octoleo
/
qpdf
mirror of https://github.com/qpdf/qpdf.git
2
1
Fork 0
Code Issues Releases Wiki Activity
qpdf/README-maintainer.md

32 KiB
Raw Permalink Blame History

Maintainer Notes

Contents

ROUTINE DEVELOPMENT

Remember to check pull requests as well as issues in github.

Include -DCMAKE_EXPORT_COMPILE_COMMANDS=ON with cmake if using emacs lsp mode.

Default:

cmake -DMAINTAINER_MODE=ON -DBUILD_STATIC_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=RelWithDebInfo ..

Debugging:

cmake -DMAINTAINER_MODE=ON -DBUILD_SHARED_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=Debug ..

Profiling:

CFLAGS=-pg LDFLAGS=-pg \
   cmake -DMAINTAINER_MODE=ON -DBUILD_SHARED_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=Debug ..

Then run gprof gmon.out. Note that gmon.out is not cumulative.

Coverage:

cmake -DMAINTAINER_MODE=ON -DBUILD_SHARED_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=Debug -DENABLE_COVERAGE=ON..

Then, from the build directory, run the test suite (ctest --verbose) followed by

gcovr -r .. --html --html-details -o coverage-report.html

Note that, in early 2024, branch coverage information is not very accurate with C++.

Memory checks:

CFLAGS="-fsanitize=address -fsanitize=undefined" \
   CXXFLAGS="-fsanitize=address -fsanitize=undefined" \
   LDFLAGS="-fsanitize=address -fsanitize=undefined" \
   CC=clang CXX=clang++ \
   cmake -DMAINTAINER_MODE=ON -DBUILD_SHARED_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=Debug ..

Windows:

../cmake-win {mingw|msvc} maint

See ./build-scripts for other ways to run the build for different configurations.

VERSIONS

  • The version number on the main branch is whatever the version would be if the top of the branch were released. If the most recent release is version a.b.c, then

    • If there are any ABI-breaking changes since the last release, main's version is a+1.0.0
    • Else if there is any new public API, main's version is a.b+1.0
    • Else if there are any code changes, main's version is a.b.c+1

  • Whenever we bump the version number, bump shared library versions as well.

  • Every released major/minor version has an a.b branch which is used primarily for documentation but could potentially be used to create a new patch release after main has moved on. We don't do that as a rule, but there's no reason we couldn't do it if main had unreleased ABI/API changes that were still in flux and an important bug fix was needed on the most recent release. In that case, a release can be cut from a release branch and then either main can be rebased from there or the changes can be merged back, depending on the amount of drift.

CHECKING DOCS ON readthedocs

To check docs on readthedocs.io without running all of CI, push to the doc-check branch. Then visit https://qpdf.readthedocs.io/en/doc-check/ Building docs from pull requests is also enabled.

GOOGLE OSS-FUZZ

  • See ../misc/fuzz (not in repo) for unfixed, downloaded fuzz test cases

  • qpdf project: https://github.com/google/oss-fuzz/tree/master/projects/qpdf

  • Adding new test cases: download the file from oss-fuzz and drop it in fuzz/qpdf_extra/issue-number.fuzz. When ready to include it, add to fuzz/CMakeLists.txt. Until ready to use, the file can be stored anywhere, and the absolute path can be passed to the reproduction code as described below.

  • To test locally, see https://github.com/google/oss-fuzz/tree/master/docs/, especially new_project_guide.md. Summary:

    Clone the oss-fuzz project. From the root directory of the repository:

    python3 infra/helper.py build_image --pull qpdf
python3 infra/helper.py build_fuzzers [ --sanitizer memory|undefined|address ] qpdf [path-to-qpdf-source]
python3 infra/helper.py check_build qpdf
python3 infra/helper.py build_fuzzers --sanitizer coverage qpdf
python3 infra/helper.py coverage qpdf

    To reproduce a test case, build with the correct sanitizer, then run

    python3 infra/helper.py reproduce qpdf testcase

    where fuzzer is the fuzzer used in the crash.

    The fuzzer is in build/out/qpdf. It can be run with a directory as an argument to run against files in a directory. You can use

    qpdf_fuzzer -merge=1 cur new >& /dev/null&

    to add any files from new into cur if they increase coverage. You need to do this with the coverage build (the one with --sanitizer coverage)

  • General documentation: http://libfuzzer.info

  • Build status: https://oss-fuzz-build-logs.storage.googleapis.com/index.html

  • Project status: https://oss-fuzz.com/ (private -- log in with Google account)

  • Latest corpus: gs://qpdf-backup.clusterfuzz-external.appspot.com/corpus/libFuzzer/qpdf_fuzzer/latest.zip

CODING RULES

  • Code is formatted with clang-format-16. See .clang-format and the "Code Formatting" section in manual/contributing.rst for details. See also "CODE FORMATTING" below.

  • Use std::to_string instead of QUtil::int_to_string et al

  • Use of assert:

    • Test code: #include <qpdf/assert_test.h> first.
    • Debug code: #include <qpdf/assert_debug.h> first and use qpdf_assert_debug instead of assert.

    These rules are enforced by the check-assert test. This practices serves to

    • remind us that assert in release code disappears and so should only be used for debugging; when doing so use a Debug build configuration

    • protect us from using assert in test code without explicitly removing the NDEBUG definition, since that would cause the assert not to actually be testing anything in non-Debug build configurations.

  • In a source file, include the header file that declares the source class first followed by a blank line. If a config file is needed first, put a blank line between that and the header followed by another blank line. This assures that each header file is included first at least once, thereby ensuring that it explicitly includes all the headers it needs, which in turn alleviates lots of header ordering problems. The blank line ensures that formatters don't mess this up by resorting the headers.

  • Avoid atoi. Use QUtil::string_to_int instead. It does overflow/underflow checking.

  • Avoid certain functions that tend to be macros or create compilation errors on some platforms. Known cases: strcasecmp, abs. Avoid min and max. If needed, std::min and std::max are okay to use in C++ code with included.

  • Remember to avoid using operator[] with std::string or std::vector. Instead, use at(). See README-hardening.md for details.

  • Use QIntC for type conversions -- see casting policy in docs.

  • Remember to imbue ostringstreams with std::locale::classic() before outputting numbers. This protects against the user's global locale altering otherwise deterministic values. (See github issue #459.) One could argue that error messages containing numbers should respect the user's locale, but I think it's more important for output to be consistent, since the messages in question are not really targeted at the end user.

  • Use QPDF_DLL on all methods that are to be exported in the shared library/DLL. Use QPDF_DLL_CLASS for all classes whose type information is needed. This is important for classes that are used as exceptions, subclassed, or tested with dynamic_cast across the the shared object boundary (or "shared library boundary" -- we may use either term in comments and documentation). In particular, anything new derived from Pipeline or InputSource should be marked with QPDF_DLL_CLASS. We shouldn't need to do it for QPDFObjectHelper or QPDFDocumentHelper subclasses since there's no reason to use dynamic_cast with those, but doing it anyway may help with some strange cases for mingw or with some code generators that may systematically do this for other reasons.

    IMPORTANT NOTE ABOUT QPDF_DLL_CLASS: On mingw, the vtable for a class with some virtual methods and no pure virtual methods seems often (always?) not to be generated if the destructor is inline or declared with = default. Therefore, for any class that is intended to be used as a base class and doesn't contain any pure virtual methods, you must declare the destructor in the header without = default and provide a non-inline implementation in the source file. Add this comment to the implementation:

    // Must be explicit and not inline -- see QPDF_DLL_CLASS in
// README-maintainer

  • Put private member variables in std::unique_ptr for all public classes. Forward declare Members in the header file and define Members in the implementation file. One of the major benefits of defining Members in the implementation file is that it makes it easier to use private classes as data members and simplifies the include order. Remember that Members must be fully defined before the destructor of the main class. For an example of this pattern see class JSONHandler.

    Exception: indirection through std::unique_ptr incurs an overhead, so don't do it for:

    • (especially private) classes that are copied a lot, like QPDFObjectHandle and QPDFObject.
    • classes that are a shared pointer to another class, such as QPDFObjectHandle or JSON.

    For exported classes that do not use the member pattern for performance reasons it is worth considering adding a std::unique_ptr to an empty Members class initialized to nullptr to give the flexibility to add data members without breaking the ABI.

    Note that, as of qpdf 11, many public classes use std::shared_ptr instead. Changing this to std::unique_ptr is ABI-breaking. If the class doesn't allow copying, we can switch it to std::unique_ptr and let that be the thing that prevents copying. If the intention is to allow the object to be copied by value and treated as if it were copied by reference, then std::shared_ptr<Members> should be used. The JSON class is an example of this. As a rule, we should avoid this design pattern. It's better to make things non-copiable and to require explicit use of shared pointers, so going forward, std::unique_ptr should be preferred.

  • Traversal of objects is expensive. It's worth adding some complexity to avoid needless traversals of objects.

  • Avoid attaching too much metadata to objects and object handles since those have to get copied around a lot.

ZLIB COMPATIBILITY

The qpdf test suite is designed to be independent of the output of any particular version of zlib. There are several strategies to make this work:

  • build-scripts/test-alt-zlib runs in CI and runs the test suite with a non-default zlib. Please refer to that code for an example of how to do this in case you want to test locally.

  • The test suite is full of cases that compare output PDF files with expected PDF files in the test suite. If the file contains data that was compressed by QPDFWriter, then the output file will depend on the behavior of zlib. As such, using a simple comparison won't work. There are several strategies used by the test suite.

    • A new program called qpdf-test-compare, in most cases, is a drop in replacement for a simple file comparison. This code make sure the two files have exactly the same number of objects with the same object and generation numbers, and that corresponding objects are identical with the following allowances (consult its source code for all the details details):

      • The /Length key is not compared in stream dictionaries.
      • The second element of /ID is not compared.
      • If the first and second element of /ID are the same, then the first element if /ID is also not compared.
      • If a stream is compressed with /FlateDecode, the uncompressed stream data is compared. Otherwise, the raw stream data is compared.
      • Generated fields in the /Encrypt dictionary are not compared, though password-protected files must have the same password.
      • Differences in the contents of /XRef streams are ignored.

      To use this, run qpdf-test-compare actual.pdf expected.pdf, and expect the output to match expected.pdf. For example, if a test used to be written like this;

      $td->runtest("check output",
             {$td->FILE => "a.pdf"},
             {$td->FILE => "out.pdf"});

      then write it like this instead:

      $td->runtest("check output",
             {$td->COMMAND => "qpdf-test-compare a.pdf out.pdf"},
             {$td->FILE => "out.pdf", $td->EXIT_STATUS => 0});

      You can look at compare-for-test/qtest/compare.test for additional examples.

      Here's what's going on:

      • If the files "match" according to the rules of qpdf-test-compare, the output of the program is the expected file.
      • If the files do not match, the output is the actual file. The reason is that, if a change is made that results in an expected change to the expected file, the output of the comparison can be used to replace the expected file (as long as it is definitely known to be correct—no shortcuts here!). That way, it doesn't matter which zlib you use to generate test files.
      • As a special debugging tool, you can set the QPDF_COMPARE_WHY environment variable to any value. In this case, if the files don't match, the output is a description of the first thing in the file that doesn't match. This is mostly useful for debugging qpdf-test-compare itself, but it can also be helpful as a sanity check that the differences are expected. If you are trying to find out the real differences, a suggestion is to convert both files to qdf and compare them lexically.

    • There are some cases where qpdf-test-compare can't be used. For example, if you need to actually test one of the things that qpdf-test-compare ignores, you'll need some other mechanism. There are tests for deterministic ID creation and xref streams that have to implement other mechanisms. Also, linearization hint streams and the linearization dictionary in a linearized file contain file offsets. Rather than ignoring those, it can be helpful to create linearized files using --compress-streams=n. In that case, QPDFWriter won't compress any data, so the PDF will be independent of the output of any particular zlib implementation.

You can find many examples of how tests were rewritten by looking at the commits preceding the one that added this section of this README file.

Note about /ID: many test cases use --static-id to have a predictable /ID for testing. Many other test cases use --deterministic-id. While --static-id is unaffected by file contents, --deterministic-id is based on file contents and so is dependent on zlib output if there is any newly compressed data. By using qpdf-test-compare, it's actually not necessary to use either --static-id or --deterministic-id. It may still be necessary to use --static-aes-iv if comparing encrypted files, but since qpdf-test-compare ignores /Perms, a wider range of encrypted files can be compared using qpdf-test-compare.

HOW TO ADD A COMMAND-LINE ARGUMENT

Quick reminder:

  • Add an entry to the top half of job.yml for the command-line argument
  • Add an entry to the bottom half of job.yml for the job JSON field
  • Add documentation for the new option to cli.rst
  • Implement the QPDFJob::Config method in QPDFJob_config.cc
  • Adding new options tables is harder -- see below

QPDFJob is documented in three places:

  • This section provides a quick reminder for how to add a command-line argument

  • generate_auto_job has a detailed explanation about how QPDFJob and generate_auto_job work together

  • The manual ("QPDFJob Design" in qpdf-job.rst) discusses the design approach, rationale, and evolution of QPDFJob.

Command-line arguments are closely coupled with QPDFJob. To add a new command-line argument, add the option to the appropriate table in job.yml. This will automatically declare a method in the private ArgParser class in QPDFJob_argv.cc which you have to implement. The implementation should make calls to methods in QPDFJob via its Config classes. Then, add the same option to either the no-json section of job.yml if it is to be excluded from the job json structure, or add it under the json structure to the place where it should appear in the json structure.

In most cases, adding a new option will automatically declare and call the appropriate Config method, which you then have to implement. If you need a manual handler, you have to declare the option as manual in job.yml and implement the handler yourself, though the automatically generated code will declare it for you.

Adding a new option table is a bit harder and is not well-documented. For a simple example, look at the code that added the --set-page-labels table. That change was divided into two commits (one for the manual changes, and one for the generated changes) to make it easier to use as an example.

The build will fail until the new option is documented in manual/cli.rst. To do that, create documentation for the option by adding a ".. qpdf:option::" directive followed by a magic help comment as described at the top of manual/cli.rst. Put this in the correct help topic. Help topics roughly correspond with sections in that chapter and are created using a special ".. help-topic" comment. Follow the example of other options for style.

When done, the following should happen:

  • qpdf --new-option should work as expected
  • qpdf --help=--new-option should show the help from the comment in cli.rst
  • qpdf --help=topic should list --new-option for the correct topic
  • --new-option should appear in the manual
  • --new-option should be in the command-line option index in the manual
  • A Config method (in Config or one of the other Config classes in QPDFJob) should exist that corresponds to the command-line flag
  • The job JSON file should have a new key in the schema corresponding to the new option

RELEASE PREPARATION

  • Each year, update copyright notices. This will find all relevant places (assuming current copyright is from last year):

    git --no-pager grep -i -n -P "copyright.*$(expr $(date +%Y) - 1).*berkenbilt"

    Also update the copyright in these places:

    • debian package -- search for copyright.*berkenbilt in debian/copyright
    • qtest-driver, TestDriver.pm in qtest source

    Copyright last updated: 2024.

  • Take a look at "External Libraries" in TODO to see if we need to make any changes. There is still some automation work left to do, so handling external-libs releases is still manual. See also README-maintainer in external-libs.

  • Check for open fuzz crashes at https://oss-fuzz.com

  • Check all open issues and pull requests in github and the sourceforge trackers. Don't forget pull requests. Note: If the location for reporting issues changes, do a careful check of documentation and code to make sure any comments that include the issue creation URL are updated.

  • Check TODO file to make sure all planned items for the release are done or retargeted.

  • Check work qpdf project for private issues

  • Make sure the code is formatted.

    ./format-code

  • Run a spelling checker over the source code to catch errors in variable names, strings, and comments.

    ./spell-check

    This uses cspell. Install with npm install -g cspell. The output of cspell is suitable for use with M-x grep in emacs. Add exceptions to cSpell.json.

  • If needed, run large file and image comparison tests by setting these environment variables:

    QPDF_LARGE_FILE_TEST_PATH=/full/path
QPDF_TEST_COMPARE_IMAGES=1

    For Windows, use a Windows style path, not an MSYS path for large files.

  • If any interfaces were added or changed, check C API to see whether changes are appropriate there as well. If necessary, review the casting policy in the manual, and ensure that integer types are properly handled with QIntC or the appropriate cast. Remember to ensure that any exceptions thrown by the library are caught and converted. See trap_errors in qpdf-c.cc.

  • Double check versions and shared library details. They should already be up to date in the code.

    • Make sure version numbers are consistent in the following locations:
      • CMakeLists.txt
      • include/qpdf/DLL.h

    make_dist verifies this consistency, and CI fails if they are inconsistent.

  • Update release notes in manual. Look at diffs and ChangeLog. Update release date in manual/release-notes.rst. Change "not yet released" to an actual date for the release.

  • Add a release entry to ChangeLog: "x.y.z: release"

  • Commit changes with title "Prepare x.y.z release"

  • Performance test is included with binary compatibility steps. Even if releasing a new major release and not doing binary compatibility testing, do performance testing.

  • Test for performance and binary compatibility:

    ./abi-perf-test v<old> @
    • Prefix with SKIP_PERF=1 to skip performance test.
    • Prefix with SKIP_TESTS=1 to skip test suite run.

    See "ABI checks" for details about the process. End state:

    • /tmp/check-abi/perf contains the performance comparison
    • /tmp/check-abi/old contains old sizes and library
    • /tmp/check-abi/new contains new sizes and library
    • run check_abi manually to compare

CREATING A RELEASE

  • Push to main. This will create an artifact called distribution which will contain all the distribution files. Download these, verify the checksums from the job output, rename to remove -ci from the names, and extract to the release archive area.

  • Sign the source distribution:

version=x.y.z
gpg --detach-sign --armor qpdf-$version.tar.gz

  • Build and test the debian package. This includes running autopkgtest.

  • Add a calendar reminder to check the status of the debian package to make sure it is transitioning properly and to resolve any issues.

  • From the release archive area, sign the releases.

\rm -f *.sha256
files=(*)
sha256sum ${files[*]} >| qpdf-$version.sha256
gpg --clearsign --armor qpdf-$version.sha256
mv qpdf-$version.sha256.asc qpdf-$version.sha256
chmod 444 *
chmod 555 *.AppImage

  • When creating releases on github and sourceforge, remember to copy README-what-to-download.md separately onto the download area if needed.

  • Ensure that the main branch has been pushed to github. The rev-parse command below should show the same commit hash for all its arguments. Create and push a signed tag. This should be run with HEAD pointing to the tip of main.

git rev-parse qpdf/main @
git tag -s v$version @ -m"qpdf $version"
git push qpdf v$version
  • Update documentation branches
git push qpdf @:$(echo $version | sed -E 's/\.[^\.]+$//')
git push qpdf @:stable

  • If this is an x.y.0 release, visit https://readthedocs.org/projects/qpdf/versions/ (log in with github), and activate the latest major/minor version

  • Create a github release after pushing the tag. gcurl is an alias that includes the auth token.

# Create release

GITHUB_TOKEN=$(qdata-show cred github-token)
function gcurl() { curl -H "Authorization: token $GITHUB_TOKEN" ${1+"$@"}; }

url=$(gcurl -s -XPOST https://api.github.com/repos/qpdf/qpdf/releases -d'{"tag_name": "v'$version'", "name": "qpdf '$version'", "draft": true}' | jq -r '.url')

# Get upload url
upload_url=$(gcurl -s $url | jq -r '.upload_url' | sed -E -e 's/\{.*\}//')
echo $upload_url

# Upload all the files. You can add a label attribute too, which
# overrides the name.
for i in *; do
  mime=$(file -b --mime-type $i)
  gcurl -H "Content-Type: $mime" --data-binary @$i "$upload_url?name=$i"
done

If needed, go onto github and make any manual updates such as indicating a pre-release, adding release notes, etc.

Template for release notes.

This is qpdf version x.y.z. (Brief description)

For a full list of changes from previous releases, please see the [release notes](https://qpdf.readthedocs.io/en/stable/release-notes.html). See also [README-what-to-download](./README-what-to-download.md) for details about
the available source and binary distributions.

# Publish release
gcurl -XPOST $url -d'{"draft": false}'
  • Upload files to sourceforge.
rsync -vrlcO ./ jay_berkenbilt,qpdf@frs.sourceforge.net:/home/frs/project/q/qp/qpdf/qpdf/$version/

  • On sourceforge, make the source package the default for all but Windows, and make the 64-bit msvc build the default for Windows.

  • Publish a news item manually on sourceforge using the release notes text. Remove the relative link to README-what-to-download.md (just reference the file by name)

  • Upload the debian package and Ubuntu ppa backports.

  • Email the qpdf-announce list.

RUNNING pikepdf's TEST SUITE

We run pikepdf's test suite from CI. These instructions show how to do it manually.

Do this in a separate shell.

cd ...qpdf-source-tree...
export QPDF_SOURCE_TREE=$PWD
export QPDF_BUILD_LIBDIR=$QPDF_SOURCE_TREE/build/libqpdf
export LD_LIBRARY_PATH=$QPDF_BUILD_LIBDIR
rm -rf /tmp/z
mkdir /tmp/z
cd /tmp/z
git clone git@github.com:pikepdf/pikepdf
python3 -m venv v
source v/bin/activate
cd pikepdf
python3 -m pip install --upgrade pip
python3 -m pip install '.[test]'
rehash
python3 -m pip install .
pytest -n auto

If there are failures, use git bisect to figure out where the failure was introduced. For example, set up a work area like this:

rm -rf /tmp/z
mkdir /tmp/z
cd /tmp/z
git clone file://$HOME/source/qpdf/qpdf/.git qpdf
git clone git@github.com:pikepdf/pikepdf
export QPDF_SOURCE_TREE=/tmp/z/qpdf
export QPDF_BUILD_LIBDIR=$QPDF_SOURCE_TREE/build/libqpdf
export LD_LIBRARY_PATH=$QPDF_BUILD_LIBDIR
cd qpdf
mkdir build
cmake -B build -DMAINTAINER_MODE=ON -DBUILD_STATIC_LIBS=OFF \
   -DCMAKE_BUILD_TYPE=RelWithDebInfo
cat <<'EOF'
#!/bin/bash
cd /tmp/z/pikepdf
cmake --build /tmp/z/qpdf/build -j16 --target libqpdf -- -k
git clean -dfx
rm -rf ../v
python3 -m venv ../v
source ../v/bin/activate
python3 -m pip install --upgrade pip
python3 -m pip install '.[test]'
python3 -m pip install .
pytest -n auto
EOF
chmod +x /tmp/check

Then in /tmp/z/qpdf, run git bisect. Use /tmp/check at each stage to test whether it's a good or bad commit.

OTHER NOTES

For local iteration on the AppImage generation, it works to just ./build-scripts/build-appimage and get the resulting AppImage from the distribution directory. You can pass additional arguments to build-appimage, which passes them along to to docker.

Use -e SKIP_TESTS=1 to skip the test suite. Use -ti -e RUN_SHELL=1 to run a shell instead of the build script.

To iterate on the scripts directly in the source tree, you can run

docker build -t qpdfbuild appimage
docker run --privileged --rm -ti -e SKIP_TESTS=1 -e RUN_SHELL=1 \
       -v $PWD/..:/tmp/build ${1+"$@"} qpdfbuild

This will put you at a shell prompt inside the container with your current directory set to the top of the source tree and your uid equal to the owner of the parent directory source tree.

Note: this will leave some extra files (like .bash_history) in the parent directory of the source tree. You will want to clean those up.

DEPRECATION

This is a reminder of how to use and test deprecation.

To temporarily disable deprecation warnings for testing:

#ifdef _MSC_VER
# pragma warning(disable : 4996)
#endif
#if (defined(__GNUC__) || defined(__clang__))
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wdeprecated-declarations"
#endif
    // Do deprecated thing here
#if (defined(__GNUC__) || defined(__clang__))
# pragma GCC diagnostic pop
#endif

To declare something as deprecated:

[[deprecated("explanation")]]

LOCAL WINDOWS TESTING PROCEDURE

This is what I do for routine testing on Windows.

  • From Windows, git clone from my Linux clone, and unzip external-libs.

  • Start a command-line shell for x86_64 and x86 tools from Visual studio. From there, start C:\msys64\mingw64 twice and C:\msys64\mingw32 twice.

  • Create a build directory for each of the four permutations. Then, in each build directory, run ../cmake-win <tool> maint.

  • Run cmake --build . -j4. For MSVC, add --config Release

  • Test with with msvc: ctest --verbose -C Release

  • Test with mingw: ctest --verbose -C RelWithDebInfo

DOCS ON readthedocs.org

At this time, there is nothing in .github/workflows to support this. It's all set up as an integration directly between github and readthedocs.

The way readthedocs.org does stable and versions doesn't exactly work for qpdf. My tagging convention is different from what they expect, and I don't need versions for every point release. I have the following branching strategy to support docs:

  • x.y -- points to the latest x.y.z release
  • stable -- points to the latest release

The release process includes updating the approach branches and activating versions.

CMAKE notes

To verify the various cmake options and their interactions, several manual tests were done:

  • Break installed qpdf executables (qpdf, fix-qdf, zlib-flate), the shared library, and DLL.h to ensure that other qpdf installations do not interfere with building from source

  • Build static only and shared only

  • Install separate components separately

  • Build only HTML docs and only PDF docs

  • Try MAINTAINER_MODE without BUILD_DOC

We are using RelWithDebInfo for mingw and other non-Windows builds but Release for MSVC. There are linker warnings if MSVC is built with RelWithDebInfo when using external-libs.

ABI checks

Until the conversion of the build to cmake, we relied on running the test suite with old executables and a new library. When QPDFJob was introduced, this method got much less reliable since a lot of public API doesn't cross the shared library boundary. Also, when switching to cmake, we wanted a stronger check that the library had the expected ABI.

Our ABI check now consists of three parts:

  • The same check as before: run the test suite with old executables and a new library

  • Do a literal comparison of the symbols in the old and new shared libraries -- this is a strong test of ABI change

  • Do a check to ensure that object sizes didn't change -- even with no changes to the API of exported functions, size changes break API

The combination of these checks is pretty strong, though there are still things that could potentially break ABI, such as

  • Changes to the types of public or protected data members without changing the size

  • Changes to the meanings of parameters with changing the signature

Not breaking ABI/API still requires care.

The check_abi script is responsible for performing many of these steps. See comments in check_abi for additional notes. Running "check_abi check-sizes" is run by ctest on Linux when CHECK_SIZES is on.

CODE FORMATTING

  • Emacs doesn't indent breaking strings concatenated with + over lines but clang-format does. It's clearer with clang-format. To get emacs and clang-format to agree, parenthesize the expression that builds the concatenated string.

  • With

    long_function(long_function(
    args)

    clang-format anchors relative to the first function, and emacs anchors relative to the second function. Use

    long_function(
    // line-break
    long_function(
    args)

    to resolve.

In the revision control history, there is a commit around April 3, 2022 with the title "Update some code manually to get better formatting results" that shows several examples of changing code so that clang-format produces several results. (In git this is commit 77e889495f7c513ba8677df5fe662f08053709eb.)

The commits that have the bulk of automatic or mechanical reformatting are listed in .git-blame-ignore-revs. Any new bulk updates should be added there.