Download, parse and display METAR data from the NWS.
icao must be a valid icao for the required location
(see for instance https://pilotweb.nas.faa.gov/qryhtml/icao/).
data_type must be one of the following:
last_update : display the date (yyyy/mm/dd) and time (UTC)
of the last update.
temperature_C : display air temperature in degree Celsius.
temperature_F : display air temperature in degree Fahrenheit.
cloud_cover : display the highest cloud cover status.
pressure : display air pressure in millibar.
wind_speed : display wind speed in km/hour.
wind_dir : display wind direction.
wind_dir_DEG : display compass wind direction.
humidity : display relative humidity in %.
weather : display any relevant weather event (rain, snow, etc.).
delay_in_minutes (optional, default 30) cannot be lower than 30 min.
Up to 3 stations can be simultaneously queried.
Use --enable-weather to compile this in.
Most MPD clients read the MPD_HOST and MPD_PORT
environment variables. Now, conky will too.
MPD_HOST can be either "hostname" or "password@hostname".
If a user specifies a host in the configuration, the
password set in MPD_HOST will be ignored. This is to
prevent the password from being sent to the wrong host.
In other words, if the host is specified in the conky
configuration, the password must be too (if there is
one).
Signed-off-by: Brenden Matthews <brenden@rty.ca>
The panel type reserves space along the edge of the
screen, just like regular DE panels, taskbars and the
like. I have tested it for several hours now with lots
of different settings, and it seems to be working fine.
Works especially well with alignment top_??? or
bottom_??? and single-line output. Something like
this:
own_window yes
own_window_type panel
alignment bottom_left
maximum_width 1680
minimum_size 1680
gap_x 0
gap_y 0
stippled_borders 1
draw_borders yes
update_interval 3.0
TEXT
$nodename $tab $freq_g ${color grey}GHz$color $tab $memperc% ${color grey}RAM$color $tab $cpu% ${color grey}CPU $tab etc...etc...$alignr${time %F %R}
The line after TEXT is supposed to be on one line,
just in case some channel has messed it up.
Signed-off-by: Brenden Matthews <brenden@rty.ca>
One useless "if (own_window)" check was removed. It is already inside another
identical check, and so will always evaluate to true.
One strncmp against the word "dock" was limited to four characters instead of
seven, for consistency with the other checks in the configuration parsing code.
Signed-off-by: Brenden Matthews <brenden@rty.ca>
Basically, I just added three new process properties (io_read, io_write, io_perc - representing
the amount of I/O done by the process during the update interval) and $top_io, that sorts
processes based on io_perc.
Atm, it's completely #ifdef'd, since it requires kernel support. But that creates some wierd
looking syntax at some places, so it may be better to remove some ifdefs. It even may be
possible to completely remove the ifdefs (ie. convert them to #ifdef linux) since the code will
compile just fine even if the kernel doesn't support I/O accounting. I'll leave that for someone
else to decide.