}。",
    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "組態已經儲存但尚未啟用。Syncthing 必須重新啟動以便啟用新的組態。",
    "The device ID cannot be blank.": "The device ID cannot be blank.",
    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
    "The folder ID cannot be blank.": "The folder ID cannot be blank.",
    "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.",
    "The folder ID must be unique.": "The folder ID must be unique.",
    "The folder path cannot be blank.": "The folder path cannot be blank.",
    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "使用下列的間隔：在第一個小時內每 30 秒保留一個版本，在第一天內每小時保留一個版本，在第 30 天內每一天保留一個版本，在達到最長保留時間前每一星期保留一個版本。",
    "The maximum age must be a number and cannot be blank.": "最長保留時間最大必須為一個數字且不得為空。",
    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "一個版本被保留的最長時間 (單位為天，若設定為 0 則表示永遠保留)。",
    "The number of old versions to keep, per file.": "每個檔案要保留的舊版本數量。",
    "The number of versions must be a number and cannot be blank.": "每個檔案要保留的舊版本數量必須是數字且不能為空白。",
    "The rescan interval must be at least 5 seconds.": "重新掃描間隔至少須為 5 秒。",
    "Unknown": "未知",
    "Up to Date": "最新",
    "Upgrade To {%version%}": "升級到 {{version}}",
    "Upgrading": "正在升級",
    "Upload Rate": "上載速率",
    "Use Compression": "使用壓縮",
    "Use HTTPS for GUI": "為 GUI 使用 HTTPS",
    "Version": "版本",
    "Versions Path": "歷史版本路徑",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "當檔案歷史版本的存留時間大於設定的最大值，或是其數量在一段時間內超出允許值時，則會被刪除。",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
    "Yes": "是",
    "You must keep at least one version.": "您必須保留至少一個版本。",
    "full documentation": "完整說明文件",
    "items": "個項目"
}