* Fix bufferpool puts (ref #4976)
There was a logic error in Put() which made us put all large blocks into
segment zero, where we subsequently did not look for them.
I also added a lowest threshold, as we otherwise allocate a 128KiB
buffer when we need 24 bytes for a header and such.
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* smaller stress
* cap/len
* wip
* wip
This adds a certificate lifetime parameter to our certificate generation
and hard codes it to twenty years in some uninteresting places. In the
main binary there are a couple of constants but it results in twenty
years for the device certificate and 820 days for the HTTPS one. 820 is
less than the 825 maximum Apple allows nowadays.
This also means we must be prepared for certificates to expire, so I add
some handling for that and generate a new certificate when needed. For
self signed certificates we regenerate a month ahead of time. For other
certificates we leave well enough alone.
The relay and discosrv didn't use the new lib/build package, now they
do. Conversely the lib/build package wasn't aware there might be other
users and hard coded the program name - now it's set by the build
script
This adds a field `guiAddressUsed` to the system status response, that
holds the current listening address actually in use. This may be
different from the one stored in the config because it may have been
overridden by environment or command line flag.
The GUI now checks this field to see if we are listening on localhost.
If we are not, the authentication required warning is displayed,
regardless of the *configured* listening address.
This is an experiment in testing, based on the advise to always call
t.Parallel() at the start of every test. Doing so makes tests run in
parallel, which is usually faster, but also exposes package level state
and potential race conditions better.
To support this I had to redesign the CSRF manager to not be package
global, which was indeed an improvement. And tests run five times faster
now.
This splits large writes into smaller ones when using a rate limit,
making them into a legitimate trickle rather than large bursts with a
long time in between.
This is the result of:
- Changing build.go to take the protobuf version from the modules
instead of hardcoded
- `go get github.com/gogo/protobuf@v1.3.0` to upgrade
- `go run build.go proto` to regenerate our code
Assume a folder error was set due to bad ignores on the latest scan.
Previously, doing a manual rescan would result in:
1. Clearing the folder error, which schedules (immediately) an fs
watcher restart
2. Attempting to load the ignores, which fails, so we set a folder
error and bail.
3. Now the fs watcher restarts, as scheduled, so we trigger a scan.
Goto 1.
This change fixes this by not clearing the error until the error is
actually cleared, that is, if both the health check and ignore loading
succeeds.
This introduces a better set of defaults for large databases. I've
experimentally determined that it results in much better throughput in a
couple of scenarios with large databases, but I can't give any
guarantees the values are always optimal. They're probably no worse than
the defaults though.
NATSymmetricUDPFirewall actually is not NAT at all, but means the machine has a global IP address and an UDP firewall in front (RFC calls it Symmetric UDP Firewall). This is punchable fine, both theoretically and also practically in testing.
* lib/model: Don't panic on failed chmod-back on directory (fixes#5836)
This makes the "in writable dir"-wrapper log chmod-back errors instead
of panicking. To do that we need a logger so the function moved into the
model package which is also the only place it's used. The tests came
along.
(The test also exercised osutil.RenameOrCopy like some sort of
piggybacking. I removed that.)
This adds a set of magical environment variables that can be used to
tweak the database parameters. It's totally undocumented and not
intended to be a long term or supported thing.
It's ugly, but there is a backstory. I have a couple of large
installations where the database options are inefficient or otherwise
suboptimal (24/7 compaction going on and stuff like that). I don't
*know* the correct database parameters, nor yet the formula or method to
derive them by, so this requires experimentation. Experimentation needs
to happen partly in production, and rolling out new builds for every
tweak isn't practical. This provides override points for all reasonable
values, while not changing anything by default.
Ideally, at the end of such experimentation, we'll know which values are
relevant to change and in what manner, and can provide a more user
friendly knob to do so - or do it automatically based on the database
size.
* add skeleton for lib/syncthing
* copy syncthingMain to lib/syncthing (verbatim)
* Remove code to deduplicate copies of syncthingMain
* fix simple build errors
* move stuff from main to syncthing with minimal mod
* merge runtime options
* actually use syncthing.App
* pass io.writer to lib/syncthing for auditing
* get rid of env stuff in lib/syncthing
* add .Error() and comments
* review: Remove fs interactions from lib
* and go 1.13 happened
* utility functions
Per the sync/atomic bug note:
> On ARM, x86-32, and 32-bit MIPS, it is the caller's
> responsibility to arrange for 64-bit alignment of 64-bit words
> accessed atomically. The first word in a variable or in an
> allocated struct, array, or slice can be relied upon to be
> 64-bit aligned.
All atomic accesses of 64-bit variables in syncthing code base are
currently ok (i.e they are all 64-bit aligned).
Generally, the bug is triggered because of incorrect alignement
of struct fields. Free variables (declared in a function) are
guaranteed to be 64-bit aligned by the Go compiler.
To ensure the code remains correct upon further addition/removal
of fields, which would change the currently correct alignment, I
added the following comment where required:
// atomic, must remain 64-bit aligned
See https://golang.org/pkg/sync/atomic/#pkg-note-BUG.
* lib/versioner: Add placeholder to provide the absolute file path to external commands
This commit adds support for a new placeholder, %FILE_PATH_FULL%, to the
command of the external versioner. The placeholder will be replaced by
the absolute path of the file that should be deleted.
* Revert "lib/versioner: Add placeholder to provide the absolute file path to external commands"
This reverts commit fb48962b947358e90a76e87a7794adb6057de476.
* lib/versioner: Replace all placeholders in external command (fixes#5849)
Before this commit, only these placeholders were replaced that span a
whole word, for example "%FOLDER_PATH%". Words that consisted of more
than one placeholder or additional characters, for example
"%FOLDER_PATH%/%FILE_PATH%", were left untouched.
* fixup! lib/versioner: Replace all placeholders in external command (fixes#5849)
* lib/ur: Implement crash (panic) reporting (fixes#959)
This implements a simple crash reporting method. It piggybacks on the
panic log files created by the monitor process, picking these up and
uploading them from the usage reporting routine.
A new config value points to the crash receiver base URL, which defaults
to "https://crash.syncthing.net/newcrash" (following the pattern of
"https://data.syncthing.net/newdata" for usage reports, but allowing us
to separate the service as required).
* lib/fs, lib/model: Add error channel to Watch to avoid panics (fixes#5697)
* forgot unsupported watch
* and more non(-standard)-unixy fixes
* and windows test
* review
* lib/api, lib/connections, gui: Show connection error for disconnected devices (fixes#3345)
This adds functionality in the connetions service to track the last
error per address. That is in turn exposed in the /rest/system/status
API method, as that is also where we already show the listener status
from the connection service.
The GUI uses this info where it lists addresses, showing errors (if any)
in red underneath each address.
I also slightly refactored the existing status method on the connection
service to have a better name and return typed information.
* ok
* review
* formatting
* review
The check in ClusterConfig() when iterating through announced devices
in a folder explicitly skips entries without a non-zero IndexID.
Therefore, the check for IndexID == 0 just below will never be true
and the intended cleanup of local index data will not happen.
Plainly remove that check to make the intended case distinction work.
* lib/protocol: Wait for reader/writer loops on close (fixes#4170)
* waitgroup
* lib/model: Don't hold lock while closing connection
* fix comments
* review (lock once, func argument) and naming
* lib/model: Send cluster config before releasing pmut
* reshuffle
* add model.connReady to track cluster-config status
* Corrected comments/strings
* do it in protocol
This constructs the map of hashes of zero blocks from constants instead
of calculating it at startup time. A new test verifies that the map is
correct.
* cmd/syncthing, lib/gui: Separate gui into own package (ref #4085)
* fix tests
* Don't use main as interface name (make old go happy)
* gui->api
* don't leak state via locations and use in-tree config
* let api (un-)subscribe to config
* interface naming and exporting
* lib/ur
* fix tests and lib/foldersummary
* shorter URVersion and ur debug fix
* review
* model.JsonCompletion(FolderCompletion) -> FolderCompletion.Map()
* rename debug facility https -> api
* folder summaries in model
* disassociate unrelated constants
* fix merge fail
* missing id assignement
* lib/tlsutil: Enable TLS 1.3 when available, on test builds (fixes#5065)
This enables TLS 1.3 negotiation on Go 1.12 by setting the GODEBUG
variable. For now, this just gets enabled on test versions (those with a
dash in the version number).
Users wishing to enable this on production builds can set GODEBUG
manually.
The string representation of connections now includes the TLS version
and cipher suite. This becomes part of the log output on connections.
That is, when talking to an old client:
Established secure connection .../TLS1.2-TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
and now potentially:
Established secure connection .../TLS1.3-TLS_AES_128_GCM_SHA256
(The cipher suite was there previously in the log output, but not the
TLS version.)
I also added this info as a new Crypto() method on the connection, and
propagate this out to the API and GUI, where it can be seen in the
connection address hover (although with bad word wrapping sometimes).
* wip
* wip
Flush the batch when exceeding a certain size, instead of when reaching a number
of batched operations.
Move batch to lowlevel to be able to use it in NamespacedKV.
Increase the leveldb memory buffer from 4 to 16 MiB.
* cleanup Fatal in lib/config/config.go
* cleanup Fatal in lib/config/folderconfiguration.go
* cleanup Fatal in lib/model/model.go
* cleanup Fatal in cmd/syncthing/monitor.go
* cleanup Fatal in cmd/syncthing/main.go
* cleanup Fatal in lib/api
* remove Fatal methods from logger
* lowercase in errors.Wrap
* one less channel
I'm working through linter complaints, these are some fixes. Broad
categories:
1) Ignore errors where we can ignore errors: add "_ = ..." construct.
you can argue that this is annoying noise, but apart from silencing the
linter it *does* serve the purpose of highlighting that an error is
being ignored. I think this is OK, because the linter highlighted some
error cases I wasn't aware of (starting CPU profiles, for example).
2) Untyped constants where we though we had set the type.
3) A real bug where we ineffectually assigned to a shadowed err.
4) Some dead code removed.
There'll be more of these, because not all packages are fixed, but the
diff was already large enough.
This adds a folder option "CopyOwnershipFromParent" which, when set,
makes Syncthing attempt to retain the owner/group information when
syncing files. Specifically, at the finisher stage we look at the parent
dir to get owner/group and then attempt a Lchown call on the temp file.
For this to succeed Syncthing must be running with the appropriate
permissions. On Linux this is CAP_FOWNER, which can be granted by the
service manager on startup or set on the binary in the filesystem. Other
operating systems do other things, but often it's not required to run as
full "root". On Windows this patch does nothing - ownership works
differently there and is generally less of a deal, as permissions are
inherited as ACLs anyway.
There are unit tests on the Lchown functionality, which requires the
above permissions to run. There is also a unit test on the folder which
uses the fake filesystem and hence does not need special permissions.
To do so the BlockMap struct has been removed. It behaves like any other prefixed
part of the database, but was not integrated in the recent keyer refactor. Now
the database is only flushed when files are in a consistent state.
There was a problem in iterating the sequence index that could result
in missing updates. The issue is that while the index was (correctly)
iterated in a snapshot, the actual file infos were read dirty outside of
the snapshot. This fixes this by doing the reads inside the snapshot,
and also updates a couple of other places that did the same thing more
or less harmfully (I didn't investigate).
To avoid similar issues in the future I did some renaming of the
getFile* methods - the ones in a transaction are just getFile, while the
ones directly on the database are variants of getFileDirty to highlight
what's going on.
* lib/fs, lib/model: Improve filesystem operations during tests (fixes#5422)
Introduces MustFilesystem that panics on errors and should be used for operations
during testing which must never fail.
Create temporary directories outside of testdata.
* don't do a filesystem, just a wrapper around os for testing
* fix copyright
This avoids waiting until next ping and timeout until the connection is actually
closed both by notifying the peer of the disconnect and by immediately closing
the local end of the connection after that. As a nice side effect, info level
logging about dropped connections now have the actual reason in it, not a generic
timeout error which looks like a real problem with the connection.
