octoleo/qpdf
2
1
Fork 0
mirror of https://github.com/qpdf/qpdf.git synced 2024-11-05 04:47:53 +00:00
Code Issues Releases Wiki Activity
e410b0fe0d
qpdf/README-windows.md
Jay Berkenbilt e452d9dca6 Spell check
2017-08-22 14:22:20 -04:00

9.2 KiB
Raw Blame History

Common Setup

You may need to disable antivirus software to run qpdf's test suite. Running Windows Defender on Windows 10 does not interfere with building or running qpdf or its test suite.

To be able to build qpdf and run its test suite, you must have MSYS2 installed. This replaces the old process of having a mixture of msys, mingw-w64, and ActiveState perl. It is now possible to do everything with just MSYS2.

Here's what I did on my system:

  • Download msys2 (64-bit) from msys2.org
  • Run the installer.
  • Run msys2_shell.cmd by allowing the installer to start it.
  • From the prompt:
    • Run pacman -Syuu and follow the instructions, which may tell you to close the window and rerun the command multiple times.
    • pacman -S make base-devel git zip unzip
    • pacman -S mingw-w64-x86_64-toolchain mingw-w64-i686-toolchain

If you would like to build with Microsoft Visual C++, install a suitable Microsoft Visual Studio edition. In early 2016, 2015 community edition with C++ support is fine. It may crash a few times during installation, but repeating the installation will allow it to finish, and the resulting software is stable.

To build qpdf with Visual Studio, start the msys2 mingw32 or mingw64 shell from a command window started from one of the Visual Studio shell windows. You must use the mingw shell for the same word size (32 or 64 bit) as the Windows compiler since the MSVC build uses objdump from the msys distribution. You must also have it inherit the path. For example:

  • Start x64 native tools command prompt from msvc
  • set MSYS2_PATH_TYPE=inherit
  • C:\msys64\mingw64

Image comparison tests are disabled by default, but it is possible to run them on Windows. To do so, add --enable-test-compare-images from the configure statements given below and install some additional third-party dependencies. These may be provided in an environment such as MSYS or Cygwin or can be downloaded separately for other environments. You may extract or install the following software into separate folders each and add the bin folder to your PATH environment variable to make executables and DLLs available. If installers are provided, they might do that already by default.

  • LibJpeg: This archive provides some needed DLLs needed by LibTiff.
  • LibTiff: This archive provides some needed binaries and DLLs if you want to use the image comparison tests. It depends on some DLLs from LibJpeg.
  • GhostScript: GhostScript is needed for image comparison tests. It's important that the binary is available as gs, while its default name is gswin32[c].exe. You can either copy one of the original files, use mklink to create a hard/softlink, or provide a custom gs.cmd wrapper that forwards all arguments to one of the original binaries. Using mklink with gswin32c.exe is probably the best choice.

External Libraries

In order to build qpdf, you must have a copy of zlib and the jpeg library. The easy way to get it is to download the external libs from the qpdf download area. There are packages called external-libs-bin.zip and external-libs-src.zip. If you are building with MSVC 2015 or MINGW with MSYS2, you can just extract the qpdf-external-libs-bin.zip zip file into the top-level qpdf source tree. Note that you need the 2017-08-21 version (at least) to build qpdf 7.0 or greater since this includes jpeg. Passing --enable-external-libs to ./configure (which is done automatically if you follow the instructions below) is sufficient to find them.

You can also obtain zlib and jpeg directly on your own and install them. If you are using mingw, you can just set CPPFLAGS, LDFLAGS, and LIBS when you run ./configure so that it can find the header files and libraries. If you are building with MSVC and you want to do this, it probably won't work because ./configure doesn't know how to interpret LDFLAGS and LIBS properly for MSVC (though qpdf's own build system does). In this case, you can probably get away with cheating by passing --enable-external-libs to ./configure and then just editing CPPFLAGS, LDFLAGS, LIBS in the generated autoconf.mk file. Note that you should use UNIX-like syntax (-I, -L, -l) even though this is not what cl takes on the command line. qpdf's build rules will fix it.

You can also download qpdf-external-libs-src.zip and follow the instructions in the README.txt there for how to build external libs.

Building from version control

If you check out qpdf from version control, you will not have the files that are generated by autoconf. If you are not changing these files, you can grab them from a source distribution or create them from a system that has autoconf. To create them from scratch, run ./autogen.sh on a system that has autoconf installed. Once you have them, you can run make CLEAN=1 autofiles.zip. This will create an autofiles.zip that you can extract on top of a fresh checkout.

Building with MinGW

QPDF is known to build and pass its test suite with MSYS2 using the 32-bit and 64-bit compilers. MSYS2 is required to build as well in order to get make and other related tools. See common setup at the top of this file for installation and configuration of MSYS2. Then, from the suitable 32-bit or 64-bit environment, run

./config-mingw
make

Note that ./config-mingw just runs ./configure with specific arguments, so you can look at it, make adjustments, and manually run configure instead.

Add the absolute path to the libqpdf/build directory to your PATH. Make sure you can run the qpdf command by typing qpdf/build/qpdf and making sure you get a help message rather than an error loading the DLL or no output at all. Run the test suite by typing

make check

If all goes well, you should get a passing test suite.

To create an installation directory, run make install. This will create install-mingw/qpdf-VERSION and populate it. The binary download of qpdf for Windows with mingw is created from this directory.

You can also take a look at make_windows_releases for reference. This is how the distributed Windows executables are created.

Building with MSVC 2015

These instructions would likely work with newer versions of MSVC and are known to have worked with versions as old as 2008 Express.

You should first set up your environment to be able to run MSVC from the command line. There is usually a batch file included with MSVC that does this. Make sure that you start a command line environment configured for whichever of 32-bit or 64-bit output that you intend to build for.

From that cmd prompt, you can start your MSYS2 shell with path inheritance as described above.

Configure and build as follows:

./config-msvc
make

Note that ./config-msvc just runs ./configure with specific arguments, so you can look at it, make adjustments, and manually run configure instead.

NOTE: automated dependencies are not generated with the msvc build. If you're planning on making modifications, you should probably work with mingw. If there is a need, I can add dependency information to the msvc build, but since I only use it for generating release versions, I haven't bothered.

Once built, add the full path to the libqpdf/build directory to your path and run

make check

to run the test suite.

If you are building with MSVC and want to debug a crash in MSVC's debugger, first start an instance of Visual C++. Then run qpdf. When the abort/retry/ignore dialog pops up, first attach the process from within visual C++, and then click Retry in qpdf.

A release version of qpdf is built by default. If you want to link against debugging libraries, you will have to change /MD to /MDd in make/msvc.mk. Note that you must redistribute the Microsoft runtime DLLs. Linking with static runtime (/MT) won't work; see "Static Runtime" below for details.

Runtime DLLs

Both build methods create executables and DLLs that are dependent on the compiler's runtime DLLs. When you run make install, the installation process will automatically detect the DLLs and copy them into the installation bin directory. Look at the copy_dlls script for details on how this is accomplished.

Redistribution of the runtime DLL is unavoidable as of this writing; see "Static Runtime" below for details.

Static Runtime

Building the DLL and executables with static runtime does not work with either Visual C++ .NET 2008 (a.k.a. vc9) using /MT or with mingw (at least as of 4.4.0) using -static-libgcc. The reason is that, in both cases, there is static data involved with exception handling, and when the runtime is linked in statically, exceptions cannot be thrown across the DLL to EXE boundary. Since qpdf uses exception handling extensively for error handling, we have no choice but to redistribute the C++ runtime DLLs. Maybe this will be addressed in a future version of the compilers. This has not been retested with the toolchain versions used to create qpdf >= 3.0 distributions. This has not been revisited since MSVC 2008, but redistributing runtime DLLs is extremely common and should not be a problem.