octoleo/syncthing
1
0
Fork 0
mirror of https://github.com/octoleo/syncthing.git synced 2024-11-05 21:07:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
f09dcb98eb
syncthing/man/syncthing-bep.7

1174 lines
34 KiB
Groff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.\" Man page generated from reStructuredText.
.
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "SYNCTHING-BEP" "7" "Apr 26, 2021" "v1" "Syncthing"
.SH NAME
syncthing-bep \- Block Exchange Protocol v1
.SH INTRODUCTION AND DEFINITIONS
.sp
The Block Exchange Protocol (BEP) is used between two or more \fIdevices\fP thus
forming a \fIcluster\fP\&. Each device has one or more \fIfolders\fP of files
described by the \fIlocal model\fP, containing metadata and block hashes. The
local model is sent to the other devices in the cluster. The union of all
files in the local models, with files selected for highest change version,
forms the \fIglobal model\fP\&. Each device strives to get its folders in sync
with the global model by requesting missing or outdated blocks from the
other devices in the cluster.
.sp
File data is described and transferred in units of \fIblocks\fP, each being from
128 KiB (131072 bytes) to 16 MiB in size, in steps of powers of two. The
block size may vary between files but is constant in any given file, except
for the last block which may be smaller.
.sp
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”,
“SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this
document are to be interpreted as described in [RFC 2119](\fI\%https://tools.ietf.org/html/rfc2119\fP).
.SH TRANSPORT AND AUTHENTICATION
.sp
BEP is deployed as the highest level in a protocol stack, with the lower
level protocols providing encryption and authentication.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-+
| Block Exchange Protocol |
|\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-|
| Encryption & Auth (TLS 1.2) |
|\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-|
| Reliable Transport |
|\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-|
v ... v
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The encryption and authentication layer SHALL use TLS 1.2 or a higher
revision. A strong cipher suite SHALL be used, with “strong cipher
suite” being defined as being without known weaknesses and providing
Perfect Forward Secrecy (PFS). Examples of strong cipher suites are
given at the end of this document. This is not to be taken as an
exhaustive list of allowed cipher suites but represents best practices
at the time of writing.
.sp
The exact nature of the authentication is up to the application, however
it SHALL be based on the TLS certificate presented at the start of the
connection. Possibilities include certificates signed by a common
trusted CA, preshared certificates, preshared certificate fingerprints
or certificate pinning combined with some out of band first
verification. The reference implementation uses preshared certificate
fingerprints (SHA\-256) referred to as “Device IDs”.
.sp
There is no required order or synchronization among BEP messages except
as noted per message type \- any message type may be sent at any time and
the sender need not await a response to one message before sending
another.
.sp
The underlying transport protocol MUST guarantee reliable packet delivery.
.sp
In this document, in diagrams and text, “bit 0” refers to the \fImost
significant\fP bit of a word; “bit 15” is thus the least significant bit of a
16 bit word (int16) and “bit 31” is the least significant bit of a 32 bit
word (int32). Non protocol buffer integers are always represented in network
byte order (i.e., big endian) and are signed unless stated otherwise, but
when describing message lengths negative values do not make sense and the
most significant bit MUST be zero.
.sp
The protocol buffer schemas in this document are in \fBproto3\fP syntax. This
means, among other things, that all fields are optional and will assume
their default value when missing. This does not necessarily mean that a
message is \fIvalid\fP with all fields empty \- for example, an index entry for a
file that does not have a name is not useful and MAY be rejected by the
implementation. However the folder label is for human consumption only so an
empty label should be accepted \- the implementation will have to choose some
way to represent the folder, perhaps by using the ID in it’s place or
automatically generating a label.
.SH PRE-AUTHENTICATION MESSAGES
.sp
AFTER establishing a connection, but BEFORE performing any authentication,
devices MUST exchange Hello messages.
.sp
Hello messages are used to carry additional information about the peer,
which might be of interest to the user even if the peer is not permitted to
communicate due to failing authentication. Note that the certificate based
authentication may be considered part of the TLS handshake that precedes the
Hello message exchange, but even in the case that a connection is rejected a
Hello message must be sent before the connection is terminated.
.sp
Hello messages MUST be prefixed with an int32 containing the magic number
\fB0x2EA7D90B\fP, followed by an int16 representing the size of the message,
followed by the contents of the Hello message itself.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
| Magic |
| (32 bits) |
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
| Length |
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
/ /
\e Hello \e
/ /
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The Hello message itself is in protocol buffer format with the following schema:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Hello {
string device_name = 1;
string client_name = 2;
string client_version = 3;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields (Hello message)
.sp
The \fBdevice_name\fP is a human readable (configured or auto detected) device
name or host name, for the remote device.
.sp
The \fBclient_name\fP and \fBclient_version\fP identifies the implementation. The
values SHOULD be simple strings identifying the implementation name, as a
user would expect to see it, and the version string in the same manner. An
example client name is “syncthing” and an example client version is “v0.7.2”.
The client version field SHOULD follow the patterns laid out in the \fI\%Semantic
Versioning\fP <\fBhttp://semver.org/\fP> standard.
.sp
Immediately after exchanging Hello messages, the connection MUST be dropped
if the remote device does not pass authentication.
.SH POST-AUTHENTICATION MESSAGES
.sp
Every message post authentication is made up of several parts:
.INDENT 0.0
.IP \(bu 2
A header length word
.IP \(bu 2
A \fBHeader\fP
.IP \(bu 2
A message length word
.IP \(bu 2
A \fBMessage\fP
.UNINDENT
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
| Header Length |
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
/ /
\e Header \e
/ /
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
| Message Length |
| (32 bits) |
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
/ /
\e Message \e
/ /
+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+\-+
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The header length word is 16 bits. It indicates the length of the following
\fBHeader\fP message. The Header is in protocol buffer format. The Header
describes the type and compression status of the following message.
.sp
The message is preceded by the 32 bit message length word and is one of the
concrete BEP messages described below, identified by the \fBtype\fP field of
the Header.
.sp
As always, the length words are in network byte order (big endian).
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Header {
MessageType type = 1;
MessageCompression compression = 2;
}
enum MessageType {
CLUSTER_CONFIG = 0;
INDEX = 1;
INDEX_UPDATE = 2;
REQUEST = 3;
RESPONSE = 4;
DOWNLOAD_PROGRESS = 5;
PING = 6;
CLOSE = 7;
}
enum MessageCompression {
NONE = 0;
LZ4 = 1;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
When the \fBcompression\fP field is \fBNONE\fP, the message is directly in
protocol buffer format.
.sp
When the compression field is \fBLZ4\fP, the message consists of a 32 bit
integer describing the uncompressed message length followed by a single LZ4
block. After decompressing the LZ4 block it should be interpreted as a
protocol buffer message just as in the uncompressed case.
.SH MESSAGE SUBTYPES
.SS Cluster Config
.sp
This informational message provides information about the cluster
configuration as it pertains to the current connection. A Cluster Config
message MUST be the first post authentication message sent on a BEP
connection. Additional Cluster Config messages MUST NOT be sent after the
initial exchange.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message ClusterConfig {
repeated Folder folders = 1;
}
message Folder {
string id = 1;
string label = 2;
bool read_only = 3;
bool ignore_permissions = 4;
bool ignore_delete = 5;
bool disable_temp_indexes = 6;
bool paused = 7;
repeated Device devices = 16;
}
message Device {
bytes id = 1;
string name = 2;
repeated string addresses = 3;
Compression compression = 4;
string cert_name = 5;
int64 max_sequence = 6;
bool introducer = 7;
uint64 index_id = 8;
bool skip_introduction_removals = 9;
bytes encryption_password_token = 10;
}
enum Compression {
METADATA = 0;
NEVER = 1;
ALWAYS = 2;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields (Cluster Config Message)
.sp
The \fBfolders\fP field contains the list of folders that will be synchronized
over the current connection.
.SS Fields (Folder Message)
.sp
The \fBid\fP field contains the folder ID, which is the unique identifier of
the folder.
.sp
The \fBlabel\fP field contains the folder label, the human readable name of
the folder.
.sp
The \fBread only\fP field is set for folders that the device will accept no
updates from the network for.
.sp
The \fBignore permissions\fP field is set for folders that the device will not
accept or announce file permissions for.
.sp
The \fBignore delete\fP field is set for folders that the device will ignore
deletes for.
.sp
The \fBdisable temp indexes\fP field is set for folders that will not dispatch
and do not wish to receive progress updates about partially downloaded files
via Download Progress messages.
.sp
The \fBpaused\fP field is set for folders that are currently paused.
.sp
The \fBdevices\fP field is a list of devices participating in sharing this
folder.
.SS Fields (Device Message)
.sp
The device \fBid\fP field is a 32 byte number that uniquely identifies the
device. For instance, the reference implementation uses the SHA\-256 of the
device X.509 certificate.
.sp
The \fBname\fP field is a human readable name assigned to the described device
by the sending device. It MAY be empty and it need not be unique.
.sp
The list of \fBaddresses\fP is that used by the sending device to connect to
the described device.
.sp
The \fBcompression\fP field indicates the compression mode in use for this
device and folder. The following values are valid:
.INDENT 0.0
.TP
.B 0
Compress metadata. This enables compression of metadata messages such as Index.
.TP
.B 1
Compression disabled. No compression is used on any message.
.TP
.B 2
Compress always. Metadata messages as well as Response messages are compressed.
.UNINDENT
.sp
The \fBcert name\fP field indicates the expected certificate name for this
device. It is commonly blank, indicating to use the implementation default.
.sp
The \fBmax sequence\fP field contains the highest sequence number of the files
in the index. See \fI\%Delta Index Exchange\fP for the usage of this field.
.sp
The \fBintroducer\fP field is set for devices that are trusted as cluster
introducers.
.sp
The \fBindex id\fP field contains the unique identifier for the current set of
index data. See \fI\%Delta Index Exchange\fP for the usage of this field.
.sp
The \fBskip introduction removals\fP field signifies if the remote device has
opted to ignore introduction removals for the given device. This setting is
copied across as we are being introduced to a new device.
.sp
The \fBenc pw token\fP field contains a token derived from the password, that is
used to encrypt data sent to this device. If the device is the same as the
device sending the message, it signifies that the device itself has encrypted
data that was encrypted with the given token. It is empty or missing if there is
no encryption. See untrusted for details on the encryption scheme.
.SS Index and Index Update
.sp
The Index and Index Update messages define the contents of the senders
folder. An Index message represents the full contents of the folder and
thus supersedes any previous index. An Index Update amends an existing
index with new information, not affecting any entries not included in
the message. An Index Update MAY NOT be sent unless preceded by an
Index, unless a non\-zero Max Sequence has been announced for the
given folder by the peer device.
.sp
The Index and Index Update messages are currently identical in format,
although this is not guaranteed to be the case in the future.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Index {
string folder = 1;
repeated FileInfo files = 2;
}
message IndexUpdate {
string folder = 1;
repeated FileInfo files = 2;
}
message FileInfo {
string name = 1;
FileInfoType type = 2;
int64 size = 3;
uint32 permissions = 4;
int64 modified_s = 5;
int32 modified_ns = 11;
uint64 modified_by = 12;
bool deleted = 6;
bool invalid = 7;
bool no_permissions = 8;
Vector version = 9;
int64 sequence = 10;
int32 block_size = 13;
repeated BlockInfo Blocks = 16;
string symlink_target = 17;
}
enum FileInfoType {
FILE = 0;
DIRECTORY = 1;
SYMLINK_FILE = 2 [deprecated = true];
SYMLINK_DIRECTORY = 3 [deprecated = true];
SYMLINK = 4;
}
message BlockInfo {
int64 offset = 1;
int32 size = 2;
bytes hash = 3;
uint32 weak_hash = 4;
}
message Vector {
repeated Counter counters = 1;
}
message Counter {
uint64 id = 1;
uint64 value = 2;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields (Index Message)
.sp
The \fBfolder\fP field identifies the folder that the index message pertains to.
.sp
The \fBfiles\fP field is a list of files making up the index information.
.SS Fields (FileInfo Message)
.sp
The \fBname\fP is the file name path relative to the folder root. Like all
strings in BEP, the Name is always in UTF\-8 NFC regardless of operating
system or file system specific conventions. The name field uses the slash
character (“/”) as path separator, regardless of the implementation’s
operating system conventions. The combination of folder and name uniquely
identifies each file in a cluster.
.sp
The \fBtype\fP field contains the type of the described item. The type is one
of \fBfile (0)\fP, \fBdirectory (1)\fP, or \fBsymlink (4)\fP\&.
.sp
The \fBsize\fP field contains the size of the file, in bytes. For directories
and symlinks the size is zero.
.sp
The \fBpermissions\fP field holds the common Unix permission bits. An
implementation MAY ignore or interpret these as is suitable on the host
operating system.
.sp
The \fBmodified_s\fP time is expressed as the number of seconds since the Unix
Epoch (1970\-01\-01 00:00:00 UTC). The \fBmodified_ns\fP field holds the
nanosecond part of the modification time.
.sp
The \fBmodified_by\fP field holds the short id of the client that last made
any modification to the file whether add, change or delete. This will be
overwritten every time a change is made to the file by the last client to do
so and so does not hold history.
.sp
The \fBdeleted\fP field is set when the file has been deleted. The block list
SHALL be of length zero and the modification time indicates the time of
deletion or, if the time of deletion is not reliably determinable, the last
known modification time.
.sp
The \fBinvalid\fP field is set when the file is invalid and unavailable for
synchronization. A peer MAY set this bit to indicate that it can temporarily
not serve data for the file.
.sp
The \fBno permissions\fP field is set when there is no permission information
for the file. This is the case when it originates on a file system which
does not support permissions. Changes to only permission bits SHOULD be
disregarded on files with this bit set. The permissions bits MUST be set to
the octal value 0666.
.sp
The \fBversion\fP field is a version vector describing the updates performed
to a file by all members in the cluster. Each counter in the version vector
is an ID\-Value tuple. The ID is the first 64 bits of the device ID. The
Value is a simple incrementing counter, starting at zero. The combination of
Folder, Name and Version uniquely identifies the contents of a file at a
given point in time.
.sp
The \fBsequence\fP field is the value of a device local monotonic clock at the
time of last local database update to a file. The clock ticks on every local
database update, thus forming a sequence number over database updates.
.sp
The \fBblock_size\fP field is the size, in bytes, of each individual block in
the block list (except, possibly, the last block). If this field is missing
or zero, the block size is assumed to be 128 KiB (131072 bytes). Valid
values of this field are the powers of two from 128 KiB through 16 MiB. See
also \fI\%Selection of Block Size\fP\&.
.sp
The \fBblocks\fP list contains the size and hash for each block in the file.
Each block represents a \fBblock_size\fP\-sized slice of the file, except for
the last block which may represent a smaller amount of data. The block list
is empty for directories and symlinks.
.sp
The \fBsymlink_target\fP field contains the symlink target, for entries of
symlink type. It is empty for all other entry types.
.SS Request
.sp
The Request message expresses the desire to receive a data block
corresponding to a part of a certain file in the peer’s folder.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Request {
int32 id = 1;
string folder = 2;
string name = 3;
int64 offset = 4;
int32 size = 5;
bytes hash = 6;
bool from_temporary = 7;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields
.sp
The \fBid\fP is the request identifier. It will be matched in the
corresponding \fBResponse\fP message. Each outstanding request must have a
unique ID.
.sp
The \fBfolder\fP and \fBname\fP fields are as documented for the Index message.
The \fBoffset\fP and \fBsize\fP fields specify the region of the file to be
transferred. This SHOULD equate to exactly one block as seen in an Index
message.
.sp
The \fIhash\fP field MAY be set to the expected hash value of the block. If set,
the other device SHOULD ensure that the transmitted block matches the
requested hash. The other device MAY reuse a block from a different file and
offset having the same size and hash, if one exists.
.sp
The \fBfrom temporary\fP field is set to indicate that the read should be
performed from the temporary file (converting name to it’s temporary form)
and falling back to the non temporary file if any error occurs. Knowledge of
contents of temporary files comes from DownloadProgress messages.
.SS Response
.sp
The Response message is sent in response to a Request message.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Response {
int32 id = 1;
bytes data = 2;
ErrorCode code = 3;
}
enum ErrorCode {
NO_ERROR = 0;
GENERIC = 1;
NO_SUCH_FILE = 2;
INVALID_FILE = 3;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields
.sp
The \fBid\fP field is the request identifier. It must match the ID of the
\fBRequest\fP that is being responded to.
.sp
The \fBdata\fP field contains either the requested data block or is empty if
the requested block is not available.
.sp
The \fBcode\fP field contains an error code describing the reason a Request
could not be fulfilled, in the case where zero length data was returned. The
following values are defined:
.INDENT 0.0
.TP
.B 0
No Error (data should be present)
.TP
.B 1
Generic Error
.TP
.B 2
No Such File (the requested file does not exist, or the offset is
outside the acceptable range for the file)
.TP
.B 3
Invalid (file exists but has invalid bit set or is otherwise
unavailable)
.UNINDENT
.SS DownloadProgress
.sp
The DownloadProgress message is used to notify remote devices about partial
availability of files. By default, these messages are sent every 5 seconds,
and only in the cases where progress or state changes have been detected.
Each DownloadProgress message is addressed to a specific folder and MUST
contain zero or more FileDownloadProgressUpdate messages.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message DownloadProgress {
string folder = 1;
repeated FileDownloadProgressUpdate updates = 2;
}
message FileDownloadProgressUpdate {
FileDownloadProgressUpdateType update_type = 1;
string name = 2;
Vector version = 3;
repeated int32 block_indexes = 4;
}
enum FileDownloadProgressUpdateType {
APPEND = 0;
FORGET = 1;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields (DownloadProgress Message)
.sp
The \fBfolder\fP field represents the ID of the folder for which the update is
being provided.
.sp
The \fBupdates\fP field is a list of progress update messages.
.SS Fields (FileDownloadProgressUpdate Message)
.sp
The \fBupdate type\fP indicates whether the update is of type \fBappend (0)\fP
(new blocks are available) or \fBforget (1)\fP (the file transfer has
completed or failed).
.sp
The \fBname\fP field defines the file name from the global index for which
this update is being sent.
.sp
The \fBversion\fP message defines the version of the file for which this
update is being sent.
.sp
The \fBblock indexes\fP field is a list of positive integers, where each
integer represents the index of the block in the FileInfo message Blocks
array that has become available for download.
.sp
For example an integer with value 3 represents that the data defined in the
fourth BlockInfo message of the FileInfo message of that file is now
available. Please note that matching should be done on \fBname\fP AND
\fBversion\fP\&. Furthermore, each update received is incremental, for example
the initial update message might contain indexes 0, 1, 2, an update 5
seconds later might contain indexes 3, 4, 5 which should be appended to the
original list, which implies that blocks 0\-5 are currently available.
.sp
Block indexes MAY be added in any order. An implementation MUST NOT assume
that block indexes are added in any specific order.
.sp
The \fBforget\fP field being set implies that previously advertised file is no
longer available, therefore the list of block indexes should be truncated.
.sp
Messages with the \fBforget\fP field set MUST NOT have any block indexes.
.sp
Any update message which is being sent for a different \fBversion\fP of the
same file name must be preceded with an update message for the old version
of that file with the \fBforget\fP field set.
.sp
As a safeguard on the receiving side, the value of \fBversion\fP changing
between update messages implies that the file has changed and that any
indexes previously advertised are no longer available. The list of available
block indexes MUST be replaced (rather than appended) with the indexes
specified in this message.
.SS Ping
.sp
The Ping message is used to determine that a connection is alive, and to
keep connections alive through state tracking network elements such as
firewalls and NAT gateways. A Ping message is sent every 90 seconds, if no
other message has been sent in the preceding 90 seconds.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Ping {
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Close
.sp
The Close message MAY be sent to indicate that the connection will be torn
down due to an error condition. A Close message MUST NOT be followed by
further messages.
.SS Protocol Buffer Schema
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
message Close {
string reason = 1;
}
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Fields
.sp
The \fBreason\fP field contains a human readable description of the error
condition.
.SH SHARING MODES
.SS Trusted
.sp
Trusted mode is the default sharing mode. Updates are exchanged in both
directions.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
+\-\-\-\-\-\-\-\-\-\-\-\-+ Updates /\-\-\-\-\-\-\-\-\-\e
| | \-\-\-\-\-\-\-\-\-\-\-> / \e
| Device | | Cluster |
| | <\-\-\-\-\-\-\-\-\-\-\- \e /
+\-\-\-\-\-\-\-\-\-\-\-\-+ Updates \e\-\-\-\-\-\-\-\-\-/
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Send Only
.sp
In send only mode, a device does not apply any updates from the cluster, but
publishes changes of its local folder to the cluster as usual.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
+\-\-\-\-\-\-\-\-\-\-\-\-+ Updates /\-\-\-\-\-\-\-\-\-\e
| | \-\-\-\-\-\-\-\-\-\-\-> / \e
| Device | | Cluster |
| | \e /
+\-\-\-\-\-\-\-\-\-\-\-\-+ \e\-\-\-\-\-\-\-\-\-/
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Receive Only
.sp
In receive only mode, a device does not send any updates to the cluster, but
accepts changes to its local folder from the cluster as usual.
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
+\-\-\-\-\-\-\-\-\-\-\-\-+ Updates /\-\-\-\-\-\-\-\-\-\e
| | <\-\-\-\-\-\-\-\-\-\-\- / \e
| Device | | Cluster |
| | \e /
+\-\-\-\-\-\-\-\-\-\-\-\-+ \e\-\-\-\-\-\-\-\-\-/
.ft P
.fi
.UNINDENT
.UNINDENT
.SH DELTA INDEX EXCHANGE
.sp
Index data must be exchanged whenever two devices connect so that one knows
the files available on the other. In the most basic case this happens by way
of sending an \fBIndex\fP message followed by one or more \fBIndex Update\fP
messages. Any previous index data known for a remote device is removed and
replaced with the new index data received in an \fBIndex\fP message, while the
contents of an \fBIndex Update\fP message is simply added to the existing
index data.
.sp
For situations with large indexes or frequent reconnects this can be quite
inefficient. A mechanism can then be used to retain index data between
connections and only transmit any changes since that data on connection
start. This is called “delta indexes”. To enable this mechanism the
\fBsequence\fP and \fBindex ID\fP fields are used.
.INDENT 0.0
.TP
.B Sequence:
Each index item (i.e., file, directory or symlink) has a sequence number
field. It contains the value of a counter at the time the index item was
updated. The counter increments by one for each change. That is, as files
are scanned and added to the index they get assigned sequence numbers
1, 2, 3 and so on. The next file to be changed or detected gets sequence
number 4, and future updates continue in the same fashion.
.TP
.B Index ID:
Each folder has an Index ID. This is a 64 bit random identifier set at
index creation time.
.UNINDENT
.sp
Given the above, we know that the tuple {index ID, maximum sequence number}
uniquely identifies a point in time of a given index. Any further changes
will increase the sequence number of some item, and thus the maximum
sequence number for the index itself. Should the index be reset or removed
(i.e., the sequence number reset to zero), a new index ID must be generated.
.sp
By letting a device know the {index ID, maximum sequence number} we have for
their index data, that device can arrange to only transmit \fBIndex Update\fP
messages for items with a higher sequence number. This is the delta index
mechanism.
.sp
The index ID and maximum sequence number known for each device is
transmitted in the \fBCluster Config\fP message at connection start.
.sp
For this mechanism to be reliable it is essential that outgoing index
information is ordered by increasing sequence number. Devices announcing a
non\-zero index ID in the \fBCluster Config\fP message MUST send all index data
ordered by increasing sequence number. Devices not intending to participate
in delta index exchange MUST send a zero index ID or, equivalently, not send
the \fBindex_id\fP attribute at all.
.SH MESSAGE LIMITS
.sp
An implementation MAY impose reasonable limits on the length of messages and
message fields to aid robustness in the face of corruption or broken
implementations. An implementation should strive to keep messages short
and to the point, favouring more and smaller messages over fewer and larger.
For example, favour a smaller Index message followed by one or more Index
Update messages rather than sending a very large Index message.
.sp
The Syncthing implementation imposes a hard limit of 500,000,000 bytes on
all messages. Attempting to send or receive a larger message will result in
a connection close. This size was chosen to accommodate Index messages
containing a large block list. It’s intended that the limit may be further
reduced in a future protocol update supporting variable block sizes (and
thus shorter block lists for large files).
.SH SELECTION OF BLOCK SIZE
.sp
The desired block size for any given file is the smallest block size that
results in fewer than 2000 blocks, or the maximum block size for larger
files. This rule results in the following table of block sizes per file
size:
.TS
center;
|l|l|.
_
T{
File Size
T} T{
Block Size
T}
_
T{
0 \- 250 MiB
T} T{
128 KiB
T}
_
T{
250 MiB \- 500 MiB
T} T{
256 KiB
T}
_
T{
500 MiB \- 1 GiB
T} T{
512 KiB
T}
_
T{
1 GiB \- 2 GiB
T} T{
1 MiB
T}
_
T{
2 GiB \- 4 GiB
T} T{
2 MiB
T}
_
T{
4 GiB \- 8 GiB
T} T{
4 MiB
T}
_
T{
8 GiB \- 16 GiB
T} T{
8 MiB
T}
_
T{
16 GiB \- up
T} T{
16 MiB
T}
_
.TE
.sp
An implementation MAY deviate from the block size rule when there is good
reason to do so. For example, if a file has been indexed at a certain block
size and grows beyond 2000 blocks it may be retained at the current block
size for practical reasons. When there is no overriding reason to the
contrary, such as when indexing a new file for the first time, the block
size rule above SHOULD be followed.
.sp
An implementation MUST therefore accept files with a block size differing
from the above rule. This does not mean that arbitrary block sizes are
allowed. The block size used MUST be exactly one of the power\-of\-two block
sizes listed in the table above.
.SH EXAMPLE EXCHANGE
.TS
center;
|l|l|l|.
_
T{
#
T} T{
A
T} T{
B
T}
_
T{
1
T} T{
ClusterConfiguration\->
T} T{
<\-ClusterConfiguration
T}
_
T{
2
T} T{
Index\->
T} T{
<\-Index
T}
_
T{
3
T} T{
IndexUpdate\->
T} T{
<\-IndexUpdate
T}
_
T{
4
T} T{
IndexUpdate\->
T} T{
T}
_
T{
5
T} T{
Request\->
T} T{
T}
_
T{
6
T} T{
Request\->
T} T{
T}
_
T{
7
T} T{
Request\->
T} T{
T}
_
T{
8
T} T{
Request\->
T} T{
T}
_
T{
9
T} T{
T} T{
<\-Response
T}
_
T{
10
T} T{
T} T{
<\-Response
T}
_
T{
11
T} T{
T} T{
<\-Response
T}
_
T{
12
T} T{
T} T{
<\-Response
T}
_
T{
13
T} T{
Index Update\->
T} T{
T}
_
T{
…
T} T{
T} T{
T}
_
T{
14
T} T{
T} T{
<\-Ping
T}
_
T{
15
T} T{
Ping\->
T} T{
T}
_
.TE
.sp
The connection is established and at 1. both peers send ClusterConfiguration
messages and then Index records. The Index records are received and both
peers recompute their knowledge of the data in the cluster. In this example,
peer A has four missing or outdated blocks. At 5 through 8 peer A sends
requests for these blocks. The requests are received by peer B, who
retrieves the data from the folder and transmits Response records (9 through
12). Device A updates their folder contents and transmits an Index Update
message (13). Both peers enter idle state after 13. At some later time 14,
the ping timer on device B expires and a Ping message is sent. The same
process occurs for device A at 15.
.SH EXAMPLES OF STRONG CIPHER SUITES
.TS
center;
|l|l|l|.
_
T{
ID
T} T{
Name
T} T{
Description
T}
_
T{
0x009F
T} T{
DHE\-RSA\-AES256\-GCM\-SHA384
T} T{
TLSv1.2 DH RSA AESGCM(256) AEAD
T}
_
T{
0x006B
T} T{
DHE\-RSA\-AES256\-SHA256
T} T{
TLSv1.2 DH RSA AES(256) SHA256
T}
_
T{
0xC030
T} T{
ECDHE\-RSA\-AES256\-GCM\-SHA384
T} T{
TLSv1.2 ECDH RSA AESGCM(256) AEAD
T}
_
T{
0xC028
T} T{
ECDHE\-RSA\-AES256\-SHA384
T} T{
TLSv1.2 ECDH RSA AES(256) SHA384
T}
_
T{
0x009E
T} T{
DHE\-RSA\-AES128\-GCM\-SHA256
T} T{
TLSv1.2 DH RSA AESGCM(128) AEAD
T}
_
T{
0x0067
T} T{
DHE\-RSA\-AES128\-SHA256
T} T{
TLSv1.2 DH RSA AES(128) SHA256
T}
_
T{
0xC02F
T} T{
ECDHE\-RSA\-AES128\-GCM\-SHA256
T} T{
TLSv1.2 ECDH RSA AESGCM(128) AEAD
T}
_
T{
0xC027
T} T{
ECDHE\-RSA\-AES128\-SHA256
T} T{
TLSv1.2 ECDH RSA AES(128) SHA256
T}
_
.TE
.SH AUTHOR
The Syncthing Authors
.SH COPYRIGHT
2014-2019, The Syncthing Authors
.\" Generated by docutils manpage writer.
.
Reference in New Issue View Git Blame Copy Permalink