I came accross this in another context and didn't investigate fully, but
literally ten lines above this code, in another method, we say that
filesets _must_ be created under the lock. It's either one or the other
and I'm taking the safer route here.
---------
Co-authored-by: Simon Frei <freisim93@gmail.com>
Encrypted-to-encrypted connections (i.e., ones where both sides set a
password) used to work but were broken in the 1.28.0 release. The
culprit is the 5342bec1b refactor which slightly changed how the request
was constructed, resulting in a bad block hash field.
Co-authored-by: Simon Frei <freisim93@gmail.com>
### Purpose
When generating a new `config.xml` file with default options, the GUI
address is populated with a hard-coded default value of
`127.0.0.1:8384`, except for a random free port if that default one is
occupied. This is independent from the GUI configuration default address
defined in the protobuf description. More importantly, it ignores any
`STGUIADDRESS` override given via environment variable or command-line
option, thus probing for the default port instead of the one specified
via override.
The `ProbeFreePorts()` function now respects the override, by reading
the `GUIConfiguration.Address()` method instead of using hard-coded
defaults.
When not calling `ProbeFreePorts()`, the override should still be
persisted rather than the default address. This happens only when
generating a fresh default `config.xml`, never on an existing one.
This adds `allow_contributor: true` which allows approvals by
contributors to the PR (but still not the author themself, which is a
different thing). This allows things like pushing minor fixups while
also approving.
The `ignore_update_merges: true` option makes it so that someone is not
considered a "contributor" just because they push the merge button to
update the branch. In principle this is not needed given the above, but
I like it for clarity.
### Purpose
This closes#9400 by always expanding tildes when parent/subdir checks
are done.
### Testing
I tested this by creating folders with paths to parent or subdirectories
of the default folder that include a tilde in their path as shown in the
attached screenshots.
With this change, overlap will be detected regardless of wether or not
tildes are used in other folder paths.
### Screenshots
Default Folder:
Newly created folder (parent directory in this case)
---------
Signed-off-by: tobifroe <froeltob@pm.me>
### Purpose
As discussed in #9686
Syncthing currently does not check folderstate on remote device before
pulling. If no devices have a valid folderstate (i.e all devices have
the folder paused) it will still attempt to pull. On large folders this
will cause a hanging "Syncing" status.
This checks whether at least one connected device has the file available
and has a valid folderstate.
### Testing
Tested locally on multiple devices.
We're new to Go (all our stuff is Python) so please bear with!
Interested if there may be a better place to slot this in.
Thanks,
Jon
---------
Co-authored-by: Simon Frei <freisim93@gmail.com>
Currently, the "Restart" and "Shutdown" buttons are displayed in the
middle of the Actions menu. On the other hand, the "Log Out" button is
displayed at the very bottom. However, in other cases, e.g. the menus in
operating systems like Windows or macOS, these kind of buttons are
usually grouped together.
Therefore, move the "Restart" and "Shutdown" buttons down, so that they
are listed together with the "Log Out" button. Also, change the order,
so that it goes from the least impactful ("Log Out") to the most
impactful ("Shutdown").
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Screenshots
#### Before
#### After
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Purpose
This fixes#9775. I also improved the comments as they were lacking.
My apologies for introducing this bug. In summary, the bug was
```
mode = mode ^ (ModeSymlink | ModeIrregular)
```
didn't correctly reset those bits. This correctly resets them:
```
mode = mode &^ ModeSymlink &^ ModeIrregular
```
Tested and working in Windows 11 version 10.0.22631.4317. I didn't test
in other versions, but I'm sure this is the only issue.
Currently we log on every single one of 10 retries deep in the upnp
stack. However we also return the failure as an error, which is bubbled
up a while until it's logged at debug level. Switch that around, such
that the repeat logging happens at debug level but the top-level happens
at info. There's some chance that this will newly log errors from
nat-pmp that were previously hidden in debug level - I hope those are
useful and not too numerous.
Also potentially this can even close#9324, my (very limited)
understanding of the reports/discussion there is that there's likely no
problem with syncthing beyond the excessive logging, it's some weird
router behaviour.
These CSS overrides address issues that are already present on wider
screens, so apply it there. Some experiments show we might even want to
up the limit more, but I am chicken and lazy, so I propose to use the
existing 470px media block.
Supersedes another PR after not getting any reaction to feedback there:
https://github.com/syncthing/syncthing/pull/9591#issuecomment-2212586134
Co-authored-by: Jakob Borg <jakob@kastelo.net>
As discussed in
https://github.com/syncthing/syncthing/pull/9175#discussion_r1730431703,
entries in advanced settings are unusable if they are comprised of a
list of objects. It just displays `[object Object], [object Object],
[object Object]`, e.g. for the devices a folder is shared with.
Filter out these config elements by detecting an array whose members are
not all strings or numbers, and setting them to `skip` type.
Fix some unnecessary repetition in calling `inputTypeFor()`, since it is
already cached in the `ng-init` directive.
### Purpose
Fixes#9776 by tweaking the text/background colours of disabled checkbox
panels when dark mode is enabled.
It was [noted on that
issue](https://github.com/syncthing/syncthing/issues/9776#issuecomment-2424828520)
that there's a bigger issue around the correctness of using the
`disabled` attribute on a `<div>` in the first place, but this PR does
not attempt to change that.
### Testing
I've hooked up the GUI files against a release build as suggested below.
### Screenshots
Using the dark theme, or the default theme with a system dark scheme:
Using the black theme:
These borrow the colours from dark theme text inputs and black theme
tabs for a consistent look (initially I tried the text colour of
disabled text inputs, but that produced some poor contrast).
Skipping these makes the sequence numbering inconcistent; we've received
a file and suppsedly added it to the database, but if you check the
sequence number afterwards it didn't increase, i.e., we trigger [this
failure
condition](47f48faed7/lib/model/indexhandler.go (L447-L459))
and, similarly, a future update will look like there was a hole in the
numbering.
I propose to at least temporarily remove this optimisation in order for
things to make more sense. Is there a reason to keep this beyond saving
some database operations?
This should prevent the panic that occurred in this test run:
https://github.com/syncthing/syncthing/actions/runs/11095876010/job/30825046810
```
2024-09-29T21:01:53.5425372Z === RUN TestIssue4357
2024-09-29T21:01:53.5505943Z panic: runtime error: integer divide by zero [recovered]
2024-09-29T21:01:53.5512200Z panic: runtime error: integer divide by zero
2024-09-29T21:01:53.5516633Z
2024-09-29T21:01:53.5523018Z goroutine 2655 [running]:
2024-09-29T21:01:53.5524157Z github.com/thejerf/suture/v4.(*Supervisor).runService.func2.2()
2024-09-29T21:01:53.5527176Z /home/runner/go/pkg/mod/github.com/thejerf/suture/v4@v4.0.5/supervisor.go:563 +0xd0
2024-09-29T21:01:53.5530556Z panic({0x1080d20?, 0x1851290?})
2024-09-29T21:01:53.5564723Z /home/runner/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.23.1.linux-amd64/src/runtime/panic.go:785 +0x132
2024-09-29T21:01:53.5566616Z github.com/syncthing/syncthing/lib/model.(*model).numHashers(0xc0006f6180, {0x117dc1a, 0x7})
2024-09-29T21:01:53.5568061Z /home/runner/work/syncthing/syncthing/lib/model/model.go:2581 +0x210
2024-09-29T21:01:53.5569912Z github.com/syncthing/syncthing/lib/model.(*folder).scanSubdirsChangedAndNew(0xc00c38c808, {0x0, 0x0, 0x0}, 0xc0003fc060)
2024-09-29T21:01:53.5571612Z /home/runner/work/syncthing/syncthing/lib/model/folder.go:653 +0x250
2024-09-29T21:01:53.5573010Z github.com/syncthing/syncthing/lib/model.(*folder).scanSubdirs(0xc00c38c808, {0x0, 0x0, 0x0})
2024-09-29T21:01:53.5574447Z /home/runner/work/syncthing/syncthing/lib/model/folder.go:512 +0xd0f
2024-09-29T21:01:53.5576011Z github.com/syncthing/syncthing/lib/model.(*folder).scanTimerFired(0xc00c38c808)
2024-09-29T21:01:53.5577367Z /home/runner/work/syncthing/syncthing/lib/model/folder.go:916 +0x46
2024-09-29T21:01:53.5579010Z github.com/syncthing/syncthing/lib/model.(*folder).Serve(0xc00c38c808, {0x1307650, 0xc0006a0910})
2024-09-29T21:01:53.5580428Z /home/runner/work/syncthing/syncthing/lib/model/folder.go:205 +0xd7e
2024-09-29T21:01:53.5581624Z github.com/thejerf/suture/v4.(*Supervisor).runService.func2()
2024-09-29T21:01:53.5582978Z /home/runner/go/pkg/mod/github.com/thejerf/suture/v4@v4.0.5/supervisor.go:567 +0x249
2024-09-29T21:01:53.5584400Z created by github.com/thejerf/suture/v4.(*Supervisor).runService in goroutine 2651
2024-09-29T21:01:53.5585872Z /home/runner/go/pkg/mod/github.com/thejerf/suture/v4@v4.0.5/supervisor.go:541 +0x32a
2024-09-29T21:01:53.5661413Z FAIL github.com/syncthing/syncthing/lib/model 5.510s
```
### Testing
I have not been able to reproduce the panic throughout a few minutes of
continuously running the test without this fix, but judging by the
traceback it seems to only happen if the test happens to delete the
folder from config at the same time `scanTimerFired` triggers.
### Purpose
Syncthing had a healthcheck API for a while, and the example Dockerfile
for it has it in the form of:
HEALTHCHECK --interval=1m --timeout=10s \
CMD curl -fkLsS -m 2 127.0.0.1:8384/rest/noauth/health | grep -o
--color=never OK || exit 1
Let's add it to the docker-compose as well
### Testing
I use this docker-compose.yml file to deploy via ansible (using
community.docker.docker_compose_v2) to my machine with success, using
`wait: true` in ansible for it to use `docker compose up --wait`.
```yml
- name: Enable syncthing docker
community.docker.docker_compose_v2:
project_src: /srv/syncthing
wait: true
wait_timeout: 90
```
In ignores, normalize the input when parsing it.
When scanning, normalize earlier such that the path is already
normalized when checking ignores. This requires splitting normalization
of the string from normalization of the file, as we don't want to
attempt the latter if the file is ignored.
Closes#9598
---------
Co-authored-by: Jakob Borg <jakob@kastelo.net>
There was a bug that the unique ID was not set when reporting was
enabled, and thus the reports where rejected by the server. The unique
ID got set only on startup, so next time Syncthing restarted.
This makes sure to set the unique ID when blank.
I can see already in our Sentry data that there are a fair amount of
these warnings, and mostly the shape of it. Asking users to report them
will likely cause a lot of reporting effort to fairly little additional
value. We can do that when/if we have something more targeted to ask
for.
This codifies a review policy which is closer to what I always
envisioned, but which isn't expressible using the normal checks in the
GitHub GUI. It would move the commit approval check from GitHub into the
policy-bot check which is already present to enforce the
conventional-commits standard. Approvals in general would still work the
same -- it's just that the bot picks it up and toggles the status
accordingly. From a GitHub side when this is enabled we'd remove the
requires-review check from there and let the bot decide that part. We
would still require builds and tests to pass of course.
There are a couple of relexations from the current policy, details in
the code but briefly:
- Changes to translations or dependencies by a trusted person don't
require review
- Trivial changes by a trusted person, explicitly marked as such, don't
require review
This enables less bureaucracy for things like adding new translated
languages and updating dependencies, and enables the trivial-change
workflow to a larger audience than, like, me, who could always just
bypass the rules by way of being admin.
