wireguard-install/wireguard-install.sh

#!/bin/bash

# Secure WireGuard server installer
# https://github.com/angristan/wireguard-install

RED='\033[0;31m'
ORANGE='\033[0;33m'
GREEN='\033[0;32m'
NC='\033[0m'

function isRoot() {
	if [ "${EUID}" -ne 0 ]; then
		echo "You need to run this script as root"
		exit 1
	fi
}

function checkVirt() {
	if [ "$(systemd-detect-virt)" == "openvz" ]; then
		echo "OpenVZ is not supported"
		exit 1
	fi

	if [ "$(systemd-detect-virt)" == "lxc" ]; then
		echo "LXC is not supported (yet)."
		echo "WireGuard can technically run in an LXC container,"
		echo "but the kernel module has to be installed on the host,"
		echo "the container has to be run with some specific parameters"
		echo "and only the tools need to be installed in the container."
		exit 1
	fi
}

function checkOS() {
	source /etc/os-release
	OS="${ID}"
	if [[ ${OS} == "debian" || ${OS} == "raspbian" ]]; then
		if [[ ${VERSION_ID} -lt 10 ]]; then
			echo "Your version of Debian (${VERSION_ID}) is not supported. Please use Debian 10 Buster or later"
			exit 1
		fi
		OS=debian # overwrite if raspbian
	elif [[ ${OS} == "ubuntu" ]]; then
		RELEASE_YEAR=$(echo "${VERSION_ID}" | cut -d'.' -f1)
		if [[ ${RELEASE_YEAR} -lt 18 ]]; then
			echo "Your version of Ubuntu (${VERSION_ID}) is not supported. Please use Ubuntu 18.04 or later"
			exit 1
		fi
	elif [[ ${OS} == "fedora" ]]; then
		if [[ ${VERSION_ID} -lt 32 ]]; then
			echo "Your version of Fedora (${VERSION_ID}) is not supported. Please use Fedora 32 or later"
			exit 1
		fi
	elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
		if [[ ${VERSION_ID} == 7* ]]; then
			echo "Your version of CentOS (${VERSION_ID}) is not supported. Please use CentOS 8 or later"
			exit 1
		fi
	elif [[ -e /etc/oracle-release ]]; then
		source /etc/os-release
		OS=oracle
	elif [[ -e /etc/arch-release ]]; then
		OS=arch
	else
		echo "Looks like you aren't running this installer on a Debian, Ubuntu, Fedora, CentOS, AlmaLinux, Oracle or Arch Linux system"
		exit 1
	fi
}

function getHomeDirForClient() {
	local CLIENT_NAME=$1

	if [ -z "${CLIENT_NAME}" ]; then
		echo "Error: getHomeDirForClient() requires a client name as argument"
		exit 1
	fi

	# Home directory of the user, where the client configuration will be written
	if [ -e "/home/${CLIENT_NAME}" ]; then
		# if $1 is a user name
		HOME_DIR="/home/${CLIENT_NAME}"
	elif [ "${SUDO_USER}" ]; then
		# if not, use SUDO_USER
		if [ "${SUDO_USER}" == "root" ]; then
			# If running sudo as root
			HOME_DIR="/root"
		else
			HOME_DIR="/home/${SUDO_USER}"
		fi
	else
		# if not SUDO_USER, use /root
		HOME_DIR="/root"
	fi

	echo "$HOME_DIR"
}

function initialCheck() {
	isRoot
	checkVirt
	checkOS
}

function installQuestions() {
	echo "Welcome to the WireGuard installer!"
	echo "The git repository is available at: https://github.com/angristan/wireguard-install"
	echo ""
	echo "I need to ask you a few questions before starting the setup."
	echo "You can keep the default options and just press enter if you are ok with them."
	echo ""

	# Detect public IPv4 or IPv6 address and pre-fill for the user
	SERVER_PUB_IP=$(ip -4 addr | sed -ne 's|^.* inet \([^/]*\)/.* scope global.*$|\1|p' | awk '{print $1}' | head -1)
	if [[ -z ${SERVER_PUB_IP} ]]; then
		# Detect public IPv6 address
		SERVER_PUB_IP=$(ip -6 addr | sed -ne 's|^.* inet6 \([^/]*\)/.* scope global.*$|\1|p' | head -1)
	fi
	read -rp "IPv4 or IPv6 public address: " -e -i "${SERVER_PUB_IP}" SERVER_PUB_IP

	# Detect public interface and pre-fill for the user
	SERVER_NIC="$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)' | head -1)"
	until [[ ${SERVER_PUB_NIC} =~ ^[a-zA-Z0-9_]+$ ]]; do
		read -rp "Public interface: " -e -i "${SERVER_NIC}" SERVER_PUB_NIC
	done

	until [[ ${SERVER_WG_NIC} =~ ^[a-zA-Z0-9_]+$ && ${#SERVER_WG_NIC} -lt 16 ]]; do
		read -rp "WireGuard interface name: " -e -i wg0 SERVER_WG_NIC
	done

	until [[ ${SERVER_WG_IPV4} =~ ^([0-9]{1,3}\.){3} ]]; do
		read -rp "Server WireGuard IPv4: " -e -i 10.66.66.1 SERVER_WG_IPV4
	done

	until [[ ${SERVER_WG_IPV6} =~ ^([a-f0-9]{1,4}:){3,4}: ]]; do
		read -rp "Server WireGuard IPv6: " -e -i fd42:42:42::1 SERVER_WG_IPV6
	done

	# Generate random number within private ports range
	RANDOM_PORT=$(shuf -i49152-65535 -n1)
	until [[ ${SERVER_PORT} =~ ^[0-9]+$ ]] && [ "${SERVER_PORT}" -ge 1 ] && [ "${SERVER_PORT}" -le 65535 ]; do
		read -rp "Server WireGuard port [1-65535]: " -e -i "${RANDOM_PORT}" SERVER_PORT
	done

	# Adguard DNS by default
	until [[ ${CLIENT_DNS_1} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
		read -rp "First DNS resolver to use for the clients: " -e -i 1.1.1.1 CLIENT_DNS_1
	done
	until [[ ${CLIENT_DNS_2} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
		read -rp "Second DNS resolver to use for the clients (optional): " -e -i 1.0.0.1 CLIENT_DNS_2
		if [[ ${CLIENT_DNS_2} == "" ]]; then
			CLIENT_DNS_2="${CLIENT_DNS_1}"
		fi
	done

	until [[ ${ALLOWED_IPS} =~ ^.+$ ]]; do
		echo -e "\nWireGuard uses a parameter called AllowedIPs to determine what is routed over the VPN."
		read -rp "Allowed IPs list for generated clients (leave default to route everything): " -e -i '0.0.0.0/0,::/0' ALLOWED_IPS
		if [[ ${ALLOWED_IPS} == "" ]]; then
			ALLOWED_IPS="0.0.0.0/0,::/0"
		fi
	done

	until [[ ${ISOLATE_CLIENTS} =~ y|n ]]; do
		read -rp "Do you want to isolate clients from each other? [y/n]: " -e -i "n" ISOLATE_CLIENTS
	done

	echo ""
	echo "Okay, that was all I needed. We are ready to setup your WireGuard server now."
	echo "You will be able to generate a client at the end of the installation."
	read -n1 -r -p "Press any key to continue..."
}

function installWireGuard() {
	# Run setup questions first
	installQuestions

	# Install WireGuard tools and module
	if [[ ${OS} == 'ubuntu' ]] || [[ ${OS} == 'debian' && ${VERSION_ID} -gt 10 ]]; then
		apt-get update
		apt-get install -y wireguard iptables resolvconf qrencode
	elif [[ ${OS} == 'debian' ]]; then
		if ! grep -rqs "^deb .* buster-backports" /etc/apt/; then
			echo "deb http://deb.debian.org/debian buster-backports main" >/etc/apt/sources.list.d/backports.list
			apt-get update
		fi
		apt update
		apt-get install -y iptables resolvconf qrencode
		apt-get install -y -t buster-backports wireguard
	elif [[ ${OS} == 'fedora' ]]; then
		if [[ ${VERSION_ID} -lt 32 ]]; then
			dnf install -y dnf-plugins-core
			dnf copr enable -y jdoss/wireguard
			dnf install -y wireguard-dkms
		fi
		dnf install -y wireguard-tools iptables qrencode
	elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
		if [[ ${VERSION_ID} == 8* ]]; then
			yum install -y epel-release elrepo-release
			yum install -y kmod-wireguard
			yum install -y qrencode # not available on release 9
		fi
		yum install -y wireguard-tools iptables
	elif [[ ${OS} == 'oracle' ]]; then
		dnf install -y oraclelinux-developer-release-el8
		dnf config-manager --disable -y ol8_developer
		dnf config-manager --enable -y ol8_developer_UEKR6
		dnf config-manager --save -y --setopt=ol8_developer_UEKR6.includepkgs='wireguard-tools*'
		dnf install -y wireguard-tools qrencode iptables
	elif [[ ${OS} == 'arch' ]]; then
		pacman -S --needed --noconfirm wireguard-tools qrencode
	fi

	# Make sure the directory exists (this does not seem the be the case on fedora)
	mkdir /etc/wireguard >/dev/null 2>&1

	chmod 600 -R /etc/wireguard/

	SERVER_PRIV_KEY=$(wg genkey)
	SERVER_PUB_KEY=$(echo "${SERVER_PRIV_KEY}" | wg pubkey)

	# Save WireGuard settings
	echo "SERVER_PUB_IP=${SERVER_PUB_IP}
SERVER_PUB_NIC=${SERVER_PUB_NIC}
SERVER_WG_NIC=${SERVER_WG_NIC}
SERVER_WG_IPV4=${SERVER_WG_IPV4}
SERVER_WG_IPV6=${SERVER_WG_IPV6}
SERVER_PORT=${SERVER_PORT}
SERVER_PRIV_KEY=${SERVER_PRIV_KEY}
SERVER_PUB_KEY=${SERVER_PUB_KEY}
CLIENT_DNS_1=${CLIENT_DNS_1}
CLIENT_DNS_2=${CLIENT_DNS_2}
ALLOWED_IPS=${ALLOWED_IPS}" >/etc/wireguard/params

	# Add server interface
	echo "[Interface]
Address = ${SERVER_WG_IPV4}/24,${SERVER_WG_IPV6}/64
ListenPort = ${SERVER_PORT}
PrivateKey = ${SERVER_PRIV_KEY}" >"/etc/wireguard/${SERVER_WG_NIC}.conf"

	if pgrep firewalld; then
		FIREWALLD_IPV4_ADDRESS=$(echo "${SERVER_WG_IPV4}" | cut -d"." -f1-3)".0"
		FIREWALLD_IPV6_ADDRESS=$(echo "${SERVER_WG_IPV6}" | sed 's/:[^:]*$/:0/')
		echo "PostUp = firewall-cmd --add-port ${SERVER_PORT}/udp && firewall-cmd --add-rich-rule='rule family=ipv4 source address=${FIREWALLD_IPV4_ADDRESS}/24 masquerade' && firewall-cmd --add-rich-rule='rule family=ipv6 source address=${FIREWALLD_IPV6_ADDRESS}/24 masquerade'" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"

		if [[ $ISOLATE_CLIENTS == 'y' ]]; then
			echo "PostUp = iptables -I FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT
PostUp = ip6tables -I FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
		fi

		echo "PostDown = firewall-cmd --remove-port ${SERVER_PORT}/udp && firewall-cmd --remove-rich-rule='rule family=ipv4 source address=${FIREWALLD_IPV4_ADDRESS}/24 masquerade' && firewall-cmd --remove-rich-rule='rule family=ipv6 source address=${FIREWALLD_IPV6_ADDRESS}/24 masquerade'" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"

		if [[ $ISOLATE_CLIENTS == 'y' ]]; then
			echo "PostDown = iptables -D FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT
PostDown = ip6tables -D FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
		fi
	else
		echo "PostUp = iptables -I INPUT -p udp --dport ${SERVER_PORT} -j ACCEPT
PostUp = iptables -I FORWARD -i ${SERVER_PUB_NIC} -o ${SERVER_WG_NIC} -j ACCEPT
PostUp = iptables -I FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
PostUp = iptables -t nat -A POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"

		if [[ $ISOLATE_CLIENTS == 'y' ]]; then
			echo "PostUp = iptables -I FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT
PostUp = ip6tables -I FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
		fi

		echo "PostUp = ip6tables -I FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
PostUp = ip6tables -t nat -A POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE
PostDown = iptables -D INPUT -p udp --dport ${SERVER_PORT} -j ACCEPT
PostDown = iptables -D FORWARD -i ${SERVER_PUB_NIC} -o ${SERVER_WG_NIC} -j ACCEPT
PostDown = iptables -D FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
PostDown = iptables -t nat -D POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"

		if [[ $ISOLATE_CLIENTS == 'y' ]]; then
			echo "PostDown = iptables -D FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT
PostDown = ip6tables -D FORWARD -i ${SERVER_WG_NIC} -o ${SERVER_WG_NIC} -j REJECT" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
		fi

		echo "PostDown = ip6tables -D FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
PostDown = ip6tables -t nat -D POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
	fi

	# Enable routing on the server
	echo "net.ipv4.ip_forward = 1
net.ipv6.conf.all.forwarding = 1" >/etc/sysctl.d/wg.conf

	sysctl --system

	systemctl start "wg-quick@${SERVER_WG_NIC}"
	systemctl enable "wg-quick@${SERVER_WG_NIC}"

	newClient
	echo -e "${GREEN}If you want to add more clients, you simply need to run this script another time!${NC}"

	# Check if WireGuard is running
	systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
	WG_RUNNING=$?

	# WireGuard might not work if we updated the kernel. Tell the user to reboot
	if [[ ${WG_RUNNING} -ne 0 ]]; then
		echo -e "\n${RED}WARNING: WireGuard does not seem to be running.${NC}"
		echo -e "${ORANGE}You can check if WireGuard is running with: systemctl status wg-quick@${SERVER_WG_NIC}${NC}"
		echo -e "${ORANGE}If you get something like \"Cannot find device ${SERVER_WG_NIC}\", please reboot!${NC}"
	else # WireGuard is running
		echo -e "\n${GREEN}WireGuard is running.${NC}"
		echo -e "${GREEN}You can check the status of WireGuard with: systemctl status wg-quick@${SERVER_WG_NIC}\n\n${NC}"
		echo -e "${ORANGE}If you don't have internet connectivity from your client, try to reboot the server.${NC}"
	fi
}

function newClient() {
	# If SERVER_PUB_IP is IPv6, add brackets if missing
	if [[ ${SERVER_PUB_IP} =~ .*:.* ]]; then
		if [[ ${SERVER_PUB_IP} != *"["* ]] || [[ ${SERVER_PUB_IP} != *"]"* ]]; then
			SERVER_PUB_IP="[${SERVER_PUB_IP}]"
		fi
	fi
	ENDPOINT="${SERVER_PUB_IP}:${SERVER_PORT}"

	echo ""
	echo "Client configuration"
	echo ""
	echo "The client name must consist of alphanumeric character(s). It may also include underscores or dashes and can't exceed 15 chars."

	until [[ ${CLIENT_NAME} =~ ^[a-zA-Z0-9_-]+$ && ${CLIENT_EXISTS} == '0' && ${#CLIENT_NAME} -lt 16 ]]; do
		read -rp "Client name: " -e CLIENT_NAME
		CLIENT_EXISTS=$(grep -c -E "^### Client ${CLIENT_NAME}\$" "/etc/wireguard/${SERVER_WG_NIC}.conf")

		if [[ ${CLIENT_EXISTS} != 0 ]]; then
			echo ""
			echo -e "${ORANGE}A client with the specified name was already created, please choose another name.${NC}"
			echo ""
		fi
	done

	for DOT_IP in {2..254}; do
		DOT_EXISTS=$(grep -c "${SERVER_WG_IPV4::-1}${DOT_IP}" "/etc/wireguard/${SERVER_WG_NIC}.conf")
		if [[ ${DOT_EXISTS} == '0' ]]; then
			break
		fi
	done

	if [[ ${DOT_EXISTS} == '1' ]]; then
		echo ""
		echo "The subnet configured supports only 253 clients."
		exit 1
	fi

	BASE_IP=$(echo "$SERVER_WG_IPV4" | awk -F '.' '{ print $1"."$2"."$3 }')
	until [[ ${IPV4_EXISTS} == '0' ]]; do
		read -rp "Client WireGuard IPv4: ${BASE_IP}." -e -i "${DOT_IP}" DOT_IP
		CLIENT_WG_IPV4="${BASE_IP}.${DOT_IP}"
		IPV4_EXISTS=$(grep -c "$CLIENT_WG_IPV4/32" "/etc/wireguard/${SERVER_WG_NIC}.conf")

		if [[ ${IPV4_EXISTS} != 0 ]]; then
			echo ""
			echo -e "${ORANGE}A client with the specified IPv4 was already created, please choose another IPv4.${NC}"
			echo ""
		fi
	done

	BASE_IP=$(echo "$SERVER_WG_IPV6" | awk -F '::' '{ print $1 }')
	until [[ ${IPV6_EXISTS} == '0' ]]; do
		read -rp "Client WireGuard IPv6: ${BASE_IP}::" -e -i "${DOT_IP}" DOT_IP
		CLIENT_WG_IPV6="${BASE_IP}::${DOT_IP}"
		IPV6_EXISTS=$(grep -c "${CLIENT_WG_IPV6}/128" "/etc/wireguard/${SERVER_WG_NIC}.conf")

		if [[ ${IPV6_EXISTS} != 0 ]]; then
			echo ""
			echo -e "${ORANGE}A client with the specified IPv6 was already created, please choose another IPv6.${NC}"
			echo ""
		fi
	done

	# Generate key pair for the client
	CLIENT_PRIV_KEY=$(wg genkey)
	CLIENT_PUB_KEY=$(echo "${CLIENT_PRIV_KEY}" | wg pubkey)
	CLIENT_PRE_SHARED_KEY=$(wg genpsk)

	HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")

	# Create client file and add the server as a peer
	echo "[Interface]
PrivateKey = ${CLIENT_PRIV_KEY}
Address = ${CLIENT_WG_IPV4}/32,${CLIENT_WG_IPV6}/128
DNS = ${CLIENT_DNS_1},${CLIENT_DNS_2}

[Peer]
PublicKey = ${SERVER_PUB_KEY}
PresharedKey = ${CLIENT_PRE_SHARED_KEY}
Endpoint = ${ENDPOINT}
AllowedIPs = ${ALLOWED_IPS}" >"${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"

	# Add the client as a peer to the server
	echo -e "\n### Client ${CLIENT_NAME}
[Peer]
PublicKey = ${CLIENT_PUB_KEY}
PresharedKey = ${CLIENT_PRE_SHARED_KEY}
AllowedIPs = ${CLIENT_WG_IPV4}/32,${CLIENT_WG_IPV6}/128" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"

	wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")

	# Generate QR code if qrencode is installed
	if command -v qrencode &>/dev/null; then
		echo -e "${GREEN}\nHere is your client config file as a QR Code:\n${NC}"
		qrencode -t ansiutf8 -l L <"${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
		echo ""
	fi

	echo -e "${GREEN}Your client config file is in ${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf${NC}"
}

function listClients() {
	NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
	if [[ ${NUMBER_OF_CLIENTS} -eq 0 ]]; then
		echo ""
		echo "You have no existing clients!"
		exit 1
	fi

	grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
}

function revokeClient() {
	NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
	if [[ ${NUMBER_OF_CLIENTS} == '0' ]]; then
		echo ""
		echo "You have no existing clients!"
		exit 1
	fi

	echo ""
	echo "Select the existing client you want to revoke"
	grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
	until [[ ${CLIENT_NUMBER} -ge 1 && ${CLIENT_NUMBER} -le ${NUMBER_OF_CLIENTS} ]]; do
		if [[ ${CLIENT_NUMBER} == '1' ]]; then
			read -rp "Select one client [1]: " CLIENT_NUMBER
		else
			read -rp "Select one client [1-${NUMBER_OF_CLIENTS}]: " CLIENT_NUMBER
		fi
	done

	# match the selected number to a client name
	CLIENT_NAME=$(grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | sed -n "${CLIENT_NUMBER}"p)

	# remove [Peer] block matching $CLIENT_NAME
	sed -i "/^### Client ${CLIENT_NAME}\$/,/^$/d" "/etc/wireguard/${SERVER_WG_NIC}.conf"

	# remove generated client file
	HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")
	rm -f "${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"

	# restart wireguard to apply changes
	wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")
}

function uninstallWg() {
	echo ""
	echo -e "\n${RED}WARNING: This will uninstall WireGuard and remove all the configuration files!${NC}"
	echo -e "${ORANGE}Please backup the /etc/wireguard directory if you want to keep your configuration files.\n${NC}"
	read -rp "Do you really want to remove WireGuard? [y/n]: " -e REMOVE
	REMOVE=${REMOVE:-n}
	if [[ $REMOVE == 'y' ]]; then
		checkOS

		systemctl stop "wg-quick@${SERVER_WG_NIC}"
		systemctl disable "wg-quick@${SERVER_WG_NIC}"

		if [[ ${OS} == 'ubuntu' ]]; then
			apt-get remove -y wireguard wireguard-tools qrencode
		elif [[ ${OS} == 'debian' ]]; then
			apt-get remove -y wireguard wireguard-tools qrencode
		elif [[ ${OS} == 'fedora' ]]; then
			dnf remove -y --noautoremove wireguard-tools qrencode
			if [[ ${VERSION_ID} -lt 32 ]]; then
				dnf remove -y --noautoremove wireguard-dkms
				dnf copr disable -y jdoss/wireguard
			fi
		elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
			yum remove -y --noautoremove wireguard-tools
			if [[ ${VERSION_ID} == 8* ]]; then
				yum remove --noautoremove kmod-wireguard qrencode
			fi
		elif [[ ${OS} == 'oracle' ]]; then
			yum remove --noautoremove wireguard-tools qrencode
		elif [[ ${OS} == 'arch' ]]; then
			pacman -Rs --noconfirm wireguard-tools qrencode
		fi

		rm -rf /etc/wireguard
		rm -f /etc/sysctl.d/wg.conf

		# Reload sysctl
		sysctl --system

		# Check if WireGuard is running
		systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
		WG_RUNNING=$?

		if [[ ${WG_RUNNING} -eq 0 ]]; then
			echo "WireGuard failed to uninstall properly."
			exit 1
		else
			echo "WireGuard uninstalled successfully."
			exit 0
		fi
	else
		echo ""
		echo "Removal aborted!"
	fi
}

function manageMenu() {
	echo "Welcome to WireGuard-install!"
	echo "The git repository is available at: https://github.com/angristan/wireguard-install"
	echo ""
	echo "It looks like WireGuard is already installed."
	echo ""
	echo "What do you want to do?"
	echo "   1) Add a new user"
	echo "   2) List all users"
	echo "   3) Revoke existing user"
	echo "   4) Uninstall WireGuard"
	echo "   5) Exit"
	until [[ ${MENU_OPTION} =~ ^[1-5]$ ]]; do
		read -rp "Select an option [1-5]: " MENU_OPTION
	done
	case "${MENU_OPTION}" in
	1)
		newClient
		;;
	2)
		listClients
		;;
	3)
		revokeClient
		;;
	4)
		uninstallWg
		;;
	5)
		exit 0
		;;
	esac
}

# Check for root, virt, OS...
initialCheck

# Check if WireGuard is already installed and load params
if [[ -e /etc/wireguard/params ]]; then
	source /etc/wireguard/params
	manageMenu
else
	installWireGuard
fi