### Purpose
Instead of hardcoding `SigningKey` as text use `go:embed`. Fixes#9247.
### Testing
* Building syncthing
* Trying to upgrade (signature verification)
On kqueue-systems, folders listen for folder summaries to (be able to)
warn for potential high resource usage. However, it listened for any
folder summary and not for the summary which matches the folder it's
about. This could cause that an unwatched folder causes a folder summary
containing more files than the threshold (10k), and the listening folder
(with the watcher enabled) triggers the warning.
This makes sure that only the folder summaries which are relevant to the
specific folder are being handled.
### Testing
- Fire up some kqueue-system (freebsd, I used).
- add folder A, disable the watcher, add 10001 files
- add folder B with the watcher enabled, no files are needed here
Before the change:
- add an item to folder A, trigger a rescan to speed up the process
- wait some seconds...warning triggered by folder B's
summarySubscription
After the change:
- Only a warning is triggered if the received folder summary matches the
folder which listens for the summaries
Cleanup after #9275.
This renames `fmut` -> `mut`, removes the deadlock detector and
associated plumbing, renames some things from `...PRLocked` to
`...RLocked` and similar, and updates comments.
Apart from the removal of the deadlock detection machinery, no
functional code changes... i.e. almost 100% diff noise, have fun
reviewing.
I'm tired of the fmut/pmut shenanigans. This consolidates both under one
lock; I'm not convinced there are any significant performance
differences with this approach since we're literally just protecting map
juggling...
- The locking goes away when we were already under an appropriate fmut
lock.
- Where we had fmut.RLock()+pmut.Lock() it gets upgraded to an
fmut.Lock().
- Otherwise s/pmut/fmut/.
In order to avoid diff noise for an important change I did not do the
following cleanups, which will be filed in a PR after this one, if
accepted:
- Renaming fmut to just mut
- Renaming methods that refer to being "PRLocked" and stuff like that
- Removing the no longer relevant deadlock detector
- Comments referring to pmut and locking sequences...
`syncthing cli` subcommand was using urfave/cli as the command parser.
This PR replace it with kong, which the main command uses.
Some help texts and error message format are changed. Other than that,
all the command usage and logic remains unchanged.
There's only one place which still uses urfave/cli, which is `syncthing
cli config`, because it uses some magic to dynamically build commands
from struct reflects. I used kong's `passthrough:""` tag to pass any
argument following `syncthing cli config` to urfave/cli parser.
This PR also fixes#9041
---------
Co-authored-by: Jakob Borg <jakob@kastelo.net>
This pull request allows syncthing to request an IPv6
[pinhole](https://en.wikipedia.org/wiki/Firewall_pinhole), addressing
issue #7406. This helps users who prefer to use IPv6 for hosting their
services or are forced to do so because of
[CGNAT](https://en.wikipedia.org/wiki/Carrier-grade_NAT). Otherwise,
such users would have to configure their firewall manually to allow
syncthing traffic to pass through while IPv4 users can use UPnP to take
care of network configuration already.
### Testing
I have tested this in a virtual machine setup with miniupnpd running on
the virtualized router. It successfully added an IPv6 pinhole when used
with IPv6 only, an IPv4 port mapping when used with IPv4 only and both
when dual-stack (IPv4 and IPv6) is used.
Automated tests could be added for SOAP responses from the router but
automatically testing this with a real network is likely infeasible.
### Documentation
https://docs.syncthing.net/users/firewall.html could be updated to
mention the fact that UPnP now works with IPv6, although this change is
more "behind the scenes".
---------
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Co-authored-by: André Colomb <github.com@andre.colomb.de>
gui: Show folder/device status on small screens
On larger screens, folder and device status is shown in a textual form
directly next to folder and device titles. However, on small screens,
only icons are currently shown, which may be ambiguous to new users, who
cannot possibly know what a specific icon means (see [1]). Thus, on
small screens only, display a new entry in folder/device info that
contains the same textual information that is shown in the title on
larger screens.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: André Colomb <src@andre.colomb.de>
Before introducing the service map and using it for folder runners, the
entries in folderCfgs and folderRunners for the same key/folder were
removed under a single lock. Stopping the folder happens separately
before that with just the read lock. Now with the service map stopping
the folder and removing it from the map is a single operation. And that
still happens with just a read-lock. However even with a full lock it’s
still problematic: After the folder stopped, the runner isn’t present
anymore while the folder-config still is and sais the folder isn't
paused.
The index handler in turn looks at the folder config that is not paused,
thus assumes the runner has to be present -> nil deref on the runner.
A better solution might be to push most of these fmut maps into the
folder - they anyway are needed in there. Then there's just a single
map/source of info that's necessarily consistent. That's quite a bit of
work though, and probably/likely there will be corner cases there too.
This reverts commit e477777f49.
In principle, we could have stayed with `~1.21.1`, but `check-latest:
true` apparently checks some cache/manifest/something that is only
periodically refreshed and isn't aware of 1.21.5 yet. So update the
constraints to force an upgrade.
Also the infrastructure images weren't actually using the constraint
since there was no `setup-go` action...
This reduces allocations, in number and in size, while getting extended
attributes. This is mostly noticable when there is a large number of new
files to scan and we're running with the default scanProgressInterval --
then a queue of files is built in-memory, and this queue includes
extended attributes as part of file metadata. (Arguable it shouldn't,
but that's a more difficult and involved change.)
With 1M files to scan, each with one extended attribute, current peak
memory usage looks like this:
Showing nodes accounting for 1425.30MB, 98.19% of 1451.64MB total
Dropped 1435 nodes (cum <= 7.26MB)
Showing top 10 nodes out of 54
flat flat% sum% cum cum%
976.56MB 67.27% 67.27% 976.56MB 67.27%
github.com/syncthing/syncthing/lib/fs.getXattr
305.44MB 21.04% 88.31% 305.44MB 21.04%
github.com/syncthing/syncthing/lib/scanner.(*walker).walk.func1
45.78MB 3.15% 91.47% 1045.23MB 72.00%
github.com/syncthing/syncthing/lib/fs.(*BasicFilesystem).GetXattr
22.89MB 1.58% 93.04% 22.89MB 1.58%
github.com/syncthing/syncthing/lib/fs.listXattr
22.89MB 1.58% 94.62% 22.89MB 1.58%
github.com/syncthing/syncthing/lib/protocol.(*PlatformData).SetXattrs
16MB 1.10% 95.72% 16.01MB 1.10%
github.com/syndtr/goleveldb/leveldb/memdb.New
After the change, it's this:
Showing nodes accounting for 502.32MB, 95.70% of 524.88MB total
Dropped 1400 nodes (cum <= 2.62MB)
Showing top 10 nodes out of 91
flat flat% sum% cum cum%
305.43MB 58.19% 58.19% 305.43MB 58.19%
github.com/syncthing/syncthing/lib/scanner.(*walker).walk.func1
45.79MB 8.72% 66.91% 68.68MB 13.09%
github.com/syncthing/syncthing/lib/fs.(*BasicFilesystem).GetXattr
32MB 6.10% 73.01% 32.01MB 6.10%
github.com/syndtr/goleveldb/leveldb/memdb.New
22.89MB 4.36% 77.37% 22.89MB 4.36%
github.com/syncthing/syncthing/lib/fs.listXattr
22.89MB 4.36% 81.73% 22.89MB 4.36%
github.com/syncthing/syncthing/lib/protocol.(*PlatformData).SetXattrs
15.35MB 2.92% 84.66% 15.36MB 2.93%
github.com/syndtr/goleveldb/leveldb/util.(*BufferPool).Get
15.28MB 2.91% 87.57% 15.28MB 2.91% strings.(*Builder).grow
(The usage for xattrs is reduced from 976 MB to 68 MB)
LastSeen for a device was only updated when they connected. This now
updates it when they disconnect, so that we remember the last time we
actually saw them. When asking the API for current stats, currently
connected devices get a last seen value of the current time.
The string is currently hard-coded in English, so allow to translate it
into other languages. It appears mainly in the browser title bar before
logging in into the GUI or when the GUI is still loading.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds our short device ID to the basic auth realm. This has at least
two consequences:
- It is different from what's presented by another device on the same
address (e.g., if I use SSH forwards to different dives on the same
local address), preventing credentials for one from being sent to
another.
- It is different from what we did previously, meaning we avoid cached
credentials from old versions interfering with the new login flow.
I don't *think* there should be things that depend on our precise realm
string, so this shouldn't break any existing setups...
Sneakily this also changes the session cookie and CSRF name, because I
think `id.Short().String()` is nicer than `id.String()[:5]` and the
short ID is two characters longer. That's also not a problem...
### Purpose
The OCI image spec specifies well-defined
[annotations](https://github.com/opencontainers/image-spec/blob/main/annotations.md)
that can be added to images.
Theses annotations can then be used by other tools to gather more
information of an image.
This PR adds the `org.opencontainers.image.source` to allow tools such
as [renovate](https://github.com/renovatebot/renovate) to find the
release notes of a give version.
~~I've only done this change for `Dockerfile`. Should I also add the
label to the other dockerfiles?~~
I've now added the source annotations to all `Dockerfile`s & action
workflows.
### Testing
None, change was done by following the [renovate
documentation](https://docs.renovatebot.com/modules/datasource/docker/).
