qpdf/ChangeLog

2013-11-29  Jay Berkenbilt  <ejb@ql.org>

	* Add missing #include <algorithm> in some files that use std::min
	and std::max.

2013-11-21  Jay Berkenbilt  <ejb@ql.org>

	* Change image comparison tests, which are disabled by default, to
	use tiff files with 8 bits per sample rather than 4.  This works
	around a bug in tiffcmp but also increases time and disk space for
	image comparison tests.

2013-10-28  Jay Berkenbilt  <ejb@ql.org>

	* Fix MacOS compilation errors by adding a missing #include in a
	header file.

2013-10-18  Jay Berkenbilt  <ejb@ql.org>

	* 5.0.1: release

	* Warn when -accessibility=n is specified with a modern encryption
	format (R > 3).  Also, accept this flag (and ignore with warning)
	with 256-bit encryption.  qpdf has always ignored the
	accessibility setting with R > 3, but it previously did so
	silently.

2013-10-05  Jay Berkenbilt  <ejb@ql.org>

	* Replace operator[] in std::string and std::vector with "at" in
	order to get bounds checking.  This reduces the chances that
	incorrect code will result in data exposure or buffer overruns.
	See README.hardening for additional notes.

	* Use cryptographically secure random number generation when
	available.  See additional notes in README.

	* Replace some assert() calls with std::logic_error exceptions.
	Ideally there shouldn't be assert() calls outside of testing.
	This change may make a few more potential code errors in handling
	invalid data recoverable.

	* Security fix: In places where std::vector<T>(size_t) was used,
	either validate that the size parameter is sane or refactor code
	to avoid the need to pre-allocate the vector.  This reduces the
	likelihood of allocating a lot of memory in response to invalid
	data in linearization hint streams.

	* Security fix: sanitize /W array in cross reference stream to
	avoid a potential integer overflow in a multiplication.  It is
	unlikely that any exploits were possible from this bug as
	additional checks were also performed.

	* Security fix: avoid buffer overrun that could be caused by bogus
	data in linearization hint streams.  The incorrect code could only
	be triggered when checking linearization data, which must be
	invoked explicitly.  qpdf does not check linearization data when
	reading or writing linearized files, but the qpdf --check command
	does check linearization data.

	* Security fix: properly handle empty strings in
	QPDF_Name::normalizeName.  The empty string is not a valid name
	and would never be parsed as a name, so there were no known
	conditions where this method could be called with an empty string.

	* Security fix: perform additional argument sanity checks when
	reading bit streams.

	* Security fix: in QUtil::toUTF8, change bounds checking to avoid
	having a pointer point temporarily outside the bounds of an
	array.  Some compiler optimizations could have made the original
	code unsafe.

2013-07-10  Jay Berkenbilt  <ejb@ql.org>

	* 5.0.0: release

	* 4.2.0 turned out to be binary incompatible on some platforms
	even though there were no changes to the public API.  Therefore
	the 4.2.0 release has been withdrawn, and is being replaced with a
	5.0.0 release that acknowledges the ABI change and also removes
	some problematic methods from the public API.

	* Remove methods from public API that were only intended to be
	used by QPDFWriter and really didn't make sense to call from
	anywhere else as they required internal knowledge that only
	QPDFWriter had:
	   - QPDF::getLinearizedParts
	   - QPDF::generateHintStream
	   - QPDF::getObjectStreamData
	   - QPDF::getCompressibleObjGens
	   - QPDF::getCompressibleObjects

2013-07-07  Jay Berkenbilt  <ejb@ql.org>

	* 4.2.0: release [withdrawn]

	* Ignore error case of a stream's decode parameters having invalid
	length when there are no stream filters.

	* qpdf: add --show-npages command-line option, which causes the
	number of pages in the input file to be printed on a line by
	itself.

	* qpdf: allow omission of range in --pages.  If range is omitted
	such that an argument that is supposed to be a range is an invalid
	range and a valid file name, the range of 1-z is assumed.  This
	makes it possible to merge a bunch of files with something like
	qpdf --empty out.pdf --pages *.pdf --

2013-06-15  Jay Berkenbilt  <ejb@ql.org>

	* Handle some additional broken files with missing /ID in trailer
	for encrypted files and with space rather than newline after xref.

2013-06-14  Jay Berkenbilt  <ejb@ql.org>

	* Detect and correct /Outlines dictionary being a direct object
	when linearizing files.  This is not allowed by the spec but has
	been seen in the wild.  Prior to this change, such a file would
	cause an internal error in the linearization code, which assumed
	/Outlines was indirect.

	* Add /Length key to crypt filter dictionary for encrypted files.
	This key is optional, but some version of MacOS reportedly fail to
	open encrypted PDF files without this key.

	* Bug fix: properly handle object stream generation when the
	original file has some compressible objects with generation != 0.

	* Add QPDF::getCompressibleObjGens() and deprecate
	QPDF::getCompressibleObjects(), which had a flaw in its logic.

	* Add new QPDFObjectHandle::getObjGen() method and indiciate in
	comments that its use is favored over getObjectID() and
	getGeneration() for most cases.

	* Add new QPDFObjGen object to represent an object ID/generation
	pair.

2013-04-14  Jay Berkenbilt  <ejb@ql.org>

	* 4.1.0: release

2013-03-25  Jay Berkenbilt  <ejb@ql.org>

	* manual/qpdf-manual.xml: Document the casting policy that is
	followed in qpdf's implementation.

2013-03-11  Jay Berkenbilt  <ejb@ql.org>

	* When creating Windows binary distributions, make sure to only
	copy DLLs of the correct type.  The ensures that the 32-bit
	distributions contain 32-bit DLLs and the 64-bit distributions
	contain 64-bit DLLs.

2013-03-07  Jay Berkenbilt  <ejb@ql.org>

	* Use ./install-sh (already present) instead of "install -c" to
	install executables to fix portability problems against different
	UNIX variants.

2013-03-03  Jay Berkenbilt  <ejb@ql.org>

	* Add protected terminateParsing method to
	QPDFObjectHandle::ParserCallbacks that implementor can call to
	terminate parsing of a content stream.

2013-02-28  Jay Berkenbilt  <ejb@ql.org>

	* Favor fopen_s and strerror_s on MSVC to avoid CRT security
	warnings.  This is useful for people who may want to use qpdf in
	an application that is Windows 8 certified.

	* New method QUtil::safe_fopen to wrap calls to fopen.  This is
	less cumbersome than calling QUtil::fopen_wrapper.

	* Remove all calls to sprintf

	* New method QUtil::int_to_string_base to convert to octal or
	hexademical (or decimal) strings without using sprintf

2013-02-26  Jay Berkenbilt  <ejb@ql.org>

	* Rewrite QUtil::int_to_string and QUtil::double_to_string to
	remove internal length limits but to remain backward compatible
	with the old versions for valid inputs.

2013-02-23  Jay Berkenbilt  <ejb@ql.org>

	* Bug fix: properly handle overridden compressed objects.  When
	caching objects from an object stream, only cache objects that,
	based on the xref table, would actually be resolved into this
	stream.  Prior to this fix, if an object stream A contained an
	object B that was overridden by an appended section of the file,
	qpdf would cache the old value of B if any non-overridden member
	of A was accessed before B.  This commit fixes that bug.

2013-01-31  Jay Berkenbilt  <ejb@ql.org>

	* Do not remove libtool's .la file during the make install step.
	Note to packagers: if your distribution wants to you remove the
	.la file, you will have to do that yourself now.

2013-01-25  Jay Berkenbilt  <ejb@ql.org>

	* New method QUtil::hex_encode to encode binary data as a
	hexadecimal string

	* qpdf --check was exiting with status 0 in some rare cases even
	when errors were found.  It now always exits with one of the
	document error codes (0 for success, 2 for errors, 3 or warnings).

2013-01-24  Jay Berkenbilt  <ejb@ql.org>

	* Make --enable-werror work for MSVC, and generally handle warning
	options better for that compiler.  Warning flags for that compiler
	were previous hard-coded into the build with /WX enabled
	unconditionally.

	* Split warning flags into WFLAGS in autoconf.mk to make them
	easier to override.  Before they were repeated in CFLAGS and
	CXXFLAGS and were commingled with other compiler flags.

	* qpdf --check now does syntactic checks all pages' content
	streams as well as checking overall document structure.  Semantic
	errors are still not checked, and there are no plans to add
	semantic checks.

2013-01-22  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::getTypeCode().  This method returns a
	unique integer (enumerated type) value corresponding to the object
	type of the QPDFObjectHandle.  It can be used as an alternative to
	the QPDFObjectHandle::is* methods for type testing, particularly
	where there is a desire to use a switch statement or optimize for
	performance when testing object types.

	* Add QPDFObjectHandle::getTypeName().  This method returns a
	string literal describing the object type.  It is useful for
	testing and debugging.

2013-01-20  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::parseContentStream, which parses the
	objects in a content stream and calls handlers in a callback
	class.  The example pdf-parse-content illustrates it use.

	* Add QPDF_Operator and QPDF_InlineImage types along with
	appropriate wrapper methods in QPDFObjectHandle.  These new object
	types are to facilitate content stream parsing.

2013-01-17  Jay Berkenbilt  <ejb@ql.org>

	* 4.0.1: release

	* Add clarifying comment in QPDF.hh for methods that return the
	user password to state that it is no longer possible with newer
	encryption formats to recover the user password knowing the owner
	password.

	* Fix detection of binary attachments in the test suite.  This
	resolves false test failures on some platforms.  No changes to the
	actual QPDF code were made.

2012-12-31  Jay Berkenbilt  <ejb@ql.org>

	* 4.0.0: release

	* Add new methods qpdf_get_pdf_extension_level,
	qpdf_set_r5_encryption_parameters,
	qpdf_set_r6_encryption_parameters,
	qpdf_set_minimum_pdf_version_and_extension, and
	qpdf_force_pdf_version_and_extension to support new functionality
	from the C API.

2012-12-30  Jay Berkenbilt  <ejb@ql.org>

	* Fix long-standing bug that could theoretically have resulted in
	possible misinterpretation of decode parameters in streams.  As
	far as I can tell, it is extremely unlikely that files with the
	characteristics that would have triggered the bug actually exist
	in cases that qpdf versions prior to 4.0.0 could have read.
	Unencrypted files with encrypted attachments would have triggered
	this bug, but qpdf versions prior to 4.0.0 already refused to open
	such files.

	* Fix long-standing bug in which a stream that used a crypt
	filter and was otherwise not filterable by qpdf would be decrypted
	properly but would retain the crypt filter indication in the
	file.  There are no known ways to create files like this, so it is
	unlikely that anyone ever hit this bug.

2012-12-29  Jay Berkenbilt  <ejb@ql.org>

	* Add read/write support for both the deprecated Acrobat IX
	encryption format and the Acrobat X/PDF 2.0 encryption format
	using 256-bit AES keys.  Using the Acrobat IX format (R=5) forces
	the version of the file to 1.7 with extension level 3.  Using the
	PDF 2.0 format (R=6) forces it to 1.7 extension level 8.

	* Add new method QPDF::getEncryptionKey to return the actual
	encryption key used for encryption of data in the file.  The key
	is returned as a std::string.

	* Non-compatible API change: change signature of
	QPDF::compute_data_key to take the R and V values from the
	encryption dictionary.  There is no reason for any application
	code to call this method since handling of encryption is done
	automatically by the qpdf libary.  It is used internally by
	QPDFWriter.

	* Support reading and decryption of files whose main text is not
	encrypted but whose attachments are.  More generally, support the
	case of files and streams encrypted differently with some
	limitations, described in the documentation.  This was not
	previously supported due to lack of test files, but I created test
	files using a trial version of Acrobat XI to fully implement this
	case.

	* Incorporate sha2 code from sphlib 3.0.  See README for
	licensing.  Create private pipeline class for computing hashes
	with sha256, sha384, and sha512.

	* Allow specification of initialization vector when using AES
	filtering.  This is required to compute the hash used in /R=6 (PDF
	2.0) encryption.

2012-12-28  Jay Berkenbilt  <ejb@ql.org>

	* Add random number generation functions to QUtil.

	* Fix old bug that could cause an infinite loop if user password
	recovery methods were called and a password contained the "("
	character (which happens to be the first byte of padding used by
	older PDF encryption formats).  This bug was noticed while reading
	code and would not happen under ordinary usage patterns even if
	the password contained that character.

2012-12-27  Jay Berkenbilt  <ejb@ql.org>

	* Add awareness of extension level to PDF Version methods for both
	reading and writing.  This includes adding method
	QPDF::getExtensionLevel and new versions of
	QPDFWriter::setMinimumPDFVersion and QPDFWriter::forcePDFVersion
	that support extension levels.  The qpdf command-line tool
	interprets version numbers of the form x.y.z as version x.y at
	extension level z.

	* Update AES classes to support use of 256-bit keys.

	* Non-compatible API change: Removed public method
	QPDF::flattenScalarReferences.  Instead, just flatten the scalar
	references we actually need to flatten.  Flattening scalar
	references was a wrong decision years ago and has occasionally
	caused other problems, among which were that it caused qpdf to
	visit otherwise unreferenced and possibly erroneous objects in the
	file when it didn't have to.  There's no reason that any
	non-internal code would have had to call this.

	* Non-compatible API change: Removed public method
	QPDF::decodeStreams which was previously used by qpdf --check but
	is no longer used.  The decodeStreams method could generate false
	positives since it would attempt to access all objects in the file
	including those that were not referenced.  There's no reason that
	any non-internal code would have had to call this.

	* Non-compatible API change: Removed public method
	QPDF::trimTrailerForWrite, which was only intended for use by
	QPDFWriter and which is no longer used.

2012-12-26  Jay Berkenbilt  <ejb@ql.org>

	* Add new fields to QPDF::EncryptionData to support newer
	encryption formats (V=5, R=5 and R=6)

	* Non-compatible API change: Change public nested class
	QPDF::EncryptionData to make all member fields private and to add
	method calls.  This is a non-compatible API change, but changing
	EncryptionData is necessary to support newer encryption formats,
	and making this change will prevent the need from making a
	non-compatible change in the future if new fields are added.  A
	public nested class should never have had public members to begin
	with.

2012-12-25  Jay Berkenbilt  <ejb@ql.org>

	* Allow PDF header to appear anywhere in the first 1024 bytes of
	the file as recommended in the implementation notes of the Adobe
	version of the PDF spec.

2012-11-20  Jay Berkenbilt  <ejb@ql.org>

	* Add zlib and libpcre to Requires.private in the pkg-config file
	to support static linking.  Thanks Tobias Hoffmann for pointing
	out the omission.

	* Ignore (with warning) non-freed objects in the xref table whose
	offset is 0.  Some PDF producers (incorrectly) do this.  See
	https://bugs.linuxfoundation.org/show_bug.cgi?id=1081.

2012-09-23  Jay Berkenbilt  <ejb@ql.org>

	* Add public methods QPDF::processInputSource and
	QPDFWriter::setOutputPipeline to allow users to read from custom
	input sources and to write to custom pipelines.  This allows the
	maximum flexibility in sources for reading and writing PDF files.

2012-09-06  Jay Berkenbilt  <ejb@ql.org>

	* 3.0.2: release

	* Add new method QPDFWriter::setExtraHeaderText to add extra text,
	such as application-specific comments, to near the beginning of a
	PDF file.  For linearized files, this appears after the
	linearization parameter dictionary.  For non-linearized files, it
	appears right after the PDF header and non-ASCII comment.

	* Make it possible to write the same QPDF object with two
	different QPDFWriter objects that have both called
	setLinearization(true) by making private method
	QPDF::calculateLinearizationData() properly initialize its state.

	* Bug fix: Writing after calling QPDFWriter::setOutputMemory()
	would cause a segmentation fault because of an internal field not
	being initialized, rendering that method useless.  This has been
	corrected.

2012-08-11  Jay Berkenbilt  <ejb@ql.org>

	* 3.0.1: release

	* Bug fix: let EOF terminate a literal token as well as
	whitespace or comments.

2012-07-31  Jay Berkenbilt  <ejb@ql.org>

	* 3.0.0: release

2012-07-29  Jay Berkenbilt  <ejb@ql.org>

	* 3.0.rc1: release

2012-07-25  Jay Berkenbilt  <ejb@ql.org>

	* From Tobias: add QPDFObjectHandle::replaceStreamData that takes
	a std::string analogous to the QPDFObjectHandle::newStream that
	takes a string that was added earlier.

2012-07-21  Jay Berkenbilt  <ejb@ql.org>

	* Change configure to have image comparison tests disabled by
	default.  Update README and README.maintainer with information
	about running them.

	* Add --pages command-line option to qpdf to enable page-based
	merging and splitting.

	* Add new method QPDFObjectHandle::replaceDict to replace a
	stream's dictionary.  Use with caution; see comments in
	QPDFObjectHandle.hh.

	* Add new method QPDFObjectHandle::parse for creation of
	QPDFObjectHandle objects from string representations of the
	objects.  Thanks to Tobias Hoffmann for the idea.

2012-07-15  Jay Berkenbilt  <ejb@ql.org>

	* add new QPDF::isEncrypted method that returns some additional
	information beyond other versions.

	* libqpdf/QPDFWriter.cc: fix copyEncryptionParameters to fix the
	minimum PDF version based on other file's encryption needs.  This
	is a fix to code added on 2012-07-14 and did not impact previously
	released code.

	* libqpdf/QPDFWriter.cc (copyEncryptionParameters): Bug fix: qpdf
	was not preserving whether or not AES encryption was being used
	when copying encryption parameters.  The file would still have
	been properly encrypted, but a file that started off encrypted
	with AES could have become encrypted with RC4.

2012-07-14  Jay Berkenbilt  <ejb@ql.org>

	* QPDFWriter: add public copyEncryptionParameters to allow copying
	encryption parameters from another file.

	* QPDFWriter: detect if the user has inserted an indirect object
	from another QPDF object and throw an exception directing the user
	to copyForeignObject.

2012-07-11  Jay Berkenbilt  <ejb@ql.org>

	* Added new APIs to copy objects from one QPDF to another.  This
	includes letting QPDF::addPage() (and QPDF::addPageAt()) accept a
	page object from another QPDF and adding
	QPDF::copyForeignObject().  See QPDF.hh for details.

	* Add method QPDFObjectHandle::getOwningQPDF() to return the QPDF
	object associated with an indirect QPDFObjectHandle.

	* Add convenience methods to QPDFObjectHandle: assertIndirect(),
	isPageObject(), isPagesObject()

	* Cache when QPDF::pushInheritedAttributesToPage() has been called
	to avoid traversing the pages trees multiple times.  This state is
	cleared by QPDF::updateAllPagesCache() and ignored by
	QPDF::flattenPagesTree().

2012-07-08  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::newReserved to create a reserved object
	and QPDF::replaceReserved to replace it with a real object.
	QPDFObjectHandle::newReserved reserves an object ID in a QPDF
	object and ensures that any references to it remain unresolved.
	When QPDF::replaceReserved is later called, previous references to
	the reserved object will properly resolve to the replaced object.

2012-07-07  Jay Berkenbilt  <ejb@ql.org>

	* NOTE: BREAKING API CHANGE.  Remove previously required length
	parameter from the version QPDFObjectHandle::replaceStreamData
	that uses a stream data provider.  Prior to qpdf 3.0.0, you had to
	compute the stream length in advance so that qpdf could internally
	verify that the stream data had the same length every time the
	provider was invoked.  Now this requirement is enforced a
	different way, and the length parameter is no longer required.
	Note that I take API-breaking changes very seriously and only did
	it in this case since the lack of need to know length in advance
	could significantly simplify people's code.  If you were
	previously going to a lot of trouble to compute the length of the
	new stream data in advance, you now no longer have to do that.
	You can just drop the length parameter and remove any code that
	was previously computing the length.  Thanks to Tobias Hoffmann
	for pointing out how annoying the original interface was.

2012-07-05  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFWriter methods to write to an already open stdio FILE*.
	Implementation and idea area based on contributions from Tobias
	Hoffmann.

2012-07-04  Jay Berkenbilt  <ejb@ql.org>

	* Accept changes from Tobias Hoffmann: add public method
	QPDF::pushInheritedAttributesToPage including warnings for
	non-inherited keys that may be discarded from /Pages by
	non-conformant PDF files when the /Pages tree is flattened.

2012-06-27  Jay Berkenbilt  <ejb@ql.org>

	* Add Pl_Concatenate pipeline for stream concatenation also
	implemented by Tobias Hoffmann.  Also added test code
	(libtests/concatenate.cc).

	* Add new methods implemented by Tobias Hoffmann:
	QPDFObjectHandle::newReal(double) and
	QPDFObjectHandle::newStream(QPDF*, std::string const&).

2012-06-26  Jay Berkenbilt  <ejb@ql.org>

	* Minor changes so that support for PDF files larger than 4GB
	works well with 32-bit and 64-bit Linux and also with 32-bit and
	64-bit Windows with both MSVC and mingw.

	* Rework internal methods for doing recovery of the cross
	reference tables for much greater efficiency both in terms of time
	and memory usage.

2012-06-24  Jay Berkenbilt  <ejb@ql.org>

	* Support PDF files larger than 4 GB.  This involved many changes
	to the ABI to increase the size of integer types used in various
	places as well as increasing the amount of padding used when
	creating linearized files.  Automated tests for large files are
	disabled by default.  Run ./configure --help for information on
	enabling them.  Running the tests requires 11 GB of free disk
	space and takes several minutes.

2012-06-22  Jay Berkenbilt  <ejb@ql.org>

	* examples/pdf-create.cc: Provide an example of creating a PDF
	from scratch.  This simple PDF has a single page with some text
	and an image.

	* Add empty QPDFObjectHandle factories for array and dictionary.
	With PDF-from-scratch capability, it is useful to be able to
	create empty arrays and dictionaries and add keys to them.
	Updated pdf_from_scratch.cc to use these interfaces.

2012-06-21  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDF::emptyPDF() to create an empty QPDF object suitable for
	adding pages and other objects to.  pdf_from_scratch.cc is test
	code that exercises it.

	* make/libtool.mk: Place user-specified CPPFLAGS and LDFLAGS later
	in the compilation so that if a user installs things in a
	non-standard place that they have to tell the build about, earlier
	versions of qpdf installed there won't break the build.  Thanks to
	Macports for reporting this.  (Fixes bug 3468860.)

	* Instead of using off_t in the public APIs, use qpdf_offset_t
	instead.  This is defined as long long in qpdf/Types.h.  If your
	system doesn't support long long, you can redefine it.

	* Add pkg-config files

	* QPDFObjectHandle: add shallowCopy() method

	* QPDF: add new APIs for adding and removing pages.  This includes
	addPage(), addPageAt(), and removePage().  Also a method
	updateAllPagesCache() is now available to force update of the
	internal pages cache if you should modify the pages structure
	manually.

	* QPDF: new processFile method that takes an open FILE*
	instead of a filename.

2012-06-20  Jay Berkenbilt  <ejb@ql.org>

	* Add new array mutation routines to QPDFObjectHandle.
	Implemented by Tobias Hoffmann.

	* Rework APIs that use size_t, off_t, and primative integer types
	so that size_t is used for sizes of memory and off_t is used for
	file offsets.  Also set _FILE_OFFSET_BITS so that large files can
	be supported on 32-bit UNIX/Linux platforms.  The code assumes in
	places that sizeof(off_t) >= sizeof(size_t).  This resulted in
	non-compatible ABI changes and hopefully clears the way for QPDF
	to work with files that are larger than 4 GiB in size.

	* Add support for versioned symbols on ELF platforms.

	* Various fixes for gcc 4.7

2011-04-06  Jay Berkenbilt  <ejb@ql.org>

        * Fix PCRE to stop using deprecated (and now dropped) interfaces.

2011-12-28  Jay Berkenbilt  <ejb@ql.org>

	* 2.3.1: release

	* include <stdint.h> if available to support MSVC 2010

	* Since PCRE is not necessarily thread safe, don't declare any
	PCRE objects to be static.

	* Disregard stderr output from ghostscript when using it to
	compare images in the test suite; see comments in qpdf.test for
	details.

	* Fixed a few documentation errors.

2011-08-11  Jay Berkenbilt  <ejb@ql.org>

	* 2.3.0: release

	* include/qpdf/qpdf-c.h ("C"): add new methods
	qpdf_init_write_memory, qpdf_get_buffer_length, and
	qpdf_get_buffer to support writing to memory from the C API.

	* include/qpdf/qpdf-c.h ("C"): add new methods qpdf_get_info_key
	and qpdf_set_info_key for manipulating text fields of the /Info
	dictionary.

2011-08-10  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDFWriter.cc (copyEncryptionParameters): preserve
	whether metadata is encryption.  This fixes part of bug 3173659:
	the password becomes invalid if qpdf copies an encrypted file with
	cleartext-metadata.

	* include/qpdf/QPDFWriter.hh: add a new constructor that takes
	only a QPDF reference and leaves specification of output for
	later.  Add methods setOutputFilename() to set the output to a
	filename or stdout, and setOutputMemory() to indicate that output
	should go to a memory buffer.  Add method getBuffer() to retrieve
	the buffer used if output was saved to a memory buffer.

	* include/qpdf/QPDF.hh: add methods replaceObject() and
	swapObjects() to allow replacement of an object and swapping of
	two objects by object ID.

	* include/qpdf/QPDFObjectHandle.hh: add new methods getDictAsMap()
	and getArrayAsVector() for returning the elements of a dictionary
	or an array as a map or vector.

2011-06-25  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.4: release

2011-06-23  Jay Berkenbilt  <ejb@ql.org>

	* make/libtool.mk (install): Do not strip executables and shared
	libraries during installation.  Leave that up to the packager.

	* configure.ac: disable -Werror by default.

2011-05-07  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDF_linearization.cc (isLinearized): remove unused
	offset variable, found by a gcc 4.6 warning.

2011-04-30  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.3: release

	* libqpdf/QPDF.cc (readObjectInternal): Accept the case of the
	stream keyword being followed by carriage return by itself.  While
	this is not permitted by the specification, there are PDF files
	that do this, and other readers can read them.

	* libqpdf/Pl_QPDFTokenizer.cc (processChar): When an inline image
	is detected, suspend normalization only up to the end of the
	inline image rather than for the remainder of the content stream.
	(Fixes qpdf-Bugs 3152169.)

2011-01-31  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDF.cc (readObjectAtOffset): use -1 rather than 0 when
	reading an object at a given to indicate that no object number is
	expected.  This allows xref recovery to proceed even if a file
	uses the invalid object number 0 as a regular object.

	* libqpdf/QPDF_linearization.cc (isLinearized): use -1 rather than
	0 as a sentintel for not having found the first object in the
	file.  Since -1 can never match the regular expression, this
	prevents an infinite loop when checking a file that starts with
	(erroneous) 0 0 obj.  (Fixes qpdf-Bugs-3159950.)

2010-10-04  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.2: release

	* include/qpdf/qpdf-c.h: Add qpdf_read_memory to C API to call
	QPDF::processMemoryFile.

2010-10-01  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.1: release

	* include/qpdf/QPDF.hh: Add setOutputStreams method to allow
	redirection of library-generated output/error to alternative
	streams.

	* include/qpdf/QPDF.hh: Add processMemoryFile method for
	processing a PDF file from a memory buffer instead of a file.

2010-09-24  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDF.cc: change private "file" method to be a
	PointerHolder<InputSource> to prepare qpdf for being able to work
	with PDF files loaded into memory in addition to working with
	files on disk.

	* include/qpdf/PointerHolder.hh: add operator* and operator->
	methods so that PointerHolder objects can be used like pointers.
	This is consistent with the smart pointer objects in the next
	revision of C++.

2010-09-05  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDF.cc (readObjectInternal): Recognize empty objects
	and treat them as null.

	* libqpdf/QPDF_Stream.cc (filterable): Handle inline image filter
	abbreviations as stream filter abbreviations.  Although this is
	not technically allowed by the PDF specification, table H.1 in the
	pre-ISO spec indicates that Adobe's readers accept them.  Thanks
	to Jian Ma <stronghorse@tom.com> for bringing this to my
	attention.

2010-08-14  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.0: release

	* Rename README.windows to README-windows.txt and convert its line
	endings to Windows-style line endings.  Also mention Jian Ma's VC6
	port in the manual and README-windows.txt.

2010-08-09  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::getRawStreamData to return raw
	(unfiltered) stream data.

2010-08-08  Jay Berkenbilt  <ejb@ql.org>

	* 2.2.rc1: release

2010-08-05  Jay Berkenbilt  <ejb@ql.org>

	* Add QPDFObjectHandle::addPageContents, a convenience routine for
	appending or prepending new streams to a page's content streams.
	The "pdf-double-page-size" example illustrates its use.

	* Add new methods to QPDFObjectHandle: replaceStreamData and
	newStream.  These methods allow users of the qpdf library to add
	new streams and to replace data of existing streams.  The
	"pdf-double-page-size" and "pdf-invert-images" examples illustrate
	their use.

2010-06-06  Jay Berkenbilt  <ejb@ql.org>

	* Fix memory leak for QPDF objects whose underlying PDF objects
	contain circular references.  Thanks to Jian Ma
	<stronghorse@tom.com> for calling my attention to the memory leak.

2010-04-25  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.5: release

	* libqpdf/QPDF_encryption.cc (compute_encryption_key): remove
	restrictions on length of file identifier string.  (Fixes
	qpdf-Bugs-2991412.)

2010-04-18  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.4: release

	* libqpdf/QPDFWriter.cc (writeLinearized): the padding calculation
	fix in 2.1.2 was applied in only one place but it was needed in
	two places since there are actually two cross reference streams in
	a linearized file.  The new padding calculation is now used for
	both streams.  Hopefully this should put an end to linearization
	padding problems.  (Fixes qpdf-Bugs-2979219.)

2010-04-10  Jay Berkenbilt  <ejb@ql.org>

	* qpdf/qpdf.cc (main): Since qpdf --check only checks syntax and
	stream encoding without doing any semantic checks, make the output
	clearer when no errors around found.  This is inspired by
	qpdf-Bugs-2983225.

2010-03-27  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.3: release

	* libqpdf/QPDF_optimization.cc (flattenScalarReferences): Flatten
	scalar references for unreferenced objects as well as those seen
	during traversal of the file.  This matters when preserving object
	streams that contain unreferenced objects with indirect scalars.
	(Fixes qpdf-Bugs-2974522.)  Updated TODO with a description of a
	possibly better fix involving removal of flattenScalarReferences.

	* libqpdf/Pl_AES_PDF.cc (finish): Don't complain if an AES input
	buffer is not a multiple of 16 bytes.  Instead, just pad with
	nulls and hope for the best.  PDF files have been encountered "in
	the wild" that contain AES buffers that aren't a multiple of 16
	bytes.

2010-01-24  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.2: release

	* libqpdf/QPDFWriter.cc: fix logic error in padding calculation.
	When writing linearized files with cross reference streams, the
	padding calculation failed to take differences in sizes of
	compressed data between pass 1 and pass 2 into consideration.

2009-12-14  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.1: release

	* qpdf/qtest/qpdf.test: improve test for acroread to make sure it
	actually works and is not just present in the path.

2009-12-13  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/qpdf/Pl_AES_PDF.hh: include <stdint.h>, if available, so
	we have valid definitions of uint32_t.

2009-10-30  Jay Berkenbilt  <ejb@ql.org>

	* 2.1: release

	* libqpdf/QPDF.cc: be more forgiving of extraneous whitespace in
	the xref table and while recovering from error conditions.

2009-10-26  Jay Berkenbilt  <ejb@ql.org>

	* Work around failure of PCRE test case; this test case exercises
	an aspect of PCRE that qpdf does not use, and the test fails with
	the version of PCRE on Red Hat Enterprise Linux 5, so we ignore
	failure on this particular test case.

	* Fix RPM .spec file to include "C" examples

2009-10-24  Jay Berkenbilt  <ejb@ql.org>

	* 2.1.rc1: release

	* Provide interfaces for getting qpdf's own version number

2009-10-19  Jay Berkenbilt  <ejb@ql.org>

	* include/qpdf/QPDF.hh (QPDF): getWarnings now returns a list of
	QPDFExc rather than a list of strings.  This way, warnings may be
	inspected in more detail.

	* Include information about the last object read in most error
	messages.  Most of the time, this will provide a good hint as to
	which object contains the error, but it's possible that the last
	object read may not necessarily be the one that has the error if
	the erroneous object was previously read and cached.

2009-10-18  Jay Berkenbilt  <ejb@ql.org>

	* If forcing version, disable object stream creation and/or
	encryption if previous specifications are incompatible with new
	version.  It is still possible that PDF content, compression
	schemes, etc., may be incompatible with the new version, but at
	least this way, older viewers will at least have a chance.

	* libqpdf/QPDFWriter.cc (unparseObject): avoid compressing
	Metadata streams if possible.

2009-10-13  Jay Berkenbilt  <ejb@ql.org>

	* Upgrade embedded qtest to version 1.4, which allows the test
	suite to be run in Windows with MSYS and ActiveState Perl rather
	than requiring Cygwin perl.

2009-10-04  Jay Berkenbilt  <ejb@ql.org>

	* Implement support AES encrypt and crypt filters.  Implementation
	is not fully tested due to lack of test data but has been tested
	for several cases.

2009-10-04  Jay Berkenbilt  <ejb@ql.org>

	* Add methods to QPDFWriter and corresponding command line
	arguments to qpdf to set the minimum output PDF version and also
	to force the version to a particular value.

	* libqpdf/QPDF.cc (processXRefStream): warn and ignore extra xref
	stream entries when stream is larger than reported size.  This
	used to be a fatal error.  (Fixes qpdf-Bugs-2872265.)

2009-09-27  Jay Berkenbilt  <ejb@ql.org>

	* Add several methods to query permissions controlled by the
	encryption dictionary.  Note that qpdf does not enforce these
	permissions even though it allows the user to query them.

	* The function QPDF::getUserPassword returned the user password
	with the required padding as specified by the PDF specification.
	This is seldom useful to users.  This function has been replaced
	by QPDF::getPaddedUserPassword.  Call the new
	QPDF::getTrimmedUserPassword to retreive the user password in a
	human-readable format.

	* qpdf/qpdf.cc (main): qpdf --check now prints the PDF version
	number in addition to its other output.

2009-09-26  Jay Berkenbilt  <ejb@ql.org>

	* Removed all references to QEXC; now using std::runtime_error and
	std::logic_error and their subclasses for all exceptions.

2009-05-03  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.6: release

	* libqpdf/QPDF_Stream.cc (filterable): ignore /DecodeParms if it's
	not a type we recognize.  (Fixes qpdf-Bugs-2779746.)

2009-03-10  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.5: release

2009-03-09  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/Pl_LZWDecoder.cc: adjust LZWDecoder full table
	detection, now having been able to adequately test boundary
	conditions both and with and without early code change.  Also
	compared implementation with other LZW decoders.

2009-03-08  Jay Berkenbilt  <ejb@ql.org>

	* qpdf/fix-qdf (write_ostream): Adjust offsets while writing
	object streams to account for changes in the length of the
	dictionary and offset tables.

	* qpdf/qpdf.cc (main): In check mode, in addition to checking
	structure of file, attempt to decode all stream data.

	* libqpdf/QPDFWriter.cc (QPDFWriter::writeObject): In QDF mode,
	write a comment to the QDF file before each object that indicates
	the object ID of the corresponding object from the original file.
	Add --no-original-object-ids flag to qpdf and
	setSuppressOriginalObjectIDs() method to QPDFWriter to turn this
	behavior off.

	* libqpdf/QPDF.cc (QPDF::pipeStreamData): Issue a warning instead
	of failing if there is a problem found while decoding stream.

	* qpdf/qpdf.cc: Exit with a status of 3 if warnings were found
	regardless of what mode we're in.

2009-02-21  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.4: release

2009-02-20  Jay Berkenbilt  <ejb@ql.org>

	* Fix many typos in comments and strings.

	* qpdf/qpdf.cc: in --check mode, if there are warnings but no
	errors, exit with a status of 3.

	* libqpdf/QPDF.cc (QPDF::insertXrefEntry): when recovering the
	cross-reference table, have objects we encounter later in the file
	supersede those we found earlier.  This improves the chances of
	being able to recover appended files with damaged cross-reference
	tables.

2009-02-19  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/Pl_LZWDecoder.cc: correct logic error for previously
	untested case of running the LZW decoder without the "early code
	change" flag.  Thanks to a bug report from "Atom Smasher", I
	finally was able to obtain an input stream compressed in this way.

2009-02-15  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.3: release

2008-12-11  Jay Berkenbilt  <ejb@ql.org>

	* qpdf/qpdf.cc (main): Accept -help and -version as well as --help
	and --version

2008-11-23  Jay Berkenbilt  <ejb@ql.org>

	* Include stdio.h in a few files for proper compilation with (yet
	to be released) gcc 4.4

	* updated embedded qtest to version 1.3

	* libqpdf/QPDF_String.cc (QPDF_String::getUTF8Val): handle
	UTF-16BE properly rather than just treating the string as a string
	of 16-bit characters.

2008-06-30  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.2: release

	* updated embedded qtest to version 1.2 (includes previous
	changes)

2008-06-07  Jay Berkenbilt  <ejb@ql.org>

	* qpdf/qtest/qpdf/diff-encrypted: change == to = so that the test
	suite passes when /bin/sh is not bash

2008-05-07  Jay Berkenbilt  <ejb@ql.org>

	* qtest/bin/qtest-driver (run_test): increase timeout for qtest to
	be more tolerant of slow machines

2008-05-06  Jay Berkenbilt  <ejb@ql.org>

	* 2.0.1: release

	* make/rules.mk: fix logic with .dep generation for .lo files so
	that dependencies work properly with libtool

2008-05-05  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/qpdf/MD5.hh: fix header to be 64-bit clean

	* configure.ac: add tests for sized integer types

2008-05-04  Jay Berkenbilt  <ejb@ql.org>

	* libqpdf/QPDF_encryption.cc: do not assume size_t is unsigned int

	* qpdf/qtest/qpdf.test: removed locale-specific tests.  These were
	really to check bugs in perl 5.8.0 and are obsolete now.  They
	also make the test suite fail in some environments that don't have
	all the locales fully configured.

	* various: updated several files for gcc 4.3 by adding missing
	includes (string.h, stdlib.h)

2008-04-26  Jay Berkenbilt  <ejb@ql.org>

	* 2.0: initial public release