telegram-bot-bash/doc/7_develop.md

392 lines
18 KiB
Markdown
Raw Normal View History

2019-05-16 14:43:44 +00:00
#### [Home](../README.md)
2019-05-30 10:03:40 +00:00
2019-05-16 14:43:44 +00:00
## Notes for bashbot developers
This section is about help and best practices for new bashbot developers. The main focus on is creating new versions of bashbot, modules and addons, not on developing your individual bot. Nevertheless the information provided here should also help you with your bot development.
2019-05-16 14:43:44 +00:00
2020-09-27 17:41:08 +00:00
If you want to provide fixes or new features [fork bashbot on github](https://help.github.com/en/articles/fork-a-repo) and provide changes as [pull request on github](https://help.github.com/en/articles/creating-a-pull-request).
2019-05-16 14:43:44 +00:00
2019-05-29 16:33:54 +00:00
### Debugging Bashbot
Usually all bashbot output is discarded.
2020-12-29 09:18:41 +00:00
If you want to get error messages (and more) start bashbot `./bashbot.sh startbot debug`.
2020-05-14 13:47:04 +00:00
you can the change the level of verbosity of the debug argument:
```
"debug" all output is redirected to `DEBUG.log`, in addition every incoming message is logged in `MESSAGE.log` and `INLINE.log`
"xdebug" same as debug plus set bash option '-x' to log any executed command in `DEBUG.log`
2019-05-29 16:33:54 +00:00
```
2020-05-14 13:47:04 +00:00
Use the command `tail` to watch your bot live, e.g. `tail -f DEBUG.log`. To obtain more information place `set -x; ... set +x` around suspected code.
2020-05-14 13:47:04 +00:00
2021-01-05 18:40:21 +00:00
Sometimes it's useful to watch the bot live in the terminal:
2019-05-29 16:33:54 +00:00
2021-01-05 18:40:21 +00:00
```
"debugx" debug output and errors are sent to terminal
2021-01-05 18:42:36 +00:00
"xdebugx" same as debugx plus set bash option '-x' to show any executed command
2019-05-29 16:33:54 +00:00
```
Logging of Telegram update poll is disabled by default, also in `debug` mode. To enable it without using verbose `xdebug` mode
2020-11-29 09:58:06 +00:00
set `BASHBOT_UPDATELOG` to an empty value (not unset) `export BASHBOT_UPDATELOG=""`
2019-05-29 16:02:20 +00:00
### Modules and Addons
2020-12-29 09:18:41 +00:00
**Modules** resides in `modules/*.sh` and are colletions of optional bashbot functions grouped by functionality. Main reason for creating modules was
2020-06-23 14:35:50 +00:00
to keep 'bashbot.sh' small, while extending functionality. In addition not every function is needed by all bots, so you can
disable modules, e.g. by rename the respective module file to 'module.sh.off'.
2019-05-29 16:02:20 +00:00
Modules must use only functions provided by 'bashbot.sh' or the module itself and should not depend on other modules or addons.
The only mandatory module is 'module/sendMessage.sh'.
2019-05-29 16:02:20 +00:00
If an optional module is used in 'bashbot.sh' or 'commands.sh', the use of `_is_function` or
2020-12-29 09:18:41 +00:00
`_execute_if_function` is mandatory to catch absence of the module.
2019-05-29 16:02:20 +00:00
2020-12-29 09:18:41 +00:00
**Addons** resides in `addons/*.sh.dist` and are not enabled by default. To activate an addon rename it to end with '.sh', e.g. by
`cp addons/example.sh.dist addons/example.sh`.
2020-06-23 14:35:50 +00:00
Addons must register themself to BASHBOT_EVENTS at startup, e.g. to call a function every time a message is received.
Addons works similar as 'commands.sh' and 'mycommands.sh' but are much more flexible on when functions/commands are triggered.
2020-06-12 08:00:52 +00:00
Another major difference is: While regular command processing is done in a new sub shell for every command,
**Addons are executed in the context of bashbot event loop!**, This is why event functions are (time) critical
and must return as fast as possible. **If an event function call exit, also bashbot exits!**
2020-06-12 09:11:17 +00:00
*Important*: Spawn a new sub shell in background for your processing commands and when calling bashbot functions, e.g. send_messages.
This prevents blocking or exiting bashbots event loop.
2019-05-29 16:02:20 +00:00
2019-05-30 10:03:40 +00:00
#### Bashbot Events
Addons must register functions to bashbot events by providing their name, and internal identifier and a callback function.
2020-06-23 14:35:50 +00:00
If an event occurs each registered function for the event is called.
2019-05-29 16:33:54 +00:00
Registered functions run in the same process as bashbot, not as a sub process, so variables set here are persistent as long bashbot is running.
2019-05-29 16:33:54 +00:00
Note: For the same reason event function MUST return immediately! Time consuming tasks must be run as a background process, e.g. "long running &"
2019-05-29 16:33:54 +00:00
##### SEND RECEIVE events
A RECEIVE event is executed when a Message is received, same iQuery / Message variables are available as in commands.sh
2019-05-29 16:33:54 +00:00
* `BASHBOT_EVENT_INLINE` an inline query is received
* `BASHBOT_EVENT_MESSAGE` any of the following message types is received
* `BASHBOT_EVENT_TEXT` a message containing text is received
* `BASHBOT_EVENT_CMD` a message containing a command is received (starts with /)
* `BASHBOT_EVENT_REPLYTO` a reply to a message is received
* `BASHBOT_EVENT_FORWARD` a forwarded message is received
* `BASHBOT_EVENT_CONTACT` a contact is received
* `BASHBOT_EVENT_LOCATION` a location or a venue is received
* `BASHBOT_EVENT_FILE` a file is received
2019-05-30 10:03:40 +00:00
*usage*: BASHBOT_EVENT_xxx[ "unique-name" ]="callback"
2019-05-29 16:33:54 +00:00
"unique-name" can be every alphanumeric string incl. '-' and '_'. Per convention the name of the addon followed by an internal identyfier should be used.
2019-06-04 08:55:06 +00:00
"callback" is called as the the parameters "event" "unique-name" "debug", where "event" is the event name in lower case, e.g. inline, messagei, text ... ,
and "unique-name" is the name provided when registering the event.
*Example:* Register a function to echo to any Text sent to the bot
2020-12-29 09:18:41 +00:00
2019-05-29 16:33:54 +00:00
```bash
# register callback:
2019-05-30 10:03:40 +00:00
BASHBOT_EVENT_TEXT["example_1"]="example_echo"
2019-05-29 16:33:54 +00:00
2019-05-30 10:14:23 +00:00
# function called if a text is received
2019-05-29 16:33:54 +00:00
example_echo() {
2019-06-04 08:55:06 +00:00
local event="$1" key="$2"
2020-06-23 14:35:50 +00:00
# all available bashbot functions and variables can be used
2020-06-12 08:00:52 +00:00
send_normal_message "${CHAT[ID]}" "Event: ${event} Key: ${key} : ${MESSAGE[0]}" & # run in background!
2020-06-12 08:00:52 +00:00
( MYTEXT="${MESSAGE[0]}"
do_more_processing
) & # run as sub shell in background!
2019-05-29 16:33:54 +00:00
}
2019-05-16 14:43:44 +00:00
```
2019-05-29 16:33:54 +00:00
2020-06-11 10:37:36 +00:00
An SEND event is executed when a Message is send to telegram.
2020-06-11 10:17:07 +00:00
2020-12-29 09:18:41 +00:00
* `BASHBOT_EVENT_SEND` is executed if data is send or uploaded to Telegram server
2020-06-23 14:35:50 +00:00
In contrast to other events, BASHBOT_EVENT_SEND is executed in a sub shell, so there is no need to spawn
a background process for longer running commands and changes to variables are not persistent!
BASHBOT_EVENT_SEND is for logging purposes, you must not send messages while processing this event.
To avoid wrong use of EVENT_SEND, e.g. fork bomb, event processing is suspended if recursion is detected.
*usage*: BASHBOT_EVENT_SEND[ "unique-name" ]="callback"
2020-06-23 14:35:50 +00:00
"callback" is called with parameter "send" or "upload", followed by the arguments used for 'sendJson' or 'upload' functions.
*Example:*
```bash
# register callback:
BASHBOT_EVENT_SEND["example_log","1"]="example_log"
EXAMPLE_LOG="${BASHBOT_ETC:-.}/addons/${EXAMPLE_ME}.log"
# Note: do not call any send message functions from EVENT_SEND!
example_log(){
local send="$1"; shift
echo "$(date): Type: ${send} Args: $*" >>"${EXAMPLE_LOG}"
}
```
##### TIMER events
2020-06-23 14:35:50 +00:00
Important: Bashbot timer tick is disabled by default and must be enabled by setting BASHBOT_START_TIMER to any value not zero.
2020-12-29 09:18:41 +00:00
* `BASHBOT_EVENT_TIMER` is executed every minute and can be used in 3 variants: oneshot, once a minute, every X minutes.
Registering to BASHBOT_EVENT_TIMER works similar as for message events, but you must add a timing argument to the name.
2020-06-23 14:35:50 +00:00
EVENT_TIMER is triggered every 60s and waits until the current running command is finished, so it's not exactly every
minute, but once a minute.
2020-12-29 09:18:41 +00:00
Every time EVENT_TIMER is triggered the variable "EVENT_TIMER" is increased. each callback is executed if `EVENT_TIMER % time` is '0' (true).
This means if you register an every 5 minutes callback first execution may < 5 Minutes, all subsequent executions are once every 5. Minute.
2019-05-29 16:33:54 +00:00
*usage:* BASHBOT_EVENT_TIMER[ "name" , "time" ], where time is:
2019-05-29 16:33:54 +00:00
2019-05-30 10:14:23 +00:00
* 0 ignored
* 1 execute once every minute
2019-05-30 10:14:23 +00:00
* x execute every x minutes
2020-06-23 14:35:50 +00:00
* -x execute once WITHIN the next x Minutes (next 10 Minutes since start "event")
2019-06-04 08:55:06 +00:00
Note: If you want exact "in x minutes" use "EVENT_TIMER" as reference: `(EVENT_TIMER +x)`
2019-05-29 16:33:54 +00:00
*Example:*
2019-05-29 16:33:54 +00:00
```bash
# register callback:
BASHBOT_EVENT_TIMER["example_every","1"]="example_everymin"
2019-05-29 16:33:54 +00:00
# function called every minute
example_everymin() {
# timer events has no chat id, so send to yourself
send_normal_message "$(< "${BOTADMIN})" "$(date)" & # note the &!
}
# register other callback:
BASHBOT_EVENT_TIMER["example_every5","5"]="example_every5min"
2019-05-29 16:33:54 +00:00
# execute once on the next 10 minutes since start "event"
BASHBOT_EVENT_TIMER["example_10min","-10"]="example_in10min"
2019-06-04 08:55:06 +00:00
# once in exact 10 minutes, note the -
BASHBOT_EVENT_TIMER["example_10min","-$(( EVENT_TIMER+10 ))"]="example_in10min"
2019-05-16 14:43:44 +00:00
```
2019-05-29 16:33:54 +00:00
----
#### Create a stripped down version of your Bot
2019-05-16 14:43:44 +00:00
Currently bashbot is more a bot development environment than a bot, containing examples, developer scripts, modules, documentation and more.
You don't need all these files after you're finished with your cool new bot.
Let's create a stripped down version:
2020-12-26 19:37:07 +00:00
- delete all modules you do not need from `modules`, e.g. `modules/inline.sh` if you don't use inline queries
- delete unused standard commands and messages from `commands.sh`
- delete unused commands and functions from `mycommands.sh`
2020-12-26 19:37:07 +00:00
- run `dev/make-standalone.sh` to create a a stripped down version of your bot
2019-05-16 14:43:44 +00:00
2020-12-29 09:18:41 +00:00
Now have a look at the directory `standalone`, here you find the files `bashbot.sh` and `commands.sh` containing everything to run your bot.
2019-05-16 14:43:44 +00:00
[Download make-standalone.sh](https://github.com/topkecleon/telegram-bot-bash/blob/master/dev/make-standalone.sh) from github.
### Setup your develop environment
2020-12-26 19:37:07 +00:00
1. install the commands git [shellcheck](5_practice.md#Test-your-Bot-with-shellcheck) bc pandoc zip codespell
2019-05-16 14:43:44 +00:00
2. setup your [environment for UTF-8](4_expert.md#Setting-up-your-Environment)
2020-12-26 19:37:07 +00:00
3. clone your bashbot fork to a new directory `git clone https://github.com/<YOURNAME>/telegram-bot-bash.git`, replace `<YOURNAME>` with your username on github
4. create and change to your develop branch `git checkout -b develop`
5. give your (dev) fork a new version tag: `git tag v1.xx`
6. setup github hooks by running `dev/install-hooks.sh`
Run `dev/make-distribution.sh` to create installation archives and a test installation in `DIST/`.
To update the test installation, e.g. after git pull, local changes or switch master/develop, run `dev/make-distribution.sh` again.
2020-12-27 20:17:39 +00:00
Note for Debian: Debian Buster ships older versions of many utilities, pls try to install from [buster-backports](https://backports.debian.org/Instructions/)
```bash
sudo apt-get -t buster-backports install git shellcheck pandoc codespell curl
```
2019-05-16 14:43:44 +00:00
2019-05-30 10:03:40 +00:00
#### Test, Add, Push changes
2019-05-16 14:43:44 +00:00
A typical bashbot develop loop looks as follow:
1. start developing - *change, copy, edit bashbot files ...*
2. after changing a bash script: `shellcheck -x script.sh`
2020-12-29 09:18:41 +00:00
3. `dev/all-tests.sh` - *in case if errors back to 2.*
4. `dev/git-add.sh` - *check for changed files, update version string, run git add*
5. `git commit -m "COMMIT MESSAGE"; git push`
2019-05-16 14:43:44 +00:00
2020-06-23 14:35:50 +00:00
**If you setup your dev environment with hooks and use the scripts above, versioning, adding and testing is done automatically.**
2019-05-16 14:43:44 +00:00
2019-05-30 10:03:40 +00:00
#### common commands
2019-05-16 14:43:44 +00:00
We state bashbot is a bash only bot, but this is not true. bashbot is a bash script using bash features PLUS external commands.
2021-01-02 05:17:02 +00:00
Usually bash is used in a Linux/Unix environment where many (GNU) commands are available, but if commands are missing, bashbot may not work.
2019-05-16 14:43:44 +00:00
2021-01-02 05:17:02 +00:00
To avoid this and make bashbot working on as many platforms as possible - from embedded Linux to mainframe - I recommend to restrict
2019-05-16 14:43:44 +00:00
ourself to the common commands provided by bash and coreutils/busybox/toybox.
See [Bash Builtins](https://www.gnu.org/software/bash/manual/html_node/Shell-Builtin-Commands.html),
[coreutils](https://en.wikipedia.org/wiki/List_of_GNU_Core_Utilities_commands),
[busybox](https://en.wikipedia.org/wiki/BusyBox#Commands) and [toybox](https://landley.net/toybox/help.html)
2020-06-23 14:35:50 +00:00
Available commands in bash, coreutils, busybox and toybox. Do you find curl on the list?
2019-05-16 14:43:44 +00:00
```bash
.*, [*, [[*, basename, break, builtin*, bzcat, caller*, cat, cd*, chattr,
chgrp, chmod, chown, clear, command*, continue *, cp, cut, date, declare*,
dc, dd, df, diff, dirname, du, echo*, eval*, exec*, exit *, expr*, find,
fuser, getopt*, grep, hash*, head, hexdump, id, kill, killall, last, length,
less, let*, ln, local*, logname, ls, lsattr, lsmod, man, mapfile*, md5sum, mkdir,
mkfifo, mknod, more, mv, nice, nohup, passwd, patch, printf*, ps, pwd*, read*,
readarray*, readonly* return*, rm, rmdir, sed, seq, sha1sum, shift*, sleep,
source*, sort, split, stat, strings, su, sync, tail, tar, tee, test,
time, times*, timeout, touch, tr, trap*, true, umask*, usleep, uudecode,
uuencode, wc, wget, which, who, whoami, xargs, yes
```
2020-06-23 14:35:50 +00:00
commands marked with \* are bash builtins, all others are external programs. Calling an external program is more expensive then using bulitins
or using an internal replacement. Here are some tipps for using builtins.:
2019-05-16 14:43:44 +00:00
```bash
HOST="$(hostname)" -> HOST="$HOSTNAME"
DIR="$(pwd)" -> DIR="$PWD""
2019-05-16 14:43:44 +00:00
seq 1 100 -> {0..100}
data="$(cat file)" -> data="$(<"file")"
DIR="$(dirname $0) -> DIR="${0%/*}"
2019-05-16 14:43:44 +00:00
date -> printf"%(%c)T\n" -1 # 100 times faster!
PROG="($basename $0)" -> PROG="${0##*/}*
2019-05-16 14:43:44 +00:00
ADDME="$ADDME something to add" -> ADDME+=" something to add""
2019-05-16 14:43:44 +00:00
VAR="$(( 1 + 2 ))" -> (( var=1+2 ))
INDEX="$(( ${INDEX} + 1 ))" -> (( INDEX++ ))
2021-01-07 07:58:34 +00:00
```
2021-01-08 14:29:36 +00:00
For more examples see [Pure bash bible](https://github.com/dylanaraps/pure-bash-bible)
2019-05-16 14:43:44 +00:00
2021-01-07 08:00:48 +00:00
The special variable `$_` stores the expanded __last__ argument of the previous command.
2021-01-08 14:29:36 +00:00
This allows a nice optimisation in combination with the no-op command `:`, but be aware of `$_` pitfalls.
2021-01-07 07:58:34 +00:00
```bash
2021-01-08 14:29:36 +00:00
# $_ example: mkdir plus cd to it
mkdir "somedir-$$" && cd "$_" # somedir-1234 (process id)
2021-01-07 07:58:34 +00:00
# manipulate a variable multiple times without storing intermediate results
2021-01-08 14:29:36 +00:00
foo="1a23_b__x###"
2021-01-07 07:58:34 +00:00
...
2021-01-08 14:29:36 +00:00
: "${foo//[0-9]}" # a_b__x###
: "${_%%#*}" # a_b__x
2021-01-07 07:58:34 +00:00
bar="${_/__x/_c}" # a_b_c
# BE AWARE OF ...
2021-01-08 14:29:36 +00:00
# pitfall missing quotes: $_ is LAST arg
: ${SOMEVAR} # "String in var" $_ -> "var"
: $(<"file") # "Content of\n file" $_ -> "file"
# pitfall [ vs. test command
[ -n "xxx" ] && echo "$_" # $_ -> "]"
test -n "xxx" && echo "$_" # $_ -> "xxx"
2021-01-08 14:29:36 +00:00
# pitfall command substitution: globbing and IFS is applied!
2021-01-07 07:58:34 +00:00
: "$(echo "a* is born")"# $_ -> a* is globbed even quoted!
2021-01-08 14:29:36 +00:00
: "$(echo "a b c")"# $_ -> "a b c"
2021-01-07 07:58:34 +00:00
: "$(<"file")" # "Content of\n file" $_ -> "Content of file"
2019-05-16 14:43:44 +00:00
```
2019-05-30 10:03:40 +00:00
#### Prepare a new version
2019-05-16 14:43:44 +00:00
After some development it may time to create a new version for the users. a new version can be in sub version upgrade, e.g. for fixes and smaller additions or
2020-12-29 09:18:41 +00:00
a new release version for new features. To mark a new version use `git tag NEWVERSION` and run `dev/version.sh` to update all version strings.
2019-05-16 14:43:44 +00:00
Usually I start with pre versions and when everything looks good I push out a release candidate (rc) and finally the new version.
```
v0.x-devx -> v0.x-prex -> v0.x-rc -> v0.x ... 0.x+1-dev ...
```
2020-12-29 09:18:41 +00:00
If you release a new Version run `dev/make-distribution.sh` to create the zip and tar.gz archives in the dist directory and attach them to the github release. Do not forget to delete directory dist afterwards.
2019-05-16 14:43:44 +00:00
2019-05-30 10:03:40 +00:00
#### Versioning
2019-05-16 14:43:44 +00:00
Bashbot is tagged with version numbers. If you start a new development cycle you can tag your fork with a version higher than the current version.
2020-12-29 09:18:41 +00:00
E.g. if you fork 'v0.60' the next develop version should tagged as `git tag "v0.61-dev"` for fixes or `git tag "v0.70-dev"` for new features.
2019-05-16 14:43:44 +00:00
2020-12-29 09:18:41 +00:00
To get the current version name of your develepment fork run `git describe --tags`. The output looks like `v0.70-dev-6-g3fb7796` where your version tag is followed by the number of commits since you tag your branch and followed by the latest commit hash. see also [comments in version.sh](../dev/version.sh)
2019-05-16 14:43:44 +00:00
2020-12-29 09:18:41 +00:00
To update the Version Number in files run `dev/version.sh files`, it will update the line '#### $$VERSION$$ ###' in all files to the current version name.
2019-05-16 14:43:44 +00:00
To update version in all files run 'dev/version.sh' without parameter.
2019-05-30 10:03:40 +00:00
#### Shellcheck
2019-05-16 14:43:44 +00:00
For a shell script running as a service it's important to be paranoid about quoting, globbing and other common problems. So it's a must to run shellchek on all shell scripts before you commit a change. this is automated by a git hook activated in Setup step 6.
To run shellcheck for a single script run `shellcheck -x script.sh`, to check all scripts run `dev/hooks/pre-commit.sh`.
2019-05-16 14:43:44 +00:00
2020-06-23 14:11:45 +00:00
### bashbot test suite
Starting with version 0.70 bashbot has a test suite. To start the test suite run `dev/all-tests.sh`. all-tests.sh will return 'SUCCESS' if ALL tests pass.
2019-05-16 14:43:44 +00:00
2019-05-30 10:03:40 +00:00
#### enabling / disabling tests
2019-05-16 14:43:44 +00:00
All tests are placed in the directory `test`. To disable a test remove the execute flag from the '*-test.sh' script, to (re)enable a test make the script executable again.
2019-05-16 14:43:44 +00:00
2019-05-30 10:03:40 +00:00
#### creating new tests
2020-12-29 09:18:41 +00:00
To create a new test run `test/ADD-test-new.sh` and answer the questions, it will create the usually needed files and dirs:
2019-05-16 14:43:44 +00:00
2020-12-29 09:18:41 +00:00
Each test consists of a script script named after `p-name-test.sh` *(where p is test pass 'a-z' and name the name
of your test)* and an optional dir `p-name-test/` *(script name minus '.sh')* for additional files.
2019-05-16 14:43:44 +00:00
Tests with no dependency to other tests will run in pass 'a', tests which need an initialized bashbot environment must run in pass 'd' or later.
2019-05-16 14:43:44 +00:00
A temporary test environment is created when 'ALL-tests.sh' starts and deleted after all tests are finished.
2020-12-29 09:18:41 +00:00
The file `ALL-tests.inc.sh` must be included from all tests and provide the test environment as shell variables:
2019-05-16 14:43:44 +00:00
```bash
2020-06-23 14:11:45 +00:00
# Test Environment
2019-05-16 14:43:44 +00:00
TESTME="$(basename "$0")"
DIRME="$(pwd)"
TESTDIR="$1"
LOGFILE="${TESTDIR}/${TESTME}.log"
REFDIR="${TESTME%.sh}"
TESTNAME="${REFDIR//-/ }"
# common filenames
TOKENFILE="token"
ACLFILE="botacl"
COUNTFILE="count"
ADMINFILE="botadmin"
DATADIR="data-bot-bash"
# SUCCESS NOSUCCESS -> echo "${SUCCESS}" or echo "${NOSUCCESS}"
2019-05-16 14:43:44 +00:00
SUCCESS=" OK"
NOSUCCESS=" FAILED!"
# default input, reference and output files
INPUTFILE="${DIRME}/${REFDIR}/${REFDIR}.input"
REFFILE="${DIRME}/${REFDIR}/${REFDIR}.result"
OUTPUTFILE="${TESTDIR}/${REFDIR}.out"
```
Example test
```bash
#!/usr/bin/env bash
# file: b-example-test.sh
# include common functions and definitions
# shellcheck source=test/ALL-tests.inc.sh
source "./ALL-tests.inc.sh"
if [ -f "${TESTDIR}/bashbot.sh" ]; then
echo "${SUCCESS} bashbot.sh exist!"
exit 0
else
echo "${NOSUCCESS} ${TESTDIR}/bashbot.sh missing!"
exit 1
fi
```
#### [Prev Function Reference](6_reference.md)
2021-02-04 17:13:32 +00:00
#### $$VERSION$$ v1.40-0-gf9dab50
2019-05-16 14:43:44 +00:00