### Purpose
This PR contains the set of changes needed to make Syncthing work on iOS
for [my iOS app for
Syncthing](https://github.com/pixelspark/sushitrain).
Most changes originate from [the Mobius Sync
fork](http://github.com/MobiusSync/syncthing/tree/ios). I have removed
the changes from their fork that are not strictly needed for my app
(i.e. their changes to the GUI and command line utilities, for instance)
and squashed it all in a single commit.
In summary, the changes are:
* Resolve non-absolute paths to the 'Documents' folder (basically the
only one an app can/should write user data to by default on iOS)
* Tweaking of build flags/conditions for iOS (i.e. determine which
basicfs_watch, ignoreresult variant to build for iOS)
* Disable upgrade mechanism on iOS
* Make `RequestGlobal` and `PullerProgress` public symbols
* Expose syncthing.app's Model instance (app.M)
* Add no-op stub for SetLowPriority on iOS
I would very much appreciate these changes to be (eventually) merged to
mainline syncthing, as this would allow my iOS app to track the mainline
source code directly and removes the need (for me at least) for
maintaining a separate fork. Perhaps the Mobius folks can also benefit
from this (although as noted this branch does not contain their changes
to e.g. the GUI).
### Testing
This branch has been tested with the iOS app and appears to work fine.
The full set of MobiusSync changes has been used before with success.
### Screenshots
n/a
### Documentation
There should be no visible changes for users due to this set of changes.
---------
Co-authored-by: Simon Pickup <simon@pickupinfinity.com>
### Purpose
Avoid the issue where the folder marker is deleted by overzealous
cleanup tools because it's just a useless, empty directory.
We create a small file containing a an admonishment to not delete the
directory, and some metadata that is just for human consumption at the
moment. (But it would parse as a valid yaml file if we wanted to read
this, at some point.)
This will only apply when _creating_ a folder marker, that is, existing
setups will not gain the file automatically. Obviously, when using a
custom folder marker none of this applies.
Also, slightly adjust the permission bits for the folder marker directory and file on Unixes, making sure the group & write bits are unset.
### Testing
I've created and deleted a few folders and it appears to behave as I
expect.
### Screenshots
```
jb@ok:~/somefolder % ls -la
total 0
drwxr-xr-x 3 jb staff 96 May 1 08:52 ./
drwx------ 12 jb staff 384 May 1 08:52 ../
drwxr-xr-x 3 jb staff 96 May 1 08:52 .stfolder/
jb@ok:~/somefolder % ls -l .stfolder
total 8
-rw-r--r-- 1 jb staff 122 May 1 08:52 syncthing-folder-39a4b0.txt
jb@ok:~/somefolder % cat .stfolder/syncthing-folder-39a4b0.txt
# This directory is a Syncthing folder marker.
# Do not delete.
folderID: xtdca-cudyf
created: 2024-05-01T08:52:49+02:00
```
This is a refactor of the protocol/model interface to take the actual
message as the parameter, instead of the broken-out fields:
```diff
type Model interface {
// An index was received from the peer device
- Index(conn Connection, folder string, files []FileInfo) error
+ Index(conn Connection, idx *Index) error
// An index update was received from the peer device
- IndexUpdate(conn Connection, folder string, files []FileInfo) error
+ IndexUpdate(conn Connection, idxUp *IndexUpdate) error
// A request was made by the peer device
- Request(conn Connection, folder, name string, blockNo, size int32, offset int64, hash []byte, weakHash uint32, fromTemporary bool) (RequestResponse, error)
+ Request(conn Connection, req *Request) (RequestResponse, error)
// A cluster configuration message was received
- ClusterConfig(conn Connection, config ClusterConfig) error
+ ClusterConfig(conn Connection, config *ClusterConfig) error
// The peer device closed the connection or an error occurred
Closed(conn Connection, err error)
// The peer device sent progress updates for the files it is currently downloading
- DownloadProgress(conn Connection, folder string, updates []FileDownloadProgressUpdate) error
+ DownloadProgress(conn Connection, p *DownloadProgress) error
}
```
(and changing the `ClusterConfig` to `*ClusterConfig` for symmetry;
we'll be forced to use all pointers everywhere at some point anyway...)
The reason for this is that I have another thing cooking which is a
small troubleshooting change to check index consistency during transfer.
This required adding a field or two to the index/indexupdate messages,
and plumbing the extra parameters in umpteen changes is almost as big a
diff as this is. I figured let's do it once and avoid having to do that
in the future again...
The rest of the diff falls out of the change above, much of it being in
test code where we run these methods manually...
Cleanup after #9275.
This renames `fmut` -> `mut`, removes the deadlock detector and
associated plumbing, renames some things from `...PRLocked` to
`...RLocked` and similar, and updates comments.
Apart from the removal of the deadlock detection machinery, no
functional code changes... i.e. almost 100% diff noise, have fun
reviewing.
I'm tired of the fmut/pmut shenanigans. This consolidates both under one
lock; I'm not convinced there are any significant performance
differences with this approach since we're literally just protecting map
juggling...
- The locking goes away when we were already under an appropriate fmut
lock.
- Where we had fmut.RLock()+pmut.Lock() it gets upgraded to an
fmut.Lock().
- Otherwise s/pmut/fmut/.
In order to avoid diff noise for an important change I did not do the
following cleanups, which will be filed in a PR after this one, if
accepted:
- Renaming fmut to just mut
- Renaming methods that refer to being "PRLocked" and stuff like that
- Removing the no longer relevant deadlock detector
- Comments referring to pmut and locking sequences...
Before introducing the service map and using it for folder runners, the
entries in folderCfgs and folderRunners for the same key/folder were
removed under a single lock. Stopping the folder happens separately
before that with just the read lock. Now with the service map stopping
the folder and removing it from the map is a single operation. And that
still happens with just a read-lock. However even with a full lock it’s
still problematic: After the folder stopped, the runner isn’t present
anymore while the folder-config still is and sais the folder isn't
paused.
The index handler in turn looks at the folder config that is not paused,
thus assumes the runner has to be present -> nil deref on the runner.
A better solution might be to push most of these fmut maps into the
folder - they anyway are needed in there. Then there's just a single
map/source of info that's necessarily consistent. That's quite a bit of
work though, and probably/likely there will be corner cases there too.
LastSeen for a device was only updated when they connected. This now
updates it when they disconnect, so that we remember the last time we
actually saw them. When asking the API for current stats, currently
connected devices get a last seen value of the current time.
This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Instead of separately tracking the token.
Also changes serviceMap to have a channel version of RemoveAndWait, so
that it's possible to do the removal under a lock but wait outside of
the lock. And changed where we do that in connection close, reversing
the change that happened when I added the serviceMap in 40b3b9ad1.
* lib/versioner: Factor out DefaultPath constant.
Replace several instances where .stversions is named literally to all
use the same definition in the versioner package. Exceptions are the
packages where a cyclic dependency on versioner is impossible, or some
tests which combine the versions base path with other components.
* lib/versioner: Fix comment about trash can in simple versioner.
* lib/versioner: Fix wrong versioning type string in error message.
The error message shows the folder type instead of the versioning
type, although the correct field is used in the comparison.
This fixes various test issues with Go 1.20.
- Most tests rewritten to use fakefs where possible
- Some tests that were already skipped, or dubious (invasive,
unmaintainable, unclear what they even tested) have been removed
- Some actual code rewritten to better support testing in fakefs
Co-authored-by: Eric P <eric@kastelo.net>
This adds a cache to the expensive key generation operations. It's fixes
size LRU/MRU stuff to keep memory usage bounded under absurd conditions.
Also closes#8600.
* lib/connections: Cache isLAN decision for later external access.
The check whether a remote device's address is on a local network
currently happens when handling the Hello message, to configure the
limiters. Save the result to the ConnectionInfo and pass it out as
part of the model's ConnectionInfo struct in ConnectionStats().
* gui: Use provided connection attribute to distinguish LAN / WAN.
Replace the dumb IP address check which didn't catch common cases and
actually could contradict what the backend decided. That could have
been confusing if the GUI says WAN, but the limiter is not actually
applied because the backend thinks it's a LAN.
Add strings for QUIC and relay connections to also differentiate
between LAN and WAN.
* gui: Redefine reception level icons for all connection types.
Move the mapping to the JS code, as it is much easier to handle
multiple switch cases by fall-through there.
QUIC is regarded no less than TCP anymore. LAN and WAN make the
difference between levels 4 / 3 and 2 / 1:
{TCP,QUIC} LAN --> {TCP,QUIC} WAN --> Relay LAN --> Relay WAN -->
Disconnected.
This replaces old style errors.Wrap with modern fmt.Errorf and removes
the (direct) dependency on github.com/pkg/errors. A couple of cases are
adjusted by hand as previously errors.Wrap(nil, ...) would return nil,
which is not what fmt.Errorf does.
Locally paused folders will fail on checkFolderRunningLocked() and
therefore abort the loop. Avoid this by skipping paused folders
directly.
Co-authored-by: Jakob Borg <jakob@kastelo.net>
all: Add package runtimeos for runtime.GOOS comparisons
I grew tired of hand written string comparisons. This adds generated
constants for the GOOS values, and predefined Is$OS constants that can
be iffed on. In a couple of places I rewrote trivial switch:es to if:s,
and added Illumos where we checked for Solaris (because they are
effectively the same, and if we're going to target one of them that
would be Illumos...).
* lib/model: Override scan config for auto-accepted encrypted folders.
Encrypted folders should not have the fs watcher enabled and rarely
benefit from a scheduled rescan. The GUI adjusts the suggested
settings (watcher disabled, one day rescan interval) when accepting a
receive-encrypted folder. Mirror that behavior to the auto-accept
case where the GUI is not involved.
Versioning also does not work well for encrypted folders, same
treatment.
* lib/model: Remove bogus fields from connections API endpoint.
Switch the returned data type for the /rest/system/connections element
"total" to use only the Statistics struct. The other fields of the
ConnectionInfo struct are not populated and misleading.
* Lowercase JSON field names.
* lib/model: Get rid of ConnectionInfo.MarshalJSON().
It was missing the StartedAt field from the embedded Statistics
struct. Just lowercasing the JSON attribute names can be done just as
easily with annotations.
* lib/model: Remove bogus startedAt field from totals.
Instead of using the Statistics type with one field empty, just switch
to a free-form map with the three needed fields.
Like Windows and Mac, Android is also an interactive operating system.
On top of that, it usually runs on much slower hardware than the other
two. Because of that, it makes sense to limit the number of hashes used
by default there too.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
