### Purpose
Firefox uses the last specified favicon link for bookmarks, but only if
it is available on initial page load.
Remove the second link and use ng-href to change the icon instead.
I'm not really familiar with AngularJS, feel free to offer suggestions
for improvements.
### Testing
Briefly tested on Firefox 124.0.2 and Chrome 123.0.6312.105.
The commit 7e4e65ebf5 added links to
devices listed in the Shared With list in the folder info. However, it
only added them to those that had no superscript next to them.
With this change, the links are added to all devices regardless of
whether they have the superscript next to their names or not. The commit
also simplifies the code by using anchors directly instead of wrapping
them in spans.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This re-implements the stalled enhancement from #8808. Thanks @Craeckie
for the idea and first implementation draft!
If a folder is shared to a device with encryption, add a lock icon in
front of the device name under "Shared With" in the folder details
panel. Be careful not to add whitespace caused by line wraps in HTML
source code, which would defeat the purpose of keeping the icon glued to
the name by a non-breaking space.
Apply the same lock icon for the list of folders shared with a device.
This change was split off from #9355 as an independent clean-up / fix.
See that PR for review discussion, testing, and screenshots.
Improve the wrapping of folder labels / device names by going back to
word-wrapping, but making sure other spans, such as the trailing comma,
do not get separated from the label span.
* Avoid adding whitespace caused by line wraps in HTML source code.
The different cases within the ng-switch block are separated by
newlines for readability, but that gets parsed as whitespace. For
wrapping purposes, this should not happen, because then there is no
way to keep other HTML parts glued to the name / label in each list
entry.
* Simplify redundant conditional comma code.
The separating comma after a device name or folder label (all but the
last) should always stick to it. Use the HTML comment trick to avoid
whitespace and therefore a wrapping opportunity caused by the code
formatting newline. Thus the conditional comma only needs to be
defined once, not in each ng-switch case.
* Wrap at word boundaries and only break up words if necessary.
Use the overflow-wrap: break-word; style instead of word-break:
break-all;. While the latter is suitable for longish paths, breaking
device names or folder labels arbitrarily within words is ugly.
This also makes the the <sup> numbers actually stay glued to their
respective neighboring words.
Include legacy CSS alias "word-wrap" in the class definition.
* Fix indentation (unrelated).
gui: Remove non-functional HTML from External Versioning tooltip (ref
#8923)
Since [1], it is no longer possible to use HTML in tooltips. This was
addressed in [2], however the commit missed one instance of HTML that
was used to change the font type of the External versioning command
tooltip. This remaining HTML is removed in this commit.
[1] f5e5af391a
[2] 73c52eafb6
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Screenshots
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds a "token manager" which handles storing and checking expired
tokens, used for both sessions and CSRF tokens. It removes the old,
corresponding functionality for CSRFs which saved things in a file. The
result is less crap in the state directory, and active login sessions
now survive a Syncthing restart (this really annoyed me).
It also adds a boolean on login to create a longer-lived session cookie,
which is now possible and useful. Thus we can remain logged in over
browser restarts, which was also annoying... :)
<img width="1001" alt="Screenshot 2023-12-12 at 09 56 34"
src="https://github.com/syncthing/syncthing/assets/125426/55cb20c8-78fc-453e-825d-655b94c8623b">
Best viewed with whitespace-insensitive diff, as a bunch of the auth
functions became methods instead of closures which changed indentation.
gui: Show folder/device status on small screens
On larger screens, folder and device status is shown in a textual form
directly next to folder and device titles. However, on small screens,
only icons are currently shown, which may be ambiguous to new users, who
cannot possibly know what a specific icon means (see [1]). Thus, on
small screens only, display a new entry in folder/device info that
contains the same textual information that is shown in the title on
larger screens.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: André Colomb <src@andre.colomb.de>
Following up on #9192, this makes use of the new mechanism for the theme
names.
The dummy string added for testing is removed again here. All
translations are updated to the new nested syntax, except Chinese
(zh-HK) where the string weren't actually translated.
Some translations, especially single words or other short
labels for buttons and the like, may not be transferable between
contexts even if they happen to be equal in English. In these cases,
setting an explicit translation ID is important for context separation.
Angular Translate also supports nested JSON in translation tables,
addressed using `.` as namespace separator; this enhancement makes use
of this when extracting translation with an explicit translation ID.
Add an id attribute to the submit button shown on the login form. This
allows my password manager's form filling function to interact with the
button after filling in username and password (which already have the id
attribute in place).
Add a new entry to the unfolded device info to inform the user that the
device has been marked as "untrusted" and all folders shared with it
have to be password-protected or already Receive Encrypted.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Add a new entry to the unfolded device info to inform the user that the
device has Auto Accept enabled.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Currently, some of the information for folders and devices displayed in
the GUI relies on arbitrary values that come pre-set as defaults on a
fresh Syncthing installation, i.e. if the value matches the default, it
is hidden, and if does not, then it is displayed.
With this change, the GUI always displays all information regardless
of their value, making the overall experience more consistent and
predictable.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, different icons are used for File Versioning when displayed
in the unfolded folder info in the main part of the GUI, and the icon
used in the Edit Folder modal. This changes the main GUI icon to match
the icon used in the modal.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Remove footer and move links to header (fixes#5607)
Currently, the footer is always present and takes space at the bottom of
the GUI. However, the links listed there are not part of everyday user
interaction, and as such, they unnecessarily clutter the page, reducing
the usable screen space. Thus, transform the current Help link in the
header into a Help dropdown menu, and move the links from the footer
into it.
Also apply the following tweaks:
1. Move the About dialog from Actions to Help.
2. Add an Introduction (to the GUI) link to Help.
3. Change the Support icon from a question mark to a group of people.
4. Change the Changelog and About icons to a filled version to match the
other icons better.
5. Use a source code icon for Source Code instead of a wrench icon, and
move the wrench icon to Logs. This is done to prevent Changelog and
Logs from using the same icon.
6. Update all dropdown icons' Fork Awesome styles to "fa fa-fw <icon>".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* a few more Fork Awesome style updates
---------
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The reference comes from fd0a6225aa,
but the file itself was removed in the process of working on the pull
request, yet the reference to it was still left in the index.html.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This adds a word to the version string when running containerized. The
purpose is mostly to facilitate troubleshooting via screenshot by
"leaking" this rather important aspect of the setup. Additionally, the
version row gets "no-overflow-ellipsis" treatment so that the whole
thing is actually visible in the GUI and the (now useless) tooltip is
removed. In production releases this won't make a difference as the
whole thing will typically fit, but in odd setups it provides more info
up front.
* lib/connections: Cache isLAN decision for later external access.
The check whether a remote device's address is on a local network
currently happens when handling the Hello message, to configure the
limiters. Save the result to the ConnectionInfo and pass it out as
part of the model's ConnectionInfo struct in ConnectionStats().
* gui: Use provided connection attribute to distinguish LAN / WAN.
Replace the dumb IP address check which didn't catch common cases and
actually could contradict what the backend decided. That could have
been confusing if the GUI says WAN, but the limiter is not actually
applied because the backend thinks it's a LAN.
Add strings for QUIC and relay connections to also differentiate
between LAN and WAN.
* gui: Redefine reception level icons for all connection types.
Move the mapping to the JS code, as it is much easier to handle
multiple switch cases by fall-through there.
QUIC is regarded no less than TCP anymore. LAN and WAN make the
difference between levels 4 / 3 and 2 / 1:
{TCP,QUIC} LAN --> {TCP,QUIC} WAN --> Relay LAN --> Relay WAN -->
Disconnected.
gui: Add copy to clipboard, share by email, and share by SMS buttons to device IDs (fixes#2771, ref #3868)
Add buttons to allow for simpler sharing device IDs with others. The
first one copies the ID to clipboard (trying to use three different
methods, depending on the browser). The second one triggers a mailto
link with prefilled subject and body. The third one triggers an sms link
with prefilled body. The short description of Syncthing included in the
latter part of the body is a direct copy from the description at the
official website https://syncthing.net.
Issue #3868 is referred here, because the copy to clipboard button
offers an alternative method for IE11 users to actually be able to copy
device IDs without having to select it manually (which doesn't work).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, a disconnected device is marked as "Disconnected" without any
consideration whether the state is just temporary or rather it has been
like that for a long time, potentially requiring user intervention.
This commit adds a new state called "Disconnected (Inactive)" which is
shown for devices that have been disconnected for longer than a week. It
also changes the "Last seen" information, so that "Never" is used only
when the device hasn't connected at all, and the exact date is displayed
otherwise.
Additionally, when the date is older than 1 week, a note about that is
displayed below the date. Furthermore, when the date becomes older than
1 month, the note text colour changes to orange, and when it exceeds 1
year, the colour changes again to red. This is done to provide the user
with a visual clue that something may potentially be wrong and requires
a manual fix.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: André Colomb <src@andre.colomb.de>
Right now, the Out of Sync Items list for a specific remote device is
available only when the device is online and currently synchronising.
However, the list itself is being created by Syncthing all the time, so
there is no need to hide it from the user even when the remote device is
offline or paused. This way they can always easily check which files
exactly have not been synchronised yet.
In addition, the Out of Sync Items entry already includes file size next
to it, so there is no need to display it again next to the Sync Status
entry. Thus, remove out-of-sync file size from Sync Status, leaving only
percentage next to it.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
In large setups, it is currently impossible to know the exact number of
folders and remote devices without counting them manually, either in the
GUI or in config.xml. Thus, to provide this information to the user, add
a specific number right next to both Folders and Remote Devices headers
in the Web GUI. The numbers are only displayed when two or more folders
or devices are present.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, a custom JS script is used to select the whole device ID on
click. However, the current script isn't compatible with all browsers
(and in IE in particular), making it impossible to select the ID in them
at all. Additionally, the same functionality is already available in CSS
with no such drawbacks, as the whole selection process is handled by the
Web browser natively, which is lightweight and does not require custom
code.
Thus, remove the currently used JS script completely, replacing it with
a new CSS class that can be added to an element when required. If the
browser does not support the CSS, the user can still select the element
manually, which makes it safer than the current behaviour that can block
the user from being able to select the element at all.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the error message is often quite long and thus it appears
truncated with no possibility for the user to view the full string.
Thus, add a tooltip that displays the message in full on hover. This
follows the convention used in other parts of the GUI in similar cases.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* lib/locations: Fix enum values camelCase.
* lib/locations: Remove unused FailuresFile.
* cmd/syncthing: Turn around role of locations storage.
Previously the locations package was used to provide default paths,
possibly with an overridden home directory. Extra paths supplied on
the command line were handled and passed around in the options object.
To make the changed paths available to any other interested package,
override the location setting from the option if supplied, instead of
vice versa when not supplied. Adapt code using this to read from the
locations package instead of passing through the options object.
* lib/locations: Refactor showPaths to locations package.
Generate a reusable string in locations.PrettyPrintPaths().
Enumerating all possible locations in different packages is error
prone, so add a new public function to generate the listing as a
string in the locations package. Adapt cmd/syncthing --paths to use
that instead of its own console output.
* lib/locations: Include CSRF token in pretty printed paths.
* lib/api: New endpoint /rest/system/paths.
The paths should be available for troubleshooting from a running
instance. Using the --paths CLI option is not easy in some
environments, so expose the locations mapping to a JSON endpoint.
Add utility function ListExpandedPaths() that also filters out any
entries which still contain variable placeholders.
* gui: List runtime paths in separate log viewer tab.
* Wrap paths.
* lib/syncthing: Utilize locations.Get() instead of passing an arg.
* Include base directories, move label to table caption.
* gui: Switch to hard-coded paths instead of iterating over all.
* gui: Break aboutModalView into tabs.
Use tabs to separate authors from included third-party software.
* gui: Move paths from log viewer to about modal.
* lib/locations: Adjust pretty print output order to match GUI.
* gui, authors: Remove additional bot names and fix indent.
The indentation changed because of the tabbed about dialog, fix the
authors script to respect that.
Skip Syncthing*Automation in authors list as well.
* Update AUTHORS list to remove bot names.
* Revert AUTHORS email order change.
* Do not emphasize DB and log file locations.
* Review line wrapping.
* review part 1: strings.Builder, naming
* Rename and extend locations.Set() with error handling.
Remodel the Override() function along the existing SetBaseDir() and
rename it to simply Set(). Make sure to use absolute paths when given
log file or GUI assets override options. Add proper error reporting
if that goes wrong.
* Remove obsolete comment about empty logfile option.
* Don't filter out unexpanded baseDir placeholders, only ${timestamp}.
* Restore behavior regarding special "-" logfile argument.
If the option is given, but with empty value, assume the no log
file (same as "-"). Don't try to convert the special value to an
absolute path though and document this fact in a comment for the Set()
function.
* Use template to check for location key validity.
* Don't filter out timestamp placeholders.
* lib/api: Remove paths from /rest/system/status.
* lib/ur: Properly initialize map in failure data (fixes#8479)
Co-authored-by: Jakob Borg <jakob@kastelo.net>
Currently, there are two issues with the detailed staggered versioning
information displayed in the folder info. Firstly, the maxAge value of
365d is displayed despite matching the default. Secondly, there is no
consideration for the special case of maxAge equal to 0, meaning that
versions are kept forever.
This commit fixes both of those issues, so that the default maxAge is
not displayed and its value of 0 is displayed as "forever".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Similar to the "remote has not accepted sharing" message, add a
footnote number 2 to indicate a folder which will not sync with a
certain device because the remote has paused it. Applies to the edit
folder / device modals' sharing tab, as well as the "shared with"
listing and tooltips under device and folder details.
Currently, the "Latest Change" translation string is hard-coded to use
the English-like word order of V ("deleted") + N ("file"). As such, it
is incompatible with languages that require to use a different word
order, e.g. Korean or Japanese. In other words, a proper translation of
the string to those languages is currently impossible.
This commit changes the translation string, so that it includes the file
variable, and thanks to this, it can be easily adopted to languages with
different word order than English.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
