"Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.":"另外，完整地重新掃瞄的間隔將增大（時間 60，例如：新的預設值為 1 小時）。您也可以在選擇「否」後，手動配置每個資料夾的時間間隔。",
"All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.":"所有與此裝置分享的資料夾必須使用密碼保護起來，如此一來，沒有提供密碼將無法閱覽資料。",
"An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.":"外部指令接管了版本控制。它必須將檔案自分享資料夾中移除。如果應用程式的路徑包含了空格，則必須使用雙引號刮起。",
"Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.":"Syncthing 現在能持續地監視變動了。此機制將偵測到磁碟上的變動並僅對修改過的項目發起掃描。優點是檔案的變動將更快地傳播，並且減少完整掃描的需求。",
"Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).":"停用比較與同步檔案權限。在沒有或自定義權限的系統上很有用（例如FAT、exFAT、Synology、Android）。",
"Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.":"請輸入一非負數（如：\"2.35\"）並選擇一個單位。百分比表示佔用磁碟容量的大小。",
"Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.":"輸入以半形逗號分隔的 (\"tcp://ip:port\", \"tcp://host:port\") 位址列表，或者填入 \"dynamic\" 以啟用自動探索位址。",
"Files are moved to .stversions directory when replaced or deleted by Syncthing.":"當檔案被 Syncthing 取代或刪除時，它們將被移至 .stversions 資料夾。",
"Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.":"當檔案被 Syncthing 取代或刪除時，它們將被移至 .stversions 資料夾並添加日期戳記。",
"Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.":"其他裝置做的改變不會影響此裝置上的檔案，但在此裝置上的變動將被發送到叢集的其他部分。",
"Folder type \"{%receiveEncrypted%}\" can only be set when adding a new folder.":"Folder type \"{{receiveEncrypted}}\" can only be set when adding a new folder.",
"Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.":"資料夾類型 \"{{receiveEncrypted}}\" 無法在新增後變更。您需要移除資料夾、刪除或解密磁碟上的資料，並再次新增資料夾。",
"For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.":"啟動監視下列資料夾時發生錯誤。由於每分鐘將進行重試，錯誤可能很快就消失。若錯誤仍存在，請嘗試修復潛在問題，或請求協助。",
"However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.":"但是，當前設定表明您可能不希望啟用它。我們為您停用了當機自動回報。",
"If untrusted, enter encryption password":"如未受信任，請輸入加密密碼",
"If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.":"如果您想防止在此電腦上的其他使用者存取 Syncthing 及其文件，請考慮設定身份驗證。",
"Ignore patterns can only be added after the folder is created. If checked, an input field to enter ignore patterns will be presented after saving.":"Ignore patterns can only be added after the folder is created. If checked, an input field to enter ignore patterns will be presented after saving.",
"Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for":"資料夾在本機的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑：",
"Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).":"儲存歷史版本的路徑（共享資料夾中的預設 .stversions 目錄則留白）。",
"Permanently add it to the ignore list, suppressing further notifications.":"Permanently add it to the ignore list, suppressing further notifications.",
"Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.":"候選發行版包含最新的功能及修補。與傳統 Syncthing 雙週發行版相似。",
"Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.":"代替裝置識別碼顯示在叢集狀態中。這段文字將會廣播到其他的裝置作為一個可選的預設名稱。",
"Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.":"代替裝置識別碼顯示在叢集狀態中。本欄若未填寫則將被更新為此裝置所廣播的名稱。",
"Some discovery methods could not be established for finding other devices or announcing this device:":"Some discovery methods could not be established for finding other devices or announcing this device:",
"Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.":"僅儲存並同步已加密的資料。所有位於已連接裝置上的資料夾，必須設定相同的密碼，或屬於 \"{{receiveEncrypted}}\" 類型。",
"Syncthing is listening on the following network addresses for connection attempts from other devices:":"Syncthing is listening on the following network addresses for connection attempts from other devices:",
"Syncthing is not listening for connection attempts from other devices on any address. Only outgoing connections from this device may work.":"Syncthing is not listening for connection attempts from other devices on any address. Only outgoing connections from this device may work.",
"Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…":"Syncthing 似乎離線了，或者您的網際網路連線出現問題。正在重試...",
"Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.":"Syncthing 在處理您的請求時似乎遇到了問題。請重新整理本頁面，若問題持續發生，請重新啟動 Syncthing。",
"The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.":"GUI 位址已被自啟動選項覆寫。當覆寫啟用時，此處變更將不會生效。",
"The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.":"組態已經儲存但尚未啟用。Syncthing 必須重新啟動以便啟用新的組態。",
"The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).":"其它裝置的裝置識別碼可在它們的 \"操作 > 顯示識別碼\" 對話框找到。空白及連接符號可省略。",
"The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.":"經過加密的數據報告將每日傳送。報告是用來追蹤常用的平台、資料夾大小以及應用程式版本。若傳送的資料集有異動，您將再次看到此對話框。",
"The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.":"輸入的裝置識別碼似乎無效。它應該為一串長度為 52 或 56 個字元長的半形英文字母及數字，並可能會含有額外的空白或連接符號。",
"The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.":"The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.",
"The folder content on this device will be overwritten to become identical with other devices. Files newly added here will be deleted.":"The folder content on this device will be overwritten to become identical with other devices. Files newly added here will be deleted.",
"The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.":"使用下列的間隔：在第一個小時內每 30 秒保留一個版本，在第一天內每小時保留一個版本，在第 30 天內每一天保留一個版本，在達到最長保留時間前每一星期保留一個版本。",
"The following methods are used to discover other devices on the network and announce this device to be found by others:":"The following methods are used to discover other devices on the network and announce this device to be found by others:",
"This device cannot automatically discover other devices or announce its own address to be found by others. Only devices with statically configured addresses can connect.":"This device cannot automatically discover other devices or announce its own address to be found by others. Only devices with statically configured addresses can connect.",
"Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.":"當檔案歷史版本的存留時間大於設定的最大值，或是其數量在一段時間內超出允許值時，則會被刪除。",
"Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".":"警告，此路徑是現存資料夾 \"{{otherFolder}}\" 的上級目錄。",
"Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).":"警告，此路徑是現存資料夾 \"{{otherFolderLabel}}\" ({{otherFolder}}) 的上級目錄。",
"Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".":"警告，此路徑是現存資料夾 \"{{otherFolder}}\" 的下級目錄。",
"Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).":"警告，此路徑是現存資料夾 \"{{otherFolderLabel}}\" ({{otherFolder}}) 的下級目錄。",
"Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.":"警告：如果您正在使用外部監視工具，如 {{syncthingInotify}}，您應該確認已經將其關閉。",
"When adding a new device, keep in mind that this device must be added on the other side too.":"當新增一個裝置時，務必記住，當前的這個裝置也同樣必須被添加至另一邊。",
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.":"當新增一個資料夾時，請記住，資料夾識別碼是用來將裝置之間的資料夾綁定在一起的。它們有區分大小寫，且必須在所有裝置之間完全相同。",
