mirror of
https://github.com/octoleo/restic.git
synced 2024-11-19 11:35:14 +00:00
9fa4f5eb6b
By default, the GCS Go packages have an internal "chunk size" of 8MB, used for blob uploads. Media().Do() will buffer a full 8MB from the io.Reader (or less if EOF is reached) then write that full 8MB to the network all at once. This behavior does not play nicely with --limit-upload, which only limits the Reader passed to Media. While the long-term average upload rate will be correctly limited, the actual network bandwidth will be very spikey. e.g., if an 8MB/s connection is limited to 1MB/s, Media().Do() will spend 8s reading from the rate-limited reader (performing no network requests), then 1s writing to the network at 8MB/s. This is bad for network connections hurt by full-speed uploads, particularly when writing 8MB will take several seconds. Disable resumable uploads entirely by setting the chunk size to zero. This causes the io.Reader to be passed further down the request stack, where there is less (but still some) buffering. My connection is around 1.5MB/s up, with nominal ~15ms ping times to 8.8.8.8. Without this change, --limit-upload 1024 results in several seconds of ~200ms ping times (uploading), followed by several seconds of ~15ms ping times (reading from rate-limited reader). A bandwidth monitor reports this as several seconds of ~1.5MB/s followed by several seconds of 0.0MB/s. With this change, --limit-upload 1024 results in ~20ms ping times and the bandwidth monitor reports a constant ~1MB/s. I've elected to make this change unconditional of --limit-upload because the resumable uploads shouldn't be providing much benefit anyways, as restic already uploads mostly small blobs and already has a retry mechanism. --limit-download is not affected by this problem, as Get().Download() returns the real http.Response.Body without any internal buffering. Updates #1216
387 lines
16 KiB
Markdown
387 lines
16 KiB
Markdown
This file describes changes relevant to all users that are made in each
|
|
released version of restic from the perspective of the user.
|
|
|
|
Important Changes in 0.X.Y
|
|
==========================
|
|
|
|
* We've added a local cache for metadata so that restic doesn't need to load
|
|
all metadata (snapshots, indexes, ...) from the repo each time it starts. By
|
|
default the cache is active, but there's a new global option `--no-cache`
|
|
that can be used to disable the cache. By deafult, the cache a standard
|
|
cache folder for the OS, which can be overridden with `--cache-dir`. The
|
|
cache will automatically populate, indexes and snapshots are saved as they
|
|
are loaded.
|
|
https://github.com/restic/restic/pull/1040
|
|
https://github.com/restic/restic/issues/29
|
|
https://github.com/restic/restic/issues/738
|
|
https://github.com/restic/restic/issues/282
|
|
https://github.com/restic/restic/pull/1287
|
|
|
|
* A related change was to by default create pack files in the repo that
|
|
contain either data or metadata, not both mixed together. This allows easy
|
|
caching of only the metadata files. The next run of `restic prune` will
|
|
untangle mixed files automatically.
|
|
https://github.com/restic/restic/pull/1265
|
|
|
|
* The Google Cloud Storage backend no longer requires the service account to
|
|
have the `storage.buckets.get` permission ("Storage Admin" role) in `restic
|
|
init` if the bucket already exists.
|
|
https://github.com/restic/restic/pull/1281
|
|
|
|
* Added support for rate limiting through `--limit-upload` and
|
|
`--limit-download` flags.
|
|
https://github.com/restic/restic/issues/1216
|
|
https://github.com/restic/restic/pull/1336
|
|
https://github.com/restic/restic/pull/1358
|
|
|
|
* Failed backend requests are now automatically retried.
|
|
https://github.com/restic/restic/pull/1353
|
|
|
|
* We've added the `dump` command which prints a file from a snapshot to
|
|
stdout. This can e.g. be used to restore files read with `backup --stdin`.
|
|
https://github.com/restic/restic/issues/510
|
|
https://github.com/restic/restic/pull/1346
|
|
|
|
Small changes
|
|
-------------
|
|
|
|
* The directory structure in the fuse mount now exposes a symlink `latest`
|
|
which points to the latest snapshot in that particular directory.
|
|
https://github.com/restic/restic/pull/1249
|
|
|
|
* The option `--compact` was added to the `forget` command to provide the same
|
|
compact view as the `snapshots` command.
|
|
https://github.com/restic/restic/pull/1269
|
|
|
|
* We've re-enabled a workaround for `minio-go` (the library we're using to
|
|
access s3 backends), this reduces memory usage.
|
|
https://github.com/restic/restic/issues/1256
|
|
https://github.com/restic/restic/pull/1267
|
|
|
|
* The sftp backend now prompts for the password if a password is necessary for
|
|
login.
|
|
https://github.com/restic/restic/issues/448
|
|
https://github.com/restic/restic/pull/1270
|
|
|
|
* The `generate` command has been added, which replaces the now removed
|
|
commands `manpage` and `autocomplete`. This release of restic contains the
|
|
most recent manpages in `doc/man` and the auto-completion files for bash and
|
|
zsh in `doc/bash-completion.sh` and `doc/zsh-completion.zsh`
|
|
https://github.com/restic/restic/issues/1274
|
|
https://github.com/restic/restic/pull/1282
|
|
|
|
* A bug was discovered in the library we're using to access Backblaze, it now
|
|
reuses already established TCP connections which should be a lot faster and
|
|
not cause network failures any more.
|
|
https://github.com/restic/restic/issues/1291
|
|
https://github.com/restic/restic/pull/1301
|
|
|
|
* Another bug in the `forget` command caused `prune` not to be run when
|
|
`--prune` was specified without a policy, e.g. when only snapshot IDs that
|
|
should be forgotten are listed manually. This is corrected now.
|
|
https://github.com/restic/restic/pull/1317
|
|
|
|
* The `check` command now explicetly prints `No errors were found` when no
|
|
errors could be found.
|
|
https://github.com/restic/restic/pull/1319
|
|
https://github.com/restic/restic/issues/1303
|
|
|
|
* The fuse mount now has an `ids` subdirectory which contains the snapshots
|
|
below their (short) IDs.
|
|
https://github.com/restic/restic/issues/1102
|
|
https://github.com/restic/restic/pull/1299
|
|
https://github.com/restic/restic/pull/1320
|
|
|
|
* The `backup` command was improved, it now caches the result of excludes for
|
|
a directory.
|
|
https://github.com/restic/restic/issues/1271
|
|
https://github.com/restic/restic/pull/1326
|
|
|
|
* We've added the `--cacert` option which can be used to pass one (or more) CA
|
|
certificates to restic. These are used in addition to the system CA
|
|
certificates to verify HTTPS certificates (e.g. for the REST backend).
|
|
https://github.com/restic/restic/issues/1114
|
|
https://github.com/restic/restic/pull/1276
|
|
|
|
Important Changes in 0.7.3
|
|
==========================
|
|
|
|
* For large backups stored in Google Cloud Storage, the `prune` command fails
|
|
because listing only returns the first 1000 files. This has been corrected,
|
|
no data is lost in the process. In addition, a plausibility check was added
|
|
to `prune`.
|
|
https://github.com/restic/restic/issues/1246
|
|
https://github.com/restic/restic/pull/1247
|
|
|
|
|
|
Important Changes in 0.7.2
|
|
==========================
|
|
|
|
* We've added an official docker image and a Dockerfile to build this image in
|
|
`docker/`.
|
|
https://github.com/restic/restic/pull/1061
|
|
|
|
* The git repository layout was changed to resemble the layout typically used
|
|
in Go projects, we're not using `gb` for building restic any more and
|
|
vendoring the dependencies is now taken care of by `dep`.
|
|
https://github.com/restic/restic/pull/1126
|
|
|
|
* We now support saving backups on Google Cloud Storage.
|
|
https://github.com/restic/restic/pull/1134
|
|
https://github.com/restic/restic/pull/1052
|
|
https://github.com/restic/restic/issues/211
|
|
|
|
* We've added support for Microsoft Azure Blob Storage as a restic backend.
|
|
https://github.com/restic/restic/pull/1149
|
|
https://github.com/restic/restic/pull/1059
|
|
https://github.com/restic/restic/issues/609
|
|
|
|
* In the course of supporting Microsoft Azure Blobe Storage Go 1.8 is now a
|
|
requirement to build restic.
|
|
|
|
* The `restore` command has been improved: When dirs are excluded (or not
|
|
included) in a restore, they are not loaded from the repo any more.
|
|
https://github.com/restic/restic/pull/1044
|
|
|
|
* Name collisions are now resolved by appending a counter.
|
|
https://github.com/restic/restic/issues/1179
|
|
https://github.com/restic/restic/pull/1209
|
|
|
|
|
|
Small changes
|
|
-------------
|
|
|
|
* The `key` command now prompts for a password even if the original password
|
|
to access a repo has been specified via the `RESTIC_PASSWORD` environment
|
|
variable or a password file.
|
|
https://github.com/restic/restic/issues/1132
|
|
https://github.com/restic/restic/pull/1133
|
|
|
|
* Properly report errors when reading files with exclude patterns.
|
|
https://github.com/restic/restic/pull/1144
|
|
|
|
* We now automatically generate man pages for all restic commands, see the
|
|
subdir `doc/man`.
|
|
https://github.com/restic/restic/issues/697
|
|
https://github.com/restic/restic/pull/1147
|
|
|
|
* The `key remove` command was corrected and now works as documented.
|
|
https://github.com/restic/restic/pull/1164
|
|
|
|
* When a restic command other than `init` is used with a local repository and
|
|
the repository directory does not exist, restic creates the directory
|
|
structure. That's an error, only the `init` command should create the dir.
|
|
https://github.com/restic/restic/issues/1167
|
|
https://github.com/restic/restic/pull/1182
|
|
|
|
* Restic now prints stats on all BSD systems (not only on darwin) when SIGINFO
|
|
is received (usually when ctrl+t is pressed).
|
|
https://github.com/restic/restic/pull/1203
|
|
https://github.com/restic/restic/pull/1082#issuecomment-326279920
|
|
|
|
* Since a few releases restic had the ability to write profiling files for
|
|
memory and CPU usage when `debug` is enabled. It was discovered that when
|
|
restic is interrupted (ctrl+c is pressed), the proper shutdown hook is not
|
|
run. This is now corrected.
|
|
https://github.com/restic/restic/pull/1191
|
|
|
|
* A new option `--exclude-caches` was added that allows excluding cache
|
|
directories (that are tagged as such). This is a special case of a more
|
|
generic option `--exclude-if-present` which excludes a directory if a file
|
|
with a specific name (and contents) is present.
|
|
https://github.com/restic/restic/issues/317
|
|
https://github.com/restic/restic/pull/1170
|
|
https://github.com/restic/restic/pull/1224
|
|
|
|
* The `forget` command now has an option `--group-by` that allows flexible
|
|
grouping policies.
|
|
https://github.com/restic/restic/pull/1196
|
|
|
|
* The date and time restic records for a new backup can now be specified
|
|
externally by passing `--time` to the `backup` command.
|
|
https://github.com/restic/restic/pull/1205
|
|
|
|
* The option `--compact` was added to the `snapshots` command to get a better
|
|
overview of the snapshots in a repo. It limits each snapshot to a single
|
|
line.
|
|
https://github.com/restic/restic/issues/1218
|
|
https://github.com/restic/restic/pull/1223
|
|
|
|
|
|
Important Changes in 0.7.1
|
|
==========================
|
|
|
|
* The `migrate` command for chaning the `s3legacy` layout to the `default`
|
|
layout for s3 backends has been improved: It can now be restarted with
|
|
`restic migrate --force s3_layout` and automatically retries operations on
|
|
error.
|
|
https://github.com/restic/restic/issues/1073
|
|
https://github.com/restic/restic/pull/1075
|
|
|
|
Small changes
|
|
-------------
|
|
|
|
* The local and sftp backends now create the subdirs below `data/` on
|
|
open/init. This way, restic makes sure that they always exist. This is
|
|
connected to an issue for the sftp server:
|
|
https://github.com/restic/rest-server/pull/11#issuecomment-309879710
|
|
https://github.com/restic/restic/issues/1055
|
|
https://github.com/restic/restic/pull/1077
|
|
https://github.com/restic/restic/pull/1105
|
|
|
|
* When no S3 credentials are specified in the environment variables, restic
|
|
now tries to load credentials from an IAM instance profile when the s3
|
|
backend is used.
|
|
https://github.com/restic/restic/issues/1067
|
|
https://github.com/restic/restic/pull/1086
|
|
|
|
* On Darwin and FreeBSD, restic now prints stats when SIGINFO is received
|
|
(usually when ctrl+t is pressed).
|
|
https://github.com/restic/restic/pull/1082
|
|
|
|
* The dependencies have been updated.
|
|
https://github.com/restic/restic/pull/1108
|
|
https://github.com/restic/restic/pull/1124
|
|
|
|
* A bug was found (and corrected) in the index rebuilding after prune, which
|
|
led to indexes which include blobs that were not present in the repo any
|
|
more. There were already checks in place which detected this situation and
|
|
aborted with an error message. A new run of either `prune` or
|
|
`rebuild-index` corrected the index files. This is now fixed and a test has
|
|
been added to detect this.
|
|
https://github.com/restic/restic/pull/1115
|
|
|
|
* Errors for chmod() on Unix for filesystems which do not support it (e.g. smb
|
|
mounted via gvfs) are now ignored.
|
|
https://github.com/restic/restic/pull/1080
|
|
https://github.com/restic/restic/pull/1112
|
|
|
|
* The semantic for the `--tags` option to `forget` and `snapshots` was
|
|
clarified:
|
|
https://github.com/restic/restic/issues/1081
|
|
https://github.com/restic/restic/pull/1090
|
|
|
|
Important Changes in 0.7.0
|
|
==========================
|
|
|
|
* New "swift" backend: A new backend for the OpenStack Swift cloud storage
|
|
protocol has been added, https://wiki.openstack.org/wiki/Swift
|
|
https://github.com/restic/restic/pull/975
|
|
https://github.com/restic/restic/pull/648
|
|
|
|
* New "b2" backend: A new backend for Backblaze B2 cloud storage
|
|
service has been added, https://www.backblaze.com
|
|
https://github.com/restic/restic/issues/512
|
|
https://github.com/restic/restic/pull/978
|
|
|
|
* Improved performance for the `find` command: Restic recognizes paths it has
|
|
already checked for the files in question, so the number of backend requests
|
|
is reduced a lot.
|
|
https://github.com/restic/restic/issues/989
|
|
https://github.com/restic/restic/pull/993
|
|
|
|
* Improved performance for the fuse mount: Listing directories which contain
|
|
large files now is significantly faster.
|
|
https://github.com/restic/restic/pull/998
|
|
|
|
* The default layout for the s3 backend is now `default` (instead of
|
|
`s3legacy`). Also, there's a new `migrate` command to convert an existing
|
|
repo, it can be run like this: `restic migrate s3_layout`
|
|
https://github.com/restic/restic/issues/965
|
|
https://github.com/restic/restic/pull/1004
|
|
|
|
* The fuse mount now has two more directories: `tags` contains a subdir for
|
|
each tag, which in turn contains only the snapshots that have this tag. The
|
|
subdir `hosts` contains a subdir for each host that has a snapshot, and the
|
|
subdir contains the snapshots for that host.
|
|
https://github.com/restic/restic/issues/636
|
|
https://github.com/restic/restic/pull/1050
|
|
|
|
Small changes
|
|
-------------
|
|
|
|
* For the s3 backend we're back to using the high-level API the s3 client
|
|
library for uploading data, a few users reported dropped connections (which
|
|
the library will automatically retry now).
|
|
https://github.com/restic/restic/issues/1013
|
|
https://github.com/restic/restic/issues/1023
|
|
https://github.com/restic/restic/pull/1025
|
|
|
|
* The `prune` command has been improved and will now remove invalid pack
|
|
files, for example files that have not been uploaded completely because a
|
|
backup was interrupted.
|
|
https://github.com/restic/restic/issues/1029
|
|
https://github.com/restic/restic/pull/1036
|
|
|
|
* restic now tries to detect when an invalid/unknown backend is used and
|
|
returns an error message.
|
|
https://github.com/restic/restic/issues/1021
|
|
https://github.com/restic/restic/pull/1070
|
|
|
|
Important Changes in 0.6.1
|
|
==========================
|
|
|
|
This is mostly a bugfix release and only contains small changes:
|
|
|
|
* We've fixed a bug where `rebuild-index` would corrupt the index when used
|
|
with the s3 backend together with the `default` layout. This is not the
|
|
default setting.
|
|
|
|
* Backends based on HTTP now allow several idle connections in parallel. This
|
|
is especially important for the REST backend, which (when used with a local
|
|
server) may create a lot connections and exhaust available ports quickly.
|
|
https://github.com/restic/restic/issues/985
|
|
https://github.com/restic/restic/pull/986
|
|
|
|
* Regular status report: We've removed the status report that was printed
|
|
every 10 seconds when restic is run non-interactively. You can still force
|
|
reporting the current status by sending a `USR1` signal to the process.
|
|
https://github.com/restic/restic/pull/974
|
|
|
|
* The `build.go` now strips the temporary directory used for compilation from
|
|
the binary. This is the first step in enabling reproducible builds.
|
|
https://github.com/restic/restic/pull/981
|
|
|
|
Important Changes in 0.6.0
|
|
==========================
|
|
|
|
Consistent forget policy
|
|
------------------------
|
|
|
|
The `forget` command was corrected to be more consistent in which snapshots are
|
|
to be forgotten. It is possible that the new code removes more snapshots than
|
|
before, so please review what would be deleted by using the `--dry-run` option.
|
|
|
|
https://github.com/restic/restic/pull/957
|
|
https://github.com/restic/restic/issues/953
|
|
|
|
Unified repository layout
|
|
-------------------------
|
|
|
|
Up to now the s3 backend used a special repository layout. We've decided to
|
|
unify the repository layout and implemented the default layout also for the s3
|
|
backend. For creating a new repository on s3 with the default layout, use
|
|
`restic -o s3.layout=default init`. For further commands the option is not
|
|
necessary any more, restic will automatically detect the correct layout to use.
|
|
A future version will switch to the default layout for new repositories.
|
|
|
|
https://github.com/restic/restic/pull/966
|
|
https://github.com/restic/restic/issues/965
|
|
|
|
Memory and time improvements for the s3 backend
|
|
-----------------------------------------------
|
|
|
|
We've updated the library used for accessing s3, switched to using a lower
|
|
level API and added caching for some requests. This lead to a decrease in
|
|
memory usage and a great speedup. In addition, we added benchmark functions for
|
|
all backends, so we can track improvements over time. The Continuous
|
|
Integration test service we're using (Travis) now runs the s3 backend tests not
|
|
only against a Minio server, but also against the Amazon s3 live service, so we
|
|
should be notified of any regressions much sooner.
|
|
|
|
https://github.com/restic/restic/pull/962
|
|
https://github.com/restic/restic/pull/960
|
|
https://github.com/restic/restic/pull/946
|
|
https://github.com/restic/restic/pull/938
|
|
https://github.com/restic/restic/pull/883
|