For consistency with syncOwnership explanation right above this one, the
sentence should talk about "sending ownership information", and not just
"sending ownership".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Duplicate the regular expression for single and double quotes.
Support additional arguments (string substitution) in both variants.
Simplify the translation string group matching by using a lazy
quantifier instead of excluding the quote itself.
This adds support for syncing extended attributes on supported
filesystem on Linux, macOS, FreeBSD and NetBSD. Windows is currently
excluded because the APIs seem onerous and annoying and frankly the uses
cases seem few and far between. On Unixes this also covers ACLs as those
are stored as extended attributes.
Similar to ownership syncing this will optional & opt-in, which two
settings controlling the main behavior: one to "sync" xattrs (read &
write) and another one to "scan" xattrs (only read them so other devices
can "sync" them, but not apply any locally).
Co-authored-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the code contains a "mobile phone" fix to allow wrapping of
long lines in table heading and cells. However, the fix is applied to
all screen sizes equal or below 768 px wide, which causes the layout to
break on tablet-sized screens.
The commit moves the "mobile" fix to the actual mobile media query,
which is applied to screens up to 419 px wide. It is only really needed
there, where it synergises with the existing fix that changes table cell
display to "block". There is no need to wrap the text on larger screens,
as there is more than enough space to display the lines in full on them.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The current code checks whether the same-named item exists in the tree,
and when it does, it re-uses it when adding new children to it. However,
the code doesn't check whether the existing item is a folder or a file.
It rather assumes that it is always a folder, which is not necessarily
the case.
This commit adds a new check to the code, so that the existing element
is reused only when it is a folder, and ignored otherwise.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the error message is often quite long and thus it appears
truncated with no possibility for the user to view the full string.
Thus, add a tooltip that displays the message in full on hover. This
follows the convention used in other parts of the GUI in similar cases.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
These strings no longer exist in the GUI, hence there is no need to keep
them in the translation json files either.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: Jakob Borg <jakob@kastelo.net>
* lib/locations: Fix enum values camelCase.
* lib/locations: Remove unused FailuresFile.
* cmd/syncthing: Turn around role of locations storage.
Previously the locations package was used to provide default paths,
possibly with an overridden home directory. Extra paths supplied on
the command line were handled and passed around in the options object.
To make the changed paths available to any other interested package,
override the location setting from the option if supplied, instead of
vice versa when not supplied. Adapt code using this to read from the
locations package instead of passing through the options object.
* lib/locations: Refactor showPaths to locations package.
Generate a reusable string in locations.PrettyPrintPaths().
Enumerating all possible locations in different packages is error
prone, so add a new public function to generate the listing as a
string in the locations package. Adapt cmd/syncthing --paths to use
that instead of its own console output.
* lib/locations: Include CSRF token in pretty printed paths.
* lib/api: New endpoint /rest/system/paths.
The paths should be available for troubleshooting from a running
instance. Using the --paths CLI option is not easy in some
environments, so expose the locations mapping to a JSON endpoint.
Add utility function ListExpandedPaths() that also filters out any
entries which still contain variable placeholders.
* gui: List runtime paths in separate log viewer tab.
* Wrap paths.
* lib/syncthing: Utilize locations.Get() instead of passing an arg.
* Include base directories, move label to table caption.
* gui: Switch to hard-coded paths instead of iterating over all.
* gui: Break aboutModalView into tabs.
Use tabs to separate authors from included third-party software.
* gui: Move paths from log viewer to about modal.
* lib/locations: Adjust pretty print output order to match GUI.
* gui, authors: Remove additional bot names and fix indent.
The indentation changed because of the tabbed about dialog, fix the
authors script to respect that.
Skip Syncthing*Automation in authors list as well.
* Update AUTHORS list to remove bot names.
* Revert AUTHORS email order change.
* Do not emphasize DB and log file locations.
* Review line wrapping.
* review part 1: strings.Builder, naming
* Rename and extend locations.Set() with error handling.
Remodel the Override() function along the existing SetBaseDir() and
rename it to simply Set(). Make sure to use absolute paths when given
log file or GUI assets override options. Add proper error reporting
if that goes wrong.
* Remove obsolete comment about empty logfile option.
* Don't filter out unexpanded baseDir placeholders, only ${timestamp}.
* Restore behavior regarding special "-" logfile argument.
If the option is given, but with empty value, assume the no log
file (same as "-"). Don't try to convert the special value to an
absolute path though and document this fact in a comment for the Set()
function.
* Use template to check for location key validity.
* Don't filter out timestamp placeholders.
* lib/api: Remove paths from /rest/system/status.
* lib/ur: Properly initialize map in failure data (fixes#8479)
Co-authored-by: Jakob Borg <jakob@kastelo.net>
Currently, there are two issues with the detailed staggered versioning
information displayed in the folder info. Firstly, the maxAge value of
365d is displayed despite matching the default. Secondly, there is no
consideration for the special case of maxAge equal to 0, meaning that
versions are kept forever.
This commit fixes both of those issues, so that the default maxAge is
not displayed and its value of 0 is displayed as "forever".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Currently, the filesystem watcher explanation in the Advanced tab in the
Edit Folder modal window is split into two parts. The first is location
in a tooltip that is visible only when hovering the mouse over the small
checkbox, which makes it not easily accessible, e.g. for new or touch
screen users.
No other settings in the Edit Folder window have their explanation
presentend like that. When needed, it is always displayed in their
respective help blocks, which are always visible on the screen. Thus,
move the filesystem watcher explanation from the tooltip to the help
block, merging it with the other part of the explanation in the process.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Use discovered IDs from cache when adding a new remote device.
The GUI already does refreshDiscoveryCache() when it comes online and
on every 10 second refresh cycle. Querying the same information
freshly in addDevice() seems unnecessary and adds some more round-trip
delay on a possibly slow network link. Instead use the IDs from the
existing discoveryCache property to populate the suggested ID list.
* Increase maximum suggested device ID count to 100.
For the auto-completion list, which is hidden by default and filtered
by the browser, we can offer more discovered device IDs without
causing much confusion. The list of suggested "nearby" devices is
still limited to the first five.
* Rename $scope.discoveryUnknown.
The old name "discovery" was pretty ambiguous..
This commit updates Fork Awesome from version 1.1.2 from 2018 to version
1.2.0 from 2021. The changes are few and non-breaking, consisting mainly
of new icon additions.
It is worth to note that the new version includes also a Syncthing icon,
which was not present before.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Similar to the "remote has not accepted sharing" message, add a
footnote number 2 to indicate a folder which will not sync with a
certain device because the remote has paused it. Applies to the edit
folder / device modals' sharing tab, as well as the "shared with"
listing and tooltips under device and folder details.
Currently, the "Latest Change" translation string is hard-coded to use
the English-like word order of V ("deleted") + N ("file"). As such, it
is incompatible with languages that require to use a different word
order, e.g. Korean or Japanese. In other words, a proper translation of
the string to those languages is currently impossible.
This commit changes the translation string, so that it includes the file
variable, and thanks to this, it can be easily adopted to languages with
different word order than English.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* lib/api: Note ItemStarted and ItemFinished for default filtering.
The reasoning why LocalChangeDetected and RemoteChangeDetected events
are not included in the event stream by default (without explicit
filter mask requested) also holds for the ItemStarted and ItemFinished
events. They should be excluded as well when we start to break the
API compatibility for some reason.
* gui: Enumerate unused event types in the eventService.
Define constants for the unused event types as well, for completeness'
sake. They are intentionally not handled in the GUI currently.
* cmd/syncthing: Harmonize uppercase CLI argument placeholders.
Use ALL-UPPERCASE and connecting dashes to distinguish argument
placeholders from literal argument options (e.g. "cpu" or "heap" for
profiling). The dash makes it clear which words form a single
argument and where a new argument starts.
This style is already used for the "syncthing cli debug file" command.
* lib/model: Simplify event data structure.
Using map[string]interface{} is not necessary when all values are
known to be strings.
Add a link next to each setting's label to its explanation in the Docs.
This way, it is easy to quickly check what the setting is about without
going to the Docs site separately and searching for it manually.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Right now, the Trash Can versioning info text is displayed for both the
Trash Can and Simple versioning. However, the Simple versioning has its
own info text that is also displayed, which results in two very similar
sentences being shown on the screen.
This commit limits the Trash Can info text to be displayed only when the
Trash Can versioning is selected, and moves the Simple versioning info
text up to the same location as the other one.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Even though technically possible, CJK languages normally don't use
italic text at all, as not only does it make the characters/letters look
unnatural, but also, in the case of complex characters, unreadable too.
For these reasons, it is usually recommended not to use the italic font
style at all [1][2].
This commit changes the default font-style of the i element for Chinese,
Japanese, and Korean langauge to "normal" instead of "italic". In order
to do so, the HTML lang attribute is also changed following each change
of the GUI language.
[1] https://bobtung.medium.com/best-practice-in-chinese-layout-f933aff1728f
[2] https://devblogs.microsoft.com/oldnewthing/20060914-02/?p=29743
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Staggered File Versioning used to have its own cleanInterval that
controlled how often file versions were cleaned. Nowadays, there is a
seperate setting called cleanupIntervalS responsible for the cleanup,
which applies to all File Versioning (except External). Thus, remove the
unneeded code and don't set the param up on new folders anymore.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Allow to translate and fix incorrect Versions date filter ranges
Translate the previously English-only ranges used in Versions date
filter. In the process, fix the currently incorrect range calculation.
For instance, let us say it is 08:05. Selecting "today" should set the
range to start at 00:00 and end at 08:05. However, what really happens
is that both start and end are set to 08:05, and as a result "today" is
never shown to the user. The case is the same for "yesterday", which in
contrary to "today" is shown, but its range is fixed at 08:05 on the
previous day.
This commit fixes the above by always calculating "today" starting at
00:00 up to the current moment, and calculating "yesterday" from 00:00
on the previous to 00:00 on the current day.
When it comes to "last x days", the commit fixes the calculation so that
it actually covers the whole day, which is done by moving the start date
to 00:00 on the first day.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The ignoreDelete warning code originally comprised of two sentences,
which in total were much longer than the current one. Because of that,
some additional fixes were added to make it present itself better, e.g.
white-space was set to normal to allow for text wrap on narrow screens,
and the help link was moved to a new line to make sure both the anchor
and the question mark always stayed together.
However, the code fixes remained despite the final text being much
shorter than the original. Therefore, remove the unnecessary white-space
formatting, and also move the help link right next to the warning. This
makes it clear that the link is related to this particular warning when
both it and the ignore patterns warning are displayed at the same time.
Ref: https://github.com/syncthing/syncthing/pull/8054#issuecomment-978148117
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Translate fancytree messages in Versions modal
Currently, the default fancytree info/error messages are used. This
means that a) they are English-only, and b) they are very generic. With
this commit, the messages are added to the translatable strings, and
they are also more specifically related to file versioning.
On a side note, the "moreData" string has been left out on purpose, as
it is not used in the current code. It can be added later if needed.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* gui: Make ID read-only and hide nearby devices when adding pending devices (fixes#8083)
Currently, there is no distinction between adding "new" and "pending"
devices. For this reason, the user is always presented with a list of
"nearby devices" to choose from. This commit adds such distinction to
the code, and in the case of "pending" device, both the device ID is
made read-only and the nearby devices list is hidden.
As a by-product of the function rename and clean-up, this commit also
hides the non-functional "remove" button that is shown when editing
device defaults.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Use indexOf instead of startsWith to make the now translatable theme
names appear correctly in IE11. This also prevents console log error
spam in the browser. The same problem was previously reported in #6940.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Add each subdirectory of the guiDir as a translation candidate string.
The key is prefixed with "theme-name-" and the default English
translation corresponds to the directory name turned to title case.
Disable the automatic name mangling in the GUI JS code in favor of
just looking up the translation.
Currently, the default sorting of the file list in the Restore Versions
modal in both case sensitive, and it also does not distinguish between
files and folders. With this change, which uses a slightly modified code
from the fancytree itself (with added folder prioritisation), the sort
becomes case insensitive and also always places folders on top. This is
to make it behave more similar to what file managers do in the commonly
used operating systems (including popular Linux desktop environments).
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
This reverts commit cca17f5306.
Using textarea instead of input makes it possible to enter new lines,
which then are added to config.xml as "
". This breaks the whole
script, because these characters are passed to the command line as "\n".
Therefore, the script should rather remain a single-lined input field.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The list of unshared devices is built from deviceList(), which sorts
the result. But the shared devices are listed in undefined order from
the unsorted currentFolder.devices array. Apply the same sorting
after building the array used in the dialog.
Currently, the dismiss button is displayed as the first of the three
buttons. However, the most common action that the user wants to do when
sharing a new folder is to add it on a different device. Because of
this, the add button should be displayed first as the most prominent of
the three. The ignore button is the opposite of the add button, and also
results in a parmenent action, hence it makes sense to lump the two
together. Thus, the dismiss button should be moved to the last place as
an alternative to the two main actions, when the user is yet unsure what
they want to do with the notification.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
1. Change each modal title text to match the action that is being
executed (i.e. "Revert" to "Revert Local Additions", "Override" to
"Override Changes", "Delete" to "Delete Unexpected Items").
2. Change the icons to match the icons used by each action (i.e. arrow-
circle-down for Revert, arrow-circle-up for Override). Replace the
broken lock icon for Delete with minus-circle.
3. Rearrange the order in the modal HTML code to simplify it a little.
Disable the Versions button when the folder is paused, because it does
not work, i.e. the versioned files are not loaded. The folder needs to
be unpaused to actually be able to view the versioned file list.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
No longer hide the web UI controls for the new untrusted/encrypted
device feature. Testing hasn't been very widespread, but there has been
some and quite a few bugs have been caught and fixed. I believe its time
to not hide it anymore, and cautiously recommend usage. E.g. mention
that the feature hasn't been widely used yet and anyone using it is an
early adopter, but drop the bit about not using it with production data.
We can maybe stress the need for backups in general and especially
using this.
Remove the animation due to its excessive CPU usage, especially when a
large number of files is being downloaded and listed at the same time.
Also, remove the stripes, as they serve no purpose in the now-static
progress bar.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The current text gives an impression that we are currently using a
Receive Encrypted folder, even if we are not. Thus, make the current
text displayed only when the folder is in fact Receive Encrypted, and
add a new string to be displayed when using different folder types.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Disabled options are currently barely distinguishable from enabled
ones. This changes their background to grey, following the Bootstrap
defaults already used for disabled <select>.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Apply to table headers the same code as already used for table data.
This way, the headers will be either pushed to the next line, or cut
with an ellipsis if the single word is too long.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Move the "Last seen" field to the very top in the device information.
This way, if a device has disconnected unexpectly, we can quickly check
the time when it was last available. Right now, due to the very long
address field, it is usually necessary to scroll down in order to view
the "Last seen" field.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
If there are no folders present, show only the "Add Folder" button, and
hide the "Rescan All" button. Only show the latter when at least one
folder exists.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
The button does nothing when the External Versioning is being used, so
it should not be displayed at all to avoid confusing the users.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
As for right now, the External File Versioning does not support Cleanup
Interval. Therefore, the option should no be available at all when using
it.
Ref: https://forum.syncthing.net/t/16346
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* lib/db: Add ExpirePendingFolders().
Use-case is to drop any no-longer-pending folders for a specific
device when parsing its ClusterConfig message where previously offered
folders are not mentioned any more.
The timestamp in ObservedFolder is stored with only second precision,
so round to seconds here as well. This allows calling the function
within the same second of adding or updating entries.
* lib/model: Weed out pending folders when receiving ClusterConfig.
Filter the entries by timestamp, which must be newer than or equal to
the reception time of the ClusterConfig. For just mentioned ones,
this assumption will hold as AddOrUpdatePendingFolder() updates the
timestamp.
* lib/model, gui: Notify when one or more pending folders expired.
Introduce new event type FolderOfferCancelled and use it to trigger a
complete refreshCluster() cycle. Listing individual entries would be
much more code and probably just as much work to answer the API
request.
* lib/model: Add comment and rename ExpirePendingFolders().
* lib/events: Rename FolderOfferCancelled to ClusterPendingChanged.
* lib/model: Reuse ClusterPendingChanged event for cleanPending()
Changing the config does not necessarily mean that the
/resut/cluster/pending endpoints need to be refreshed, but only if
something was actually removed. Detect this and indicate it through
the ClusterPendingChanged event, which is already hooked up to requery
respective endpoints within the GUI.
No more need for a separate refreshCluster() in reaction to
ConfigSaved event or calling refreshConfig().
* lib/model: Gofmt.
* lib/db: Warn instead of info log for failed removal.
* gui: Fix pending notifications not loading on GUI start.
* lib/db: Use short device ID in log message.
* lib/db: Return list of expired folder IDs after deleting them.
* lib/model: Refactor Pending...Changed events.
* lib/model: Adjust format of removed pending folders enumeration.
Use an array of objects with device / folder ID properties, matching
the other places where it's used.
* lib/db: Drop invalid entries in RemovePendingFoldersBeforeTime().
* lib/model: Gofmt.
My local gofmt did not complain here, strangely...
* gui: Handle PendingDevicesChanged event.
Even though it currently only holds one device at a time, wrap the
contents in an array under the "added" property name.
* lib/model: Fix null values in PendingFoldersChanged removed member.
* gui: Handle PendingFoldersChanged event.
* lib/model: Simplify construction of expiredPendingList.
* lib/model: Reduce code duplication in cleanPending().
Use goto and a label for the common parts of calling the DB removal
function and building the event data part.
* lib/events, gui: Mark ...Rejected events deprecated.
Extend comments explaining the conditions when the replacement event
types are emitted.
* lib/model: Wrap removed devices in array of objects as well.
* lib/db: Use iter.Value() instead of needless db.Get(iter.Key())
* lib/db: Add comment explaining RemovePendingFoldersBeforeTime().
* lib/model: Rename fields folderID and deviceID in event data.
* lib/db: Only list actually expired IDs as removed.
Skip entries where Delete() failed as well as invalid entries that got
removed automatically.
* lib/model: Gofmt
This fixes a regression by restoring two functions removed in commit
a20d85d451, but still used from the HTML
template. Adjust the restored versions to access the new flag storage
structure.
The replacement functions selectAllSharedFolders() and
selectAllUnrelatedFolders() are not functional, so this is just a
quick fix to restore a working state before making the new functions
actually work sensibly.
Just like the respective functions for sharing device selections, give
it a boolean argument instead of writing two almost identical
functions.
In line with the other selectAll...() functions, avoid calling
angular.forEach() and iterate over the folders object directly.
When using a Web browser with JavaScript either disabled or unavailable,
show a warning to let the user know that the Web GUI requires JS in
order to operate.
To achieve this, add a <div> that wraps both the navbar and the main
content, and then move the CSS class ng-cloak from the <html> element to
that <div>. This way, only the JavaScript-dependent part is hidden when
JS is unavailable, and not the whole website, as it is the case right
now. Then, add a <noscript> element right at the start of the <body>
element, so that the warning is also shown right away in text-based Web
browsers. The <noscript> element includes a stripped down version of the
navbar showing only the Syncthing logo, and then a container with the
warning itself. Lastly, leave the footer untouched and always visible,
because it does not rely on JavaScript at all.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: Jakob Borg <jakob@kastelo.net>
Use indexOf() == 0 instead of startsWith() to maintain compatibility
and prevent JavaScript error console spam in the Web GUI when used in
Internet Explorer 11 under Windows 7.
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
* Add clean up for Simple File Versioning pt.1
created test
* Add clean up for Simple File Versioning pt.2
Passing the test
* stuck on how javascript communicates with backend
* Add trash clean up for Simple File Versioning
Add trash clean up functionality of to allow the user to delete backups
after specified amount of days.
* Fixed html and js style
* Refactored cleanup test cases
Refactored cleanup test cases to one file and deleted duplicated code.
* Added copyright to test file
* Refactor folder cleanout to utility function
* change utility function to package private
* refactored utility function; fixed build errors
* Updated copyright year.
* refactor test and logging
* refactor html and js
* revert style change in html
* reverted changes in html and some js
* checkout origin head version edit...html
* checkout upstream master and correct file
